266 HP 94,500 lbs. C Series. green line Material Handling Machine

Size: px
Start display at page:

Download "266 HP 94,500 lbs. C Series. green line Material Handling Machine"

Transcription

1 266 HP 94, lbs. C Series green line Material Handling Machine

2 Working Attachments Scrap Shear Rehandling Grab Timber Grab Scrap Grapple Magnet Hook Concrete Crusher Recycling and Demolition Grab Concrete Cutter 2

3 Working radius up to 62' No computers required to control hydraulic system Ultra fine hydraulic oil filtration system reduces maintenance cost and down time of machine Specifications Central lubrication system standard State-of-the-art load-sensing hydraulic system Powerful, maintenance friendly design Low noise emission Engine 6 cylinder, water cooled, turbo Caterpillar 3126B diesel engine, with direct injection Output as per DIN/ISO: 266 HP at 2 rpm Radiator fan is hydraulically driven and is reversible to clean out debris from radiator Equipped with engine intercooler Dry air filter with cyclone prefilter, safety element and pollution indicator Fuel tank capacity: 12 gallons Electrical system: 24 volt, 2 x 12 volt high performance batteries Hydraulic System Computer free load-sensing hydraulic system with energy saving flow on demand control and pressure cut off function All working functions can be operated simultaneously and be individually controlled very precisely due to the independent and proportional split of the oil feed from the variable displacement pump Hydraulic system designed for low pressure losses and heat generation by large diameter piping and hoses as well as large control valves Pilot operated joy sticks control all working and auxiliary functions Flow rate 1 x 14 gpm Working pressure 4931 psi Hydraulic tank capacity: 79.2 gallons Special ultra fine filtration system (99.9% efficiency at 2 micron) designed to protect the hydraulic system, extending the life of all components and reducing the down time of the machine as well as the maintenance and repair costs Full flow return oil filters with extended change intervals Oversized hydraulic oil cooler, mounted completely separated from the water radiator, maintaining the oil temperature at an ideal level. The fan is hydraulically driven and thermostatically controlled Centralized pressure test ports, easily accessible from ground level, mounted and well protected on the left side of the machine, enable fast trouble shooting of all machine functions without any electronic support Certification according to Subject to technical modification regulations Swing System Axial piston motor, spring loaded hydraulically releasable multiple disk brake, planetary gear and pinion shaft Large dimensioned swing bearing Swing speed: - 8 rpm, infinitely controllable Hydraulic motor with integrated hydraulic brake valves keep wear and tear of braking system to a minimum Undercarriage MP41 undercarriage welded as rigid, torsionfree box-type design 4-point outriggers Lockable storage compartment Tires: 8 x solid rubber tires with intermediate protector ring Option: 8 pneumatic tires All wheel drive via variable hydraulic motor with directly mounted automatic brake valve and 2-stage powershift gear 2 circuit servo brake system with additional safety brake as parking brake Special design, heavy duty, extra wide, 6 t axles Steering axle as hydraulically controllable oscillating axle Oscillating axle cylinder with safety check valves - 3. mph off road mph on road Uppercarriage Torsion-free upper frame with continuous bearing-plates for optimal power introduction, precision machined Steel bushings for the boom pivot Low noise emission Working Equipment Box-type design with large dimensioned sealed bearings for long working-life Grapple open-close and rotate circuits installed on the machine Working cylinders with hydraulic end position damping Optimized design for high lifting capacities Equipped standard with safety check valves (load holding valves) for boom and stick cylinders The 83 M C Series material handling equipment has been specially designed for the increased demands of high-performance operation, increased productivity and output Magnet System 2 kw Baldor generator, belt driven for easy operation and maintenance, combined with a Hubbell controller Grapple.7 to 1. cu. yds. scrap grapple with rotation, 4 or tine, open, semi-closed or closed, depending on the weight of the grapple and operating reach.7 to 2. cu. yds. clamshell grapple with rotation, depending on the material density, weight of the grapple and operating reach Log grapple available in different sizes and configurations depending on material being handled Contact Sennebogen for approval of the attachment before operating the machine Always refer to the lifting capacities on the chart before installing any attachment Operating Weight Basic 83 with 4-point outriggers, material handling boom 27'", stick 22'" and scrap grapple 1. cu. yds. Approximate weight 94, lbs. Given weights may vary with different equipment Operator s Cab Comfortable F2 operator s cab resiliently mounted Sound absorbing insulation Roomy compartment with excellent all-round visibility All weather design with tinted safety glass Door window as sliding window Windshield can be pushed up under cab roof Large skylight Windshield wiper/washer on both windshield and skylight Sun visor Large capacity storage bin Ergonomically designed, air suspension and heated seat with adjustable armrests and lumbar support Well laid out instrument panel with ergonomically shaped joy sticks Adjustable steering column Infinitely variable cab heating system, outside air and circulating air stages with particle filter Five adjustable air vents for optimum work environment New Sennebogen Diagnostic System (SDS) for monitoring all essential machine and engine functions with visual and audible warning system 12 and 24 volt power supply Air conditioning AM/FM radio with cassette 3

4 Meters 18,7 14,32 Boom Position I K ,7 14,77 [16,3] [12,34] 2,6 17,8 14, [16,7] [12,6] [9,7] 21,6 2,6 17,4 13,22 [16,7] [12,6] [9,7] [7,7] 23,14 2,94 18, 1,43,36 [16,3] [12,34] [9,7] [7,7] [6,17] 24,9 24,69 21,38 18,73 1,2 12,6 [22,48] [16,9] [12,12] [9,47] [7,49 ] [6,17 ] 29,76 26, 22,4 18, 14,99 12,6 [21,6] [1,43] [11,68] [9,2] [7,27] [,9] 34,6 27, 22,7 18,7 14,77 12,34,36 [2,6] [14,] [11,2] [8,8] [7,] [,9] [4,8] 37,2 28,88 22,4 17,63 14, 12,12,36 [18,29] [13,44] [,36] [18,37] [6,83] [,73] [4,8] 38,13 27,77 21,38 17,19 14, 12,12,36 [16,7] [12,6] [9,92] [7,93] [6,6] [,] [4,62] 22,26 26,89 2,72 16,7 13,88 11,9 9,47 [1,6] [11,9] [9,47] [7,7] [6,39] [,] [4,62] 18, 2,79 2, 16,3 13,88 11,2 [1,2] [11,46] [9,3] [7,49] [6,17] [,29] 21,82 18,7 14,77 11,68 [11,24] [9,3] [7,27] [6,17] machine shown in mirror image Meters M Undercarriage MP41, 4-point stabilizers tires 8 x Boom: 27'" Stick: 22' Boom position: I Cab: C 27 hydraulic elevating cab with operator s eye level 19'4" Load chart Notes: Lifting capacities are stated in pounds. Indicated loads are based on ISO 67 and do not exceed 7% of tipping and 87% of hydraulic capacity. Machine must be situated on firm, level ground. Loads valid for 36º. Loads in [...] are valid 36 free on wheels. Lifting capacities do not include working attachments such as scrap grapples, magnets, etc. Their weights must be deducted from the numbers indicated in the lifting charts.

5 Meters 13,22 Boom Position I K , 11, ,9 14,32 11,68 [12,78] [9,92] 1 17,4 16,9 14, 11,46 [13,] [,14] [7,93] 17,4 16,9 13,88,8 [13,22] [,14] [7,93] [6,39] ,4 18,73 17,63 1,43 13, 8,9 [17,4] [13,] [,14] [7,93] [6,39] [,7] 2,72 19,62 17,4 1,43 12,78,8 [16,97] [12,78] [9,92] [7,7] [6,17] [,7] ,14 2,28 17,63 [16,3] [12,12] [9,47] 1,2 [7,49] 12,78 [6,17],8 [4,8] ,89 24,9 21,16 18,7 [21,6] [1,43] [11,46] [9,3] 14,99 [7,27] 12,34 [,9],8 9,3 [4,8] [3,96] , 26,4 21,82 [19,62] [14,] [,8] 17,8 [8,9] 14, [6,83] 12,12 [,],36 8,8 [4,62] [3,74] 4 1 3,7 27, [17,4] [12,78] 21,6 [9,92] 17,19 [7,93] 14, [6,39] 11,9 [,29],14 8,8 [4,4] [3,74] 3 26,4 26,89 [1,43][11,68] 2,72 [9,2] 16,3 [7,49] 13,66 [6,17] 11,68 9,92 [,7] [4,18] 8,9 [3,2] ,99 2,79 [14,][,8] 2,6 [8,9] 16,9 [7,] 13,4 [,73] 11,46 9,7 [4,8] [4,18] 8,6 [3,2] 12,78 24,69 19,4 1,6 13, 11,24 9,7 7,49 [,14] [8,] [6,6] [,] [4,62] [3,96] [3,2] ,6 21,38 18,7 1,2 12,78,8 8, [9,92] [7,93] [6,39] [,29] [4,62] [3,96] -3-14,77 12,6 [6,39], machine shown in mirror image -7-2 Meters M Undercarriage Boom: Stick: Boom position: Cab: MP41, 4-point stabilizers tires 8 x '" 2'7" I C 27 hydraulic elevating cab with operator s eye level 19'4"

6 Meters ,92,36 [,14] 12,78,36 [,14] [7,93] 13,22 12,12 9,92 [,14] [7,93] [6,39] 14,77 13,44 12,34 11,46 8,9 [13,] [9,92] [7,93] [6,17] [,7] 1,43 13,88 12,6 11,46,8 [12,6] [9,7] [7,7] [6,17] [4,8] Boom Position I B ,73 16,3 14,32 13, 11,9,8 8, [1,87] [11,9] [9,2] [7,27] [,9] [4,62] [3,74] ,3 2, 17,4 1,2 13,44 12,12 [2,] [14,] [11,2] [8,9] [6,83] [,],36 [4,4] 8,8 [3,74] ,6 22,48 18, 1,87 13,88 [17,8] [13,22] [,14] [7,93] [6,39] 11,9 [,29],14 [4,18] 8,9 [3,2] ,74 24,2 19,62 16,3 [1,2] [11,68] [9,3] [7,27] 13,66 [,9] 11,46 [4,8] 9,7 [3,96] 8,37 [3,3] 3 14, 2,3 19,84 [13,22] [,36] [8,] 1,87 [6,6] 13,22 [,] 11,24 [4,62] 9,47 [3,74] 8, [3,8] ,2 21,38 18,9 [9,2] [7,49] 1,2 12,78 [6,17] [,7],8 [4,18] 9,2 [3,2] 8, [3,8],36 16,97 [8,9] 18,29 [7,] 14,77 [,73] 12,34 [4,8],8 [3,96] 9,3 7,93 [3,3] [2,86] ,36 1,43 [8,37] 17,8 [6,6] 14, [,] 12,12 [4,62],36 [3,74] 9,3 7,93 [3,3] [2,86] -3 -,8 14,99 [8,] 17,63 [6,39] 14,32 [,29] 11,9 [4,4],14 8,8 [3,74] [3,8] ,3 14, [6,39] [,7] 11,9 [4,4],14 [3,74] 8, Meters -9 machine shown in mirror image M Undercarriage Boom: Stick: Boom position: Cab: MP41, 4-point stabilizers tires 8 x '1" banana type 2'7" I C 3/26 hydraulic elevating and forward moving cab with operator s eye level 2'8"

7 Boom Position I K1 Meters ,4 1 2, 17,8 2,28 13,88 [16,9] [11,9] 17,63 13,66 [16,3] [12,12] [9,2] ,4 2,28 17,19 12,12 [16,3] [12,12] [9,2] [7,27] ,8 2,72 18,29 14,99 [16,9] [11,9] [9,2] [7,27] ,4 24,69 21,38 [22,4] [1,6] [11,68] 18,29 [9,3] 14,77 [7,27] 12,34 [,73] ,96 26, 22,4 [2,94] [14,99] [11,24] 18,7 [8,8] 14,77 [7,] 12,12 [,73] ,83 27, 22,26 17,63 [29,4] [19,4] [14,] [,8] [8,37] 14,32 [6,83] 12,12 [,] ,2 28,43 21,6 [17,63] [13,] [,14] 17,19 [7,93] 14, [6,6] 11,9 [,29] 3 3,27 27,33 [16,9][12,12] 2,94 [9,47] 16,7 13,88 11,68 [7,7] [6,17] [,29] 2 1 2,6 26,67 2, [1,2][11,46] [9,3] 16,3 [7,27] 13,66 [6,17] 11,46 [,7] 17,4 24,69 2,6 [14,99] [11,24] [8,8] 16,3 13,22,14 [7,] [,9] [,7] ,28 16,97 13,66 [11,2] [8,9] [7,] machine shown in mirror image Meters M Undercarriage Boom: Stick: Boom position: Cab: MP41, 4-point stabilizers tires 8 x '" 21' with reversing mechanism I C 27 hydraulic elevating cab with operator s eye level 19'4" 7

8 Machine Specifications 83 M with 8'" hydraulic elevating Cab Type C 27 '6" 9'" 8'" 19'" 11'4" 11' 4" 1' 4'9" 9'" 14'" 1'9" '6" 18' 19'8" 83 M with hydraulic elevating and forward moving Cab Type C 3/26 9'" 21'2" 11'4" 11'6" 8'6" 7'3" 8 Depending upon tolerances, measurements may vary.

9 83 M with hi-rise cab, standard height 3'3" '6" 13'7" '2" 4'9" '6" 18' 19'8" Available with optional ', 6'7" or higher models. Hydraulic tilting mechanism for easy transportation is standard on all hi-rise cabs. 9

10 Shipping Specifications 42' '8" 11'4" 83 M with Boom 27'" and Stick 22' 4'3 11' 11'4" 83 M with Boom 31'" and Stick 2'7" 48'7" 11'2" 11'4" 83 M with Banana Boom 3'1" and Stick 2'7" 41'4" '6" 11'4" 83 M with Boom 27'" and special Stick 21' with reversing mechanism

11 Notes 11

12 Comfortable F2 operator s cab Advanced design, clear layout Low noise and vibration Excellent all-round visibility Fully adjustable air suspension seat, heated Heating and air conditioning with fresh / recirculation airflow and air filter Adjustable steering column Serviceability The C Series machines offer a coarse particle separator at the front of engine cooler and air filter Ease of access for air filter and battery maintenance Hydraulic oil cooler separated from radiator, mounted on the left side towards the back of the machine, hydraulically driven and easy to clean The radiator fan is reversible and controlled from the cab, allowing the driver to clean out any debris from the radiator compartment Large engine compartment Powerful water-cooled Caterpillar diesel engine longitudinally mounted for ease of access Daily service conveniently and easily performed from ground level Large access door with gas shocks provide easy access to engine compartment Left side compartment holds key components Diesel tank Electrical box with all fuses and relays for easy access and centralized electrical maintenance Central lubrication system Centralized pressure test ports for trouble shooting of all working functions SENNEBOGEN LLC 283 Jeff Adams Drive, Suite H Charlotte, NC 2826 Telephone (Toll Free) Fax: sales@sennebogen-na.com Under our policy of continuous improvement, we reserve the right to change specifications and design without prior notice. The illustrations shown may include optional equipment M-C-USA-3-3

132 HP 54,000 lbs. C Series. green line Material Handling Machine

132 HP 54,000 lbs. C Series. green line Material Handling Machine 1 HP, lbs. C Series green line Material Handling Machine Working radius up to ' No computers required to control hydraulic system Ultra fine hydraulic oil filtration system reduces maintenance cost and

More information

B35R-HD C Series. ~ 112,650 Ibs. ~ 266HP. green line Material Handling Machine LEADING THROUGH INNOVATION

B35R-HD C Series. ~ 112,650 Ibs. ~ 266HP. green line Material Handling Machine LEADING THROUGH INNOVATION 266HP 112650 bs. B35R-HD C Series green line Material Handling Machine LEADNG HROUGH NNOVAON 5EtlJEBDGEN'!!Jrr-:.m Bg[jfJ B35R-HO Working Attachments Scrap Shear Rehandling Grab '(J Scrap Grapple imber

More information

Material Handling Machine

Material Handling Machine Leading Through nnovation HP Material Handling Machine, lbs. (M), lbs. (R-HD) Leading Through nnovation Sennebogen Hydroclean This system, using a micron filter, keeps the hydraulic circuit free from water

More information

Technical Specifications SENNEBOGEN Rubber Tired Material Handler

Technical Specifications SENNEBOGEN Rubber Tired Material Handler Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Cummins QSB.-C Tier Final HP ( kw) Reach standard optional '" (. m) (stick pin) '" (

More information

Technical Specifications

Technical Specifications Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier Final HP (18 kw) 8,9 lb (8, kg) Reach

More information

PRELIMINARY. Technical Specifications SENNEBOGEN Rubber Tired Material Handler. Leading Through Innovation

PRELIMINARY. Technical Specifications SENNEBOGEN Rubber Tired Material Handler. Leading Through Innovation Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Cummins QSG1, Tier Net Power HP (1 kw) Reach standard optional '" (1. m) (stick pin) '8" (19.1

More information

PRELIMINARY GREEN HYBRID. Technical Specifications SENNEBOGEN Rubber Tired Material Handler. Leading Through Innovation. Reach 69' (21 m) (stick pin)

PRELIMINARY GREEN HYBRID. Technical Specifications SENNEBOGEN Rubber Tired Material Handler. Leading Through Innovation. Reach 69' (21 m) (stick pin) Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Cummins QSL9, Tier Final HP ( kw) Reach standard optional ' (18 m) (stick pin) 9' (1

More information

PRELIMINARY GREEN HYBRID. Technical Specifications SENNEBOGEN Rubber Tired Material Handler. Leading Through Innovation

PRELIMINARY GREEN HYBRID. Technical Specifications SENNEBOGEN Rubber Tired Material Handler. Leading Through Innovation Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Cummins QSL1, Tier Final 3 HP (8 kw) Reach standard 9'1" (18 m) optional 7'" (3 m) Operating

More information

Technical Specifications SENNEBOGEN Rubber Tired Material Handler preliminary

Technical Specifications SENNEBOGEN Rubber Tired Material Handler preliminary Technical Specifications SENNEBOGEN Rubber Tired Material Handler preliminary Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier FInal 13 HP (97 kw), lb

More information

Technical Specifications SENNEBOGEN Rubber Tired Material Handler

Technical Specifications SENNEBOGEN Rubber Tired Material Handler Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier F 13 HP (97 kw),8 lb (3,9 kg) Reach

More information

Technical Specifications SENNEBOGEN Track Material Handler

Technical Specifications SENNEBOGEN Track Material Handler Technical Specifications SENNEBOGEN Track Material Handler Leading Through Innovation Engine Model Net Power Cummins QSB., Tier Final HP (18 kw) Reach standard optional '1" (1. m) (stick pin) '" (1 m)

More information

Technical Specifications Sennebogen Track Material Handler

Technical Specifications Sennebogen Track Material Handler Technical Specifications Sennebogen Track Material Handler Leading Through Innovation Engine Model Net Power Cummins QSX1-C, Tier i HP (391 kw) Reach standard optional 9'" (1.1 m) (stick pin) up to 3'"

More information

Technical Specifications SENNEBOGEN Track Material Handler

Technical Specifications SENNEBOGEN Track Material Handler Technical Specifications SENNEBOGEN Track Material Handler Leading Through Innovation Engine Model Net Power Cummins QSL9, Tier Final HP ( kw) Reach standard optional 1 (1 m) (stick pin) up to 8 (18 m)

More information

Technical Specifications SENNEBOGEN Demolition Machine

Technical Specifications SENNEBOGEN Demolition Machine Technical Specifications SENNEBOGEN Demolition Machine Leading Through Innovation Engine Model Net Power Cummins QSB.7 Tier Final HP (18 kw) Operating Weight Approx. 9,78 lb (3,9 kg) Technical Specifications

More information

preliminary Technical Specifications SENNEBOGEN Tracked Material Handler Leading Through Innovation Reach Standard 36' (11 m) Engine

preliminary Technical Specifications SENNEBOGEN Tracked Material Handler Leading Through Innovation Reach Standard 36' (11 m) Engine Technical Specifications SENNEBOGEN Tracked Material Handler preliminary Leading Through Innovation Engine Model Net Power Operating Weight R/Crawler Undercarriage Cummins QSB., Tier Final 13 HP (97 kw)

More information

MATERIAL HANDLER MHL340 D. Features. Specifications

MATERIAL HANDLER MHL340 D. Features. Specifications MHL340 D MATERIAL HANDLER Specifications Operating Weight Engine Output Reach 60,627-63,934 lbs 171 hp Up to 44.9 ft Features With its long reach and high lifting capacities, the MHL340 D from Terex Fuchs

More information

MATERIAL HANDLER MHL320 D. Specifications. Features

MATERIAL HANDLER MHL320 D. Specifications. Features MHL D MATERIAL HANDLER Specifications Standard Machine Weight Engine Output Reach, lbs 9 t hp kw Up to ft. m Features Fuel efficient and powerful, the hp kw turbo diesel engine enables movement of loads

More information

MATERIAL HANDLER MHL360 D. Specifications. Features

MATERIAL HANDLER MHL360 D. Specifications. Features MHL360 D MATERIAL HANDLER Specifications Operating Weight Engine Output Reach 97,003 lbs - 101,413 lbs 249 hp Up to 59 ft Features Powerful, fuel efficient 249 hp engine matched with hydraulic functions

More information

A 954 B HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications

A 954 B HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications Technical Description Hydraulic Excavator A 95 B HD litronic` Machine for Industrial Applications Operating Weight 138,88 151, lbs Engine Output HP ( kw) Technical Data Engine Rating per ISO 99 HP ( kw)

More information

MATERIAL HANDLER MHL350 E. Specifications. Features. Up to 52.5 ft 16 m

MATERIAL HANDLER MHL350 E. Specifications. Features. Up to 52.5 ft 16 m MHL35 E MATERIAL HANDLER Specifications Standard Machine Weight Engine output Reach 75, lbs 34 t 215 hp 16 kw Up to 52.5 ft 16 m Features Fuel saving ECO & ECO+ operating modes enhance flexibility while

More information

A 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications

A 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications Technical Description Hydraulic Excavator A 9 B litronic` Machine for Industrial Applications Operating Weight 67,7 7,98 lbs Engine Output 97 HP ( kw) Technical Data Engine Rating per ISO 99 97 HP ( kw)

More information

MATERIAL HANDLER. MHL350 E TIER 4i. Specifications. Features. Operating weight 70,548-78,264 lbs ( t) Reach up to 52.

MATERIAL HANDLER. MHL350 E TIER 4i. Specifications. Features. Operating weight 70,548-78,264 lbs ( t) Reach up to 52. MHL35 E TIER 4i MATERIAL HANDLER Specifications Operating weight 7,548-78,264 lbs (32 35.5 t) Engine output 214 hp (16 kw) Reach up to 52.5 ft (16 m) Features Fuel efficient high output engine with a reduction

More information

A 944 B HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications

A 944 B HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications Technical Description Hydraulic Excavator A 944 B HD litronic` Machine for Industrial Applications Operating Weight 106,300 116,000 lbs Engine Output 245 HP (180 kw) Technical Data Engine Rating per ISO

More information

MATERIAL HANDLER MHL360 F HD. Features. Specifications

MATERIAL HANDLER MHL360 F HD. Features. Specifications MHL360 F HD MATERIAL HANDLER Features Fuel saving ECO & ECO+ operating modes enhance flexibility while reducing operating costs Powerful, fuel efficient 255 hp 190 kw engine matched with hydraulic functions

More information

MATERIAL HANDLER MHL360 E. Specifications. Features. Up to 59 ft 18 m

MATERIAL HANDLER MHL360 E. Specifications. Features. Up to 59 ft 18 m MHL36 E MATERIAL HANDLER Specifications Standard Machine Weight Engine Output Reach Features 1,5 lbs 46 t 255 hp 19 kw Up to 59 ft 18 m Fuel saving ECO & ECO+ operating modes enhance flexibility while

More information

A 934 C HD. Machine for Industrial Applications

A 934 C HD. Machine for Industrial Applications Machine for Industrial Applications A 93 C HD litronic` High Rise Operating Weight: 100,300 10,300 lb Engine Output (SAE J139): 01 HP / 150 kw Engine Output (ISO 99): 0 HP / 150 kw Technical Data Engine

More information

litronic` Operating Weight: 80,350 83,000 lb Engine Output (SAE J1349): 201 HP / 150 kw Engine Output (ISO 9249): 204 HP / 150 kw

litronic` Operating Weight: 80,350 83,000 lb Engine Output (SAE J1349): 201 HP / 150 kw Engine Output (ISO 9249): 204 HP / 150 kw Log Loader A 934 C HD litronic` Operating Weight: 80,30 83,000 lb Engine Output (SAE J1349): 201 HP / 10 kw Engine Output (ISO 9249): 204 HP / 10 kw Technical Data Engine Rating per SAE J1349 201 HP (10

More information

MHL 350D. High-performance 198 HP (148 kw) turbocharged diesel engine (TIER III / COM III) Operating weight from

MHL 350D. High-performance 198 HP (148 kw) turbocharged diesel engine (TIER III / COM III) Operating weight from MHL 350D MATERIAL HANDLER ENGINE WEIGHT REACH 198 HP (148 kw) 70,548-78,264 lbs (32-35.5 t) 52 /49 /46 (16/15/14 m) MHL 350D SCRAP RECYCLING MACHINE High-performance 198 HP (148 kw) turbocharged diesel

More information

A 934 C HD. Machine for Industrial Applications

A 934 C HD. Machine for Industrial Applications Machine for Industrial Applications A 934 C HD litronic` Operating Weight: 9,7 93, lb Engine Output (SAE J1349): 21 HP / kw Engine Output (ISO 9249): 24 HP / kw Technical Data Engine Rating per SAE J1349

More information

R 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications. Operating Weight 69,885 73,630 Engine Output 197 HP (145 kw)

R 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications. Operating Weight 69,885 73,630 Engine Output 197 HP (145 kw) Technical Description Hydraulic Excavator R 934 B litronic` Machine for Industrial Applications Operating Weight 69,88 73,63 Engine Output 197 HP (14 kw) Technical Data Engine Rating per ISO 9249 197 HP

More information

Machine for Industrial Applications

Machine for Industrial Applications Machine for Industrial Applications A C litronic` Operating Weight:,, lb Engine Output: hp / kw Technical Data Engine Rating per ISO hp ( kw) at rpm Model Liebherr D S according to level IIIA / Tier Type

More information

350 MH. Material Handler

350 MH. Material Handler 0 MH Material Handler The Cat 0 Material Handler is specifically designed for the scrap and material handling customer. This machine uses the most sophisticated manufacturing technology to ensure the highest

More information

TECHNICAL DATA MATERIAL HANDLER F-SERIES. mhl 350 mhl hp up to 90,169 lbs up to 52'9"

TECHNICAL DATA MATERIAL HANDLER F-SERIES. mhl 350 mhl hp up to 90,169 lbs up to 52'9 TECHNICAL DATA MATERIAL HANDLER F-SERIES mhl 350 mhl 355 214 hp up to 90,169 lbs up to 52'9" mhl350 mhl355 F-Series MORE THAN ONE MATERIAL HANDLER. Fuchs F-Series Material Handlers benchmark for power

More information

Machine for Industrial Applications

Machine for Industrial Applications Machine for Industrial Applications A 9 C litronic` Operating Weight: 8, 8, lb Engine Output: hp / kw Technical Data Engine Rating per ISO 99 hp ( kw) at 8 rpm Model Liebherr D 9 L according to level IIIA

More information

TECHNICAL DATA TIMBER HANDLING MACHINES

TECHNICAL DATA TIMBER HANDLING MACHINES TECHNICAL DATA TIMBER HANDLING MACHINES Timber handling machines mhl 334 f 115 kw 22 27 t mhl 354 f 160 kw 32 36.8 t up to 11 m up to 11.3 m Page 04 Page 08 02 mhl 364 f 190 kw 45 51 t mhl 350 f hd 160

More information

R 924 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications

R 924 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications Technical Description Hydraulic Excavator R 924 B litronic` Machine for Industrial Applications Operating Weight 9,63 66, lb Engine Output 173 HP (127 kw) Technical Data Engine Rating per ISO 9249 173

More information

M325B MH Wheeled Material Handler

M325B MH Wheeled Material Handler M2B MH Wheeled Material Handler Engine Engine Model 11 TA Net Flywheel Power 12 kw 18 hp Operating Specifications Maximum Reach. m.9 ft Cat Cab Riser 1.9 m.4 ft Weights Operating Weight 7 2 kg 82,4 lb

More information

MHL340 E TECHNICAL DATA MHL 340

MHL340 E TECHNICAL DATA MHL 340 MHL340 E TECHNICAL DATA MHL 340 MHL340 E Technical Data TECHNICAL DATA OPERATING WEIGHT WITHOUT ATTACHMENTS MHL340 E MHL340 E FQC DIESEL ENGINE 28.0 t 29.5 t 28.0 t 31.8 t Manufacturer and model Deutz

More information

Energy 13 m. TIER IVf emission. standards

Energy 13 m. TIER IVf emission. standards t Energy 13 m TIER IVf emission standards PRELIMINARY Technical data, equipment MACHINE TYPE Model (type) 718 Power Model Cooling Air filter Design UPPERCARRIAGE Central lubrication Electrical system Safety

More information

PRELIMINARY. 92 kw. 16 t. Mobile telescopic crane. 24 m. Tier IV emission standards

PRELIMINARY. 92 kw. 16 t. Mobile telescopic crane. 24 m. Tier IV emission standards 9 kw 1 t Mobile telescopic crane m Tier IV emission standards Advanced. The E-Series What makes up the E-Series 197: TX telescopic crane Over 5 years of experience in construction and building of highly

More information

A 934 C HD ERC. Machine for Industrial Applications. 129 kw / 175 HP. Engine Output (SAE J1349): Engine Output (ISO 9249):

A 934 C HD ERC. Machine for Industrial Applications. 129 kw / 175 HP. Engine Output (SAE J1349): Engine Output (ISO 9249): Machine for Industrial Applications A 934 C HD ERC Operating Weight: Engine Output (SAE J1349): Engine Output (ISO 9249): 92,370 94,360 lbs 129 kw / 173 HP 129 kw / 175 HP With the award-winning ERC system

More information

A 934 C ERC. Machine for Industrial Applications. 129 kw / 175 HP. Engine Output (SAE J1349): Engine Output (ISO 9249):

A 934 C ERC. Machine for Industrial Applications. 129 kw / 175 HP. Engine Output (SAE J1349): Engine Output (ISO 9249): Machine for Industrial Applications A 934 C ERC Operating Weight: Engine Output (SAE J1349): Engine Output (ISO 9249): 83,650-84,350 lb 129 kw / 173 HP 129 kw / 175 HP With the award-winning ERC system

More information

Machine for Industrial Applications A 934 C HD

Machine for Industrial Applications A 934 C HD Machine for Industrial Applications A 9 C HD litronic` High Rise Operating Weight:,00 6,00 kg Engine Output: 0 kw / 0 HP Technical Data Engine Rating per ISO 99 0 kw (0 HP) at,800 RPM Model Liebherr D

More information

Design 6-cylinder, turbocharged diesel, charge air cooler

Design 6-cylinder, turbocharged diesel, charge air cooler Material Handler NET ENGINE POWER 153 hp (4 kw) @ 2,000 rpm OPERATING 48,501-51,808 lbs WEIGHT (22-23.5 t) MAX REACH 36' - 39' 4" (.0-12.0 m) MAX LIFTING CAPACITY 27,500 lbs (12,500 kg) MATERIAL HANDLER

More information

Wheeled Excavator A 900 C. Operating Weight: 36,800-42,800 lb Engine Output: 95 kw / 129 HP Bucket Capacity: yd³

Wheeled Excavator A 900 C. Operating Weight: 36,800-42,800 lb Engine Output: 95 kw / 129 HP Bucket Capacity: yd³ Wheeled Excavator A 9 C Operating : 36,8-42,8 lb Engine Output: 9 kw / 129 HP Bucket Capacity:.37-1. yd³ A 9 C Operating : 36,8-42,8 lb Engine Output: 9 kw / 129 HP Bucket Capacity:.37-1. yd³ 2 A 9 C Litronic

More information

Machine for Industrial Applications

Machine for Industrial Applications Machine for Industrial Applications A 95 C HD litronic` High Rise Operating Weight: 79,95 87,55 kg Engine Output: kw / 36 HP Technical Data Engine Rating per ISO 99 kw (36 HP) at 18 RPM Model Liebherr

More information

PRELIMINARY. 92 kw. 16 t. Telescopic crawler crane. 24 m. Tier IV emission standards

PRELIMINARY. 92 kw. 16 t. Telescopic crawler crane. 24 m. Tier IV emission standards 9 kw 1 t Telescopic crawler crane m Tier IV emission standards Advanced. The E-Series What makes up the E-Series 197: TX telescopic crane Over 5 years of experience in construction and building of highly

More information

Machine for Industrial Applications LH 22 M

Machine for Industrial Applications LH 22 M Machine for Industrial Applications LH 22 M litronic` Operating Weight: 48,7, lb Engine: 34 HP / kw Stage Tier 3 Technical Data Engine Rating per SAE J349 34 HP ( kw) at,8 rpm Model Liebherr D834 Type

More information

Technical Description Hydraulic Excavator A 310 B. Operating Weight 11,1 11,9 t Engine Output 58 kw (79 HP) Bucket Capacity 0,10 0,45 m 3

Technical Description Hydraulic Excavator A 310 B. Operating Weight 11,1 11,9 t Engine Output 58 kw (79 HP) Bucket Capacity 0,10 0,45 m 3 Technical Description Hydraulic Excavator A B Operating Weight,, t Engine Output kw ( HP) Bucket Capacity,, m Technical Data Engine Deutz-Diesel engine Rating per ISO kw ( HP) at RPM Model BF M E Typ cylinder-in-line,

More information

TECHNICAL DATA PRELIMINARY BROCHURE MATERIAL HANDLER F-SERIES. mhl hp up to 70,107 lbs up to 44'11"

TECHNICAL DATA PRELIMINARY BROCHURE MATERIAL HANDLER F-SERIES. mhl hp up to 70,107 lbs up to 44'11 TECHNICAL DATA PRELIMINARY BROCHURE MATERIAL HANDLER F-SERIES mhl 4 1 hp up to,1 lbs up to 44'11" mhl4 F-Series TECHNICAL DATA OPERATING WEIGHT WITHOUT ATTACHMENTS MHL4 F MHL4 F FQC DIESEL ENGINE Manufacturer

More information

MHL250 E-SERIES TECHNICAL DATA MHL 250 E. 85 kw t up to 9.0 m

MHL250 E-SERIES TECHNICAL DATA MHL 250 E. 85 kw t up to 9.0 m MHL250 E-SERIES TECHNICAL DATA MHL 250 E 85 kw 14.0 15.5 t up to 9.0 m MHL250 E Introduction THE NEW MHL2 SERIES: REVOLUTIONARY FOR THE RECYCLING INDUSTRY. Greater mobility and flexibility in material

More information

Machine for Industrial Applications A 954 C HD

Machine for Industrial Applications A 954 C HD Machine for Industrial Applications A 95 C HD litronic` High Rise Operating Weight: 83, 90,9 kg Engine Output: 0 kw / 36 HP Technical Data Engine Rating per ISO 99 0 kw (36 HP) at 1,800 RPM Model Liebherr

More information

Machine for Industrial Applications A 944 C HD

Machine for Industrial Applications A 944 C HD Machine for Industrial Applications A 9 C HD litronic` Operating Weight: 57, 58,5 kg Engine Output: 19 kw / 58 HP Technical Data Engine Rating per ISO 99 19 kw (58 HP) at 1,8 RPM Model Liebherr D 936 L

More information

MATERIAL HANDLER MHL360 F. Specifications. Features

MATERIAL HANDLER MHL360 F. Specifications. Features MHL360 F MATERIAL HANDLER Features Specifications Fuel saving ECO & ECO+ operating modes enhance flexibility while reducing operating costs Powerful, fuel efficient 255 hp 190 kw engine matched with hydraulic

More information

TECHNICAL DATA MATERIAL HANDLER. mhl hp up to 34,172 lbs up to 29'6"

TECHNICAL DATA MATERIAL HANDLER. mhl hp up to 34,172 lbs up to 29'6 TECHNICAL DATA MATERIAL HANDLER mhl 250 114 hp up to 34,172 lbs up to 29'6" MHL250 E Introduction THE NEW "MHL2 SERIES: REVOLUTIONARY FOR THE RECYCLING INDUSTRY. Greater mobility and flexibility in material

More information

R 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications. Operating Weight 31,7 33,4 t Engine Output 145 kw (197 HP)

R 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications. Operating Weight 31,7 33,4 t Engine Output 145 kw (197 HP) Technical Description Hydraulic Excavator R 934 B litronic` Machine for Industrial Applications Operating Weight 31,7 33,4 t Engine Output 14 kw (197 HP) Technical Data Engine Rating per ISO 9249 14 kw

More information

B75W COMPACT WHEELED EXCAVATOR. Operating weight Dig depth Engine power Bucket capacity Lifting force (arm) Breakout force at bucket edge

B75W COMPACT WHEELED EXCAVATOR. Operating weight Dig depth Engine power Bucket capacity Lifting force (arm) Breakout force at bucket edge COMPACT WHEELED EXCAVATOR B75W Operating weight Dig depth Engine power Bucket capacity Lifting force (arm) Breakout force at bucket edge 7 400-8 000 kg 3,5-3,9 m 55,4 kw (75 hp) 87 303 l 38 kn 30 kn Compact

More information

AC ALL TERRAIN CRANE

AC ALL TERRAIN CRANE All Terrain Crane 200 t Lifting Capacity ALL TERRAIN CRANE Due to the newly optimized boom system, the has higher duties compared to its predecessor the AC 160-1 Very compact 5-axle crane with a carrier

More information

224 kw. 54,5 t. Crawler material handling machine 20 m. TIER IVf

224 kw. 54,5 t. Crawler material handling machine 20 m. TIER IVf 4 kw 54,5 t Crawler material handling machine 0 m TIER IVf Further developed. The E-Series. The characteristics of the E-Series 0 years of experience in the design and construction of hydraulic material

More information

LH 50 M. Machine for Industrial Applications. Engine Output (SAE J1349): 188 HP / 140 kw Engine Output (ISO 9249):

LH 50 M. Machine for Industrial Applications. Engine Output (SAE J1349): 188 HP / 140 kw Engine Output (ISO 9249): Machine for Industrial Applications LH M litronic` High Rise Operating Weight: 12, 13,3 lb Engine Output (SAE J1349): 188 HP / 14 kw Engine Output (ISO 9249): 19 HP / 14 kw Max. System Performance (SAE

More information

LH 120 M. Machine for Industrial Applications

LH 120 M. Machine for Industrial Applications Machine for Industrial Applications LH 1 M litronic` Operating Weight: 308,450 336,0 lb Engine Output (SAE J1349): 536 HP / 400 kw Engine Output (ISO 9249): 543 HP / 400 kw Technical Data Engine Rating

More information

AC 140 ALL TERRAIN CRANE

AC 140 ALL TERRAIN CRANE All Terrain Crane 170 t Lifting Capacity ALL TERRAIN CRANE HIGHLIGHTS 17,650 lb counterweight carried on the crane giving just 26,450 lb axle load 196.9 ft main boom and optional 29.9 ft to 108.3 ft boom

More information

litronic` Timber Operating Weight: 29,300 kg Engine Output: 140 kw / 190 HP

litronic` Timber Operating Weight: 29,300 kg Engine Output: 140 kw / 190 HP Log Loader LH 35 M litronic` Timber Operating Weight: 29,300 kg Engine Output: 140 kw / 190 HP Technical Data Engine Rating per ISO 9249 140 kw (190 HP) at 1,800 RPM Model Liebherr D934 according to stage

More information

litronic` Timber Engine Output (SAE J1349): 188 HP / 140 kw Engine Output (ISO 9249): 190 HP / 140 kw

litronic` Timber Engine Output (SAE J1349): 188 HP / 140 kw Engine Output (ISO 9249): 190 HP / 140 kw Log Loader LH 35 M litronic` Timber Operating Weight: 64,600 lb Engine Output (SAE J1349): 188 HP / 140 kw Engine Output (ISO 9249): 190 HP / 140 kw Technical Data Engine Rating per SAE J1349 188 HP (140

More information

PRELIMINARY 10 / kw / 168 kw. 120 t. Telescopic Crawler Crane. 40 m. TIER IVf

PRELIMINARY 10 / kw / 168 kw. 120 t. Telescopic Crawler Crane. 40 m. TIER IVf 164 kw / 168 kw 120 t Telescopic Crawler Crane 40 m TIER IVf Technical data - equipment MACHINE TYPE Model (type) 6113 Automatic central lubrication for boom pivot winch drum bearing Pinion lubrication

More information

R 944 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications Operating Weight 39,2 41,6 t Engine Output 180 kw (245 HP)

R 944 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications Operating Weight 39,2 41,6 t Engine Output 180 kw (245 HP) Technical Description Hydraulic Ecavator R 9 B litronic` Machine for Industrial Applications Operating Weight 39, 1,6 t Engine Output 18 kw (5 HP) The Better Machine. Engine Rating per ISO 99 18 kw (5

More information

RHL 350 RHL 350. Scrap. Specifications. Operating voltage. Generator system 13/20 kw. Displacement 436 cu in (7.2 l)

RHL 350 RHL 350. Scrap. Specifications. Operating voltage. Generator system 13/20 kw. Displacement 436 cu in (7.2 l) Scrap ENGINE POWER OPERATING WEIGHT 190hp (142 kw) 87,082 88,185 lbs (39,500 40,000 kg) Max Reach 44' 4" 49' 2" (13.5 15m) Max Lifting Capacity 33,750 33,950lbs (15,300 15,400 kg) SCRAP Specifications

More information

Undercarriage. Lubricant and Coolant Capacity. Travel System

Undercarriage. Lubricant and Coolant Capacity. Travel System MATERIAL HANDLER Operating Weight: 76,49 lbs (8, kg) SAE Net Horsepower: with fan pump 49 HP (69 kw) without fan pump HP (97 kw) Swing Torque: 96,6 lbf-ft. (66. kn m) Engine Isuzu AH-6WGXYSS- Tier turbocharged

More information

PRELIMINARY NEW! 186 kw. 40 t. Heavy Duty Cycle Crawler / Crane 41.1 m TIER IV

PRELIMINARY NEW! 186 kw. 40 t. Heavy Duty Cycle Crawler / Crane 41.1 m TIER IV PRELIMINARY NEW! 1 kw 0 t Heavy Duty Cycle Crawler / Crane 1.1 m TIER IV Further developed. The E-Series. The characteristics of the E-Series 0 years of experience in the design and construction of duty

More information

PRELIMINARY. 224 kw t. Mobile material handling machine 11.3 m. Level IV

PRELIMINARY. 224 kw t. Mobile material handling machine 11.3 m. Level IV PRELIMINARY 224 kw 43.9 t Mobile material handling machine 11.3 m Level IV Further developed. The E-Series. The characteristics of the E-Series 60 years of experience in the design and construction of

More information

Dimensions. Optional Equipment. MINI EXCAVATOR Applied Tier 2 Engine PLEASE CONTACT

Dimensions. Optional Equipment. MINI EXCAVATOR Applied Tier 2 Engine PLEASE CONTACT Dimensions 1,650 986 Standard Equipment Working ranges ISO standard cabin Cabin ROPS(ISO 3471) FOPS(ISO 3449) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up

More information

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)

More information

7 SERIES MINI EXCAVATOR

7 SERIES MINI EXCAVATOR Dimensions 1,650 986 Standard Equipment 2,850 2,610 290 6,100 2,100 1,600 1,925 7 SERIES MINI EXCAVATOR ISO standard cabin Cabin ROPS(ISO 3471) FOPS(ISO 3449) TOPS(ISO 12117) All-weather steel cab with

More information

Stationary Electric Material Handlers. EP 934 C Working Radius: m EP 944 C Working Radius: m EP 954 C Working Radius: m

Stationary Electric Material Handlers. EP 934 C Working Radius: m EP 944 C Working Radius: m EP 954 C Working Radius: m Stationary Electric Material Handlers EP 934 C Working Radius: 13-20 m EP 944 C Working Radius: 15-22 m EP 954 C Working Radius: 16-24 m EP 934 C Working radius: 13-20 m Motor rating: 160 kw/ 217 hp Weight:

More information

TECHNICAL DATA MATERIAL HANDLER F-SERIES AND F HD-SERIES. mhl kw t up to 18.0 m

TECHNICAL DATA MATERIAL HANDLER F-SERIES AND F HD-SERIES. mhl kw t up to 18.0 m TECHNICAL DATA MATERIAL HANDLER F-SERIES AND F HD-SERIES mhl 6 19 kw 4.5 5.2 t up to 18. m mhl6 F-Series THE NEW F-SERIES. THE FUTURE OF MATERIAL HANDLING IS NOW. Brand new design meets brand new features.

More information

www. terex-cranes.com AC AC 200-1

www. terex-cranes.com AC AC 200-1 Shortest 200-tonner on 5 axles with 41.3 carrier length 7-section 2 boom with Unimec telescoping and pinning system giving unequalled 328.1 combined boom-andjib length with the 8.3 boom extension fitted

More information

AC ALL TERRAIN CRANE

AC ALL TERRAIN CRANE AC 250-1 All Terrain Crane 300 t Lifting Capacity AC 250-1 ALL TERRAIN CRANE Longest main boom in its category with unequalled 262.5 ft Speed-dependent rear axle steering for increased manoeuvrability

More information

litronic` Timber Engine Output (SAE J1349): 201 HP / 150 kw Engine Output (ISO 9249): 204 HP / 150 kw

litronic` Timber Engine Output (SAE J1349): 201 HP / 150 kw Engine Output (ISO 9249): 204 HP / 150 kw Log Loader LH 50 M litronic` Timber Operating Weight: 82,100 lb Engine Output (SAE J1349): 201 HP / 150 kw Engine Output (ISO 9249): 204 HP / 150 kw Technical Data Engine Rating per SAE J1349 201 HP (150

More information

AC ALL TERRAIN CRANE

AC ALL TERRAIN CRANE All Terrain Crane 240 t Lifting Capacity ALL TERRAIN CRANE Shortest 200-tonner on 5 axles with 41.3 ft carrier length 7-section 223 ft boom with Unimec telescoping and pinning system giving unequalled

More information

Rough Terrain Crane. 65 U.S. Tons (59 Metric 10 ft Radius ft, 5 Section Main Boom 30.2 ft 52.5 ft Boom Extension.

Rough Terrain Crane. 65 U.S. Tons (59 Metric 10 ft Radius ft, 5 Section Main Boom 30.2 ft 52.5 ft Boom Extension. SRC865XL Rough Terrain Crane 65 U.S. Tons (59 Metric Tons) @ 10 ft Radius 139.4 ft, 5 Section Main Boom 30.2 ft 52.5 ft Boom Extension Product Guide key FEATURES OPERATOR S CAB Spacious ergonomic cab with

More information

268 kw (Stage IIIa) 261 kw (Stage V) 250 kw (Electro) 68.5 t. 21 m. Crawler material handler. Stage V

268 kw (Stage IIIa) 261 kw (Stage V) 250 kw (Electro) 68.5 t. 21 m. Crawler material handler. Stage V 268 kw (Stage IIIa) 261 kw (Stage V) 250 kw (Electro) 68.5 t Crawler material handler 21 m Stage V Advanced. The E-Series What makes up the E-Series 1962: rope-driven S833 with elevated operator cab 65

More information

UPTime is the Manitex commitment to complete support of thousands of units working every day.

UPTime is the Manitex commitment to complete support of thousands of units working every day. UPTime is the Manitex commitment to complete support of thousands of units working every day. MANITEX 3000 South Austin Avenue Georgetown, Texas 78626 1-877-314-3390 www.manitex.com MTX-M150-PC-EN-V2-0614

More information

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,

More information

Specif ications R125LCR-9A

Specif ications R125LCR-9A Specif ications R125LCR-9A ENGINE MODEL PERKINS 1204E Water cooled, 4 cycle Diesel, 4-cylinders Type in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel horse power

More information

TECHNICAL DATA MATERIAL HANDLER F-SERIES. mhl kw t up to 24.5 m

TECHNICAL DATA MATERIAL HANDLER F-SERIES. mhl kw t up to 24.5 m TECHNICAL DATA MATERIAL HANDLER F-SERIES mhl 390 300 kw 76.2 87.0 t up to 24.5 m mhl390 F-Series RAISE YOUR DEMANDS. AND YOUR CABIN. Making light work of heavy duty. Coal, grain, logs, scrap, big bags

More information

TADANO ROUGH TERRAIN CRANE : GR-700EX. (Left-hand steering) G E N E R A L D ATA

TADANO ROUGH TERRAIN CRANE : GR-700EX. (Left-hand steering) G E N E R A L D ATA SPEC. SHEET No. GR-7E-1-214/EU-51 DATE June, 21 TADANO ROUGH TERRAIN CRANE MODEL : GR-7EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY BOOM 7, kg at 3. m 5-section, 11.5 m 44. m DIMENSION Overall

More information

MANTSINEN. HybriLift. More load, less energy.

MANTSINEN. HybriLift. More load, less energy. 2 HybriLift More load, less energy. 2 HybriLift The strongest and fastest for superior productivity. Uusikaupunki, Finland HybriLift Increases Energy Efficiency by up to 35% Tuapse, Russia Antwerp, Belgium

More information

NEW 7 SERIES MINI EXCAVATOR. Yanmar 4TNV94L Engine. Bucket capacity, SAE 0.07~0.18m 3 (0.09~0.24yd 3 ) R55W-7_taal_en :20 Pagina 1

NEW 7 SERIES MINI EXCAVATOR. Yanmar 4TNV94L Engine. Bucket capacity, SAE 0.07~0.18m 3 (0.09~0.24yd 3 ) R55W-7_taal_en :20 Pagina 1 R55W-7_taal_en 05-09-2005 15:20 Pagina 1 NEW 7 SERIES MINI EXCAVATOR Yanmar 4TNV94L Engine 42kW/57HP Operating weight 5,450 (12,020 ) Bucket capacity, SAE 0.07~0.18m 3 (0.09~0.24yd 3 ) Photo may include

More information

SPEC. SHEET No. GR-800E /EU-01 DATE November, 2012 TADANO ROUGH TERRAIN CRANE M ODEL : GR-800EX (Left-hand steering) G E N E R A L D ATA CRANE

SPEC. SHEET No. GR-800E /EU-01 DATE November, 2012 TADANO ROUGH TERRAIN CRANE M ODEL : GR-800EX (Left-hand steering) G E N E R A L D ATA CRANE DATE November, 212 TADANO ROUGH TERRAIN CRANE M ODEL : GR-8EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY 8, kg at 3. m BOOM 5-section, 12. m 47. m DIMENSION Overall length approx. 14,375 mm

More information

Material Handling Machine LH 150 Port

Material Handling Machine LH 150 Port Material Handling Machine LH 150 Port litronic` Operating Weight: 286,600 485,000 lb Engine: 536 HP / 400 kw (SAE J1349) 543 HP / 400 kw (ISO 9249) Stage Tier 4f Electro Max. System Performance: 614 kw

More information

WHEEL LOADER WHEEL LOADER. ZW series Parallel linkage tool carrier version

WHEEL LOADER WHEEL LOADER. ZW series Parallel linkage tool carrier version ZW series Parallel linkage tool carrier version WHEEL LOADER WHEEL LOADER Model Code: ZW140PL / ZW150PL / ZW1PL Operating Weight: ZW140PL: 11 950-12 010 ZW150PL: 13 370-13 400 ZW1PL: 15 240-15 430 Bucket

More information

40,8 kw / 54,7 Hp at rpm kg mm. DX55w. Compact Equipment

40,8 kw / 54,7 Hp at rpm kg mm. DX55w. Compact Equipment 40,8 kw / 54,7 Hp at 2.400 rpm 5.550 kg 3.495-3.795 mm DX55w Compact Equipment Doosan DX55w hydraulic excavator: a new model with novel features The new DX55w hydraulic excavator offers additional value

More information

TADANO ROUGH TERRAIN CRANE : GR-300EX. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m

TADANO ROUGH TERRAIN CRANE : GR-300EX. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m TADANO ROUGH TERRAIN CRANE MODEL : GR-300EX (Left-hand steering) GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION MASS Overall length approx. 11,245 mm Overall width

More information

330C MH Material Handler

330C MH Material Handler 330C MH Material Handler Engine Engine Model C9 Net Flywheel Power 184 kw 247 hp Operating Specifications Max. Reach 15.9 m 52.2 ft Cat Cab Riser 1.96 m 6.4 ft Weights Operating Weight 43 815 kg 96,595

More information

TADANO ROUGH TERRAIN CRANE : GR-550EX. (Left-hand steering) G E N E R A L D ATA

TADANO ROUGH TERRAIN CRANE : GR-550EX. (Left-hand steering) G E N E R A L D ATA DATE June, 21 TADANO ROUGH TERRAIN CRANE MODEL : GR-55EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY 55, kg at 3. m BOOM 5-section, 11.1 m - 42.m DIMENSION Overall length Overall width Overall

More information

TECHNICAL DATA PRELIMINARY BROCHURE MATERIAL HANDLER F-SERIES. mhl kw t up to 22.0 m

TECHNICAL DATA PRELIMINARY BROCHURE MATERIAL HANDLER F-SERIES. mhl kw t up to 22.0 m TECHNICAL DATA PRELIMINARY BROCHURE MATERIAL HANDLER F-SERIES mhl 380 273 kw 65 70 t up to 22.0 m mhl380 F-Series EQUIPMENT AND OPTIONS. The latest technology, tailor made for you Joystick Steering* Improved

More information

5080 MH. Material Handler. Cat 3406DI ATAAC Diesel Engine. Operating weight (average)

5080 MH. Material Handler. Cat 3406DI ATAAC Diesel Engine. Operating weight (average) 5080 MH Material Handler Cat 3406DI ATAAC Diesel Engine Flywheel Power Operating weight (average) Drawbar Pull (average) Travel Speed range 428 hp 218,700 lb 122,850 lb 1.6 to 2.8 mph 5080 Material Handler

More information

TADANO TRUCK CRANE. Provisional Specifications GENERAL DATA. 4-section, 10.5 m 33.0 m

TADANO TRUCK CRANE. Provisional Specifications GENERAL DATA. 4-section, 10.5 m 33.0 m DATE July, 2006 TADANO TRUCK CRANE MODEL : TL-300E Provisional Specifications GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 10.5 m 33.0 m DIMENSION MASS Overall length approx. 12,670 mm

More information

97/119 kw. 23.9/25.1 t. Mobile material handling machine 9 12 m. Tier 3b emission standards

97/119 kw. 23.9/25.1 t. Mobile material handling machine 9 12 m. Tier 3b emission standards 97/119 kw 23.9/25.1 t Mobile material handling machine 9 12 m Tier 3b emission standards Advanced. The E-Series. 1962: Rope-driven S833 with elevated operator cab What makes up the E-Series 60 years of

More information

STABLE. STRONG. STEADY.

STABLE. STRONG. STEADY. 13.8-15.7 t 90 kw (121 HP) 0.7-1.0 m 3 STABLE. STRONG. STEADY. WheelED Excavator 140W www.atlasgmbh.com Technical specification 140W Technical specification ENGINE Power rating... 90 kw (121 HP) Number

More information