SinglFuse SF-0603S Series Features n Slow blow thin film chip fuse for overcurrent protection n 608 (EI 0603) miniature footprint n Surface mount packaging for automated assembly n UL listed (UL 248-4) n RoHS compliant* and halogen free** Electrical Characteristics Model Rated Current (mps) SF-0603S040 0.40 Fusing ime Resistance (mω) yp.*** 350 Rated Voltage *** Resistance value was measured with less than 0 % of rated current. olerance ±25 %. ****ypical I 2 t value is measured at 0x rated current. reaking Capacity ypical I 2 t ( 2 s) **** 0.004 DC 50 V / SF-0603S050 0.50 232 DC 50 V C 35 V 50 0.009 SF-0603S063 0.63 50 0.07 SF-0603S070 0.70 48 0.023 SF-0603S080 0.80 3 0.024 SF-0603S.00 67 0.026 SF-0603S25.25 Open within 5 sec. 50 0.057 SF-0603S50.50 at 250 % rated 42 0.08 SF-0603S60.60 40 DC 32 V / 0.086 current SF-0603S200 2.00 27 DC 32 V C 35 V 0.5 SF-0603S250 2.50 9.5 50 0.200 SF-0603S300 3.00 6 0.20 SF-0603S35 3.5 5 0.279 SF-0603S400 4.00 0.326 SF-0603S500 5.00 8 0.622 SF-0603S600 6.00 6 2.700 Reliability esting No. est Requirement est Condition Carrying Capacity No fusing Rated current, 4 hours 2 Fusing ime ithin 5 seconds 250 % of its rated current 3 Interrupting bility No mechanical damages 4 ending est No mechanical damages fter the fuse is interrupted, rated voltage applied for 30 seconds again Distance between holding points: 90 mm, ending: 3 mm, time, 30 seconds 5 Resistance to Solder Heat ±20 % 260 C ±5 C,0 seconds ± second 6 Solderability 95 % coverage minimum 7 emperature Rise <75 C 235 C ±5 C, 2 ±0.5 second 245 C ±5 C, 2 ±0.5 second (lead free) % of its rated current, measure of surface temperature 8 Resistance to Dry Heat ±20 % 05 C ±5 C,0 hours 9 Resistance to Solvent No evident damage on protective coating and marking 23 C ±5 C of isopropyl alcohol, 90 seconds 0 Residual Resistance 0k ohms or more Measure DC resistance after fusing hermal Shock DR < 0 % -20 C / +25 C /+25 C /+25 C, 0 cycles gency Recognition UL File Number... E98545 Environmental Characteristics Operating emperature...-20 C to +05 C Storage Conditions emperature...+5 C to +35 C Humidity...40 % to 75 % Shelf Life... 2 years from manufacturing date Moisture Sensitivity Level... ESD Classification (HM)...Class 6 RNING Cancer and Reproductive Harm www.p65arnings.ca.gov * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 20/65/EU June 8, 20. ** ourns considers a product to be halogen free if (a) the romine (r) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total romine (r) and Chlorine (Cl) content is 500 ppm or less. SinglFuse is a trademark of ourns, Inc. he products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SinglFuse SF-0603S Series pplications n Portable memory n LCD monitors n Disk drives n PDs n Digital cameras n DVDs n Cell phones n Rechargeable battery packs n attery chargers n Set top boxes n Industrial controllers Solder Reflow Recommendations 250 Peak: 250 +0/-5 C 230 C or higher EMPERURE ( C) 200 50 80 C 50 C PRE-HEING ZONE 90 ± 30 Seconds PEK: 250 +0/-5 C, 5 seconds PRE-HEING ZONE: 50 to 80 C, 90 ± 30 seconds SOLDERING ZONE: 230 C or higher, 30 ± 0 seconds 30 ± 0 Seconds SOLDERING ZONE 50 HEING IME Product Dimensions.6 ± 0. (.063 ±.004) 0.45 ± 0. (.08 ±.004) Recommended Pad Layout 0.8 ± 0. (.03 ±.004) 0.8 ± 0. (.03 ±.004) 0.35 ± 0.2 (.04 ±.008) 0.35 ± 0.2 (.04 ±.008) 0.9 ± 0. (.035 ±.004) 0.3 ± 0.2 (.02 ±.008) 0.3 ± 0.2 (.02 ±.008) 0.45 ± 0. DIMENSIONS: MM (INCHES) 2. ± 0. (.083 ±.004) Packaging Quantity hermal Derating Curve 5,000 pieces per 7-inch reel PERCEN OF RING (%) 20 0 90 80-20 0 20 40 MIEN EMPERURE ( C) 60 80 20 Construction & Material Content OVERCO Sn PLING FUSE ELEMEN Cu / Ni PLING CERMIC SUSRE
verage ime Current Curves Minimum I 2 V Clear ime Curves.50.25.00 0.70 0.63 0.50 0.40.60 2.00 2.50 3.00 3.5 4.00 5.00 6.00 0 6.00 5.00 4.00 3.5 3.00 2.50 2.00.60.50.25.00 0.80 0 0.63 0.50 CLERING IME (S) 0. MIN. I2 (2 SEC) 0. 0.40 0.0 0.0 0.00 0. 0 CURREN () 0.00 0.00 0.0 0. CLERING IME (S) ypical Part Marking Represents total content. Layout may vary. RED CURREN () E = 0.40 N =.60 F = 0.50 S = 2.00 I = 0.63 = 2.50 J = 0.70 3 = 3.00 K = 0.80 U = 3.5 L =.00 = 4.00 M =.25 Y = 5.00 P =.50 6 = 6.00 How to Order SinglFuse Product Designator SMD Footprint 608 (EI 0603) size Fuse low ype S = Slow blow Rated Current 040-600 (400 m - 6.00 ) Packaging ype - 2 = ape & Reel (5,000 pcs./reel) SF - 0603 S 040-2 REV. J 0/9
SF-0603S Series ape and Reel Specifications SF-0603S Series ape Dimensions per EI 48-2 8.0 ± 0.2 (.35 ±.008) P 0 4.0 ± 0. (.57 ±.004) P 4.0 ± 0. (.57 ±.004) P 2 2.0 ± 0.05 (.079 ±.002) F E. ± 0. (.043 ±.004).9 ± 0. (.075 ±.004) 3.5 ± 0.05 (.38 ±.002).75 ± 0. (.069 ±.004) D 0.5 + 0./-0 (.059 +.004/-0) 0.64 ± 0. (.025 ±.004) Reel Dimensions Min. C 80 +0/-3.0 (7.087 +0/-.8) 60.0 (2.362) 3.0 ±.0 (.52 ±.039) 9.0 ±.0 (.354 ±.039).4 ± 2.0 (.449 ±.079) DIMENSIONS: MM (INCHES) DI. DI. C DI. OOM PE OP PE D O P O F E PPER PE RESISOR PE P P 2 DIRECION OF UNREELING
Legal Disclaimer Notice his legal disclaimer applies to purchasers and users of ourns products manufactured by or on behalf of ourns, Inc. and Unless otherwise expressly indicated in writing, ourns products and data sheets relating thereto are subject to change and complete before placing orders for ourns products. he characteristics and parameters of a ourns product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on ourns knowledge of typical requirements in generic applications. he characteristics and parameters of a ourns product with other components the actual performance of the ourns product as meeting the requirements of a particular industry of ourns products are responsible for ensuring compliance with safety-related requirements and standards applicable to ourns on a case-by-case basis, use of any ourns ourns standard products that are suitable for use in aircraft standard the user s sole risk. custom products shall be negotiated on a case-by-case basis by ourns and the user for which such ourns standard products shall also apply to such ourns custom products. Users shall not sell, transfer, export or re-export any ourns ourns products and ourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. ourns products may not, without bilingual versions are available at: eb Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/legal/disclaimer.pdf