New Zealand. Punches well above its weight. Series II Expander with Super Pro Base. (Optional Safety Guarding not shown)

Transcription

1 New Zealand Punches well above its weight Series II Expander with Super Pro Base (Optional Safety Guarding not shown)

2 PRODUCT UPDATES Series I - RANCHER Multi-Shift Base 20 Side Shift and 6 Back Shift - available on Series II only MULTI-SHIFT BASE - Footprint of Strike Zone RANCHER mm Side Shift 150mmn Back Shift Fastest placement of post on any postdriver - 60 posts per hour < Multi-Shift Open Position mm Side Shift Feature - Closed Position Floats Like a Butterfly, Stings Like a Bee Terminator Base Converts Rear-mount to Side-mount TERMINATOR BASE - Footprint of Strike Zone Series I - Rotation Angles 900mm Side Shift All fencing tools fit on the Base 500mm Back Shift with Series II Side Shift 5 cu.ft Tool Box Level holder, Jenny holder, Spade holder and Rammer holder Towball Hitch standard 900 Foot Print Series with 500 Side Shi & Terminator Bas Standard 900mm Side Shift Series III Base Series III Side Mount base Contractor Specific Base 900mm Side Shift 600mm Back Shift Back Shift Optional Fits all Series III Beams Open 900mm Side Shift Position > Standard 3 bank hydraukic valve Series I Rear Mount (Safety Guarding Optional) SERIES III BASE - Footprint of Strike Zone Series IV Base Series IV Side Mount base Contractor Specific Base 600mm Side Shift 200mm End Shift Rear or side operation Stable operation in any position Most compact postdriver on the market Whole operation fits inside tractor wheels Base takes a Series II and Series II Expander Gets into any awkward position Transport width 2.15m SERIES IV BASE - Footprint of Strike Zone Open 900mm Side Shift Position Series IV Base caption to come The postdriver that is easy and simple to operate but does a perfect job driving up to a 3.5m post. Bruce Watt Lifestyle Farmer, AUCKLAND, NZ Kinghitter Rancher Series 1 - Standard 3 bank hydraulic valve 3 Point Linkage - Rear Mounted Single Flange Beam Tailor-made for economical Fencing & General Farm Work Ideal for Farmers & Ranchers Mounts to Tractors, Skid Steer Loaders and Barges/Pontoons Drives up to 200mm dia. Posts Standard 205kg Weight Freestanding in most conditions Standard Post Cap Standard Safety Bracket Main Pivot Pin Series 1 Optional Extras Safety Guard Hydraulic Top Link Hydraulic Angle Adjustment Side Mount Frame T Post Holder and 7.3cm Oil Pipe Holder (No or Pilot Auger available for this model)

3 Series ii - HD BEAM Series ii - EXPANDER Heavy Duty Beam 4.25m Beam 4.88m Beam Expander 3.1m to 5.1m Mast Packs the Professional Punch For its height, punches well above its weight Series II Rear Mount - Rotation Angles Skid Steer Mounted - Closed Position King Country Multi-Shift Base with Series II Post Driver - 500mm side shift / 150mm end shift The expander is great to get in and out of places and the rock spike a must. Now I can go anywhere and drive a post into anything. Including Optional Safety Guards Shown with Optional Safety Guards Shown with Optional Safety Guards Series II Mounted on Terminator Base Series II Rear Mount Series II Expander in Post Driving Position Series II Expander Rear Mounted with Guarding & Auger The Kinghitter is a true workhorse. The postdriver that can be relied upon in all conditions and situations. Dave Currie Fencing Contractor, FEILDING, NZ Kinghitter Series II - Kinghitter Series II m Beam Optional Hinged Mast Kinghitter Series II m Beam Optional Hinged Mast 3 Point Linkage Rear Mounted The World s Finest Post Driver with Double Thickness Steel on the Main Beam / Proven World Over Suitable for Construction Sites Ideal for Farmers, Ranchers, Vineyards, Contractors, Freeway Construction Mounts to Tractors, Skid Steer Loaders, Excavators, Back Hoes, Barges, Pontoons Drives up to 300mm dia Posts Standard 250kg Weight Standard Safety Weight Stop Freestanding in most conditions Standard Heavy Duty Safety Post Cap Series II Optional Extras Hammer Weights: 205kg, 227kg, 250kg, 272kg Safety Guarding & Interlocked Operating Controls Pilot Auger Kit Post Cap Combo Auger Unit 500mm Side Shift Multi-Shift Base. (This also can be purchased with a 150mm Back Shift as well) Terminator Base 900mm Side Shift. This makes a Series II Side Mounted. Series IV Base Super Side Shift 500mm Side Shift Ram Series II Expander with Optional Safety Guarding & Auger Kinghitter Series II Expander 3.1m to 5.1m Expanding Mast Telescopic Mast Closed Position 3.1m - Open Position 5.1m 3 Point Linkage Mounted Mounts to Tractor, Skid Steer, Loader, Excavator, Barge & Pontoon Safety Hammer Lock Orkot Slides on Hammer & Postcap Storage and Transport Height - 3.1m Hammer Weight: 340kg Kinghitter Series II Expander - Optional Extras Safety Guarding & Interlocked Operating Controls Pilot Auger Kit Post Cap Combo Auger Unit 500mm Side Shift Multi-Shift Base. (This also can be purchased with a 150mm Back Shift as well) Terminator Base 900mm Side Shift. This makes a Series II Side Mounted. Series IV Base Super Side Shift 500mm Side Shift Ram

4 Series iii - HD BEAM 19 new safety features Heavy Duty Beam 4.25m Beam 4.88m Beam The Heavyweight Not for the Light- Hearted A Post Driver that is built for a fencing contractor. It can be used anywhere, and has an excellent range of usable accessories, especially the Rock Spike. Andrew Fleury Fencing Contractor, TAIHAPE, NZ Kinghitter Series III 3.8m, 4.25m, 4.88m Beam Optional Hinged Mast (all models) 3 Point Linkage Side Mounted The World s Finest Post Driver with Double Thickness Steel on Main Beam Ideal for Farmers, Ranchers, Vineyards, Contractors, Freeway Construction Mounts to Tractors, Skid Steers, Back Hoes Standard 450mm Hydraulic Side Shift Drives up to 300mm dia Posts Standard 250kg Weight Standard Safety Weight Stop Standard Heavy Duty Safety Post Cap Series III Optional Extras Safety Guarding & Interlocked Controls Hydraulic Pilot Auger Hydraulic Rock spike Combo Spike Auger Unit Orchard Base 1.755m width Series III Side Mount - 450mm side movement have 19 NEW Safety Features added to Kinghitter Series II, II Expander, III and III Expander to ensure maximum protection for the operator. In addition to these please read the Committed to safety first on the back of this brochure. Pictured: Series III with Terminator Base Side Shift & Optional Safety Guards 1 Weight stop - included for safety operator 2 Hydraulic Hoses - have a safety factor above 4:1 3 Retaining Plate - on main swivel pin 4 Wire Rope - has swaged end on lifting the hammer 5 Rubber Sleeve - protects rope, bolt and collar 6 Safety Signs - positioned on both sides warning operator of serious safety risks 7 Information - on the total (mass) weight of the post driver on mast 8 Operating Instructions and practical hints with postdriver - supplied in water proof receptacle 9 Up and Down Lever - orientated differenly from other levers 10 Valve Bank Handle Guard 11 Main Guard travels up and down with Post Cap - keeping hands out above and below strike zone 12 Guards - to prevent hands contacting with nip points on wire rope 13 Guard - to protect body from broken posts while ramming 14 All Controls - are clearly identified 15 All Control Levers - return to neutral when released 16 Extra Hydraulic Control Lever - keeps both hands out of strike zone while operating 17 Interlock Lever - hydraulic control lever to control the drop speed of weight in operation 18 Free Standing Leg - on hard surface 19 Safety Bolt - in bottom link arms. Prevents post driver falling on operator if top link fails. Series iii - EXPANDER ACCESSORIES EXPANDER 3.1m to 5.1m Mast Optional Accessory Kinghitter Series III Expander 3.1 to 5.1m Expanding Mast Telescopic Mast Closed Position 3.1m - Open Position 5.1m 3 Point Linkage Mounted Mounts to Tractor, Skid Steer, Loader, Excavator, Barge & Pontoon Standard 450mm Hydraulic Side Shift Safety Hammer Lock Orkot Slides on Hammer & Postcap Storage and Transport Height - 3.1m Kinghitter Series III Expander - Optional Extras Safety Guarding & Interlocked Controls Hydraulic Pilot Auger Hydraulic Rock spike Combo Spike Auger Unit Series III Expander (Compulsory Safety Guards) Inset: Safety Cap Drives 65mm - 90mm - 130mm High Tensile Steel Spike. Punches through Rocks, concrete, frozen ground prior to posting. Working Position 8.13 Tonne Extraction Lift to remove driven spike for ground, leaving Pilot Hole. Working Position 8.13 Tonne Extraction Lift to remove driven spike for ground, leaving Pilot Hole. Combination Unit Assists with downward pressure when drilling through Limestone, Sandstone, Ironsand and solid heavy clay. 50mm - 250mm holes. Combo. Unit Working Position 6 Tonne Down Pressure Tungsten tip 50mm - 250mm Augers. Hinged Mast Eliminates time wastage when confronted with height restrictions & assists with storage. Optional on 4.25MTR & 4.88MTR Beams. Standard on Australian 4.25MTR & 4.88MTR. Series 2 & Series 3 Models. Safety Post Cap The unique holding system that makes hands free post driving super safe. Pilot Auger 205kg - 250kg Down Pressure 50mm - 250mm Auger Capacity T-Post, Oil Pipe, Warratah & Road Marker Post Holder Prevents light posts from buckling under impact. Safety Guard Inset: Folded Back Supplied as an optional extra to comply with local bylaws. *Standard on all Australian Models.

5 SPECIFICATIONS Series I Series II Series III II EXPANDER III EXPANDER MOUNTING Category II Category II Category II Category II Category II MAST LENGTHS 3.8m 3.8m, 4.25m, 4.88m 3.8m, 4.25m, 4.88m 3.1m to 5.1m 3.1m to 5.1m HINGED MAST N/A Optional on m Optional on m N/A N/A HAMMERS 205kg 205kg to 272kg 205kg to 272kg 340kg 340kg IMPACT AT FULL STROKE 3.8m 80,000 PSI 3.8m 80,000 PSI 3.8m 80,000 PSI 3.1m-5.1m 100,000 PSI 3.1m-5.1m 100,000 PSI TILT FRONT / BACK 10 / / / / / 30 TILT SIDE / SIDE 20 / / / / / 40 LEGS Fixed Adjustable Adjustable Adjustable Adjustable TOP LINK N/A Hydraulic Hydraulic Hydraulic Hydraulic ANGLE ADJUSTMENT Manual Hydraulic Hydraulic Hydraulic Hydraulic SIDE SHIFT N/A Yes/Optional 450mm Yes/Optional 450mm Standard Hydraulic Standard Hydraulic SAFETY POST CAP Standard Standard Standard Standard Standard SAFETY GUARD Optional Optional Optional Optional Optional SAFETY HAMMER LOCK Standard Standard Standard Standard Standard MAX. POST HEIGHT 3.1m post 3.1m post 3.1m post 4.25m post 4.25m post MIN, HYDRAULIC PSI 1800 PS 1800 PSI 1800 PSI 2200 PSI 2200 PSI VOLUME OIL / MIN. AV 6 GPM 8 GPM 8 GPM 10 GPM 10 GPM STORAGE HEIGHT 3.8m 3.8m 3.1m 3.1m SHIPPING WEIGHT (Guide only) 440kg 637kg 1,035kg 925kg 1,302kg SHIPPING VOLUME From 18 cu.ft From 21 cu.ft From 46 cu.ft From 66 cu.ft From 85 cu.ft PILOT AUGER KIT N/A Yes/Optional Yes/Optional Yes/Optional Yes/Optional ROCK SPIKE EXTRACTOR N/A Yes/Optional Yes/Optional Yes/Optional Yes/Optional ROCK SPIKE COMBO N/A Yes/Optional Yes/Optional Yes/Optional Yes/Optional AUGER UNIT TERMINATOR BASE N/A Yes/Optional No Yes/Optional No 900mm SIDE SHIFT MULTI SHIFT BASE N/A Yes/Optional No Yes/Optional No 150mm BACK SHIFT 500mm SIDE SHIFT SERIES IV BASE N/A Yes/Optional No Yes/Optional No Kinghitter The Right Tool for the Right Job Series II - Construction, Farming, Ranches, Game Fencing, Hire Company, Skid Steer Loaders, Retaining Walls Series III - Orchards, Fencing Contractors, Freeway Guard Rails, Vineyards, Game Fencing, Farming Ranches Expander SII & SIII - Great for transporting on trucks, Contractors, Councils, Construction Sites, Under Trees - Stony Rocky Conditions, Pilot hole stops posts being damaged, leaving tighter construction Combo Auger - 500kg Down Pressure, Limestone, Sandstone, Iron Sand, Heavy Clays Pilot Auger - 250kg Down Pressure, Limestone, Sandstone, Heavy Clays Postcap - Shelf rock and hard conditions. Required when using Orchard Base - Series 3 fits down 2m rows. Also can be used on Skid Steer Loaders, Guard Rail Construction Kinghitter Post Drivers - Committed to Safety 1st Optional Safety Guarding with Interlocking Operating Controls Study the Operators Manual, Watch the Assembly & Safety Video, and follow the instructions on the Safety Decal Offset controls lets the operator stand safely to the side of the driver Post Cap guides the post correctly & protects the operator from impact Never stand in front of the driver, always stand to one side of the post being driven Use the correct Post Cap or T Post holder to hold the post. Change the valve to suit open or closed centre hydraulics Always check for underground and overhead obstacles (wires, pipes etc...) Make sure all legs are positioned firmly on the ground Never use the maximum force of the driver until you are sure the post is being driven straight Keep hands away from the top of the post at all times. Use the right horse power tractor unit to suit the driver. Do not operate the post driver for other uses. Use caution when driving small diameter wood and steel posts. Wear appropriate Safety equipment (Ear Muffs, Safety Glasses, and Hard-Hat). Consider the operating environment (steep slopes can cause roll overs). DISTRIBUTED BY INDUSTRIES LIMITED. 9 Bay Park Place, Beachhaven, 0626 Auckland, New Zealand Phone: , Fax: sales@fairbrother.co.nz Web: awaylaughing