CD 80. Swing door operator

Size: px

Start display at page:

Download "CD 80. Swing door operator"

Lesley Campbell
5 years ago
Views:

1 CD Swing door operator

Swing door operator DORMA CD Easy installation, aesthetic design, useful special functions! The CD from DORMA is a swing door operator that can cover both new and established areas of application.

2 Swing door operator DORMA CD Easy installation, aesthetic design, useful special functions! The CD from DORMA is a swing door operator that can cover both new and established areas of application. The operator has a modern, prize-winning and unobtrusive design as well as being impressively small. The low height of the unit allows it to be optimally combined with standard profile systems. The standard mounting plate provided minimises the work required for either door leaf or lintel/ top jamb fiing. After the plate has been fied, the operator is simply latched onto it; strenuous and eacting installation work is not required. The low weight of the operator (appro. 8.5 kg including the mounting plate) enables the CD to be fitted directly on the door leaf without causing ecessive hinge strain. Special functions ensure that the CD has the widest possible range of applications. Push&Go, Power Assist and an e tended hold open function all come as standard. The newly developed etended hold open function allows the door to be held open at an individually adjustable opening angle for a defined length of time of either 5 or 10 minutes. This function is particularly well-suited for use during loading and unloading operations or for ventilation purposes. Optimal cost effectiveness means that the CD can also be used to automate doors where automatic operators were previously outside of budget. The quiet operation of the CD also means that it is ideal for use in noise-sensitive areas (e.g. residential homes, offices and private dwellings). Benefits Minimal operator dimensions and weight Attractive design Quiet operation DIN Standard mounting plate for quick and easy installation Special functions included as standard Great value for money 2

3 Applications Single-leaf standard doors Door leaf width Door leaf weight Fiing positions Frame reveal depth Permissible door width and weights Door weight (kg) to 1500 mm (depending on door weight, see diagram) Up to 150 kg (depending on door width, see diagram) Top jamb fiing on the hinge (pull) side (operator variant G) Door leaf fiing on the opposite hinge (push) side (operator variant G) Top-jamb fiing on the opposite hinge (push) side (operator variant B) Door leaf fiing on the hinge (pull) side (operator variant B) With slide channel (all fiing options): 30 mm to 30 mm With standard arm* (top jamb fiing on the push side): 30 mm to 200 mm * The standard arm is only provided for top jamb fiing on the opposite hinge (push) side. Application of the standard arm increases the forces of the door so that manual operation is still possible, but not very comfortable. Where a standard arm is to be installed, DORMA recommends use of an appropriate activator rather than the Push & Go function. Permissible door specification Door width (mm) Technical data of the drive unit Closing force sim. to EN 4 Dimensions Height 70 mm Width/Length 660 mm Depth 90 mm Weight incl. mounting plate 8,5 kg Opening angle At least 100 feasible in any fiing position Supply voltage 230 V, 50/60 Hz Power supply for eternal accessories 24 V DC, 600 ma Class of protection IP 20 TÜV type-approved Compliant with the Low Voltage Directive and the EMC Directive Manufactured to ISO 9000 Adjustable parameters of the travel path Opening time adjustable 3 s to 6 s Closing time adjustable 3 s to 10 s, sim. to a door closer Hold-open time adjustable 0 s to 30 s Latching action adjustable Wall blanking adjustable Opening angle adjustable Angle for etended hold open function adjustable Delayed opening for locking mechanism adjustable Standard function programs and special functions Function programs via the program switch Off Automatic Permanent open Special functions included as standard Push & Go Power Assist mode Etended hold open function Optional special functions Airlock function X (additional accessories Timed airlock function X required) Flip-flop-function X Night-bank function X Door closer function under cut-out conditions Prepared for connection of the following accessories Softline slide channel Standard arm DORMA IRS-2-33/70/90/120 infrared sensors Door locking devices Electric strikes (fail-safe/fail-secure principle) DORMA SVP anti-panic motor lock with automatic locking action Access control system Activator (pushbutton, radar motion detector, DORMA AutoSwitch ) Radio remote control Eternal program switch Ratchet type hold-open for Softline slide channel when opening the door manually under cut-out conditions standard X optional 3

4 DORMA CD For single-leaf doors Top jamb fiing on the hinge (pull) side (with slide channel) LH (ISO 6) and RH (ISO 5) door (Eample: LH (ISO 6) door) , , Frame reveal depths of 30 mm to 30 mm Top jamb fiing on the opposite hinge (push) side (with slide channel) LH (ISO 6) and RH (ISO 5) door (Eample: RH (ISO 5) door) , Frame reveal depths of 30 mm to 30 mm Top jamb fiing on the opposite hinge (push) side (with standard arm) LH (ISO 6) and RH (ISO 5) door (Eample: RH (ISO 5) door) ,5 16,5 13, ,5 45 X Frame reveal depths of 30 mm to 200 mm 4

5 Wiring diagram 4 0,8 mm 2 11 CD ,8 mm 2 NYM 3 1,5 mm 2 2 0,8 mm 2 2 0,8 mm 2 4 0,25 mm 2 4 0,25 mm 2 4 0,8 mm 2 2 0,8 mm 2 2 0,8 mm A 3 1 Feeder 2 Emergency pushbutton 3 Two-pole-and-earth socket 4 Program switch (eternal) 5 Pushbutton, internal 6 Pushbutton, eternal 7 Electric strike 8 Radar, internal 9 Radar, eternal 10 Etended hold open pushbutton (eternal) 11 Swing door operator DORMA CD 12 Infrared sensor DORMA IRS-2 1 L1 N PE Mounting plate for the Softline slide channel CD ,5 A A Slide channel arm with additional ale etension 19 / 28 mm Ale Achsverlängerung etension mm mm Ale Achsverlängerung etension mm mm 42,5 33,5 5

6 DORMA CD For single-leaf doors Door leaf fiing on the hinge (pull) side (with slide channel) LH (ISO 6) and RH (ISO 5) door (Eample: LH (ISO 6) door) , Frame reveal depths of 30 mm to 30 mm Door leaf fiing on the opposite hinge (push) side (with slide channel) LH (ISO 6) and RH (ISO 5) door (Eample: RH (ISO 5) door) a 647 b , c 660 c = min. 141 mm; ma. 195 mm b = c 33 mm a = c 128 mm Frame reveal depths of 30 mm to 30 mm 6

7 DORMA CD DORMA IRS-2 infrared safety sensor DORMA IRS-2 Safety Reversal STOP Reversing The DORMA IRS-2 safety sensor is a monitoring module designed to safeguard the sweep range of automatic swing doors. It can be mounted travelling on the hinge (pull) and opposite hinge (push) side of the door. If mounted on the opposite hinge (push) side, the DORMA IRS-2 safety sensor acts as an activator to open the door in the close range of the door. As soon as an object is located on this side of the door, the door is reopened automatically due to a new activating impulse given by the safety sensor. In case that the safety sensor on the hinge (pull) side is activated, the automatic opening action of the door is stopped in order to avoid collisions with objects in the scanning range of the IRS-2 safety sensor. The technical principle of the safety sensor ensures that people and objects are detected at the same time. The scanning range of the IRS-2 is adjustable and infrared light is used to safeguard the driving phase of the door. As an active infrared sensor, the IRS-2 detects all static and moving objects, e. g. items or people, within its scanning range. The IRS-2 is available in different lengths and with a variable number of infrared sensors. Depending on the door width, DORMA recommends to select the longest-possible IRS-2 safety sensor variant with a maimum number of integrated infrared sensors as the scanning range grows in line with the number of infrared sensors. This ensures the maimum safety of the swing door. Benefits and features Scanning range Cross section 2 Available in the following lengths: 330, 700, 900 and 1200 mm 2 Suitable for LH (ISO 6) and RH (ISO 5) doors 2 Mounting on the hinge (pull) and opposite hinge (push) side 2 Suitable as opening activator for automatic doors 2 Ideal activating sensor for confined situations due to its small scanning range 2 May serve as travelling opening protection for swing doors 2 Monitoring of crushingand shearing edges 1 m 2 m 0 1 m 2 m 30 ma mm IRS-2 infrared safety sensor variants Number of integrated Length of safety sensors safety sensor IRS mm IRS mm IRS mm IRS-2-120/ mm IRS-2-120/ mm 7

8 DORMA CD System accesories Active infrared safety sensors IRS-2 active infrared safety sensor Colour Order No. IRS-2-33 IRS-2-70 IRS-2-90 IRS-2-120/2 IRS-2-120/3 with 1 sensor, length: 330 mm Power supply: 24 V DC, power consumption: 100 ma, silver (E 6/C O) Maimum load current: 0.2 A at 48 V DC, (traffic white) RAL Installation height: min. 0.5 m / ma. 2.5 m further RAL with 1 sensor, length: 700 mm Power supply: 24 V DC, power consumption: 100 ma, silver (E 6/C O) Maimum load current: 0.2 A at 48 V DC, (traffic white) RAL Installation height: min. 0.5 m / ma. 2.5 m further RAL with 2 sensors, length: 900 mm Power supply: 24 V DC, power consumption: 200 ma, silver (E 6/C O) Maimum load current: 0.2 A at 48 V DC, (traffic white) RAL Installation height: min. 0.5 m / ma. 2.5 m further RAL with 2 sensors, length: 1200 mm Power supply: 24 V DC, power consumption: 200 ma, silver (E 6/C O) Maimum load current: 0.2 A at 48 V DC, (traffic white) RAL Installation height: min. 0.5 m / ma. 2.5 m further RAL with 3 sensors, length: 1200 mm Power supply: 24 V DC, power consumption: 300 ma, silver (E 6/C O) Maimum load current: 0.2 A at 48 V DC, (traffic white) RAL Installation height: min. 0.5 m / ma. 2.5 m further RAL IRS-2 safety sensors Cable entry = ,6 4, L 38 8

30 Program switch When combining the system with a program switch out of the DORMA accessory range, the automatic door system even meets individual requirements and offers easy handling.

30 PG-D1 program switch 4-position, aluminium, white, for control unit A and B, flush-mounted, mm, Gira S-Color Order No.

9 30 Program switch When combining the system with a program switch out of the DORMA accessory range, the automatic door system even meets individual requirements and offers easy handling. These program switches are available in various designs have been conceived for all kinds of demands. Furthermore they offer various options, from a mechanical to a full-elec tronic version alternatively also lockable via Euro profile half-cylinder or in a full-electronic way via code. 2 Up to 4 different functions: Off, Automatic, Eit Only, Permanent Open 2 Electronic program switches in System 55 design to cope with the highest aesthetic demands PG-D1 AP = 47, UP = 7, PG-D1 program switch 4-position, aluminium, white, for control unit A and B, flush-mounted, mm, Gira S-Color Order No Mounting position for turn switch PG-D3 AP = 47,5 36 UP = 7,5 PG-D3 program switch 4-position, lockable, aluminium, white, control unit B, flush-mounted, mm, Gira S-Color 46 Order No Mounting position for turn switch PG-D PG-D4 program switch 4-position, lockable via Euro profile half-cylinder, white, flush-mounting, mm, bo for surface-mounting: Order No Flush-mounting bo

1 3 2 4 DORMA CD System accesories PG-D4 100 19 PUSH OUT 15 Thread M3 83,5 bo for surface mounting for PG-D4 for mechanical program switch, 100 65 mm standard frame, white

19142201170 15 77 21,5 19 PUSH OUT 65 EPS-D 13 10 R 30 EPS-D full-electronic program switch in System 55 design, 4-position, lockable via code or additional TL-ST S55 key

white, flush-mounting, System 55 19144701170 Key switch KT 3-1 Flush-/ Surface mounting 75 9 75 45 l 59 17 10 50 60 Flush-mounting version 10 9 19 Key switch KT 3-1 1 NO

10 DORMA CD System accesories PG-D PUSH OUT 15 Thread M3 83,5 bo for surface mounting for PG-D4 for mechanical program switch, mm standard frame, white Order No ,5 19 PUSH OUT 65 EPS-D R 30 EPS-D full-electronic program switch in System 55 design, 4-position, lockable via code or additional TL-ST S55 key switch, membrane keypad, aluminium coloured, white, flush-mounted, mm Order No Pushbuttons Pushbutton 12,5 Pushbutton Single-pole changeover contact, standard frame, white, flush-mounting, System 55 Order No Key switch KT 3-1 Flush-/ Surface mounting l Flush-mounting version Key switch KT NO contact, with Euro profile half-cylinder (can be replaced by any half-cylinder of a master-key system), you can only withdraw the key when it is in zero position, S aluminium, metal, mm KT 3-1 flush-mounting Order No KT 3-1 surface mounting Order No Key switch KT 8 Lettering Auf, Zu, 2 NO contacts, with Euro profile half-cylinder can be replaced by any half-cylinder of a master-key system), you can only withdraw the key when it is in zero position, aluminium, metal, mm KT 8 flush-mounting Order No KT 8 surface mounting Order No KT 8 Flush-/ Surface mounting PG 13,5 Surface-mounting version 10

Large-sized pushbutton (elbow) 274 254 6,5 30 304 Large-sized pushbutton (elbow) flush-mounting/surfacemounting,

90410015 20 57 Large-sized pushbutton (elbow) Large-sized pushbutton (elbow) surface-mounting, etra-flat design,

050231332 79 17 4,8 Large-sized pushbuttons Large-sized pushbutton with bo for flush-mounting, without switch pad, incl.

05095531332 82 224 Surface-mounted design 44 11 Large-sized pushbutton with bo for surface-mounting, without switch

11 Large-sized pushbutton (elbow) , Large-sized pushbutton (elbow) flush-mounting/surfacemounting, electrical, silver anodic coating CO, 304 mm Order No Large-sized pushbutton (elbow) Large-sized pushbutton (elbow) surface-mounting, etra-flat design, synthetic material, grey, mm ,5 Order No ,8 Large-sized pushbuttons Large-sized pushbutton with bo for flush-mounting, without switch pad, incl. switch, mm Order No Surface-mounted design Large-sized pushbutton with bo for surface-mounting, without switch pad, incl. 2 switches, paint sprayed for aluminium effect, mm Order No ,5 Switch pad aluminium, suitable for flush-/surface-mounting, mm Order No Flush-mounted design Switch pad aluminium, suitable for flush-/surface-mounting, mm, with inscription reading Tür auf Order No

DORMA CD System accesories CT 4/1 code keypad as control for locking devices (keypad and electronic module have to be combined) The code keypad does not

The metal keypad is waterproof and protected against manipulation thus it is also suitable for installation on the outside of a building.

The respective control unit is installed in the protected area and can be connected to all DORMA operators. Surface-mounting, 230 V/50 Hz, 1.

75 75 11.5 mm. MTB 4/1 metal keypad to enter the activation code (to open the door) and for programming purposes, surface-mounting, 75 75 11.5 mm Order No.

05063431332 Radar motion detectors Radar motion detectors detect approaching people at an early stage and emit an activation (opening) signal for the door

12 DORMA CD System accesories CT 4/1 code keypad as control for locking devices (keypad and electronic module have to be combined) The code keypad does not require optional software for simple access authorizations. The metal keypad is waterproof and protected against manipulation thus it is also suitable for installation on the outside of a building. The four- or si-digit code can be changed at the keypad via Plug & Play. The respective control unit is installed in the protected area and can be connected to all DORMA operators. Surface-mounting, 230 V/50 Hz, 1.5 V A, 1 UM potentialfree relay contact 8 A, 250 V, connections: ma. 2.5 mm, mm. MTB 4/1 metal keypad to enter the activation code (to open the door) and for programming purposes, surface-mounting, mm Order No EB 4/1 Electronic module, incl. 2 m connection cable, plastic cover, black, surfacemounting Order No Radar motion detectors Radar motion detectors detect approaching people at an early stage and emit an activation (opening) signal for the door operator. Radar motion detectors only respond to movements. Thanks to their various adjustment options, also difficult installations can be realised. Radar motion detectors with direction recognition Eagle 1 Direction recognition, black Order No Eagle black 120 Eagle white Eagle silver 100 white Order No silver Order No mm 34 8 mm Cable entry Merkur Cross traffic suppression with direction recognition, black Order No Merkur

DORMA BRC remote system The new DORMA BRC system operates with a bi-directional BidCoS wireless protocol.

Thus a short keystroke is enough to trigger an opening pulse in a reliable way within the system s typical field range of 100 meters.

BRC-R The new DORMA BRC-R radio receiver may easily be installed inside the operator as its size is adapted to the available space. Simply fi it on the motor-gear-unit with two screws.

BRC-R receiver 29300201 BRC-H The hand-held transmitter provides two individually allocatable channels. Feedback via integrated LED: orange, red and green. Shock proof design and DORMA keychain.

13 DORMA BRC remote system The new DORMA BRC system operates with a bi-directional BidCoS wireless protocol. In contrast to unidirectional systems, the receiver sends a message to the handheld transmitter that the signal has been received. The hand-held transmitter indicates the prevailing status via a LED. Thus a short keystroke is enough to trigger an opening pulse in a reliable way within the system s typical field range of 100 meters. The BRC-W and BRC-T transmitters are also of bi-directional design; however, the status indicator is not visible as the transmitters are integrated in pushbuttons. BRC-R The new DORMA BRC-R radio receiver may easily be installed inside the operator as its size is adapted to the available space. Simply fi it on the motor-gear-unit with two screws. We offer three different types of transmitters. Up to 1024 transmitters may be allocated to a DORMA BRC-R. Article No. BRC-R receiver BRC-H The hand-held transmitter provides two individually allocatable channels. Feedback via integrated LED: orange, red and green. Shock proof design and DORMA keychain. Article No. BRC-W receiver hand-held transmitter BRC-W The battery-operated wall transmitter in 55 mm design is made of white plastic and may easily be adhered to the wall or fied with screws. It is suitable for light indooruse. Article No. BRC-W wall transmitter BRC-T Battery-operated transmitter, designed for installation into a pushbutton with deep bo for flush-mounting or into a surface-mounted large-sized pushbutton. In connection with the DORMA stainlesssteel large-sized pushbutton it is also suitable for heavier conditions. Article No. BRC-T Battery-operated transmitter

Power transit device and cable loops Power transit device type 10305 13 17 5,3 5,3 41 5 5 4 58 D155 DORMA CD System accesories 71 Power transit device Type 10305 two-pole, to transfer electric

05045231332 Cable loops 300 KÜ 300 cable loop Fleible metal loop for protection of cables between door and door frame, ma. cable diameter: 5 mm, Length: 300 mm Order No.

14 Power transit device and cable loops Power transit device type ,3 5, D155 DORMA CD System accesories 71 Power transit device Type two-pole, to transfer electric current from the door frame to the door leaf while the door is closed. Order No Cable loops 300 KÜ 300 cable loop Fleible metal loop for protection of cables between door and door frame, ma. cable diameter: 5 mm, Length: 300 mm Order No KÜ 600 cable loop Fleible metal loop for protection of cables between door and door frame, ma. cable diameter: 5 mm, Length: 600 mm KÜ 300/ ,5 30 4,2 Order No Robust stainless steel spiral to protect fleible cables with a diameter of up to 8 mm between movable elements. KS 155/370 A 0,5 B C Spring secured by bending the shim A-B 16 Spring loose, not yet secured KS 155 cable loop Cable spiral for door hinges of up to 18 mm, to cover opening angles of up to 110, variable length: 155 mm, Installation dimensions (W H D): appro mm Order No KS 370 cable loop Cable spiral for door hinges of up to 36 mm, to cover opening angles of up to 1, variable length: 370 mm, Installation dimensions (W H D): appro mm C-D Order No Robust stainless steel spiral with recess bo for fleible connection cables, for cables with a diameter of up to 8 mm. Ensuring a pinch-free and sabotage-proof connection between the leaf and frame of doors and windows. KÜ 260/4 KÜ 260 cable loop for door hinges of up to 18 mm, to cover opening angles of up to 110, variable length: 155 mm, installation dimensions of recess bo (W H D): appro mm As linking element between the door leaf and the door frame, the cable loop is of special importance. Like all other DORMA products, these cable loops offer solidity and long product life. Therefore DORMA cable loops have an especially robust metal spiral, which ensures, together with the recess bo, the optimum protection of the contained fleible connection cables. Order No KÜ 4 cable loop for door hinges of up to 36 mm, to cover opening angles of up to 1, variable length: 370 mm, installation dimensions of recess bo (W H D): appro mm Order No

KÜ-CD cable loop for door-leaf mounted DORMA swing door operators 3 4 Junction bo (1) for cable loop (internal diameter: 12 mm or 200 mm), white, including accessories (2) 5 1 Order No.

The combination of Junction bo (1) Junction bo accessories (2) Cable loop (inner diameter 12 mm) (3) Cable loop (inner diameter 20 mm) (4) Adapter-unit (5) enables elegant concealment of all the

5163533332 Adaptor unit (5) to conceal the cabling on its way into the operator, combinable with both cable loops silver Order No. 5163133332 RAL 9016 (traffic white) Order No.

15 KÜ-CD cable loop for door-leaf mounted DORMA swing door operators 3 4 Junction bo (1) for cable loop (internal diameter: 12 mm or 200 mm), white, including accessories (2) 5 1 Order No cable loop (3) 600 mm, internal diameter: 12 mm, silver Order No The DORMA KÜ-CD cable loop offers the ideal solution for the door leaf fiing options of the CD operator. The combination of Junction bo (1) Junction bo accessories (2) Cable loop (inner diameter 12 mm) (3) Cable loop (inner diameter 20 mm) (4) Adapter-unit (5) enables elegant concealment of all the requisite cabling connecting the operator to the supply. Further accessories 5 2 cable loop (4) 600 mm, internal diameter: 20 mm, silver, incl. fiing elements Order No Adaptor unit (5) to conceal the cabling on its way into the operator, combinable with both cable loops silver Order No RAL 9016 (traffic white) Order No Red-green display The red-green display indicated the status of the door system. The etravagant, semicircular designer signal lamp is made of acryl, manufactured according to the latest LED technology and has a high-grade LED display (24 V, brilliancy according to DIN VDE (German association of engineers) 0834, part 1). The light signals are visible from both sides and the front even from a large distance. Its display is resis tant against almost all disinfectants and cleaning agents. Light signal, 24 V DC, LED-display red, green, white. Order No Emergency power supply unit In order to assure unlimited safety to all visitors of a building, every door system within this building has to remain fully functional even in the event of a power failure. This is ensured by the DORMA MT 700 USV emergency power supply unit. Depending on its equipment, this unit can maintain the function of an operator for up to one hour. During this time, the whole door system is provided with emergency power so that there remains sufficient time for countermeasures and securing the building. USV MT 700 VA emergency power supply unit integrated in 230-V power supply line Dimensions: mm (W H D) Order No

WN 052 428 51532, 11/10, CD, GB,.. /10 Subject to change without notice Door Control Automatic Glass fittings and Accessories Security Time and Access (STA) Movable Walls DORMA GmbH + Co.

au New Zealand DORMA HORIZON NZ LTD Phone +64 9 573-1999.nz Region Central Europe Belgium DORMA foquin N.V./S.A. Phone +32 50 451570 www.dorma.be Germany DORMA Automatic GmbH + Co.

dorma.ch Region Emerging Markets Bulgaria DORMA-BALKAN EOOD Phone +359 2 9714 904 Greece DORMA Representation Greece Phone: +30 21 09944388 India DORMA Door Controls India Pvt. Ltd.

) Ltd Phone +27 11 83002 Turkey DORMA Kapi Kontrolleri Ltd. Sti Sahraticedid Mah.

, Ltd. Phone +852 25034632.sg Region Far East Indonesia, Japan, Malaysia, Vietnam DORMA Emerald Entrance Systems Pte Ltd Phone +65 459 5733.sg Philippines DORMA Door Controls Pte. Ltd. Phone +632 893 77/8.

16 WN , 11/10, CD, GB,.. /10 Subject to change without notice Door Control Automatic Glass fittings and Accessories Security Time and Access (STA) Movable Walls DORMA GmbH + Co. KG DORMA Platz 1 D Ennepetal Phone /793-0 Fa / Division Automatic worldwide Region Australasia Australia DORMA Automatics Pty. Ltd. Phone au New Zealand DORMA HORIZON NZ LTD Phone nz Region Central Europe Belgium DORMA foquin N.V./S.A. Phone Germany DORMA Automatic GmbH + Co. KG Phone Luembourg Luembourg Subsidiary Automatic Phone Netherlands DORMA Nederland B.V. Phone Switzerland DORMA Schweiz AG Phone Region Emerging Markets Bulgaria DORMA-BALKAN EOOD Phone Greece DORMA Representation Greece Phone: India DORMA Door Controls India Pvt. Ltd. Phone Israel DORMA GmbH + Co. KG Phone Poland DORMA Polska sp. z o.o. Phone Russia DORMA Russia Phone South Africa DORMA Door Controls (Pty.) Ltd Phone Turkey DORMA Kapi Kontrolleri Ltd. Sti Sahraticedid Mah. Phone: Ukraine DORMA Sales Representative Vasyl Stuchylin Phone Region China China DORMA China Ltd. Phone sg Hong Kong DORMA Door Controls (Suzhou) Co., Ltd. Phone sg Region Far East Indonesia, Japan, Malaysia, Vietnam DORMA Emerald Entrance Systems Pte Ltd Phone sg Philippines DORMA Door Controls Pte. Ltd. Phone /8.sg Singapore DORMA Far East Pte. Ltd. (Sales) Phone sg South Korea DORMA Emerald Entrance Systems Pte Ltd Phone sg Taiwan DORMA Door Controls Pte. Ltd. Phone sg Region France France DORMA Accueil S.A.S. Phone Region Gulf Saudi Arabia DORMA Arabia Automatic Doors Ltd. Kingdom of Saudi Arabia Phone United Arab Emirates DORMA Gulf Door Controls FZE Dubai, United Arab Emirates Phone Region North America Canada DORMA Door Controls Phone Meico DORMA Méico, S. de R.L. de C.V. Phone USA DORMA Automatics Inc. Phone Region Scanbalt Denmark DORMA Danmark A/S Phone Estonia DORMA Representation Estonia Phone Finland DORMA Finland Oy Phone Lithuania DORMA Norge AS Phone Norway DORMA Norge AS Phone Sweden DORMA Sverige AB Phone Region South America Argentina DORMA Sistemas de Controles para Portas Ltda Phone Brazil DORMA Sistemas de Controles para Portas Ltda. Phone br Region South-East Europe Austria DORMA AKS Automatic GmbH Phone Croatia DORMA Croatia d.o.o. Phone Czech Republik DORMA dverní technika CR, s.r.o. Phone Hungary DORMA AKS Automatic GmbH Phone Romania DORMA Romania S.R.L. Phone Slovakia DORMA Slovensko spol. s.r.o. Phone Slovenia DORMA Representation Slovenia ICL d.o.o. Phone Region South Europe Italy DORMA Italiana S.r.l. Phone: Portugal DORMA Portugal para Portas, Lda. Phone Spain DORMA Ibérica, S.A. Phone Region UK/Ireland Ireland DORMA Ireland Limited Phone Great Britain DORMA UK Limited Phone

CS 80 MAGNEO. Automatic sliding door operator

CS 80 MAGNEO. Automatic sliding door operator CS 80 MAGNEO Automatic sliding door operator CS 80 MAGNEO Schiebetürautomatik Automatic sliding door operator CS 80 MAGNEO An unrivalled automatic sliding door operator. The CS 80 MAGNEO is excelled by