Polyiso Commercial Roof Insulation Effective Dates: March 27-June 30, 2015
|
|
|
- Kelley Glenn
- 5 years ago
- Views:
Transcription
1 Polyiso Commercial Roof Insulation Effective Dates: March 27-June 30, 2015 Product Minimum Order Quantity Policy Standard Flat: 1 bundle Standard Tapered: N/A Non-standard Flat/Tapered/Scored: 4 x 8 boards: 12 bundles 4 x 4 boards: 24 bundles Minimum order quantity for boards with the same thickness can be split between 4 x8 and 4 x4 boards on the same truck (i.e. 6 bundles of 4 x8 and 12 bundles of 4 x4 equal ½ truckload). Product thickness restricted to 1/10 th inch increments unless listed on product list. Product Upgrades 25 minimum psi compressive strength adder: $0.03/board foot Resista Facer adder: $0.07/square foot Scored ISO adder: 10% (Minimum order is 12 bundles per thickness) Composite Products Available for Special Order (Non-standard product policy applies): ISOGARD HD Composite (Thicknesses available from 1.5 to 4.0 ) HailGard Composite Board (Thicknesses available from 1.5 to 4.0 ) ISO 95+ GL Woodfiber Composite (Flat & Tapered; Thicknesses available from 1.5 to 4.0 ) Ordering non-standard products: Sales Representative will contact customer service via phone or to submit the customer s purchase order confirming order of a non-standard product. Firestone must receive a copy of the customer s PO in order for customer service to enter the order. The order acknowledgement will contain the product nomenclature, quantity, and a delivery date. Changes to the non-standard product portion of the order may be made until two weeks prior to the original scheduled delivery date. Due to manufacturing scheduling, product cure times, and quality assurance testing timelines, we cannot permit any product changes to be made within the two week window. If time between order placement and date of delivery is less than or equal to two weeks, no changes will be permitted. Because the product is manufactured specifically for the customer within the two-week window prior to delivery, the customer must take ownership of the non-standard product ordered and produced. Changes to the original delivery or customer pick-up date will be permitted up until 72 hours prior to that date. If a change in delivery date does occur, it must be within 30 days of the original delivery date. At the end of this timeframe, customer service will contact the rep for delivery instructions to occur within 72 hours. Non-standard products appearing on the Slow Moving Inventory List are not subject to minimum order requirements unless a quantity greater than that on-hand is desired.
2 Standard Product Shipping/Customer Pick-Up Rescheduling of standard product orders is permitted prior to 72 hours of the scheduled delivery or customer pickup. Please note that rescheduled product may be used to fill other existing orders, and a delay may be experienced should it be necessary to manufacture additional product to fill the rescheduled order. Lack of available shipping slots may limit rescheduling options in peak demand periods. NATIONWIDE STANDARD FLAT ITEMS Product Line Thickness Size LTTR ISO 95+ GL x x x48, 48 x x x48, 48 x x x48, 48 x x x48, 48 x x x x x x48, 48 x Resista x x x x ISOGARD HD x48, 48 x (R-Value) STANDARD R-VALUE REFERENCE R-Value Recommended Setup layer 3.3 (R-19.2) layers 1.75 (R-20.0) layers 2.2 (R-25.2) layers 2.6 (R-30.0) layers 3.1 (R-36.0) layers 3.5 (R-41.0) NATIONWIDE STANDARD TAPERED ITEMS Product Line Product ISO 95+ GL Tapered Panels ⅛ Per Foot Setup: AA, A, B, C ¼ Per Foot Setup: G, H, X, Y, Z ½ Per Foot Setup: Q Resista Tapered Panels ⅛ Per Foot Setup: AA, A ¼ Per Foot Setup: X, Y, Z CHECK THE ATTACHED LIST FOR ADDITIONAL STANDARD PRODUCTS SPECIFIC TO INDIVIDUAL PLANTS If any item is transitioned from standard to non-standard in a subsequent version of the Polyiso Commercial Roof Insulation list, standard product minimum order quantity will be honored for a period of six months from the change. Please Note The term standard item refers to commonly ordered items that fall under the standard minimum order quantity policy. While every effort will be made to minimize lead times on these products, market conditions may prevent them from being immediately ready for shipment. STOCKING LOCATIONS: BRI=Bristol, CT YWD=Youngwood, PA JAX=Jacksonville, FL FLO=Florence, KY DEF=DeForest, WI COR=Corsicana, TX SLC=Salt Lake City, UT ITEM LIST KEY = Standard Item = Available (Non-Standard Item) = Not Available at Plant* *If a product is not available at your nearest plant, please contact customer service or your Region Business Manager for ordering options.
3 ISO 95+ GL Products listed below are also available in minimum 25psi. These are made-to-order products which may be subject to extended lead times. Consult the non-standard product ordering policy for minimum order quantity. 0.5" W " x 48" 0.5" W " x 96" 1.0" W " x 48" 1.0" W D 48" x 48" Double Bundle 1.0" W " x 96" 1.1" W " x 96" 1.2" W " x 96" 1.25" W " x 48" 1.25" W D 48" x 48" Double Bundle 1.25" W " x 96" 1.3" W " x 96" 1.4" W " x 96" 1.5" W " x 48" 1.5" W D 48" x 48" Double Bundle 1.5" W " x 96" 1.6" W " x 48" 1.6" W D 48" x 48" Double Bundle 1.6" W " x 96" 1.7" W " x 48" 1.7" W " x 96" 1.75" W " x 48" 1.75" W D 48" x 48" Double Bundle 1.75" W " x 96" 1.8" W " x 48" 1.8" W " x 96" 1.9" W " x 96" 2.0" W " x 48" 2.0" W D 48" x 48" Double Bundle 2.0" W " x 96" 2.1" W " x 48" 2.1" W D 48" x 48" Double Bundle 2.1" W " x 96" 2.2" W " x 48" 2.2" W D 48" x 48" Double Bundle 2.2" W " x 96" 2.25" W " x 48" 2.25" W D 48" x 48" Double Bundle 2.25" W " x 96" 2.3" W " x 48" 2.3" W D 48" x 48" Double Bundle 2.3" W " x 96" 2.4" W " x 96" 2.5" W " x 48" 2.5" W D 48" x 48" Double Bundle 2.5" W " x 96" 2.6" W " x 48" 2.6" W " x 96" 2.7" W " x 96" 2.75" W " x 48" 2.75" W D 48" x 48" Double Bundle 2.75" W " x 96" 2.8" W " x 48" 2.8" W D 48" x 48" Double Bundle 2.8" W " x 96" 2.9" W " x 96" 3.0" W " x 48" 3.0" W D 48" x 48" Double Bundle 3.0" W " x 96" 3.1" W " x 48" Page 1 of 4
4 3.1" W D 48" x 48" Double Bundle 3.1" W " x 96" 3.2" W " x 48" 3.2" W D 48" x 48" Double Bundle 3.2" W " x 96" 3.25" W " x 48" 3.25" W D 48" x 48" Double Bundle 3.25" W " x 96" 3.3" W " x 48" 3.3" W D 48" x 48" Double Bundle 3.3" W " x 96" 3.4" W " x 96" 3.5" W " x 48" 3.5" W D 48" x 48" Double Bundle 3.5" W " x 96" 3.6" W " x 96" 3.7" W " x 96" 3.75" W " x 48" 3.75" W " x 96" 3.8" W " x 96" 3.9" W " x 96" 4.0" W " x 48" 4.0" W D 48" x 48" Double Bundle 4.0" W " x 96" 4.5" W " x 96" ISOGARD HD 0.5" W8H3GG " x 48" 0.5" W8H3GG050I 48" x 48" Half Bundle 0.5" W8H3GG050H 48" x 96" Half Bundle RESISTA Products listed below are also available in minimum 25psi for thicknesses 3.0" and less. These are made-to-order products which may be subject to extended lead times. Consult the non-standard product ordering policy for minimum order quantity. ISO 95+ GL Tapered Panels 1.0" W821RR " x 48" 1.0" W821RR100D 48" x 48" Double Bundle 1.0" W821RR " x 96" 1.25" W821RR " x 48" 1.25" W821RR " x 96" 1.5" W821RR " x 48" 1.5" W821RR150D 48" x 48" Double Bundle 1.5" W821RR " x 96" 1.75" W821RR " x 96" 2.0" W821RR " x 48" 2.0" W821RR200D 48" x 48" Double Bundle 2.0" W821RR " x 96" 2.1" W821RR " x 96" 2.5" W821RR " x 48" 2.5" W821RR " x 96" 2.8" W821RR " x 48" 2.8" W821RR " x 96" 3.0" W821RR " x 48" 3.0" W821RR300D 48" x 48" Double Bundle 3.0" W821RR " x 96" 3.1" W821RR " x 96" 3.25" W821RR " x 96" 3.5" W821RR " x 48" 4.0" W821RR " x 96" Products listed below are also available in minimum 25psi. These are made-to-order products which may be subject to extended lead times. Consult the non-standard product ordering policy for minimum order quantity. 1/16" per foot slope 1A (0.50"-0.75") W " x 48" Page 2 of 4
5 1B (0.75"-1.0") W " x 48" 1 (1.0"-1.25") W " x 48" 2 (1.25"-1.5") W " x 48" 3 (1.5"-1.75") W " x 48" 4 (1.75"-2.0") W " x 48" 5 (2.0"-2.25") W " x 48" 6 (2.25"-2.5") W " x 48" 1/8" per foot slope AA (0.5"-1.0") W " x 48" A (1.0"-1.5") W " x 48" B (1.5"-2.0") W " x 48" C (2.0"-2.5") W " x 48" D (2.5"-3.0") W " x 48" E (3.0"-3.5") W " x 48" F (3.5"-4.0") W " x 48" FF (4.0"-4.5") W " x 48" 3/16" per foot slope J (1.0"-1.75") W " x 48" K (1.75"-2.5") W " x 48" L (2.5"-3.25") W " x 48" M (3.25"-4.0") W " x 48" JJ (0.5"-1.25") W " x 48" KK (1.25"-2.0") W " x 48" LL (2.0"-2.75") W " x 48" MM (2.75"-3.5") W " x 48" 1/4" per foot slope G (1.0"-2.0") W " x 48" H (2.0"-3.0") W " x 48" I (3.0"-4.0") W " x 48" X (0.5"-1.5") W " x 48" Y (1.5"-2.5") W " x 48" Z (2.5"-3.5") W " x 48" ZZ (3.5"-4.5") W " x 48" 3/8" per foot slope SS (0.5"-2.0") W " x 48" TT (2.0"-3.5") W " x 48" 1/2" per foot slope Q (0.5"-2.5") W " x 48" QQ (2.5"-4.5") W " x 48" XX (1.0"-3.0") W " x 48" RESISTA Tapered Panels Products listed below are also available in minimum 25psi. These are made-to-order products which may be subject to extended lead times. Consult the non-standard product ordering policy for minimum order quantity. 1/16" per foot slope 1A (0.50"-0.75") W8311R " x 48" 1B (0.75"-1.0") W8311R " x 48" 1 (1.0"-1.25") W8311R " x 48" 2 (1.25"-1.5") W8311R " x 48" 3 (1.5"-1.75") W8311R " x 48" 4 (1.75"-2.0") W8311R " x 48" 5 (2.0"-2.25") W8311R " x 48" 6 (2.25"-2.5") W8311R " x 48" 1/8" per foot slope AA (0.5"-1.0") W8312R " x 48" A (1.0"-1.5") W8312R " x 48" B (1.5"-2.0") W8312R " x 48" C (2.0"-2.5") W8312R " x 48" D (2.5"-3.0") W8312R " x 48" E (3.0"-3.5") W8312R " x 48" F (3.5"-4.0") W8312R " x 48" FF (4.0"-4.5") W8312R " x 48" 3/16" per foot slope J (1.0"-1.75") W8313R " x 48" K (1.75"-2.5") W8313R " x 48" L (2.5"-3.25") W8313R " x 48" M (3.25"-4.0") W8313R " x 48" JJ (0.5"-1.25") W8313R " x 48" KK (1.25"-2.0") W8313R " x 48" LL (2.0"-2.75") W8313R " x 48" Page 3 of 4
6 MM (2.75"-3.5") W8313R " x 48" 1/4" per foot slope G (1.0"-2.0") W8314R " x 48" H (2.0"-3.0") W8314R " x 48" I (3.0"-4.0") W8314R " x 48" X (0.5"-1.5") W8314R " x 48" Y (1.5"-2.5") W8314R " x 48" Z (2.5"-3.5") W8314R " x 48" ZZ (3.5"-4.5") W8314R " x 48" 3/8" per foot slope SS (0.5"-2.0") W8316R " x 48" TT (2.0"-3.5") W8316R " x 48" 1/2" per foot slope Q (0.5"-2.5") W8318R " x 48" QQ (2.5"-4.5") W8318R " x 48" XX (1.0"-3.0") W8318R " x 48" ISOGARD HD Composite HailGard Composite Wood Fiber Composite 1.5" W821GH " x 48" 1.5" W821GH " x 96" 1.75" W821GH " x 48" 1.75" W821GH " x 96" 2.0" W821GH " x 48" 2.0" W821GH " x 96" 2.5" W821GH " x 48" 2.5" W821GH " x 96" 3.0" W821GH " x 48" 3.0" W821GH " x 96" 3.5" W821GH " x 48" 3.5" W821GH " x 96" 4.0" W821GH " x 48" 4.0" W821GH " x 96" 4.5" W821GH " x 48" 4.5" W821GH " x 96" 1.5" W " x 48" 1.5" W " x 96" 2.0" W " x 48" 2.0" W " x 96" 2.5" W " x 48" 2.5" W " x 96" 3.0" W " x 48" 3.0" W " x 96" 3.5" W " x 48" 3.5" W " x 96" 4.0" W " x 48" 4.0" W " x 96" 1.5" W8211X " x 48" 1.5" W8211X " x 96" 2.0" W8211X " x 48" 2.0" W8211X " x 96" 2.5" W8211X " x 48" 2.5" W8211X " x 96" 3.0" W8211X " x 48" 3.0" W8211X " x 96" 3.5" W8211X " x 48" 3.5" W8211X " x 96" 4.0" W8211X " x 48" 4.0" W8211X " x 96" Page 4 of 4
Bimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE)
Bimba Extruded Linear Thrusters Engineering Specifications Maximum Operating Pressure 140 psi (10 bar) Temperature Range 15 to 160 degrees F (-10 to 70 degrees C) Expected Service Life 1,500 miles (with
Linear Thrusters/PneuMoment
/PneuMoment Extruded TE Series (Composite Bearings) 3.3-3.10 3.11-3.16 T Series Multiple Position T4 Series Movable Housing 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 Pneu-Moment Checklist PneuMoment Pneumatic
Owner letters will be mailed based upon part number and production date, starting with earlier production vehicles.
TO: ALL TOYOTA DEALER PRINCIPALS, SERVICE MANAGERS, PARTS MANAGERS SUBJECT: SPECIAL SERVICE CAMPAIGN (SSC) 50J PHASE 1 (FRONT SUSPENSION LOWER BALL JOINT) As announced in May, 2005, Toyota will initiate
Linear Thrusters/PneuMoment
/PneuMoment Extruded TE Series 3.3-3.10 3.11-3.16 T Series Multiple Position T4 Series Movable Housing 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 Pneu-Moment Checklist PneuMoment Pneumatic Actuators PneuMoment
NOTICE. Table 1 Standard Truckload Quantities Coiled Pipe 1
WL08 SHIPPING DATA NOTICE The information in this publication is for estimating purposes only. quantities herein were developed for a maximum load weight of 47,000 lbs (2,35 kg) and maximum level load
Linear Thrusters/PneuMoment
/PneuMoment Extruded 3.3-3.10 TE Series 3.11-3.16 T Series 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 PneuMoment Pneumatic Actuators PneuMoment Application 3.33 3.34-3.48 3.49 Bimba 304 stainless steel body
Linear Thrusters/PneuMoment
/PneuMoment Extruded 3.3-3.10 TE Series 3.11-3.16 T Series 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 PneuMoment Pneumatic Actuators PneuMoment Application 3.33 3.34-3.48 3.49 Pneu-Moment Bimba Pneu-Moment
Two Shaft Linear Thrusters
Two Shaft Linear Thrusters TWO SHAFT THRUSTERS Seven Models with bores from 9/16 to 4 Compact, light weight robust design Smooth linear motion CYLINDER Several manufacturers to choose from Pneumatic or
Four Shaft Linear Thrusters
Four Shaft Linear Thrusters FOUR SHAFT THRUSTERS Three Models with bores from 2 to 4 Twice the load capacity of comparable two shaft units Reduced deflection and bearing play Compact, light weight robust
Patrons will be allowed access into the venue by the Gate Number denoted on their tickets.
After years of eager anticipation, the wait for U2 is finally coming to an end. In an effort to answer any possible questions you may have regarding the show and Commonwealth Stadium, we have compiled
All Toyota Dealer Principals, Service Managers, Parts Managers. Certain 2010 Model Year Tacoma 4WD Vehicles Front Propeller Shaft
To: Subject: All Toyota Dealer Principals, Service Managers, Parts Managers Safety Recall A0D Certain 2010 Model Year Tacoma 4WD Vehicles Front Propeller Shaft On February 11, 2010, Toyota filed a Defect
Recall - Cross Tank Fuel Flow Condition RECALL NUMBER: 93S68
1990 Ford Truck F 150 2WD Pickup V8-302 5.0L Copyright 2013, ALLDATA 10.52SS Page 1 Technical Service Bulletin # 93S68 Date: 930901 Recall - Cross Tank Fuel Flow Condition RECALL NUMBER: 93S68 Date: Sept.
Remedy Procedure Phase 2 ( model year)
To: Subject: All Toyota Dealer Principals, Service Managers, Parts Managers Safety Recall A0J Certain 2005 through 2008 Toyota Corolla and Corolla Matrix Vehicles Equipped with 1ZZ-FE Electronic Control
The owner notification will commence in late July, 2006, approximately one week after the dealer notification.
TO: SUBJECT: ALL TOYOTA DEALER PRINCIPALS, SERVICE MANAGERS, PARTS MANAGERS SPECIAL SERVICE CAMPAIGN (SSC) 60F (SAFETY RECALL) 2004 THROUGH 2005 HIGHLANDER AND EARLY 2006 HIGHLANDER HV CENTER CONSOLE (FLOOR
YOUR DEALERSHIP GRAPHICS ON ANY ONE OF THESE FRAMES!
YOUR DEALERSHIP GRAPHICS ON ANY ONE OF THESE FRAMES! Dealer Name: Address: City/State/Zip: Phone: Fax: ADI: PO#: E-mail: Purchase Manager: DATE: 19330395UFCD 19330733UFCD 19330395UFCD (Chrome) / 19330733UFCD
CustomerServicesDivision
CustomerServicesDivision Toyota Motor Sales, U.S.A., Inc. 19001 South Western Avenue P.O. Box 2991 Torrance, CA 90509-2991 TO: SUBJECT: ALL TOYOTA DEALER PRINCIPALS, SERVICE MANAGERS, PARTS MANAGERS SPECIAL
PERFORMANCE DATA. The lightweight, durable, low-profile ROD CYLINDER SLIDES
The lightweight, durable, low-profile H-Block design is the most versatile of our rod cylinder slides. It also has one of the highest ratings of load weight vs extension for its kind in the industry. The
Linear Thrusters/PneuMoment
/PneuMoment Extruded 3.3-3.10 TE Series (Composite Bearings) 3.11-3.16 T Series (Ball Bearings) 3.17-3.22 Multiple Position 3.23-3.24 NEW T4 Series 3.25-3.28 Checklist 3.29 PneuMomentPneumatic Actuators
MAXIMUM LOAD. 9.1 kg / 20 lb MAXIMUM LOAD. 9.1 kg / 20 lb
TC54-6127 MAXIMUM LOAD 9.1 kg / 20 lb MAXIMUM LOAD 34 kg / 75 lb MAXIMUM LOAD 6.8 kg / 15 lb MAXIMUM LOAD 9.1 kg / 20 lb WARNING: For use with most LCD/Plasma televisions weighing 34 kg / 75 lb or less.
INSTALLATION INSTRUCTIONS Unitronic 3 Turbo-Back Exhaust System for MK5 Jetta /GLI UH020-EXA
Unitronic recommends that you read through the entire installation instructions prior to beginning the installation to familiarize yourself with the included components, tools required, and procedures
Model 5-025, 5-050, &
Model 5-025, 5-050, 5-075 & 5-150 7 Model 5-025, 5-050, 5-075 & 5-150 8 Eductor Block Exploded View Model 5-025, 5-050, 5-075 & 5-150 9 Figure 1 Item Part Name Model Model Model Model 5-025 5-050 5-075
INSTALLATION INSTRUCTIONS Unitronic Turbo-Back Exhaust System for MK7 GTI UH026-EXA
Unitronic Turbo-Back Exhaust System for MK7 GTI Unitronic recommends that you read through the entire installation instructions prior to beginning the installation to familiarize yourself with the included
BRAKE WINCHES B1200B B1200G B2500 B2500G B3500 B1500 B1500G B1500
BRAKE WINCHES B1500 B1200B B1200G B1500 B1500G B2500 B2500G B3500 B1200B, B1200G B1500, B1500G B2500, B2500G B3500 X 6 650 lb/295 kg 1 1200 lb/545 kg 6 728 lb/330 kg 1 1500 lb/680 kg 3 1554 lb/705 kg 1
Air Commander Part No , with air Part No , without air
EASYSTREET Air Commander Part No. 27325, with air Part No. 27332, without air www.airliftcompany.com Please read these instructions completely before proceeding with installation. The oil level in the
Operation and Maintenance Manual
Operation and Maintenance Manual Lineman s Hoist Models 250A 300A 250DA 300DA PUBLICATION PART NO. LM931A IMPORTANT! CAUTION This manual contains important information for the correct installation, operation
Analog RF Proof of Performance Testing Methodology
Analog RF Proof of Performance Testing Methodology System Description: Dickey Rural Networks CATV network is a fiber to the home (FTTH) system with an RF overlay. The headend is based in Oakes, ND. This
Oil Change, Multi Point Inspection, Tire Rotation
Oil Change, Multi Point Inspection, Tire Rotation / 29 95 49 95 Conventional Synthetic At participating Toyota Dealers in AL, FL, GA, SC & NC. Not valid with any other offer or prior purchase. Installation
ROAD COMMISSION FOR IONIA COUNTY
ROAD COMMISSION FOR IONIA COUNTY 170 E. Riverside Drive P.O. Box 76 Ionia, Michigan 48846 Phone (616) 527-1700 Fax (616) 527-8848 CHARLES G. MINKLEY WILLIAM E. WEISGERBER KENNETH L. GASPER ALBERT A. ALMY
All Purpose Fasteners and Plates
W56RAC Size Quantity Weight Qty/ 2" Metal Plates* 4180 2" 1000/pail 34 lbs 40 Insulation Fastening Plate (Round)* 4190 3" 1000/pail 42 lbs 35 V-Plate* 4182 2-1/4" 500/pail 28 lbs 80 All-Purpose Fasteners*
Creative Bus Dba Getaway Bus REPRESENTING New England Wheels
Creative Bus Dba Getaway Bus REPRESENTING New England Wheels ORDER PACKET Contract #TRIPS-15-MB-GB MiniBus with ADA Option CONTRACT # TRIPS-15-MB-GB ORDER PACKET FOR MiniBus with ADA Option Creative Bus
GRACO KING 56:1 AIRLESS SPRAY PUMP
GRACO KING 56:1 AIRLESS SPRAY PUMP PART NUMBERS AND SCHEMATICS GUIDE Company Profile Since 1944, Marco has developed a strong tradition of providing innovative and reliable products and services to the
Elcometer 506 Pull- Off Adhesion Gauge. elcometer.com 1
Elcometer 506 Pull- Off Adhesion Gauge elcometer.com 1 Elcometer 506 STANDARDS: ASTM D4541, ASTM D7234, AS/NZS 1580.408.5, BS 1881-207, DIN 1048-2, EN 12636, EN 13144, EN 1542, EN 24624, ISO 16276-1, ISO
JOB LOSSES BY STATE, State Industry US total AK AL AR AZ CA CO CT Agriculture, forestry, fisheries -15, ,
State US total AK AL AR AZ CA CO CT -15,597-35 -272-248 -232-3,163-132 -46-3,858-68 4-19 -291-303 -116-11 -3,318-9 -55-32 -73-314 -66-35 -554,750-194 -14,113-7,789-4,781-55,255-4,453-6,836-9,326-13 -190-282
Page 1 of 10 SAFETY RECALL 98S37 Front Suspension Lower Control Arm Ball Joint Replacement - Certain 1990 through 1999 Ford Crown Victoria Police, Fleet, Taxi, Natural Gas Vehicles (NGV), and Lincoln Town
FF3000 PORTABLE FLANGE FACER
FF3000 PORTABLE FLANGE FACER FEATURES SETUP & OPERATION COMPONENTS & ACCESSORIES TECHNICAL DATA Compact, lightweight, and easy to set up. Compact and Versatile Patented, low profile machine is one of the
Rigid Couplings. P-1686-TBW 2/17... TB Wood s F7-1
Rigid Couplings F7 F7-1 AVS Series Couplings AVS Series (Adjustable Vertical Spacer) Coupling used for vertical turbine pumps No flexible element Integral nut used for infinite adjustment of pump turbine
M SERIES BY VENT-A-HOOD CANADIAN MSRP PRICE BOOK. January, Dobbie Drive Cambridge, Ontario N1T 1S8
M SERIES BY VENT-A-HOOD CANADIAN MSRP PRICE BOOK January, 2016 395 Dobbie Drive Cambridge, Ontario N1T 1S8 TELEPHONE: 519.624.5710 TOLL-FREE: 888.340.4949 FAX: 519.624.5722 TERMS AND CONDITIONS OF SALE
SAN FRANCISCO MUNICIPAL TRANSPORTATION AGENCY BOARD OF DIRECTORS. RESOLUTION No
SAN FRANCISCO MUNICIPAL TRANSPORTATION AGENCY BOARD OF DIRECTORS RESOLUTION No. 16-036 WHEREAS, The San Francisco Municipal Transportation Agency has received a request, or identified a need for traffic
Centrifugal Pump Warranty Guide
Centrifugal Pump Warranty Guide The purpose of this guide is to help identify pump problems, their cause, and suggest ways to prevent recurrence. Ace Pump Corporation is an ISO 9001:2000 certified company
Certain Model Year Tacoma 2TR-FE Vehicles Exhaust Pipe Replacement for Catalytic Converter
To: Subject: All Toyota Dealer Principals, Service Managers, and Parts Managers Special Service Campaign (SSC) F0U Certain 2010-2014 Model Year Tacoma 2TR-FE Vehicles Exhaust Pipe Replacement for Catalytic
All Purpose Fasteners and Plates
Size Quantity Weight Qty/ /Pail 2" Metal Plates* 4180 2" 1000/pail 34 lbs 40 $105.00 Insulation Fastening Plate (Round)* 4190 3" 1000/pail 42 lbs 35 $110.00 V-Plate* 4182 2-1/4" 500/pail 28 lbs 80 $59.00
Now you can offer your customers faster service:
VALVE EXCHANGE PROGRAM FACTORY RECONDITIONED VALVES NOW IN STOCK (MOST MODELS AVAILABLE FOR IMMEDIATE DELIVERY) Now you can offer your customers faster service: - Economically priced - Minimize down time
Elcometer 506 Pull- Off Adhesion Gauge. Product Brochure/Flyer. 506 PAT Adhesion Tester
Product Brochure/Flyer Elcometer 506 Pull- Off Adhesion Gauge elcometer.com 1 Copyright 2016 Burwell Technologies For more information: 1300 287 935 / mail@burwell.com.au / www.burwell.com.au Elcometer
All Toyota Dealer Principals, Service Managers, and Parts Managers
To: All Toyota Dealer Principals, Service Managers, and Parts Managers Subject: Safety Recall BSJ (Supplement to B0J) Certain 2006 and 2007 Model Year Highlander Hybrid Vehicles (HV) Intelligent Power
MARCH COYOTE 9.5 x 19 (292 mm x 509 mm) Terminal Dome Closure Kits
MARCH 2012 COYOTE 9.5 x 19 (292 mm x 509 mm) Terminal Dome Closure Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before
AUTO DEALER ONLINE PROGRAM USER GUIDE
AUTO DEALER ONLINE PROGRAM USER GUIDE Table of Contents SECTION PAGE 1 GENERAL INFORMATION 1.1 Overview.3 1.2 Requirements..3 1.3 Application Functionality..3 1.4 Hours of Online Service.. 3 2 - ACCESSING
Too Good to Throw Away Implementation Strategy
Too Good to Throw Away Implementation Strategy Council Briefing by Sanitation Services October 4, 2006 Purpose of Briefing Summarize preparations for Too Good To Throw Away recycling services FY07 Recommend
Polypropylene Schedule 80 Natural & Black SR Threaded Fittings
ount (s): 060 Sch 80 Threaded Natural PP Molded Fittings to 2" 061 Sch 80 Threaded Black PP Molded Fittings to 2" Item prices may have changed from those shown in this sheet. See Spears On-line Catalog
FY 2002 AWA INSPECTIONS
FY 22 AWA INSPECTIONS number of Number of inspections Number of inspections facilities and (sites) category category Inspections for Compliance Other Types of Inspections Dealers 3,893 4,846 Prelicensing
SERIES HYDRAULIC MOTORS
D9 SERIES HYDRAULIC MOTORS D9 overview The D9 Series of motor is the largest member of the White Drive Product s family. The product is capable of producing torque values comparable to competitive motors,
CERTAIN 2018 MODEL YEAR EXPEDITION AND NAVIGATOR VEHICLES EQUIPPED WITH R-1234YF REFRIGERANT - SPECIAL R-1234YF REFRIGERANT SERVICE INFORMATION
PAGE 1 OF 33 CERTAIN 2018 MODEL YEAR EXPEDITION AND NAVIGATOR VEHICLES EQUIPPED WITH R-1234YF REFRIGERANT - SPECIAL R-1234YF REFRIGERANT SERVICE INFORMATION OVERVIEW This program provides special service
GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN
GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN Goulds Water Technology is renowned for manufacturing the highest quality pumping equipment utilizing the best engineering practices available worldwide.
Weekly Statistical Bulletin
API 1220 L Street, NW Washington, DC 20005 Weekly Statistical Bulletin STATISTICS DEPARTMENT Volume: 93 Number: 35 Week Ending: August 31, 2012 SUMMARY (In thousands of 42-gallon barrels per day, except
DURAPLATE. Advanced composite panels for diverse applications.
DURAPLATE Advanced composite panels for diverse applications. Advanced Composite Technology for Next-Level Product Performance Unmatched Durability, Increased Strength And Improved Appearance DuraPlate,
Series OCG Pneumatic Cylinders
The Price Alternative Series OCG Pneumatic Cylinders Repairable round body cylinders 6 bore sizes 1 standard stroke lengths High speed/double acting www.phdinc.com (8) 624-811 OCG1 ORDERING DATA DESIGN
P.O. Box 1388 West Sacramento, CA (916) Fax: (916)
P.O. Box 1388 West Sacramento, CA 95691 (916) 372-5411 Fax: (916) 373-0952 www.hecogear.com Model 16 Installation Dimensions 30,000 in lbs Continuous Torque Output 5.2 to 1 Ratio 20,000 lb. Maximum Radial
7400 Series End Drive Conveyors
700 Series End Drive Conveyors Installation, Maintenance and Parts Manual Flat Belt Conveyor Cleated Belt Conveyor DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 0 975 Cottonwood Ave. TEL: -800-97-866
SPECIAL SERVICE CAMPAIGN (SSC) 10F ( MY ECHO AND AVALON TETHER ANCHOR UPGRADE)
TO: SUBJECT: ALL TOYOTA DEALER PRINCIPALS, SERVICE MANAGERS, PARTS MANAGERS SPECIAL SERVICE CAMPAIGN (SSC) 10F (2000-2001 MY ECHO AND AVALON TETHER ANCHOR UPGRADE) Toyota will initiate a Special Service
Field Installation of the Joystick Conversion Kit (DUAL CONTROL){1408, 5057, 5059, 5264, 5705}
Media Search - REHS1805 - Field Installation of the 233-5720 Joystick Conversion K Page 1 of 54 Special Instruction Field Installation of the 233-5720 Joystick Conversion Kit (DUAL CONTROL){1408, 5057,
NISSAN BULLETIN 2015 Murano ABS Actuator Voluntary Safety Recall Campaign
NISSAN BULLETIN 2015 Murano ABS Actuator Voluntary Safety Recall Campaign Attention: Dealer Principal, Sales, Service & Parts Managers Reference: PC375 Date: June 5, 2015 A STOP SALE CONDITION IS IN EFFECT.
The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
To: Subject: All Toyota Dealer Principals, Service Managers, Parts Managers Warranty Enhancement ZTV 2004 to Certain 2009 Model Year Prius Vehicles Extension of Warranty Coverage for Combination Meter
McQuay. Seasonmaker Horizontal Fan Coil. TSC Vintage G. Last Manufactured: Replacement Parts List No Revision C 08/2016
Replacement Parts List 057117500 Revision C 08/2016 McQuay Seasonmaker Horizontal Fan Coil TSC 021-121 Vintage G Last Manufactured: 1997 To find your Daikin Applied parts distributor, call 1-800-377-2787
Graphically Characterizing the Equilibrium of the Neoclassical Model
Graphically Characterizing the Equilibrium of the Neoclassical Model ECON 30020: Intermediate Macroeconomics Prof. Eric Sims University of Notre Dame Spring 2018 1 / 28 Readings GLS Ch. 15 GLS Ch. 16 For
Hydraulic Motor & Brake
SERIES 500-501 - 510-511 - 520-521 - 530-531 - 50-51 - MEDIUM DUTY Hydraulic Motor & rake RE RE (ll Series) For Medium Duty pplications Overview series descriptions RE Series motors offer the perfect compromise
LEADER CORPORATION CATALOG
LEADER CORPORATION CATALOG Release: 2012 Contacts: Justin Arcari Mike Arcari 51644 Filomena Drive Shelby Township, MI 48315 p. 586.566.7114 f. 586.566.7115 www.leader-corp.com 51644 Filomena Drive Shelby
National Routing Number Administration p-ani Activity and Projected Exhaust Report
National Routing Number Administration 2016 p-ani Activity and Projected Exhaust Report The ATIS Industry Numbering Committee developed the P-ANI Administration Guidelines, which contain the following
Please read these instructions completely before proceeding with installation. Read all maintenance guidelines on page 7 before operating the vehicle.
MN-643 (02511) ECR 5461 Kit No. 39205 Please read these instructions completely before proceeding with installation Item P/N Description Quantity A 26391 Driver-Side Beam Assembly 1 B 26414 Passenger-Side
1. Owner Notification Letter Mailing Date
TO: SUBJECT: ALL TOYOTA DEALER PRINCIPALS, SERVICE MANAGERS, PARTS MANAGERS SPECIAL SERVICE CAMPAIGN (SAFETY RECALL) 60H (2005 THROUGH LATE 2006 MODEL YEAR SCION tc SIDE IMPACT AIRBAG SENSORS) Toyota will
Please refer to the Frame Inspection Technical Instructions for the inspection procedure.
To: Subject: All Toyota Dealer Principals, Service Manager, and Parts Managers (located in AK, AL, AR, AZ, CA, CO, FL, GA, HI, IA, ID, KS, LA, MO, MS, MT, NC, ND, NE, NM, NV, OK, OR, SC, SD, TN, TX, UT,
Sunoco, Inc Market Street LL Philadelphia, PA June 29, 2006
ORIGINAL : 2532 Sunoco, Inc. 1735 Market Street LL Philadelphia, PA 19103-7583 June 29, 2006 Environmental Quality Board Rachel Carson State Office Building 400 Market St. - 15 th floor Harrisburg, PA
URAI ROTARY POSITIVE BLOWERS/EXHAUSTERS
URAI ROTARY POSITIVE BLOWERS/EXHAUSTERS B-12X95 October 2004 Versatile, reliable ROOTS Universal RAI blower fits your application Remarkably adaptable You can mount the Universal RAI blower upside down
ANNEX D APPENDIX D M915A5, LINE HAUL TRACTOR TRUCK KIT SPECIFIC REQUIREMENTS. Revision Date Pages Description Draft April 2012 ALL Ron Swanson
ANNEX D APPENDIX D M915A5, LINE HAUL TRACTOR TRUCK KIT SPECIFIC REQUIREMENTS Revision Date Pages Description Draft 1.0 9 April 2012 ALL Ron Swanson Formating, insert revision table and acronyms. Verified
Anodized Aluminum Manifolds
nodized luminum Manifolds These manifolds can t rust, they resist corrosion and cost less! Made from heavy-wall aluminum extrusions, tested to 120 psi. Standard manifolds have 1" or 1¹ ₂" process water
2018 Clean Diesel Rebate Program
The Department of Environmental Quality s Nebraska Clean Diesel Rebate Program is offering rebates to replace eligible agricultural irrigation pump diesel engines with all-electric equipment. The diesel
BAF Overview. Barry P. Carr Northeast Regional Sales Manager November 2012
BAF Overview Barry P. Carr Northeast Regional Sales Manager November 2012 Founded in 1992 by industry veterans is the leading provider of natural gas vehicle conversions in the United States More than
HALE STEEL PRICE LIST#0818 Effective August 1, 2018
HALE STEEL PRICE LIST#0818 Effective August 1, 2018 TABLE OF CONTENTS Single Faced Flat Shelving... 4 Double Faced Flat Shelving... 5 Single Faced Integral Back Divider Shelving.... 6 Double Faced Integral
SPECIFICATIONS FOR MOTOR OPERATED VALVES
Doc No: 254625-300-SP-INT-004 Rev: B Page 1 of 11 SPECIFICATIONS FOR MOTOR OPERATED VALVES Hindustan Petroleum Corporation Ltd Visakha Dispatch Station VR-ATP Area, Naval Base Post Visakhapatnam - 530
Ten80 Education - Secondary Programs Order Form
Ten80 Education - Secondary Programs Order Form Order Email: info@ten80education.com Fax: 518-533-3804 Toll Free Phone: 1-855-836-8033 Your Information Name: Shipping Address: School/Org: Phone: Email:
Centrifugal Cabinet Fans Model BCF Belt Drive Low-Profile
Centrifugal Cabinet s BCF Belt Drive Low-Profile May 2007 BCF Belt Drive Cabinet s Greenheck belt drive low-profile cabinet fans, BCF, are designed for efficiency and reliability in supply, exhaust or
Merchant Network Upgrade Proposed Solution
Merchant Network Upgrade Proposed Solution Jason Connell Project Manager, Interconnection Projects Markets & Reliability Committee July 23, 2015 Presentation Approach Presentation Background Four Tariff
TOYOTA SIENNA TRAILER WIRE HARNESS Preparation
Preparation Part Number: PT791-08150 (non-se) PT791-08102 (SE only) Kit Contents Item # Quantity Reqd. Description 1 1 Trailer Module Harness 2 1 4-Flat Harness 3 1 Battery Power Wire Harness 4 1 Mounting
Product Safety Recall Takata Driver Airbag
Reference Number: N162028811 Release Date: April 2018 Revision: 04 Revision Description: Attention: This safety recall is included in the Takata Air Bag Completion Rate Improvement Program. This program
VEHICLE GRAPHICS PROGRAM
VEHICLE GRAPHICS PROGRAM VEHICLE GRAPHICS PROGRAM PROVIDED BY TKO GRAPHIX In the interest of better serving your fleet identification and graphics needs, TKO Graphix has designed a Decal Catalog that will
SERVICE BULLETIN FIREBOLT HEADLIGHTS PRODUCT PROGRAM 0501 Reason For Revision. Purpose. Kit Ordering Information. Motorcycles Affected
SERVICE BULLETIN B-076A July 10, 2008 2003-2006 FIREBOLT HEADLIGHTS PRODUCT PROGRAM 0501 Reason For Revision This revised bulletin includes corrected part information in the credit procedure tables, and
Solar Power. Michael Arnold, LEED AP. ACI-NA Environmental Committee Meetings June 27, 2011
Solar Power Michael Arnold, LEED AP ACI-NA Environmental Committee Meetings June 27, 2011 Some Reasons for Considering Solar Financial Benefit Airport Uses Energy Airport Sells Energy and/or credits Energy
AC motors IE1/IE2/IE3
1303 AC motors IE1/IE2/IE3 www.brd-klee.com Danish Design 2 Content Page Table of content 3 MS and MS2 2-pole 4 MS and MS2 4-pole 5 MS and MS2 6-pole 6 MS and MS2 8-pole 6 Basic dimensions MS/MS2 7-9 Spare
CUSTOMER SATISFACTION PROGRAM
Program Bulletin Bulletin No.: Date: 30990 April 2016 SUBJECT: CUSTOMER SATISFACTION PROGRAM Oil Pickup Tube Bolt Retention MODELS: 2016 Cadillac CTS-V Equipped with 6.2L V-8 (RPO LT4) 2016 Chevrolet Camaro
COYOTE 9.5" x 19" (292 mm x 509 mm) Dome Closure
AUGUST 2012 COYOTE 9.5" x 19" (292 mm x 509 mm) Dome Closure Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
PRICE SHEET TABLE OF CONTENTS AWWA VALVES & HYDRANTS. (PL-0418-AWWA Replaces PL-1014-VLV)
Page(s) 1 2 3 3 4 4 5 5 6 PRICE SHEET TABLE OF CONTENTS VALVES & HYDRANTS ( Replaces PL-1014-VLV) Product Line C515 NRS Gate Valves Series 1010 UL/FM C515 NRS Gate Valves Series 2010 C508 Swing Check Valves
All Toyota Dealer Principals, Service Managers, Parts Managers
To: Subject: All Toyota Dealer Principals, Service Managers, Parts Managers Warranty Enhancement Program ZE7 Certain 2007-2009 Camry Certain 2007-2011 Camry Hybrid Certain 2007-2008 Camry Solara Certain
Pneumatic Control System Kit No
MN-634 (05609) ECR 5791 Pneumatic Control System Kit No. 27225 Please read these instructions completely before proceeding with installation Failure to read these instructions can result in mis-installation
2012 (WK) Jeep Grand Cherokee SRT8
April 2013 Dealer Service Instructions for: Customer Satisfaction Notification N06 Models 2012 (WK) Jeep Grand Cherokee SRT8 NOTE: This notification applies only to the above vehicles equipped with a 6.4L
INSTALLATION INSTRUCTIONS
2588 INSTALLATION INSTRUCTIONS 3-16 ! IMPORTANT PLEASE DON T HURT YOURSELF, YOUR KIT OR YOUR VEHICLE. TAKE A MINUTE TO READ THIS IMPORTANT INFORMATION. This kit is to be used on a pickup truck only, and
TOYOTA IMPORTANT UPDATE
TOYOTA IMPORTANT UPDATE Product Support Division The attached Dealer Letter has been updated, refer to the details below. DATE February 11, 2016 TOPIC Remedy is now available for Phase 2, New York Region.
FINISHING BRANDS PAINT TANK GALVANIZED
FINISHING BRANDS PAINT TANK GALVANIZED PART NUMBERS AND SCHEMATICS GUIDE Company Profile Since 1944, Marco has developed a strong tradition of providing innovative and reliable products and services to
BLASTMASTER 250 CFM 12-VOLT DC AFTERCOOLER
BLASTMASTER 250 CFM 12-VOLT DC AFTERCOOLER PART NUMBERS AND SCHEMATICS GUIDE Company Profile Since 1944, Marco has developed a strong tradition of providing innovative and reliable products and services
GTI COMPOSITE PC CHAIRS TM
GTI COMPOSITE PC CHAIRS TM Precast Concrete Slab and Wall Panels Tilt-up Concrete Wall Panels Elevated Slabs From 3 / to 12" ( 1 / increments) Grey color Ball on foot does not damage form work Ball is
2006 PRICE LIST. PRODUCT NAME DESCRIPTION PAGE Policies Freight policy and material return policy. 1. Product Reference Table. Majestic Slate Tile
Effective June 1st 2006 PRICE LIST PRODUCT NAME DESCRIPTION PAGE Policies Freight policy and material return policy. 1 Product Reference Table Table provides weight, packaging, and installation information
Regenerative Turbine Pumps
Bulletin T June 04 T E Series Regenerative Turbine Pumps Capacities to 40 GPM Heads to 700 Feet Temperatures to 00 F MTH PUMPS MTH T E Series Close-coupled and pedestal mounted regenerative turbine pumps
BLASTMASTER 400 CFM 12-VOLT DC AFTERCOOLER
BLASTMASTER 400 CFM 12-VOLT DC AFTERCOOLER Company Profile Since 1944, Marco has developed a strong tradition of providing innovative and reliable products and services to the surface preparation and protective