INTERNATIONAL DESIGN GUIDE
|
|
- Miles Palmer
- 5 years ago
- Views:
Transcription
1 INTERNTIONL DESIGN GUIDE
2 Contents 3 Built-In Refrigeration 30 PRO 48 Refrigeration 35 Integrated Refrigeration 44 ine Storage Features and specifications are subject to change at any time without notice. IMPORTNT NOTE: Throughout this guide, dimensions may vary by ± Sub-Zero arranty
3 BUILT-IN REFRIGERTION Built-In Refrigeration For the built-in line, Sub-Zero designers and engineers took a fresh look at everything, inside and out. Exterior refinements include redesigned grilles and lower-profile hinges. Inside, new technology in food preservation makes the builtin line nothing short of revolutionary. KEY FETURES Three distinct design approaches: overlay, flush inset and stainless steel. andle options coordinate with handles of olf cooking products. BUILT-IN MODELS Dual refrigeration; two compressors preserve food s goodness in two sealed compartments. Energy efficient. Internal dispenser model provides ice and chilled water inside the refrigerator. Crisper and deli drawers form a lower-temperature zone for produce and meats. Flip-up grille provides easy access for quick routine maintenance. ll models are Star-K certified. ICBBI-36R ICBBI-36F ICBBI-30U ICBBI-36U ICBBI-36UFD ICBBI-36S ICBBI-42S ICBBI-42SD ICBBI-48S ICBBI-48SID ICBBI-48SD BUILT-IN PRO 48 INTEGRTED INE subzero.com 3
4 BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Overall Dimensions LL REFRIGERTOR / LL FREEZER EIGT DIMENSIONS ± 13 Model ICBBI-36R and ICBBI-36F Overall dimensions are based on stainless steel models. For flush inset applications, add 13 to door clearance dimensions. OVER-ND-UNDER EIGT DIMENSIONS ± 13 Model ICBBI-30U English
5 BUILT-IN REFRIGERTION Overall Dimensions OVER-ND-UNDER 606 Model ICBBI-36U. 914 EIGT DIMENSIONS ± EIGT DIMENSIONS ± Model ICBBI-36UFD BUILT-IN PRO 48 INTEGRTED INE subzero.com 5
6 BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Overall Dimensions SIDE-BY-SIDE EIGT DIMENSIONS ± 13 Model ICBBI-36S EIGT DIMENSIONS ± 13 Model ICBBI-42S and ICBBI-42SD English
7 BUILT-IN REFRIGERTION Overall Dimensions SIDE-BY-SIDE EIGT DIMENSIONS ± Model ICBBI-48S, ICBBI-48SID and ICBBI-48SD Specifications BUILT-IN MODELS INTERIOR CPCITY LL REFRIGERTOR / LL FREEZER R (L) F (L) ICBBI-36R 613 ICBBI-36F 612 OVER-ND-UNDER R (L) F (L) ICBBI-30U ICBBI-36U ICBBI-36UFD SIDE-BY-SIDE R (L) F (L) ICBBI-36S ICBBI-42S ICBBI-42SD ICBBI-48S ICBBI-48SID ICBBI-48SD BUILT-IN PRO 48 INTEGRTED INE subzero.com 7
8 BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Opening Dimensions STNDRD INSTLLTION SIDE VIE 2127 OPENING EIGT NOTE: Shaded line represents profile of unit. OPENING IDT 610 OPENING DEPT MODEL ICBBI-36R, ICBBI-36F ICBBI-30U ICBBI-36U, ICBBI-36UFD, ICBBI-36S ICBBI-42S, ICBBI-42SD ICBBI-48S, ICBBI-48SID, ICBBI-48SD TOP VIE OPENING IDT FRONT VIE If a 2108 grille height is specified, the opening height must be decreased by 22. If a 2235 grille height is specified, the opening height must be increased by 102. If two units are installed side by side, refer to page 10 for dual standard installations. 8 English
9 BUILT-IN REFRIGERTION Opening Dimensions FLUS INSET INSTLLTION SIDE VIE FLUS INSET IDT FLUS INSET DEPT FLUS INSET EIGT MODEL ICBBI-36R, ICBBI-36F ICBBI-30U ICBBI-36U, ICBBI-36UFD, ICBBI-36S ICBBI-42S, ICBBI-42SD ICBBI-48S, ICBBI-48SID, ICBBI-48SD 32 TOP VIE FRONT VIE *76 typical depth. Shaded areas will be visible and should be finished to match cabinetry. NOTE: Shaded line represents profile of unit with19 panel FINISED CLETS* FLUS INSET IDT * TYPICL 56 Dimensions assume a 19 panel thickness. If a 2108 grille height is specified, the flush inset height must be decreased by 22. If a 2235 grille height is specified, the flush inset height must be increased by 102. If two units are installed side by side, refer to page 11 for dual flush inset installations. BUILT-IN PRO 48 INTEGRTED INE subzero.com 9
10 BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Opening Dimensions DUL STNDRD INSTLLTION SIDE VIE 2127 OPENING EIGT NOTE: Shaded line represents profile of unit. OPENING IDT 610 OPENING DEPT MODELS Two 762 Models Model and 914 Model 1670 Two 914 Models 1822 TOP VIE OPENING IDT FRONT VIE dual installation kit will be required for this installation. 10 English
11 BUILT-IN REFRIGERTION Opening Dimensions DUL FLUS INSET INSTLLTION SIDE VIE FLUS INSET DEPT FLUS INSET EIGT *76 typical depth. Shaded areas will be visible and should be finished to match cabinetry. NOTE: Shaded line represents profile of unit with19 panel. FLUS INSET IDT 32 MODELS Two 762 Models Model and 914 Model 1734 Two 914 Models 1886 TOP VIE FLUS INSET IDT FRONT VIE FINISED CLETS* * TYPICL 56 Dimensions assume a 19 panel thickness. dual installation kit will be required for this installation. BUILT-IN PRO 48 INTEGRTED INE subzero.com 11
12 BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Electrical International models from the factory designed without a transformer require a V C, 50/60 z electrical supply, fused at the correct rating for the unit. If required by local or national codes, the power cord can be easily replaced using the power inlet device. The electrical supply should be located within the shaded area shown in the illustration below. separate circuit, servicing only this appliance is required. ground fault circuit interrupter (GFCI) is not recoended and may cause interruption of operation. Installation must comply with all applicable electrical codes. ELECTRICL REQUIREMENTS Power Supply Circuit Breaker Receptacle FROM FLOOR RIGT SIDE OF OPENING E 152 Electrical supply location V C, 50/60 z 10 amp grounding-type (earthed) Plumbing For built-in models with an automatic ice maker, the water supply line should be located within the shaded area shown in the illustration below. The water supply line should be connected to the house supply with an easily accessible shut-off valve. Do not use self piercing valves. The water supply line must not interfere with installation of the anti-tip brackets. reverse osmosis system can be used provided there is constant water pressure of bar supplied to the unit at all times. copper line is not recoended for this application. Installation must comply with all applicable plumbing codes. PLUMBING REQUIREMENTS ater Supply Line 6.35 OD copper line, braided stainless steel, or PEX tubing ater Pressure bar Excess ater Line for Connection.9 m 457 RIGT SIDE OF OPENING RE EXTENDS 13 FORRD ON FLOOR ater supply location English
13 BUILT-IN REFRIGERTION Custom Panels For overlay and flush inset applications, custom door panels must be provided. andle hardware must also be provided for overlay and flush inset applications. Refer to panel requirements below and the charts on pages for custom panel dimensions for your specific design application. IMPORTNT NOTE: Do not cover a glass door with a solid panel. Finish all sides of the custom panels. They may be visible when the door is open or through the window of glass door models. PNEL REQUIREMENTS PNEL EIGT ICBBI-36R, ICBBI-36F ll Other Models Grille Panel PNEL TICKNESS ll Panels MX 34 kg 23 kg 6 kg MIN 16 Custom Panels PNEL MOUNTING KIT Sub-Zero custom panel mounting kit eliminates the need for a backer and spacer panel and is avail able through an authorized Sub-Zero dealer. The kit consists of mounting cleats, screws and gages used to properly position the cleats. The kit is available for all built-in models. Dual installations require two mounting kits. OVERLY PNELS Overlay panels are typically created by combining a 19 custom panel, a 3 spacer panel and a 6 backer panel. Refer to the illustrations below. hen installing two units side by side, refer to page 10 for dual standard installations. SPCER PNEL CUSTOM PNEL BCKER PNEL TRIM 8 min 3 (OVERLY) Panel assembly cross section (overlay). CUSTOM PNEL 19 TYPICL 3 SPCER PNEL BCKER PNEL 6 Panel assembly rear view. BUILT-IN PRO 48 INTEGRTED INE subzero.com 13
14 BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Custom Panels FLUS INSET PNELS The flush inset application is an overlay model with flush inset panels. It is not a separate model. The flush inset design allows custom panels to be installed flush with adjacent cabinets. Similar to overlay, flush inset panels are typically created by combining a 19 custom panel, a 3 spacer panel and a 6 backer panel. Refer to the illustrations for overlay panels. For flush inset panels thicker than 19, a 90 door stop may be required to prevent interference with adjacent cabinets. Refer to the full-scale templates at the end of this guide. hen installing two units side by side, refer to page 11 for dual flush inset installations. ICE ND TER DISPENSER For models ICBBI-42SD and BI 48SD, the refrigerator door panel must include a cut-out to accoodate the external dispenser. The thickness of the panel in this area can range from 6 to a maximum of 29. Refer to the illustrations below Dispenser dimensions. 2 3 RDIUS andle placement. NDLE GLSSELL 14 English
15 BUILT-IN REFRIGERTION Overlay Panel Dimensions MODEL ICBBI-36R, ICBBI-36F ICBBI-36R / ICBBI-36F ICBBI-30U / ICBBI-36U ICBBI-36UFD REFRIGERTOR / FREEZER Overlay Panel Spacer Panel Backer Panel GRILLE Overlay Panel * Spacer Panel Backer Panel MODEL ICBBI-30U REFRIGERTOR Overlay Panel Spacer Panel Backer Panel FREEZER Overlay Panel Spacer Panel Backer Panel GRILLE Overlay Panel * Spacer Panel Backer Panel MODEL ICBBI-36U REFRIGERTOR Overlay Panel Spacer Panel Backer Panel FREEZER Overlay Panel Spacer Panel Backer Panel GRILLE Overlay Panel * Spacer Panel Backer Panel MODEL ICBBI-36UFD REFRIGERTOR (2 PNELS) Overlay Panels Spacer Panels Backer Panels FREEZER Overlay Panel Spacer Panel Backer Panel GRILLE Overlay Panel * Spacer Panel Backer Panel BUILT-IN PRO 48 INTEGRTED INE subzero.com 15
16 BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Overlay Panel Dimensions ICBBI-36S / ICBBI-42S ICBBI-48S / ICBBI-48SID B ICBBI-42SD / ICBBI-48SD MODEL ICBBI-36S REFRIGERTOR Overlay Panel Spacer Panel Backer Panel FREEZER Overlay Panel Spacer Panel Backer Panel GRILLE Overlay Panel * Spacer Panel Backer Panel MODEL ICBBI-42S, ICBBI-42SD REFRIGERTOR Overlay Panel Spacer Panel Backer Panel FREEZER Overlay Panel Spacer Panel Backer Panel GRILLE Overlay Panel * Spacer Panel Backer Panel ICBBI-42SD Dispenser Cut-Out B Cut-Out Location MODEL ICBBI-48S, ICBBI-48SID, ICBBI-48SD REFRIGERTOR Overlay Panel Spacer Panel Backer Panel FREEZER Overlay Panel Spacer Panel Backer Panel GRILLE Overlay Panel * Spacer Panel Backer Panel ICBBI-48SD Dispenser Cut-Out B Cut-Out Location *Panel height may be increased by 11 to hide upper main frame. Grille panel dimensions are for standard 2134 overall unit height. For 2108 height, subtract 25 from grille panel height dimensions and for 2235 height, add 102. specific panel grille must be ordered for a 2108 or 2235 overall unit height. 16 English
17 BUILT-IN REFRIGERTION Flush Inset Panel Dimensions MODEL ICBBI-36R, ICBBI-36F ICBBI-36R / ICBBI-36F ICBBI-30U / ICBBI-36U ICBBI-36UFD REFRIGERTOR / FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel Spacer Panel Backer Panel MODEL ICBBI-30U REFRIGERTOR Flush Inset Panel Spacer Panel Backer Panel FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel Spacer Panel Backer Panel MODEL ICBBI-36U REFRIGERTOR Flush Inset Panel Spacer Panel Backer Panel FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel Spacer Panel Backer Panel MODEL ICBBI-36UFD REFRIGERTOR (2 PNELS) Flush Inset Panels Spacer Panels Backer Panels FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel Spacer Panel Backer Panel BUILT-IN PRO 48 INTEGRTED INE subzero.com 17
18 BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Flush Inset Panel Dimensions ICBBI-36S / ICBBI-42S ICBBI-48S / ICBBI-48SID MODEL ICBBI-36S REFRIGERTOR Flush Inset Panel Spacer Panel Backer Panel FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel Spacer Panel Backer Panel MODEL ICBBI-42S, ICBBI-42SD REFRIGERTOR Flush Inset Panel Spacer Panel Backer Panel FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel Spacer Panel Backer Panel DISPENSER (ICBBI-42SD) Dispenser Cut-Out B Cut-Out Location ICBBI-42SD / ICBBI-48SD B MODEL ICBBI-48S, ICBBI-48SID, ICBBI-48SD REFRIGERTOR Flush Inset Panel Spacer Panel Backer Panel FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel Spacer Panel Backer Panel DISPENSER (ICBBI-48SD) Cut-Out B Cut-Out Location Grille panel dimensions are for standard 2134 overall unit height. For 2108 height, subtract 25 from grille panel height dimensions and for 2235 height, add 102. specific panel grille must be ordered for a 2108 or 2235 overall unit height. 18 English
19 BUILT-IN REFRIGERTION Flush Inset Panels PNEL OFFSETS The illustrations provide panel offsets and reveals for built-in models in a flush inset application. Refer to the chart below for reference to the illustrations. PNEL OFFSET LL REFRIGERTOR / LL FREEZER Door / Grille Sides Grille Top Grille Bottom / Door Top Door Bottom OVER-ND-UNDER Door / Drawer / Grille Sides Grille Top Grille Bottom / Door Top Door Bottom / Drawer Top Drawer Bottom SIDE-BY-SIDE Doors (hinge) / Grille Sides Doors (handle) Sides Grille Top Grille Bottom / Door Top Door Bottom ILLUS C D F ILLUS C D E F ILLUS B C D F TOP VIE DOOR / DRER / GRILLE BCKER SPCER FLUS INSET PNEL Illus. Illus. C 8 CBINETRY GRILLE DOOR DRER Illus. E CBINETRY SIDE VIE SIDE VIE 16 DOOR 8 3 Illus. B Illus. D GRILLE DOOR Illus. F DOOR / DRER TOP VIE SIDE VIE DOOR 6 REVEL SIDE VIE BUILT-IN PRO 48 INTEGRTED INE subzero.com 19
20 BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Dual Installation If two units are installed side by side, a dual installation kit may be required. Installations without a custom filler strip require a dual installation kit. If a dual installation kit is not specified, a 51 filler strip is recoended between units. custom filler strip is required when installing two French door or side-by-side models. Dual installations without a filler strip can only be accomplished using two units with opposite hinges. Refer to the illustrations below. Dual installation kits are available through an authorized Sub-Zero dealer. For questions regarding the installation, contact your authorized Sub-Zero dealer. ITOUT FILLER STRIP Opposite hinges. FILLER STRIP Same side hinges. For dual standard installations, panel dimensions are the same as for single installations. Refer to the charts on pages Panel dimensions and offsets for dual flush inset installations are listed on the following pages. 20 English
21 BUILT-IN REFRIGERTION Dual Flush Inset Panel Dimensions ICBBI-36R / ICBBI-36F MODEL ICBBI-36R, ICBBI-36F REFRIGERTOR / FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel Spacer Panel Backer Panel MODEL ICBBI-30U REFRIGERTOR Flush Inset Panel Spacer Panel Backer Panel FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel Spacer Panel Backer Panel ICBBI-30U / ICBBI-36U MODEL ICBBI-36U REFRIGERTOR Flush Inset Panel Spacer Panel Backer Panel FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel Spacer Panel Backer Panel Grille panel dimensions are for standard 2134 overall unit height. For 2108 height, subtract 25 from grille panel height dimensions and for 2235 height, add 102. specific panel grille must be ordered for a 2108 or 2235 overall unit height. For dual wide grilles, refer to page 23. BUILT-IN PRO 48 INTEGRTED INE subzero.com 21
22 BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Dual Installation DUL FLUS INSET PNEL OFFSETS The illustrations provide panel offsets and reveals for built-in models in a dual flush inset application. Refer to the chart below for reference to the illustrations. PNEL OFFSET LL REFRIGERTOR / LL FREEZER Door (hinge) / Grille Sides Door (handle) Sides Grille Top Grille Bottom / Door Top Door Bottom OVER-ND-UNDER Door (hinge) / Drawer / Grille Sides Door (handle) Sides Grille Top Grille Bottom / Door Top Door Bottom / Drawer Top Drawer Bottom ILLUS B C D F ILLUS B C D E F TOP VIE DOOR / DRER / GRILLE BCKER SPCER FLUS INSET PNEL Illus. Illus. C 8 CBINETRY GRILLE DOOR DRER Illus. E CBINETRY SIDE VIE SIDE VIE 16 DOOR 8 3 Illus. B Illus. D Illus. F GRILLE DOOR DOOR / DRER TOP VIE DUL TRIM SIDE VIE 6 REVEL SIDE VIE 8 DOOR English
23 BUILT-IN REFRIGERTION Dual Installation DUL IDE GRILLE dual wide grille spans the entire width of both units in a dual installation and is a part of a dual installation kit. For overlay and flush inset panel dimensions for the dual wide grille, refer to the charts below. Dimensions listed are for a standard 2134 finished height. DUL IDE GRILLE OVERLY TO 762 MODELS Overlay Panel Spacer Panel Backer Panel MODEL ND 914 MODEL Overlay Panel Spacer Panel Backer Panel TO 914 MODELS Overlay Panel Spacer Panel Backer Panel DUL IDE GRILLE FLUS INSET TO 762 MODELS Flush Inset Panel Spacer Panel Backer Panel MODEL ND 914 MODEL Flush Inset Panel Spacer Panel Backer Panel TO 914 MODELS Flush Inset Panel Spacer Panel Backer Panel BUILT-IN PRO 48 INTEGRTED INE subzero.com 23
24 BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Side Panel The custom side panels must be a minimum of 610 deep and 13 thick. Routing will be necessary for the side panel to fit flush against the side of the unit. Refer to the illustrations below. hen installing a built-in unit with a custom side panel, an accessory kit is required. Stainless steel and white enamel side panels are available through an authorized Sub-Zero dealer. 610 ROUT TO ROUT TO 5 (OVER-ND-UNDER MODELS) OPTIONL TOE KICK CUT-OUT 102 Side panel dimensions. FRONT OF SIDE PNEL MIN FRME Routing detail. 48 SIDE PNEL ROUTING Standard andles Optional stainless steel tubular and pro handles are available through an authorized Sub-Zero dealer. Refer to the chart below for standard handle lengths for built-in models. NDLE LENGT BUILT-IN TUBULR PRO Full Door Over-and-Under Door Drawer Drawer Drawer English
25 BUILT-IN REFRIGERTION Overlay and Flush Inset Panels FULL-SCLE TEMPLTE Overlay and flush inset panels must be a minimum of 16 thick to support mounting the handle. Panel thickness does not include backer and spacer panel. Mount handle close to the opening edge of the door. 25 Overlay and flush inset panel thickness. 6 BCKER PNEL DOOR 51 DEPT OF TUBULR ND PRO NDLES PNEL 25 PNEL 19 PNEL 3 SPCER PNEL BUILT-IN PRO 48 INTEGRTED INE subzero.com 25
26 BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Overlay pplication FULL-SCLE TEMPLTE TO RER OF UNIT 25 TICK PNEL 19 TICK OVERLY PNEL (TYPICL) 6 BCKER PNEL OVERLL IDT OF UNIT 0 SCLE door opening (top view). 26 English
27 BUILT-IN REFRIGERTION Flush Inset pplication FULL-SCLE TEMPLTE For panels thicker than 19, a 90 door stop may be required to prevent interference with adjacent cabinets. 25 TICK PNEL 19 TICK FLUS INSET PNEL (TYPICL) 6 BCKER PNEL 610 TO BCK LL 56 SSUMES 19 FLUS INSET PNEL TICKNESS 32 0 SCLE 25 BUILT-IN PRO 48 INTEGRTED INE 110 door opening (top view). subzero.com 27
28 BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN PPROX PROFILE OF STINLESS STEEL RPPED DOOR ND NDLE Dual Standard Installation FULL-SCLE TEMPLTE Typical overlay or stainless steel dual installation with filler strip at maximum 110 door opening. Panel thickness may require a 90 door stop. 0 SCLE 25 FILLER STRIP 32 DOOR CLOSED DOOR OPEN 110 Dual standard installation (top view). 28 English
29 BUILT-IN REFRIGERTION PROFILE OF 19 FLUS INSET PNEL ND TUBULR NDLE Dual Flush Inset Installation FULL-SCLE TEMPLTE Typical flush inset dual installation with filler strip at maximum 110 door opening. Panel thickness may require a 90 door stop. 0 SCLE 25 FILLER STRIP DOOR CLOSED DOOR OPEN 110 BUILT-IN PRO 48 INTEGRTED INE Dual flush inset installation (top view). subzero.com 29
30 PRO 48 REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN PRO 48 Refrigeration Freshness finds unmistakable expression in the Sub-Zero PRO kg monument to food preservation equal parts sculpted metal design statement and culinary secret weapon. Its vast interior, like its bold exterior, is crafted of stainless steel. The PRO 48 is available with or without a glass door and may be either built in or freestanding. PRO 48 MODELS ICB648PRO ICB648PROG KEY FETURES Can be used freestanding or installed as a standard or flush built-in application. Stainless steel interior as well as exterior. andles coordinate with handles of olf ranges. Dual refrigeration system enhanced with triple evaporators allow independent control of storage conditions in refrigerator cabinet and drawer compartments. Slide-out stainless steel bins fit neatly under refrigerator glass shelves. Exterior temperature display. Flip-up grille provides easy access for quick routine maintenance. Star-K certified. 30 English
31 PRO 48 REFRIGERTION Overall Dimensions PRO 48 MODELS 1219 EIGT DIMENSIONS ± Models ICB648PRO and ICB648PROG SPECIFICTIONS INTERIOR CPCITY R (L) F (L) ICB648PRO, ICB648PROG BUILT-IN PRO 48 INTEGRTED INE subzero.com 31
32 PRO 48 REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Opening Dimensions STNDRD ND FLUS INSTLLTION SIDE VIE OPENING EIGT TOP VIE OPENING IDT FRONT VIE OPENING DIMENSIONS INSTLLTION D Standard Flush D OPENING DEPT For standard built-in installations, the face frame of the unit will extend 51 beyond cabinetry. For flush installations, the front of the face frame will be flush with surrounding cabinetry. 32 English
33 PRO 48 REFRIGERTION Electrical International models from the factory designed without a transformer require a V C, 50/60 z electrical supply, fused at the correct rating for the unit. If required by local or national codes, the power cord can be easily replaced using the power inlet device. The electrical supply should be located within the shaded area shown in the illustration below. separate circuit, servicing only this appliance is required. ground fault circuit interrupter (GFCI) is not recoended and may cause interruption of operation. Installation must comply with all applicable electrical codes. ELECTRICL REQUIREMENTS Power Supply Circuit Breaker Receptacle FROM FLOOR RIGT SIDE OF OPENING E 152 Electrical supply location V C, 50/60 z 1 amp grounding-type (earthed) Plumbing The water supply line should be located within the shaded area shown in the illustration below. The water supply line should be connected to the house supply with an easily accessible shut-off valve. Do not use self piercing valves. The water supply line must not interfere with installation of the anti-tip bracket. reverse osmosis system can be used provided there is constant water pressure of bar supplied to the unit at all times. copper line is not recoended for this application. Installation must comply with all applicable plumbing codes. PLUMBING REQUIREMENTS ater Supply 6.35 OD copper line, braided stainless steel, or PEX tubing ater Pressure bar Excess ater Line for Connection.9 m 76 RIGT SIDE OF OPENING RE EXTENDS 13 FORRD ON FLOOR ater supply location. BUILT-IN PRO 48 INTEGRTED INE subzero.com 33
34 PRO 48 REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Standard andles Refer to the chart below for standard handle lengths for PRO 48 models. NDLE LENGT PRO 48 TUBULR PRO Door N 703 Refrigerator Drawer N 506 Freezer Drawer N English
35 INTEGRTED REFRIGERTION Integrated Refrigeration ith custom front panels and hardware, Sub-Zero invented integrated columns, tall and drawer models that disappear into the decor. Integrated units fit flush with other cabinets, making integrated refrigeration as practical and beautiful in the master suite, bar or theatre room as in the kitchen. INTEGRTED MODELS ICBIC-18FI ICBID-30RP ICBID-30CI ICBIC-24R ICBIC-24FI ICBID-36CI ICBIC-30RID ICBIC-30FI KEY FETURES Custom front panels and hardware allow for infinite design options. Point-of-use refrigeration that can be placed anywhere in the home. Dual refrigeration; two compressors preserve food s goodness in self-contained compartments. Energy efficient. ll models rated + or higher. Star-K certified. ICBIC-36RID ICBIT-30RID ICBIT-30CIID ICBIT-36CIID BUILT-IN PRO 48 INTEGRTED INE subzero.com 35
36 INTEGRTED REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Specifications INTERIOR CPCITY COLUMN R (L) F (L) ICBIC-18FI 230 ICBIC-24R 352 ICBIC-24FI 338 ICBIC-30RID 475 ICBIC-30FI 415 ICBIC-36RID 590 TLL R (L) F (L) ICBIT-30RID 397 ICBIT-30CIID ICBIT-36CIID DRER R (L) F (L) ICBID-30RP 138 ICBID-30CI ICBID-36CI IMPORTNT NOTE: Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness. Overall Dimensions COLUMN 2134 * *2121 MIN TO 2146 MX COLUMN B MODEL B ICBIC-18FI ICBIC-24R, ICBIC-24FI ICBIC-30RID, ICBIC-30FI ICBIC-36RID English
37 INTEGRTED REFRIGERTION Overall Dimensions TLL 2134 * 467 TLL *2121 MIN TO 2146 MX B MODEL B ICBIT-30RID, ICBIT-30CIID ICBIT-36CIID DRER * 268 DRER *864 MIN TO 889 MX MODEL ICBID-30RP, ICBID-30CI ICBID-36CI BUILT-IN PRO 48 INTEGRTED INE subzero.com 37
38 INTEGRTED REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Opening Dimensions INTEGRTED MODELS SIDE VIE OPENING EIGT 635 OPENING DEPT OPENING IDT NOTE: 89 finished returns will be visible and should be finished to match cabinetry. 89 FINISED RETURN 19 TYPICL FRMELESS CBINETRY 89 FINISED RETURN TOP VIE FRONT VIE FILLER FRMED CBINETRY OPENING DIMENSIONS COLUMN ICBIC-18FI ICBIC-24R, ICBIC-24FI ICBIC-30RID, ICBIC-30FI ICBIC-36RID TLL ICBIT-30RID, ICBIT-30CIID ICBIT-36CIID DRER ICBID-30RP, ICBID-30CI ICBID-36CI The depth of each integrated model is 610. llow for panel thickness when planning the finished opening depth. minimum 89 finished return is required on all sides of the opening. Framed cabinets will require additional finished filler material behind the face frame for a proper installation. Refer to the illustration. DUL INSTLLTION hen installing two units side by side in a dual installation, the opening width is the width of the two units added together. dual installation kit will be required for this installation. If a dual installation kit is not specified, a minimum 51 filler strip is required between units. Dual installation kits are available through an authorized Sub-Zero dealer. For questions regarding the installation, contact your authorized Sub-Zero dealer. 38 English
39 INTEGRTED REFRIGERTION Electrical The electrical supply must be located within the shaded area shown in the illustration and chart below. separate circuit, servicing only this appliance is required. ground fault circuit interrupter (GFCI) is not recoended and may cause interruption of operation. Installation must comply with all applicable electrical codes. ELECTRICL REQUIREMENTS Power Supply Circuit Breaker Receptacle V C, 50/60 z 10 amp grounding-type (earthed) ELECTRICL SUPPLY LOCTION IDT 457 Model Model Model Model LEFT SIDE OF OPENING E FLOOR Electrical supply location. 108 Plumbing The water supply line should be located within the shaded area shown in the illustration below. The water supply line should be connected to the house supply with an easily accessible shut-off valve. Do not use self piercing valves. The water supply line must not interfere with installation of the anti-tip bracket. reverse osmosis system can be used provided there is constant water pressure of bar supplied to the unit at all times. copper line is not recoended for this application. Installation must comply with all applicable plumbing codes. PLUMBING REQUIREMENTS ater Supply Line 6.35 OD copper line, braided stainless steel, or PEX tubing ater Pressure bar Excess ater Line for Connection.9 m TER SUPPLY LOCTION IDT 457 Model Model Model Model RIGT SIDE OF OPENING 152 RE EXTENDS 13 FORRD ON FLOOR ater supply location. BUILT-IN PRO 48 INTEGRTED INE subzero.com 39
40 INTEGRTED REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Custom Panels For integrated models, custom door panels and handle hardware must be provided. Refer to the panel requirements chart and typical panel dimensions. The thickness of the custom panel can vary. minimum 16 thick panel is required, but the thickness can be increased provided it does not exceed the weight limit. The depth of each integrated model is 610. llow for panel thickness when planning the finished opening depth. Refer to the full-scale template on page 43. CUTION s reveals between cabinetry and the unit decrease, severe finger pinching can occur while door is closing. Finish all sides of custom panels. They will be visible when the door/drawer is open. D-style handles are recoended. Door handles must be located near the edge of the panel opposite the hinge and should be centered top to bottom. Drawer handles must be located near the top edge of each panel. Stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. PNEL REQUIREMENTS COLUMN MX EIGT 457 Model 20 kg 610 Model 27 kg 762 / 914 Model 34 kg TLL (DOOR) MX EIGT 762 Model 22 kg 914 Model 27 kg DRER Drawer Panel PNEL TICKNESS ll Panels MX EIGT 7 kg MINIMUM 16 TYPICL PNEL DIMENSIONS 2029 Typical panel dimensions are based on a 2134 finished height for column and tall models and 876 for drawer models, with a 102 toe kick and 3 reveals. Panel dimensions must be adjusted accordingly for all other installations. Refer to the illustration for panel heights and the chart below for panel widths. PNEL IDT MODEL 457 Model Model Model Model 908 DUL INSTLLTION For dual installations, refer to the illustration for panel heights and the chart below for panel widths Column Tall Drawer PNEL IDT MODEL 457 Model Model Model Model English
41 INTEGRTED REFRIGERTION Custom Panels DOOR PNEL EIGT The height of the custom door panel can extend beyond the typical panel height, provided it does not exceed the weight limit. Refer to the illustration below DOOR PNEL INGE Upper valance (column and tall) side view. DECORTIVE VLNCE CNNOT EXTEND BEYOND TIS PLNE 610 TO BCK OF UNIT TOE KICK CLERNCE The height of the toe kick area can extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below. Toe kick heights from 51 to 98 require a reduced toe kick accessory available through an authorized Sub-Zero dealer. 51 * TO 152 FROM FLOOR INGE DOOR PNEL *51 to 98 requires sales accessory. Toe kick side view. VENTED LOUVERS 610 TO BCK OF UNIT 29 MX TOE KICK DJUSTMENT DECORTIVE TOE KICK CNNOT EXTEND BEYOND TIS PLNE BUILT-IN PRO 48 INTEGRTED INE subzero.com 41
42 INTEGRTED REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Standard andles Optional stainless steel tubular and pro handles are available through an authorized Sub-Zero dealer. Refer to the chart below for standard handle lengths for integrated models. NDLE LENGT INTEGRTED TUBULR PRO Column Door Tall Door Drawer Drawer English
43 INTEGRTED REFRIGERTION 0 POTENTIL INTERFERENCE DJCENT CBINETRY SCLE 3 REVEL PNEL POTENTIL INTERFERENCE DOOR OPEN MXIMUM 105 Maximum Door Opening FULL-SCLE TEMPLTE s the panel width and/or depth increases, so does the potential for panel interference. Interference may be minimized by utilizing the 90 door stop. DOOR CLOSED 19 PNEL BUILT-IN PRO 48 INTEGRTED INE Maximum door opening (top view). subzero.com 43
44 INE STORGE INE INTEGRTED PRO 48 BUILT-IN ine Storage ine finds a well-deserved place of honor in a Sub-Zero wine storage unit. Every detail is designed to ensure better wine preservation. Cherrywood-faced racks, soft lighting, custom cabinetry if desired Sub-Zero helps make a wine collection an element of beauty in the home. INE STORGE MODELS ICB424G ICB424FSG KEY FETURES Integrated, overlay, flush inset and stainless steel design options. Full-view glass door standard on all models. Discreet interior lighting with illuminated display rack for prized bottles of wine. Two independent storage zones maintain temperature, humidity and UV protection. Full extension, cherrywood-faced wine racks for easy access. ine racks accoodate 750 ml bottles, half-bottles and magnums. Inventory system helps organize wine collection. Freestanding model ICB424FSG does not require panels or surrounding cabinetry. Model ICBI-30R features two refrigerator storage drawers. ICBI-18 ICBI-24 ICBI-30 ICBI-30R ICBS English
45 INE STORGE Overall Dimensions MODEL ICB424G SPECIFICTIONS STORGE CPCITY BOTTLES (750 ML) ICB424G 46 ICB424FSG 46 MODEL ICB424FSG Freestanding model ICB424FSG has a finished stainless steel exterior and handles. Overall dimensions are based on the stainless steel model. Refer to page 65 for door clearance information. BUILT-IN PRO 48 INTEGRTED INE subzero.com 45
46 INE STORGE INE INTEGRTED PRO 48 BUILT-IN Opening Dimensions MODEL ICB424G SIDE VIE OPENING IDT MODEL ICB424G 876 OPENING EIGT 610 OPENING DEPT TOP VIE OPENING IDT FRONT VIE English
47 INE STORGE Overall Dimensions COLUMN 2134 * *2121 MIN TO 2146 MX COLUMN B MODEL B ICBI ICBI ICBI TLL 2134 * 451 TLL *2121 MIN TO 2146 MX B MODEL B ICBI-30R IMPORTNT NOTE: Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness. BUILT-IN PRO 48 INTEGRTED INE subzero.com 47
48 INE STORGE INE INTEGRTED PRO 48 BUILT-IN Specifications INTERIOR CPCITY COLUMN BOTTLES (750 ML) ICBI ICBI ICBI TLL R (L) BOTTLES (750 ML) ICBI-30R English
49 INE STORGE Opening Dimensions INTEGRTED INE STORGE SIDE VIE OPENING EIGT 635 OPENING DEPT OPENING IDT NOTE: 89 finished returns will be visible and should be finished to match cabinetry. 89 FINISED RETURN 19 TYPICL FRMELESS CBINETRY 89 FINISED RETURN TOP VIE FRONT VIE FILLER FRMED CBINETRY OPENING DIMENSIONS COLUMN ICBI ICBI ICBI TLL ICBI-30R The depth of each integrated (ICBI) model is 610. llow for panel thickness when planning the finished opening depth. minimum 89 finished return is required on all sides of the opening. Framed cabinets will require additional finished filler material behind the face frame for a proper installation. Refer to the illustration. DUL INSTLLTION The unit can be installed next to an integrated refrigeration model or another integrated wine storage model in a dual installation. hen installing two units side by side, the opening width is the width of the two units added together. dual installation kit will be required for this installation. If a dual installation kit is not specified, a minimum 51 filler strip is required between units. Dual installation kits are available through an authorized Sub-Zero dealer. For questions regarding the installation, contact your authorized Sub-Zero dealer. BUILT-IN PRO 48 INTEGRTED INE subzero.com 49
50 INE STORGE INE INTEGRTED PRO 48 BUILT-IN Overall Dimensions MODEL ICBS EIGT DIMENSIONS ± SPECIFICTIONS STORGE CPCITY BOTTLES (750 ML) ICBS Overall dimensions are based on the stainless steel model. For flush inset applications, add 13 to door clearance dimensions. Opening Dimensions MODEL ICBS-30 STNDRD INSTLLTION SIDE VIE OPENING IDT MODEL ICBS OPENING EIGT 610 OPENING DEPT NOTE: Shaded line represents profile of unit. TOP VIE OPENING IDT FRONT VIE 749 If a 2108 grille height is specified, the opening height must be decreased by 22. If a 2235 grille height is specified, the opening height must be increased by 102. If two units are installed side by side, refer to page 52 for dual standard installations. 50 English
51 INE STORGE Opening Dimensions MODEL ICBS-30 FLUS INSET INSTLLTION SIDE VIE FLUS INSET IDT MODEL ICBS FLUS INSET DEPT FLUS INSET EIGT 32 TOP VIE FRONT VIE FINISED CLETS* FLUS INSET IDT *76 typical depth. Shaded areas will be visible and should be finished to match cabinetry. NOTE: Shaded line represents profile of unit with 19 panel * TYPICL 56 Dimensions assume a 19 panel thickness. If a 2108 grille height is specified, the flush inset height must be decreased by 22. If a 2235 grille height is specified, the flush inset height must be increased by 102. If two units are installed side by side, refer to page 53 for dual flush inset installations. BUILT-IN PRO 48 INTEGRTED INE subzero.com 51
52 INE STORGE INE INTEGRTED PRO 48 BUILT-IN Opening Dimensions MODEL ICBS-30 DUL STNDRD INSTLLTION SIDE VIE 2127 OPENING EIGT NOTE: Shaded line represents profile of unit. OPENING IDT MODELS ICBS-30 and 762 Built-In ICBS-30 and 914 Built-In 610 OPENING DEPT TOP VIE OPENING IDT FRONT VIE dual installation kit will be required for this installation. 52 English
53 INE STORGE Opening Dimensions MODEL ICBS-30 DUL FLUS INSET INSTLLTION SIDE VIE FLUS INSET DEPT FLUS INSET EIGT *76 typical depth. Shaded areas will be visible and should be finished to match cabinetry. NOTE: Shaded line represents profile of unit with19 panel. FLUS INSET IDT MODELS ICBS-30 and 762 Built-In ICBS-30 and 914 Built-In 32 TOP VIE FLUS INSET IDT FRONT VIE FINISED CLETS* * TYPICL 56 Dimensions assume a 19 panel thickness. dual installation kit will be required for this installation. BUILT-IN PRO 48 INTEGRTED INE subzero.com 53
54 INE STORGE INE INTEGRTED PRO 48 BUILT-IN Electrical The electrical supply must be located within the shaded area shown in the illustration for your specific model. For integrated (ICBI) models, also refer to the chart. separate circuit, servicing only this appliance is required. ground fault circuit interrupter (GFCI) is not recoended and may cause interruption of operation. If the unit will be connected to a home security system, allow 914 of excess wiring for proper connection. Installation must comply with all applicable electrical codes. ELECTRICL REQUIREMENTS Power Supply Circuit Breaker Receptacle 51 LEFT SIDE OF OPENING 394 E FLOOR Model ICB424G V C, 50/60 z 10 amp grounding-type (earthed) FROM FLOOR RIGT SIDE OF OPENING Model ICBS-30. E 152 ELECTRICL SUPPLY LOCTION MODEL ICBI-18 ICBI-24 ICBI-30, ICBI 30R LEFT SIDE OF OPENING E FLOOR 108 Integrated (ICBI) models English
55 INE STORGE Custom Panels For overlay, integrated and flush inset applications, custom door panels must be provided. andle hardware must also be provided for overlay, integrated and flush inset applications. Refer to panel requirements and custom panel dimensions charts for your specific model and design application. Do not install a solid panel on a glass door unit. solid door is available as a sales accessory (except model ICBS-30) and must be installed if a solid panel is being specified. Service may be required to install the door. Contact an authorized Sub-Zero dealer for more information. Overall dimensions are the same for glass and solid door panels. Finish all sides of the custom panels. They may be visible when the door is open or through the window of glass door models. Model ICB424FSG has a finished stainless steel exterior that is designed to be used in a freestanding application. Custom Panels ICB424G For model ICB424G, the custom door panel will attach directly to the door frame with screws through a series of pre-drilled holes. Refer to the charts for panel requirements and dimensions. PNEL REQUIREMENTS PNEL EIGT ICB424G PNEL TICKNESS ICB424G OVERLY PNEL DIMENSIONS ICB424G MX 5 kg MIN 16 PNEL DIMENSIONS MODEL ICB424G STILES / RILS (MIN) ICB424G DOOR CLERNCE 57 Model ICB424G can be installed flush with surrounding cabinetry. Depending on the thickness of the overlay door panel, it may be necessary to install the unit 6 beyond the front surface of adjacent cabinetry to prevent interference when the door is opened to 145. Refer to the fullscale template on page 65. BUILT-IN PRO 48 INTEGRTED INE subzero.com 55
56 INE STORGE INE INTEGRTED PRO 48 BUILT-IN Custom Panels Integrated Models For integrated (ICBI) models, custom door panels and handle hardware must be provided. Refer to the panel requirements chart and typical panel dimensions. Do not install a solid panel on the glass door unit. solid door is available as a sales accessory through an authorized Sub-Zero dealer. The thickness of the custom panel can vary. minimum 16 thick panel is required, but the thickness can be increased provided it does not exceed the weight limit. The depth of each integrated model is 610. llow for panel thickness when planning the finished opening depth. Refer to the full-scale template on page 43. CUTION s reveals between cabinetry and the unit decrease, severe finger pinching can occur while door is closing. Finish all sides of custom panels. They will be visible when the door/drawer is open. D-style handles are recoended. Door handles must be located near the edge of the panel opposite the hinge and should be centered top to bottom. Drawer handles must be located near the top edge of each panel. Stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. PNEL REQUIREMENTS STILES / RILS Stiles Top Rail Bottom Rail Bottom Rail (ICBI-30R) PNEL EIGT Door Frame Door Frame (ICBI-30R) Drawer Panel PNEL TICKNESS ll Panels IDT MX 16 kg 11 kg 7 kg MIN 16 TYPICL PNEL DIMENSIONS Column 2029 Tall Typical panel dimensions are based on a 2134 finished height, 102 toe kick and 3 reveals. Panel dimensions must be adjusted accordingly for all other installations. Refer to the illustration for panel heights and the chart below for panel widths. PNEL IDT MODEL ICBI-18 ICBI-24 ICBI-30, ICBI-30R DUL INSTLLTION For dual installations, refer to the illustration for panel heights and the chart below for panel widths. PNEL IDT MODEL ICBI-18 ICBI-24 ICBI-30, ICBI-30R English
57 INE STORGE Custom Panels Integrated Models DOOR PNEL EIGT The height of the custom door panel can extend beyond the typical panel height, provided it does not exceed the weight limit. Refer to the illustration below DOOR PNEL INGE Upper valance side view. DECORTIVE VLNCE CNNOT EXTEND BEYOND TIS PLNE 610 TO BCK OF UNIT TOE KICK CLERNCE The height of the toe kick area can extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below. Toe kick heights from 51 to 98 require a reduced toe kick accessory available through an authorized Sub-Zero dealer. For questions regarding the installation, contact your authorized Sub-Zero dealer. 51 * TO 152 FROM FLOOR INGE DOOR PNEL *51 to 98 requires sales accessory. Toe kick side view. VENTED LOUVERS 610 TO BCK OF UNIT 29 MX TOE KICK DJUSTMENT DECORTIVE TOE KICK CNNOT EXTEND BEYOND TIS PLNE BUILT-IN PRO 48 INTEGRTED INE subzero.com 57
58 INE STORGE INE INTEGRTED PRO 48 BUILT-IN Custom Panels ICBS-30 OVERLY PNELS Overlay panels are typically created by combining a 19 custom panel, a 3 spacer panel and a 6 backer panel. Refer to the illustrations below. PNEL REQUIREMENTS PNEL EIGT Door Grille PNEL TICKNESS Overlay SPCER PNEL CUSTOM PNEL BCKER PNEL TRIM DOOR FRME 8 min 3 GLSS Panel assembly cross section (overlay). CUSTOM PNEL 19 TYPICL 3 MX 34 kg 6 kg MIN 16 SPCER PNEL BCKER PNEL 6 Panel assembly rear view. OVERLY PNEL DIMENSIONS ICBS-30 OVERLY PNELS DOOR Overlay Panel Spacer Panel Backer Panel STILES / RILS Minimum 83 GRILLE Overlay Panel * Spacer Panel Backer Panel *Panel height may be increased by 11 to hide upper main frame. Grille panel dimensions are for standard 2134 overall unit height. For 2108 height, subtract 25 from grille panel height dimensions and for 2235 height, add 102. specific panel grille must be ordered for a 2108 or 2235 overall unit height. 58 English
59 INE STORGE Custom Panels ICBS-30 FLUS INSET PNELS The flush inset application is an overlay model with flush inset panels. It is not a separate model. The flush inset design allows custom panels to be installed flush with adjacent cabinets. Similar to overlay, flush inset panels are typically created by combining a 19 custom panel, a 3 spacer panel and a 6 backer panel. Refer to the illustrations for overlay panels on the previous page. For flush inset panels thicker than 19, a 90 door stop may be required to prevent interference with adjacent cabinets. Refer to the full-scale template on page 68. PNEL REQUIREMENTS PNEL EIGT Door Grille PNEL TICKNESS Flush Inset MX 34 kg 6 kg MIN 16 FLUS INSET PNEL DIMENSIONS ICBS-30 FLUS INSET PNELS DOOR Flush Inset Panel Spacer Panel Backer Panel STILES / RILS Minimum 95 GRILLE Flush Inset Panel Spacer Panel Backer Panel Grille panel dimensions are for standard 2134 overall unit height. For 2108 height, subtract 25 from grille panel height dimensions and for 2235 height, add 102. specific panel grille must be ordered for a 2108 or 2235 overall unit height. BUILT-IN PRO 48 INTEGRTED INE subzero.com 59
60 INE STORGE INE INTEGRTED PRO 48 BUILT-IN Custom Panels ICBS-30 FLUS INSET PNEL OFFSETS The illustrations provide panel offsets and reveals for model ICBS-30 in a flush inset application. Refer to the chart below for reference to the illustrations. PNEL OFFSET FLUS INSET Door / Grille Sides Grille Top Grille Bottom / Door Top Door Bottom ILLUS B C D TOP VIE DOOR / DRER / GRILLE BCKER SPCER FLUS INSET PNEL Illus. Illus. C GRILLE DOOR 8 CBINETRY SIDE VIE 13 Illus. B Illus. D CBINETRY GRILLE DOOR / DRER SIDE VIE SIDE VIE English
61 INE STORGE Custom Panels ICBS-30 DUL INSTLLTIONS If two models ICBS-30 or a model ICBS-30 and built-in unit are installed side by side, a dual installation kit may be required. Installations without a custom filler strip require a dual installation kit. If a dual installation kit is not specified, a 51 filler strip is recoended between units. Dual installations without a filler strip can only be accomplished using two units with opposite hinges. Refer to the illustrations below. Dual installation kits are available through an authorized Sub-Zero dealer. For questions regarding the installation, contact your authorized Sub-Zero dealer. For dual standard installations, panel dimensions are the same as for single installations. Panel dimensions and offsets for dual flush inset installations are listed on the following pages. ITOUT FILLER STRIP Opposite hinges. FILLER STRIP Same side hinges. DUL FLUS INSET PNEL DIMENSIONS ICBS-30 MODEL ICBS-30 DOOR Flush Inset Panel Spacer Panel Backer Panel STILES / RILS Minimum 95 GRILLE Flush Inset Panel Spacer Panel Backer Panel Grille panel dimensions are for standard 2134 overall unit height. For 2108 height, subtract 25 from grille panel height dimensions and for 2235 height, add 102. specific panel grille must be ordered for a 2108 or 2235 overall unit height. BUILT-IN PRO 48 INTEGRTED INE subzero.com 61
62 INE STORGE INE INTEGRTED PRO 48 BUILT-IN Custom Panels ICBS-30 DUL FLUS INSET PNEL OFFSETS The illustrations provide panel offsets and reveals for model ICBS-30 in a dual flush inset application. Refer to the chart below for reference to the illustrations. PNEL OFFSET DUL FLUS INSET Door (hinge) / Grille Sides Door (handle) Sides Grille Top Grille Bottom / Door Top Door Bottom ILLUS B C D E TOP VIE DOOR / DRER / GRILLE BCKER SPCER FLUS INSET PNEL Illus. Illus. C Illus. E 8 CBINETRY GRILLE DOOR / DRER SIDE VIE CBINETRY SIDE VIE 8 2 DOOR 8 3 Illus. B Illus. D GRILLE DOOR TOP VIE DUL TRIM 6 REVEL SIDE VIE DOOR English
D E S I G N G U I D E ICB REVISED 10 / 2018
DESIGN GUIDE ICB REVISED 10 / 2018 T B L E O F C O N T E N T S 3 B U I L T- I N R E F R I G E R T I O N 30 P R O 4 8 R E F R I G E R T I O N 35 I N T E G R T E D R E F R I G E R T I O N 44 INE STORGE 72
More informationFeatures and specifications are subject to change at any time without notice. Throughout this guide, dimensions may vary by ± 3 mm.
DESIGN GUIDE ICB REVISED 1 / 2017 T B L E O F C O N T E N T S 3 B U I L T- I N R E F R I G E R T I O N 30 P R O 4 8 R E F R I G E R T I O N 35 I N T E G R T E D R E F R I G E R T I O N 44 INE STORGE 72
More informationD E S I G N G U I D E REVISED 9 / 2017
DESIGN GUIDE REVISED 9 / 2017 T B L E O F C O N T E N T S 3 B U I L T- I N R E F R I G E R T I O N 40 P R O 4 8 R E F R I G E R T I O N 46 I N T E G R T E D R E F R I G E R T I O N 56 INE STORGE 88 U N
More informationSub-Zero Design Guide
Sub-Zero Design Guide REVISED 8 / 2015 Contents 3 Built-In Refrigeration 38 PRO 48 Refrigeration 44 Integrated Refrigeration 54 ine Storage 84 Undercounter Refrigeration Features and specifications are
More informationDESIGN GUIDE WINE STORAGE
DESIGN GUIDE INE STORGE EFFECTIVE 1/4/2017 T B L E O F C O N T E N T S 3 INE STORGE 33 SUB-ZERO RRNTIES Features and specifications are subject to change at any time without notice. Throughout this guide,
More informationIMPORTANT NOTE: Throughout this guide, dimensions may vary by ± 1 /8" (3).
SUB-ZERO DESIGN GUIDE Contents Built-In Refrigeration.......................... 3 PRO 48 Refrigeration......................... 44 Integrated Refrigeration...................... 50 Wine Storage...............................
More informationWine Storage Design Guide
ine Storage Design Guide Contents 3 ine Storage 4 Specifications 12 Custom Panels 24 Full-Scale Templates 32 arranty Features and specifications are subject to change at any time without notice. Visit
More informationBuilt-In Refrigeration Design Guide
uilt-in Refrigeration Design Guide Contents 3 uilt-in Refrigeration 4 Design Options 6 Specifications 15 Custom Panels 30 Full-Scale Templates Features and specifications are subject to change at any time
More informationDispenser Specifications 22 Side Panels 23 Dual Installations 24 Accessories 31 Full-Scale Templates 32
UILT-IN DESIGN GUIDE Contents uilt-in Design Options 4 Model Specifications 6 Planning Information 9 Overlay Panels 12 Flush Inset Panels 26 Dispenser Specifications 22 Side Panels 23 Dual Installations
More informationBUILT-IN DESIGN GUIDE
UILT-IN DESIGN GUIDE Contents uilt-in Design Options 4 Model Specifications 6 Planning Information 9 Framed Panels 12 Overlay Panels 18 Flush Inset Panels 22 Dispenser Specifications 28 Side Panels 29
More informationJust six inches bigger than the Model 661, the Model
Side-by-Side Refrigerator / Freezer Front venting allows unit to be completely built in Hermetically sealed refrigeration units Serial and model number plate Lighted electronic control panel Adjustable
More informationIf you like the strong vertical lines of side-by-side
Side-by-Side Refrigerator Freezer Front venting allows unit to be completely built in Hermetically sealed refrigeration units Serial and model number plate Lighted electronic control panel Adjustable wire
More informationThis is the smallest combination refrigerator / freezer
Over-and-Under Refrigerator / Freezer Front venting allows unit to be completely built in Hermetically sealed refrigeration units Lighted electronic control panel Serial and model number plate Adjustable
More informationUndercounter Refrigeration Design Guide
Undercounter Refrigeration Design Guide Contents 3 Undercounter Refrigeration 4 Specifications 6 Custom Panels 9 Full-Scale Template 10 Warranties Features and specifications are subject to change at any
More informationUndercounter Refrigeration Design Guide
Undercounter Refrigeration Design Guide Contents 3 Undercounter Refrigeration 4 Specifications 6 Custom Panels 9 Full-Scale Template 10 Warranties Features and specifications are subject to change at any
More informationSKSCR2401P 24-INCH INTEGRATED COLUMN REFRIGERATOR
Style Door Style Interior Cabinet Finish Panel Ready Metal Innovation Wi-Fi-Enabled for SmartThinQ Control with iphone / Android App Inverter Linear Compressor Performance Speed Chill Modes Sabbath, Demo,
More informationSKSCR3001P 30-INCH INTEGRATED COLUMN REFRIGERATOR
Style Door Style Interior Cabinet Finish Panel Ready Metal Innovation WiFi-Enabled for SmartThinQ Control with iphone / Android App Inverter Linear Compressor Performance Speed Chill Modes Sabbath, Demo,
More informationC O N T E N T S. Built-In Refrigeration 4. Integrated Refrigeration 31. Wine Storage 50. Undercounter Refrigeration 67.
SUB-ZERO DESIGN GUIDE C O N T E N T S Built-In Refrigeration 4 Integrated Refrigeration 31 Wine Storage 50 Undercounter Refrigeration 67 Warranty 77 Features and specifications indicated herein and on
More informationSKSCF3001P 30-INCH INTEGRATED COLUMN FREEZER
Style Door Style Interior Cabinet Finish Panel Ready Metal Innovation Wi-Fi-Enabled for SmartThinQ Control with iphone / Android App Inverter Linear Compressor LARGEST CAPACITY COLUMN Designed to provide
More informationSKSCF1801P 18-INCH INTEGRATED COLUMN FREEZER
Style Door Style Interior Cabinet Finish Panel Ready Metal Innovation WiFi-Enabled for SmartThinQ Control with iphone / Android App Inverter Linear Compressor LARGEST CAPACITY COLUMN Designed to provide
More informationBASIC SPECIFICATIONS AND DIMENSIONS - DESIGNER MODELS
BSIC SPECIFICTIONS ND DIMENSIONS - DESIGNER MODELS 30 W. MODELS DESCRIPTION DDFB304 DDRB304 Overall Width Overall Height from Bottom 30 (76.2 cm) Min. 82 3/4 (210.2 cm) to Max. 84 1/16 (213.5 cm) Overall
More informationZIR36ND GE Monogram 36" Built-In All-Refrigerator
Product Dimensions (in inches) 73-1/2" 10-3/4" Max. 10" Min. 24-3/4" 26-3/4" 3 Case 36" Overall 84-1/2" Max. 83-1/2" Min. Design Information Designed to be installed flush or semi-flush with surrounding
More informationMONOGRAM 36" BUILT-IN SIDE-BY-SIDE REFRIGERATOR
STION 1 STNR 1/4" RM PNLS 3/4" OVRLY PNLS STION 2 LUSH INST OVRLL IMNSIONS STNR 25 1/2" (64.8) 36" (91.5) 23 7/8" (60.7) 1 3/4" (4.4) 13 1/2" (34.3) *84" (213.4) *83 1/2" (212.1) 68 1/2" (174.0) *72 1/4"
More informationFully Integrated 36 Bottom Mount. KF 1913 Vi / KF 1903 Vi
Fully Integrated 36 Bottom Mount 8mieleusa.com SPECIFICATIONS Features: MasterCool controls ClearView lighting system Drop and Lock Shelves SmartFresh storage drawers FullView storage drawers Ice maker
More informationMONOGRAM 42" BUILT-IN SIDE-BY-SIDE REFRIGERATOR
MONOGRM 42" UILT-IN SI-Y-SI RRIGRTOR STION 1 STNR INSTLLTION 1/4" RM PNLS 3/4" OVRLY PNLS STION 2 LUSH INST INSTLLTION MONOGRM 42" UILT-IN SI-Y-SI RRIGRTOR STNR INSTLLTION 25 1/2" (64.8) 42" (106.7) 23
More informationMONOGRAM 36" BUILT-IN BOTTOM-FREEZER REFRIGERATOR
OVERALL DIMENSIONS 25 3/4" (65.4) 36" (91.5) 23 7/8" (60.7) 9 3/4" (24.8) 2 3/4" (7.0) *73 1/4" (186.1) 30 1/2" (77.5) *84" (213.4) *8 (212.1) SPECIFICATIONS Overall Width Overall Height Overall Depth
More informationMonogram 36" Built-In Side-by-Side Refrigerator
Monogram 36" uilt-in Side-by-Side Refrigerator STION 1 LUSH INST INSTLLTION STION 2 STNR INSTLLTION 1/4" RM PNLS 3/4" OVRLY PNLS OVRLL IMNSIONS TR PNL INSTLL LUSH INST INSTLLTION 38" (96.5) 26" (66.0)
More informationFully Integrated 18 Freezer with In-door Dispenser. F 1473 Vi
Fully Integrated 18 Freezer with In-door Dispenser 8mieleusa.com Specification Sheets TRS 01092018 SPECIFICATIONS Features: MasterCool controls ClearView lighting system Drop and Lock Shelves SmartFresh
More informationFully Integrated 30 Freezer. F 1813 Vi / F 1803 Vi
Fully Integrated 30 Freezer 8mieleusa.com Specification Sheets TRS 06022017 SPECIFICATIONS Features: MasterCool controls ClearView lighting system Drop and Lock Shelves SmartFresh storage drawers FullView
More informationPROFESSIONAL FULL SIZE BUILT-IN PREMIUM REFRIGERATION Price Book Version 2 - Effective April 1, American Made. for over 120 Years
Tel: (800) 966-8300 Fax: (800) 966-8304 wwweasternmarketingcom 2017 Price Book Version 2 - Effective April 1, 2017 PROFESSIONAL FULL SIZE BUILT-IN American Made PREMIUM REFRIGERATION for over 120 Years
More informationMONOGRAM 36" BUILT-IN BOTTOM-FREEZER REFRIGERATOR
OVERALL DIMENSIONS 36" (91.5) 25 3/4" (65.4) 23 7/8" (60.7) 9 3/4" (24.8) 2 3/4" (7.0) *84" (213.4) 30 1/2" (77.5) *73 1/4" (186.1) *8 (212.1) *34 3/4" (88.3) SPECIFICATIONS *26" (66.0) *23" (58.4) Overall
More informationFully Integrated 18 Freezer with Internal Ice Maker. F 1413 Vi
Fully Integrated 18 Freezer with Internal Ice Maker 8mieleusa.com Specification Sheets TRS 01092018 SPECIFICATIONS Features: MasterCool controls ClearView lighting system Drop and Lock Shelves SmartFresh
More informationFully Integrated 36 Freezer. F 1913 Vi / F 1903 Vi
Fully Integrated 36 Freezer 8mieleusa.com Specification Sheets TRS 01092018 SPECIFICATIONS Features: MasterCool controls ClearView lighting system Drop and Lock Shelves SmartFresh storage drawers FullView
More informationTwo conveniently located deli drawers with full-extension precision ball-bearing
Standard Features & Accessories All models include Total capacity 20.4 cu. ft. (579 L) o Refrigerator - 15.3 cu. ft. o Freezer - 5.1 cu. ft. o 84 H./D. ProChill Temperature Management System o Variable-speed
More informationTwo deli drawers Two moisture adjustable see-through produce drawers with precision ballbearing
Standard Features & Accessories All models include Capacity 22.8 cu. ft. (645.2 L) o 84 H./D. ProChill Temperature Management System o Variable-speed single compressor system o Electronic controls maintain
More informationREFRIGERATION. Standard Features & Accessories. Model Options. Quiet Cool Built-In 48 W. Side-By-Side
Standard Features & Accessories All models include Total capacity 27.4 cu. ft. (776 L) o Refrigerator - 18.5 cu. ft. o Freezer - 8.9 cu. ft. o 84 H./D. ProChill Temperature Management System o Variable-speed
More informationGE Monogram 48" Built-In Side-by-Side Refrigerator
OVRLL IMNSIONS 25 1/2" (64.8) 48" (121.9) 23 7/8" (60.7) 1 3/4" (4.4) 13 1/2" (34.3) *84" (213.4) *83 1/2" (212.1) 68 1/2" (174.0) *72 1/4" (183.5) *40" (101.6) SPIITIONS Overall Width Overall Height Overall
More informationMONOGRAM 36" BUILT-IN BOTTOM-FREEZER REFRIGERATOR
OVERALL DIMENSIONS 25 3/4" (65.4) 36" (91.5) 23 7/8" (60.7) 9 3/4" (24.8) 2" (5.1) *73 1/4" (186.1) 44 1/2" (113.0) *84" (213.4) *8 (212.1) *28" (71.1) *26" (66.0) SPECIFICATIONS Overall Width Overall
More informationGE Monogram 36" Built-In Bottom-Freezer Refrigerator
OVERALL DIMENSIONS 25 3/4" (65.4) 36" (91.5) 23 7/8" (60.7) 9 3/4" (24.8) 2" (5.1) *73 1/4" (186.1) 44 1/2" (113.0) *84" (213.4) *8 (212.1) *28" (71.1) *26" (66.0) SPECIFICATIONS Overall Width Overall
More informationREFRIGERATION. Standard Features & Accessories. Model Options. Quiet Cool Built-In 36 W. All Refrigerator
Standard Features & Accessories REFRIGERATION All models include Capacity 22.8 cu. ft. (645.2 L) o 84 H./D. ProChill Temperature Management System o Variable-speed DC Overdrive Compressor is one of the
More informationFully Integrated 30 Bottom Mount. KF 1813 Vi / KF 1803 Vi
Fully Integrated 30 Bottom Mount 8mieleusa.com SPECIFICATIONS Features: MasterCool controls ClearView lighting system Drop and Lock Shelves SmartFresh storage drawers FullView storage drawers Ice maker
More informationMONOGRAM 42" BUILT-IN SIDE-BY-SIDE REFRIGERATOR
MONOGRM 42" UILT-IN SI-Y-SI RRIGRTOR STION 1 STNR INSTLLTION 1/4" RM PNLS 3/4" OVRLY PNLS STION 2 LUSH INST INSTLLTION STNR INSTLLTION 25 1/2" (64.8) 42" (106.7) 23 7/8" (60.7) 1 3/4" (4.4) 13 1/2" (34.3)
More informationFour adjustable tempered glass spillproof shelves Two deli drawers with precision ballbearing
Standard Features & Accessories All models include Capacity 18.2 cu. ft. (515.1 L) o 84 H./D. ProChill Temperature Management System o Variable-speed single compressor system includes the quietest, most
More informationMONOGRAM 36" BUILT-IN SIDE-BY-SIDE REFRIGERATOR
MONOGRM 36" UILT-IN SI-Y-SI RRIGRTOR STION 1 STNR INSTLLTION 1/4" RM PNLS 3/4" OVRLY PNLS STION 2 LUSH INST INSTLLTION MONOGRM 36" UILT-IN SI-Y-SI RRIGRTOR OVRLL IMNSIONS STNR INSTLLTION 25 1/2" (64.8)
More informationDDFB304 Designer. components have a durable protective coating for maintenance-free normal use.
Standard Features & Accessories All models include Capacity 15.9 cu. ft. (450.0 L) o 84 H./D. ProChill Temperature Management System o Variable-speed single compressor system includes the quietest, most
More informationClear glass doors o Stainless Steel (SS) stainless steel
Standard Features & Accessories REFRIGERATION All models include Electronic controls with digital temperature readout o Inside temperature can be adjusted from 44 68ºF o Factory set at 55ºF o Sabbath mode
More informationREFRIGERATION. Standard Features & Accessories. Model Options. Quiet Cool Built-In 36 W. All Freezer
Standard Features & Accessories REFRIGERATION All models include Capacity 19.2 cu. ft. (544 L) o 84 H./D. ProChill Temperature Management System o Variable-speed DC Overdrive Compressor is one of the quietest,
More informationREFRIGERATION. Standard Features & Accessories. Model Options. Quiet Cool Built-In 36 W. All Refrigerator
Standard Features & Accessories REFRIGERATION All models include Capacity 22.8 cu. ft. (645.2 L) o 84 H./D. ProChill Temperature Management System o Variable-speed DC Overdrive Compressor is one of the
More informationViking Installation Guide
Viking Installation Guide Viking Range Corporation 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-VIKING1 (845-4641) or visit the Viking Web site at
More informationFully Integrated 30 Refrigerator. K 1813 Vi / K 1803 Vi
Fully Integrated 30 Refrigerator 8mieleusa.com Specification Sheets TRS 01092018 SPECIFICATIONS K 1803 Vi Item 36180301USA - Right Hinged Features: MasterCool controls ClearView lighting system Drop and
More informationWall Cabinets 42'' High
Wall Cabinets 42'' High 42 W0942 1 167 W1242 2 169 W1542 3 180 W1842 4 189 W2142 5 202 W2442 6 219 W2742 7 243 W3042 8 267 42 W3342 9 285 W3642 10 303 Wall Cabinets 36'' High W0936 11 129 W1236 12 133
More informationREFRIGERATION. Standard Features & Accessories. Model Options. Built-In 42 W. Side-By-Side Refrigerator/Freezer
Standard Features & Accessories All models include Total capacity 24.0 cu. ft. (679.7 L) o 84 H./D. ProChill Temperature Management System o Variable-speed, single compressor system includes the quietest,
More informationEI28BS56IB0 EI28BS56IS0 EI28BS56IW0
Product No. B0 S0 W0 Series Mainline Mainline Mainline Color black stainless white Volts 1 1 1 Wiring Diagram 241955901 241955901 241955901 Market North America North America North America Energy Guide
More informationExam Room Group (shown) 8010 (reversed) W: 43", 46", 49" H : Wall: 30", Desk: 30" D : Wall: 14.25", Desk: 24.25" Cabinet group consists of:
Exam Room Group Exam Room Group 8008 W: 29" - 50" (3" increments) H : Wall: 8", Desk: 30" D : Wall: 13.25", Desk: 24.25" #3020 wall mounted book shelf (27" - 48" W) #1500-4.5" knee space drawer (27" -
More informationREFRIGERATION. Standard Features & Accessories. Model Options. Quiet Cool Built-In 30 W. All Freezer
Standard Features & Accessories REFRIGERATION All models include Capacity 15.9 cu. ft. (450.0 L) o 84 H./D. ProChill Temperature Management System o Variable-speed DC Overdrive Compressor is one of the
More informationVCSF136DSS01 : CABINET [1/13]
VCSFDSS0 : 00 - CABINET [/] Page of VCSFDSS0 : 00 - CABINET [/] Page of Ref # Part Number Qty. Description 5 7 8 9 0 5 7 8 9 0 5 7 8 9 0 NI NON-SERVICEABLE 059-000 057-000 07-000 0575-000 08-000 08-000
More information24-INCH RENAISSANCE WINE CELLAR, LEFT-HINGE SINGLE ZONE PANEL-READY
GENERL PROPERTIES 24-INH RENISSNE WINE ELLR, LEFT-HINGE SINGLE ZONE PNEL-REDY PNEL REDY DOOR SWING DEODORIZING FILTER LEFT RNF241WL HERITGE OLLETION LIGHTING FULL WIDTH SHELVES LED LIGHTS 4 E SHELF MTERIL
More informationBI Series Parts Manual
subzero.com 00..70 BI Series Parts Manual BI-SID Part Lists & Exploded Views Built-In (BI) Series (SWS #00000) 7007 Door, Ref -S S Svce 7000 Door, Ref -F/O S Svce NOTE: Door Assemblies do NOT incl. hinges
More informationSome models are supplied with a protective film on steel and aluminium parts. This film must be removed before installing/using the appliance.
ELECTRIC RNGE for residential use only R Models: VEFSEE 304 P.. INSTLLTION INSTRUCTIONS IMPORTNT - PLESE RED ND FOLLOW Before beginning, please read these instructions completely and carefully. Do not
More informationEuropean Inspiration. v Plywood CONSTRUCTION
European Inspiration v Plywood CONSTRUCTION PRICING & SPECIFICATIONS 04 3 Designer Finishes YOUR CHOICE Ash Ivory Walnut European Inspiration v Plywood CONSTRUCTION D O O R S T Y L E S Geneva MAPLE Palermo
More informationFully Integrated 36 Bottom Mount
Fully Integrated 36 Bottom Mount miele.ca SPECIFICATIONS Features: MasterCool controls ClearView lighting system Drop and Lock Shelves SmartFresh storage drawers FullView storage drawers Ice maker RemoteVision
More informationTOP CONFIGURATIONS Gas Ranges R366 R364C R364G
WOLF AS RANS WOLF AS RANS If it looks as if it could be in a restaurant kitchen, well, that s natural. That s precisely where Wolf has spent the past seven decades, perfecting the form, function and sheer
More informationMODEL mm Hinges Included. MODEL 1432 Hinges Purchased Separately Anti-Rak Cable System Flipper Door Slide Up to 75 lb.
1 pplications: Vertically mounted concealed doors for office/residential storage cabinets, entertainment centers, and armoires. Use model 1332/1432 with unique nti-rak cable system to eliminate door sag
More informationMARINE SERIES MARINE CAPABLE MODELS MARINE SERIES MODELS
Marine MARINE SERIES Marine Series At a Glance 5 14 Marine Crescent Ice Maker (BI95FC) 6 14 Marine Crescent Ice Maker (WH95FC) 8 14 Marine Crescent Ice Maker (SS1095) 10 15 Marine Crescent Ice Maker (SS98NF)
More informationInstallation Manual HP15 HP24 HP48 HC24 HA24 HH24
Installation Manual HP15 HP24 HP48 HC24 HA24 HH24 15 SIGNATURE SERIES 24 SIGNATURE SERIES 48 SIGNATURE SERIES C-SERIES ADA-COMPLIANT SERIES 18 SHALLOW-DEPTH SERIES Form No. Z2348 Rev. 04.01.2014 TABLE
More informationInstallation Manual HP15 HP24 HP48 HC24 HA24 HH24
Installation Manual HP15 HP24 HP48 HC24 HA24 HH24 15 SIGNATURE SERIES 24 SIGNATURE SERIES 48 SIGNATURE SERIES C-SERIES ADA-COMPLIANT SERIES 18 SHALLOW-DEPTH SERIES Form No. Z2348 Rev. 04.01.2014 TABLE
More informationAstro Single Section Homes
2017 Astro Single Section Homes Table of Contents 14 Wide Models 16 Wide Models Pg. Model Size Sq. Ft. 3 4A133A 1444 587 3 4A127A 1452 693 3 4A105A 1456 747 4 4A111A 1460 800 4 4A118A 1460 800 4 4A128A
More informationViking Installation Guide
Viking Installation Guide Viking Range Corporation 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-VIKING1 (845-4641) or visit the Viking Web site at
More informationFully Integrated 24 Wine Storage System. KWT 1613 Vi / KWT 1603 Vi
Fully Integrated 24 Wine Storage System 8mieleusa.com SPECIFICATIONS Features: MasterCool controls ClearView lighting system 14 Rack Levels Stores up to 102 bottles FullView extendable shelves RemoteVision
More informationRefrigeration. Models Shown: AFD2535FES (Refrigerator) And AES5730BA (Range With Aftermarket Backsplash)
Refrigeration Models Shown: AFD2535FES (Refrigerator) And AES5730BA (Range With Aftermarket Backsplash) s i d e - b y- s i d e R E F R I G E R ATO R S NoN-Water dispensing A S D 2 6 2 0 H R A S D 2 6 2
More informationWOLF DUAL FUEL RANGES
Dual Fuel Ranges With Wolf s dual fuel ranges you have state-ofthe-art cooking expertise in any number of sizes to meet the discriminating consumers precise needs. Patented features ensure this range stands
More informationInstallation Instructions
Installation Instructions Over The Range Microwave Oven BEFORE YOU BEGIN (Read these instructions completely and carefully.) IMPORTANT IMPORTANT Save these instructions for local inspector s use. Observe
More informationREFRIGERATION. Standard Features & Accessories. Model Options. All models include. FGIM515/FPIM515 Professional Door Panel (PIDP15)
Standard Features & Accessories REFRIGERATION All models include Produces up 65 lbs. of clear ice per day 26 lb. capacity ice bin 1 x 1-1/8 x 1-1/4 cube size LED light LED control panel o Power On/Off
More informationCB29M. Multi Position 60 HZ A I R H A N D L E R S. 3 to 5 Tons Optional Electric Heat 5 to 30 kw CB 29 M 41 1 E N G I N E E R I N G D A T A
E N G I N E E R I N G D T I R H N D L E R S CB29M Multi Position 60 HZ Bulletin No. 210478 November 2008 Supersedes July 2007 3 to 5 Tons Optional Electric Heat 5 to 30 kw MODEL NUMBER IDENTIFICTION CB
More informationMODEL mm Hinges Included. MODEL 1432 Hinges Purchased Separately Anti-Rak Cable System Flipper Door Slide Up to 75 lb.
MODEL 1332 35 mm Hinges Included MODEL 1432 Hinges Purchased Separately nti-rak System Flipper Slide Up to 75 lb. [34 kg] apacity pplications: Vertically mounted concealed doors for office/residential
More informationProdigy Eclipse ECC, EH330 and EH430 C or D Service Parts
This part list contains the service parts for the Eclipse 00, 00, and 800 systems. D series models began early 0 The models that are covered include: EH0 C & D EH0 C & D ECC00 ECC00 ECC800 Contents Head
More informationQuiet Cool Built-In 30 /36 W. All Refrigerator/All Freezer FDRB5301/5361, FDFB5301/5361 FDRB5301 FDRB5361 FDFB5301 FDFB5361 FDRB/FDFB5361
Quiet Cool Built-In 30 /36 W. All Refrigerator/All Freezer FDRB5301/5361, FDFB5301/5361 CUSTOM PANEL DIMENSIONS FDRB5301 FDRB5361 FDFB5301 FDFB5361 (1.9 cm) 29-1/4 (74.3 cm) (1.9 cm) 35-1/4 (89.5 cm) 75-
More information1000 SERIES SURFACE MOUNTED CLOSERS
1000 SERIES SURFCE MOUNTED CLOSERS PPLICTIONS n For aluminum, hollow metal, or wood swinging doors and frames. n Can be used with hinge or pivot mounted door. n Mounts on 1-3/ transom without adapter plates.
More informationBI Series Parts Manual
subzero.com 800.222.7820 BI Series Parts Manual BI-R 23 Part Lists & Exploded Views Built-In (BI) Series (SWS #40000) BI-R DOOR, GRILLE, TRIM VIEW 4 Sales Acc. Metal Front Panel Clips () Kit 47 Threaded
More informationIntroduction Date: October 2007 Pt No INSTRUCTION KIT JOINER RF 1 KIT COMPONENTS
KIT COMPONENTS Part Illustration Rear Bracket Description Front Lower Bracket KIT APPLICATION This kit is designed for use on 1595mm / 62 & 1695mm / 66 high cabinet models, incorporating the B, C, D &
More informationCURVED CC5 CC5 RF6 CC5 RF9 CC5 RF12 CC5 RF15 CC5 HT6 CC5 HT9 CC5 HT12. Page 1. Download C.A.D models or contact us on COSSIGA.COM
CURVED CC5 RF CC5 RF6 CC5 RF9 CC5 RF12 CC5 RF15 Deck forced refrigeration Sliding doors front and rear Double glazed Two adjustable shelves Ticket strips on shelves and deck Undershelf and canopy LED lights
More informationCoolers and freezers
and freezers Staycold has manufactured innovative, high quality products from its South African factory since 1979. The engineering integrity and technical excellence of the Staycold brand has created
More informationInspection Points - Motor Homes
Inspection Points - Motor Homes We at RVIS, LLC appreciate your business and look forward to providing you with the professional RV inspection you deserve. So that we may provide you with a thorough inspection,
More informationStorage. Worksurfaces & Support See page Statement of Line. Mobile
Table of Contents Worksurfaces & Support Statement of Line 1 3 16" Worksurfaces page 328 1 9 16" Worksurfaces page 329 Transaction Counters page 330 Table Tops page 331 Support page 332 Planning Product
More informationCURVED CC5 CC5 RF6 CC5 RF9 CC5 RF12 CC5 RF15 CC5 HT6 CC5 HT9 CC5 HT12. Page 1. Download C.A.D models or contact us on COSSIGA.COM
CURVED CC5 RF CC5 RF6 CC5 RF9 CC5 RF12 CC5 RF15 Deck forced refrigeration Sliding doors front and rear Double glazed Two adjustable shelves Ticket strips on shelves and deck Undershelf and canopy LED lights
More informationAll the Right Spaces Construction Specifications
ll the Right Spaces Construction Specifications ll units are crafted out of ¾ plywood sides, top and bottom ¾ X 1 ¾ solid wood side face frames and ¾ X 3 ¼ solid wood face frames top and bottom and ¼ plywood
More informationTHERMOPLASTIC DOORS AND COMPONENTS. Custom program
THERMOPLASTIC DOORS AND COMPONENTS Custom program CARACTÉRISTIQUES STANDARDS Dos en mélamine blanche Façades de tiroir Shaker fabriquées avec battants réguliers (sauf si battants réduits, spécifiés) Le
More informationCURVED CD5 REFRIGERATED
CURVED CD5 REFRIGERATED RF CD5 RF9 CD5 RF12 CD5 RF15 Deck forced refrigeration Sliding Doors front and rear Double glazed Argon filled rear doors Three adjustable shelves Ticket strips on shelves and deck
More informationInstallation Instructions
Installation Instructions Speedcook Oven Read carefully. Keep these Instructions. INSTALLATION INSTRUCTIONS Electrical Requirements Product rating is 240/208 volts AC, 60 Hertz, 30 amps and 6.5 kilowatts.
More informationTall & Pantry Accessories
Tall & Pantry Accessories Organizing your pantry is easier than ever with Rev-A-Shelf s innovative line of accessories. Whether you prefer the beautiful look of wood, the luxurious style of chrome, or
More informationP RO W ALL V ENTILATION H OODS INSTALLATION INSTRUCTIONS
P RO W ALL V ENTILATION H OODS INSTALLATION INSTRUCTIONS CONTACT INFORMATION Wolf Customer Service: 800-332-9513 Website: wolfappliance.com As you follow these instructions, you will notice WARNING and
More informationIMPACT CABINET & DOOR SYSTEM
IMPACT CABINET & DOOR SYSTEM 2018 www.hafele.com.au 1 IMPACT DOOR CARCASE SYSTEM / 07.17 OVERVIEW FLEXIBILITY, DOORS + PANELS IMPACT carcases can be used in more than one design, allowing for greater design
More informationAVENTOS HS Up and over lift system
AVENTOS HS Up and over lift system Perfecting motion AVENTOS HS Table of contents Overview Page 2-4 Features 5-6 Using this catalog 7 Blum, Inc. is a leading manufacturer of functional hardware for the
More informationCABINET LINER AND DOOR PARTS For Models: KUIS18NNTW0, KUIS18NNTT0, KUIS18NNTB0, KUIS18NNTS0 (White) (Biscuit) (Black) (Stainless Steel)
CABINET LINER AND DOOR PARTS ICE CUBE MAKER 5 09 Litho In U.S.A. (rrm) (psw) 1 Part No. Rev.A CABINET LINER AND DOOR PARTS 1 Literature Parts 2313820 Use & Care Guide 2324311 Service & Wiring Sheet 2 3400886
More informationMaximize Payload Performance Lightweight and Thermally Efficient
Maximize Payload Performance Lightweight and Thermally Efficient BEVERAGE FROZEN FOOD HOME DELIVERY ICE CREAM MEAT AND SEAFOOD PHARMACEUTICAL RETAIL GROCERY VENDING LIGHTWEIGHT & DURABLE ERGONOMIC & FUNCTIONAL
More informationTOWER BTG CHILLED AND HEATED
TOWER BTG CHILLED AND HEATED RF BTG RF6 BTG RF9 BTG RF12 BTG RF15 BTG RF18 Heated double glazed glass top, sides and front Heated rear sub frame Argon filled rear doors Sliding rear doors Deck forced refrigeration
More informationTOWER BTG CHILLED AND HEATED
TOWER BTG CHILLED AND HEATED RF BTG RF6 BTG RF9 BTG RF12 BTG RF15 BTG RF18 Heated double glazed glass top, sides and front Heated rear sub frame Argon filled rear doors Sliding rear doors Deck forced refrigeration
More informationINSTALLATION AND OPERATING INSTRUCTIONS
INSTALLATION AND OPERATING INSTRUCTIONS MANUAL TRANSFER SWITCHES FROM 0 Residential Wattage Requirements Appliance Running Watts Add watts for starting Furnace blower, gas or fuel 1/8 hp 300 500 1/8 hp
More informationVTC Series Video Telepresence Cart
96-01183 / rev 1b / 6-18-13 VTC Series Video Telepresence Cart ECEPTIONL SUPPORT & PROTECTION EI/TI Compliant Versatile Videoconferencing and Presentation cart designed to accommodate large displays and
More informationOutdoor Enclosure Power System ENC X100MP48F20
Outdoor Enclosure Power System ENC673034-1X100MP48F20 Manual MA015152A1 Issue 1 Oct 2010 Copyright 2010 Myers Power Products, Inc. Part# A015152A1 MA015152A1 Iss1 Page 1 of 22 Dimensions Outdoor Enclosure
More information