Inner vessels and pipework are made of stainless steel - used for multipurpose transportation of CO2, N2, O2 and Ar.
|
|
|
- Job Miles
- 6 years ago
- Views:
Transcription
1 CO2 Storage 20 ASCO ISO Tank Containers ASCO CO2 and Cryogenic 20 ISO Tank Containers include a high quality vacuum multi-laminar super insulation and are supplied complete with all pipework, valves, safety devices, liquid level indicator, pressure gauge and optional with transfer pump and filling hoses. All tank containers are designed for transportation by road, ship and rail. The models are also available on semi-trailer and/or with tractor. Inner vessels and pipework are made of stainless steel - used for multipurpose transportation of CO2, N2, O2 and Ar. ASCO reserves the right to modify all specifications without prior notice.
2 Specifications: 1. Main Data Commodity approx l (5'191.0 gal) Gross water volume: 19'650 Max. allowed working pressure: Tare weight: Max. gross weight: Max. payload: 22 bar ( psi) approx kg (18'959.8 lb) kg (79'366.4 lb) LCO2: approx kg (43'210.6 lb) LIN: approx kg (32'959.1 lb) LOX: approx kg (46'826.2 lb) LAR: approx kg (57'606.8 lb) Tolerances: on volume 1 %, on weight 2 % Codes and regulations: Insulation: Height: Width: Overall length: ISO-corner castings: 2. Tank Inner Vessel Max. allowed working pressure: Pressure vessel code: Test and calculation pressure: ADR / RID / IMDG / (UN-T75) / UIC Vacuum with multi-layer insualtion approx mm ( in) approx mm (96.06 in) mm ( in) 20' x 8' x 8'6" ISO dimensions (508 x x mm) 22 bar ( psi) AD 2000-Regelwerk 29.9 bar (433.7 psi) Design temperature: -196 / +50 C Outer diameter: mm (86.6 in) Number of baffles: 2 Outer Vessel Design pressure: -1 bar (-14.5 psi) (full vacuum) Design temperature: -20 / +50 C Outer diameter: Overall length: mm (95.28 in) (not protruding over the frame members) mm ( in) (not protruding over the frame members) Insulation Type Materials Inner vessel of CO 2 tanks: Inner vessel of cryogenic tanks: Outer vessel: Piping: vacuum + multi-layer insulation (super insulated) Stainless steel type /EN or equivalent Stainless steel type /DIN or equivalent carbon steel S235JRG2/EN or equivalent stainless steel type 340 (L) Valves for CO 2 tanks: ball valves, stainless steel, for CO 2 Valves for cryogenic tanks Cryogenic valves 3. Frame The frame is of Beam Type, consisting 8 x 8 6 -frame at each end, connected to each end. Handling to be done by means of the corner castings only. The container can be secured by twist locks on rail and road vehicles complying to the relevant requirements of ISO 668 freight containers.
3 Lockable Machinery Compartment: All stainless steel pipework and valves neatly arranged in a lockable machinery compartment. Outside of the machinery compartment is a lockable document holder installed. Available Types: ASCO s 20 ISO Tank Containers are optionally available on semi-trailer and/or tractor. All ISO tank containers include: inner vessel made of stainless steel all pipe work made of stainless steel all valving necessary for proper operation (stainless steel ball valves for CO2 and bronze globe valves for cryogenic) all necessary safety equipment all instruments and safety lines that form part of the tank, including pressure and level gauge transfer pump and filling hoses (optional) Larger sizes also available. Please ask for details!
4 ASCO 20 ISO Tank Container Typical flow diagram for 20 ASCO ISO Tank CO 2 Container 1 Vapour balance line valve 2 Main bottom isolation valve 3 Vacuum point 4 Bursting disc vacuum jacket 5 Divertor valve 6 Safety valve 7 Instrument liquid valve 8 Instrument gas valve 9 Flange connection with blindflange (without option) 10 Fill and discharge line purge valve 11 Trycock nett capacity 95% valve 12 Vapour line purge valve 13 Level gauge balance line valve 14 Liquid gauge level 15 Pressure gauge 16 Connection fill and discharge line (flange coupling) 17 Liquid from pump delivery valve 18 Pump isolation valve 19 Pump 20 Thermal relief valve 21 Connection vapour line (flange coupling) 22 Fill and discharge valve 23 Flange connection Typical flow diagram for 20 ASCO ISO Tank Cryogenic Container 1 Vapour balance line valve 2 Bottom fill isolation valve 3 Top fill isolation valve 4 Bursting disc vacuum jacket 5 Divertor valve 6 Safety valve 7 Instrument liquid valve 8 Instrument gas valve 9 Flange connection with blindflange (without option) 10 Fill line purge valve 11 Trycock nett capacity 95% valve 12 Vapour line purge valve 13 Level gauge balance line valve 14 Liquid gauge level valve 15 Pressure gauge 16 Vacuum point 17 Flange connection with blindflange 18 Liquid to pressure build up valve 19 Pump 20 Fin vaporiser 21 Thermal relief valve 22 Pressure build up gas return valve 23 Liquid to pump fill valve 24 Pump 25 Liquid from pump delivery valve 26 Pump by-pass valve 27 Liquid from pump delivery valve 28 Bottom fill pump isolation valve 29 Coupling with plug 30 Flange connection
5 20 ASCO ISO Tank Container: Available standard capacities Pos. 001 ASCO CO 2 20 ISO Tank Container Vaccum super insulated 20 ISO tank container (UN-T75) with stainless steel inner vessel, including hose box. part no Gross water volume: approx l Max allowed working pressure: 22 bar ( psi) Tare weight: approx kg (18' lb) Max. gross weight: kg (79'36641 lb) Max. payload: approx: LCO2: kg (43' lb) Optionally available on semi-trailer and/or tractor. All ISO tank container include: inner vessel made of stainless steel all pipework made of stainless steel all valving necessary for proper operation all necessary safety equipment all instruments and safety lines that form part of the tank, including pressure and level gauge optionally transfer pump and filling hoses are available Pos. 002 Cryogenic ASCO 20 ISO Tank Container Vaccum super insulated 20 ISO tank container (UN-T75) with stainless steel inner vessel, including hose box. part no Gross water volume: approx l Max allowed working pressure: 22 bar ( psi) Tare weight: approx kg (18' lb) Max. gross weight: kg (79' lb) Max. payload: approx: LIN: kg (32' lb) LOX: kg (46' lb) LAR: kg (57' lb) Optionally available on semi-trailer and/or tractor. All ISO tank container include: inner vessel made of stainless steel all pipework made of stainless steel all valving necessary for proper operation all necessary safety equipment all instruments and safety lines that form part of the tank, including pressure and level gauge optionally transfer pump and filling hoses are available
TECHNICAL SPECIFICATION CLIENT : MCM
TECHNICAL SPECIFICATION CLIENT : MCM A SPECIFICATION NO.: TSGT0951 Rev A As Built WO 100048 DESCRIPTION : 5 x 24 500 LITRE 25,0/27,5 BAR UN PORTABLE TANK Serial Number : MCMU 527021 to MCMU 527025 1.0
Types Of Containers. Introduction. Multi Mode. Standard. The Standard International Box. Emergency Response Solutions
Emergency Response Solutions Introduction Copyright 2016 All rights reserved. Types Of Containers Dry Freight Flat Racks Open Top Tunnel Open side Double Door Refrigerated Insulated / thermal Tanks Cargo
26000 litre ISOTANK SPECIFICATION FOR HAZARDOUS CHEMICALS TRANSPORT AND STORAGE SPECIFICATION T11.
26000 litre ISOTANK SPECIFICATION FOR HAZARDOUS CHEMICALS TRANSPORT AND STORAGE SPECIFICATION T11. DESCRIPTION: 26 000 LITRE INSULATED UN PORTABLE TANK, TYPE T11 For transport of product classes 3, 4,
Specification Sheet Form Rev
Sales Administration Use Only Customer Quote Number Quote Revision Shop Order Number Serial Number(s) Date : Customer Name Salesperson Model : Salesperson Name : 8400 DDC S1 Part / Drawing Number : 730-8400
Bursting discs TECHNICAL GUIDE
Bursting discs TECHNICAL GUIDE Graphilor 3 bursting discs is a reliable & safe solution to protect pressure vessels / equipments thanks to several technical advantages : Large corrosion allowance High
CVI Valve Line. Exceeds the industry s highest standards for reliability and performance
CVI Line Exceeds the industry s highest standards for reliability and performance Available in the most standard models with the shortest lead times in the industry Exceptional quality every CVI valve
SIHI LPH-X - Liquid Ring Vacuum Pump Two Stage
- Liquid Ring Vacuum Pump Two Stage 45008, 45311, 45316 Pressure Range: Suction Volume: 33 to 1013 mbar 55 to 258 m³/h CONSTRUCTION Sterling SIHI liquid ring vacuum pumps have a simple but robust construction
Gazprom s Helium Facility in Orenburg Supply & Start-Up of a Linde Liquefier. Klaus Ohlig Twente, July 9 th, 2014
Gazprom s Helium Facility in Orenburg Supply & Start-Up of a Linde Liquefier Klaus Ohlig Twente, July 9 th, 2014 Table of Contents 1. Introduction 2. Linde s Helium Product Portfolio 3. Key Components
Pressure & Flame Protection
Pressure & Flame Protection Tank Protection Valves Tank Protection Valves Marvac manufacture an extensive range of products to protect low pressure storage tanks and vessels.these products help to prevent
Cryo Line Systems. Cold memains cold wherever you want!
Cryo Line Systems Cold memains cold wherever you want! www.cryotherm.de Flexible and rigid line systems Cryogenic liquefied gases......like nitrogen, oxygen and argon are stored in special storage vessels
Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
ISO 9001 GMP /2009
V S 1935 2000 GMP ISO 9001 7 24.04-6174500 4 9/2009 -0101G001 USP 99.0-0101G002 EP 99.5-0101G003 HP 99.999-0101G004 99.99-0101G005 EP 99.5-0101G006 99.999-0101G007 99.996-0101G008 (H2O 10 PPM max) 99.5-0101G009
SIHI LPH-X - Liquid Ring Vacuum Pump Two Stage
- Liquid Ring Vacuum Pump Two Stage LPH 45008, LPH 45311, LPH 45316 Pressure Range: Suction Volume: 33 to 1013 mbar 55 to 258 m³/h CONSTRUCTION Sterling SIHI liquid ring vacuum pumps have a simple but
Specification Sheet Doc Rev
Quote Name: Name Shop Order Number: Sales Administration Use Only Number-001 Serial Number/s: Number Date: xx/xx/xxxx CUSTOMER : Customer Name SALESPERSON : Salesperson Name MODEL : 1240 Cu. Ft. Super
APPLICATION NOTE. Mounting instructions for EasyPIM 750 and EasyPACK750 Modules with screw clamps
Date: 2003-08-12 APPLICATION NOTE Page 1 of 9 Mounting instructions for EasyPIM 750 and EasyPACK750 Modules with screw clamps 1. General information The mounting instructions outlined below are recommended
Portable. Storage and Transport Dewars. CL/CLPB Series, CH Series, CFN/CFL Series
Portable Storage and Transport Dewars CL/CLPB Series, CH Series, CFN/CFL Series CL/CLPB Series Cryofab s CL series portable liquid cylinders are intended for low-pressure transport and storage of liquid
TRUNNION MOUNTED METAL SEATED BALL VALVES
TRUNNION MOUNTED METAL SEATED BALL VALVES HIGH PERFORMANCE BALL VALVES FOR SEVERE SERVICES PROCESS VALVES STANDARD FEATURES FOR SIDE ENTRY & BOTTOM ENTRY DESIGN 1. Trunnion Mounted The ball is trunnion
Specification Sheet Doc Rev
Quote Name Name Shop Order Number Sales Administration Use Only Number-001 Serial Number/s Number Date xx/xx/xxxx CUSTOMER Customer Name SALESPERSON Salesperson Name MODEL Super Sander TM, Pneumatic -
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 22 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Valves, General 2. Gate Valves 3. Balancing Valves 4. Ball Valves 5. Swing Check Valves 6. Backflow Prevention Assemblies 7. Pressure
Water Treatment Pressure Vessel
Water Treatment Pressure Vessel We manufacture tank only Water Treatment Pressure Vessel NOYI Environmental Equipment Manufacturing (Beijing) Co., Ltd. was founded in 2011. The company designs, manufactures
LPG ROAD TANKERS & ISO TANK CONTAINERS FOR SAFE TRANSPORTATION AND DISTRIBUTION OF LPG
LPG ROAD TANKERS & ISO TANK CONTAINERS FOR SAFE TRANSPORTATION AND DISTRIBUTION OF LPG COMPANY Kadatec is European manufacturer of LPG storage tanks, road tankers, ISO tank containers and LPG equipment,
548 hydraulic separator
hydraulic separator 120 C 120 105 C 105 120 Serie 548 120 C 105 C 105 548 imensions C B Function The ltecnic 548 hydraulic separator combines several different components, each of which performs a specific
ARI-FABA -ANSI LongLife Stop valve with bellows seal
Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -ANSI LongLife - Class 150 Straight through with flanges German TA - Luft TÜV-Test-No. 088-945053
Dry Bulk Super Sander Trailer Specification Sheet
Quote Name: Name Shop Order Number: Sales Administration Use Only 417464-001 Serial Number/s: 700287-700346 Date: Date: xx/xx/xxxx CUSTOMER : Olsta/PneuTech Stock SALESPERSON : MODEL : Super Sander TM,
Specification Sheet Doc Rev
Quote Name: Name Shop Order Number: Sales Administration Use Only Number-001 Serial Number/s: Number Date: xx/xx/xxxx CUSTOMER : Customer Name SALESPERSON : Salesperson Name MODEL : 1611 Cu. Ft. Super
Crosby Style JQ pressure relief device
A combination pressure relief device designed with internal parts completely isolated from corrosive fluids and environments Features Designed in collaboration with the Chlorine Institute, Inc. Provides
> THE A.P. MOLLER - MAERSK GROUP CONTAINER EQUIPMENT GUIDE
CONTAINER EQUIPMENT GUIDE > THE A.P. MOLLER - MAERSK GROUP Maersk Line is part of the A.P. Moller - Maersk Group, which has 70,000 employees in more than 125 countries around the world. Comprising container
Safety Relief Valves Commanche Techmatic Controls
Safety Relief Valves Commanche Techmatic Controls Product description Material Properties Connection W. Pres (Bar) W. Temp ( ) 1. Commanche-317 ISO 9001 (DN 12-50) SV-B27 Bronze Without lever Threaded
Valves, controllers + systems Double regulating and commissioning valves Hydrocontrol F cast iron, PN 16
Valves, controllers + systems Double regulating and commissioning valves Hydrocontrol F cast iron, PN The Oventrop Quality Management System is certified to DIN-EN-ISO 9001 Technical information Application:
Sealless magnetic coupled centrifugal pump Type NMR Design with heavy duty oil lubricated bearing bracket. our. contribution for
Sealless magnetic coupled centrifugal pump Type NMR Design with heavy duty oil lubricated bearing bracket our contribution for environmental protection GENERAL DICKOW-pumps of series NMR are sealless centrifugal
NK40-160/172A1F2AE-SBAQE
GRUNDFOS DATA BOOKLET NK4-16/172A1F2AE-SBAQE Grundfos pump 9782923 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nkbasis/9782923/nk-4-16-172-a1-f-a-e-baqe.html
TOSACA. Catalogue
Catalogue 2016-1 INDEX / INDICE 1216 1400 EN/DIN flanges 1216 pag. 2 1216 HP pag. 3 1400 pag. 6 1216 C pag. 4 1216 B pag. 5 1400 LP pag. 8 1415 ASME flanges Accesories 1415 pag. 9 1415 LP pag. 11 pag.
Series PRODUCTS. self-priming Horizontal screw pump for non lubricating liquids. Water. Seawater. Heavy fuel oils. Bilge/Ballast pumps
self-priming Horizontal screw pump for non lubricating liquids PRODUCTS Water Seawater Oils Heavy fuel oils Light products Labelling Bilge/Ballast pumps General service pumps Cargo pumps Transfer pumps
Contents. Identification
Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions
ENGINEERING STANDARD FOR MACHINERY PIPING
ENGINEERING STANDARD FOR MACHINERY PIPING CONTENTS : PAGE No. 0. INTRODUCTION... 2 1. SCOPE... 3 2. REFERENCES... 3 3. UNITS... 4 4. PIPING DESIGN FOR MACHINERIES... 4 4.1 General... 4 4.2 Pumps... 5 4.3
Crosby Style JQ Pressure Relief Device. Flow Control
Designed in collaboration with the, Inc. the Crosby JQ is designed with internal parts completely isolated from corrosive fluids and environments. The Crosby Style JQ pressure relief device was designed
APIFLO-M series Series
APIFLO-M series Series Horizontal Multistage Pump According to API610 Capacity: up to 650m 3 /h (50Hz) up to 780 m 3 /h (60Hz) Head: up to 1200m (50Hz) up to 1728 m (60Hz) Pressure: APIFLO-M: up to 25
Si Engineering GREAT Solutions. Process and steam safety valves to PED and DIN/EN standards
Engineering GREAT Solutions Process and steam safety valves to PED and DIN/EN standards Si 4302 Features Engineered with high discharge The state-of-the-art IMI Bopp & Reuther medium-pressure safety valve:
TECHNICAL DATA OBSOLETE
March 21, 2008 Foam 180a 1. DESCRIPTION The Viking bladder tank consists of an inner tank (bladder) fabricated of a flexible material (Buna-N over nylon) and an outer tank fabricated from carbon steel.
SAFETY relief VALVE SERIES # 006 DESIGN FEATURES HARSHAD ENGINEERING WORKS HARSHAD ENGINEERING WORKS TECHNICAL DATA : ISO 9001 CERTIFIED COMPANY
PROVIDES HIGH QUALITY OVERPRESSURE PROTECTION FOR AIR, GAS, LIQUID & STEAM IN SINGLE STANDARDIZED DESIGN SAFETY relief VALVE DESIGN FEATURES SAFETY VALVE MANUFACTURED IN ACCORDANCE WITH REQUIREMENT OF
HTM Circulation Pumps acc. to DIN EN 733 Type NKLs
HTM Circulation Pumps acc. to DIN EN 733 Type NKLs General The DICKOW standard HTM pumps, series NKLs according to EN 733, are designed as centrifugal pumps of light duty for handling heat transfer media.
Valves, controls + systems Cast iron double regulating/ commissioning valves PN 16 Hydrocontrol G
The Oventrop Quality Management System is certified to DIN-EN-ISO 9001 Application: Oventrop double regulating and commissioning valves Hydrocontrol G are installed in the pipework of hot water central
Company name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 13/03/2017
Position Qty. Description 1 NB 1-31/29 A-F2-B-E-BAQE Phone: 4 84 61 Date: 13/3/217 Product No.: On request Non-self-priming, single-stage, centrifugal volute pump designed according to ISO 199 with dimensions
Ford Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
Crosby Style JQ pressure relief device
A combination pressure relief device designed with internal parts completely isolated from corrosive fluids and environments Features Designed in collaboration with the Chlorine Institute, Inc. Provides
Three-Way Metal Seated Ball Valve Type 21-M
Three-Way Metal Seated Ball Valve Type 21-M Design Characteristics Split body Trunnion mounted ball with - or T-port and integral stem ive loaded stem packing Spring loaded seat system Fire Safe design
Sealless Magnetic Coupled Hot Oil Circulation Pumps acc. to DIN EN / ISO 2858 Type NMWR / NMWB / NMW. our. contribution for
Sealless Magnetic Coupled Hot Oil Circulation Pumps acc. to DIN EN 22858 / ISO 2858 Type NMWR / NMWB / NMW our contribution for environmental protection General DICKOW pumps of series NMWR / NMWB / NMW
SRG LPG Liquid Service/Offtake Valve Type /
SRG LPG Liquid Service/Offtake Valve Type 480-426 / 480-427 Inlet Connection Outlet Connection Width across flats ¾ NPT 1 ¼ NPT M26x1,814 36 mm 46 mm Product Description: The SRG type 480 liquid service
Instrumentation & Piping valves
Instrumentation & Piping valves Monoflange valves Plug valves Large bore ball valves Injection & sampling valves Double block & bleeds Various instrumentation valves DELIVERY PROGRAM www.imperialvalve.nl
NARVIK-YARWAY. High Pressure Level Gauges, Model: 17
NARVIK-YARWAY Narvik-Yarway covers requirements for level gauges and electronic water level systems with a wide range of models, sizes and materials to satisfy all the specifications of the power and process
TANKERS FOR TRANSPORT OF LPG
TANKERS FOR TRANSPORT OF LPG TANKERS FOR TRANSPORT OF LPG Semi-trailer tankers or truck-mounted tanks with the option of complete transfer equipment for LPG transport and supply. Lapesa LPG tanks, with
Cryogenic valves. Inspired By Challenge
Inspired By Challenge Floating Ball Valves General 3 iece Flanged High pressure ultiport Ordering code system Introduction Under extremely low temperatures and in the harshest of environments, Habonim
Specification Sheet Doc Rev
Quote Name: Name Shop Order Number: Sales Administration Use Only Number-001 Serial Number/s: Number Date: xx/xx/xxxx CUSTOMER : Customer Name SALESPERSON : Salesperson Name MODEL : J&L 1850 Model Vacuum/Pneumatic
megaflo BSP Pressure Relief Vent
Pressure RELIEF VENTS PRV s SECTION 2 When it comes to pressure/vacuum protection, Girard has been putting their name and reputation on the line every day for close to 60 years. We start with only the
GW MKIII DELUGE VALVE - ALUBRONZE EXTERNAL RESET, PNEUMATIC
Jacking Bolts Outlet Connection to Release (dry pilot line) Connection to Alarm Line ANGUS GW DELUGE VALVE VALVE 2 Drain Port Note: All Other Connections ½ Inlet External resetting of clapper via hand
RUBBER BELLOWS TYPE 1A & 1S SERIES
RUBBER BELLOWS TYPE 1A & 1S SERIES Description: Vibracoustics Ltd Reiflexa Bellows are made from various elastomers reinforced with high tensile textile or steel cords to provide the flexible elements
T E C H N I C A L S P E C I F I C A T I O N
11547 T E C H N I C A L S P E C I F I C A T I O N 3-AXLE HEAVY-DUTY LOW-BED SEMITRAILER Custom-made in Germany Type: 8096-BPW Payload: approx. 80 ton Heavy duty off-road low bed semi-trailer for the safe
DOUBLE ECCENTRIC SOFT-SEATED Flanged and Semi-Lug Type
DOUBLE ECCENTRIC SOFT-SEATED Flanged and Semi-Lug Type MANUFACTURED BY Fire Safe LPG Page 1 Description LPG Specification : GVC - ACE Valve LPG Double Eccentric Soft Seated butterfly valve suitable low
UNIT TAG: TYPE OF SERVICE: SUBMITTED BY: APPROVED BY: ORDER NO.: UP B5. Circulator pumps. Motor Data Flow: Head: Efficiency: Pump Data
Submittal Data PROJECT: REPRESENTATIVE: ENGINEER: CONTRACTOR: UNIT TAG: TYPE OF SERVICE: SUBMITTED BY: APPROVED BY: ORDER NO.: UP 15-18 B5 Circulator pumps QUANTITY: DATE: DATE: DATE: Product photo could
OPTIMASS 3000 Technical Datasheet
OPTIMASS 3000 Technical Datasheet Sensor for mass flow First choice for low flow applications Certified secondary pressure containment A common footprint for all three sizes, in Hastelloy or Stainless
XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS BOLTS: Six 6mm grade 12.9. PLUNGERS: A special thick solid ceramic for
ISO INTERNATIONAL STANDARD. Liquid hydrogen Land vehicle fuel tanks. Hydrogène liquide Réservoirs de carburant pour véhicules terrestres
INTERNATIONAL STANDARD ISO 13985 First edition 2006-11-01 Liquid hydrogen Land vehicle fuel tanks Hydrogène liquide Réservoirs de carburant pour véhicules terrestres Reference number ISO 13985:2006(E)
SIGRAFLEX UNIVERSAL. Gasket Sealing Sheet made from Impregnated Graphite with Tanged 316L Stainless Steel Reinforcement. Quality first solutions
SIGRAFLEX UNIVERSAL Gasket Sealing Sheet made from Impregnated Graphite with Tanged 316L Stainless Steel Reinforcement Quality first solutions www.agaus.com.au Page 2 of 7 Sigraflex Universal is a High
DUAL FUEL (DIESEL/LPG) SYSTEM OVERVIEW
DUAL FUEL (DIESEL/LPG) SYSTEM OVERVIEW The GRA Dual Fuel system is a performance product designed to produce optimum power and torque by combusting LPG and Diesel simultaneously in the engine. The GRA
Horizontal Pre-Piped Bladder Tanks with Proportioner
DATA SHEET Horizontal Pre-Piped Bladder Tanks with Proportioner Features Pre-piped configurations with a wide selection of proportioner sizes, including the ANSUL FLOWMAX CL for closed-head sprinkler systems
PRESSURE RELIEF / SUSTAINING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE RELIEF / SUSTAINING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART
The Modular System SIHI ISOchem
The Modular System SIHI ISOchem Description Standard chemical pumps of the SIHI ISOchem range are horizontal single-stage volute casing pumps with dimensions to ISO 2858 / EN 22858. They meet the technical
Know-how makes the difference. High performance. Ball Valves
Know-how makes the difference High performance Ball Valves With Dansk Ventil Center as your business partner, you are always guaranteed a wide and well sorted product range and a unique technical know-how
Trailer Off-Loading Pumps
Trailer Off-Loading Pumps Top Series Trailer Off-Loading Pumps Bearing Housing Oil Fill/Speed Pick Up Uses Hydrocarbon or Oxygen compatible oil Designed in compliance with CGA G-4.7 and EIGA/IGC 148/08/E
Precision Air Drilling Services Equipment Information & Specifications
Equipment Information & Specifications Joy Super Booster Specifications Joy WB-12 5000 Specifications Page 2 of 10 Table of Contents Joy Super Booster Specifications... 2 Joy WB-12 5000 Specifications...
Vertical Pre-Piped Bladder Tanks with Proportioner
DATA SHEET Vertical Pre-Piped Bladder Tanks with Proportioner Features Pre-piped configurations with a wide selection of proportioner sizes, including the ANSUL FLOWMAX CL for closed-head sprinkler systems
our contribution for environmental protection Sealless magnetic coupled centrifugal pumps acc. to EN Type NML / NMB
Sealless magnetic coupled centrifugal pumps acc. to EN 22858 our contribution for environmental protection Type NML / NMB General Magnetic coupled DICKOW-pumps of the series NM are sealless pumps. The
Model MTB-ASME Vertical Pre-Piped Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Pre-Piped Bladder Tanks Features n Pre-piped configurations with a wide selection of proportioner sizes, including the SKUM TPW-150 MK2 for closedhead sprinkler systems
NOTOS Multi Screw Pumps. High Efficiency and Unique Design
NOTOS Multi Screw Pumps High Efficiency and Unique Design NOTOS MULTI SCREW PUMPS 3 ranges for all applications Since 1979 NETZSCH has been manufacturing multi screw pumps to serve a wide range of industries
SE M.C.N.51D
GRUNDFOS DATA BOOKLET SE1.110.200.200.4.52M.C.N.51D Grundfos pump 98179813 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/seslfam/98179813/se1-110-200-200-4-52m-c-n-51d.html
CM5-5 A-R-A-E-AVBE C-A-A-N
GRUNDFOS DATA BOOKLET CM5-5 A-R-A-E-AVBE C-A-A-N Grundfos pump 9686813 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/9686813/cm5-5-a-r-a-e-avbe.html
SEA CONTAINER SPECIFICATIONS
SEA CONTAINER SPECIFICATIONS 20 Dry Container Specification Suitable for commodities in bundles, cartons, boxes, loose cargo, furnitures, etc. Width 2,352 mm 7ft 8.6 in Interior Height 2,395 mm 7 ft 10.3
2014 HEIL DOT407AL 9240GL, DOUBLE CONICAL, TANDEM AXLE, CRUDE OIL TRANSPORT WITH PUMP & CENTRIFUGE NV1309 VIN: 5HTDL4527D7H45530
2014 HEIL DOT407AL 9240GL, DOUBLE CONICAL, TANDEM AXLE, CRUDE OIL TRANSPORT WITH PUMP & CENTRIFUGE NV1309 VIN: 5HTDL4527D7H45530 VESSEL 1) Design Two piece barrel, 5454-H32 aluminum alloy for shell. 5454-0
Model MTB-ASME Horizontal Pre-Piped Bladder Tanks
DATA SHEET Model MTB-ASME Horizontal Pre-Piped Bladder Tanks Features n Pre-piped configurations with a wide selection of proportioner sizes, including the SKUM TPW-150 MK2 for closedhead sprinkler systems
Crosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control
Crosby s Series 800 adjustable blowdown and Series 900 fixed blowdown OMNI-TRIM full nozzle pressure relief valves have a simplified, single trim design with superior application versatility. Features
OPERATING INSTRUCTIONS & SERVICE MANUAL BLUE MAX II HYDROSTATIC TEST PUMP
PAGE 1 OF 10 OPERATING INSTRUCTIONS & SERVICE MANUAL BLUE MAX II HYDROSTATIC TEST PUMP EFFICIENT, EASY OPERATION Air operated pump Wide range of pressures and volumes Easy to operate controls Output pressure
ID & IP SERIES IN-LINE DISC AND PISTON VALVES
ID & IP SERIES IN-LINE DISC AND PISTON VALVES IN-LINE DISC AND PISTON VALVES M SEAL IN-LINE PISTON VALVE CODE: IPYM Large valves utilize a non-rising stem to minimize overall length Live loaded packing
PRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE
PROJECT NAME LOCATION PRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 2-1/2 in. (65 mm) through 18 in. (450 mm) Control
Specification Sheet Form Rev
10000 CDC S1 Sales Administration Use Only Quote Number Quote Revision Shop Order Number Serial Number(s) Date CUSTOMER SALESPERSON MODEL : Customer Name : Salesperson Name : 10000 CDC S1 PART NO./DRAWING
PISTON ACCUMULATOR. Installation and operation manual Revision
PISTON ACCUMULATOR Installation and operation manual Revision 2014-4 Content 1.0 INTRODUCTION 4 2.0 GENERAL SAFETY INSTRUCTIONS 5 3.0 WARRANTY 6 3.1 Limitation of the liability 6 4.0 TECHNICAL SPECIFICATIONS,
Double regulating and commissionig valves Hydrocontrol F cast iron, PN 16 Hydrocontrol FR bronze, PN 16 Hydrocontrol FS nodular cast iron, PN 25
Hydrocontrol FR bronze, PN 16 Hydrocontrol FS nodular cast iron, PN 25 The Oventrop Quality Management System is certified to DIN-EN-ISO 9001 Technical Information Application: Oventrop double regulating
ALTITUDE CONTROL VALVES FOR ONE WAY FLOW
PROJECT NAME LOCATION ALTITUDE CONTROL VALVES FOR ONE WAY FLOW INTRODUCTION This specification covers the design, manufacture, and testing of 2 in. (50 mm) through 36 in. (900 mm) Control Valves PART 1
our contribution for Sealless Magnetic Coupled Multistage Centrifugal Pumps Type HZM / HZMR / HZMB environmental protection
Sealless Magnetic Coupled Multistage Centrifugal Pumps Type HZM / HZMR / HZMB our contribution for environmental protection General DICKOW-pumps of series HZM are sealless multistage horizontal centrifugal
FLEXWOUND METALLIC AND SEMI METALLIC GASKETS
FLEXWOUND METALLIC AND SEMI METALLIC GASKETS PRODUCT DESCRIPTION FMI metallic gaskets are specifically designed to withstand extreme temperatures and pressures, combined with chemical exposure. Available
Specification Sheet Doc Rev
Quote Name: Name Shop Order Number: Sales Administration Use Only Number-001 Serial Number/s: Number Date: xx/xx/xxxx CUSTOMER : Customer Name SALESPERSON : Salesperson Name MODEL : 1625 Cu. Ft. Model
Hopkinsons CONTENTS SCHEDULE OF SHELL BOILER MOUNTINGS. Hopkinsons. Safety Valves 5. Boiler Stop Valves 17. Feed Check Valves 18. Blowdown Valves 20
Hopkinsons SCHEDULE OF SHELL BOILER MOUNTINGS Quality assurance Weir Power & Industrial operates quality programmes to cover the full scope of their activities. Comprehensive quality systems have been
POLYPROPYLENE PUMP TUBE SP-PP SERIES
POLYPROPYLENE PUMP TUBE SP-PP SERIES * * * 0 * V-seal - Viton Pump coupling Drive shaft, " (00 mm) Discharge housing Bearing unit assembled - each Viton shielded bearings, spacer, snap ring, bearing can
Quality, Safety and Environment
Quality, Safety and Environment Global Valve Center B.V. is an independent, internationally operating, modern, flexible and service-oriented organization with over forty years of experience and expertise
FGMDLPG-1 Flow Meter FGMDLPG-1 flow meter is made by cast Aluminum, small size, light weight, used in Liquid Gas Dispenser. Max 5~60L Discharge rate per revolution : 0.5L/r Adjustable Minimum Volume: 0.001
TP /2-A-F-A-BAQE 400D 50HZ
GRUNDFOS DATA BOOKLET TP 32-38/2-A-F-A-BAQE 4D 5HZ Grundfos Pump 968677 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tp/968677/tp-32-38-2-a-f-a-baqe.html
Series E4F E5F
Three Phase Induction Motors With Rotors Wound for Hoists Series E4F 160-315 E5F 355-400 ASI NT 003.1 I N D E X Use 2 Electrical Tolerances 9 Mechanical Tolerances 9 General Characteristics 2 Technical
Packaged Pump Sets FOR DIESEL FUEL OIL APPLICATION. Packaged Pump Sets for Diesel/Fuel Oil Application Page 1
Packaged Pump Sets for Diesel/Fuel Oil Application Page 1 Packaged Pump Sets FOR DIESEL FUEL OIL APPLICATION Packaged Pump Sets for Diesel/Fuel Oil Application Page 2 Description Simplex SPS Series Packaged
Hydrocontrol VFC cast iron, PN 16 Hydrocontrol VFR bronze, PN 16 Hydrocontrol VFN nodular cast iron, PN 25 Double regulating and commissioning valves
Hydrocontrol VFC cast iron, PN 16 Hydrocontrol VFR bronze, PN 16 Technical Information Application: Oventrop double regulating and commissioning valves Hydrocontrol VFC/VFR/VFN are installed in the pipework
PROFESSIONAL GRADE FUEL TRANSFER PUMPS CATALOG
PROFESSIONAL GRADE FUEL TRANSFER PUMPS 2014-15 CATALOG ENGINEERED TO DELIVER Extended Duty Cycles PRO20-012 Get more done in less time with the powerful PRO20-012 Extended Duty Cycle exceeds the industry
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of