BASIC SPECIFICATIONS AND DIMENSIONS - DESIGNER MODELS

Transcription

1 BSIC SPECIFICTIONS ND DIMENSIONS - DESIGNER MODELS 30 W. MODELS DESCRIPTION DDFB304 DDRB304 Overall Width Overall Height from Bottom 30 (76.2 cm) Min. 82 3/4 (210.2 cm) to Max. 84 1/16 (213.5 cm) Overall Depth from Rear To rear edge of side trim 23 13/16 (60.5 cm) To front of top grille 24 (61.0 cm) To end of handle bracket 26 (66.0 cm) Cutout Width Cutout Height Cutout Depth Electrical Requirements Maximum mp Usage 30 (76.2 cm) 82 7/8 (210.5 cm) min.; 84 1/16 (213.5 cm) max. 24 (61.0 cm) min. 115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with grounded 3-prong plug attached to product. 9.9 amps Inlet Water 1/4 copper tubing inlet N/ Requirements waterline; minimum 20 psi; maximum 120 psi Overall Interior Dimensions Total Capacity 15.9 cu. ft. (450 liters) 18.2 cu. ft. (516 liters) pproximate Shipping Weight 425 lbs. (193.2 kg) 36 W. MODELS DESCRIPTION DDFB364 DDRB364 Overall Width Overall Height from Bottom 36 (91.5 cm) Min. 82 3/4 (210.2 cm) to Max. 84 1/16 (213.5 cm) Overall Depth from Rear To rear edge of side trim 23 13/16 (60.5 cm) To front of top grille 24 (61.0 cm) To end of handle bracket 26 (66.0 cm) Cutout Width Cutout Height Cutout Depth Electrical Requirements Maximum mp Usage 36 (91.5 cm) 82 7/8 (210.5 cm) min.; 84 1/16 (213.5 cm) max. 24 (61.0 cm) min. 115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with grounded 3-prong plug attached to product. 9.9 amps Inlet Water 1/4 copper tubing inlet N/ Requirements waterline; minimum 20 psi; maximum 120 psi Overall Interior Dimensions Total Capacity 19.1 cu. ft. (541 liters) 22.8 cu. ft. (646 liters) pproximate Shipping Weight 500 lbs. (227.3 kg) 4

2 BSIC SPECIFICTIONS ND DIMENSIONS - DESIGNER MODELS DUL INSTLLTION* DESCRIPTION (2) 30 Units (1) 36 & (1) 30 Unit (2) 36 Units Overall Width 60 (152.4 cm) 66 (167.6 cm) 72 (182.9 cm) Overall Height from Bottom Min. 82 3/4 (210.2 cm) to Max. 84 1/16 (213.5 cm) Overall Depth from Rear To rear edge of side trim 23 13/16 (60.5 cm) To front of top grille 24 (61.0 cm) To end of handle bracket 26 (66.0 cm) Cutout Width 60 (152.4 cm) 66 (167.6 cm) 72 (182.9 cm) Cutout Height Cutout Depth Electrical Requirements Maximum mp Usage Inlet Water Requirements (ll Freezer Only) 82 7/8 (210.5 cm) min.; 84 1/16 (213.5 cm) max. 24 (61.0 cm) min. (2) 115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with grounded 3-prong plug attached to product. 9.9 amps per unit 1/4 copper tubing inlet waterline; minimum 20 psi; maximum 120 psi Overall Interior Dimensions Total Capacity 30 Freezer 15.9 cu. ft. (450 liters) 30 Refrigerator 18.2 cu. ft. (516 liters) Total Capacity 36 Freezer 19.1 cu. ft. (541 liters) 36 Refrigerator 22.8 cu. ft. (646 liters) pproximate Shipping Weight 30 Freezer or Refrigerator 425 lbs. (193.2 kg) 36 Freezer or Refrigerator 500 lbs. (227.3 kg) *Requires separate grille kit accessory 5

3 BSIC SPECIFICTIONS ND DIMENSIONS - FULL OVERLY MODELS 30 W. MODELS DESCRIPTION DFFB304 DFRB304 Overall Width Overall Height from Bottom 30 (76.2 cm) Min. 82 3/4 (210.2 cm) to Max. 84 1/16 (213.5 cm) Overall Depth from Rear To rear edge of side trim 23 13/16 (60.5 cm) To front of top grille 24 3/4 (62.9 cm) To front edge of door trim 24 (61.0 cm) Cutout Width Cutout Height Cutout Depth Electrical Requirements Maximum mp Usage 30 (76.2 cm) 82 7/8 (210.5 cm) min.; 84 1/16 (213.5 cm) max. 24 (61.0 cm) min.* 115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with grounded 3-prong plug attached to product. 9.9 amps Inlet Water 1/4 copper tubing inlet N/ Requirements waterline; minimum 20 psi; maximum 120 psi Overall Interior Dimensions Total Capacity 15.9 cu. ft. (450 liters) 18.2 cu. ft. (516 liters) pproximate Shipping Weight 425 lbs. (193.2 kg) 36 W. MODELS DESCRIPTION DFFB364 DFRB364 Overall Width Overall Height from Bottom 36 (91.5 cm) Min. 82 3/4 (210.2 cm) to Max. 84 1/16 (213.5 cm) Overall Depth from Rear To rear edge of side trim 23 13/16 (60.5 cm) To front of top grille 24 3/4 (62.9 cm) To front edge of door trim 24 (61.0 cm) Cutout Width Cutout Height Cutout Depth Electrical Requirements Maximum mp Usage 36 (91.5 cm) 82 7/8 (210.5 cm) min.; 84 1/16 (213.5 cm) max. 24 (61.0 cm) min.* 115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with grounded 3-prong plug attached to product. 9.9 amps Inlet Water 1/4 copper tubing inlet N/ Requirements waterline; minimum 20 psi; maximum 120 psi Overall Interior Dimensions Total Capacity 19.1 cu. ft. (541 liters) 22.8 cu. ft. (646 liters) pproximate Shipping Weight lbs. (227.3 kg) *Full overlay models fit flush in 25 (63.5 cm) deep cabinet openings. They can be installed in standard 24 (61.0 cm) deep openings. The door faces and top grille will protrude 3/4 (1.9 cm) into the room.

4 BSIC SPECIFICTIONS ND DIMENSIONS - FULL OVERLY MODELS DUL INSTLLTION* DESCRIPTION (2) 30 Units (1) 36 & (1) 30 Unit (2) 36 Units Overall Width 60 (152.4 cm) 66 (167.6 cm) 72 (182.9 cm) Overall Height from Bottom Min. 82 3/4 (210.2 cm) to Max. 84 1/16 (213.5 cm) Overall Depth from Rear To rear edge of side trim 23 13/16 (60.5 cm) To front of top grille 24 3/4 (62.9 cm) To front edge of door trim 24 (61.0 cm) Cutout Width 60 (152.4 cm) 66 (167.6 cm) 72 (182.9 cm) Cutout Height Cutout Depth Electrical Requirements Maximum mp Usage Inlet Water Requirements (ll Freezer Only) 82 7/8 (210.5 cm) min.; 84 1/16 (213.5 cm) max. 24 (61.0 cm) min.** (2) 115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with grounded 3-prong plug attached to product. 9.9 amps per unit 1/4 copper tubing inlet waterline; minimum 20 psi; maximum 120 psi Overall Interior Dimensions Total Capacity 30 Freezer 15.9 cu. ft. (450 liters) 30 Refrigerator 18.2 cu. ft. (516 liters) Total Capacity 36 Freezer 19.1 cu. ft. (541 liters) 36 Refrigerator 22.8 cu. ft. (646 liters) pproximate Shipping Weight 30 Freezer or Refrigerator 425 lbs. (193.2 kg) 36 Freezer or Refrigerator 500 lbs. (227.3 kg) *Requires separate grille kit accessory. **Full overlay models fit flush in 25 (63.5 cm) deep cabinet openings. They can be installed in standard 24 (61.0 cm) deep openings. The door faces and top grille will protrude 3/4 (1.9 cm) into the room. 7

5 SITE PREPRTIONS ND CONSIDERTIONS DESIGNER/FULL OVERLY MODEL LL REFRIGERTOR/LL FREEZER CBINET OPENING DIMENSIONS (1) 2 x4 Mounting board (1 1/2 [3.8 cm] x 3 1/2 [8.9 cm]) Note: If unit is installed deeper than 24 (61.0 cm), then shim behind anit-tip bracket thickness by the same amount 1-1/2 (3.8 cm) Bottom of anti-tip board is 3 7/8 (9.8 cm) below opening height. NOTE: Top of unit must be firmly seated under anti-tip board. 82 7/8 (210.5 cm) min. anti-tip board and opening height 84 1/16 (213.5) max. anti-tip board and opening height 73 3/8 (186.4 cm) Water line entry area (ll Freezer only) C* B C* 30 W. Designer 23 (58.4 cm) 30 (76.2 cm) 24 (61.0 cm) 30 W. Full Overlay 23 (58.4 cm) 30 (76.2 cm) 25 (63.5 cm) 36 W. Designer 29 (73.7 cm) 36 (91.5 cm) 24 (61.0 cm) 36 W. Full Overlay 29 (73.7 cm) 36 (91.5 cm) 25 (63.5 cm) B 12 *Full overlay models fit flush in 25 (63.5 cm) deep cabinet openings. They can be installed in standard 24 (61.0 cm) deep openings. The door faces and top grille will protrude 3/4 (1.9 cm) into the room.

6 SITE PREPRTIONS ND CONSIDERTIONS DESIGNER/FULL OVERLY MODEL LL REFRIGERTOR/LL FREEZER CBINET OPENING DIMENSIONS (1 per unit) 2 x 4 mounting boards (1-1/2 [3.8 cm] x 3-1/2 [8.9 cm]) NOTE: If unit is installed deeper than 24 (61.0 cm), then shim behind anit-tip bracket thickness by the same amount. B Electrical outlet location 1-1/2 (3.8 cm) 3-1/2 (8.9 cm) Electrical outlet location 6 (15.2 cm) 3-1/2 (8.9 cm) 9 (22.2 cm) 6 (15.2 cm) Bottom of anti-tip board is 3-7/8 (9.8 cm) below opening height. NOTE: Top of unit must be firmly seated under anti-tip board. 82-7/8 (210.5 cm) min. anti-tip board and opening height 84-1/16 (213.5 cm) max. anti-tip board and opening height 73-3/8 (186.4 cm) Water line entry area (ll Freezer only) C* D *Full Overlay models fit flush in 25 (63.5 cm) deep cabinet openings. They can be installed in standard 24 (61.0 cm) deep openings, however the door faces and top grille will protrude 3/4 (1.9 cm) into the room. Cutout opening shown with ll Freezer model on left. Reverse water line entry if ll Freezer model is on right. Dimensions shown for 36 F/R model on the right. Reverse mounting boards if units are installed opposite. B C* D (2) 30 W. F/R Designer 23 (58.4 cm) 23 (58.4 cm) 24 (61.0 cm) 60 (152.4 cm) (1) 36 W. F/R & (1) 30 W. F/R Designer 29 (73.7 cm) 23 (58.4 cm) 24 (61.0 cm) 66 (167.6 cm) (2) 36 W. F/R Designer 29 (73.7 cm) 29 (73.7 cm) 24 (61.0 cm) 72 (182.9 cm) (2) 30 W. F/R Full Overlay 23 (58.4 cm) 23 (58.4 cm) 25 (63.5 cm) 60 (152.4 cm) (1) 36 W. F/R & (1) 30 W. F/R Full Overlay 29 (73.7 cm) 23 (58.4 cm) 25 (63.5 cm) 66 (167.6 cm) (2) 36 W. F/R Full Overlay 29 (73.7 cm) 29 (73.7 cm) 25 (63.5 cm) 72 (182.9 cm) 13

7 SWING CONSIDERTIONS 30 W. PROFESSIONL MODEL 30 (76.2 cm) 29 (73.7 cm) 24-11/16 (62.7 cm) 15-27/32 (40.2 cm) 11-7/8 (30.2 cm) 3-1/32 (7.7 cm) 51 (129.5 cm) 49-1/16 (124.6 cm) 52-3/8 (133.0 cm) /2 (6.4 cm) 30 W. DESIGNER MODEL 30 (76.2 cm) 29 (73.7 cm) 24 (61.0 cm) 15-3/32 (38.3 cm) 10-31/32 (27.9 cm) 1-27/32 (4.7 cm) 51 (129.5 cm) 49-1/16 (124.6 cm) 52-11/32 (132.9 cm) /16 (5.2 cm) 17

8 SWING CONSIDERTIONS 30 W. FULL OVERLY MODEL 30 (76.2 cm) 29 (73.7 cm) 24-3/4 (62.9 cm) 13-7/16 (34.1 cm) 8-27/32 (22.5 cm) 1-3/32 (2.8 cm) 50-5/32 (127.4 cm) 51-31/32 (132.0 cm) 53-3/32 (134.9 cm) W. PROFESSIONL MODEL 36 (91.4 cm) 35 (88.9 cm) 24-11/16 (62.7 cm) 18-29/32 (48.0 cm) 14 (35.6 cm) 3-1/32 (7.7 cm) 54-7/32 (137.7 cm) 56-5/8 (143.8 cm) 58-11/32 (148.2 cm) /2 (6.4 cm) 18

9 SWING CONSIDERTIONS 36 W. DESIGNER MODEL 36 (91.4 cm) 35 (88.9 cm) 24 (61.0 cm) 18-3/16 (46.2 cm) 13-1/8 (33.3 cm) 1-27/32 (4.7 cm) 54-9/32 (137.9 cm) 56-11/16 (144.0 cm) 58-3/8 (148.3 cm) /16 (5.2 cm) 36 W. FULL OVERLY MODEL 36 (91.4 cm) 35 (88.9 cm) 16-9/16 (42.1 cm) 24-3/4 (62.9 cm) 11 (27.9 cm) 1-3/32 (2.8 cm) 57-23/32 (146.6 cm) 59-5/32 (150.3 cm) 55-7/16 (140.8 cm)

10 TIPPING CONSIDERTIONS 30 and 36 W. PROFESSIONL MODELS 111-1/16 (282.1 cm) 24-11/16 (62.7 cm) 1-1/2 (3.8 cm) B 3-25/32 (9.6 cm) 3-19/32 (9.1 cm) 86-11/32 (219.3 cm) 82-3/4 (210.2 cm) 82-3/4 (210.2 cm) C B C 30 W / /8 (299.4 cm) (76.2 cm) (223.2 cm) 36 W / /4 (320.7 cm) (91.5 cm) (229.2 cm) 30 ND 36 W. DESIGNER ND FULL OVERLY MODELS 109-5/16 (277.7 cm) 24 (61.0 cm) 1-1/2 (3.8 cm) B 3-25/32 (9.6 cm) 3-1/2 (8.9 cm) 82-5/8 (209.9 cm) 82-3/4 (210.2 cm) 82-1/16 (208.4 cm) C B C 30 W / /8 (299.4 cm) (76.2 cm) (223.2 cm) 36 W / /4 (320.7 cm) (91.5 cm) (229.2 cm) 20

11 LL REFRIGERTOR/LL FREEZER OVERLL DIMENSIONS DESIGNER MODELS TOP B B 30" W 30"(76.2 cm) 29"(73.7 cm) 36" W 36"(91.5 cm) 35 (88.9 cm) SIDE FRONT 25

12 CBINET ND PNEL INFORMTION - DESIGNER MODELS Designer models fit flush in standard 24 (61.0 cm) deep cabinet openings with no protrusion into the room except 2 (5.1 cm) curved handle depth 30" W 30"(76.2 cm) 36" W 36"(91.5 cm) 26

13 LL REFRIGERTOR/LL FREEZER OVERLL DIMENSIONS FULL OVERLY MODELS TOP B SIDE B 30" W 30"(76.2 cm) 29"(73.7 cm) 36" W 36"(91.5 cm) 35"(88.9 cm) FRONT 27

14 CBINET ND PNEL INFORMTION - FULL OVERLY MODELS Full overlay models, (with 3/4 [1.9 cm], thick panels and custome handles locally supplied), fit flush in 25 (63.5 cm) deep (countertop depth) cabinet openings with no protrusion into room except custom handles 30" W 30"(76.2 cm) 36" W 36"(91.5 cm) 28

15 CBINET ND PNEL INFORMTION - FULL OVERLY MODELS (CONTINUED) Full overlay models can be installed in standard 24 (61.0 cm) deep openings. However, the door faces and top ventilation grille will protrude 3/4 (1.9 cm) into the room. This is ideal for alignment with full overlay cabinet doors. DÉTIL C 29

16 CUSTOM PNEL DIMENSIONS - FULL OVERLY MODELS 30 W. MODELS 1/4" (0.6 cm) Base Panel 3/4 (1.9 cm) Full Overlay Panel 1/8 (0.3 cm) SECTION - SHOWN S MOUNTED ON NO SCLE 29 1/4 (74.3 cm) 36 W. MODELS 1/4" (0.6 cm) Base Panel 3/4 (1.9 cm) Full Overlay Panel 1/8 (0.3 cm) SECTION - SHOWN S MOUNTED ON NO SCLE 30

17 PNEL INSTLLTION FULL OVERLY MODELS 1. Remove cabinet side trim with a phillips screwdriver. 2. Remove handle-side door trim with a phillips screwdriver. 3. Install Z brackets (see below for details). 4. lign panel in door trim and push evenly. For smoother installation, apply liquid soap to door trim and Z brackets. 5. Install handle-side door trim with screws. Install door trim inserts (supplied) on top and both sides of door by starting in one corner and pushing the strip in place. 6. Install cabinet trim. (HINGE SIDE) Z BRCKET INSTLLTION - FULL OVERLY MODELS 3/4 (1.9 cm) Overlay Panel 1/4 (0.6 cm) Base Panel Z-BRCKET MOUNTING RER OF LL FREEZER OR LL REFRIGERTOR PNEL Z-BRCKET MOUNTED TO LL 4 EDGES 31

18 CUSTOM SIDE PNEL DIMENSIONS DESIGNER/FULL OVERLY MODELS FOR 3/4 (1.9 cm) SIDE PNELS NOTE: dding a 3/4 (1.9 cm) side panel adds an additional 3/4 (1.9 cm) to the overall width of the product for each side panel used. NOTE: Requires side panel hardware kit (Kit Model Number - SPHKDS) 82-7/8 (210.5 cm) to 84-1/16 ( cm) DEPENDING ON HOW HIGH LEVELING FEET RE RISED, ND CBINET ENCLOSURE HEIGHT OPTIONL KICKPLTE NOTCH, DIMENSIONS DETERMINED BY CBNETS 24 (61.0 cm) 24 (61.0 cm) OPTIONL KICKPLTE NOTCH, DIMENSIONS DETERMINED BY CBNETS 32