> Series 6, 24 and 25 mini-cylinders Series 6, 24 and 25 mini-cylinders Series 6: ø 8, 0, 2 mm Series 24: ø 6, 20, 25 mm - magnetic Series 25: 6, 20, 25 mm - magnetic, cushioned» Single-acting and double-acting» Standard CETOP RP52P DIN/ISO 6432» Stainless steel rod and barrel» Anodized aluminium end-blocks Series 6, 24 and 25 mini-cylinders are designed according to the European Standard Specifications CETOP RP52-P and DIN/ISO 6432. The choice of materials and other design features have provided the basis for a complete range of versatile and very reliable cylinders. The precise method of crimping the barrel at the head and cap ensures that all the parts are perfectly aligned. Since the Series 6 and 24 may operate at very high speeds, bumpers are attached to the piston as standard in order to reduce noice and wear resulting from high impact loads. Series 24 and 25 are suitable for mounting magnetic proximity switches. Series 25 has an adjustable pneumatic cushion and a magnetic piston. Various mounting accessories are available to enable the cylinders to function in a variety of applications. GENERAL DATA Type of construction Operation Materials Brackets Stroke min - max crimped single-acting and double-acting anodized aluminium end-caps - stainless steel barrel and rod, aluminium piston - NBR/PU seals, other parts: see the coding example rod end - flange - feet - trunnion Series 6 ø 8 ø 0: 0-250 mm / Series 6: ø 2: 0-300 mm / Series 24 & 25 ø 6: 0-600 mm; ø 20 - ø 25: 0-000 mm Bores Series 6: ø 8, 0, 2 / Series 24 & 25: ø 6, 20, 25 Operating temperature Operating pressure Fluid Speed 0 C 80 C (with dry air -20 C) 0 bar (double-acting); 2 0 bar (single-acting) filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISO VG32. Once applied the lubrication should never be interrupted. 0 000 mm/sec (without load) Pneutrol International limited, 5 Caulside Drive, Antrim, Northern Ireland, BT4 2DU www.pneutrolspares.com, sales@pneutrol.com, Tel +44 (0) 28 9448 800
> Series 6, 24 and 25 mini-cylinders STANDARD STROKES FOR MINICYLINDERS SERIES 6-24 and 25 = Double-acting = Single-acting STANDARD STROKES Series Ø 0 25 40 50 80 00 25 60 200 250 300 320 400 500 6 8 6 0 6 2 24 6 24 20 24 25 25 6 25 20 25 25 CODING EXAMPLE 24 N 2 24 N 2 A 6 A 00 A 6 A 00 SERIES 6 = non magnetic 24 = magnetic 25 = magnetic, adjustable cushioning VERSION N = standard OPERATION = single-acting, front spring, no cushion 2 = double-acting 3 = double-acting, through-rod 7 = single-acting, through-rod MATERIALS A = rolled stainless steel AISI 303 rod, stainless steel AISI 304 tube, anodized AL end-blocks BORE 08 = 8 mm - 0 = 0 mm - 2 = 2 mm - 6 = 6 mm - 20 = 20 mm - 25 = 25 mm CONSTRUCTION A = Nose nut Mod. V + Piston rod lock nut Mod. U RL = cylinder with rod lock ø20 - ø25 STROKE (see the table) = standard V = rod seal in FKM W = all seals in FKM, +30 C (for series 25 only) PNEUMATIC SYMBOLS CS02 (s. 6) - CS06 (s. 24) CD0 (s. 6) - CD07 (s. 24) - CD09 (s. 25) CD05 (s. 6) - CD2 (s. 24) - CD3 (s. 25) CS04 (s. 6) - CS0 (s. 24) PNEUMATIC SYMBOLS The pneumatic symbols which have been indicated in the CODING EXAMPLE are shown below. Pneutrol International limited, 5 Caulside Drive, Antrim, Northern Ireland, BT4 2DU www.pneutrolspares.com, sales@pneutrol.com, Tel +44 (0) 28 9448 800
> Series 6, 24 and 25 mini-cylinders ACCESSORIES FOR MINICYLINDERS SERIES 6-24 - 25 Foot mount Mod. B Front/rear flange mount Mod. E Rear trunnion bracket Mod. I Rod fork end Mod. G Swivel ball joint Mod. GA Piston rod socket joint Mod. GY Piston rod lock nut Mod. U Nose nut Mod. V Self aligning rod Mod. GK Coupling piece Mod. GKF All accessories are supplied separately, except for piston rod lock nut Mod. U and nose nut Mod. V Products designed for industrial applications. General terms and conditions for sale are available on www.camozzi.com.
> Series 6, 24 and 25 mini-cylinders Minicylinders Series 6, 24 and 25 Series Ø EW KW BE KK CD D EE D2 Ø L+ XC+ L2+ AM L3 L4 L5 L WF L6 L7 KV SW D D3 front/rear cushion stroke 6 8 8 7 M2x,25 M4x0,7 4 9,3 M5 4 86 64 46 2 0 4,5 2 6 6 9 28 9-5 5 - / - 6 0 8 7 M2x,25 M4x0,7 4,3 M5 4 86 64 46 2 0 4,5 2 6 6 9 28 9-5 5 - / - 6 2 2 8 M6x,5 M6x 6 3,3 M5 6 05 75 50 6 5 4,5 7 9 22 9 38 24 5 20.5 20 - / - 24-25 6 2 8 M6x,5 M6x 6 7,3 M5 6 82 56 6 5 5,5 7 9 22 0 38 24 5 20.5 20 0 / 0 24-25 20 6 0 M22x,5 M8x,25 8 2,3 G\8 8 32 95 68 20 8 8 20 2 24 6 44 32 7 27 27 3 / 5 24-25 25 6 0 M22x,5 M0x,25 8 26,5 G\8 0 4,5 04 69,5 22 20 8 22 2 28 6 50 32 9 27 27 6 / 4 Minicylinders Series 6, 24 and 25 - through-rod once + twice Series Ø KW BE KK D Ø EE D2 Ø L++ L2+ AM L3 L4 L5 WF+ L6 L7+ KV SW front/rear cushion stroke 6 8 7 M2x,25 M4x0,7 9,3 M5 4 02 46 2 0 4,5 2 6 9 28 9 - - / - 6 0 7 M2x,25 M4x0,7,3 M5 4 02 46 2 0 4,5 2 6 9 28 9 - - / - 6 2 8 M6x,5 M6x 3,3 M5 6 26 50 6 5 4,5 7 22 9 38 24 5 - / - 24-25 6 8 M6x,5 M6x 7,3 M5 6 32 56 6 5 5,5 7 22 0 38 24 5 0 / 0 24-25 20 0 M22x,5 M8x,25 2,3 G\8 8 56 68 20 8 8 20 24 6 44 32 7 3 / 5 24-25 25 0 M22x,5 M0x,25 26,5 G\8 0 69,5 69,5 22 20 8 22 28 6 50 32 9 6 / 4
> Series 6, 24 and 25 mini-cylinders Series 24 and 25 minicylinders with rod lock (Mod. RLC) Series Ø G7 D WF L5 L7 XC+ L+ F (N) 24-25 20 8 74 70 94 45 82 300 24-25 25 0 76 70 98 52 89,5 400
> Series 6, 24 and 25 mini-cylinders Foot mount Mod. B Feet and nose nut material: zinc-plated steel. Supplied with: 2x feet x nose nut mod. V Mod. Ø ØAB XS XA+ SA+ AO AU C RX TR US NH B-8-0 8-0 4,5 54 72,5 67 4,5 0,5 2,5 0 25 35 6 B-2-6 2 5,5 64 82,5 7 6 3 3 3 32 42 20 B-2-6 6 5,5 68 9 82 6 3 3 3 32 42 20 B-20-25 20 6,6 80 08 00 8 6 4 20 40 54 25 B-20-25 25 6,6 85,5 3,5 0,5 8 6 4 20 40 54 25 Front/rear flange mount Mod. E Mod. Ø W C ZF+ FB UR TF UF E-8-0 8-0 3,5 2,5 64,5 4,5 40 30 25 E-2-6 2 9 3 75 5,5 53 40 30 E-2-6 6 9 3 8 5,5 53 40 30 E-20-25 20 20 4 96 6,6 66 50 40 E-20-25 25 24 4 0,5 6,6 66 50 40
> Series 6, 24 and 25 mini-cylinders Rear trunnion bracket Mod. I Supplied with: x zinc-plated steel rear trunnion x stainless steel clevis pin 2x steel Seeger Mod. Ø EW ØAB US NH XC+ MR L G2 G G CD C I-8-0 8-0 8 4,5 3, 24 64 5 6 3,5 2,5 20 4 2,5 I-2-6 2 2 5,5 8, 27 75 7 9 5 5 25 6 3 I-2-6 6 2 5,5 8, 27 82 7 9 5 5 25 6 3 I-20-25 20 6 6,6 24, 30 95 0 2 6 20 32 8 4 I-20-25 25 6 6,6 24, 30 04 0 2 6 20 32 8 4 Rod fork end Mod. G ISO 840 Mod. Ø CL ER CE B CM ØCK LE KK ØB G-8-0 8-0 8 5 6 4 4 8 M4x0,7 8 G-2-6 2-6 2 7 24 6 6 6 2 M6x 0 G-20 20 6 0 32 22 8 8 6 M8x,25 4 G-25-32 25 20 2 40 26 0 0 20 M0x,25 8 Swivel ball joint Mod. GA ISO 839 Mod. Ø Ø CN(H7) U EN ER AX CE KK ØT Z SW GA-8-0 8-0 5 6 8 9 0 27 M4x0.7 9 6.5º 9 GA-2-6 2-6 6 7 9 0 2 30 M6X 0 6.5º GA-20 20 8 9 2 2 6 36 M8X.25 2.5 6.5º 4 GA-32 25 0 0.5 4 4 20 43 M0X.25 5 6.5º 7
> Series 6, 24 and 25 mini-cylinders Piston rod socket joint Mod. GY ISO 839 Material: zama and zinc-plated steel. Mod. Ø Z E SW T Ø D Ø C Ø B Ø KK L3 SW L L CE AX L2 GY-2-6 2-6 5 6 0 3 20 0 M6X 8 2,2 55 28 5 5 GY-20 20 5 8 4 2,5 6 24 2 M8X,25 2 0 6 65 32 6 5 GY-32 25 5 0 7 5 9 28 4 M0X,25 5 9,5 74 35 8 6,5 Piston rod lock nut Mod. U ISO 4035 Mod. Ø SW m D U-8-0 8-0 7 3 M4X0,7 U-2-6 2-6 0 4 M6X U-20 20 3 5 M8X,25 U-25-32 25 7 6 M0X,25 Nose nut Mod.V ISO 4035 Mod. Ø D m SW V-8-0 8-0 M2X,25 5 9 V-2-6 2-6 M6X,5 6 24 V-20-25 20-25 M22X,5 0 32 Products designed for industrial applications. General terms and conditions for sale are available on www.camozzi.com. /.05.08
> Series 6, 24 and 25 mini-cylinders Self aligning rod Mod. GK Mod. Ø H I Z A Ø KK E L L3 L4 L B SW2 SW AX SW D Ø GK-20 20 9 7 4 8 M8x,25 2 57 2 5 26 4 3 7 6 2,5 GK-25-32 25-32 32 30 4 4 M0x,25 2 7,5 20 7,5 35 5 7 2 22 9 22 Coupling piece Mod. GKF Mod. Ø Ø D I Ø D2 A R SW B TF Ø D E L L KK GKF-20 20 5,5 - - 30 20 3 35 25 4,5 22,5 0 M8x,25 GKF-25-32 25 6,8 6,6 37 23 5 60 36 8 2 22,5 5 M0x,25 /.05.09 Products designed for industrial applications. General terms and conditions for sale are available on www.camozzi.com.