Fully Integrated 36 Bottom Mount

Transcription

1 Fully Integrated 36 Bottom Mount miele.ca

2 SPECIFICATIONS Features: MasterCool controls ClearView lighting system Drop and Lock Shelves SmartFresh storage drawers FullView storage drawers Ice maker RemoteVision capable Acoustic door and temperature alarm Optical door and temperature alarm Energy Star F 1903 Vi Right-hinged F 1913 Vi Left-hinged Overall Unit Width 35 3 /4 (908 mm) Overall Unit Height 83 1 / /16 (2121 mm mm) Overall Unit Depth 24 (610 mm) Niche Minimum Cabinet Opening Width 36 (915 mm) Minimum Cabinet Opening Height 83 5 /8 (2124 mm) Minimum Cabinet Opening Depth 25 (635 mm)* Plumbing Connect to a cold water supply only. Must be connected to a valve. The water valve must be accessible after installation. The water pressure must be Water Supply Requirements between 25 psi (1.7 bar) and may not exceed 80 psi (5.5 bar). If the pressure is higher than 80 psi (5.5 bar), a pressure reducing valve must be installed. Standard 1/4 O.D water line. The maximum outer diameter of the water pipe Water Connection Line (without 3/8 (10 mm). Water line is not included. Electrical 110V / 120V, 60Hz, 15 Amps In the case of side-by-side installations, Electrical Requirements - Volts/Amps a separate outlet must be used for each appliance. Power Cord - Plug and length NEMA 5-15 plug, 5 ft (1.52 m) Please refer to the manual for further Custom Panel details. Upper door - 84 lbs (38 kg) Maximum Panel Weight Lower door - 31 lbs (14 kg) Maximum Panel Thickness 1 1 /2 (38 mm) Minimum Panel Thickness 3 /4 (19 mm) Shipping Shipping Weight lbs (232 kg) Shipping Dimensions 39 1 /2 W x /16 H x 29 1 /4 D Support Call Miele Miele Website Please note: When combining multiple MasterCool units side-by-side, please refer to the Merging Kit Page 2 of 9 Sheets TRS

3 FOR FLUSH INSTALLATION * Niche depth assumes a 3/4 (19 mm) panel, please adjust according to custom panel thickness Page 3 of 9

4 POWER SUPPLY AND WATER CONNECTION BACK VIEW Water connection is located in front of unit. Electrical - 5 foot (1.52 m) Volt - 15 Amp - NEMA 5-15 molded plug SS DOOR PANEL DIMENSIONS (Available as an accessory) 35 3 /4 (908 mm) 26 7 /16 (672 mm) 53 5 /64 (1348 mm) /16 ( mm) Page 4 of 9

5 LOWER HINGE LOCATION Hinge Upper Door Hinge Lower Drawer / /2" 1/2 ( mm) 29 11/ /16" (754 mm) 1/2" 1/ /8" 3/8 (13-60 mm) Page 5 of 9

6 CUSTOM PANEL INSTALLATIONS These units do not come equipped with a front panel. They are designed to accept a custom door panel supplied by the cabinet maker. Miele has a unique panel integration system which allows the panels to align with the surrounding cabinets. Panel size is determined in the following manner: Width: Thickness: 35 3/4 3/4" (908 in all mm) casesin all cases Minimum Minumum 3/4 3/4" (19 outside mm) frame outside frame Standard Upper Panel Height: 53 5/16" 5/16 (1354 mm) Upper Panel Panel Height HOM Notes: Finish back side of panels to insure appearance Panel may extend above unit. This is not considered in height calculation Upper Maximum panel weight: Pounds Lower Panel Panel "B" Height TKH Lower Panel Height: Use the following calculation: Panel Height = HOM /16 -( TKH mm) - TKH HOM = Total height of machine. Can be adjusted to to match match adjoining cabinets cabinets - - typically 84" 84 (2133 HOM is mm). adjustable between 83 1/2" /8" HOM is adjustable between 83 1/2 - TKH = 85 Toe-kick 3/16 (2121 height mm (2" /8") mm) TKH Lower = Maximum Toe-kick height panel 2 weight: - 8 3/8 ( Pounds mm) Upper Panel Note s Lower Maximum panel weight: 31 Pounds If the adjoining cabinets are taller than the height of machine (HOM) - the upper panel may be extended accordingly. Find the difference between height of the adjoining cabinets and the height of machine (HOM) and add to 53 5/16" Adjoining cabinet Extended Panel Machine Example: Ajoining cabinet height: 87 87" (2210 mm) Height of machine: 84 84" (2133 mm) Difference: 3 3" (76 mm) Extended panel height: 56 5/16 5/16" (1430 mm) Page 6 of 9

7 HINGING DETAILS 90 Door 115 Door Thickness options Thickness options 0-1/8 (3 mm) 0-1/8 (3 mm) 0-1/8" 0-1/8" 0-3/4 (19 mm) 0-3/4" 1 (25 mm) 1" 1-1/4 (32 mm) 1-1/4" 1-1/2 (38 mm) 1-1/2" 1-3/4 (44 mm) 1-3/4" 0-3/4 (19 mm) 0-3/4" 1 (25 mm) 1" 1-1/4 (32 mm) 1-1/4" 1-1/2 (38 mm) 1-1/2" 1-3/4 (44 mm) 1-3/4" 2 (51 mm) 2" Cabi net Fr ont Cabi net Fr ont 0-3/4 (19 mm) 0-3/4" 0-3/4 (19 mm) 1 (25 mm) 1-1/4 (32 mm) 1-1/2 (38 mm) 1-1/2" 1-1/4" 1" 0-3/4" Front Panel 1 (25 mm) 1-1/4 (32 mm) 1-1/4" 1" Fr ont Pa nel 1-1/2 (38 mm) 1-1/2" Door Swing 7/16 7/16" (11 mm) Door Swing 11 3/4 ( /8" mm) MAX Max /16 11/16" (982 mm) NOTE: Additional space needed depending on thickness of front panels and handle used NOTE: Additional space needed depending on thickness of front panels and handle used Page 7 of 9

8 HINGING DETAILS 115 o OPENING 0-1/8 (3 mm) 0-1/8" 0-3/4 (19 mm) 0-3/4" 1 (25 mm) 1" 1-1/4 (32 mm) 1-1/4" 1-1/2 (38 mm) 1-1/2" 1-3/4 (44 mm) 1-3/4" Cabi net Front 1-3/8 (35mm) 1-1/6 (29.6mm) 17/24 (18mm) 1/4 (6.4mm) 3 (76.2mm) 2-5/8 (67mm) 2-1/3 (59mm) 2-1/24 (52mm) 1-3/4 (44.5mm) 1-1/2 (38 mm) 1 (25 mm) 1-1/4 (32 mm) 0-3/4" 1" 1-1/4" 1-1/2" 0-3/4 (19 mm) Front Panel Page 8 of 9

9 HINGING DETAILS 90 o OPEING 0-3/4 (19 mm) 0-3/4" 1 (25 mm) 1" 1-1/4 (32 mm) 1-1/4" 1-1/2 (38 mm) 1-1/2" 1-3/4 (44 mm) 1-3/4" 2 (51 mm) 2" 7/16 (11 mm) 1-3/16 (30mm) 1-7/16 (36.5mm) 1-11/16 (43mm) 1-15/16 (49.2mm) 0-1/8 (3 mm) 0-1/8" Cabi net Front Handle or object that is Front. 0-3/4 (19 mm) 1 (25 mm) 1-1/4 (32 mm) 1-1/2 (38 mm) 1-1/2" 1-1/4" 1" 0-3/4" Fr ont Pa nel When installing hinge side next to an appliance or object that is within range of the door panel, limit the door opening angle to 90 o. This is done by installing the banking pin as illustrated. Insert the banking pin through the holes and drive in with a hammer. Page 9 of 9