Used correctly, it s surprising what a small splitter will do but.

Transcription

1 1 Zz

2 Contents Disclaimer: The following information and prices are for indication only and are not binding. Quotations and exact specifications are available on request. FOREST MASTER Mulching Flails... 4 SKIDDING GRAPPLES... 5 TIMBER GRABS and Site Clearance Grabs for Loaders etc... 6 STROKE HARVESTERS, FELLING HEADS / ACCUMULATOR FELLING HEADS... 7 KINETIC 8x8 Forwarder... 8 ATV / UTV FORESTRY EQUIPMENT (Pictures)... 9 ATV / UTV FORESTRY EQUIPMENT... 9 SMALL FORESTRY TRAILERS WITH CRANES FORESTRY TRAILERS & CRANES SETS LARGE FORESTRY TRAILERS (Select crane from list)... Error! Bookmark not defined. FORESTRY CRANES (Select trailer from trailer list, cranes can be ordered separately) LINKAGE MOUNTED WINCHES WITH MANUAL CONTROL LINKAGE MOUNTED WINCHES WITH ELECTRO-HYDRAULIC CONTROL SINGLE DRUM WINCHES & DOUBLE Drum WINCHES HYDRAULIC GEAR DRIVEN WINCHES Uniforest Savoy Domestic Log Splitters Ton Vertical Log Splitter Ton Vertical Log splitter ton Vertical splitters UF Titanium Log Splitters, 13, 16, 20, 25 Ton vertical ARB Splitter... Error! Bookmark not defined. Horizontal Log splitters: 14, 18, 23, 30, 40 & 50 Ton Horizontal Log Splitters ton HORIZONTAL LOG SPLITTERS A ton Horizontal log splitters Contractor SK15 / 20 / 24 / 30 & Pro 33 / Split-Fire Splitters Ton Vertical trailed splitter Hydraulic Cone Splitters Logging Saw Benches Band Saws Log Conveyors... Error! Bookmark not defined. WP36 Firewood Processor (Pictures) WP30/36 Firewood Processor UNIFOREST TITAN PROCESSOR Billet Processors Python Billet Bundler

3 Used correctly, it s surprising what a small splitter will do but. The force needed to split wood varies a lot, so when choosing a log splitter consider the following. It s not all about price but more about making the job as easy and quick as your budget will allow. Vertical Log Splitters are usually used when you can lift the wood by hand and put it on a waist height table for splitting into logs. To make big wood easier to handle and lift onto a table, it is often cut into rings. Some of the vertical models have an adjustable table height that can also be removed so you can split long wood up to 110cm high. If it is a big diameter, the ton models can have a lifting arm to stand the log up. Horizontal Log Splitters are mainly designed for what we call Billeting, IE you take a 100cm log and split it into long Billets that you then season (dry).when the Billets are seasoned, you can cut them to the log length you want, hopefully with one of our saw benches, or saws and conveyors. However, you can place a number of rings in a row on a horizontal splitter and push the row through the knife. To do this, the rings must be cut parallel so they don t fly off whilst splitting! Horizontal log splitters can be specially ordered to take the log length the customer wants. For example, the A22OR could be with a 2 or 2.5 meter log length. Again, the Billet can then be cut to log length on a saw. Using this method you can also take large diameter timber and make it into Billets for a firewood processor. For example, if the firewood processor takes a maximum diameter of 30cm timber, you can use something like a 30 Ton horizontal log splitter with 2 meter log length to make four 2 meter long Billets that can then be put through the 30cm firewood processor. To help you decide what size log splitter you need, the following guide may help. It is based on splitting green, average / good timber, the maximum length the splitter will take and with a single knife into two pieces. They will of course split bigger diameter timber but this is a general guide that will make sure you are happy with your log splitter even if you have bad timber: Vertical splitters 5 ton = 12cm diameter & 35cm long. 8 ton = 20cm diameter & 55cm long. 9 ton = 25cm diameter & 56cm long. 11 ton = 30cm diameter & 70cm long ton = 30-40cm diameter & 110cm long ton = 40-50cm diameter & 110cm long. 25 ton = 50-80cm diameter & 110cm long. Horizontal splitters 12 ton = 30-40cm diameter & cm long ton = 40-60cm diameter & cm long 22 ton = 60-80cm diameter & cm long 30 ton = cm diameter & cm long 40 ton = cm diameter & cm long 60 ton = cm diameter & cm long 100 ton = cm diameter & cm long If the timber is very bad with lots of knots and twists, or is seasoned, then you will need more power for the diameter. Especially if it is seasoned hard wood such as Oak, as this becomes very hard to split. When a vertical splitter is available with a 4 way knife, you should consider the following: 1) The 4 way is for splitting one log / piece of timber into four equal logs. 2) The timber should be nice and straight with no big knots 3) The timber should be straight grained and not all twisted. So if the 4 way knife is for a 12 ton machine, then the maximum diameter is 30cm. Information we need to offer advice on which log splitter is best for you: Is it for commercial or private use? What timber, i.e. hardwood or softwood? What diameter? What length do you usually cut your logs to? Are you interested in electric, petrol engine, tractor powered by PTO or tractor powered by the tractor hydraulics? If it is a tractor one, what model & horse power is it? If it is electric do you have single phase or 3 phase electric at the place it is being used? 3

4 Forest-Master Mulching Flails HEAVY FORESTRY MOWER WITH CAGE ROTOR Mechanically driven by the PTO of the tractor (540 RPM or 1000 RPM to be specified upon order) PTO shaft with free wheel included. Cuts material up to 10cm / 4 inches in diameter. Mounted on the front or rear 3-point hitch Cut width Hammers Weight Kg 350 VD 110 V (on demand) (30hp+) 1.10 m , VD 150 MV (mechanical side shift) (40hp+) 1.50 m , VD 180 M (heavy gearbox) (70hp+) 1.80 m ,00 Optional: Price Height adjustable roll for VD 150 and VD , Hydraulic side shift for VD 150 MV Height adjustable roll for VD 180 Hydraulic side shift for VD 180 M ,00 580, Hydraulic heavy rear adjustable hood with 2 cylinders (tractor hydraulics) + stronger housing (all models) 1, Mechanically adjustable bull bar with reinforced mowing head (all models) Driven with 1000 RPM instead of 540 RPM Front mounted, instead of rear mounted Additional rubber protection together with the chain protection Hydraulic rear hood, adjustable bull bar, reinforced mowing head 1, ,00 170,00 405,00 3,

5 SKIDDING GRAPPLES RRZ110 Skidding grapple. Heavy Duty, max tip to tip opening 1100 mm, minimum timber 1,370 diameter 100mm, gripping force 2500 kg free swinging, weighs 140 Kg, COWINCH-M Hydraulic winch mounted on above, 25m X 6mm cable, 445Kg pull, requires 1 1,100 D/A valve. RRZ165 Skidding grapple. Heavy Duty, max tip to tip opening 1650 mm, minimum timber 1,870 diameter 100mm, gripping force 5000 kg free swinging, weighs 290 Kg, UF1300F-2DA Loader grapple. Heavy Duty, opening cm, 360 Hydraulic rotator, requires 2 DA service only, weighs 216 Kg, 2,400 UF1300F Loader grapple. Heavy Duty, opening cm, 360 Hydraulic rotator, 12 volt diverter valve requires 1 DA service only, weighs 216 Kg, 2,600 UF1800F linkage grapple. Heavy Duty, opening cm, manual spring return rotator, requires 1 DA service, weighs 300 Kg 2,400 UF1800F-2DA Loader / linkage grapple. Heavy Duty, opening cm, 360 Hydraulic rotator, requires 2 DA service, weighs 343 Kg 2,900 UF1800F-1DA Loader / linkage grapple. Heavy Duty, opening cm, 360 Hydraulic rotator, 12vlt diverter, requires 1 DA service, weighs 343 Kg 3,100 UFSFS1800 Hydraulic winch with radio remote control. Cable size TBA 2,000 UFPRO 1 Skidding grapple. Heavy Duty, tip to tip opening 180cm, 9.5 ton gripping force, 60cm manual extension, 45 degree Hydraulic left / right slew, weighs 365 Kg, 2,600 UFPRO 2 Skidding grapple. As above but with hydraulic extension as well as Hydraulic left / right slew, weighs 380 Kg, 2,900 UFPRO 3 Skidding grapple. As above but complete with control valves and levers, and hydraulic rotator, weighs 405 Kg, 3,800 UFSFS1800 Hydraulic winch & radio remote control. 30m X 8mm cable,1800kg pull 2,140 5

6 Timber grabs and Site Clearance Grabs for Loaders etc A Loader grab DUTK105/Euro, timber gran with hydraulic top beak, Euro quick hitch standard, other hitch options available. 235Kg. 1,350 B Pallet fork Grab R , sliding tines, removable hydraulic top beak (beak also available separately), Euro quick hitch standard, other hitch options available. 1,250 B Pallet fork Beak R , hydraulic beak with mounting & hoses, from above.,650 C Forest blade Grab R , with hydraulic top beak, Euro quick hitch standard, other hitch options available. 235Kg 1,250 D ABLG050 Grab. Twin hydraulic beaks. Tractor loader / skid steer. 380kg ABLG105 Grab. Twin hydraulic beaks. Tele-handlers, 450Kg. ABLG405 Grab. Twin hydraulic beaks. Loading Shovels 550Kg Mtr wide Mtr wide Mtr wide. 2,150 2,250 3,500 E ABWR5250 Grab. Suitable for Tele-handlers, Loading Shovels. ABWR6260 Grab. ABWR7270 Grab. ABWR8280 Grab. Grabs and Rotators for Cranes and Excavators 1.52 Mtr wide Mtr wide Mtr wide Mtr wide 6,450 6,700 7,100 7,350 Standard grab Combi Grab Clamshell Grabs prices exclude hydraulic hoses and rotator pin. Model Weight A B C D E F G Price CO-grab-0.08+CO-ROT tba tba tba tba tba TECTHL30 Grab TETCTHLS30 Grab UFGR1100 PRO TETCHLS30 Combi TECTP120 Grab TECTP120 Combi ,288 UFGR1300 PRO ,050 UFGR1500 PRO ,150 TECTP155 Grab ,507 UFGR ,250 COBUCKET50L NA NA 605 NA 396,950 COBUCKET60L NA NA 605 NA 496 1,050 CO-ROTATOR tba 1 ton rotator plus 350 UFGR30PF tba 3 ton rotator plus 4 bolt flange adaptor 500 UFGR465 tba 4.5 ton rotator with 4 bolt fixing 595 UFGR603DSB tba 6 ton rotator with 6 bolt fixing 995 Rotator pin and hoses from grab to rotator 90 6

7 STROKE HARVESTERS, FELLING HEADS / ACCUMULATOR FELLING HEADS PRODUCT MODEL RETAIL Stroke harvesters Naarva S23 8,480 Naarva S23C 12,330 Naarva S25 11,700 Felling heads Naarva K24 6,160 Naarva K25 7,900 Naarva K32 14,250 Naarva KV38 13,700 Energy wood heads Naarva E24 7,450 Naarva E25 12,150 Naarva E25 with quick 28 cm guillotine 13,100 Naarva E32 23,000 Naarva EV38 15,100 Feeding energy Naarva EF28 39,400 wood head Naarva automation system 4,150 Up-rooters Naarva P Naarva P05G Naarva P16 5,180 Other products Mounding bucket 5,080 Pole planting bucket 5,080 Control systems Automatic control with relay 1,060 Automatic control with display 1,650 Bluetooth measuring device 2,500 Bluetooth device with diameter sensor 2,888 Radio control 1,550 Radio control, mini buttons 2,100 Radio control, buttons in aluminium casing 2,150 PLC control 1,450 PLC control with mini-buttons / joystick 1,750 Miscellaneous Firewood rack, solid 1,250 Firewood rack, pipe model 1,750 Quick coupling for Naarva, small models 590 Quick coupling for Naarva, large models 710 Steel cover for 5 pole plug 90 S23 guillotine S23C saw unit Rotators and links Baltrotors GR46 rotator 750 BR10 swing damper 260 Baltrotors GR55M rotator 820 BR10 A swing damper 260 Baltrotors GR603 DB rotator 1,160 BR 22 KS swing damper 1,120 Baltrotors HR 10SM 2,150 BR 32 KS swing damper 1,320 Extension booms JP23 boom without coupling 1,600 JP25 boom without coupling 1,600 JP23/JP25 extension boom package with rotator and 3,150 Accumulating grippers E24 accumulating grippers 1,600 E25 accumulating grippers 3,860 7

8 Kinetic 8x8 Forwarder Kinetic T8 Forwarder Maximum load Engine (Yanmar diesel) Axel configuration 3000 Kg 26Hp 8x8 Transmission 4 : 1 Weight Without crane 1790Kg Crane CO 470 Crane reach 4.7M Crane eight (kg) 344 PRODUCT PRICE * Kinetic 8x8 diesel with Country crane ,000 ON / OFF control valve 395 Radio winch for crane 470 1,046 Working LED lights on crane 398 Tipping dump body with tailgate 2,982 Clamshell bucket 60L 621 Reverse drive and braking (for driving machine when seated in crane working position) 1,059 Steel band tracks (1pair) 1,428 Loading area extension 80cm 347 Additional hydraulic outlet 308 Extension bolster pins (1pair) 45 Calix engine heater 298 ( Saw holder 89 Front windscreen with wiper 400 Clear plastic, zip in, roll down side panels 400 Full cab kit. POA 8

9 ATV / UTV FORESTRY EQUIPMENT ATV / UTV FORESTRY EQUIPMENT UT22181 Skidding arch with unique lift and tension system.,710 UT22184 Skidding arch complete with rear axle carrier to keep tree off the ground 1,150 COT COT Folding Chassis. Trailer, 1500Kg capacity, heardboard, 2 pairs (4) bolsters. 22/11R8 tyres on rocking beam axle, 3.3M crane with 0.08 grab & rotator, Valve with Joystick levers for crane + 5,700 single levers for legs etc. Optional: 1m trailer length with pair of bolsters and sockets: 450 COT Kg trailer upgrade.,500 Trailer, 1500Kg capacity, headboard, 2 pairs (4) bolsters. 22/11R8 tyres on rocking beam axle, 3.3M crane + 0.8M extension, with 0.08 grab & rotator, Valve with Joystick levers 6,700 for crane + single levers for legs etc. Optional: 1m trailer length with pair of bolsters and sockets: 450 COT Kg trailer upgrade.,500 Optional UK built folding ladder chassis with adjustable axle position. 1,500 COWINCH Radio remote control winch for crane. 25m X 6mm cable, 445Kg pull, 30 m/min speed. Includes manual valve operation. 1,400 COPOWER 5.5hp petrol engine power pack for mounting on ATV front rack 1,430 COT152WD Hydraulic 2 wheel drive kit, 5 km/h engaged, maximum 40 km/h disengaged, 12vlt 1,980 COTTRACK Electric Band tracks on / off for control use with or without hydraulic 2 wheel drive 1,040 COT154WD Hydraulic 4 wheel drive kit, 5 km/h engaged, 12vlt Electric on / off control 2,280 COAUGER Post hole auger for crane POA COCLAM 50L 50L Clam shell bucket for crane,930 9

10 SMALL FORESTRY TRAILERS WITH CRANES COT COT Folding Chassis. COT COT COT COT Kg, capacity single beam trailer, head board, 3 pairs (6) bolsters. 10 / AW tyres. A type hydraulic legs & Headboard. 322Kg crane 3.8 reach, 360 rotation, 510Kg at full reach, joystick valve block, grab, rotator. Optional: 300/65-12 wheels 350. Brakes on 2 wheels Kg, capacity single beam trailer, head board, 3 pairs (6) bolsters. 10 / AW tyres. A type hydraulic legs & Headboard. 344Kg crane Mt extension, 360 rotation, 370Kg at full reach, joystick valve block, grab, rotator. Optional: 300/65-12 wheels 350. Brakes on 2 wheels ,320 8,300 COT30 optional UK built folding ladder chassis with adjustable axle position. 1, Kg, capacity single beam trailer, head board, 3 pairs (6) bolsters / AW tyres. A type hydraulic legs & Headboard. 350Kg 3.9M reach crane, 360 rotation, 510g at full reach, joystick valve block, grab, rotator Optional: 400/ wheels 440. Brakes on 2 wheels Kg, capacity single beam trailer, head board, 3 pairs (6) bolsters / AW tyres. A type hydraulic legs & Headboard. 373Kg crane Mt extension, 360 rotation, 370Kg at full reach, joystick valve block, grab, rotator. 8,500 9,500 Optional: 400/ wheels 440. Brakes on 2 wheels 675. Optional Extra pair bolsters and sockets,330 Optional 1-meter extension with extra bolsters and sockets,440 Optional Rear light frame, number plate lights and folding outer lights,300 Optional Operators platform on drawbar,330 COT302WD Hydraulic 2-wheel drive kit, 5 km/h engaged, maximum 40 km/h disengaged, 12vlt Electric on / off control 2,470 10

11 LARGE FORESTRY TRAILERS & CRANES. ON8T ON52 Options 7000Kg*, capacity single beam trailer, head board, 3 pairs (6) bolsters. 300 / ply AW tyres. 530Kg crane, 5.2 Mt, 4 slew cylinders, 480Kg** at full reach. B61 valve: 2 Joystick 9,800 (one twist) + 2 levers. 30Kn rotator. G16 timber grab. Gullwing legs. 2 year standard warranty, 1 year for contractor use. Trailer: 400/ Brakes inside two wheels 435 or 4 wheels 835. Extra pair bolsters 280. Steering drawbar 500. Platform 275. Folding lights & number plate holder 340 Crane: PTO driven Hydraulic pumps: 60L 700, 80L 780. Hydraulic tanks 60L 360. Valve with 2 Joystick, one with twist and 2 individual levers. ON12T-D ON67S ON12T-D ON72 ON14T-D ON67S ON14T-D ON72 ON17T-D ON67S ON17T-D ON72 ON17T-D ON83T 10,000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) bolsters, brakes inside 2 wheels. 400/ tyres. 880Kg crane, 6.7 Mt (1 ext), 436Kg** at full reach. B9 50ltr valve: 2 Joystick (two twist) + 2 levers. 30Kn rotator. G16 timber grab. A type legs. 15,000 10,000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) bolsters, brakes inside 2 wheels. 400/ tyres. 18,300 1,140Kg crane, 7.2 Mt (1 ext), 700Kg** at full reach. B91 80ltr valve: 2 Joystick (two twist) + 2 levers. 40Kn rotator. G21 timber grab. A type legs Crane upgrade, 705kg at 7.4M full reach. B91 80ltr valve. 1,700 12,000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) bolsters, brakes inside 2 wheels. 400/ tyres. 500/50-17 tyres 15, Kg crane, 6.7 Mt (1 ext), 436Kg** at full reach. B9 50ltr valve: 2 Joystick (two twist) + 2 levers. 30Kn rotator. G16 timber grab. A type legs. 12,000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) bolsters, brakes inside 2 wheels. 400/ tyres. 500/50-17 tyres 18, Kg crane, 7.2 Mt (1 ext), 700Kg** at full reach. B91 80lt valve: 2 Joystick (two twist) + 2 levers. 40Kn rotator. G21 timber grab. A type legs Crane upgrade, 705kg at 7.4M full reach. B91 80ltr valve. 1, Crane upgrade, 540Kg at 8.3M full reach. B91 80ltr valve. 1, Crane upgrade, 530kg at 8.6M full reach. B91 80ltr valve. 2,700 14,000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) bolsters, brakes inside 4 wheels. 500/50-17 tyres 18, Kg crane, 6.7 Mt (1 ext), 436Kg** at full reach. B9 80ltr valve: 2 Joystick (two twist) + 2 levers. 30Kn rotator. G16 timber grab. A type legs. 14,000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) bolsters, brakes inside 4 wheels. 500/50-17 tyres 1140Kg crane, 7.2 Mt (1 ext), 700Kg** at full reach. B91 80ltr valve: 2 Joystick (two twist) + 2 levers. 40Kn rotator. G21 timber grab. A type legs. 21, Crane upgrade, 705kg at 7.4M full reach. B91 80ltr valve. 1,500 14,000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) bolsters, brakes inside 4 wheels. 500/50-17 tyres 1230Kg crane, 8.3 Mt (2 ext), 540Kg** at full reach. B91 80ltr valve: 2 Joystick (two twist) + 2 levers. 40Kn rotator. G23 timber grab. 23, Crane upgrade, 530Kg at 8.6M full reach. B91 80ltr valve. 1,700 ON17T-D Long trailer upgrade, 14,000Kg* capacity trailer, 5.3m long load area, steering drawbar, 1,200 Long headboard, 4 pairs (8) bolsters, 12 sockets, brakes inside 4 wheels. 550/50-17 tyres. Trailer: 520/50-17 tyres. 550/ tyres Hyd Brakes on four wheels 390. Air brakes on 4 wheels Frame extension 275. Extra pair bolsters 300. Platform 275. Folding lights 250 Cranes: PTO driven Hydraulic pumps: 60L 700, 80L 780. Options Hydraulic tanks: 60L (7-10T) L (10-12T) L (12-14T) 475 Valves: Electric on/off joysticks, Pilot operated joysticks with on/off. Proportional with mini electric joysticks for armrests. Radio remote control with belt mounted controls. * Capacity of trailer excludes crane weight which is stated in details above. ** excludes weight of grab and rotator which varies between Kg. 11

12 FORESTRY TRAILERS ON THEIR OWN. COT Kg capacity, headboard, 2 pairs (4) bolsters. 22/11R8 tyres. Optional: 1m trailer length with pair of bolsters and sockets: 450 1,500 COT Kg capacity, headboard, 2 pairs (4) bolsters. 22/11R8 tyres. Optional: 1m trailer length with pair of bolsters and sockets: 450 2,100 COT Kg, capacity single beam trailer, head board, 3 pairs (6) bolsters. 10 / AW tyres. Optional: 300/65-12 wheels 350. Brakes on 2 wheels ,500 Folding Chassis. Optional COT15-30 UK built folding ladder chassis, adjustable axle position. 1,500 COT Kg, capacity single beam trailer, head board, 3 pairs (6) bolsters / AW tyres. Optional: 400/ wheels 440. Brakes on 2 wheels ,200 COT Kg, capacity single beam trailer, head board, 3 pairs (6) bolsters / AW tyres. Optional: 400/ wheels 440. Brakes on 2 wheels ,500 ON8T 7000Kg*, capacity single beam, head board, 3 pairs (6) bolsters. 300 / ply 3,700 ON12T-D AW 10,000Kg* tyres. capacity ladder chassis, steering drawbar, headboard, 4 pairs (8) bolsters, brakes inside 2 wheels. 400/ tyres. 6,800 ON14T-D 12,000Kg* capacity ladder chassis, steering drawbar, headboard, 4 pairs (8) bolsters, brakes inside 2 wheels. 400/ tyres. 500/50-17 tyres. 7,500 ON17T-D 14,000Kg* capacity ladder chassis, steering drawbar, headboard, 4 pairs (8) bolsters, brakes inside 4 wheels. 500/50-17 tyres. 10,200 ON14T-D 14,000Kg* capacity trailer, 5.3m long load area, steering drawbar, headboard, 4 pairs Long (8) bolsters, 12 sockets, brakes inside 4 wheels. 550/50-17 tyres. 11,400 FORESTRY CRANES ON THEIR OWN. All cranes come with joystick controls, grab & rotator. Lift capacities exclude grab & rotator CO Kg crane, 3.3M reach, 0.08 grab & rotator, Valve, Joystick levers for crane + single levers for legs etc. Hyd folding legs. 4,300 CO Kg crane, 4.1M reach + 0.8M extension, 0.08 grab & rotator, Valve, Joystick levers for crane + single levers for legs etc. Hyd folding legs. 5,150 CO Kg crane, 3.8M reach, 360 rotation, 510Kg at full reach, Valve, Joystick levers for crane + single levers for legs etc. Hyd folding legs or A legs. 5,150 CO Kg crane, 3.9M reach, 360 rotation, 510Kg at full reach, Valve, Joystick levers for crane + single levers for legs etc. Hyd folding legs or A legs. 5,650 CO Kg crane Mt extension, 360 rotation, 370Kg at full reach, joystick valve block, grab, rotator. Valve, Joystick levers for crane + single levers for 6,100 legs etc. Hyd folding legs or A legs. CO Kg crane M extension, 370Kg at full reach, joystick valve block, grab, rotator. Valve, Joystick levers for crane + single levers for legs etc. Hyd 6,700 A legs. ON52 530Kg crane, 5.2 Mt, 4 slew cylinders, 480Kg** at full reach. B61 valve: 2 Joystick (one twist) + 2 levers. 30Kn rotator. G16 timber grab. Excludes legs 6,100 ON67S 880Kg crane, 6.7 Mt (1 ext), 436Kg** at full reach. B9 50ltr valve: 2 Joystick (two twist) + 2 levers. 30Kn rotator. G16 timber grab. Excludes legs. 8,200 ON Kg crane, 7.2 Mt (1 ext), 700Kg** at full reach. B91 80ltr valve: 2 Joystick (two twist) + 2 levers. 40Kn rotator. G21 timber grab. Excludes legs. 11,600 ON Kg crane, 7.4 Mt (1 ext), 705Kg** at full reach. B91 80ltr valve: 2 Joystick + 4 levers. 40Kn rotator. G23 timber grab. Excludes legs. 13,300 ON Kg crane, 8.3 Mt (2 ext), 540Kg** at full reach. B91 80ltr valve: 2 Joystick + 4 levers. 40Kn rotator. G23 timber grab. Excludes legs. 13,400 ON Kg crane, 8.6 Mt (2 ext), 530Kg** at full reach. B91 80ltr valve: 2 Joystick + 4 levers. 40Kn rotator. G23 timber grab. Excludes legs. 14,500 ** excludes weight of grab and rotator which varies between Kg ON Crane options: G21, G23, G23E grabs. Electric on/off joysticks, Pilot operated joysticks with on/off. Proportional with mini electric joysticks for armrests. Radio remote control with belt mounted controls. PTO driven Hydraulic pumps: 60L 700, 80L 780. Hydraulic tanks: 60L (7-10T) L (10-12T) L (12-14T)

13 LINKAGE MOUNTED WINCHES WITH MANUAL CONTROL WINCHES SUPPLIED WITH SMOOTH DOUBLE ROLLED CABLE FOR SMOOTHER WINDING ONTO DRUM, LESS FRICTION & EASIER HANDS Model Description Retail UF30M 3 Ton, top pulley, 50 M of 9mm cable, PTO shaft. 1,600 UF35M 3.5 Ton, top & bottom pulley, 70 M of 9mm cable, PTO shaft. 1,700 UF40 Eco 4 ton, top pulley, 60M of 10 cable, PTO shaft. 1,700 UF40E 4 Ton, top & bottom pulley, tow hitch, 70 M of 10mm cable, PTO shaft. 1,980 UF45M 4.5 Ton, top & bottom pulley, tow hitch,70 M of 11mm smooth cable, PTO shaft. 2,240 UF50Eco 5 Ton, top & bottom pulley, 60 M of 10mm cable, PTO shaft. 1,850 UF50E 5 Ton, top & bottom pulley, tow hitch, 70 M of 11mm cable, PTO shaft. 2,240 UF55M 5.5 Ton, top & bottom pulley, tow hitch, 70 M of 11mm smooth cable, PTO shaft. 2,500 UF65M 6.5 Ton, top & bottom pulley, tow hitch, 80 M of 12mm smooth cable, PTO shaft 3,750 UF85M 8.5 Ton, top & bottom pulley, tow hitch, 90 M of 13mm smooth cable, PTO shaft 4,150 LINKAGE MOUNTED WINCHES WITH ELECTRO-HYDRAULIC CONTROL WINCHES SUPPLIED WITH SMOOTH DOUBLE ROLLED CABLE FOR SMOOTHER WINDING ONTO DRUM, LESS FRICTION & EASIER HANDS Model Description Retail UF40EHPro 4 Ton, top & bottom, 70 M of 10mm smooth cable, PTO shaft. 3,300 UF40EHPro1 As above but with hydraulic cable unwinding. 4,500 UF45H 4.5 Ton, top & bottom pulley, tow hitch, 70 M of 10mm smooth cable, PTO shaft. 3,500 UF50EHPro 5 Ton, top & bottom pulley, tow hitch, 70 M of 11mm smooth cable, PTO shaft. 3,550 UF50EHPro1 As above + variable speed hydraulic cable unwinding with PRB 4,400 UF55H 5.5 Ton, top & bottom pulley, tow hitch, 70 M of 10mm smooth cable, PTO shaft. 3,600 UF55HW As above but 180cm wide 4,000 UF55HPro As above but 160cm wide & with hydraulic cable unwinding. 4,600 UF55HWPro As above but 180cm wide & with hydraulic cable unwinding. 4,800 UF60EH 6 Ton, top & bottom pulley, tow hitch, 80 M of 12mm smooth cable, PTO shaft. 4,800 UF60EHPro1 As above but with hydraulic cable unwinding. 5,700 UF65H 6.5 Ton, top & bottom pulley, tow hitch, 80 M of 12mm smooth cable, PTO shaft. 4,900 UF65HW As above but 180cm wide butt plate. 5,200 UF65HPro As above but with hydraulic cable unwinding. 6,000 Dual Mounting Front and rear mounting upgrade for any UF65H / UF65HPRO winch.,400 UF80EH 8 Ton, top & bottom pulley, tow hitch, 90 M of 13mm smooth cable, PTO shaft. 5,300 UF80EHPro As above but with hydraulic cable unwinding. 6,200 UF85H 8.5 Ton, as above but hydraulic control with wander lead 5,500 UF85HW As above but with 200cm butt plate. 5,800 UF85HPro As above but with hydraulic cable unwinding. 6,600 UF85HPro+ As above but with hydraulic hinged lower butt plate 7,100 Auto Stop Cable automatically stops when the cable end reaches the winch head on winch in,120 13

14 Radio Remote Controls for Electro-Hydraulic winches T60-70 range of remote controls use standard not rechargeable batteries Retail T60 Radio remote, 180mt range, 6 channel (in-out. Stop, throttle control*),510 T70-1 Radio remote, 180mt range, 8 channel (in-out, stop, throttle control*, Eng stop / start*),750 T80 range of remote control is a rechargeable battery T80-1 Radio remote, 180mt range, 8 channel (in-out, stop, horn, throttle*, Eng stop-start*),950 FA range of remote control are rechargeable with the optional recharging units FA5D1 Radio remote, 500mt range, 8 channel (in-out, stop, throttle control* + Eng stop / start*) 1,250 FA5D1+ With electronic engine rev control function 1,450 FA5D1 with Anti Tipp System 1,600 FA mains quick charger SLG-250,160 FA Cigarette lighter charger MLG-7/70-12v/2424, 45 *Engine throttle control unit for manual throttles, not electronic throttles. (requires relays),225 Accessories for Linkage Mounted Winches. Cable end & wedge (includes basic choker eye). T3 small cable / T1 large cable 25 / 28 Simple Choker slider 80 Grade Swivel Choker slider 80 Grade Swivel Choker slider 100 grade Choker slider with pulley wheel for running on cable M Choker chain, 80 Grade, 7mm round M Choker chain, 80 Grade, 8mm round M Choker chain, 80 Grade, 7mm square M Choker chain, 100 Grade, 7mm square M Choker chain, 100 Grade, 8mm square M Choker chain, 100 Grade, 8mm square > 8 Ton Snatch block, side entry > 12 Ton Snatch block, side entry > 18 Ton Snatch block, side entry mm double flat, smooth cable. 6X25 DIN N/mm2. Per meter mm double flat, smooth cable. 6X25 DIN N/mm2. Per meter mm double flat, smooth cable. 6X25 DIN N/mm2. Per meter mm double flat, smooth cable. 6X25 DIN N/mm2. Per meter mm double flat, smooth cable. 6X25 DIN N/mm2. Per meter mm double flat, smooth cable. 6X25 DIN N/mm2. Per meter

15 Single & Double Drum Standard fitting (excludes cable): Hydraulic cable unwinding (variable speed) Wire guide and pressure cylinder for more even winding on drum Foldable safety guard Properties: Bevel and helical gear drive Highly efficient gear drive minimal oil heating Separate hydraulic systems for the drum and the device for unwinding wire rope Separate drum control on double drum winches Multi-blade clutch constituted of four plates Compact and strong construction, chain saw and fuel tank holder Room for forestry chains and other small forestry equipment on the front side of winch Model 65G G1.92 Pulling force 6.5 ton 6.5 ton 70GK Power 6.8 ton constant 85G G ton 8.5 ton 70GK Power 8.5 ton constant 120G Power 12 ton 2X65G 6.5 ton (per drum) 2X85G 8.5 ton (per drum) **Cable 165/ Mt X MM 140/ Weight (kg) Width) (mm) Power required (HP) Price 8,400 8,600 11,600 10,500 10,700 16,600* 15,500* 14,500 16,200 * 120G Power includes radio remote control. **Cable is extra, choice per meter Smooth cable: 11mm: mm: mm: 4.62 all + vat. T70-1 Radio remote, 180mt range, 8 channel (in-out, stop, throttle control*, Eng stop / start*) vat. T80-1 Radio remote, 180mt range, 8 channel (in-out, stop, horn, throttle*, Eng stop-start*) vat. T80-2 Radio remote, 180mt range, 8 channel (in-out, stop, horn, throttle*, Eng stop-start*) 1,600 + vat. FA5D2 Radio remote, 500mt range, 8 channel (in-out, stop, throttle control* + Eng stop / start*) 1,750 + vat. Additional radio remote control of engine rpm for manual engine throttles vat FA mains quick charger SLG vat. FA Cigarette lighter charger MLG-7/70-12v/ vat. Hydraulic folding butt plate: Single drum: 1.72m or 2.1M vat. Double drum: 1.92m or 2.1M vat. 15

16 HYDRAULIC GEAR DRIVEN WINCHES Pulling force empty cable drum. kn 86 / 85 Pulling force full cable drum. kn 50 Mean cable velocity m/s Length of the cable (standard) Optional cable sizes 13 mm / 80m 13 mm / 90m 12 mm / 105m Recommended tractor power kw (HP) 60 (80) Width mm Depth mm 510 Height mm 600 Weight (without wire rope) kg Operating RPM min Oil pressure bar Model 1 X 85H 2 X 85H 2 X 85HPro Price + vat 9,600 11,000 14,500 Cable is not included Hyd unwind 1,200* 1,200* INCL* * Requires electrical connections / parts which are not supplied. The retail price is for the winch unit only. Fabrication of Butt plate or fitting to the tractor is designed to suit the tractor and is therefore charged additionally. 16

17 Uniforest Savoy Mini Cableway system 17

18 Uniforest Savoy Mini Cableway system BASIC PACKAGE : ,00 Winch 85HS-1,8m without rope, upper, lower station, manual hydraulic pump and remote controls. Rope Ø 14mm: 3,00 /m Rope Ø 8 mm : 1,65 /m Additional equipment to upgrade the basic package: Mid station (shoe): 300,00 / pcs Tensioning device for rope: 430,00 Klem-plate - Screw plate for wire rope: Pulley IF 6000: Tightening belt 10t/20m: /pcs Load belt 6t/3m: /pcs NB. The new Savoy is being launched mid / late 2017 NNB: Price includes delivery but not assembly or training. 18

19 Domestic Log Splitters 6 & 7 ton Domestic log splitter Complete with stand & wheels. Adjustable table. HDTHLS-PLUS 240 volt 13 amp HDTHPLS6TE HDTHPLS7TE HDTHPLS7P 240 volt 13 amp 240 volt 13 amp Briggs & Stratton Engine. TON Max Log mm HP *Includes delivery. Surcharge for Islands & Highlands, POA. Warranty T & C s available on request. Price + vat HDTHLS-PLUS 240vlt electric * HDTHPLS6TE 240vlt Electric * HDTHPLS7TE 240vlt Electric * HDTHPLS7P Petrol engine * 19

20 9 Ton Vertical Log Splitter Vertical log splitter for tractor hydraulics. COLSOV9PI tractor hydraulics TON Max Log HP Price + vat 9+* 550mm na 790 This is not a cheap and cheerful splitter. It has been built to the same high standards of all our splitters and has the following features: Full size cutting wedge. Replaceable Oil-Lite slide bushings on cutting wedge. Two speed controls. Auto return, Full safety guarding etc in compliance with all EC regulstions. * The perforamce depends on the hydraulic pressure and flow avaiable from the tractor. 2500psi will give arond 9 ton of force whilst a flow rate of 25 litre per minute will give a good operating speed.. 20

21 10-11 Ton Vertical Log splitter Complete with wheels. Fixed large table TON COLLASO100PI tractor hydraulics. COLLASO100C tractor PTO COLLASO100EM 240vlt Electric Double pump COLLASO100 Petrol engine. Double pump Max Log Length cm HP Price NA 1, NA 1, , ,750 Adjustable height small table COLLASO100EM-TR Adjustable table 240vlt Electric. Double pump COLLASO100-TR adjustable table Petrol engine. Double pump TON Max Log Length cm HP Price , ,080 OPTIONALS Four way Blade ( 11 ton model only) 95 Quick split wide blade ( 11 ton model only) 80 21

22 12 ton Vertical splitters 2 speed & auto return. Wheels for easy moving. 70cm Table height. Optional Tubular table extension. TON Max Log mm HP Price COLPROFY12PI tractor hydraulics / 1,320 COLPROFY12PC tractor PTO ,540 COLPROFY12EM 240volt electric with double pump ,640 COLPROFY12SB petrol engine ,190 with double pump. Options Road tow IVA trailer etc. for SB log splitter (Code: HAZ-750kg-IVA kit) 1200 Large rubber pneumatic wheels. 150 Large table for big diameter rings. 200 Four-way knife

23 UF Titanium Log Splitters, 13, 16, 20, 25 Ton vertical Model PTO 3 Phase PTO + 3 phase UF11 (10 ton) 1,700 1,950 2,250 UF14 (13 ton) 2,200 2,500 2,800 UF18 (16 ton) 2,600 2,900 3,200 UF23 (21 ton) 2,850 3,100 3,400 UF27 (26 ton) 3,200 3,600 4,000 Extra s UF11 UF14 UF18 UF23 UF27 Two height table with side extension way knife Chainsaw holder Fuel tank holder Hydraulic winch - - 1,150 1,150 1,150 Hydraulic winch with remote control - - 1,350 1,350 1,350 Scissor grab PTO shaft SP SP SP SP SP Specification: 1090mm max log height. Two speed ram (Auto speed on 25T). Auto return knife ram with override stop if you want to stop the knife from returning. Removable table, 56cm standard height, other heights by request. LH side arm, RH timber lifter / side arm. Adjustable knife return stop. 23

24 Horizontal Log splitters: 14, 18, 23, 30, 40 & 50 Ton Adjustable stroke, Automatic return, automatic two speed (18 upwards) 2 way Blade. Tractor hydraulic or PTO. Petrol engines (14 to 23). 240volt (14T) & 380 volt (14 to 50T) NEW OPTIONS Side mounted PTO for crane loading. Remote hydraulic operation from cab. Road tow MS & MS models only 24

25 14 to 23 ton splitting force. 1.2 meter to 2.5 meter stroke. Standard single knife. Petrol engine models have a double hydraulic pump. All others have a single pump. Double pump is extra vat. Model code Drive Ton Log mm Price COSO Pi Pi Hyd ,730 COSO C PTO ,980 COSO ET 3 phase ,320 COSO C+ET PTO / 3 phase ,520 COSO MS Petrol 9hp ,000 COSO C PTO ,400 COSO ET 3 phase ,700 COSO C+ET PTO / 3 phase ,200 COSO MS Petrol 9hp ,700 COSO C PTO ,700 COSO ET 3 phase ,100 COSO C+ET PTO / 3 phase ,400 COSO MS Petrol 9hp ,200 COSO Pi Pi Hyd ,250 COSO C PTO ,500 COSO ET 3 phase ,850 COSO C+ET PTO / 3 phase ,350 COSO MS Petrol 9hp ,800 COSO C PTO ,950 COSO ET 3 phase ,350 COSO C+ET PTO / 3 phase ,400 COSO MS Petrol ,300 COSO Pi PI Hyd ,450 COSO C PTO ,700 COSO ET 3 phase ,100 COSO C+ET PTO / 3 phase ,600 COSO MS Petrol 9hp ,000 COSO C PTO ,150 COSO ET 3 phase ,500 COSO C+ET PTO / 3 phase ,000 COSO MS Petrol ,500 COSO Pi PI Hyd ,450 COSO ET 3 phase ,700 COSO C+ET PTO / 3 phase ,150 COSO MS Petrol ,600 Options: Road tow IVA trailer etc. for MS & MS models only (Code: HAZ-750kg-IVA kit) 1,200 Four way Knife, manual height adjustment:,300 Four way Knife, Hydraulic height adjustment: 1,450 Folding end table to catch split wood:,750 Hydraulic side loading: 1,100 Machine on legs, working height by agreement:,400 Yard tow axle (not sprung), with towing eye.,300 IVA road tow axle and lighting. (Code:HAZ-750KG-IVAKIT-1),850 Remote control via hydraulic ram on control levers:,600 Remote control for splitting & knife: 1,500 Remote control for splitting & knife & side loader: 2,500 25

26 Horizontal Log Splitters ton Hydraulic 2-4 Way Blade, end stabilizer legs and solid axle as standard. Model Drive Ton Log mm Price COSO C PTO ,750 COSO ET 3 phase ,600 COSO C-ET PTO / 3 Phase ,100 COSO C PTO ,700 COSO ET 3 phase ,500 COSO C-ET PTO / 3 phase ,000 COSO C PTO ,900 COSO ET 3 phase ,600 COSO C-ET PTO / 3 phase ,200 COSO C PTO ,900 COSO ET 3 phase COSO C-ET PTO / 3 Phase ,200 COSO C PTO ,500 COSO ET 3 phase ,700 COSO C-ET PTO / 3 phase ,400 COSO C PTO ,100 COSO ET 3 phase ,600 COSO C-ET PTO / 3 phase ,200 COSO C PTO ,600 COSO ET 3 phase ,500 COSO C-ET PTO / 3 Phase ,900 COSO C PTO ,000 COSO ET 3 phase ,600 COSO C-ET PTO / 3 phase ,100 COSO C PTO ,900 COSO ET 3 phase ,700 COSO C-ET PTO / 3 phase ,200 Options: Folding end table to catch split wood:,750 6 Way hydraulic knife: 1,200 Hydraulic side loading: 1,200 Remote control for splitting & knife: 1,500 Remote control for splitting & knife & side loader: 2,500 PTO shafts: SP13154, MM, 47HP:,150 SP13157, MM, 64HP:,210 SP13586, MM, 95HP:,230 26

27 SPECIAL ORDER HORIZONTAL LOG SPLITTERS A ton 27

28 Horizontal log splitters Contractor Pro 33 / 43 Telescopic cylinder for reduced transport width. Hydraulic side loader and hydraulic 2-4 way knife. 33 & to 43 ton splitting force, automatic return and 2/4 way knife Log length capacity 125CM 35 & 45 ton. PRO33 Standard cycle time: 21 seconds. O-14/R-7. PRO33 with regenerative 2-speed valve: 16 seconds. O-9/R-7. Model Ton Log Length mm PRO 33OR1.250C (Hyd adjustable 2/4 blade, log table, hyd loading) ,520 PRO 33OR1.250ET (Hyd adjustable 2/4 blade, log table, hyd loading) ,520 PRO 43OR1.250C (2 speed Hyd adjust 2/4 blade, log table, hyd loading) ,800 PRO 43OR1.250ET (2 speed Hyd adjust 2/4 blade, log table, hyd loading) ,800 HP Price Options 3 Phase electric motor kit to combine with PTO drive 1,800 2 speed Regenerative valve for two speed splitting Pro 33 (standard on PRO Smaller pump for lower hp tractors (will reduce cycle times) way knife 660 Table on 2-4 way knife cross blade 330 PTO shafts for all models PTO shaft, SP13154, MM, 47HP 150 PTO shaft, SP13157, MM, 64HP 210 PTO shaft, SP13586, MM, 95HP

29 Split-Fire Splitters 3 PT Hitch models: (Choice of short or tall top link bracket) Code Product Price ( ) PT PI 16 Ton 2-way knife, 24 logs PT PI 20 Ton 2-way knife, 24 logs 1, PT PI 20 ton way knife, 24 logs 1, PT PI 32 ton 2-way knife, 24 logs 1, PT PI 32 ton 2-way knife, 36 logs 2, PT PI 32 ton way knife, 24 logs 2,150 Petrol engine models on 3 legs: (Excludes axels & Drawbar see options) Code Product Price ( ) 2203SB 16 Ton, 2-way knife, GX200 (5-5.8hp) & pump kit 2, SB 20 Ton, 2-way knife, GX200 (5-5.8hp) & pump kit 2, SB 20 Ton, way knife, GX200 (5-5.8hp) & pump kit 2, SB 32 Ton, 2-way knife, GX270 ( hp & pump kit 3, SB 32 Ton, 2-way knife, GX270 ( hp & pump kit 3, SB 32 Ton, way knife, GX270 ( hp) & pump kit 3,620 Options Price ( ) Extension table on one side in place of existing wing. 250 PTO Kit (new cross bar with tank etc, PTO pump). 1,010 Log Lifter (includes additional DA valve). 615 Yard tow kit*, wheel assembly on solid axle, draw bar. 500 Road two kit**, wheels, lights etc. (Code:HAZ-750KG-IVAKIT-2). 1,200 Honda GX200 (5-5.8hp) Engine, pump, tank & filter kit, if ordered later. 1,150 Honda GX270 ( hp) Engine, pump, tank & filter kit, if ordered later. 1,470 Cat 1 3PT Hitch Upright (16" high) if ordered later. 41 Cat 2 3PT Hitch Upright (24" high) if ordered later. 51 ** Road tow, IVA model for 24 logs. Models for 36 logs the splitter is in line with hitch etc. * Yard tow model for 24 or 36 logs with log loader. 29

30 Model UFBMF14 (13 ton) 13 Ton Vertical trailed splitter Road Tow Honda GX270 engine 4,500 + vat Ufbmf18 (16 ton) 4,950 + vat. 4-way knife 150 Timber lift 150 Specification: 1090mm max log height. Two speed splitting on the control levers. Double hydraulic pump. LH side arm. Adjustable knife return stop. Removable table, 56cm standard height, other heights by request Auto return knife ram with over-ride stop if you want to stop the knife from returning. Hydraulic tilt between transport and work. 30

31 Hydraulic Cone Splitters A To fit onto 360 excavators, Back-hoes, Skid Steers, Loading Shovels, Tractor loaders, Cranes, Forwarding trailers and many other applications. Retail price includes mounting bracket, pins and hoses with blank ends as per picture A above. Type Max Timber size excavator size pressure in Oil flow weight Cone size in in tons bar in Litre in kg mm length diameter in cm in cm M1-4.7 Roli 1, x M1-5.2 Roli 1, x M1-6.2 Roli 1, x M1-10.0Roli 2, x M1-4.7 k 2, x M2-4.7 K 3, x M2-5.2 K 3, x M2-6.2 K 3, x M2-4.7 M x M2-5.2 M x M2-6.2 M x M2-4.7 KS x M2-5.2 KS x M2-6.2 KS x M2-4.7 S x M2-5.2 S x M2-6.2 S x M3-4.7 S x M3-5.2 S x M3-6.2 S x M4-5.2G x M4-6.2G x M1 4.7 Roli. M1 5.2 / 6.2 Roli. M1 10 Roli. M1 4.7 / 5.2 / 6.2 K or M. M2 4.7 / 5.2 / 6.2 KS: M2 4.7 / 5.2 / 6.2 S. M3 4.7 / 5.2 / 6.2 S. M4 5.2 / 6.2 G. From: 2,600 + Vat. From: 2,800 + Vat. From: 3,980 + Vat. From: 8,700 + Vat. From: 9,845 + Vat. From: 10,460 + Vat. From: 11,720 + Vat. From: 16,000 + Vat. Hardened Cone for M2 and M3 models From; 1,000 60,70,80,100,120,152,229,305,457mm augers From: 965-1,495. Auger 120cm extension 640. Adaptor for auger mounting (not req for Roli) 1,495 31

32 Logging Saw Benches Rocking trough logging saws with tungsten tipped saw blades. COLSCM70SB-NT250I4 COLSCM60LIGHT COLSCM70EMPD COLSCM70MS IVA road tow COLSCM70CPRO-PLUS UFSCD/700 C/NT COLSCM70CMSPRO-PLUS All saws have Tungsten tipped 70cm blade. PTO shafts extra. Pro models have trough extension, log grip, fixed log length guide, wheels. Pro-Plus models have trough extension, safety cut lever + log grip, Blade guard, adjustable log length guide, trough front roller, bearings on the trough pivot, two handles, wheels, sawdust deflector. * Requires a suitable 16 amp power supply and lead. It is not 13 amp. OPTIONAL Extras PTO shaft, SP4636s, MM, 35HP 100 Wheel Kit & Tow Bar (Only for COLSCM70SB-NT250I4) 440 Log grip handle for fitting to log trough (incl on COL models) 95 Replacement 600mm blade Max Log OD HP Price COLSCM60LIGHT 240vlt* Electric direct drive, wheels and handle 23cm COLSCM70EMPD 240vlt* Electric direct drive, wheels and handle 28cm COLSCM70EMPRO 240vlt* Electric belt drive, wheels and handle 28cm COLSCM70ETPRO 415vlt Electric belt drive, trough ext, wheels, log cut length guide. 28cm-11 5, COLSCM70ETPRO-Plus 415vlt Electric belt drive, trough ext, wheels, log cut length guide 28cm-11 5, COLSCM70CPRO tractor pto drive 28cm-11 / 1150 COLSCM70CPRO-PLUS tractor pto drive 28cm-11 / 1350 COLSCM70CMSPRO-PLUS 9hp Petrol engine 28cm COLSCM70MSPRO-PLUS- Estate Petrol Engine, IVA road tow. 28cm IVA Road tow upgrade for COLSCM70MSPRO-PLUS- Estate 300 COLSCM70CPRO-NT25014 Tractor PTO drive. 4mtr Telescopic conveyor tractor Hyd 28cm-11 / 2800 COLSCM70SBPRO-NT250I4 Petrol Engine, 4mtr Telescopic conveyor 28cm UFSCD/700 C/NT 4/250 PI Trough ext, log cut length guide, PTO drive, 4MTR Telescopic Elevator from tractor Hyd UFSCD/700 C/NT 4/250 ET 360vlt Trough ext, log cut length guide, 4MTR Telescopic Elevator 30cm -12 / cm

33 Band Saws MODEL POWER & SOURCE Max cutting Dimensions in cm Table Height Height cm Weight Kg Price Height Length CM SN440 EM 3HP 240vlt x 150 1,690 SN440ET 3HP 415vlt x 150 1,690 SN520EM 3HP 240vlt x 200 1,940 SN520ET 3HP 415vlt x 200 1,940 SN620EM 3HP 240vlt x 260 2,180 SN620ET 3HP 415vlt x 260 2,300 SN620C Tractor pto x 270 2,300 SN620C- PTO x 285 2,780 ET 3HP 415vlt SN720ET 3HP 415vlt x 320 2,750 SN720C Tractor pto x 320 2,900 SN720C- ET PTO + 3HP 415vlt x 335 3,430 OPTIONS PTO shaft, SP4636s, MM, 35HP 100 Log holding / grip with sliding trough 340 Precision blade guide with rollers Sold axle and tow hitch

34 Logging Saw Benches with 15 ton Horizontal splitter Rocking trough logging saws with tungsten tipped saw blades & 28cm diameter cut. 4 meter telescopic / folding conveyor. Long timber extension with rollers. Log grip handle and safety lever on trough for two handed cutting. 15 ton horizontal splitter with adjustable 4 way knife. Standard model: PTO gearbox drives the saw via 3 belt drive & log splitter via pump + self contained hydraulic tank. Conveyor belt runs from tractor hydraulics Optional: PTO gearbox drives the saw via 3 belt drive & log splitter and conveyor via pump &self contained hydraulic tank. Model Price COLCOMBY 2010 T.S.C.4. standard saw + conveyor + 15 ton splitter 4,780 COLCOMBY Upgrade of internal pump etc for hydraulic conveyor. 460 SP4636S PTO shaft 100 COLCOMBY Wheel and drawbar kit for towing off road. 440 COLCOMBY Hydraulic adjustable 4 way knife. 760 COLCOMBY Conveyor belt in 3 parts so you can reduce conveyor height

35 Standard equipment: Telescopic. PVC mat - distance 800mm between slats Rack winch for the extension of the conveyor. Optional wheels or frame only. Telescopic conveyors All models with tow bar and wheels. To deuce delivery costs they are supplied partially assembled in a wooden crate for final assembly by customer. Model Length Width Price Price with frame With wheels CONT 4/250 PI Tractor Hydraulics 4 Mtr 250mm 1,750 2,100 CONT 4/250 EM 240vlt Electric 4 Mtr 250mm 1,900 2,300 CONT 4/250 ET 415vlt Electric 4 Mtr 250mm 1,870 2,300 CONT 4/250 SB Petrol Engine 4 Mtr 250mm 2,850 3,200 CONT 5/250 PI Tractor Hydraulics 5 Mtr 250mm 1,900 2,300 CONT 5/250 EM 240vlt Electric 5 Mtr 250mm 2,100 2,500 CONT 5/250 ET 415vlt Electric 5 Mtr 250mm 2,100 2,500 CONT 5/250 SB Petrol Engine 5 Mtr 250mm 3,000 3,400 CONT 4/400 PI Tractor Hydraulics 4 Mtr 400mm 2,550 2,400 CONT 4/400 EM 240vlt Electric 4 Mtr 400mm 2,650 2,600 CONT 4/400 ET 415vlt Electric 4 Mtr 400mm 2,650 2,600 CONT 4/400 SB Petrol Engine 4 Mtr 400mm 3,375 3,500 CONT 5/400 PI Tractor Hydraulics 5 Mtr 400mm 2,750 2,600 CONT 5/400 EM 240vlt Electric 5 Mtr 400mm 2,850 2,800 CONT 5/400 ET 415vlt Electric 5 Mtr 400mm 2,850 2,800 CONT 5/400 SB Petrol Engine 5 Mtr 400mm 3,950 3,700 Options: PVC conveyor with metal slats: +5% Towing eye:, Steel tray to hold conveyor when conveyor is closed down:, Bigger wheels:, Hyd kit with petrol engine: 1, Variable speed for hydraulic conveyor motor:,300 35

36 WP36 Firewood Processor WP36TR WP30TR Optional 6 way knife WP36IVA Standard Slewing conveyor Optional Timber loader 36

37 WP36 Firewood Processor Hydraulic in-feed and hydraulic conveyor out-feed. Technical data WP 36-8 WP Gross cutting by chain saw, inch 36cm 36cm Drive of chainsaw Hydraulic Hydraulic Normal splitting action / minute, 30 cm length 1.5s 1.5s Rapid splitting action / minute, 30 cm length 1.0s 1.0s Splitting force in ton and knife type 8 ton, 2 & 4 way knife 10 ton, 2 & 4 way knife Max. Stem diameter, cm 36cm 36cm Max. Length of split wood 60cm 60cm Conveyor belt width & length, cm 24cm X 4 mt 24cm X 4 mt Slewing conveyor Yes Yes Drive of conveyor hydraulic Hydraulic Weight, kg 520kg 540kg Power requirement, kw 7,5Kw 7.5Kw Tractor linkage mounted models WP36TR 8 36CM max cut diameter, 60cm max log length, 8 ton splitting, 2-4 way splitting knife, Power in-feed, 4mtr Folding & slewing conveyor, Linkage mounted, PTO driven hydraulics. WP36TR 10 36CM max cut diameter, 60cm max log length, 10 ton splitting, 2-4 way splitting knife, Power in-feed, 4mtr Folding & slewing conveyor, Linkage mounted, PTO driven hydraulics. Road Tow models with full IVA approval. WP36TR-IVA 8. 36CM max cut diameter, 60cm max log length, 8 ton splitting, 2-4 way splitting knife, Power in-feed, 4 meter Folding & slewing conveyor, tractor linkage mounting, PTO + 13hp Honda engine. Note: ring hitch fitted for IVA compliance. WP36TR-IVA CM max cut diameter, 60cm max log length, 10 ton splitting, 2-4 way splitting knife, Power in-feed, 4 meter Folding & slewing conveyor, tractor linkage mounting, PTO + 13hp Honda engine. Note: ring hitch fitted for IVA compliance. 8,250 8,700 11,440 11,900 WP36 Optional Extras. These can be retro fitted to standard PTO machines PTO shaft, MM: SP HP Honda engine kit for WP36TR PTO model (standard on WP36IVA) 1,650 Electric start for petrol engine (not available for WP30 IVA due to weight) Phase 7.5Kw electric motor (not available for WP30 IVA due to weight) 1,650 6 way knife in addition to standard 4 way: FAWP way knife in addition to standard 4 way: FAWP Hydraulic adjustment of splitting knife: FAWP ,210 Timber lifter, lifts full lengths onto in feed: FAWP Two handle splitting levers for using splitter without saw: FAWP Yard Tow kit (not for highway use) axle, hitch, stand (no mudguards or brakes) 750 Spare wheel for IVA axle kit or yard tow kit. 95 Linkage extensions may be required on some tractors when combining PTO and electric or petrol engine power source. 220 Oil cooler kit for hydraulic system: FAWP

38 UNIFOREST TITAN PROCESSOR (200kN) 20T. Nb. 20cm (8 ) optional. Optional accessories: Titan PTO with 2/4 way knife: 18,500 20cm (8 ) log grip and length stop: 150 Telescopic 5mtr conveyor: /60-R14.5 Wheels and tow bar: 1,200 Timber lift with adjustable length: 1,780 3 phase electric (& PTO): 1,700 Hydraulic oil cooler: 440 DM400 Timber rack with 3 chain feed & hyd rollers 6,200 Log Screen on end of conveyor: 450 Spare saw blade: 670 Knife options: 2/4 way: 350 2/6 way: 440 2/8 way: 500 2/12 way:

39 Billet Processors The Riko Rotomat Billet processor is a supper fast and efficient machine for cutting Billets into logs. The design ensures simplicity of use whilst maintaining operator safety. The method of use is as simple as it is ingenious: there are 4 tubular compartments built into a rotating drum, the billet lengths are simply dropped into each chamber as it rotates. As the drum rotates each billet drops down a preset amount and is then held by a serrated grip arm. A Tungsten tipped circular saw blade then cuts the Billet and the cut log is discharged into the area above the conveyor belt (Hydraulic slew from May 2015). As the drum continues to rotate the next Billet is cut and each Billet drops down further ready to be cut on the next rotation. This process continues as the drum rotates and it is simply a case of placing another Billet in the tubular compartments as the drum continues to rotate. The Riko Rotomat Billet Processor ensures:- PYTHON BILLET BUNDLER Fast & Simple Processing of Billets. Technical data Rotomat 5 (incl 6km/h Axle) Rotomat 4 Price with conveyor 3 Phase : 14,250 PTO : 14,500 CE : 15,500 3 Phase : 10,750 PTO : 10,800 CE : 10,200 Road Tow kit with own engine Diesel: TBA Petrol 13hp & PTO: 4,200 Price deduction for no Conveyor (net) 4.5M 2, M 2, M 1,900 PTO shaft SP4636S Variable speed control for conveyor,260,260 Extra drums for different log lengths 20cm & 50cm,450 50cm 450 (Pre May 2015 models) Dimensions L / W / H (cm) 350/240/ /170/160 Weight (kg) 1, Number of Billet Chambers 5 4 Max diameter wood Round wood (cm) Maximum diameter of Billet wood (cm) Possible cutting lengths (cm) 20/25/33/50 * 20/25/33/50 * (20 to 40cm**) Max log length (cm) Maximum number of cuts / minute Power (kw) / voltage (V) 11/400 11/400 Tractor PTO HP**8 24 / / 45 * standard: 25 & 33 cm. Optional: 20 & 50cm. ** May 2015 model. **with tractors under 45HP a drawbar & wheel kit may be required 39

40 Python Billet Bundler Details Price Log Length 100 cm Python Eco Volume 1 meter 3-point linkage Width 140 cm Height 120 cm Python F hyd tip, Length 120 cm 3-point linkage & Weight 200 Kg loader mounting Polyester band 500m X 19mm 60 Band bobbin. 60 Portable with brake Band clips Band tensioner incl Chain ratchet tensioner 110 1,275 1,475 40