TECHNICAL DATA MATERIAL HANDLER F-SERIES. mhl 350 mhl hp up to 90,169 lbs up to 52'9"

Size: px

Start display at page:

Download "TECHNICAL DATA MATERIAL HANDLER F-SERIES. mhl 350 mhl hp up to 90,169 lbs up to 52'9""

Derrick Walters
5 years ago
Views:

1 TECHNICAL DATA MATERIAL HANDLER F-SERIES mhl 350 mhl hp up to 90,169 lbs up to 52'9"

2 mhl350 mhl355 F-Series MORE THAN ONE MATERIAL HANDLER. Fuchs F-Series Material Handlers benchmark for power Sensitive hydraulic and application- management. Power is important. What is even more impor

3 Featuring a three-stage power operation, that - ing rates

4 mhl350 mhl355 F-Series EXPERIENCE THE IMPACT OF UNIQUE PRODUCTIVITY. Handling all kinds of material can be so easy and fast if you rely on innovations made by Fuchs. 04

5 The MHL350 F material handler sets the more sophisticated hydraulics and an exceptionally comfortable driver s cabin. Driver s Cab ' " Air Conditioning High Performance Cooling System Fuchs Service Platform Engine 05

6 mhl350 mhl355 F-Series STANDS STRONG. WORKS HARD. ACHIEVES MORE. MHL355 F: excellence is best based on a solid foundation. stability. 06

7 EQUIPMENT AND OPTIONS. 214 hp diesel engine Constant cooling Air conditioning 07

8 mhl350 mhl355 F-Series Joystick Steering Multifunction Button 7" Multi-Function Touch Display 08

9 CAN BUS and Rapid Fuse Tester Built-in Fuchs Quality * special equipment on demand 09

10 mhl350 mhl355 F-Series TECHNICAL DATA OPERATING WEIGHT MHL350 F MHL355 F ENGINE Manufacturer & model Type Engine control Engine operation Nominal speed Displacement Cooling system Exhaust emission standard Fuel tank DEF tank Deutz TCD 6.1 L6 6-cylinder inline EMR IV er, controlled exhaust gas recirculation, diesel particulate regenerationcat 214 hp 2,000 rpm 372 cui system; optional reversing function and pre-separator with discharge valve 315 l Diesel ELECTRICAL SYSTEM Alternator Voltage Batteries Lights Optional TRANSMISSION 28 V / 0 A 24 V 2 H3 headlamps, turn indicators and tail lights 13 kw or 20 kw DC generator with controls and insulation monitoring, driven by V-belt direct from diesel engine travel brake valve, two-speed manual gearshift, 4-wheel drive Travel speed 1st gear Travel speed 2nd gear max. 3 mph max. 12 mph Gradeability max. 39 % Turning radius SWING DRIVE Drive 26'2" Internally toothed double-row ball ring gear 3-stage planetary gear with integrated multi-disc brake Electrically operated 17984,7 lbf ft UNDERCARRIAGES Front axle Rear axle MHL350 F Planetary drive axle with integrated drum brake, rigidly mounted, max. steering angle 27 Oscillating axle with integral drum brake and selectable oscillating axle lock MHL355 F Planetary drive axle with integrated drum brake, rigidly mounted, max. steering angle 27 Oscillating planetary drive rear axle with integrated drum brake and selectable oscillating axle lock Stabilization 4-point stabilizer system 4-point stabilizer system Tires Solid rubber, 8-ply Solid rubber, 8-ply BRAKING SYSTEM Service brake Parking brake HYDRAULIC SYSTEM Hydraulic single-circuit braking system acting on all four wheel pairs Electrically operated disc brake on transmission acting on both front and rear axles LINDE mobile hydraulic system with load limit control and fuelsaving power demand control. Separate hydraulic oil cooler, temperature-controlled fan speed Max. pressure Hydraulic tank OPERATOR S CAB Cab Air-conditioning Operator s seat Monitoring Sound levels with 3,000 operating hours service interval 2 x 87 gal/ min 4,641/ 5,221 psi 141 gal usable tank capacity up to 18'4" above ground. Flexibly mounted. Sound-insulated; heat-insulating glass panoramic windows for optimum all-around view; windshield with pull-down sunblind that slides under the cab roof; viewing window on cab roof; sliding window in cab door; Joystick steering. Air-cushioned high-comfort seat with integrated headrest, safety belt and lumbar support, seat heating with integrated a/c function optional. Seat position, seat inclination and seat pilot control units, allowing comfortable operation. Ergonomic layout; glare-free instrumentation. Multifunction display, automatic monitoring and recording of abnormal oper- - shutdown of pilot control/ engine power reduction. Diagnosis of individual sensors available via the multi-function display. Rear view camera.

11 Technical data EQUIPMENT ENGINE Standard Option Charge air cooling Automatic idle Engine preheating Engine diagnostics interface System-controlled fan drive with fan speed monitoring UNDERCARRIAGE All-wheel drive with differential Drum brakes Rear axle oscillating lock 2-speed powershift transmission 4-point stabilizers Stabilizer cylinders with integrated two-way check valves Piston rod protection on stabilizer cylinders Stabilizer plates in 4-point stabilizers, individually controllable Tool box UPPERCARRIAGE Separate cooling systems Cooling system fan speeds controlled by operating parameters Fan drive reversing function Lockable maintenance hatches, with gas struts Automatic central lubrication system Rear view camera Electric refuelling pump Lighting protection CAB Safety glass, front and top Sliding window in cab door Glazed roof panel CAB Standard Option Joystick steering Windscreen washer system Air-cushioned operator seat with headrest, seatbelt, and lumbar support Seat heating with integrated A/C function Automatic air conditioning system Independent heating system Multi-function display Document clip Protective grilles to front and roof 12 V transformer 12 V socket Fire extinguisher, dry powder Rotating beacon with travel alarm EQUIPMENT 13 kw DC generator with controls 20 kw DC generator with controls Close proximity range limiter for dipperstick Coolant and hydraulic oil level monitoring system Filter system for attachments Hose rupture value for boom cylinder Hose rupture value for stick cylinder Overload and work area control Overload warning device Quick coupling on dipperstick Stick protection Hydraulic oil preheating 230 V Float switch Lubrication of the grab suspension by central lubrication system Light packages H3 or LED H3 front headlights Fuchs Telematics System Further optional equipment available on request! 11

12 mhl350 F-Series DIMENSIONS MHL350 F 9'4" 1'5" 4'9" 9' 11'2" 7" 9'" 18'5" 5'" 9'9" 14'4" 15'8" 12 1'9" 1' 9'4" 6'2" 9'"

Technical data TRANSPORT DIMENSIONS MHL350 F 7" 11'1" 6'7" B 5'7" 4'5" A 9'11" 11'1" C Average center of gravity in transport position Dimensions Reach 52'5" Reach 49'2" A 41'2" 41'4" B 18'4" 21'1" C

13 Technical data TRANSPORT DIMENSIONS MHL350 F 7" 11'1" 6'7" B 5'7" 4'5" A 9'11" 11'1" C Average center of gravity in transport position Dimensions Reach 52'5" Reach 49'2" A 41'2" 41'4" B 18'4" 21'1" C 11'9" 9'" Reach 48'2" With multi-purpose stick 7" 9'" 21'1" 5'7" Average center of gravity in transport position 4'5" 41'4" LOADING SYSTEMS WITH DIPPERSTICK OR MULTI-PURPOSE STICK MHL350 MHL355 Component Reach 52'5" Reach 49'2" Reach 52'5" Straight boom 27'" Dipperstick 20'4" Dipperstick 20'4" Multi-purpose stick 18'4" 13

14 mhl350 F-Series WORKING RANGE 60 REACH 52'5" WITH DIPPER STICK Dipper stick 23'7" Cactus grab RECOMMENDED ATTACHMENTS Fuchs cactus grab 0.78 yd³ Open or half-closed Fuchs magnetic plate MP 1150 Clamshell grab 1.30 yd³ Density of materials handled up to 49.9 lbs/ft³ ,221 psi. In accordance with ISO 567 the lift capacity values represents 75% of the direction of the undercarriage. The values for not supported only apply via the steering axle or the locked oscillating axle. The weights of the attached load hoisting equipment application hose rupture valves on the boom and stick cylinders, an overload warning the machine has to be supported on a level ground Reach in ft Rotation center LIFTING CAPACITY Height [ft] Undercarriage outrigger 55 4-point supported Reach [ft] point supported 45 4-point supported 40 4-point supported 35 4-point supported 30 4-point supported 25 4-point supported 20 4-point supported 15 4-point supported 4-point supported 5 4-point supported 0 4-point supported 5 4-point supported 4-point supported Max. reach 52'9" point supported 14

15 Technical data WORKING RANGE REACH 49'2" WITH DIPPER STICK 50 Dipper stick 20'4" Cactus grab 40 RECOMMENDED ATTACHMENTS 30 Fuchs cactus grab 0.78 yd 3 Open or half-closed Fuchs cactus grab 1.04 yd 3 Open or half-closed Fuchs magnetic plate MP Clamshell grab 1.83 yd 3 Density of materials handled up to lbs/ft³ Clamshell grab 2.09 yd 3 Density of materials handled up to lbs/ft³ Lift hook 22,046 lbs 5,221 psi. In accordance with ISO 567 the lift capacity values represents 75% of the direction of the undercarriage. The values for not supported only apply via the steering axle or the locked oscillating axle. The weights of the attached load hoisting equipment application hose rupture valves on the boom and stick cylinders, an overload warning the machine has to be supported on a level ground Reach in ft Rotation center LIFTING CAPACITY Height [ft] Undercarriage outrigger Reach [ft] point supported 45 4-point supported 40 4-point supported 35 4-point supported 30 4-point supported 25 4-point supported 20 4-point supported 15 4-point supported 4-point supported 5 4-point supported 0 4-point supported 5 4-point supported 4-point supported Max. reach 49'" point supported 15

16 mhl350 F-Series WORKING RANGE 60 REACH 48'2" WITH MULTI-PURPOSE STICK Multi-purpose stick 18'4" Sorting grab ,221 psi. In accordance with ISO 567 the lift capacity values represents 75% of the direction of the undercarriage. The values for not supported only apply via the steering axle or the locked oscillating axle. The weights of the attached load hoisting equipment application hose rupture valves on the boom and stick cylinders, an overload warning the machine has to be supported on a level ground Reach in ft Rotation center LIFTING CAPACITY Height [ft] Undercarriage outrigger Reach [ft] point supported 45 4-point supported 40 4-point supported 35 4-point supported 30 4-point supported 25 4-point supported 20 4-point supported 15 4-point supported 4-point supported 5 4-point supported 0 4-point supported 5 4-point supported Max. reach 48'2" point supported 16

17 Technical data DIMENSIONS MHL355 F 9'4" 9'4" 7" 11" 2' 5'6" 9'7" 9'" 14'9" 16'6" 12'5" 11'" 1'9" 5'5" 9'7" 11'" '5" 19'7" 6'5" 9'" TRANSPORT DIMENSIONS MHL355 F 7" 20'2" 4'3" 42' 17

mhl355 F HD-Series WORKING RANGE 60 REACH 52'5" WITH DIPPER STICK Dipper stick 23'7" Cactus grab 50 40 RECOMMENDED ATTACHMENTS Fuchs cactus grab 0.

18 mhl355 F HD-Series WORKING RANGE 60 REACH 52'5" WITH DIPPER STICK Dipper stick 23'7" Cactus grab RECOMMENDED ATTACHMENTS Fuchs cactus grab 0.78 yd³ Open or half-closed Fuchs magnetic plate MP 1150 Clamshell grab 1.30 yd³ Density of materials handled up to 49.9 lbs/ft³ ,221 psi. In accordance with ISO 567 the lift capacity values represents 75% of the direction of the undercarriage. The values for not supported only apply via the steering axle or the locked oscillating axle. The weights of the attached load hoisting equipment application hose rupture valves on the boom and stick cylinders, an overload warning the machine has to be supported on a level ground Reach in ft Rotation center LIFTING CAPACITY Height [ft] Undercarriage outrigger 55 4-point supported Reach [ft] point supported 45 4-point supported 40 4-point supported 35 4-point supported 30 4-point supported 25 4-point supported 20 4-point supported 15 4-point supported 4-point supported 5 4-point supported 0 4-point supported 5 4-point supported 4-point supported Max. reach 52'9" point supported 18

Technical data MODULAR SYSTEM Attachments

Magnet plate Load hook Cactus grab Sorting

straight Work equipment with multipurpose

Pack Undercarriage Pylon Pylon Pylon Pylon

12'1" Mobile: Standardundercarriage Mobile

19 Technical data MODULAR SYSTEM Attachments Furthermore: Timber grab Scrap shears Magnet plate Load hook Cactus grab Sorting grapple Clamshell grab Work equipment straight Work equipment with multipurpose stick Work equipment with banana boom Uppercarriage MHL360 Cab system hydraulically adjustable Viewing height: max. 18'4" Engine Options Diesel engine Electric motor Cable reel Cable drum Power Pack Undercarriage Pylon Pylon Pylon Pylon Pylon up to max. 2'6" up to max. 4'6" up to max. 2'6" up to max. 12'1" up to max. 12'1" Mobile: Standardundercarriage Mobile special: For extended undercarriage Crawler: Standardundercarriage Crawler: XL-undercarriage Pedestal undercarriage 19

GET A HANDLE ON FLEET MANAGEMENT. ALL-IN-ONE MACHINE MANAGEMENT.

Available online anywhere and at any time*: comprehensive information on the GPS location, start and

User-friendly interface: displays information clearly for at a glance metrics and diagnostics.

messages are displayed in plain text messages.

20 GET A HANDLE ON FLEET MANAGEMENT. ALL-IN-ONE MACHINE MANAGEMENT. EVERYTHING AT A GLANCE: OPERATING DATA, MACHINE STATUS, GPS DATA Record, display, and analyse data: Available online anywhere and at any time*: comprehensive information on the GPS location, start and stop times, fuel consumption, operating hours, maintenance status, and much more. User-friendly interface: displays information clearly for at a glance metrics and diagnostics. Take action before damage occurs: predetermined maintenance intervals are signaled and error messages are displayed in plain text messages. The Fuchs Telematics system is optionally available or your operating costs and keep your machines in top shape. * Internet connection required equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Terex Corporation 2016 Terex, the Terex Crown design, Fuchs and Works For You are trademarks of Terex Corporation or its subsidiaries.

TECHNICAL DATA PRELIMINARY BROCHURE MATERIAL HANDLER F-SERIES. mhl hp up to 70,107 lbs up to 44'11"

TECHNICAL DATA PRELIMINARY BROCHURE MATERIAL HANDLER F-SERIES mhl 4 1 hp up to,1 lbs up to 44'11" mhl4 F-Series TECHNICAL DATA OPERATING WEIGHT WITHOUT ATTACHMENTS MHL4 F MHL4 F FQC DIESEL ENGINE Manufacturer