TECHNICAL DATA AND INFORMATION. 128 kw/171 hp t. up to 13.7 m SCRAP RECYCLING MACHINE WITH QUICK CONNECT MHL340D MHL340DFQC

Transcription

1 TECHNICAL DATA AND INFORMATION 8 kw/171 hp t MHL4D MHL4DFQC SCRAP RECYCLING MACHINE WITH QUICK CONNECT up to 1.7 m

2 TECHNICAL DATA MHL4D/MHL4DFQC OPERATING WEIGHT WITHOUT ATTACHMENTS t MHL4 D FQC t DIESEL ENGINE MANUFACTURER AND MODEL Deutz TCD 2 L 2V DESIGN -cyinder inine CONTROL SYSTEM EMR III TYPE 4-stroke diese, common rai direct injection, turbo-charger with intercooing ENGINE OUTPUT 8 kw/171 hp NOMINAL SPEED 2 min -1 DISPLACEMENT. COOLING SYSTEM Liquid intercooing with temperature-controed fan speed EMISSION STANDARDS COM III and EPA Tier III AIR FILTER DESIGN Two-stage fiter with safety vave USEFUL FUEL TANK CAPACITY 7 ELECTRICAL SYSTEM OPERATING VOLTAGE BATTERY LIGHTING SET OPTION 24 V 2 x V / 1 Ah / 7 A (in accordance with EN) 1 x H foodight on upper carriage, 1 x H foodight on cab foor, turn signa and rear sidemarker amps 1 kw d.c. generator with contro, driven by V-bet direct from diese engine TRAVEL DRIVE Hydrostatic drive through infinitey variabe axia piston motor, directy mounted trave brake vaves, two-speed shift gear, a-whee drive TRAVEL SPEED, 1st GEAR max. 5 km/h (.1 mph) TRAVEL SPEED, 2nd GEAR max. 2 km/h (.4 mph) GRADEABILITY max. 45% TURNING RADIUS 8.2 m RING GEAR DRIVE SWING SYSTEM Internay toothed ba ring gear (doube row) -stage panetary gear with integrated muti-disc brake UPPER CARRIAGE SWING SPEED Infinitey variabe from - 8 min -1 PIVOT BRAKE UNDERCARRIAGE Eectricay operated FRONT AXLE Panetary drive axe with integrated drum brake, rigidy mounted, max. steering ange 27 REAR AXLE STABILIZERS TIRES BRAKE SYSTEM Osciating panetary drive rear axe with integrated drum brake and seectabe osciating axe ock 4-point stabiizers Soid rubber eastic, 8-fod MHL4 D FQC Soid rubber eastic, 8-fod. - 2 SERVICE BRAKE PARKING BRAKE Hydrauic singe-circuit braking system acting on a four whee pairs Eectricay operated disc brake at transmission, acting on both front and rear axe 2

3 HYDRAULIC SYSTEM MAX. PUMP CAPACITY MAX. OPERATING PRESSURE HYDRAULIC OIL TANK LINDE mobie hydrauic system with oad imit contro and fue-saving power demand contro. Separate oi cooer, temperature-controed fan speed. Hydrauic oi fiter: fiter eements integrated in the oi tank; maintenance interva: operating hrs. Centra ubrication system. Optiona too fiter system (standard for FQC) 2 x 2 /min 25/ 55 bar 54 OPERATOR S CAB Easticay supported, infinitey variabe hydrauicay height-adjustabe with max. eye eve of 5.4 m. Sound-deadened, heat-insuated panoramic windows for optimum a-around view, windshied with pu-down sunbind that sides under cab roof, siding window in cab door, steering coumn height and tit adjustabe. HEATING OPERATOR S SEAT MONITORING AIRCONDITIONING SOUND POWER LEVEL Infinitey variabe hot water heating with -speed fan, 4 adjustabe defroster nozzes Air-cushioned comfort-seat with integrated headrest, safety bet and umbar support, seat heating with integrated a/c function optiona. Seat position, seat incination and reation of seat to armrests and piot contros a muti-adjustabe, aowing fatigue-free operation. Ergonomic instrument ayout, gare-free. Function monitoring; automatic monitoring, warning and storage of deviating operating conditions, e.g. fiter pressure w. warning indicator and shutdown of piot contros, warning indicator or shutdown of piot contros if hydrauic oi temperature imits are exceeded. Diagnosis of individua sensors possibe via the muti-function dispay. Automatic (guaranteed) in accordance with guideine 2/14 EG LW(A) = db(a) SAFETY INSTALLATIONS For crane operations in accordance with EN Cab protection by cose proximity range imiter. OFFICIAL HOMOLOGATION Certification in accordance with CE reguations.

4 EQUIPMENT MHL4D/MHL4DFQC ENGINE SERIES OPTION Exhaust gas turbocharger Intercooing Direct eectronic fue injection/ Common Rai Automatic ide Engine pre-heating Interface for engine diagnosis Temperature-controed fan drive UNDERCARRIAGE SERIES OPTION 2-speed shift transmission 2-speed power-shift transmission 4-point stabiizers 4-point stabiiziers, individuay controabe Stabiizer cyinders with integrated two-way check vaves A-whee drive Piston rod protection on stabiizer cyinders Stabiizer pates 5 x 5 Rear axe osciating ock Specia paint Drum brakes Too box UPPER CARRIAGE SERIES OPTION Eectric refueing pump Lighting protection Maintenance hood, actuated by gas strut, with mechanica ocking device Lockabe ceaning access openings on radiator Separate radiator system for ambient temperatures up to 5 C Separate oi cooer w. temperaturecontroed fan drive Automatic centra ubrication system Specia paint Quick-drain vave for fue tank (deivered in too box) Quick-drain vave on hydrauic oi tank Quick-drain vave on radiator Quick-drain vave on engine oi-pan Reversibe fan for radiator and hydrauic oi cooer CAB SERIES OPTION Lift-up skyight in cab roof Air cushioned operator s seat with headrest, safety bet and umbar-support FOPS protective grating Front/roof protective grating Hinged front windshied Front windows break-resistant (LEXAN) Buet-proof gass, front and top Buet-proof gass, front and top MHL4 D FQC Cab eevation system Air conditioning Steering coumn, height and tit adjustabe Muti-function dispay Fire extinguisher, dry powder Pre-equipped for radio Radio cassette Radio / CD payer Rotating beacon Siding window in cab door Safety gass Seat heating with integrated a/c function Engine-independent heating Windscreen washer system EQUIPMENT SERIES OPTION Foodights attached to cab foor Foodights, mounted to superstructure Foodight, stick mounted Hydrauic oi preheating Ba vaves on stick Cose proximity range imiter for stick Cooant and hydrauic oi eve monitoring system Hose rupture protection for ift cyinder Hose rupture protection for stick cyinder Stick shock protection Lubrication of grab suspension via centra ubrication system Overoad protection/shutdown XENON foodight on stick XENON foodight on superstructure XENON foodight on cab roof Quick-connect couping on stick Too fiter system Too fiter system MHL4 D FQC 4

5 DIMENSIONS MHL4 D with protective grating for cab roof MHL4 D Transport dimensions E D A B C DIMENSIONS REACH.2 m (MZS) REACH. m REACH 1.7 m A. mm 1.5 mm 1.8 mm B 5.75 mm 5.88 mm 4.5 mm C 1.1 mm 1.1 mm 1.1 mm D. mm /.52 mm*. mm /.52 mm*. mm /.52 mm* E.1 mm mm.25 mm. mm * with protective grating for cab roof MHL4 D FQC Transport dimensions with protective grating for cab roof 5

6 WORKING RANGES/LIFTING CAPACITIES MHL4D Reach. m with stick Work equipment: Box-type boom 7.2 m; Stick 5.1 m RECOMMENDED ATTACHMENTS LIFT HOOKS TEREX FUCHS CACTUS GRAB. m TEREX FUCHS CACTUS GRAB.8 m TEREX FUCHS MAGNETIC PLATE MP 15 CLAMSHELL GRAB 1. m CLAMSHELL GRAB 1.4 m 1 t Open or haf-cosed shes Open or haf-cosed shes dia. = 15 mm with magnet system 1 kw Loose goods density up to 1.4 kg/m Loose goods density up to 8 kg/m Reach in m Center of rotation HEIGHT m UNDERCARRIAGE REACHES m STABILIZERS non supported (7.2*) 4-pt. supported 7.2* (7.2*) non supported (7.) (4.) 4-pt. supported 7.7* (7.7*) 5.* (5.*) non supported (7.5) (5.1) (.7) 4-pt. supported 8.8* (8.8*) 7.* (7.*) 5.4* (5.4*) non supported (7.5) (5.2) (.8) (2.8) 4-pt. supported 8.8* (8.8*) 7.5* (7.5*) 5.7 (.*) 4.4 (4.4*) non supported (7.) (5.1) (.7) (2.8) 4-pt. supported.* (.*) 7.* (7.*) 5.7 (.*) 4.4 (5.4) non supported (7.) (4.) (.) (2.8) (2.2) 4-pt. supported.* (.*) 7.5 (7.*) 5. (.7*) 4. (5.4).5 (4.*) non supported (1.) (.5) (4.) (.5) (2.7) (2.1) 4-pt. supported 14.* (14.*) 1.4* (1.4*) 7.2 (8.*) 5.4 (.7*) 4.2 (5.).4 (4.) non supported (.) (5.) (4.) (.) (2.) (2.1) 4-pt. supported 15.7* (15.7*).7 (.*). (8.*) 5.2 (.5) 4.1 (5.2).4 (4.2) non supported (.1*) (5.5) (4.) (.1) (2.5) (2.) 4-pt. supported.1* (.1*).2 (.2*). (8.4) 5. (.) 4. (5.1). (4.2) non supported (5.*) (5.2) (.8) (.) (2.4) (2.) 4-pt. supported 5.* (5.*) 8.8 (1.*). (8.1*) 4. (.2). (4.). (.*) non supported (5.) (.7) (2.) (2.4) 4-pt. supported 8.7 (.1*).2 (7.*) 4.8 (5.8*). (4.5*) Capacity vaues are stated in metric tons (t). The pump pressure is 55 bar (514 psi). The vaues, in accordance with ISO 157, amount to 75% of the static tipping oad or 87% of the hydrauic ifting force (marked *). They appy to sewing operations through on a firm and eve surface. Vaues in brackets appy to the ongitudina direction of the undercarriage. Nonsupported vaues ony appy when the oad is hoisted above the front or rear axe. The weight of the attached hoisting equipment (grab, magnet, oad hook etc.) must be deducted from the capacity vaues. In accordance with CE guideines, hose-rupture safety vaves on the ift cyinders and an overoad warning device are required for crane operations.

7 WORKING RANGES/LIFTING CAPACITIES MHL4D Reach 1.7 m with stick Work equipment: Box-type boom 7.2 m; Stick.2 m 1 RECOMMENDED ATTACHMENTS Reach in m Center of rotation LIFT HOOKS TEREX FUCHS CACTUS GRAB.4 m TEREX FUCHS CACTUS GRAB. m TEREX FUCHS MAGNETIC PLATE MP 5 CLAMSHELL GRAB.5 m CLAMSHELL GRAB 1. m 1 t Open or haf-cosed shes Open or haf-cosed shes dia. = 5 mm with magnet system 1 kw Loose goods density up to 1.4 kg/m Loose goods density up to 8 kg/m HEIGHT m UNDERCARRIAGE STABILIZERS REACHES m non supported (5.2*) 4-pt. supported 5.2* (5.2*) non supported (5.) (.5*) 4-pt. supported 5.4* (5.4*).5* (.5*) non supported (5.4) (.) (2.) 4-pt. supported.4* (.4*) 5.* (5.*).2* (.2*) non supported (5.4) (.) (2.) 4-pt. supported.8* (.8*) 5. (.1*) 4.5 (4.*) non supported (5.) (.8) (2.) (2.2) 4-pt. supported.* (.*) 5.8 (.1*) 4.5 (5.5*).5 (.8*) non supported (7.4) (5.1) (.7) (2.8) (2.2) 4-pt. supported 8.* (8.*) 7.* (7.*) 5.7 (.*) 4.4 (5.4).5 (4.) non supported (.) (4.8) (.5) (2.7) (2.1) (1.7) 4-pt. supported.4* (.4*) 7.4 (7.7*) 5.5 (.5*) 4. (5.).4 (4.) 2.4* (2.4*) non supported (.8) (.) (4.4) (.) (2.) (2.) (1.) 4-pt. supported 14.2* (14.2*) 1.1 (1.*) 7. (8.1*) 5. (.*) 4.1 (5.2). (4.2) 2.7 (.1*) non supported (8.5) (5.) (4.1) (.1) (2.4) (1.) (1.) 4-pt. supported 15.1 (15.*).4 (1.*). (8.4*) 5. (.) 4. (5.).2 (4.1) 2.7 (.2*) non supported (.1*) (7.*) (5.1) (.8) (2.) (2.) (1.) (1.) 4-pt. supported.1* (.1*) 7.* (7.*) 8.8 (1.8*). (8.1) 4.8 (.1). (4.).2 (4.) 2.7 (2.8*) non supported (.7*) (4.) (.) (2.8) (2.2) (1.) 4-pt. supported.7* (.7*) 8.5 (1.*).1 (7.8*) 4.7 (.).8 (4.8).1 (.8*) non supported (4.8) (.5) (2.7) 4-pt. supported 8.4* (8.4*). (.7*) 4. (5.*) Capacity vaues are stated in metric tons (t). The pump pressure is 55 bar (514 psi). The vaues, in accordance with ISO 157, amount to 75% of the static tipping oad or 87% of the hydrauic ifting force (marked *). They appy to sewing operations through on a firm and eve surface. Vaues in brackets appy to the ongitudina direction of the undercarriage. Nonsupported vaues ony appy when the oad is hoisted above the front or rear axe. The weight of the attached hoisting equipment (grab, magnet, oad hook etc.) must be deducted from the capacity vaues. In accordance with CE guideines, hose-rupture safety vaves on the ift cyinders and an overoad warning device are required for crane operations. 7

8 WORKING RANGES/LIFTING CAPACITIES MHL4D Reach in m Center of rotation Reach.2 m with muti-purpose stick Work equipment: Box-type boom 7.2 m; Muti-purpose stick 4.5 m; Sorting grab HEIGHT m UNDERCARRIAGE REACHES m STABILIZERS non supported (.4*) 4-pt. supported.4* (.4*) non supported (7.) (4.7) 4-pt. supported 8.* (8.*).7* (.7*) non supported (7.) (4.8) (.4) 4-pt. supported 8.* (8.*) 7.4 (7.5*) 5.4 (.*) non supported (.) (4.7) (.4) (2.5) 4-pt. supported.2* (.2*) 7. (7.*) 5. (.4*) 4. (5.*) non supported (1.) (.5) (4.5) (.) (2.4) 4-pt. supported.* (.*).7* (.7*) 7.1 (7.8*) 5.2 (.5*) 4. (5.) non supported (.5) (.) (4.2) (.1) (2.4) (1.8) 4-pt. supported 14.4* (14.4*).8 (1.*).8 (8.1*) 5. (.4). (4.).1 (.2*) non supported (5.4) (.) (2.) (2.) (1.8) 4-pt. supported.2 (1.8*).5 (8.*) 4. (.2).8 (4.8).1 (.) non supported (5.) (.) (2.8) (2.2) (1.7) 4-pt. supported 8.7 (1.7*).2 (8.) 4.7 (.).7 (4.7). (.8) non supported (4.*) (4.7) (.5) (2.7) (2.1) 4-pt. supported 4.* (4.*) 8.4 (.*). (7.5*) 4. (5.). (4.*) non supported (.4) (2.) 4-pt. supported 5. (.*) 4.5 (5.*) Capacity vaues are stated in metric tons (t). The pump pressure is 55 bar (514 psi). The vaues, in accordance with ISO 157, amount to 75% of the static tipping oad or 87% of the hydrauic ifting force (marked *). They appy to sewing operations through on a firm and eve surface. Vaues in brackets appy to the ongitudina direction of the undercarriage. Nonsupported vaues ony appy when the oad is hoisted above the front or rear axe. The weight of the attached hoisting equipment (grab, magnet, oad hook etc.) must be deducted from the capacity vaues. In accordance with CE guideines, hose-rupture safety vaves on the ift cyinders and an overoad warning device are required for crane operations. 8

9 WORKING RANGES/LIFTING CAPACITIES MHL4DFQC Reach in m Center of rotation Reach m with stick Work equipment: Box-type boom 5.2 m; Stick 5.4 m; Cactus grab with Quick Connect FQC HEIGHT m UNDERCARRIAGE REACHES m STABILIZERS non supported (5.*) 4-pt. supported 5.* (5.*) non supported (.*) (4.*) 4-pt. supported.* (.*) 4.* (4.*) non supported (5.2) (.7) 4-pt. supported.* (.*) 4.* (4.*) non supported (7.7) (5.2) (.7) 4-pt. supported 8.* (8.*) 7.* (7.*) 5.5* (5.5*) non supported (7.) (5.) (.) (2.) 4-pt. supported.* (.*) 7.7* (7.7*) 5.7 (.7*).* (.*) non supported (.1) (.8) (4.7) (.4) (2.) 4-pt. supported.8* (.8*) 1.* (1.*) 7.5 (8.1*) 5.5 (.8*) 4.2* (4.2*) non supported (1.) (.7) (.2) (4.) (.2) (2.5) 4-pt. supported 25.5* (25.5*) 15.1* (15.1*) 1. (1.*) 7.1 (8.5*) 5. (.7*) 4.1 (5.2*) non supported (7.7*) (8.7) (5.7) (4.1) (.1) (2.5) 4-pt. supported 7.7* (7.7*) 15.8* (15.8*). (.*).8 (8.*) 5.1 (.4*).* (.*) non supported (7.*) (8.2) (5.4) (.) (.) 4-pt. supported 7.* (7.*) 14.* (14.*). (1.1*). (7.5*) 5.1 (5.4*) Capacity vaues are stated in metric tons (t). The pump pressure is 55 bar (514 psi). The vaues, in accordance with ISO 157, amount to 75% of the static tipping oad or 87% of the hydrauic ifting force (marked *). They appy to sewing operations through on a firm and eve surface. Vaues in brackets appy to the ongitudina direction of the undercarriage. Nonsupported vaues ony appy when the oad is hoisted above the front or rear axe. The weight of the attached hoisting equipment (grab, magnet, oad hook etc.) must be deducted from the capacity vaues. In accordance with CE guideines, hose-rupture safety vaves on the ift cyinders and an overoad warning device are required for crane operations.

10 WORKING RANGES/LIFTING CAPACITIES MHL4DFQC Reach.2 m with muti-purpose stick 1 Work equipment: Box-type boom 5.2 m; Muti-purpose stick 5. m; Sorting grab with Quick Connect FQC GENESIS SCHROTTSCHERE GXP R Reach in m Center of rotation HEIGHT m UNDERCARRIAGE REACHES m STABILIZERS non supported (5.*) 4-pt. supported 5.* (5.*) non supported (4.8*) 4-pt. supported 4.8* (4.8*) non supported (5.1) (.5) 4-pt. supported 5.* (5.*) 4.* (4.*) non supported (5.) (.5) (2.*) 4-pt. supported.8* (.8*) 5.* (5.*) 2.* (2.*) non supported (7.2) (4.8) (.4) (2.5) 4-pt. supported 8.4* (8.4*) 7.* (7.*) 5.5 (.*).4 (.4*) non supported (1.2*) (.7) (4.5) (.2) (2.4) 4-pt. supported 1.2* (1.2*).4* (.4*) 7. (7.7*) 5. (.4*) 4. (4.2*) non supported (2.) (.7) (.) (4.2) (.) (2.) 4-pt. supported 24.* (24.*) 14.4* (14.4*) 1.1 (1.*) 7. (8.*) 5.1 (.4*). (4.*) non supported (8.1*) (8.5) (5.5) (.) (2.) (2.2) 4-pt. supported 8.1* (8.1*) 15.4* (15.4*).5 (1.*). (8.*) 4. (.1*). (4.2*) non supported (.8*) (7.) (5.1) (.7) (2.7) 4-pt. supported.8* (.8*) 14.2* (14.2*).1 (.*).4 (7.*) 4.8 (5.*) Capacity vaues are stated in metric tons (t). The pump pressure is 55 bar (514 psi). The vaues, in accordance with ISO 157, amount to 75% of the static tipping oad or 87% of the hydrauic ifting force (marked *). They appy to sewing operations through on a firm and eve surface. Vaues in brackets appy to the ongitudina direction of the undercarriage. Nonsupported vaues ony appy when the oad is hoisted above the front or rear axe. The weight of the attached hoisting equipment (grab, magnet, oad hook etc.) must be deducted from the capacity vaues. In accordance with CE guideines, hose-rupture safety vaves on the ift cyinders and an overoad warning device are required for crane operations. 1

11 WORKING RANGES/DATA MHL4DFQC Reach in m Center of rotation With scrap shears Work equipment: Box-type boom 5.2 m; Scrap shears GXP with Quick Connect FQC GENESIS SCRAP SHEARS GXP CUTTING FORCE JAW DEPTH JAW OPENING WEIGHT* 5.74 kn 1 mm 584 mm 4 t * inc. Quick Connect system

12 Terex Fuchs GmbH D-7 Bad Schönborn Germany Te.: +4 () 72 5/ 84- Fax: +4 () 72 5/ 8 41 Web: Emai: info@terex-fuchs.de PURPOSE BUILT MACHINES WITH MORE POSSIBILITIES MHL4 D. The top performer in the recycing business With its ong reaches and high ifting capacities, the MHL4 D from Terex Fuchs is one of the internationa top modes in recycing and scrap meta handing. Its uttery reiabe stabiity and high-performance boom design ensure safety in the most chaenging of situations. The two-circuit hydrauic system enabes sewing manoeuvres to be fast, powerfu and precise with minima power oss. Aongside the machine s extraordinary robustness, its technica highights incude the powerfu and economica turbo diese engine and the high-performance cooing system. This bunde of power is controed safey and efficienty from the hydrauicay height-adjustabe cab; thanks to the utramodern text dispay and the panorama windows the operator is aways in compete command of the situation. MHL4 D and FQC. The unbeatabe combination The MHL4 D can be suppied both with a cassic boom and with the Terex Fuchs Quick Connect (FQC) system. The three etters FQC show that the toos can be swifty and speediy changed. For exampe, the muti-purpose stick with grab or the stick with magnetic pate can be exchanged for the GENESIS scrap shears in ess than a minute. The Quick Connect system is based on eakage-free quick-connect coupings which, with the hep of a hydrauic ocking device, can be connected to each other with no oss of oi and amost without wear. A connections are protected against shocks and contamination; the robust design of the unit made up of stick and Quick Connect couping ensures mechanica stabiity. Sensors verify correct positioning and secure ocking when connecting and disconnecting and reay the information direct to the operator s cab. The Terex Fuchs Quick Connect system maximizes efficiency, enabing a singe machine to carry out a whoe range of tasks with very short changeover times. It aso adds consideraby to safety. The operator no onger needs to eave the cab to change the toos, and fidding with bots is a thing of the past. On account of its many advantages, the FQC system has been awarded the TBG s Euro-Test prize. MHL4 D vaid from machine no GB (1.5). Printed in Germany. For further information pease contact your deaer or the Terex Fuchs saes department. Terex Fuchs reserves the right to continuay improve its products. Product specifications are subject to change without notice or obigation. The photographs and drawings in this brochure are for iustrative purposes ony. Refer to the appropriate Operator s Manua for instructions on the proper use of this equipment. Faiure to foow the appropriate Operator s Manua when using our equipment or to otherwise act irresponsiby may resut in serious injury or death. Prices and specifications subject to change without notice. The ony warranty appicabe is the standard written warranty appicabe to the particuar product and sae. Terex Fuchs provides no undertakings beyond the expressy agreed warranty conditions. Terex Corporation 28 - Terex is a registered trade mark of the Terex Corporation in the United States of America and many other countries.