AWWA Grooved Fittings
|
|
- Christina Riley
- 5 years ago
- Views:
Transcription
1 WW Grooved Produts WW Grooved Fittings MTERI SPECIFICTIONS Mteril - Dutile Iron per STM 53 Grde Interior lining - Cement lined per NSI/WW C104/21.4 sizes 3 single thikness nd sizes 4-3 doule thikness nd sphlti sel oted. Exterior oting Rust inhiitor prime ot. Fittings supplied with rigid rdius grooves in ordne with NSI/WW C0. Fittings onform to NSI/WW C110/21.10 for enter-to-end dimensions. Wll thikness per NSI/WW C153/21.53 or NSI/WW C110/ Fittings rted to 350 psi for sizes 3"-12", 250 psi for sizes 14"-24" nd 150 psi for sizes 30"-3". Sizes 3"-12" U, UC listed nd Ftory Mutul pproved. The Stndrd sphlti sel ot pplied on ement lining is U/NSI/NSF Stndrds 1 nd 372 pproved. Optionl linings nd otings re ville. ll fittings re U/NSI/NSF Stndrds 1 nd 372 pproved. PPROVED T E-C 90º.R. EOW E-1C 90º EOW E-2C 45º EOW E-3C E-4C 22 1/2º EOW 11 1/4º EOW K-1C CP CTU PPROX. PPROX. PPROX. PPROX. PPROX. T MX. OWE TP PPROX *ll dimensions in lk text re in inhes exept where indited. *ll dimensions in lue text (elow numer) re in millimeters exept where indited. GRVDCT REGISTERED TRDEMRK OF STR PRODUCTS / Pge 11 STR PRODUCTS OUSTON CORPORTE TO FREE FX
2 WW Grooved Produts WW Grooved Fittings T-1C TEE -1C TRUE WE X-1C CROSS -1C 45º TER CTU PPROX. PPROX. PPROX. PPROX T-1C TEE PPROX. 4 X 4 X 100 X 100 X 150 X X X 150 X X 8 X X 200 X X 10 X X 250 X *ll dimensions in lk text re in inhes exept where indited. *ll dimensions in lue text (elow numer) re in millimeters exept where indited. REGISTERED TRDEMRK OF STR PRODUCTS GRVDCT STR PRODUCTS OUSTON CORPORTE TO FREE FX Pge 12
3 WW Grooved Produts WW Grooved Fittings T-2C REDUCING TEE + Contt Str Pipe Produts for Detils *ll dimensions in lk text re in inhes exept where indited. PPROX. -2C 45º REDUCING TER PPROX. X-2C REDUCING CROSS PPROX. 4 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X *ll dimensions in lue text (elow numer) re in millimeters exept where indited. (Con t) GRVDCT REGISTERED TRDEMRK OF STR PRODUCTS Pge 13 STR PRODUCTS OUSTON CORPORTE TO FREE FX
4 WW Grooved Produts WW Grooved Fittings REGISTERED TRDEMRK OF STR PRODUCTS T-2C REDUCING TEE PPROX. -2C 45º REDUCING TER PPROX. X-2C REDUCING CROSS PPROX. 20 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Contt Str Pipe Produts for Detils *ll dimensions in lk text re in inhes exept where indited. *ll dimensions in lue text (elow numer) re in millimeters exept where indited. GRVDCT STR PRODUCTS OUSTON CORPORTE TO FREE FX Pge 14
5 WW Grooved Produts WW Grooved Fittings R-1C CONC. REDUCER R-2C ECC. REDUCER E-5C 90º RED. E E-7C 90º.R. RED. E GRVDCT PPROX. PPROX. PPROX. PPROX. 4 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Contt Str Pipe Produts for Detils *ll dimensions in lk text re in inhes exept where indited. *ll dimensions in lue text (elow numer) re in millimeters exept where indited. (Con t) REGISTERED TRDEMRK OF STR PRODUCTS Pge 15 STR PRODUCTS OUSTON CORPORTE TO FREE FX
6 WW Grooved Produts WW Grooved Fittings R-1C CONC. REDUCER R-2C ECC. REDUCER E-5C 90º RED. E E-7C 90º.R. RED. E PPROX. PPROX. PPROX. PPROX. 20 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Contt Str Pipe Produts for Detils *ll dimensions in lk text re in inhes exept where indited. REGISTERED TRDEMRK OF STR PRODUCTS STR PRODUCTS OUSTON CORPORTE TO FREE FX *ll dimensions in lue text (elow numer) re in millimeters exept where indited. Pge 1 GRVDCT.18.01
7 WW Grooved Produts WW Grooved Fittings E-8C 90º FRE E-9C 90º ONG RDIUS FRE S-1C STRIGT FRE E-10C** 90º SIDE OUTET T-3C** TEE SIDE OUTET CTU PPROX. PPROX. PPROX. PPROX. PPROX Contt Str Pipe Produts for Detils *ll dimensions in lk text re in inhes exept where indited. *ll dimensions in lue text (elow numer) re in millimeters exept where indited. **Reduing side outlet 90 elows, tees nd rosses re ville. Contt Str Pipe Produts for detils. GRVDCT REGISTERED TRDEMRK OF STR PRODUCTS Pge 17 STR PRODUCTS OUSTON CORPORTE TO FREE FX
8 WW Grooved Produts WW Grooved Fittings U R R R U U U R T S T S T S T S E-11C 90 SE EOW T-4C SE TEE E-12C 90 ONG RDIUS SE EOW T-5C REDUCING SE TEE SE DIMENSIONS PPROX. CTU R S T U W Ø NO. OF OTS E-11C SE EOW T-4C SE TEE E-12C R SE EOW T-5C REDUCING SE TEE NOTES: 1. ses of these fittings re intended for support in ompression nd re not to e used for nhors or supports in tension or sher. 2. ses re fed nd drilled. Dimension R is finished dimension. Ø w 3. ses 3-24 meet the dimensions of SME 1.1 nd S + Contt Str Pipe Produts for Detils *ll dimensions in lk text re in inhes exept where indited. REGISTERED TRDEMRK OF STR PRODUCTS STR PRODUCTS OUSTON CORPORTE TO FREE FX *ll dimensions in lue text (elow numer) re in millimeters exept where indited. Pge 18 ROUND SE GRVDCT.18.01
9 WW Grooved Produts Reduing Fitting Outlet Designtion METOD OF DESIGNTING OUTETS OF REDUCING FITTINGS FOR SPECIFICTIONS Reduing Tees Reduing on Outlet Reduing on One Run Reduing on One Run nd Outlet Reduing on oth Runs (ull ed) Reduing Crosses d d d d Reduing on One Outlet Reduing on oth Outlets Reduing on One Run nd Outlet Reduing on One Run nd oth Outlets Reduing terls Reduing on rnh Reduing on One Run Reduing on One Run nd rnh True Side Outlet Tee Doule rnh Elow Side Outlet 90 deg. Elow d d Right nd eft nd Right nd eft nd The rgest opening estlishes the si size of reduing fitting. The lrgest opening is nmed first, exept for ull hed tees whih re reduing on oth runs nd doule rnh elows where oth rnhes re reduing; the outlet is the lrgest opening nd nmed lst in oth ses. In designting the openings of reduing fittings, they should e red in the order indited y the sequene of the letters,,, nd d. In designting the outlets of side outlet reduing fittings, the side outlet is nmed lst; nd in the se of the side outlet ross, whih is not shown, the side outlet is designted y the letter e. GRVDCT REGISTERED TRDEMRK OF STR PRODUCTS Pge 19 STR PRODUCTS OUSTON CORPORTE TO FREE FX
10 WW Grooved Produts Tp otions METOD OF DESIGNTING OCTION OF TPPED OES The ove illustrtions show two views of the sme fitting nd represent fittings with symmetril shpes, with the exeption of the side outlet elow nd the side outlet tee (stright sizes). If fitting wll thikness is insuffiient for the required tp size or ngle of tp, oss will e required. REGISTERED TRDEMRK OF STR PRODUCTS GRVDCT STR PRODUCTS OUSTON CORPORTE TO FREE FX Pge 20
11 WW Grooved Produts Pipe Preprtions D T O.D. C R DUCTIE IRON PRESSURE CUT GROOVING SPECIFICTIONS FOR FEXIE ND RIGID OINTS OUTSIDE DI. TO. GSKET SE GROOVE WIDT /-0.01 CTU O.D. FEXIE OINT +.01/-.047 RIGID OINT +.000/-.020 GROOVE DI. C GROOVE DEPT D CTU TO. MIN. MX / / / / / / / / / / / / / / / / / / / / / / / / / / RDIUS R MIN. W TICKNESS T NOTES: 1. When rigid rdius groove is used, the pipe or fitting ends re drwn together in ontt s the oupling is tightened wheres when flexile rdius groove is used it llows for moderte onditions of pipe movement or defletion due to therml, seismi or settling tivities. 2. Gsket set must e free from sores, sems, loose pint, sle, dirt, grese nd rust to ssure lek tight sel. 3. Pipe end squreness (ends must e squre ut) mximum llowle tolerne from squre ut ends is 0.030" for 3" size, 0.045" for sizes 4" nd ", 0.00" for sizes 8" through 3". 4. Groove dimeter must hve uniform depth for entire irumferene. 5. Pipe out of roundness - differene etween mximum O.D. nd minimum O.D. mesured t 90 must not exeed totl O.D. tolerne listed. GRVDCT REGISTERED TRDEMRK OF STR PRODUCTS Pge 21 STR PRODUCTS OUSTON CORPORTE TO FREE FX
12 WW Grooved Produts Smple Speifitions STR PRODUCTS - SMPE SPECIFICTIONS Grooved Piping System for WW Dutile Pipe Mehnil grooved pipe ouplings nd fittings s mnuftured y Str Pipe Produts or equl shll e used on ll dutile iron piping systems. Grooved end produt mnufturer to e ISO-9001:2008 ertified. Pipe Mterils Grooved end dutile iron pipe shll e grooved in ordne with NSI/WW Stndrd C-0. Rigid rdius groove dimensions shll e utilized where flexiility is neither required nor desired. Flexile grooves shll e provided s neessry for settlement or expnsion s determined nd pproved y the engineer. Mehnil Couplings Mehnil ouplings shll e Str C-9 st of dutile iron onforming to STM -53, grde , with rust resistnt primer oting (unless speified otherwise) with Flush syntheti ruer gsket nd plted nuts nd olts, 3" - 3" size rnge. Couplings olts/nuts olts shll e het-treted plted ron steel, trk-hed meeting the physil nd hemil requirements of STM -449 nd physil requirements of STM -183, or optionl hex hed olts nd nuts shll e Type 31 stinless steel onforming to STM -193, Grde -8M, Clss 2. C-9Gskets Gskets shll e flush design molded of syntheti ruer to onform to dutile pipe surfes with short enter leg whih shll ridge the pipe ends offering n initil sel on the leding edge of the pipe ends. Elstomers shll hve properties s designted in STM D Referene shll lwys e mde to the ltest pulished Seletion Guide for Str gskets for proper gsket seletion for the intended servie. Wter Servie/Dutile Iron Pipe Gsket supplied for wter servie from -20 F to +200 F on dutile iron pipe shll e Grde M hlogented utyl, with rown olor ode, speilly ompounded to onform to dutile pipe surfes reommended for wter servie within the speified temperture rnge plus vriety of diluted ids, oil-free ir, nd mny hemil servies (not reommended for petroleum servies). Gsket supplied for wter servie from -20 F to +200 F for the Str F-4 flnge dpter shll e Grde M hlogented utyl. Oil Servie/Dutile Iron Pipe Gsket supplied from -20 F to +180 F on dutile iron pipe shll e Grde S nitrile, with red olor ode, ompounded to onform to dutile pipe surfes reommended for petroleum produts, ir with oil vpors, vegetle nd minerl oils within the speified temperture rnge, exept hot dry ir over + F nd wter over +150 F. Not reommended for hot wter servies. Fittings Fittings shll e dutile iron onforming to STM -53, grde nd onform to the requirements of NSI/WW-C110/21.10 for enter to end dimensions nd NSI/WW-C110/21.10 or NSI/WW C153/21.53 for wll thikness. End preprtion re per NSI/WW-C0 rigid rdius grooving. Grooved/Flnged Trnsition Components Str F-4 flnge dpter shll e used for onneting grooved fittings to flnged vlves, pumps, pipe, fittings, nd other Clss 125 flnged omponents. The flnge dpters shll e dutile iron onforming to STM -53, grde , 3" - 24" size rnge. Gskets shll hve properties s designted y STM D-2000 of the sme ompounded elstomer s the ouplings, nd shll e suitle for the required servie. th olts & nuts shll e sme s for the ouplings. GRVDCT REGISTERED TRDEMRK OF STR PRODUCTS Pge 22 STR PRODUCTS OUSTON CORPORTE TO FREE FX
AWWA Grooved Fittings
WW Grooved Sumittl Form WW Grooved Fittings SUMITT INFORMTION PROECT NME: ENGINEER: CONTRCTOR: WW Grooved Fitting SPEC. SECTION: MEMER FETURES & DVNTGES Fittings supplied with rigid rdius grooves in ordne
More informationPIPE SUPPORTS IRANIAN PETROLEUM STANDARDS COVER SHEET B A REV. DRAWING No. DATE DATE IPS-D-AR-012 DESCRIPTION
SUPPORTS DESRIPTION IRNIN PETROLEUM STNDRDS NO REVISION PERMITTED UNLESS PPROVED Y STNDRD ORGNIZTION OVER SHEET DRWING No. IPS-D-R-0 SHT ONRETE JOISTS STEEL JOISTS WOOD JOISTS NOTE: STRUTURL STEEL EM SEE
More informationAWWA GROOVED PRODUCTS GRVDCAT.18.01
WW GROOVED PRODUCTS Str Pipe Produts 4018 Westhollow Pkwy. ouston, TX 77082 Toll-Free: (800) 999-3009 Tel: (281) 558-3000 Fx: (281) 558-9000 CMBRIDGE CLL CENTER Cll Centers 1144 Industril Rod Cmridge,
More informationHOOK UP LAYOUT FOR HEAT GENERATION AND FUEL TANK SYSTEM
HOOK UP LYOUT FOR HET GENERTION ND FUEL TNK SYSTEM DESRIPTION IRNIN PETROLEUM STNDRDS NO REVISION PERMITTED UNLESS PPROVED Y STNDRD ORGNIZTION OVER SHEET DRWING No. IPS-D-R-018 SHT 1 "(DN0) FILL FUEL OIL
More informationultra high purity tubing and fittings dimensional specifications
ultr high purity tuing nd fittings dimensionl speifitions Contents Pge prt desription system 1 tuing/oxil speifitions 2 90 elow (2WW) 3 45 elow (3WW) 4 reduing tee (7RWWW) 5-6 onentri reduer (31WW) 7 equl
More informationM J G O.D. B.C. A B I.D. C O.D. A B C I.D. B.C.
DI S TR Utility Pipe ittings and ccessories MJ ccessories NSI/WW 111/21.11 GLNDS, GSKETS, OLTS & NUTS GENERL SPEIITION MTERIL: PRESSURE: TESTING: DIMENSIONS: WEIGHTS: OTING: Ductile Iron per STM 536 350
More informationLifeTec PT N PROCESS FILTRATION FROM PURE TO STERILE MAIN FEATURES & BENEFITS PRODUCT DESCRIPTION INDUSTRIES
FROM PURE TO STERILE MAIN FEATURES & BENEFITS Exellent mteril resistne towrds ggressive medi Inherently hydrophoi PTFE memrne Sterile grde t 0.2 µm (HIMA/ASTM) High flow rtes Biologilly inert Approved
More informationHARCO DUCTILE IRON IPS GASKETED FITTINGS DESIGN DATA
HRCO DUCTIE IRON IPS GSKETED FITTINGS DESIGN DT pplicable Standards Ductile Iron: STM 536 Grade 65-45 -12, 80-55 - 06 Joints: STM D-3139; WW C153 Gaskets: SR Standard, EPDM & Nitrile vailable STM F-477
More informationSummary 0163EN. Chapter 5 - Couplings A70 Double Jacket Brass Coupling A70 Single Jacket Brass Coupling 37 A71 Forestry Coupling 37
pril 2008 0163EN Summry Fire protetion produts hpter 1 - Hose, Sprinkler Vlves nd essories 53 Gte Vlve 300 l. Rted 4 53G Single Hydrnt Gte Vlve 4 50 ngle Hose Vlve with Hydroltor 5 51 ngle Hose Vlve with
More informationABS PIPES & FITTINGS THE INDUSTRY STANDARD FOR A WIDE RANGE OF APPLICATIONS
S PIPES & FITTINGS THE INDUSTRY STNDRD FOR WE RNGE OF PPLICTIONS VUX VERSION 2 S PIPE & FITTINGS FOR INDUSTRIL PPLICTIONS INTRODUCTION S thermoplastics are recognized as a suitable material to be used
More information864293A02 4.3L (262 CID) MANIFOLD CONVERSION
864293A02 4.3L (262 CID) MANIFOLD CONVERSION Models Covered Notie Prts List Additionl Prts Needed Models Covered Seril Numer Or Yer 4.3L (262 CID) Single Piee Mnifolds 0F803800 nd Aove NOTICE After ompleting
More informationBrazed heat exchanger XB
Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the
More informationConnectors according to DIN /IEC
Connetors ording to DIN 41612 /IEC 60603-2 26 ept GmH I Tel. +49 (0) 88 61/25 01 0 I Fx +49 (0) 88 61/55 07 I E-Mil sles@ept.de I www.ept.de Contents Introdution 28 Overview 30 The Stndrd 32 Derting Digrms
More informationBRITISH STANDARD THREADS ALL MEASUREMENTS IN MM DEPTH OF THREADS IMPERIAL METRIC A P H B E
Fittings GLVNISED MLLELE IRON PIPE FITTINGS Specifications STNDRD ND IDENTIFITION: Standard for production and use EN 10242 : 1994. Fittings made of high quality blackheart malleable cast iron to STM -197,
More informationNIC Nano 0.85 CTO-Balloons For your most challenging cases
Whtever we lim to hve only your own experiene with our produts will onvine you. NIC Nno 0.85 CTO-Blloons For your most hllenging ses Aville in RX nd OTW version OTW version with 160 m usle length High
More informationAccessories. Guard grille, streamers 238. Wall rings 248. Connection leads 250. Accessories for ESM and Q-motor 250
Generl informtion Gurd grille, stremers 238 Wll rings 248 Connetion leds 250 Aessories for nd 250 Terminl ox, motor protetion swith, speed setting, str-delt swith, repir swith, pitors 256 237 Contts Tehnology
More informationALUMINUM ENTRANCE DOORS
DOORS REVISION SHEET DESRIPTION 1 - GENERL NOTES & GLZING DETIL 2 - ELEVTIONS, NHOR LYOUT & ONFIGURTIONS 3 ELEVTIONS, NHOR LYOUT & ONFIGURTIONS - - VERTIL DETILS - HED & SILL OPTIONS 2. DEQUY OF THE EXISTING
More informationDirectional Control Valves. General Description. Features. Specifications
echnicl Informtion Generl Description directionl control vlves re high performnce, 5-chmer, direct operted, wet rmture, solenoid controlled, 3 or 4-wy vlves. hey re ville in 2 or 3-position nd conform
More information3/8" Square Multi-Turn Cermet Trimmer
www.vishy.om 3/8" Squre Multi-Turn Cermet Trimmer Vishy Sfernie FEATURES Industril grde W t 70 C Tests ording to CECC 41000 or IEC 60393-1 The is smll size trimmer - 3/8" x 3/8" x 3/16" - nswering PC ord
More informationClassic 9. Sliding Door Systems, C-Profile
Clssi 9 Sliding oor Systems, C-Profile Tle of Contents Clssi 9 - Tue rive Systems, C-Profile Trks, Joint Brkets Hngers Srew-on Pltes Fixing Brkets Side Fixing Brkets Trk Stoppers U-Trks nd Guide Rollers
More informationLifeTec PP N PROCESS FILTRATION FROM PURE TO STERILE MAIN FEATURES & BENEFITS PRODUCT DESCRIPTION INDUSTRIES
FROM PURE TO STERILE MAIN FEATURES & BENEFITS Extremely durle Polypropylene onstrution Outstnding flow rte Extremely high dirt holding pity Asymmetril filter mtrix for longer servie life Approved for Food
More informationFUEL SYSTEM. Section 3A Pulse Crankcase Driven Fuel Pump. Model 200/225 DFI. 1. Fuel Pressure/Vacuum Gauge (0-15 psi) (Obtain Locally)
FUEL SYSTEM Section 3A Pulse Crnkcse Driven Fuel Pump Tle of Contents Specifictions................................ 3A-1 Specil Tools................................ 3A-1 Fuel Pump..................................
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted
More informationControl stations and enclosures Control station enclosures : insulated, metal and flush mounting
Chrcteristics Control sttions nd enclosures Control sttion enclosures : insulted, metl nd Insulted enclosures XAP-A Mteril nd colour Glss-reinforced polyester, coloured grey throughout Approvls Specil
More informationHFKN. The SMW-AUTOBLOK. Technology at the highest level:
Tehnology t the highest level: The SMWAUTOBOK FK Esy lurition even on vertil mhines with 3 rdil uiltin grese nipples. rge through hole for full use of spindle ore. igh effiieny of the wedge r drive ensures
More informationSTAINLESS STEEL FITTINGS
nvilpress Stainless Steel Fittings provide a complete line of mechanically joined press-fittings in sizes 1 /2 through 2 inches. These fittings are designed to work with Schedule 5 or 10 Stainless Steel
More informationCLAMP-CLOSED PIPE-STL BLK 1/2" (540) CLAMP-GROUNDING,PIPE CLAMP-CLOSED CLAMP-CLOSED
PIPE-STL LK /" 006-0-000 (700) 5598-0-0 SREW 000G-0- ELOW-STL, 90 DEG 0055-0-000 PIPE-STL LK /" 006-0-000 (50) ELOW-RSS-90,/FX/FPT 0070-0-000 LMP-GROUNDING,PIPE 0758-0-000 PIPE-STL LK /" 006-0-000 (805)
More informationFIBERGLASS ROUND CONTROL DAMPERS. Model K-RD INTRODUCTION M.K. PLASTICS PROVIDES FOUR DAMPER MODELS K-RD SUGGESTED SPECIFICATION
FIERGLSS ROUND CONTROL S INTRODUCTION The M.K. Plastics series K-RD are manufactured to meet the needs of the odor control and corrosive HVC industries by providing a corrosion-resistant FRP Damper that
More informationLinear measuring technology
Mesuring length mx 125 m Trverse speed mx 10 m/s The drw wire mehnis 50 ost oth ompt design nd high dynmis The drw wire mehnis my e equipped with enoders with n nlog, inrementl or solute put The mximum
More informationHEATING BLANKETS FOR GENERAL COMPOSITE REPAIR
Innovtion in Technology for Aircrft Mintennce Equipment, Airline Support through Engineering & Trining Advnced Composite & Metllic Structures Cge Code - NATO Code : F7856 - Eur VAT- ID: FR90 328961073
More informationControl stations and enclosures
Chrcteristics Control sttions nd enclosures Control sttion enclosures: insulted, metl nd Insulted enclosures XAP-A Mteril nd colour Glss-reinforced polyester, coloured grey throughout Approvls Specil version:
More information4/2- and 4/3-way shut-off valve
Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure
More information3/8" Square Multi-Turn Cermet Trimmer
www.vishy.om 3/8" Squre Multi-Turn Cermet Trimmer Vishy Sfernie FEATURES Industril grde W t 70 C Tests ording to CECC 41000 or IEC 60393-1 The is smll size trimmer - 3/8" x 3/8" x 3/16" - nswering PC ord
More informationTable of Contents. How to Select a Winch
Table of ontents Table of contents and limited warranty excerpt... Performance data table... HD-P 8, Series winches and HD-P, Series winches...- RPH, Series winches and RPH, Series winches...6-7 RPH, Series
More informationPOWER TRIM. Table of Contents. Section 5B - Trim Cylinders
SERVICE MANUAL NUMBER 14 Tle of Contents POWER TRIM Setion 5B - Trim Cylinders TRIM CYLINDERS Speifitions....................... 5B-2 Torque Speifitions............. 5B-2 Speil Tools.....................
More informationJET PUMP R1 JUNE 1996 JET PUMP
JET PUMP 5 90-831996R1 JUNE 1996 JET PUMP 5-1 Tle Of Contents Pge Generl Informtion....................... 5-1 Priniples of Opertion................. 5-1 Speil Tools.......................... 5-2 Serviing
More informationJS Series Sub-Miniature Slide Switches
Su-Miniture Switches Fetures/enefits Positive detent Low profile IR reflow to 60º solder profile Surfce nd thru hole mounting, DPDT, DPT models RoHS complint Typicl pplictions Telecommuniction products
More informationEOI No: DATED 26/04/2015 EXPRESSION OF INTEREST FOR SUPPLY OF BIO-DIESEL NOTICE INVITING EOI
NOTICE INVITING EOI Der Sir/Mdm, SUBJECT: EXPRESSION OF INTEREST (EOI) FOR SUPPLY OF BIO-DIESEL. (EOI No. 1000131962 dt 26/04/2015 due on 19/05/2015 t 1500 HRS IST) 1. INDIAN OIL CORPORATION LIMITED (IOC),
More information11 263/ Radial Piston Pump Model R4 /Series 2X Fixed Displacement. Ordering Code 1 PF 1 R4 2X R Replaces:
ize.60 to 0.00 Rdil iston ump Model R4 /eries X Fixed Displcement 0,0 I (00 br).9 in /rev (9.4 cm /rev) RA 6/0.9 RA 6/0.9 Replces: 06.89 K 6/ Rdil piston pump with 0 pistons nd prllel shft Chrcteristics:
More informationVARIFLUX IFS 6000 Electromagnetic Flowmeter
KROHNE 04/2001 D 31 VR60 02 E GR/PRINTO IFS 6000 Electromgnetic Flowmeter for snitry nd septic pplictions For mny different ppliction fields with mny different types of process connections For mesurement
More informationDecor Radiators Baseboard
Decor Rditors Bsebord Pedestl 11 (with fins) Avilble in outputs from 1,561 to 10,282 Btu/hr; 2, nd 4 tubes high. 28 (igh Output, with fins) Avilble in outputs from 5,05 to 19,552 Btu/hr; 2 nd 4 tubes high.
More informationTWF SERIES. PLASTIC ENCLOSURE with WALL MOUNTING FLANGE. Accessories (Optional parts)
TWF SERIES PLASTIC ENCLOSURE with WALL MOUNTING FLANGE 1 Tehnil Dt Protetion lss: IP0 Operting temperture: -10 C ~ + C Multi-purpose flnged enlosure designed for use s wll-mounted devie/terminl. different
More informationVB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents
V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx
More informationSSAB Water mains PIPES AND FITTINGS
SSAB Wter mins PIPES AND FITTINGS Pipes nd fittings mnufctured y SSAB re used primrily with wter pipeline sizes DN 400-1200. The fittings re mde of steel pressure pipes (ex works delivery) nd cn e coted
More informationWINDSHIELD / WINDOWGLASS
WINSHIEL / WINOWGLSS QURTER WINOW GLSS QURTER WINOW GLSS OY WINSHIEL / WINOWGLSS OMPONENTS 97 RER SIE SETK FRME LH RER SIE SETK FRME RH RER SET USHION SSEMLY RER OOR OPENING TRIM WETHERSTRIP LH TONNEU
More informationSYSTEM FITTINGS FOR OUTWARD OPENING WINDOWS AND DOORS
SYSTEM FITTINGS FOR OUTWRD OPENING WINDOWS ND DOORS 201 - established 189 - IP + National seal Systems Ltd WOOD PROFILE HINGES & FITTINGS HINGES & FITTINGS SFETY TH & -RESTRITORS D ESPGNOLETTE OLTS E ESSORIES
More information4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6
4/2- nd 4/3-directionl spool vlve solenoid-operted, direct-cting 4WE 6 DESCRIION HYDC 4/2- nd 4/3- directionl spool vlves of the 4WE 6 series re directionl vlves for oil hydrulic systems which re used
More information2/2, 3/2 and 4/2 directional poppet valve with solenoid actuation
0/0 /, / nd / directionl poppet vlve with solenoid ctution.7 Type M-.SEW...LX Size Up to 0 r Up to 0 L/min Contents Function nd configurtion Symols 0 Specifiction 0 Technicl dt 0 Electricl dt 0 Chrcteristic
More informationCALL HEIGHT CARD READER TOP OF MONITOR FRONT SIDE CONCRETE SURFACE TO BE FLAT AND LEVEL IN AREA OF UNIT
R OPTEV 5 EXTERIOR SH DISPENSER 5 HIGH ND mm ( ") SFE L009 LL -800-999-600 HEIGHT DEPTH 65 TOP FUNTION KEY 06 (4 ") 8 ( (4 8 ") 89 (5 4 ") (4 8 ") (5 9 8 ") ( 98 8 ") (8 D E RD REDER REEIPT PRINTER DVNED
More informationCURRIES Technical Manual FireRatedProducts Section. Revised September, 2017
URRIES Technical Manual FireRatedProducts Section Revised September, 017 i Index September, 017 DESRIPTION PGE(S) 18 Gauge Three Sided Fire Door Frame.... 10-11 nchors Drywall (-Type) Frame.... 0 Drywall
More informationGo to the page for your application: face frame page 9, panel page 11, or narrow frame aluminum door page 13.
Using this tlog Step 1: Determine your pplition Go to the pge for your pplition: fe frme pge 9, pnel pge 11, or nrrow frme luminum door pge 13. Step 2: Clulte the power ftor Determining the Power ftor
More informationTubing, Fittings and Air Handling System Components
Tubing, Fittings and ir Handling System omponents INDEX Tubing 5 METLLI TUING ND FITTINGS FOR IR HNDLING SYSTEMS Standard fittings Special fittings Vacuum system inlet valves Special fabrication services
More informationDETAIL OF DUCT FABRICATION & SUPPORTS
DETIL OF DUT FRITION & SUPPORTS DESRIPTION IRNIN PETROLEUM STNDRDS NO REVISION PERMITTED UNLESS PPROVED Y STNDRD ORGNIZTION OVER SEET DRWING No. IPSDR013 ST 1 FIG. SUGGESTED SIZING DUT SIZE mm (in) ND
More informationWATERTIGHT AIRTIGHT SPECIAL ACCESS DOORS & HATCHES, PART 1 GENERAL
SECTION 08316 WTERTIGHT IRTIGHT SPECIL CCESS DOORS & HTCHES, PRT 1 GENERL HIGHLIGHTED RES TO BE INSERTED BY SPECIFYING ENGINEER. 1.1 WORK OF THIS SECTION. THE WORK OF THIS SECTION INCLUDES PROVIDING LL
More informationAppendix E Head and Valve Assembly Details All D-Style Models 351
Appendix E Hed nd Vlve Assemly Detils All D-Style Models FD Hed Vlve Holddown Assemlies Suction (spec P) 0 0 Suction (spec P) 0 0 Dischrge (ll specs) 0 WFD Hed Appendix E Hed nd Vlve Assemly Detils All
More informationGUARDIAN MEDIUM PRESSURE
GUARDIAN MEDIUM PRESSURE P1100 & P00 GUARDIAN INDUSTRIAL & ATEX Exi CERTIFIED PRESSURE SWITCH The stndrd rnge represents the bsi models to over pressure pplitions for settings of between 0. nd 19 br (3
More informationClearline. fusion. Installation. t<45mm Universal Roofing Kit F16 T F16 L. viridian. solar. v
Clerline Instlltion t
More informationSOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 80-5 FLUI EN FOR OMO F-600 PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ ¾ 5 5 ½ 6 6 ¼ 6 ½ 6 ¾ 7 7 ¼ 7 ½ F-600 600
More information-XC9: Adjustable Stroke Cylinder/Adjustable Retraction Type
-XC: djustle Stroke Cylinder/djustle etrction Type djustle Stroke Cylinder/djustle etrction Type The retrct stroke of the cylinder cn e djusted y the djustment olt. pplicle Series Series Description Model
More informationSTANDARD CONSTRUCTION DETAILS STORM DRAINAGE REVISED - MAY 2017 DEPARTMENT OF ENGINEERING
STNDRD CONSTRUCTION DETILS STORM DRINGE REVISED - MY 2017 DEPRTMENT OF ENGINEERING GENERL NOTES CONCRETE,SPHLT STREET REPIR,PIPE EDDING UTILITY SUPPORT,WTER MIN LOWERING,CONCRETE COLLR TYPE "" STORM SEWER
More informationOHIO DEPARTMENT OF TRANSPORTATION CENTRAL OFFICE, 1980 W. BROAD ST., COLUMBUS, OHIO
OHIO DEPRTMENT OF TRNSPORTTION ENTRL OFFIE, 80 W. ROD ST., OLUMUS, OHIO 432-08 pril 2, 207 To: Users of the Stndrd ridge Drwings From: Tim Keller, dministrtor, Office of Structurl Engineering y: Sen Meddles,
More informationHORIZONTAL SLIDER - NON-IMPACT
2 /" FLNGE WIDTH " MX. UNIT WIDTH 3 /" MX. SSH WIDTH HORIZONTL SLIDER - NON-IMPT 3 /" MX. SSH WIDTH 3/" GLSS DLO 3/" GLSS DLO GENERL NOTES:. THE PRODUT SHOWN HEREIN IS DESIGNED ND MNUFTURED TO OMPLY WITH
More informationA/S J. PETERSENS BESLAGFABRIK
/S J. PETERSENS ESLGFRIK SYSTEM FITTINGS FOR OUTWRD OPENING WINDOWS ND DOORS 2015 - established 189 - /S J. PETERSENS ESLGFRIK WOOD PROFILE FOR IP SYSTEM FITTINGS HINGES & FITTINGS FOR SIDE HUNG WINDOWS
More informationCast Stainless Steel Butt-Weld Outlet Connection Data
180 Stainless Steel Cast Stainless Steel utt-weld Outlet Connection Data Josam cast stainless steel drains and cleanouts are regularly furnished with Schedule 40S butt-weld outlet connections. utt-weld
More information3/2 and 4/2-way Directional Poppet Valves with Solenoid Operation Model M-SED 6, Series 1X. Size 6 (350 bar) H/A 4243/94
3/2 nd 4/2-wy Directionl oppet Vlves with Solenoid Opertion Model M-SED 6, Series X Size 6 000 SI (30 r) 6.6 GM (2 L/min) R 22 049/06.98 R 22 049/06.98 Replces: 02.96 Fetures: Direct operted directionl
More informationMANN+HUMMEL Oil-bath air cleaner Single-stage air cleaner without spare parts
MANN+HUMMEL Oil-th ir clener Single-stge ir clener without spre prts 57 Oil-th ir clener: Servicing without spre prts The proven oil-th ir cleners from MANN+HUMMEL re suitle for light to medium dust conditions
More informationCable Ties. Nylon Cable Ties
able Ties Nylon able Ties ELETRIL SUPPLIES all us 718.361.2300 or Fax 718.937.5671 Wire Terminals Terminals ELETRIL SUPPLIES all us 718.361.2300 or Fax 718.937.5671 Plugs, onnectors and Receptacles Turn-Lock
More informationBERMAD Fire Protection
BERMAD Fire Protetion 700E Deluge Vlve Dt Desription BERMAD 700E Deluge Vlves re Y Type gloe vlves with integrl unitized doule hmer tutor tht onsists of one single moving ssemly, whih inludes diphrgm ssemly,
More informationWAVE SPRINGS SPECIFICATION FORM
WVE SPRINGS SPECIFICTION FORM LOD Equal Deflection and Load LOD Reduced Operating Height REDUX TM Wave Spring Coil Spring RDIL WLL FREE HEIGHT WIRE THICKNESS OPERTES IN HOLE DIMETER CLERS ROD DIMETER TURNS
More informationAluminium Floor Outlets - Trapped Outlets
Aluminium Floor Outlets - Trpped Outlets Verticl Trpped Outlet Components Drin Body Dimensions 260 Grte* Funnel Sel Trp Assemly Funnel Cup * Elevtion Throt Throt Sel DPM Clmp Ring with Weep Bung (shown
More informationSeries AIR LINE COMPRESSED AIR DISTRIBUTION SYSTEM
Series IR LINE COMPRESSED IR DISTRIUTION SYSTEM 26 IR LINE IR DISTRIUTION SYSTEM FETURES ND ENEFITS Installation ease: IR LINE installations can be carried out easily by the end-user, eliminating the need
More informationAppendix E D791 and T791 Head and Valve Holddown Assembly Details
Appendix E D nd T Hed nd Vlve Holddown Assemly Detils Hed First Stge Holddown Assemly (") Suction with Unloder Suction (Stndrd) First Stge Holddown Assemly (") Dischrge See figure A 0 CAUTION: Alwys relieve
More informationRPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.
Solenoid - Operted Directionl Control Vlves RPEL-0 05/0 Size 0 (D 0) 50 r (600 PSI) 0 l/min (8.0 GPM) /-, /- nd /-wy directionl control vlves with solenoid control Solenoids cn e turned round their xis
More informationSOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 80-5 FLUI EN FOR OMO F-600 PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ ¾ 5 5 ½ 6 6 ¼ 6 ½ 6 ¾ 7 7 ¼ 7 ½ F-600 600
More informationXILINX, INC ML605 FAB DWG. NO REVISIONS DESCRIPTION APPROVED DATE 09/19/09 RL INITIAL RELEASE
+0, -0, +,00 -,00 +/- 8 7 REVISIONS ZONE REV DESRIPTION DTE PPROVED 0 INITIL RELESE 09/9/09 RL D NOTES: (UNLESS OTHERWISE SPEIFIED) THIS F SHOULD E "RoHS OMPLINT".. FRITE TO IP--00, URRENT REVISION. ORD
More informationALPHA STERN DRIVE 2 E TRANSOM ASSEMBLY
LPH STERN DRIVE E 73316 TRNSOM SSEMBLY Tle of Contents Pge Speifitions............................... E -1..................... E -1 Speil Tools............................ E -1 Lurints, Selers, nd dhesives.........
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt
More informationModel 3500 Transmitter (9-wire) or Model 3300 Peripheral
Quik Referene Guide P/N 3300995, Rev. C April 2003 Model 3500 Trnsmitter (9-wire) or Model 3300 Peripherl Instlltion Instrutions for Rk-Mount For online tehnil support, use the EXPERT 2 system t www.expert2.om.
More informationLippman Park Suspended Bridge Wawarsing, NY
Lippman Park Suspended ridge Wawarsing, NY LOTION MP SLE: "=00' List of rawings Sheet No. escription RIGE LYOUT RIGE SSEMLY STNTION SSEMLY STNTION ETILS 5 RILING ETILS 6 EKING ETILS 7 SUSPENER LES 8 NHOR
More informationSolenoid operated spool valve with soft switching NG10 ISO
WWMF1 Solenoid operted spool vlve with soft switching Flnge construction 4/3-wy with spring centred mid position 4/2-wy with spring reset Q mx = 12 l/min p mx = 35 r DESCRIION Direct operted solenoid spool
More informationSHEET 1 OF 6
REVISIONS REV DESCRIPTION CHG.NO. PP'D DTE SENSOR WELD NECK MOUNTING FLNGE & WELD FTG. (FCTORY WELDED) VILBLE IN SME B16.5 RF & RTJ, ND EN 1092-1 RF. REFER TO TBLE 1 ON SHEET 2 OR FOR S ND DIMENSIONS NEW
More informationAccessories. Guard grilles, streamers 362. Wall rings 372. Connection lines 374. Accessories for Q-motors and energy-saving motors (ESM) 374
Aessories Generl informtion Gurd grilles, stremers 362 Wll rings 372 fns Connetion lines 374 Aessories for Q-motors nd energy-sving motors (ESM) 374 Terminl boxes, pitors, speed setting devies, motor protetion
More informationACCESSORIES. Table of Contents. Section 8A - All Models
SERVICE MANUAL NUMBER 11 Tle of Contents ACCESSORIES Setion 8A - All Moels ACCESSORIES - ALL MODELS Speifitions....................... 8A-2 Torque Speifitions............. 8A-2 Lurints/Selers/Ahesives......
More informationUSCAR - T4/V4 ISO VIEW (WITH CLIP SLOT)
INEX PGE TITLE PGE TITLE LOK / ONNETOR SPEIFITIONS REVISION LOK / GENERL NOTES SM IGRM / KEYING TLE PRT LOK [KP LOK (IF REQUIRE)] EXPLOE VIEW / MTERIL SPEIFITIONS 5 TUM LOTIONS / FETURE ONTROL VIEWS 6
More informationThe widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.
FUME XTRACTION ARMS Improving your workspce Chemicl resistnt Antisttic Stndrd FX ARMS The widest rnge to provide the optimum tilor mde solutions to your fume nd gs extrction needs. Avilble in Stndrd, Antisttic
More informationL-BRACKET INSTALLATION
L-BRACKET INSTALLATION Consult the omplete Instlltion Guide for ll other spets of fn instlltion nd sfety guidelines. WARNING: The fn should not e instlled unless the struture on whih the fn will e mounted
More informationHYDRANT & GATE VALVE INSTALLATION
HYDRNT FLG TO BE INSTLLED ON THE NOZZLE SECTION 5' TYPICL (3' MINIMUM) HYDRNT, CLOW MEDLLION 1.0' HYDRNT STEMER KIT - 4.5" NH - 5" STORZ METL FCE DPTER WITH STORZ CP. IF OPTIONL LOCKING CP IS DESIRED,
More informationTransmission and Driveline. Section 2A - Transmission and Driveline
Trnsmission nd Driveline Trnsmission nd Driveline Tle of Contents Section 2A - Trnsmission nd Driveline 2 A Generl Informtion...2A-2 Ger Rtio Selection...2A-2 Engine nd Propeller Shft Instlltion Angle...2A-2
More information4/3, 4/2 and 3/2 explosion-proof solenoid directional valve
01/06 4/3, 4/2 nd 3/2 explosion-proof solenoid directionl vlve Type G...WE6...L6X 2.21 Size (NG) 6 Up to 350 br Up to 80 L/min Contents Function nd configurtion Specifictions 03 Spool symbols 03 Technicl
More informationPERSEUS DIFFERENTIAL PRESSURE DF61 & DF62 ATEX & IECEx Exd, Exia & INDUSTRIAL DIFFERENTIAL PRESSURE SWITCH
PERSEUS DIFFERENTIAL PRESSURE DF61 & DF62 ATEX & IECEx Exd, Exi & INDUSTRIAL DIFFERENTIAL PRESSURE SWITCH The ltest innovtion to our rnge of swithes fetures robust high qulity housing with 1 or 2 seled
More informationPOWER TRIM. Table of Contents. Section 5B - Trim Cylinders
Tle of Contents POWER TRIM Setion 5B - Trim Cylinders Speifitions......................... 5B-2 Torque Speifitions............... 5B-2 Lurints/Selers/Adhesives........ 5B-2 Speil Tools.........................
More informationN2-GEN. TL SERIES Nitrogen Generators. Arc Suppression System. Transmission Line Pressurization. South-Tek
TL SERIES Nitrogen Generators Transmission Line Pressurization N2-GEN rc Suppression System www.southteksystems.com commercialsales@southteksystems.com 888.526.6284 South-Tek Systems 2 N 2 -GEN rc Suppression
More informationVacuum Relief Performance Curves
Vacuum Relief Valves Crispin Vacuum Relief Valves Valve Function llows air to enter system when vacuum occurs Prevents air exhaustion during pump start-up Features Cracks open to admit air at.25 PSIG differential
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl
More informationSeries 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
More informationCHARACTERIZATION BOARD DO NOT SCALE DWG
RT FILM - fab REVISIONS REV ESRIPTION TE PPROVE INITIL RELESE FE J.HU HNGES PER ER-0570 0PR J.HU HNGES PER ER-059078 0JN6 J.HU.075.75.05 HOLE TOLERNE UNLESS SPEIFIE PLTE: +/- MILS NON PLTE: +/- MIL.00
More informationA/S J. PETERSENS BESLAGFABRIK
/S J. PETERSENS ESLGFRIK SYSTEM FITTINGS FOR OUTWRD OPENING WINDOWS ND DOORS 2017 - established 189 - /S J. PETERSENS ESLGFRIK WOOD PROFILE FOR IP SYSTEM FITTINGS HINGES & FITTINGS FOR SIDE HUNG WINDOWS
More informationFIBERGLASS DAMPERS FOR ODOR CONTROL AND CORROSIVE HVAC SYSTEMS
FIERGLSS S FOR ODOR CONTROL ND CORROSIVE HVC SYSTEMS ELCO FIERGLSS S ELCO Fiberglass Dampers are manufactured to meet the needs of the odor control and corrosive HVC industries by providing a corrosion-resistant
More informationPRIMARY SIDE CHARACTERIZATION BOARD FABRICATION AD7791 EVAL BOARD DRILL CHART: TOP to BOTTOM ALL UNITS ARE IN MILS TOLERANCE 2.
RT FILM - fab REV REVISIONS ESRIPTION INITIL RELESE TE FE 0PR PPROVE J.HU J.HU.075.75.05.00 (REF) FIGURE RILL HRT: TOP to OTTOM LL UNITS RE IN MILS TOLERNE +.0/-.0 +.0/-.0 +.0/-.0 +.0/-.0 SIZE.0 0.0 5.0
More information9400/F9400 SERIES SURFACE VERTICAL ROD EXIT DEVICE
INSTLLTION INSTRUTIONS 9400/F9400 SERIES SURFE VERTIL ROD EXIT DEVIE 1135-28 www.dorm-us.om 1-800-523-8483 I9400-8 9/07 HNDING RHR LHR RHR LHR RHR LHR RHR LHR TYPIL INSTLLTIONS 9400 Series Devie 9400 Series
More information