VH Super Miniature Lighted Pushbutton Switch. Only 10.6mm depth behind panel permits space saving on machinery.
|
|
- Dwayne James
- 6 years ago
- Views:
Transcription
1 Super Miniature Lighted Pushbutton Switch Only 10.6mm depth behind panel permits space saving on machinery. Flanged type for panel mounting and without flange type for PB available. FEATUES Depth behind panel : Only 10.6mm LED Full-Face, Dual-olor illumination available. Button Size: 12mm square type, 12 17mm rectangular type Incorporated leaf spring snap action switch assures high reliability and light operating touch. Signal Load urrent and High apacity ontact provided. Accessories: Barriers, Guard overs, Sockets, etc. High Brightness LED type, Super Blue, Super White, Super Green available. Switch onnection N SPEIFIATIONS ontact Electrical ating Insulation esistance Dielectric Strength ontact esistance Mechanical Life Electrical Life Ambient Temperature Ambient Humidity Signal Load urrent Type (Gold plated) A, D30V 0.05A(esistive) 600V A MS between N and terminal 1500V A MS between terminals and ground 50/60Hz for 60sec. at normal ambient temperature and humidity Less than 100m (Initial) at D6V 0.05A High apacity Type (Silver contact with gold plated) A125V, 250V 5A(esistive) More than 100M at 500V D 1000V A MS between N and terminal 1500V A MS between terminals and ground 50/60Hz for 60sec. at normal ambient temperature and humidity Less than 30m (Initial) at D6V 1A Momentary Action :more than 1,000,000 operations Alternate Action : more than 200,000 operations More than 200,000 operations at max. rated load More than 30,000 operations at max. rated load 15 to 50 80% H (max.) OPEATING HAATEISTIS Operating Force (max.) 2.45N Total Travel (max.) 2.5mm
2 STUTUE BUTTON FILTE (Use with clear button) HOUSING Without Flange With Flange Without Flange With Flange DIMENSIONS With Flange 12 17mm ect. Button 12mm Square Button (15.6) (15.6) N N Top View Top View
3 DIMENSIONS Without Flange 12 17mm ect. Button 12mm Square Button 0.6 (16) (16) N N Top View Top View INTENAL ONNETION AANGEMENTS LED (ed, Green, Yellow) Dual-olor ombination LED Full-Face (ectangular) LED Full-Face (Square) Any Voltage Mono-olor BOTTOM VIEW TOP VIEW BOTTOM VIEW TOP VIEW L2 L1 L2 L1 L Dual-olor L( ) L1 L( ) L2 ed Green Green Yellow Yellow ed
4 TEMINALS LAYOUT STDP BOTTOM VIEW TEMINALS DTDP INDIATO 12 17mm ect. Button 12mm Square Button Dual-olor Mono-olor Dual-olor Mono-olor BOTTOM VIEW BOTTOM VIEW BOTTOM VIEW N N N N L N N N N N N N N L L TEMINALS DIMENSIONS (BOTTOM VIEW) 12mm Square Button 6 N N 6 N N L1 L mm ect. Button 2.54 N N N N L 6 6 L2 L Mono-olor Dual-olor Mono-olor Dual-olor TEMINAL SHAPE / PB HOLE UT-OUT TEMINAL SHAPE PB hole cut-out (BOTTOM VIEW) Soldering Terminal PB Terminal Mono-olor Dual-olor In case of mounting switches side by side, Please note there is a 0 difference between Square type and ectangular type.
5 LED DATA LED ATINGS ITEM Max. operating current I FM (ma) D reverse voltage V (V) Forward voltage V F (V) ecommended operating current I F (ma) urrent educed Factor (Over 25 working Temperature) Wiring Diagram ed, Yellow Mono-olor Green S. Blue S. White S. Green Dual-olor ed Green Yellow mA/ 0.4mA/ Fig.1 Fig.2 IF Fig.1 VF LED POTETION ESISTO As LED protection resistor is not built-in, please apply external resistor according to following: Standard Brightness Voltage Mono-olor Dual-olor (V) ed, Yellow Green S. Blue S. White S. Green ed Green Yellow 5( 5%) 130 1/8W 51 1/8W 160 1/8W 240 1/8W 510 1/8W 51 1/8W 33 1/8W 43 1/8W 12( 5%) /4W 510 1/4W 10 1/4W /4W /4W 430 1/4W 30 1/4W 30 1/4W 24( 5%) /2W /2W /2W /2W /2W /2W /2W /2W Lower Brightness Voltage Mono-olor (V) ed Green Yellow S. Blue S. White S. Green 5( 5%) 240 1/8W 1 1/8W 270 1/8W 430 1/8W 550 1/8W /8W 12( 5%) /4W 830 1/4W /4W /4W /4W /4W 24( 5%) /2W /2W /2W /4W /4W 15K 1/4W Vcc Vcc IF IF VF Fig.2 The value of the series resistor can be determined by the formula: Vcc IF VF Vcc: Supply Voltage VF : Forward Voltage IF : Forward urrent With Guard over * Pulse Lighting Pulse Width Pw = 100 s Duty atio D = 10 1 IFM = 120mA (any color) PANEL LAYOUT / PANEL UT DIMENSIONS 12mm Square Button Panel Layout Panel ut Dimensions With Barriers Without Barriers n (n 1) (n 1) (n 1) 1 * Panel ut Dimension should be after panel paintings. n : number of switches Tolerance : 0.4mm
6 PANEL LAYOUT / PANEL UT DIMENSIONS Panel Layout Panel ut Dimensions With Guard over (n 1).4n mm ect. Button Panel Layout Panel ut Dimensions Without Barriers (n 1) 22.8n With Barriers (n 1) (n 1) 1 With Guard over (n 1) 26.4n 1 Panel thickness: mm Panel thickness: mm(Guard over use) n : number of switches
7 PANEL LAYOUT / PANEL UT DIMENSIONS AESSOIES enter Barrier -075-K -075-G Side Barrier -076-K -076-G K -108-H K H (n 1) 18.2 t With Flange In case of Group Mounting, please leave space as below. With Flange, With Barriers more than 3.0 In case of Group Mounting, please more than 3.0 leave space as below. more than 3.0 more than 3.0 BAIES In case of mounting switches in series, barriers can be used to prevent inadvertent pushing neighbor switch. Part No. Gray enter Barrier Side Barrier GUAD OVE (WITH FLANGE) Guard over prevents inadvertent and unintentional operations. 12mm Square Button 12 17mm ectangular Button Part No. Square ect. Gray Gray * The cover to be opened 0 and stopped. GUAD OVE (WITHOUT FLANGE) 12mm Square Button 12 17mm ectangular Button Part No. Square Gray K H ect K Gray H * The cover to be opened 0 and stopped. Panel ut Dimensions for without flange guard cover panel t (n 1) PB Panel thickness: mm
8 AESSOIES SOKET Non esistor Built-in esistor N N N N Soldering Terminal 16 Soldering Terminal 16 Soldering Terminal Voltage olor 5V 12V 24V Non esistor ed, Yellow /2W /2W /2W Green S. Blue S. White S. Green /2W /2W /2W /2W /2W /2W /2W /2W /2W /2W /2W /2W Note 1. Socket to be used for Solder terminal type of Switch Unit. Note 2. Socket not to be used for ectangular switch unit. Note 3. Socket not to be used for Dual-olor type. FILTE DIMENSIONS Legend Face Legend Face Please order replacement parts with Part No. Button/Filter Item Square Button ect. Button Square Filter ect. Filter olor EPLAEMENT PATS ed Green Yellow Milk-White lear * G -3-1G -085-G -5-G Y -3-1Y -085-Y -5-Y M -3-1M -085-M -5-M K -3-1K * Non illuminated only
9 ODEING ODE LED Illumination 1 2 M A L OPEATION Momentary Alternate Indicator Please note Alternate type is ava ilable only for Squre Butten ONTAT 0 Indicator SPDT DPDT SPDT DPDT 0.05A30VA D 0.05A30VA D 5A125V / 250VA 5A125V / 250VA BUTTON SHAPE S Square W ect. ILLUMINATION TYPE 70 ed 80 Green 0 Yellow Full-Face : 14 S. Blue Put color no. into the frame 1 16 S. White 18 S. Green Without LED 7 8 ed Dual-olor : Put color Green no. into the frame 1,2 Yellow (78,8,7) TES 1) In case of Dual-olor, button should be (clear) with Milk-White filter or Milk-White button. 2) Please be noted that the color of "Yellow" for LED, Button, Filter is actually "Orange Yellow" not Lemon Yellow. TEMINAL S Solder PB FILTE 1 ed 2 Green 3 Yellow 4 Milk-White Without Filter Note : Filter not to be used with colored button. HOUSING OLO K G Gray FLANGE 1 Without Flange 2 With Flange BUTTON OLO * G Y K M ed Green Yellow Milk-White lear Without Button * Non illuminated only
Full-Face, Split-Face, Dual-Color with built-in resistor. Oil and Water-Tight Version to IP65 available.
Miniature Lighted Pushbutton Switch KH Full-Face, Split-Face, Dual-olor with built-in resistor. Oil and Water-Tight Version to IP65 available. FEATUES mm (.67 ) mounting hole. Depth behind panel : Only
More informationOnly 22.5mm depth behind panel with built-in resistor
Miniature Lighted Pushbutton Switch R Only.mm depth behind panel with built-in resistor Bright and Variable Illumination makes easy planning of multiple design. FEATURES Depth behind panel : Only.mm LED
More informationOnly 22.5mm depth behind panel with built-in resistor
Miniature Lighted Pushbutton Switch R Only.mm depth behind panel with built-in resistor Bright and Variable Illumination makes easy planning of multiple design. FEATURES Depth behind panel : Only.mm LED
More informationOnly 35mm depth behind panel with built-in resistor
Lighted Pushbutton Switch R LED Only 5mm depth behind panel with built-in resistor Reliable Push-Feeling and valiable illumination Full-Face, Split-Face(,, ). FEATURES Depth behind panel : Only 5mm LED
More informationHigh reliability EH-N type
/ -N Miniature Lighted Pushbutton Switch RoHS Only.mm depth behind panel with built-in resistor Bright and Variable Illumination makes easy planning of multiple design. FEATURES Depth behind panel : Only.mm
More informationHigh reliability EH-N type
/ EH-N Miniature Lighted Pushbutton Switch RoHS EH Only.mm depth behind panel with built-in resistor Bright and Variable Illumination makes easy planning of multiple design. FEATURES Depth behind panel
More informationOnly 21.5mm depth behind panel with LED Full Face, Illumination.
R LED Lamp Subminiature Lighted Pushbutton Switch Only 21.5mm depth behind panel with LED Full Face, Illumination. FEATURES Depth behind panel:only 21.5mm. LED Full Face Illumination provided. size: 14.2mm
More informationA Series. Miniature Control Units
TEIH-ATM Electronic Auf der Bült 10-12 D 41189 Mönchengladbach Tel. 02166 958545 Fax 02166 958547 email: atm@treichl.de internet: A Series Miniature ontrol Units A Series Miniature ontrol Units Series
More informationDistinctive Characteristics
Distinctive haracteristics arefully designed light diffusion and filtering system produces bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor
More informationGeneral Specifications
Series HB Subminiature Pushbuttons General Specifications Electrical apacity (Resistive Load) Power Level (silver): 0.1A maximum @ 30V A/ Other Ratings ontact Resistance: 50 milliohms maximum Insulation
More informationA series Switches & Pilot Lights
A series Switches & Pilot ights ø16 ø12 ø10 ø8 A Series Selection Guide Series A6 Series Switches and Pilot ights Mounting Hole Size ø16 Model A6 AB6 AS6 AS6 (key) Disc tumbler key Shape Wave key Unit
More informationGeneral Specifications
Standard Size Pushbuttons General Specifications Electrical apacity (Resistive Load) Power Level (silver): 3A @ 125V A or 3A @ 250V A or 3A @ 30V Logic Level (gold): 0.4VA maximum @ 28V A/ maximum (Applicable
More informationLW Series offer flexibility in space-saving package
ourtesy of Steven Engineering, Inc. 230 yan Way, South San Francisco,, 94080-6370 Main Office: (650) 588-9200 Outside Local rea: (800) 258-9200 www.steveneng.com LW Series offer flexibility in space-saving
More informationGeneral Specifications
Series D Light Touch Miniature Pushbuttons General Specifications Electrical apacity (Resistive Load) Logic Level: 0.VA maximum @ 8V A/D maximum (Applicable Range 0.mA ~ 0.A @ 0mV ~ 8V) Note: Find additional
More information7000 SERIES ROCKER AND PADDLE SWITCHES Overview
Overview 7 SERIES Number of poles Terminals 3 Single pole 4 Double pole onsult factory for three and four pole models. Blank W WW Y } Y4 } Y6 } Y7 } Z Solder lugs or straight P depending on model Right
More informationWe Make It Easy! 3. All of our switches are shipped complete, just as ordered. No incomplete or partial deliveries of subcomponents and accessories
We Make It Easy! 1. We assemble the parts for you saves you time and money. Includes LEDs and accessories 2. Easy to order all options and accessories displayed in easy-to-follow ordering table. No complicated
More informationGeneral Specifications
Series E Light Touch Miniature Pushbuttons eneral Specifications Electrical apacity (Resistive Load) Power Level (silver): A @ 25V A for silver contacts Logic Level (gold): 0.4VA maximum @ 28V A/D maximum
More informationMW Series Control Units
IP waterproof and dust-proof enclosure Suitable for installation in harsh environment, such as construction machines Prevents entry of sand and dust. eliable operation under high operation load Solder/tab
More informationMiniature Switches & Pilot Devices
A8 Series Miniature Switches and Pilot Devices: 8mm Key features of the 21/64" (8mm) A8 series Switches and Pilot Devices include: 21/64" (8mm) round mounting hole Compact Design Saves Space Bright and
More informationø8 A8 Series Miniature Control Units
A8 ø8 A8 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals
More informationø10 A1 Series Miniature Control Units
A1 ø10 A1 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals
More informationSeries LP. Illuminated Pushbutton Switches HOW TO ORDER SPECIFICATIONS: WPL-25
SPECIFICATIONS: CONTACT: Silver contact (Gold plated). ELECTRICAL RATING: AC125, 2V 1A @ resistive load). INSULATION RESISTANCE: More than Mohms at DC 0V. DIELECTRIC STRENGTH: a. 0V RMS(/60Hz) between
More informationCircuit Breakers. Switching & Controls. Selection Guide NC1V Series Dimensions Accessories
Switching & ontrols Selection Guide... 922 1V Series... 923 Dimensions... 929 Accessories... 932 ircuit Breakers Switches & Pilot Lights Signaling Lights Relays & Sockets Timers ontactors Terminal Blocks
More informationø12 A2 Series Miniature Control Units
ø2 A2 Series Miniature Control Short 22-mm-long body miniature control unit series with bright LED illumination face and snap-action switching. Degree of protection: IP40 and IP5 (IEC 0529) All series
More informationBright illumination face and snap-action switching.
ø A2 Series ø10 A1 Series ø8 A8 Series A2 Series A1 Series A8 Series Bright illumination face and snap-action switching. See website for details on approvals and standards. Hole Size Model Function Degree
More informationGeneral Specifications
Series M eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive Load)
More informationSwitches & Pilot Devices
ø16mm - A6 Series A6 Series Miniature Switches and Pilot Devices: 16mm Key features: 16mm (/8 ) mounting hole ED illumination ompact design saves space Momentary, Maintained, Selectors, and E-Stops Gold-clad
More informationCircuit Breakers. Switching & Controls. Selection Guide NC1V Series Dimensions...
Switching & ontrols Selection Guide... 1028 1V Series... 1029 Dimensions... 1035 www.ide.com/circuitbreaker ircuit Breakers Switches & Pilot Lights Signaling Lights Relays & Sockets Timers ontactors Terminal
More informationMiniature Switches & Pilot Devices
ø16mm - 6 Series Miniature 6 Series Miniature Switches and Pilot Devices Key features of the 5/8 6 Series include: 5/8 (16mm) mounting holes ocking lever removable contact blocks Solder terminal or PB
More informationDistinctive Characteristics
Distinctive Characteristics Wide selection of illumination effects is achieved with single and bicolor, - or -element LEDs, in flat, beveled, or sculptured caps. LED colors include red, amber, green, white,
More informationDistinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Short Body Pushbuttons Series YB Choice of super bright LEDs in white,
More informationTYPICAL SWITCH ORDERING EXAMPLE TERMINALS
Series M TYPIL SWITH ORDERIN EXMPLE M0 S 0 POLES SMLL TOLES SMLL BUSHINS ONTT MTERILS & RTINS OPTIONL PS P OLORS SPDT DPDT SPT PDT * PDT DPT * -pole available on vertical models only. IRUITS ON NONE ON
More informationSeries. Robust and attractive.
Series 82 Robust and attractive. www.eao.com Series 82 Robust and attractive. With Series 82, EAO offers the optimal pushbutton for vandal-resistant, stylish HMI controls used in harsh industrial environments,
More informationSERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 1 (4) A 50 V AC PRODUCT FEATURES 100 million times proven switching principle High, fl exible design variety Excellent actuating characteristic Illuminated and non-illuminated variants ON REQUEST Other
More informationDistinctive Characteristics
Distinctive Characteristics Carefully designed light diffusion and filtering system produce bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor
More informationLighted Pushbutton Switch
Lighted Pushbutton Switch General Purpose and Micro-Voltage/Current Load Switch Requires only 22 mm mounting depth All LEDs, lamps, legends and pushbutton units replaceable without tools Oil-resistant
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA
More informationSwitches & Pilot Devices
Selection Guide... 45 Miniature... 45 AP Series ø8-6mm... 45 A8 Series ø8mm... 456 ø6mm... 46 A E-Stops ø6mm... 46 B Series ø6mm... 468 6 Series ø6mm... 5 ømm... 55 W E-Stops ømm... 55 W Series ømm...
More informationTYPICAL SWITCH ORDERING EXAMPLE. Contact Materials & Ratings. Silver Rated 125V AC & 250V AC Gold Rated 0.4VA 28V AC/DC max.
Large ushing Miniature Pushbuttons Series M000 S M Poles & ircuits 0 SPDT () 06 SPDT 06 DPDT () 08 DPDT 8 PDT () 8 PDT ( ) = Momentary Plunger Type TYPIL SWITH ORDERING EXMPLE 0 S W 0 D Plunger for Screw-on
More informationDistinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Choice of super bright LEDs in white, green, and blue as well as bright
More informationJAY-EL MARK 10 P/N ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-22885
TOP MARK 10 JAY-EL MARK 10 ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-22885 Catalog No. 7010-5 11-03 MARK 10 DESIGN FEATURES ELECTRICAL THIS SWITCH IS DESIGNED TO MEET THE EXACTING REQUIREMENTS
More informationANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationAM5 (QV) SWITCHES AM5
MINIATURE SWITHES WITH HIGH PREISION (QV) SWITHES 5.9 FEATURES High precision as a result of designing ideal spring by using computer analysis O.P. 4.7±0.4mm Reliable design with shock resistance min.
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive oad) Power evel (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C ogic evel (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA ~ 0.1A
More informationDistinctive Characteristics
Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter
More informationMPB16 Series 16mm Metal Pushbutton Switches
MPB6 Series 6mm Metal SPECIFICATIONS ATING : A/36VDC ELECTICAL LIFE : 00,000 make-and-break cycles at full load MECHANICAL LIFE :,000,000 cycles INSULATION ESISTANCE : DIELECTIC STENGTH :,000V MS @ sea
More informationNRA Series. Between main circuit terminals: 2,000V AC, 1 minute Between main circuit and auxiliary contact: 2,000V AC, 1 minute
RA Series RA Series RAS RA Key features of the RA series include: Available in 4 different styles Excellent overload and short circuit protection Small size and high-efficiency Life expectancy of over
More informationGeneral Specifications
Series M Waterproof Miniature eneral Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive
More informationDistinctive Characteristics
Distinctive Characteristics Full face and spot illumination available. Front panel relamping. Choice of super bright LEDs in white, green, and blue in addition to bright red, amber, and green LEDs. Compact
More informationGeneral Specifications
Series FB & SB Momentary Pushbuttons General Specifications FB Series Electrical apacity (Resistive Load) Power Level: 500mA @ 125V A for silver Logic Level: 0.4VA max. @ 28V A/D max. for gold (Applicable
More informationIlluminated pushbutton, non-illuminated pushbutton, selector, key selector switches
ND Series: 16 dia. types (AEL, ABL, ASL, AKL) Illuminated pushbutton, non-illuminated pushbutton, selector, key selector switches Bright, clear illumination (ultra-high intensity LED used) Separate mounting
More informationGeneral_technical_data Series
Indicator Lens Actuator Cable 2-poles with plug-in connection 2.8 x 0.8 mm Flat plug-in housing rectangular, AMP No. 626 057-0 Receptacle housing AMP No. 626 0-0 Receptacle socket AMP No. 160 655-2 Wire
More informationYB2 Panel Seal. New Square Actuator Option. Series YB2. Contact No Thin Flush Mount Pushbuttons. 24mm Square Panel Seal Pushbuttons
Contact No. 182 YB2 Panel eal Thin Flush Mount Pushbuttons New quare Actuator Option 2011-01-26 www.nkk.com 1 General pecifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V
More information300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES
FEATURES Dry circuit through power ratings. ompact size SPST momentary and alternate action models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted and unlighted. SPEIFIATIONS
More informationGeneral Specifications
eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Electrical apacity (Resistive Load) Power Level
More informationGeneral Specifications
Series FB & SB Momentary Pushbuttons General Specifications FB Series Electrical apacity (Resistive Load) Power Level: 500mA @ 125V A for silver Logic Level: 0.4VA max. @ 28V A/D max. for gold (Applicable
More informationAPEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator
APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator Distinctive features and applications Common features Large
More informationCIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationRU Series Universal Relays
Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator available on plug-in relays No internal
More informationGeneral Specifications
Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 5A @ 5/50V AC or 5A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable
More informationGeneral Specifications
Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 5A @ 5/50V AC or 5A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable
More informationIndustrial Relay KML(1C, 2C)
Industrial Relay KML(1C, 2C) Features 1C: 15A, 2C: 10A switching capability 1.5kV dielectric strength (between coil and contacts) Various terminals available Socket available 1 & 2 poles configurations
More informationContents Pushbuttons. AB Series...C6 0.4VA Logic Level; Process Sealed Straight, Right Angle, & Vertical PC
ontents Pushbuttons B Series... 0.V Logic Level; Process Sealed Straight, Right ngle, & Vertical P BB Series... ntistatic; 0.V Logic Level; Process Sealed Straight, Right ngle, & Vertical P DB Series...
More informationLW Silhouette Series. Illuminated Key Selector Switches Pushbuttons and Illuminated Pushbuttons with Round Guard. LW Silhouette Switches
W Silhouette Series Illuminated Key Selector Switches Pushbuttons and Illuminated Pushbuttons with ound Guard W Silhouette Switches W Silhouette Series Illuminated Key Selector Switches The two-way split
More informationIL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Distinctive features and specifications Momentary pushbuttons for thick panels Illuminated or non-illuminated Tactile feedback Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS
More informationCommon features. Installation options. Aesthetic options
New! LPI series Distinctive features and applications UG1006-A Common features Large ergonomic actuator (Ø 35 mm) Tactile feedback Low behind-panel depth (21 mm max.) Stylish design Long life This series
More informationIndicator body round for raised full face, black plastic, 22.5 mm mounting. Part No For complete switch also order
Series 14.5 mm 0.5 mm IP67 5 50 V INDITOR pushbutton keylock selector buzzer hoose one component from each of the coloured sections to assemble a complete switch. Product Profile Indicator The Series 14
More informationGeneral Specifications
Standard Size Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum
More informationSwitches & Pilot Devices
ø16mm - 6 Series Key features: 5/8 (16mm) mounting holes ocking lever removable contact blocks Solder terminal or PB terminal options Available assembled or as sub-components Worldwide approvals Incandescent
More informationEmergency Stop Switch A165E. Ordering Information. Mounting Aperture of 16 mm
Emergency Stop Switch Mounting Aperture of 16 mm Modular construction, easy installation Positive opening mechanism with minimum contact separation of 3 mm in accordance with EN60947-5-1, Conforms to EN418
More informationTYPICAL SWITCH ORDERING EXAMPLE A2 G 40. Contact Materials & Ratings
MB4 s & ircuits SPDT ON (ON) DPDT ON (ON) ( ) = Momentary E E S S Bushings Smooth with D Flat Threaded with D Flat IMPORTNT: Switches are supplied without UL, culus & S marking unless specified. UL, culus
More informationø25mm TWS Series Control Units
ø25mm TWS Series ontrol Units ø25 TWS Series ontrol Units (Selection Guide) Function ategory Flush Extended Pushbutton Extended with Half Shroud Momentary/ Extended with Full Shroud Mushroom Shape ABS1
More informationø22mm LW Series Control Units
ø22mm W Series ontrol Units ø22 W Series ontrol Units (Selection Guide) Function ategory ound Flush Square Flush Pushbutton ound Flush with Square Bezel Momentary/ ound Extended Square Extended W1B- 1
More information3.2. Pushbuttons. For Immediate Delivery or Tech Support call KMParts.com at (866) Contents
. Pushbuttons Product Description Eaton offers a wide range of pushbutton switches for standard industry applications such as appliances, electronics, medical and test instrumentation, office equipment
More informationø22mm HW Series Control Units Control Units
mm HW Series Control Units Control Units HW Series Control Units (Selection Guide) Function Emergency Stop Switch (Unibody Type) Emergency Stop Switch (Separate Type) Pushlock Turn eset Category ø40mm
More informationB3F. Miniature, Space-saving Switch
B3F Miniature, Space-saving Switch Long mechanical / electrical service life Ideal for applications such as audio, office and communications equipment, TVs, etc Taped radial, vertical, high-force, and
More informationSWITCHES MULTIPLE STATION SWITCHES FAX:
FAX: 773 79-9 MULTIPLE STATION MULTIPLE STATION 301 SERIES IBS SERIES 5000 DW MULTI-SWITCH SERIES 000, 7000 DW MULTI-SWITCH FEATURES Switches are designed to meet performance requirements of sophisticated
More informationMechanical Key Switch
Mechanical Key Switch B3F A Wide Range of Models: 6 x 6 mm, 12 x 12 mm, Vertical and High-force. Excellent tactile feel combined with high life expectancy. Available in stick packaging for automatic mounting
More informationLighted PushButton Switch
Lighted PushButton Switch Cylindrical 8mm dia. Subminiature Series Featuring Short Mounting Depth Round, square and rectangular LED pushbutton units. types also available. Requires only 18mm mounting depth.
More informationMiniature microswitches - Positive break
1 Miniature microswitches - Positive break 81607 Coil spring snap-action mechanism with wiping contacts Positive opening action according to IEC 6097-5-1 Annex K atings from 10 ma Vc to 6 A 250 Va Very
More informationGeneral Specifications
Standard Size Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker
Magnetic and Hydraulic-Magnetic Circuit Breaker 835-... Description Single or multipole hydraulic-magnetic circuit breakers with trip-free - mechanism and toggle actuation. A choice of switching characteristics
More informationKiosks. Body Finish Options. Actuator. Lens Color Options. Rating Options. Anodized 48VDC. 1 - Black Anodized. 7 - Blue 8 - Green 9 - Red.
Applications / Markets Audio / Visual Security Devices Industrial Controls Specifications Electrical Rating: 2A, 8VDC Mechanical Life: 200,000 Cycles Electrical Life: 50,000 Cycles Contact Resistance:
More informationSeries R19. Power Rocker Switches MARK OPTIONS COLOR OPTIONS TERMINATION OPTIONS HOW TO ORDER
CONTACT RATING: 6A 250VAC 10A 125VAC. ELECTRICAL LIFE: 10,000 Operations. MECHANICAL LIFE: 50,000 Operations. CONTACT RESISTANCE: 1,000M-ohms. DIELECTRIC STRENGTHS: >1,500
More informationA3S. Pushbutton Switch Series with Square 40-mm Body. Lighted Pushbutton Switch (Square) List of Models
Lighted Pushbutton Switch (Square) CSM DS_E_7_ Pushbutton Switch Series with Square 40-mm Body Combines miniature design with distinct but soft sense of operation. Easy panel mounting from the front and
More informationDistinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and
More informationSERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 1 (4) A 50 V AC ROCKER SWITCHES PRODUCT FEATURES 100 million times proven switching principle High, fl exible design variety Excellent actuating characteristic Illuminated and non-illuminated variants
More informationSERIES. LED-Lit Push-Button Switches and Indicators. switches and indicators. SERIES 2 PRODUCT LINE-UP
LED-Lit Push-Button Switches and Indicators SERIES 2 LED-lit (DC and 24Vac) switches and indicators. You can build the product best suited to your specifications by combining standard parts Selection of
More informationGeneral Specifications
Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators eneral Specifications lectrical apacity Resistive Load: 0 @ 5V, @ 50V, or @ 0V Inductive Load: 5 @ 5V (P.. @.0) Other
More informationIQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting
Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting Distinctive features Like the IR series, the IQ series is a range of sealed pushbutton switches with dia. 16 mm bushing. But IQ pushbuttons
More informationDEMEX ISO9001:2000 IP65 22 series
IP65 series Properties Series /5 series 30 series Standard operating conditions Operating temperature: -5 to +50 Operating humidity: 45 to 85% H Operating temperature: -5 to +50 Operating humidity: 45
More informationA165-E. Ordering Information. Emergency Stop Switch. For Panel Cutout of 16 mm
Emergency Stop Switch For Panel Cutout of 16 mm H Modular construction, easy installation H Positive opening mechanism with a minimum contact separation of 3 mm in accordance with EN6947-5-1, for NC contacts
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker
Magnetic and Hydraulic-Magnetic Circuit Breaker 835-... Description Single or multipole hydraulic-magnetic circuit breakers with trip-free - mechanism and toggle actuation. A choice of switching characteristics
More informationSealed Pushbutton Switches
For application help: call 1-800-537-945. Honeywell MICO SWITCH Sensing and Control 113 meet high-performance needs for rugged, compact size sealed switches that are exposed to water, oil, cleaning solvents,
More informationA1-A01-A02-A03 series Industrial controls
A-A0-A0-A0 series Industrial controls Distinctive features The A0 and A0 series offer ranges of : - pushbutton switches, illuminated or not - indicators - or position keylock switches - or position rotary
More information[ Bezel size ] [ From panel front ] [ Shape ] [ Contact rating ] [ Action ] Unibody
and Series Suitable for a wide variety of office and factory aplications. Features IE s original mechanism for snap-action switching. The E lamp contains a current-limiting resistor and a diode for protection
More informationSealed pushbutton switches - bushing Ø 16 mm - momentary
Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families
More informationFunctions The Series 19 incorporates the following functions: Indicator Pushbutton Illuminated pushbutton
Edition 11/2013 HMI-Components 19 Series Characteristics The compact 8 mm Series 19 is especially suited for: Raised design PCB (with adaptor) The low level switching element is laid out for low current
More informationLUMOTAST FK. General data. Content
General data TAST illuminated pushbutton range Illuminable pushbuttons and signal lamps with lamp socket T /T / 4. Please order lamps / LEDs separately. Mounting hole diameter 6.2 mm 42 V/00 ma max. Water-jet
More information22mm Push Buttons and Switches
PUSH UTTONS/SWITCHES 22mm Push uttons and Switches Emergency Stops Selector Switches Lever Type Small Head 71.4 2 positions Large Head 3 positions unit: mm S2ER E3 R A D Size CONTACT LOCK * S2SR S 3 R
More information