JS Series Sub-Miniature Slide Switches

Similar documents
8500 Series Subminiature Pushbutton Switches

EP Series Sealed Tiny Pushbutton Switches

(mω) 1. Temperature ( C) Voltage (V) ULRG1 /

EP Series Sealed Tiny Pushbutton Switches

EP Series Sealed Tiny Pushbutton Switches

MODULAR TELEPHONE JACKS

Two-Position Electric Duplex Room Thermostats

3/8" Square Multi-Turn Cermet Trimmer

Wirewound Resistors, Industrial Power, Vitreous Coated, Adjustable Tubular

DC CONTACTOR. hubbell industrial controls, inc. Hubbell Industrial Controls, Inc. Type Ampere 1500 Volt DC Contactor

C&K 8020 Series Snap-acting Momentary Pushbutton Switches

MAXIMUM. Mill-Max Spring-loaded Connectors Minimize Noise

8060 Series Alternate Action and Momentary Pushbutton Switches

Solenoid Pilot Operated Directional Control Valve

Pushbutton Product Selection Guide

Switch EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS 3PST EDG/EDS 4PST EDG/EDS DPDT

FINGER STRIPS. and other EMI shielding products. Characteristics

5000 series strike. Installation Instructions. ASSA ABLOY, the global leader in door opening solutions HES 2005

TP Series Tiny Pushbutton Switches

3/8" Square Multi-Turn Cermet Trimmer

C&K ET Series Sealed Subminiature Toggle Switches

F Series Pushbutton Switches

4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6

8020 Series Snap-acting Momentary Pushbutton Switches

Surface Mount Aluminum Electrolytic Capacitors

Wirewound Resistors, Industrial Power, Vitreous Coated, Adjustable Edgewound Tubular

8060 Series Alternate Action and Momentary Pushbutton Switches

CALL HEIGHT CARD READER TOP OF MONITOR FRONT SIDE CONCRETE SURFACE TO BE FLAT AND LEVEL IN AREA OF UNIT

C&K E Series Sealed Miniature Toggle Switches

Hot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see "Technical data")

Connectors according to DIN /IEC

Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve

4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:

9 ORDERING INFORMATION MTJ MTJ SERIES

C&K 8060 Series Alternate Action and Momentary Pushbutton Switches

HA series the slim connectors

LOADING ALIGNMENT TOOL GUIDE TOOL ASSEMBLY NOTE: 1 SCREWS SHOULD NOT PROTRUDE INTO INTERIOR.

Series 388/389 Custom Potentiometer Designer Guide

T80-R Miniature Rocker and Paddle Switches Compliant

有关敝公司产品的注意事项 IMDRF, IMDRF 用于陶瓷电容器与电感器以外的敝公司产品

Extended InGaAs Photodiodes IG26-Series

Accessories. Guard grilles, streamers 362. Wall rings 372. Connection lines 374. Accessories for Q-motors and energy-saving motors (ESM) 374

High Power Thin Film Chip Resistors

*See Part Number System for Details SPECIFICATIONS. Case Dimensions Type Case Size P 2 NFCC04

Adam Technologies, Inc.

TYPICAL SWITCH ORDERING EXAMPLE A2 G 40. Contact Materials & Ratings

34.00 NOTES: 1. THIS DRAWING IS TO BE USED IN CONJUNCTION WITH # ALTERATIONS TO THE BASE, PLATES, AND HOLDERS CAN BE MADE AS NEEDED.

RPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.

NPI Power Inductors. NPI W Series

4/2- and 4/3-way shut-off valve

Surface Mount Aluminum Electrolytic Capacitors

3-Way Ball Valve Assemblies Using TAC DuraDrive Actuators

Dip and coded rotary switches

FILTER D-SUB. connectors

RPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007

Linear measuring technology

T Series Subminiature Toggle Switches

9 ORDERING INFORMATION MTJ MTJ SERIES

Boiler room components 0861EN April 2017 Distribution and regulation units

TYPICAL SWITCH ORDERING EXAMPLE TERMINALS

Accessories. Guard grille, streamers 238. Wall rings 248. Connection leads 250. Accessories for ESM and Q-motor 250

3/2 and 4/2-way Directional Poppet Valves with Solenoid Operation Model M-SED 6, Series 1X. Size 6 (350 bar) H/A 4243/94

Card Edge GENERAL SPECIFICATIONS

JUMO MIDAS S05 OEM pressure transmitter - universal

ELECTRICAL SYSTEM 4 D INSTRUMENTATION

LOW VOLTAGE AIR SWITCH

Solenoid Pilot Operated Directional Control Valve

HSB series the heavy-duty connectors

AWWA Grooved Fittings

AC INLETS & OUTLETS IEC 320 & MINI IEC CONNECTORS IEC SERIES

MISCELLANEOUS INDEX PAGE DATE SERIES DESCRIPTION

Make-Before-Break design available in both V- and T-blade switch types. ATTRIBUTES

TWF SERIES. PLASTIC ENCLOSURE with WALL MOUNTING FLANGE. Accessories (Optional parts)

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03

Control stations and enclosures

Precision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.

TA25DU0.4 Overload Relay a. Features. Descriptions

PROPORTIONAL DIRECTIONAL CONTROL VALVES PILOT OPERATED WITHOUT LVDT TYPICAL PERFORMANCE SPECIFICATIONS W/O LVDT, OPEN INNER LOOP MOUNTING SURFACE

VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents

Vishay Dale Inductors

PILOT OPERATED PRESSURE RELIEF VALVE SERIES - IN-LINE MOUNTING

SMT T SERIES SURFACE MOUNT TINY SWITCHES Distinctive features

RS4S-P86Z* SERIES PTO

The ASPIAIG-F series of molded smd power inductors come in a variety of package sizes. The series supports current handling up TOLERANCE M: ±20%

1 SGI 500XT INVERTER TRANSFORMER WITH OUTDOOR ENCLOSURE CONDUIT, FITTINGS AND CONDUCTORS AS REQUIRED

TS1.5 Flat Base Pole Spacing 8mm (.315) Mounting Hole Diameter 2.8mm (.110) Stripping Length 5mm (.197)

151

MOUNTING HOLES: 4X DIA 0.20 INCH 7.6 X 6.4 INCH PATTERN 42.50

Hazardous Location Push Button Specifications

TITAN DIFFERENTIAL PRESSURE DPF266 ATEX/IECEx Exd, Exia & INDUSTRIAL DIFFERENTIAL PRESSURE, SWITCH

Thermocouple & RTD Accessories (Thermowells, Connectors & Fittings)

SINEAX C 402 Alarm unit

2/2 Solenoid Operated Seat Valve, ISO Size 03

Control stations and enclosures Control station enclosures : insulated, metal and flush mounting

TFM 1600 Seat Body Material: Stainless. PTFE Seat Body Material: Stainless and Brass. Catalog No. V81-5 Sept. 2008

Wirewound Resistors, Industrial Power, Tubular, Ribwound (RB), Fixed (RBEF, RBSF)

Cable Trolleys for C-Rails Program

Incremental encoders Solid shaft with square flange pulses per revolution


JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks

Transcription:

Su-Miniture Switches Fetures/enefits Positive detent Low profile IR reflow to 60º solder profile Surfce nd thru hole mounting, DPDT, DPT models RoHS complint Typicl pplictions Telecommuniction products omputer peripherls Thermostt select switch Instrumenttions Specifictions ONTT RTING: See individul series for informtion. ELETRIL LIFE: See individul series for informtion. ONTT RESISTNE: 70 m Ω mx. INSULTION RESISTNE: 100 m Ω min. @ 500V. DIELETRI STRENGTH: 500 V min. @ se level. OPERTING TEMPERTURE: -10º to +60º STORGE TEMPERTURE: -0º to +85º NOTE: Specifictions nd mterils listed ove re for switches with stndrd options. For informtion on specific nd custom switches, consult ustomer Service enter. Mterils HOUSING: 4/6 nylon (UL94V-), lck. TUTOR: 4/6 nylon (UL94V-), lck. ONTTS: opper lloy, silver plted. TERMINLS: rss, silver plted RIGHT NGLE, P THRU-HOLE ONTT RTING: 6 VD @ 0. ELETRIL LIFE: 5,000 mke-nd-rek cycles. 0.54 &K 0.10 (,) P MOUNT - HOLE LYOUT 6X 0.05 (6X 0,9) Prt Numer S0011QN DPDT Shown in position 1 TRVEL TERMINL No. 1 0.040 (1,0) 0.014 (0,5) 0.56 (6,5) 0.10±.016 (,±0,4) IRUIT DIGRM : OMMON PIN 49 Dimensions re shown: Inch (mm) Specifictions nd dimensions suject to chnge

Su-Miniture Switches RIGHT NGLE, P THRU-HOLE ONTT RTING: 6 VD @ 0. ELETRIL LIFE: 5,000 mke-nd-rek cycles. 0.51 (1,0) &K 0.10 (,) 8X 0.05 (8X 0,9) P MOUNT - HOLE LYOUT Prt Numer S0011QN DPT Shown in position 1 c TRVEL TERMINL No. 1 0.457 (11,6) (,0) 0.10±.016 (,±0,4) 7á IRUIT DIGRM : OMMON PIN 8á P THRU-HOLE ONTT RTING: 6 VD @ 0. ELETRIL LIFE: 5,000 mke-nd-rek cycles. 0.51 (1,0) c &K TRVEL 0.14 +.01 (,6+0,/-0,0) 0.10 (,) 8X 0.05 (8X 0,9) P MOUNT - HOLE LYOUT Prt Numer S0011QN DPT Shown in position 1 (,0) TERMINL No. 1 0.488 (1,4) 0.10±.016 (,±0,4) 7á IRUIT DIGRM : OMMON PIN 8á 50 Dimensions re shown: Inch (mm) Specifictions nd dimensions suject to chnge

Su-Miniture Switches P THRU-HOLE ONTT RTING: 6 VD @ 0. ELETRIL LIFE: 5,000 mke-nd-rek cycles. 0.54 &K 0.10 (,) P MOUNT - HOLE LYOUT 6X 0.05 (6X 0,9) Prt Numer S0011QN DPDT TRVEL Shown in position 1 TERMINL No. 1 0.040 (1,0) 0.014 (0,5) 0.56 (6,5) 0.10±.016 (,±0,4) IRUIT DIGRM : OMMON PIN SURFE MOUNT ONTT RTING: 6 VD @ 0. ELETRIL LIFE: 5,000 mke-nd-rek cycles. 0.54 &K 0.047 (1,) (,0) 0.15 (8,0) Prt numer S0011SQN DPDT Shown in position 1 TERMINL No. 1 TRVEL P MOUNT - TOLERNE ±.00(0,05) ville in tpe & reel only, see pge -54 (,0) (0,) IRUIT DIGRM : OMMON PIN 0.95 (7,5) 51 Dimensions re shown: Inch (mm) Specifictions nd dimensions suject to chnge

Su-Miniture Switches RIGHT NGLE SURFE MOUNT ONTT RTING: 6 VD @ 0. ELETRIL LIFE: 5,000 mke-nd-rek cycles. TERMINL No. 1 &K 0.047 (1,) 0.099 (0) Prt Numer S10011SQN 0.54 MX 0.67 (6,8) P MOUNT - HOLE LYOUT X 0.05 (X 0,9) Shown in position 1 ville in tpe & reel only, see pge -54 TRVEL 0.01 (0,8) 0.67 (6,8) 0.01 +.000 -.004 (0,8+0/-0,1) 0.148 (,75) (0,) IRUIT DIGRM : OMMON PIN ONTT RTING: 6 VD @ 0. ONTT RTING: 0 VD @ 0.1 ELETRIL LIFE: 5,000 mke-nd-rek cycles. ELETRIL LIFE: 15,000 mke-nd-rek cycles. () 8,5 [.5] () X ø 0,8 [.01], [.16] &K,5 [.18] () 1,5 ± 0,1 [.059 ±.004 ] TRVEL () 45 X 0,[.008] HMFER P LYOUT REOMMENDED 1,5 ± 0,1 [.059 ±.004 ] Prt Numer S10011QN Shown in position 1,5 [.18] [.118] 1 TERMINL NO. 1 X 0,5 [.00], [.16] X 0, [.01] SHEMTI 5 Dimensions re shown: Inch (mm) Specifictions nd dimensions suject to chnge

Su-Miniture Switches ONTT RTING: 6 VD @ 0. ONTT RTING: 0 VD @ 0.1 8,5 [.5] ELETRIL LIFE: 5,000 mke-nd-rek cycles. ELETRIL LIFE: 15,000 mke-nd-rek cycles. 1 [.09] () &K,5 [.18] [.118] 8,00 [.15] Prt Numer S10011SQN () Shown in position 1 Terminl No. 1 0,5 [.00] P LYOUT REOMMENDED ville in tpe & reel only, see pge -54 SQ 1,5 ± 0,1 [.059 ±.004 ] TRVEL 45 X 0,[.008] X HMFER 1,5 [.18] 0,0 [.01] [.118] 7,5 [.95] SHEMTI RIGHT NGLE SURFE MOUNT LOW PROFILE.08±.004 (0.7±0.1) HIGH 0.005 (0,1) 0.16 (,) 0.059 (1,5) 0.05±0.00 (1,±0,05) 0.059±0.004 TRVEL (1,5±0,1) 0.07 (7,8) 0.177 (4,5) 1 x0.016 (0,4) Specifictions ONTT RTING: 5 VD @ 1M ELETRIL LIFE: 10,000 cycles. ONTT RESISTNE: <100 m ohms (initil) <00 m ohms (fter processing). INSULTION RESISTNE: 100 m ohms @500 VD. DIELETRI STRENGTH: 50 V. OPERTING TEMPERTURE: -0º to +70º 0.07 (1,8) 1 SHEMTI Prt Numer S10000SQN ville in tpe & reel only, see pge -54 0.09 0.08 (5,) 0.146 (,7) ±0.00 (4±0,05) 0.56 (6,5) 0.01 (0,8) REOMMENDED P MOUNTING 0.090 0.059 (,) (1,5) 0.007 (0,18) x0.05-0 (0,9 +0,1) -0 0.08±0.004 (0,7±0,1) 0.64 (6,7) ±0.004 (4±0,1) 0.008x450 x HMFER 0.00±0.004 (0,5±0,1) 0.00±0.00 (0,75±0,05) 0.00 (0,05) 0.007 (0,18) 0.016 (0,4) 0.01 +.0-0.004 (0,8 +0 ) -0,1 5 Dimensions re shown: Inch (mm) Specifictions nd dimensions suject to chnge

Su-Miniture Switches TPE ND REEL FOR PRT NUMER S1011SQN Quntity per reel 1000 Ø0.059 (Ø1,5+0,1/-0) () (4) 0.069 (1,75) 0.015±.00 (0,4±0,05) 0.19 (4+0, 1/-000) 0.60±.008 (16±0,) 0.58 (9,1) 0.95 (7,5) 0.1 (,1) 0.47 0.9 (8,6) 0.067 (1,7) 0.047 (1,) TPE ND REEL FOR PRT NUMER S10000SQN Quntity per reel 4000.079 [ ].157 ±.004 [ 4 ± 0,1 ] ø.059 +0,1 1,5 [ -0,0 ].069 [ 1,75 ].016 [ 0,4 ] TPE ND REEL FOR PRT NUMER S10011SQN Quntity per reel 1000 4 ± 0,1 [.157±.004] +0,1 ø1,5 0.059 [ ].60 ±.008 [ 16 ± 0, ].0 [ 8,4 ] 1,75 [.069] 4±0, [.945±.008] &K &K 11,75 [.46].15 ±.004 [ 8 ± 0,1 ].95 [ 7,5 ].098 [ ] 5,7 [.4] 1 [.47].17 [ 5,5 ] TPE ND REEL FOR PRT NUMER S0011SQN 8 [.15] - SETION 4 [.157] Quntity per reel 1000.079 [ ].157 [ 4 ] ø.059 +0,1 1,5 [ -0,0 ].069 [ 1,75 ].016 [ 0,41 ].945 ±.008 [ 4 ± 0, ].4 [ 11 ].45 [ 11,5 ].47 [ 1 ].4 [ 5,7 ].15 [ 8 ] 54 Dimensions re shown: Inch (mm) Specifictions nd dimensions suject to chnge