INSULATED TOOLS VDE BI LINE VDE LINE. wrenches. screwdrivers
|
|
|
- Richard Henry
- 5 years ago
- Views:
Transcription
1
2 RE YOU EQUIPPE TO TKE SPEIFIITIES OF YOUR WORK? Protection against shock from energised sources greater safety! Unior insulated VE tools ensure ultimate protection even when used around live circuits with up to a 1000-volt potential. The utility of all tools is thoroughly verified by means of the impact strength, electrical, flame-retardancy, insulation adhesion and stamp tests, with each tool being tested individually! IE 60900: V 06 VE I INE * material: special composition steel suitable for hardening and * forged, * *, * surface finish: chrome plated * heavy duty double component handles * jet stamp Unior G e t r e a d y f o r a h i g h - v o l t a g e f u t u r e. E & G Tools (M) Sdn hd Tel : / Fax : egtools@gmail.com Insulated wrenches, pliers, shears, screwdrivers and other tools for working with electrical and other power installations are made of high-quality tool steel with added protection, and designed for simple and safe use. VE insulated and tested according to the VE regulations, Unior tools for work in electrically live environments meet the requirements of the internationally acknowledged European EN standard. VE INE * material: special composition steel suitable for hardening and * forged, * * * surface finish: chrome plated * wrenches * material: chrom vanadium screwdrivers * blade: chrome-vanadium-molybdenum steel *, * three component material * * blade: chrome-vanadium-molybdenum steel * * handle: polypropylene * ouble layered insulation VE tools, double safety!!! - establish wear of your VE tools, just in time Hand tools for live working up to 1000 V.. and 1500 V.. The VE hand tools is in accordance to European standard EN 60900:2004 genda:.. - alternating current.. - direct current Every insulated hand tools is tasted individual on the end of production process. if second layer visible, replace your VE tool with the new one For correct use of insulated tools: - wear insulating glowes and eye protection - never use a tool, that looks unsafe - do not modify insulation - do not let others use your insulated tools - check standards and approval markings When working on electrical installations, the safest is to disconnect these systems from the energy supply first. Only skilled and qualified electrician may work on live installations. VE tools enable you highest protection, when working with high voltage. 124 IMENSIONS RE IN mm, WEIGHTS RE IN g. 2007
3 SFETY OK SYSTEM The socket will be released from ratchet with by simply pressing the button. Fit with our sockets 190 VE 1/2. * with 36 teeth * 30% higher torque upon IN standard * minimal angle of turn 10 * Hanging hole * Important inside parts of mechanism are metal. * Mechanical characteristics according with IN 7449 likes by our existence ratchet I uttons for changing the screwing directions HIGHER SEURITY N USER OMFORT omfort to the end user and perfect adaptability to the handle is assured by a heavy duty double - component handle. STMP TEST The indenter is loaded with a weight of 20N and is applied to the centre of the handle. The test is successful if the test piece subsequently passes the electrical test. FME RETRNY TEST The flame is applied to the test piece for 10 seconds. The test piece is acceptable if the height of the flame on the burning handle does not exceed 120 mm in an observation period of 20 seconds after the burner has been removed. INSUTION TEST efore testing the test piece is heated to 70 -/+ 2 for 168 hours. The hanger is loaded with weights (500 N). The duration of test is 3 minutes. The test piece is acceptable if the handle remains firmly attached to the conducting part. IMPT TEST The test is carried out at an ambient temperature of 23. The hammer is allowed to fall freely on the test piece 3 times. The test piece is acceptable if the handle is not cracked, broken or does not show signs of flaking. EETRI TEST (10kV) efore testing the tools are immersed in a bath of water at 23 for 24 hours +- 5 hours. The test pieces are acceptable if there is no electrical discharge, spark over or flashover, and if the current leakage is less than 1m for 20 mm insulation. 125
4 110 VE INSUTE SINGE OPEN EN WRENH material: chrome vanadium head: chrome plated 100% control - every peace is tested ode EN ,5 24,5 7, , ,5 8, , VE INSUTE SINGE OFFSET RING WRENH material: chrome vanadium head: chrome plated 100% control - every peace is tested ode EN , , ,5 11, , , , ,5 15, , ,5 17, ,5 375 SET OF INSUTE SINGE OFFSET RING WRENH 180VE IN RTON OX ode EN Set rt. 180 VE 10,11,12,13,14,15,17,19,22,24 110VE ode EN Set SET OF INSUTE OPEN EN WRENHES IN RTON OX rt. 190 VE INSUTE SOKET 1/2 110 VE 10,11,12,13,14,15,17,19,22,24 material: chrome vanadium head: chrome plated 100% control - every peace is tested 1 2 ouble layered insulation VE tools, double safety!!! - establish wear of your VE tools, just in time 126 f second layer visible, replace your VE tool with the new one ode EN 1 2 T ,4 54, , ,5 26,5 51, ,5 26,5 51, ,5 26,5 51, ,5 26,5 51, , , , , ,5 32, T 2007
5 190.4 VE INSUTE EXTENSION R 1/2 material: chrome vanadium head: chrome plated 100% control - every peace is tested ode EN VE INSUTE JUSTE WRENH material: chrome vanadium head: chrome plated 100% control - every peace is tested ode EN dim VE INSUTE OFFSET HNE 1/2 material: chrome vanadium chrome plated ode EN VE INSUTE REVERSIE RTHET 1/2 material: chrome vanadium with 36 teeth 30% higher torque than IN standard minimal angle of turn 10 important inside parts of mechanism are metal mechanical characteristics according to IN 7449 like our existing ratchet I button for changing the direction 100% control - every peace is tested ode EN E & G Tools (M) Sdn hd Tel : / Fax : egtools@gmail.com 192 HX VE INSUTE HEXGON SREWRIVER SOKET 1/2 material: socket: chrome molybdenum bit: special tool steel ode EN
6 190VE Set INSUTE SOKET SET 1/2 IN MET OX ode EN Set rt. 190 VE 10, 11, 12, 13, 14, 17, 19, 22, VE VE VE I INEMEN S PIERS ode EN utting capacities same as rt. 406 VE I 190VE6P11 INSUTE SOKET SET 1/2 IN MET OX ode EN Set rt. 190VE 13,14,17, VE VE HX VE 4,5,6,8, VE I WIRE STRIPPING PIERS stripping capacity: up to max mm2 spring for reopening ode EN , VE I OMINTION PIERS ode EN , , cutting capacity (10N = 1kg) im Wire max N/mm 2 Wire max. 650 N/mm ,6 2, ,8 2, ,0 2, ,0 3, VE I ONG FT NOSE PIERS flat long jaws gripping surface serrated ode EN
7 461 VE I IGON UTTING NIPPERS ode EN , , cutting capacity (10N = 1kg) im Wire max N/mm 2 Wire max. 650 N/mm ,6 2, ,6 2,5 466 VE I HEVY UTY IGON UTTING NIPPERS ode EN cutting capacity (10N = 1kg) im Wire max N/mm 2 Wire max. 650 N/mm ,8 3, ,8 3,0 476 VE I ONG ROUN NOSE PIERS long round jaws ode EN , VE I ONG NOSE PIERS WITH SIE UTTER gripping surface serrated half - round jaws ode EN , ONG NOSE PIERS WITH SIE UTTER N PIPE GRIP, 508 VE I STRIGHT gripping surface serrated half - round jaws ode EN , ,
8 400/7 VE SET OF VE I PIERS ON RTON ISPY ode EN ONG NOSE PIERS WITH SIE UTTER N PIPE GRIP, 512 VE I ENT 45 o gripping surface serrated half - round jaws jaws bent to an angle of 45 ode EN , , cutting capacity (10N = 1kg) im Wire max N/mm 2 Wire max. 650 N/mm ,6 2, ,8 2,5 rt. 406VE I VE I VE I VE I /1 VE I INSUTE WTERPUMP OX JOINT PIERS material: chrome vanadium entirely oil hardened entirely chrome plated jaw aperture adjustable in 7 position working surfaces induction hardened ode EN , max 447/1VE I ST ode EN SET OF WTERPUMP OX JOINT PIERS ON RTON ISPY VE I E SHERS for cutting the cable without steel wire ode EN max rt. 447/1 VE I max
9 905 VE I TOO SET VE I IN G ode EN VE OMINTION PIERS ; rt. 406 VE I VE I VE I VE I 160 ode EN , , cutting capacity (10N = 1kg) im Wire max N/mm 2 Wire max. 650 N/mm ,6 2, ,8 2, ,0 2, ,0 3,0 753 VE VE VE TI 0.4x2,5 603 VE TI 0.8x VE TI 1.0x VE TI VE TI VE 0,5x3,0 710 P 3m 905G 420 VE INEMEN S PIERS ; 906 VE I TOO SET VE I IN G ode EN ode EN utting capacities same as rt. 406 VE I rt. 461 VE I VE I VE TI 0.4x2,5 603 VE TI 0.8x VE TI VE 0,5x3,0 906G 478 VE VE WIRE STRIPPING PIERS stripping capacity: up to max mm2 spring for reopening ode EN ,
10 472 VE ONG FT NOSE PIERS flat long jaws gripping surface serrated ode EN VE HEVY UTY IGON UTTING NIPPERS ode EN cutting capacity (10N = 1kg) im Wire max N/mm 2 Wire max. 650 N/mm ,8 3, ,8 3,0 461 VE IGON UTTING NIPPERS ode EN , , cutting capacity (10N = 1kg) im Wire max N/mm 2 Wire max. 650 N/mm ,6 2, ,6 2,5 506 VE ONG NOSE PIERS WITH SIE UTTER gripping surface serrated half - round jaws ode EN , VE ONG ROUN NOSE PIERS long round jaws ode EN ,5 130 ONG NOSE PIERS WITH SIE UTTER N PIPE GRIP, 508 VE STRIGHT gripping surface serrated half - round jaws ode EN , ,
11 905 VE TOO SET VE IN G ode EN VE ONG NOSE PIERS WITH SIE UTTER N PIPE GRIP, ENT gripping surface serrated half - round jaws jaws bent to an angle of o ode EN , , rt. 406 VE VE VE VE VE E SHERS for cutting the cable without steel wire ode EN max 753 P P 3m 603VE 0.4x2,5 603VE 0.8x VE 1.0x VE 1 613VE VE 0,5x3,0 905G 906 VE TOO SET VE IN G ode EN rt. 461 VE VE VE 0.4x2,5 603VE 0.8x VE VE 0,5x3,0 906G 133
12 603S6VE TI SET OF SREWRIVERS VE TI ode EN EETRIIN S SREWRIVER WITH INSUTE 603 VE TI E, VE TI blade: chrome-vanadium-molybdenum steel three component material ode EN x 2, x 3, x x x x x rt. ode EN 603 VE TI 0.4x2,5x75+0.8x4.0x x5.5x x6.5x VE TI PH1x80, PH2x S6T VE TI SET OF SREWRIVERS VE TI WITH VOTGE TESTER rt. 603 VE TI 0.8x4.0x x5.5x x6.5x VE TI PH1x80, PH2x VE S6VT SET OF SREWRIVERS VE TI ROSSTIP (PH) SREWRIVER WITH INSUTE 613 VE TI E, VE TI blade: chrome-vanadium-molybdenum steel three component material ode EN PH PH PH PH PH ode EN rt. 603 VE TI 0.4x2,5x75+0,5x3, 0x x4.0x x5.5x VE TI PH1x80, PH2x100 2 SET OF SREWRIVERS VE TI WITH VOTGE 603S6TVT TESTER ode EN rt. 603 VE TI 0,5x3,0x x4.0x x5.5x VE TI PH1x80, PH2x VE OUE ROSSTIP (PZ) SREWRIVER WITH 623 VE TI INSUTE E, VE TI blade: chrome-vanadium-molybdenum steel three component material ode EN PZ PZ PZ PZ
13 603S50VE TI ode EN SET OF SREWRIVERS VE TI ON ISPY STN S6VE TI ode EN SET OF INSUTE HEXGON SREWRIVERS VE TI rt. 620 VE TI 2,5,3,4,5,6,8 6 rt. 603 VE TI 0,4x2,5x VE TI 0.8x4.0x VE TI 1.0x5.5x VE TI 1.2x6.5x VE TI 1,2x8,0x VE TI PH0x VE TI PH1x VE TI PH2x VE TI PZ1x VE TI PZ2X100 5 INSUTE SOKET WRENHES WITH VE TI 629 VE TI HNE blade: chrome-vanadium-molybdenum molybdenum steel three component material ode EN S6VE TI SET OF INSUTE SOKET WRENHES WITH VE TI HNE ode EN HEXGON SREWRIVER WITH INSUTE E 620 VE TI VE TI blade: chrome-vanadium-molybdenum steel three component material ode EN , rt. 629 VE TI 5.5,6,7,8,10,13 6 E & G Tools (M) Sdn hd Tel : / Fax : egtools@gmail.com 135
14 SREWRIVER WITH INSUTE E VE TI WITH 621 VE TI TX PROFIE blade: chrome-vanadium-molybdenum steel three component material ode EN S6VE TI ode EN SET OF INSUTE SREWRIVERS VE TI WITH TX PROFIE EETRIIN S SREWRIVER WITH 603 VE INSUTE E, VE blade: chrome-vanadium-molybdenum molybdenum steel handle: polypropylene ode EN ,4 x 2, ,5 x 3, ,6 x ,8 x ,0 x ,2 x ,2 x ,6 x rt. 621 VE TI TX10,15,20,25,27, S50VE SET OF SREWRIVERS VE ON ISPY STN ode EN ROSSTIP (PH) SREWRIVER WITH 613 VE INSUTE E, VE blade: chrome-vanadium-molybdenum molybdenum steel handle: polypropylene ode EN PH PH PH PH rt. 603 VE 0,4x2,5x VE 0,8x4,0x VE 1,0x5,5x VE 1,2x6,5x VE 1,2x8,0x VE PH0x VE PH1x VE PH2x VE PZ1x VE PZ2X VE OUE ROSSTIP (PZ) SREWRIVER WITH INSUTE E, VE blade: chrome-vanadium-molybdenum molybdenum steel handle: polypropylene ode EN PZ PZ PZ PZ
15 603S6VE SET OF SREWRIVERS VE ode EN VE VOTGE TESTER V dimension 140 with clip rt. 603 VE 0.4x2,5x x4.0x x5.5x x6.5x VE PH1x80, PH2x ode EN ,5 x 3, ,6 x 3, S6T VE ode EN rt. 603S6VE ode EN SET OF SREWRIVERS VE rt. SET OF SREWRIVERS VE WITH VOTGE TESTER 603 VE 0.8x4.0x x5.5x x6.5x VE PH1x80, PH2x VE VE 0,4x2,5x75+0,5x3,0x 100+0,8x4.0x ,0x5,5x VE PH1x80, PH2x100 2 SET OF SREWRIVERS VE WITH VOTGE 603S6TV TESTER ode EN rt. 603 VE 0,5x3,0x100+0,8x4,0x 100+1,0x5,5x VE PH1x80, PH2x VE VE STRIGHT TWEEZERS ode EN VE ENT TWEEZERS ode EN E & G Tools (M) Sdn hd Tel : / Fax : egtools@gmail.com 137
16 385 VE INSUTE KNIFE ode EN VE INSUTE SW repleaceble blade ode EN E & G Tools (M) Sdn hd Tel : / Fax : egtools@gmail.com
WRENCHES WHERE DO YOU DIRECT YOUR OWN EFFORTS? I n the force s of the p re sent lies the power of the future
I n the force s of the p re sent lies the power of the future WHERE DO YOU DIRECT YOUR OWN EFFORTS? Precisely and firmly onto screw heads and nuts. Without accidental injuries! Thanks to their innovative
WRENCHES COMBINATION WRENCHES RATCHET COMBINATION WRENCHES RATCHET RING WRENCHES IN-1 RATCHETS RATCHET WRENCHES MODULES ...
WRENHES...22 OMINTION WRENHES...28 RTHET OMINTION WRENHES...32 RTHET RING WRENHES...32 4-IN- RTHETS...33 RTHET WRENHES MODUES...34 OPEN-END WRENHES...36 DIN WRENHES...37 OFFSET RING WRENHES...39 NGED SOKET
SONIC GM Express Service Tool Kit*
SONIC GM Express Service Tool Kit* Drawer 1 E107901 Empty Foam for the 26" SFS 79pcs 1/4" Combination Socket Set & Screwdrivers 1 ea 1310 Screwdriver, PH.0 1 ea 1311 Screwdriver, PH.1 1 ea 1312 Screwdriver,
MISCELLANEOUS WOOD CHISEL
MISCELLANEOUS WOOD CHISEL In hanger WOOD CHISEL SET - Grounded and lacquered blade - Hardened blade - Ergonomic bimaterial handle 74 0 3,0 74 3,8 744 4 3,9 74 3,99 748 4, 7 0 4,3 7 4,34 7 4,43 pieces -
Powerful Brands from Wiha.
Powerful Brands from Wiha. Proturn 3K Proturn 1K www.wiha.com Wiha Proturn 3K. The Handy All-Rounder. The Wiha Proturn 3K is a screwdriver with a multi-component handle. Both industrial users as well as
Handle: 20" Chain: 25"
Handle: 6" JTC-1147 6" CHAIN WRENCH Chain: 18" (400mm) Handle: 20" Chain: 25" JTC-1149 20" CHAIN WRENCH JTC-1150 12" STRAP WRENCH Handle: 12" Strap length: 36" JTC-1355 EUROPEAN DOOR HINGE / HANDLE KIT
06 Screwdrivers and bits
06 Screwdrivers and bits Magnetic bit Insert bit 109 112 holder Go through Bit set 113 115 screwdriver Bit holding Screwdriver 116 Screwdrivers set 118 120 driver Precision screwdriver 122 Insulated screwdriver
Professional Insulated Tools Supporting Arc Flash Protection. Innovations that work. 10,000 Volt Tested 1000 Volt Rated
Professional Insulated Tools Supporting Arc Flash Protection Innovations that work 10,000 Volt Tested 1000 Volt Rated 2 Insulated Testing Procedure Arc Flash Protection: Wiha Insulated tools can be a vital
Allen keys, spanners. T-Handle socket wrenches 1000 V. Right angle allen keys 1000 V. T-handle allen keys 1000 V. Cross type socket wrenches 1000 V
Allen keys, spanners T-Handle socket wrenches 1000 V chrome vanadium steel, full insulated, for hexagon nuts, DIN 7440, Right angle allen keys 1000 V chrome vanadium steel, for hexagon socket screws, full
Powerful Brands from Wiha. Proturn 3K Proturn 1K
Powerful Brands from Wiha. Proturn 3K Proturn 1K Wiha Proturn 3K. The handy all-rounder. The Wiha Proturn 3K is a screwdriver with a multi-component handle. Users in both industry and DIY appreciate the
Used for installation and dismantling designs such as pipes of almost any diameter. Handle: 20" Chain: 25"
JTC-1147 6" CHAIN WRENCH Used for installation and dismantling designs such as pipes of almost any diameter. Handle: 6" Chain: 18" (400mm) JTC-1149 20" CHAIN WRENCH Used for installation and dismantling
Adjustable wrenches. Filter and oil drain plugs wrenches. Safety cut
Wrenches Open end wrenches Combination wrenches Offset ring wrenches Slogging wrenches Adjustable wrenches T-handle wrenches Hexagon wrenches Filter and oil drain plugs wrenches Hook wrenches Long lifespan
25 RAILWAY STREET KINGSTON, ONTARIO K7K 2L7 (613) Fax:(613)
25 RAILWAY STREET KINGSTON, ONTARIO K7K 2L7 (613)546-6663 1-800-267-0920 Fax:(613)542-4451 EMAIL: info@levacsupply.com 330 LAURIER BLVD. P.O. BOX 460 BROCKVILLE, ONTARIO K6V 5V6 (613)345-1991 1-877-270-0317
Screwdrivers. Ergonomically designed handles. Greater torque. Slip-proof grip. Threecomponent. handle a. TBI Screwdrivers
Screwdrivers TBI Screwdrivers R Screwdrivers NI Screwdrivers VE Screwdrivers VE TBI Screwdrivers Bits Impct screwdrivers Other ccessories Ergonomiclly designed hndles The superior qulity of mterils used
Wiha Tools. For all work on or around electrical components.
Wiha Tools For all work on or around electrical components. Wiha PicoFinish electric. The VDE-GS tested precision screwdriver. The smooth-running turn-cap enables fast turning. Imprint with the screw symbol
SCREWDRIVER SETS 8 PIECE FLARED & POZIDRIV SCREWDRIVER SET PIECE TORX SCREWDRIVER SET 8 PIECE 1000 VOLT INSULATED SCREWDRIVER SET
Quality Since 1908 SCREWDRIVER SETS 8 PIECE FLARED & POZIDRIV SCREWDRIVER SET Slotted Tips: 3.5x75, 4x100, 5.5x100, 6.5x150, 8x150 Pozidriv Tips: Pz1x100, Pz2x125, Pz0x75 26.35 11.26 List Price 37.61 Ref:
Blue-coated tools NFE
v p. t t Blue-coated tools NFE 74 400 p. 147 p. 147 p. 147 p. 147 p. 147 p. 148 p. 148 p. 148 p. 148 p. 148 p. 149 p. 149 p. 149 p. 149 p. 149 p. 150 p. 150 p. 150 p. 150 p. 150 p. 150 p. 151 p. 151 p.
TOOL SETS. Handsaws 1
TOOL SETS Handsaws 1 2 Concrete saw & mitre saws + boxes INDEX Combination tool sets SOCKET SETS KRT951003 KRT951000 KRT951004 KRT951005 KRT500112 KRT500113 KRT500114 KRT951006 KRT951001 KRT951002 KRT951007
Professional Insulated Tools. Supporting Arc Flash Protection. Updated 3/1/10. Innovations that work. 10,000 Volt Tested 1000 Volt Rated
Professional Insulated Tools Supporting Arc Flash Protection Updated 3/1/10 Innovations that work 10,000 Volt Tested 1000 Volt Rated 2 Toll Free: (800) 494-6104 Arc Flash Protection: Wiha Insulated tools
Screwdrivers. Crimped conductors can be fastened in the corresponding connection chamber either by the direct plug-in technique or by means of screws.
rimped conductors can be fastened in the corresponding connection chamber either by the direct plug-in technique or by means of screws. Electric screwdrivers Weidmüller screwdrivers are ideal one-hand
Master Sets with Foam Tray Organizers
Master Sets with Foam Tray Organizers D096005-FT1T 1/2" Drive SAE Impact Sockets 6 Point Standard Sockets: 3/8" - 1-1/2" - 6 Point Deep Sockets: 3/8" - 1-1/2" Foam Tray Organizer: 21-3/4" (w) x 15" (d)
Depth of opening / Clamping width / Clamping range. Drive sections. Slotted Cross-slotted PH. Cruciform PZ. Hexagon internal.
echnical Symbols 0 y N C M D! $ + m b n c o d p e r f M R N S O U R V Weight (total) Length (total) Length (total) Length (total) Length of blade Length of blade Width across flats (Nominal Width) Width
socket bits Sonic offers you a wide variety of socket bits pozidrive slotted slotted one piece
socket bits Sonic offers a complete range of different socket bits. The socket bits are made of outstanding chrome vanadium quality and meet or exceed din standards. these sonic socket bits have Also a
D Piece 12 Point Standard Metric Socket Set. D Piece 6 Point Metric U-Joint Socket Set mm List Price: $ $120.
D004004 28 Piece 6 Point Standard SAE/Metric Socket Set SAE Standard: 3/16-9/16 Metric Standard: 4-15 mm 2, 6 Extensions Hand Driver U-Joint 45 Tooth Ratchet List Price: $170.74 $112.99 D004008 9 Piece
WRENCHES 12 PIECE RATCHETING COMBINATION WRENCH SET PIECE COMBINATION WRENCH SET PIECE OPEN JAW WRENCH SET
WRENCHES 12 PIECE RATCHETING COMBINATION Contains sizes 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm 72 tooth mechanism for 5 minimum working arc Manufactured from chrome vanadium steel and heat treated
VILLBEK LTD. D CATALOGUE INSULATE 2017 V1
2017 V1 INSULATE D TOOLS CATALOGUE IMPACT TEST There are two tests carried out: The first test is performed at an ambient of -25±3 C(the tools lay in a cold chamber for 2 hours), if with C marked test
E & G Tools (M) Sdn Bhd Tel : / Fax :
E & G Tools (M) Sdn Bhd Tel : 03-78044210/03-78044202 Fax : 03-78044212 Email : egtools@gmail.com 245 PNEUMTIC TOOS PNEUMTIC TOOS S o m e t i m e s i m m i n e n t s u c c e s s i s i n t h e a i r. O
HAND TOOLS WALL DRIVE PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR 2011 PIECES
SPANNERS COMBINATION Short Arm Ratchet Combination Spanners Manufactured from quality chrome vanadium steel with hardened jaws and high polish mirror finish, corrosion resistant and easy to clean. Conforms
Spanners. Spanners. Open-ended spanners DIN 3110 Chromium plated - < 15
Spanners Open-ended spanners IN 3110 Chromium plated - < 15 35201 Metric sizes 35301 Inch sizes 3,2 x 5,5 4 x 5 1/4 x 9/32 (6,3 x 7,1) 6 x 7 1/4 x 5/16 (6,3 x 7,9) 6 x 8 7 x 8 7 x 9 8 x 9 8 x 10 11/32
HAMMERS, PUNCHES AND CHISELS
HMMERS, PUNCHES N CHISES HMMERS, PUNCHES N CHISES T o m o r r o w s s u c c e s s i s a s e d o n s e l e c t e d p o i n t s o f a c t i o n. HOW CCURTE IS YOUR HIT T THE TRGET POINT? With a suitale tool
Made from chrome-molybdenum
JTC-1605 DELUXE CROWS-FOOT WRENCH SET Made from chrome-molybdenum steel with a gap for use on union nuts fitted in hydraulic oil, diesel injection, and compressed air systems. Spec: 10-pcs o 3/8" DR. x
MOBILITY 429, 1549, NEW SELECTION 2018 / EN. gedore.com BASIC TOOL SET in case, 74 pieces
MOBILITY SELECTION 2018 / EN NEW 1041-1 BASIC TOOL SET in case, 74 pieces 429,. 1110 WMW-S-03 TOOL ASSORTMENT for WORKMO B3 110 pieces 1549, gedore.com MOBILITY GEDORE WORKMO THE MOBILE ORDERLY ARRANGEMENT,
$4.99 $26.99 $19.99 $25.99 $7.99 $10.99 $12.99 $15.99 $17.99 $ Rubber Mallet-Hickory Handle. Dead Blow Hammer-Fiberglass Handle
Two or three jaws design for Spring-loaded jaws for quick and easy one person set-up for different applications Heavy duty forcing screw with live center for strong even pulls Spread range from 3 to 7
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION Brand C.K Product Range Dextro Screwdrivers Catalogue number 49110, 49112, 49113, 49117, 49125, 49153, 49162 & 49163 Date 18/12/2008 Range Description A range of Professional quality
04 Spanners and Wrenches
04 Spanners and Wrenches ouble open end spanner 73 Open slogging wrench 75 Combination Insulated wrench 75 76 spanner Offset ring spanner 78 Ring slogging wrench 80 Flat ring spanner 81 Offset ratchet
Wiha new products brochure 2011.
Wiha new products brochure 2011. Valid from 1.3.2011 Wiha Content. DynamicJoint Wiha slimtechnology Maximum cutting performance Up to 40% less force required for cutting Long life maximum cutting quality!
Handle: 20" Chain: 25"
JTC-1147 6" CHAIN WRENCH Handle: 6" Chain: 18" (400mm) Handle: 20" Chain: 25" JTC-1149 20" CHAIN WRENCH JTC-1150 12" STRAP WRENCH Handle: 12" Strap length: 36" JTC-1355 EUROPEAN DOOR HINGE / HANDLE KIT
LIFETIME WARRANTY
102016 LIFETIME Superglue Gel Knee Pads Flashlights Packing Tape Duct Tape Blue Painter s Tape Vinyl Electrical Tape Teflon Tape Caution Tape Full Range Cutting Tools SIZE DECIMAL SIZE DECIMAL SIZE DECIMAL
Why Dynamic Toolboxes?
Why Dynamic Toolboxes? All drawers feature ball bearing slides for smooth operation Scratch and solvent resistant powder coat finish Drawer liners included Tubular lock and key for maximum security Heavy-duty
CIMCO cjenik Pakiranje (PAK): 0 = 1 kom / 1 = 50 kom / 2 = 100 kom / 3 = 250 kom / 4 = 1000 kom Šifra
97618 FOAM EMPTY 0 4024525976189 100 39269097 286 100000 DIAGONAL CUTTING NIPPERS 160 0 4021103999998 185 82032000 328 100024 Flatpliers VDE 160 MM 0 4021103000243 160 82032000 166 100030 LEAD SEAL PLIER
Standard program. Tool cases. ...convincing solutions. Hard top tool cases, Leather tool cases
Standard program Tool cases Hard top tool cases, Leather tool cases...convincing solutions Assortment boxes, wallets, tool cases Metal tool boxes 5 compartments, complete black powder coating Tool case
Wire Piercing Guide Heavy Duty Circuit Tester 6, 12, 24 Volt Professional Circuit Tester 6, 12 Volt
ELECTRICAL SERVICE Wire Piercing Guide 302003 n Quickly and easily guides tester probe into the centre of vehicle electrical wires n Eliminates stabbing of fingers when piercing wires n Holds the circuit
PRODUCT CATALOGUE. Distributor: BODDINGTONS ELECTRICAL PRODUCT CATALOGUE EDITION 3
BODDINGTONS ELECTRICAL PRODUCT CATALOGUE EDITION 3 PRODUCT CATALOGUE w w w. b o d d i n g t o n s - e l e c t r i c a l. c o m Distributor: Prospect House, Queenborough Lane Great Notley, Braintree, CM77
Industrial Equipment CONTENT Hand Tools 703 Hydraulic Tools 731 Wash Down and Cleaning 743
Industrial Equipment CONTENT 2 3 Hand Tools 703 Hydraulic Tools 73 Wash Down and Cleaning 743 7 702 www.pirtek.com Industrial Equipment HAND TOOLS PRODUCT INDEX Pirtek offer a comprehensive range of tools
exclusively represented in the USA by:
exclusively represented in the USA by: Price List 2015 Terms of Delivery and Payment Number 1 IN CUSTOMER SERVICE! Here s why: NO MINIMUM ORDERS, NO STOCKING REQUIREMENTS, NO DROP SHIP FEES We don t believe
DIN DIN WRENCH COMBINATION WRENCH COMBINATION WRENCH SET DOUBLE OPEN END WRENCH
1 WRENCH COMBINATION WRENCH DIN 3113 Size (inch) Chrome plated Polished jaws and rings Chrome-Vanadium steel Hardened and tempered KW0100334 ¼ 105 x 15 x 5 20 KW0100335 5 /16 125 x 20 x 5 30 KW0100336
IMPERIAL TOOLS GD_PG_$KT-K10-$KP-ZOLLWERKZEUG-$ :00:49
IMPERIAL TOOLS 5 IMPERIAL TOOLS 1 2 3 4 page 270-272 5 6 7 8 page 273-282 9 10 11 12 page 282-285 13 14 15 16 17 page 285 i CONVERSION TABLE FROM INCHES TO MILLIMETRES conversion from mm to inch: 69,850
EXPERT by FACOM provides an affordable solution to all industrial and automotive professionals.
2 EXPERT by FACOM provides an affordable solution to all industrial and automotive professionals. Accurate and safe EXPERT tools are designed, developed and produced by FACOM s R&D teams to meet the professionals
Ferax newsletter
Ferax newsletter 2010-07 1 COMPRESSED AIR Quick couplings Quick couplings with hose connection Quick couplings with male thread Quick couplings with female thread Insert nipple with hose connection Insert
PROD UCT SPECIFICATION
and C.K oduct Range Sensoplus ESD Pliers talogue number 3703D, 3707D, 3760D, 3766D, 3767D, 3769D, 3770D, 3771D, 3772D, 3773D, 3775D, 3776D, 3777D, 3778D, 3779D, 3780D, 3781D, 3782D, 3783D, 3784D, 3786D,
D Piece 12 Point Standard Metric Socket Set 4-12 mm List Price: $25.65 $16.99
D004000 11 Piece 6 Point Standard SAE Socket Set 5/32"-9/16" List Price: $32.46 $21.99 D004008 9 Piece 12 Point Standard Metric Socket Set 4-12 mm List Price: $25.65 $16.99 $77.99 D004005 25 Piece 6 Point
WORKSHOP ESSENTIALS & TOOLS FOR HYBRID & ELECTRIC VEHICLES. Workshop Safety Vehicle Safety Personal Safety High Voltage Tools & Testers
WORKSHOP ESSENTIALS & TOOLS FOR HYBRID & ELECTRIC VEHICLES Workshop Safety Vehicle Safety Personal Safety High Voltage Tools & Testers Workshop Safety 6700 Set of 4 Posts, Bases and 25 Metre Chain Plastic
Live Line tools and Arc-Flash protection
Live Line tools and Arc-Flash protection 2018 PRODUCT CATALOGUE We provide everything in tools and safety equipment, from LLE tools to Arc Flash protection. SAB ELTEKNIK AB, MJÖBÄCKSVÄGEN 2, 512 60 ÖVERLIDA,
exclusively represented in the USA by:
exclusively represented in the USA by: 2013 Terms of Delivery and Payment Number 1 IN CUSTOMER SERVICE! Here s why: NO MINIMUM ORDERS, NO STOCKING REQUIREMENTS, NO DROP SHIP FEES We don t believe in minimum
Measuring tools. Accuracy in measurement. Test-safe use. Multiple versions. Torque wrenches. Vernier calipers Spirit levels Mason s profiles
Measuring tools Torque wrenches Vernier calipers Spirit levels Mason s profiles Try squares Feeler gauges Other measuring tools Measuring tapes Accuracy in measurement Measuring tapes, torque wrenches
1 JULY ~ 30 AUGUST 2013 Micro - Tec
*All Prices Excl VAT* WINTER SPECIALS E&OE 1 JULY ~ 30 AUGUST 2013 KI-1312 R1 277.00 Sq. Dr Heavy Duty Composite Mini * Impact Wrench *Handle Exhaust with Muffler Sq. Dr: : 11000RPM : Max Torque: 60 NM
Tools and ferrules. Contents. Tools and ferrules. Tools and ferrules J.1
Contents Cutting, stripping and crimping tools.2 Rechargeable and electric torque screwdriver.10 Screwdrivers.12 Wire end ferrules / Insulated cable lugs.21 Wire end ferrules with plastic collar.22 Twin-wire
GENUINE PARTS INSTALLATION INSTRUCTIONS
GENUINE PARTS INSTALLATION INSTRUCTIONS DESCRIPTION: APPLICATION: PART NUMBER: KIT-CARBON FIBER REAR SPOILER INFINITI Q50 T99J1 J5000 KIT CONTENTS: Item A B C D Qty. 1 4 1 1 Part Description Spoiler Assembly
PERFORMANCE EXHAUST INSTALLATION INSTRUCTIONS. PART NUMBER: D or D BLK APPLICATION: 2019 BMW F90 M5
PERFORMANCE EXHAUST INSTALLATION INSTRUCTIONS PART NUMBER: D660-0079 or D660-0079-BLK APPLICATION: 2019 BMW F90 M5 Congratulations for being selective enough to use a Dinan Performance Exhaust. We have
VRHUNSKI NJEMAČKI IZOLIRANI ALATI ISO GERMANY S A F E T Y - T O O L S
VRHUNSKI NJEMAČKI IZOLIRANI ALATI ISO GERMANY S A F E T Y - T O O L S Dear customer, In the year 2006 we celebrate our 30th Company Anniversary. This is an opportunity to look back to what we have achieved
CATALOGUE SHOP ONLINE NOW
CATALOGUE 2018 SHOP ONLINE NOW Avex has been supplying the aircraft industry since our inception in 1965 and has grown to be the single most comprehensive supplier of aviation tooling since 1994. The Avex
Stanley Hand tools Features & benefits stanley Fatmax screwdrivers. 11 piece stanley Fatmax screwdriver set
Stanley Hand tools Features & benefits stanley Fatmax screwdrivers Ergonomically designed tri-lobular handle provides more torque than traditional-style screwdrivers for less effort. High strength polypropylene
SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.
SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions
NEW 2012 WHA T S PRODUCTS
NEW 2012 WHA T S PRODUCTS Cable Tie Gun Provides automatic tensioning and cut off of cable ties to produce a neat, clean and professional finish Simply wrap the cable tie around the item or job, feed the
TOOLS TO FIRE YOUR EMOTION! V4951 Ratcheting open-end wrench set. V Socket set. Closed solid steel ratchet V4944
TOOLS TO FIRE YOUR EMOTION! 2017-05-01 2017-08-1 V4951 Ratcheting open-end wrench set Hot Innovation! Closed solid steel ratchet V241 7 8 Socket set Hot Price! V4944 V494 HOT17-1/EN/NO/9 7 Valid until:
A SELECTION OF UNMISSABLE OFFERS FREE T-SHIRT. - Compact design - Speed regulator - Rear exhaust E BUY NOW SAVE 35% List Price: 107.
A SELECTION OF UNMISSABLE OFFERS CONTENTS Also inside amazing savings on Issue 02/2015 APRIL - JUNE 2015 AUTOMOTIVE Automotive p3 Storage p6 Socketry p7 AIR RATCHETS - Compact design - Rear exhaust blows
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. All 30482 S 2006 PILOT Issue Date P/N 08F23-S9V-100A SEP 2005 PARTS LIST Left front trim piece Right front trim piece Left rear trim piece
PRELIMINARY INSTALLATION INSTRUCTIONS. PARTS LIST Left front trim piece
INSTALLATION INSTRUCTIONS Accessory Application Publications No. All 30482 S 2006 PILOT Issue Date P/N 08F23-S9V-100A SEP 2005 PARTS LIST Left front trim piece Right front trim piece Left rear trim piece
News 3/8-1/2-3/4-1 AND 1½ IMPACT SOCKETS SOCKETS, BIT SOCKETS, TORSION BARS, EXTENSIONS, ADAPTORS, UNIVERSAL JOINTS AND MORE
News 3/8 - /2-3/4 - ND ½ IMPT SOKETS SOKETS, IT SOKETS, TORSION RS, EXTENSIONS, DPTORS, UNIVERS JOINTS ND MORE POR IMPT SOKETS ND ESSORIES 3/8 IMPT SOKETS ND ESSORIES 6038 3/8 6-POINT METRI IMPT SOKETS
NEW PRODUCTS GUIDE EDITION Oil Filter Remover Set 21 Piece. Oil Filter Remover Set Truck 6 Piece
EDITION 1. 2015 NEW PRODUCTS GUIDE 305900 Oil Filter Remover Set 21 Piece Professional 21 piece set supplied in blow mould storage case Manufactured from premium aluminium material to provide a long service
AUTOMOTIVE / INDUSTRY
MARYAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 24081 ACCORD 2-DOOR Issue Date SEP 2002 PARTS LIST INSTALLATION NOTE: Rear under spoiler Be careful not to damage the rear bumper and
PRO. ALL NEW ratchets from. 10% more compact HeaD for access to the tightest of SpaceS... the latest products at the best prices from
PRO INDUSTRY JAN - MAR 2017 the latest products at the best prices from ALL NEW ratchets from 10% more compact HeaD for access to the tightest of SpaceS... 10% more compact HeaD 72 tooth mechanism for
Screwdrivers 300
112 116 120 130 133 136 141 143 144 148 149 151 Screwdrivers 300 Industrial Plus Series The Industrial Plus series is specially developed for the toughest jobs. The handle is composed by an anti-slip thermoplastic
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. UNDER 2007 CIVIC SI All 33529 Issue Date AUG 2006 PARTS LIST Rear under spoiler Clip Rubber washer 6 Flange bolts 6 Flange nuts TOOLS REQUIRED
Safe & Convenient. NEW line of tools with Snap-in sensor detects AC voltage without contacting live wires. Audible Visual. Wire Strippers.
Safe & Convenient NEW line of tools with Snap-in sensor detects AC voltage without contacting live wires Wire Strippers NEW SNAP-IN SENSOR Work Lights Audible Visual Screwdrivers Pliers Electrician s Knives
RECOMMENDED TOOLS AND CHECKERS. Page RECOMMENDED TOOLS AND CHECKERS... 2
RECOMMENDED TOOLS AND CHECKERS Page RECOMMENDED TOOLS AND CHECKERS........... 2 4 1 09010-3C100 Hexagon Wrench Set (09013-6C100) ( Wrench 5 ) (09013-6C110) ( Wrench 6 ) (09013-6C120) ( Wrench 8 ) (09013-6C130)
3/8-Inch Torque Wrench Square Drive, Torque Range Of 30 to 250 Inch Pound (3.39 to NM)
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 57005 3/8" Torque Wrench Square Drive Klein Tools Catalog Number 57005 Manufacturer Klein Tools 3/8-Inch Torque Wrench
OCCUPATIONAL TOOLS AND EQUIPMENT LIST
OCCUPATIONAL TOOLS AND EQUIPMENT LIST Motor Vehicle Body Repairer (Metal and Paint) Government of Newfoundland Labrador Department of Advanced Education and Skills December 2011 Preface This document is
Standard program. Standard tools....convincing solutions
Standard program Standard tools...convincing solutions INFO Screwdrivers range Industrial quality The HAUPA screwdriver series features: homogenous size adjustment of the screwdriver handles for better
Our most competitively priced hand tools intended for light trade or serious DIY use, which are still covered by a lifetime guarantee*.
Our Ranges: Our most competitively priced hand tools intended for light trade or serious DIY use, which are still covered by a lifetime guarantee*. Our top-of-the-range hand tools suitable for the professional
General Maintenance Tool Kit (GMTK) Drawer layout
26 2 8 6 5 32 31 35 25 11 9 33 7 24 23 22 28 21 20 27 19 18 17 34 16 15 10 14 13 12 4 3 30 1 General Maintenance Tool Kit (GMTK) Drawer layout COMP # DESCRIPTION BRAND PART NO. WARRANTY 1-3/16 Drawer,
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. SPOILER (LOW) 2005 ACCORD 4-DOOR AII 27503 Issue Date AUG 2004 PARTS LIST Trunk spoiler Right trunk spring (marked green) Left trunk spring
Tools with Character!
Tools with Character! 1/2016 PROXXON socket sets manufactured using the most modern production technology in the world s largest socket and driving elements factory. The ratchet the key item : Made from
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory REMOTE CONTROL Application 2012 CR-V Publications No. AII 12085 Issue Date DEC 2011 PARTS LIST Remote Control Engine Starter Unit Kit P/N 08E91-E22-101A Accessory User
GENUINE MUD FLAP (FRONT)
GENUINE MUD FLAP (FRONT) INSTALLATION AND USER S INSTRUCTIONS Thank you for purchasing a Genuine Mazda Accessory. Before removal and installation, be sure to thoroughly read these instructions. Please
1000 V INSULATED SCREWDRIVER RANGE
1000 V INSULATED NEW! SCREWDRIVER RANGE Individually tested, VDE insulation up to 1000 V, according to EN 60900/IEC 60900 Large diameter handle for excellent torque transmission and grip. Ergonomic handle
MINI COOPER HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT DESIGNED FOR USE WITH BALL MOUNT # D-19 / 45519
10/8/2012 PAGE 1 of 6 ITEM 1 QTY 8 Parts List PART NUMBER DESCRIPTION 3/8" CONICAL TOOTHED WASHER TOOLS REQUIRED RATCHET TORQUE WRENCH 12" EXTENSION 12mm SOCKET 8mm SOCKET OFFSET SCREWDRIVER FLAT BLADE
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory REMOTE CONTROL Application 2011 ODYSSEY (EXCEPT LX) Publications No. AII 43923 Issue Date SEP 2010 PARTS LIST Remote Control Engine Starter Unit Kit P/N 08E91-E22-101A
Go-ped ESR750 / ESR750EX Rear Brake Installation Instructions
Go-ped ESR750 / ESR750EX Rear Brake Installation Instructions This kit provides all the parts you need to install a rear brake on your ESR750 or ESR750EX. It will not work on an ESR Sport, or other Go-ped
packaging style guide version 3.0
packaging style guide version 3.0 contents software requirements logo & usage... 2 tolerances... 3 colours... 4 main elements... 5 typography... 6 principles... 7 proportions... 8 typesetting - grammar...
HAND TOOLS GUARANTEED TO PERFORM. Trusted by Professionals Since
GUARANTEED TO PERFORM Trusted by Professionals Since 1977 www.sunextools.com SUNEX TOOLS WARRANTY PROGRAM Sunex Tools Sockets, Wrenches, Screwdrivers, Specialty Tools, and Vises carry a LIFETIME warranty
ROAD MASTER ACTIVE SUSPENSION These Fitting Instructions must be read and followed step by step for the to II owing kits.
ROAD MASTER ACTIVE SUSPENSION These Fitting Instructions must be read and followed step by step for the to II owing kits. Item# 4611-TD FOR 007- CURRENT TOYOTA TUNDRA --------------------------------------------------------------IM
WRENCHES TECHNICAL INFORMATION
Britool wrench features WRENHES EHNI INFORMION Stress relief drive on rings promotes higher torque loads hin wall rings ease of access Special formulation steel increases load carrying capabilities rop
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory REMOTE CONTROL Application 2012 ODYSSEY (EXCEPT LX) Publications No. AII 46745 Issue Date SEP 2011 PARTS LIST Remote Control Engine Starter Unit Kit P/N 08E91-E22-101A
SOFT FOAM INSERTS. Soft Foam Inserts.
SOFT FOAM INSERTS > Socket tool sets > Double open-end wrench sets > Combination wrench sets > Ratcheting combination wrench sets > Screwdriver sets > Pliers sets > Hook and scraper sets > VDE Tool sets
Ratchets and Accessories
Strength and Reliability A Level of Confidence AmPro offers a variety of state-of-the-art ratchet models, which prevents damage from dust and moisture. All ratchets are professional quality made of Chrome
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. SPOILER (DECK LID) ACCORD 4-DOOR AII 24063 Issue Date AUG 2002 PARTS LIST Trunk spoiler Right trunk spring (marked green) Left trunk spring
1/4" SOCKET WRENCH SETS
1/4" SOCKET WRENCH SETS All components are forged from high quality Chrome Vanadium steel Torque-Drive sockets contact the fastener on the sides rather than the corners, reducing corner rounding and allowing
Spring Special. 1 October - 30 November 2012 GLFS0012 R R GLFS0008. Micro - Tec
Spring Special *All Prices Incl VAT* E&OE 1 October - 30 November 2012 MSS9600 61pc Tool Set R2 502.00 1/2 Socket Sizes (12 Point): 8 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 32 1/2 Reversible Ratchet