PRODUCT: SERIES DESCRIPTION PAGE TRAPS
|
|
- Rosemary Hoover
- 6 years ago
- Views:
Transcription
1 PRICE SHEET HS-113 Effective January 14, 2013 Replaces Price Sheet HS-112 Dated January 30, 2012 These prices are subject to change without notice. All shipments will be billed at the price in effect at the time the order is received at Hoffman Specialty. Orders with requested deliveries beyond normal lead times will be billed at price in effect at time of shipment. Minimum order is $ NET. For complete warranty and detailed terms, refer to our invoice or acknowledgement forms. These prices supersede all other quotations and are subject to change without notice. STANDARD LEADTIME FOR THE PRODUCTS IS 2 WEEKS OR LESS. STANDARD LEADTIME FOR SERVICE PARTS IS 5 DAYS OR LESS. When ordering, specify the Hoffman part number. Failure to do so may delay your order. PRODUCT: SERIES DESCRIPTION PAGE TRAPS 8C, 9C, 17C Thermostatic Traps 2 H Float & Thermostatic Traps 3 C & X Float & Thermostatic Traps 3 I Float & Thermostatic Traps 3 B Inverted Bucket Traps 4-7 TD6520, TD6420 Thermodisc Traps 7 REGULATORS 754 Self-Contained Pressure Regulators Press./Temp. Regulators & Pilots & 1141 Temperature Regulators Tempering Valves 16 VACUUM BREAKERS, VENTS & MISC. 62 Vacuum Breakers Drain Valves 16 1,3,4,40,70,508 Steam s ,790,508,550, 792 Water s Supply Valves Y s 19 SERVICE PARTS: SERIES DESCRIPTION PAGE TRAPS C, H, I, X & 50 Float & Thermostatic Traps C, 9C, 17C, & K Thermostatic Traps 22 B & 600 Inverted Bucket Traps Thermodisc Traps 24 REGULATORS 2000 Press./Temp. Regulators & Pilots Self-Contained Pressure Regulators Temperature Regulators Tempering Valves 28 VACUUM BREAKERS, VENTS & MISC. 62 Vacuum Breaker , 78, 792 Water s / Drain Valves Y s Supply Valves 29 1
2 THERMOSTATIC STEAM TRAPS Series 8C, 9C, 17C SIZE 1/ Description Angle Angle Short Nipple Straightaway Vertical Swivel 17C-2 17C-2 17C-2 17C-2 Press rating Part No List Price No. pieces/ctn Wt./Ctn. Lbs./(kg) 37 (17) 37 (17) 34 (16) 45 (21) 8C-A Press rating 125 Part No List Price No. pieces/ctn. 30 Wt./Ctn. Lbs./(kg) 45 (21) 17C-3 17C-3 Press rating Part No List Price No. pieces/ctn Wt./Ctn. Lbs./(kg) 27 (13) 31 (14) 8C-A C-S Press rating Part No List Price No. pieces/ctn Wt./Ctn. Lbs./(kg) 27 (13) 31 (16) 17C-4 Press rating 25 Part No List Price No. pieces/ctn. 15 Wt./Ctn. Lbs./(kg) 35 (16) 9C-A Press rating 125 Part No List Price No. pieces/ctn. 15 Wt./Ctn. Lbs./(kg) 35 (16) 2
3 FLOAT & THERMOSTATIC TRAPS Series H, I, C, X Series H I C 1-1/4" 1-1/ 1-1/4" 1-1/4" 1-1/ 2-1/ X Seat Differential Rating FT015H-3 FT030H-3 FT075H-3 FT125H-3 FT175H Part No List Price 11.7 (5.3) 11.7 (5.3) 11.7 (5.3) 11.7 (5.3) 11.7 (5.3) Wt/Ctn. Lbs (kg) FT015H-4 FT030H-4 FT075H-4 FT125H-4 FT175H (5.3) 11.7 (5.3) 11.7 (5.3) 11.7 (5.3) 11.7 (5.3) FT015H-5 FT030H (5.3) 11.7 (5.3) FT015H-6 FT030H (10) 22 (10) FT015H (17) FT015I-3 FT030I-3 FT075I-3 FT125I-3 FT175I (5.3) 11.7 (5.3) 11.7 (5.3) 11.7 (5.3) 11.7 (5.3) FT015I-4 FT030I-4 FT075I-4 FT125I-4 FT175I (5.3) 11.7 (5.3) 11.7 (5.3) 11.7 (5.3) 11.7 (5.3) FT015I-6 FT030I-6 FT075I-6 FT125I-6 FT175I (5.3) 11.7 (5.3) 11.7 (5.3) 11.7 (5.3) 11.7 (5.3) FT075C-5 FT125C-5 FT175C (8) 18 (8) 18 (8) FT015C-6 FT030C-6 FT075C-6 FT125C-6 FT175C (8) 18 (8) 18 (8) 18 (8) 18 (8) FT015C-8 FT030C-8 FT075C-8 FT125C-8 FT175C (15) 33 (15) 33 (15) 33 (15) 33 (15) FT015C-10 FT030C-10 FT075C-10 FT125C-10 FT175C (80) 175 (80) 175 (80) 175 (80) 175 (80) FT015X-8 FT030X-8 FT075X-8 FT125X-8 FT175X (49) 108 (49) 108 (49) 108 (49) 108 (49) 3
4 INVERTED BUCKET STEAM TRAPS Series B0 ½ ¾ Equipped Seat Differential Rating B0020A-2 B0080A-2 B0125A-2 B0150A Part No List Price 7 (3) 7 (3) 7 (3) 7 (3) Wt/Ctn. Lbs (kg) B0020S-2 B0080S-2 B0125S-2 B0150S (3) 7 (3) 7 (3) 7 (3) B0020A-3 B0080A-3 B0125A-3 B0150A (3) 7 (3) 7 (3) 7 (3) B0020S-3 B0080S-3 B0125S-3 B0150S (3) 7 (3) 7 (3) 7 (3) INVERTED BUCKET STEAM TRAPS Series B1 1/ Equipped Thermic Thermic Seat Differential Rating B1015A-2 B1030A-2 B1075A-2 B1125A-2 B1180A-2 B1250A (5) 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) B1015S-2 B1030S-2 B1075S-2 B1125S-2 B1180S-2 B1250S (5) 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) B1015T-2 B1030T-2 B1075T-2 B1125T-2 B1180T-2 B1250T (5) 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) B1015B-2 B1030B-2 B1075B-2 B1125B-2 B1180B-2 B1250B (5) 11 (50 11 (5) 11 (5) 11 (5) 11 (5) B1015A-3 B1030A-3 B1075A-3 B1125A-3 B1180A-3 B1250A (5) 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) B1015S-3 B1030S-3 B1075S-3 B1125S-3 B1180S-3 B1250S (5) 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) B1015T-3 B1030T-3 B1075T-3 B1125T-3 B1180T-3 B1250T (5) 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) B1015B-3 B1030B-3 B1075B-3 B1125B-3 B1180B-3 B1250B (5) 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) 4
5 INVERTED BUCKET STEAM TRAPS Series B2 ¾ Equipped Thermic Seat Differential Rating B2015A-3 B2030A-3 B2075A-3 B2125A-3 B2180A-3 B2250A (5.7) 12.5 (5.7) 12.5 (5.7) 12.5 (5.7) 12.5 (5.7) 12.5 (5.7) B2015S-3 B2030S-3 B2075S-3 B2125S-3 B2180S-3 B2250S (5.7) 12.5 (5.7) 12.5 (5.7) 12.5 (5.7) 12.5 (5.7) 12.5 (5.7) B2015T-3 B2030T-3 B2075T-3 B2125T-3 B2180T-3 B2250T (5.7) 12.5 (5.7) 12.5 (5.7) 12.5 (5.7) 12.5 (5.7) 12.5 (5.7) B2015B-3 B2030B-3 B2075B-3 B2125B-3 B2180B-3 B2250B (5.7) 12.5 (5.7) 12.5 (5.7) 12.5 (5.7) 12.5 (5.7) 12.5 (5.7) INVERTED BUCKET STEAM TRAPS Series B3 ¾" Equipped Thermic Thermic Seat Differential Rating B3015A-3 B3030A-3 B3075A-3 B3125A-3 B3180A-3 B3250A (16) 35 (16) 35 (16) 35 (16) 35 (16) 35 (16) B3015S-3 B3030S-3 B3075S-3 B3125S-3 B3180S-3 B3250S (16) 35 (16) 35 (16) 35 (16) 35 (16) 35 (16) B3015T-3 B3030T-3 B3075T-3 B3125T-3 B3180T-3 B3250T (16) 35 (16) 35 (16) 35 (16) 35 (16) 35 (16) B3015B-3 B3030B-3 B3075B-3 B3125B-3 B3180B-3 B3250B (16) 35 (16) 35 (16) 35 (16) 35 (16) 35 (16) B3015A-4 B3030A-4 B3075A-4 B3125A-4 B3180A-4 B3250A (16) 35 (16) 35 (16) 35 (16) 35 (16) 35 (16) B3015S-4 B3030S-4 B3075S-4 B3125S-4 B3180S-4 B3250S (16) 35 (16) 35 (16) 35 (16) 35 (16) 35 (16) B3015T-4 B3030T-4 B3075T-4 B3125T-4 B3180T-4 B3250T (5) 11 (50 11 (5) 11 (5) 11 (5) 11 (5) B3015B-4 B3030B-4 B3075B-4 B3125B-4 B3180B-4 B3250B (16) 35 (16) 35 (16) 35 (16) 35 (16) 35 (16) 5
6 INVERTED BUCKET STEAM TRAPS Series B4 1-1/4" 1-1/ Equipped Thermic Thermic Thermic Seat Differential Rating B4015A-4 B4030A-4 B4075A-4 B43125A-4 B4180A-4 B4250A B4015S-4 B4030S-4 B4075S-4 B4125S-4 B4180S-4 B4250S B4015T-4 B4030T-4 B4075T-4 B4125T-4 B4180T-4 B4250T B4015B-4 B4030B-4 B4075B-4 B4125B-4 B4180B-4 B4250B B4015A-5 B4030A-5 B4075A-5 B43125A-5 B4180A-5 B4250A B4015S-5 B4030S-5 B4075S-5 B4125S-5 B4180S-5 B4250S B4015T-5 B4030T-5 B4075T-5 B4125T-5 B4180T-5 B4250T B4015B-5 B4030B-5 B4075B-5 B4125B-5 B4180B-5 B4250B B4015A-6 B4030A-6 B4075A-6 B43125A-6 B4180A-6 B4250A B4015S-6 B4030S-6 B4075S-6 B4125S-6 B4180S-6 B4250S B4015T-6 B4030T-6 B4075T-6 B4125T-6 B4180T-6 B4250T B4015B-6 B4030B-46 B4075B-46 B4125B-6 B4180B-6 B4250B
7 INVERTED BUCKET STEAM TRAPS Series B6 1-1/ Equipped Seat Differential Rating B6025A-6 B6040A-6 B6125A-6 B6250A Part No List Price 82 (37) 82 (37) 82 (37) 82 (37) Wt/Ctn. Lbs (kg) B6025A-8 B6040A-8 B6125A-8 B6250A (37) 82 (37) 82 (37) 82 (37) THERMODISC STEAM TRAPS 3/8" 1/ Non- TD6523 TD Part No List Price 0.8 (.4) 2.4 (1.1) Wt/Ctn. Lbs (kg) TD6524 TD (.6) 2.4 (1.1) TD6526 TD (1.0) 2.7 (1.2) TD6528 TD (1.4) 3.3 (1.5) SELF-CONTAINED PRESSURE REGULATOR - Series 754 VALVE SIZE OUTLET PRESSURE RANGE (psig) / Part No List Price 8 (3.6) 8 (3.6) 8 (3.6) Wt/Ctn. Lbs. (kg) (3.6) 8 (3.6) 8 (3.6) (8.2) 18 (8.2) 18 (8.2) 18 (8.2) 7
8 SERIES 1141 THERMOSTATIC TEMPERATURE REGULATOR COMPLETE ASSEMBLY 10 Ft. (3m) Capillary Length Body Code 05R with 5/8"x 1 Bulb 1-1/4" 1-1/ Temperature Range - F ( C) (49 71) (60 82) (71 93) (82 104) Part No List Price 13 (5.9) 13 (5.9) 13 (5.9) 13 (5.9) Wt./Ctn. Lbs (kg) (6.8) 15 (6.8) 15 (6.8) 15 (6.8) (7.3) 16 (7.3) 16 (7.3) 16 (7.3) (8.6) 19 (8.6) 19 (8.6) 19 (8.6) (11.4) 25 (11.4) 25 (11.4) 25 (11.4) TEMPERING VALVES - Series 21 No H 21LT Temp Range F (60 93 C) F (38 60 C) F (38 93 C) 1-1/4" 1-1/ Part No List Price 3 (1.4) 3 (1.4) 6 (2.7) 7 (3.2) 9 (4.1) Wt/Ctn. Lbs. (kg) (1.4) 3 (1.4) 6 (2.7) 7 (3.2) 9 (4.1) (1.6) 3.5 (1.6) 6.5 (2.9) 7.5 (3.4) 9.5 (4.3) VACUUM BREAKER DRAIN VALVES M M Inlet Max. Operating Press. 150 Operating Press Rating 150 Max Operating Temp. 366 F (186 C) Max Press Rating 150 Part No Part No List Price List Price No. Pieces / Carton 100 Wt./Ctn. Lbs./(kg) 7 (3.2) Wt./Ctn. Lbs./(kg) 43 (19.5) 793 Operating Press Rating 250 Max Press Rating 250 Part No List Price Wt./Ctn. Lbs./(kg) 7 (3.2) 16
9 STEAM VENTS R A D I A T O R C O N V E C T O R V E N T S S P E C I A L DESCRIPTION 1/8" M 1/4" M 1/ F X M 1A 74 Operating Press Rating 1-1/2 35 Max Press Rating Part No List Price No. pieces/ctn Wt./Ctn. Lbs./(kg) 37 (16.5) 46 (21) 40 Operating Press Rating 6 Max Press Rating 10 Part No List Price No. pieces/ctn. 144 Wt./Ctn. Lbs./(kg) 24 (11) 70A Operating Press Rating 11 Max Press Rating 15 Part No List Price No. pieces/ctn. 144 Wt./Ctn. Lbs./(kg) 27 (12.3) 1B Operating Press Rating 1-1/2 Max Press Rating 10 Part No List Price No. pieces/ctn. 144 Wt./Ctn. Lbs./(kg) 48 (22) Operating Press Rating Max Press Rating Part No List Price No. pieces/ctn Wt./Ctn. Lbs./(kg) 34 (15.5) 35 (16) 54 (24.5) 71A 71B 71C Operating Press Rating Max Press Rating Part No List Price No. pieces/ctn Wt./Ctn. Lbs./(kg) 40 (18.3) 40 (18.3) 40 (18.3) 508 Operating Press Rating 15 Max Press Rating 15 Part No List Price No. pieces/ctn. 25 Wt./Ctn. Lbs./(kg) 2 (4) 3 4 Operating Press Rating Max Press Rating Part No List Price No. pieces/ctn Wt./Ctn. Lbs./(kg) 59 (27) 33 (15) 17
10 STEAM VENTS - continued M A I N V E N T S DESCRIPTION 1/8" M 1/4" M 1/ F X M 4A Operating Press Rating 2 Max Press Rating 10 Part No List Price No. pieces/ctn. 144 Wt./Ctn. Lbs./(kg) 44 (20) 75 Operating Press Rating 3 Max Press Rating 15 Part No List Price No. pieces/ctn. 48 Wt./Ctn. Lbs./(kg) 48 (22) 75H Operating Press Rating 10 Max Press Rating 15 Part No List Price No. pieces/ctn. 48 Wt./Ctn. Lbs./(kg) 48 (22) 76 Operating Press Rating 3 Max Press Rating 15 Part No List Price No. pieces/ctn. 40 Wt./Ctn. Lbs./(kg) 43 (19.5) WATER VENTS R A D I A T O R C O N V. M A I N DESCRIPTION 1/8" M 1/4" M 18 M 1/ F X M 77 Operating Press Rating 50 Max Press Rating 50 Part No List Price No. pieces/ctn. 144 Wt./Ctn. Lbs./(kg) 26 (12) 508 Operating Press Rating 50 Max Press Rating 50 Part No List Price No. pieces/ctn. 25 Wt./Ctn. Lbs./(kg) 2 (4) Operating Press Rating Max Press Rating Part No List Price No. pieces/ctn Wt./Ctn. Lbs./(kg) 30 (13.6) 31 (14) Operating Press Rating Max Press Rating Part No List Price No. pieces/ctn Wt./Ctn. Lbs./(kg) 45 (20.5) 7 (3.2) 41 (18.6) 46 (21)
11 SUPPLY VALVES - Series 180 No. 185C PATTERN Angle 185C Straightaway 1/ 1-1/4 1-1/ Part No List Price No. pieces/ctn. 15 (7) 19 (8.6) 28 (13) 37 (17) 42 (19) 35 (16) Wt/Ctn. Lbs. (kg) HS_ (10) 22 (10) 43 (20) 25 (12) 32 (15) 32 (15) Y STRAINERS - Screwed Ends No. 415C Ends 420C Ends No. 450C 125# Flange 460B 250# Flange 460A 250# Flange Material Cast Iron Cast Brass Material Cast Iron Cast Iron Cast Iron 1/ 1' 1-1/4 1-1/ 2-1/ 3" (.9) 2 (.9) 3 (1.4) 6 (2.7) 7 (3.2) 12 (5.4) 19 (8.6) 32 (14.5) (.5) 2 (.9) 4 (1.8) 5 (2.3) 7 (3.2) 12 (5.4) 22 (10) 35 (16) 2-1/ (65) Y STRAINERS - Flanged Ends FLANGED END SIZE - in. (mm) 3" 4" 5" 6" (80) (100) (125) (150) 8" (200) Part No List Price 33 (15) (21) (36) 109 (49) 152 (69) 250 (113) Wt/Ctn. Lbs. (kg) (21) 70 (32) (45) 150 (68) 210 (95) 350 (159) 19
12 SERVICE PARTS - Series C, H, I, X & 50 Hoffman Parts For No. Pcs. Wt/Ctn. List Description Part No. In. (mm) /Carton Lbs. (kg) Price Gasket Multipack H & I pattern 3/4 1-1/4 (Also fits B1 & B2) 10 2 (1) $ Cover Gasket H & I pattern 3/4 1-1/4 (Also fits B1 &B2) 1.4 (.2) Cover Gasket 1-1/2 FT1015H & 1-1/2 55,550,551, 1.3 (.2) & 1-1/4 592, Cover Gasket C pattern 1-1/4 & 1-1/2 1.4 (.2) Cover Gasket C Units -2 & 550, 551, 552, 1 & (.5) Cover Gasket C Units -2-1/2 & 590, 591, 592, & /2 1 1 (.5) Cover Gasket X Units - 2 & 590, 591, 592, & (.5) Thermostatic element All 15 psig units except 2-1/2 C 1 1 (.5) Thermostatic element All 30 thru 175 psig units & 15 psig 2-1/2 X 1 2 (1) Svc. Pkg. Cover Assemblies. FT015H 3/4 & (1.5) Svc. Pkg. Cover Assemblies. FT015H 1-1/ (1.5) Svc. Pkg. Cover Assemblies. FT015H & /2 1 8 (4) Svc. Pkg. Cover Assemblies. FT015H & (5) Svc. Pkg. Cover Assemblies. FT030H 3/4 & (1.5) Svc. Pkg. Cover Assemblies. FT030H 1-1/ (1.5) Svc. Pkg. Cover Assemblies. FT030H & /2 1 8 (4) Svc. Pkg. Cover Assemblies. FT075H 3/4 & (1.5) Svc. Pkg. Cover Assemblies. FT125H 3/4 & (1.5) Svc. Pkg. Cover Assemblies. FT175H 3/4 & (1.5) Svc. Pkg. Cover Assemblies. FT075C 1-1/4 1 6 (3) Svc. Pkg. Cover Assemblies. FT125C 1-1/4 1 6 (3) Svc. Pkg. Cover Assemblies. FT175C 1-1/4 1 6 (3) Svc. Pkg. Cover Assemblies. FT015C 1-1/2 1 6 (3) Svc. Pkg. Cover Assemblies. FT030C 1-1/2 1 6 (3) Svc. Pkg. Cover Assemblies. FT075C 1-1/2 1 6 (3) Svc. Pkg. Cover Assemblies. FT125C 1-1/2 1 6 (3) Svc. Pkg. Cover Assemblies. FT175C 1-1/2 1 6 (3) Float Lvr. & Valve Assemblies. FT015H & I, 3/4 & 1 & FT030H & FT030I, 1-1/4 1 1 (.5) Float Lvr. & Valve Assemblies. FT015H 1-1/4 & FT015I 1-1/4 1 1 (.5) Float Lvr. & Valve Assemblies FT015H & /2 1.3 (.2) Float Lvr. & Valve Assemblies. FT015H & (.6) Float Lvr. & Valve Assemblies. FT030H & /2 1.3 (.2) Float Lvr. & Valve Assemblies. FT030H 3/4 & 1 & FT030I 3/4 & (.5) FT075H & I, 3/4 & 1 & FT075I Float Lvr. & Valve Assemblies. 3/4, 1, & 1-1/4 1 1 (.5) Float Lvr. & Valve Assemblies. FT125H & I, 3/4 & (.5) Float Lvr. & Valve Assemblies. FT175H & I, 3/4 & 1 FT175I 3/4, 1, & 1-1/4 1 1 (.5) Float Lvr. & Valve Assemblies. FT015C 1-1/2 1 1 (.5) Float Lvr. & Valve Assemblies. FT030C 1-1/2 1 1 (.5) Float Lvr. & Valve Assemblies. FT075C 1-1/4 & 1-1/2 1 1 (.5) Float Lvr. & Valve Assemblies. FT125C 1-1/4 &1-1/2 1 1 (.5) Float Lvr. & Valve Assemblies. FT175C 1-1/4 & 1-1/2 1 1 (.5) Float Ball Assemblies. H & I (See Catalog HS-800) 1.3 (.2) Float Ball Assemblies. 2 (See Catalog HS-800) 1.3 (.2) Float Ball Assemblies. FT015H-6 & FT030H (.2) Float Ball Assembly FT125I 3/4, 1, & 1-1/4 & X - 2, & 590, 591, 592 & (2) Float Ball Assembly C pattern 1-1/4 & 1-1/2 1 1 (.5) Float Ball Assembly C pattern 2-1/2 1 3 (1.5) Cover Only F&T 2-1/2 C pattern & (23) Cover Only F&T 2 C pattern & (5.6) Cover Only F&T X pattern & (13) Svc. Pkg. Cover Assemblies. FT015I 3/4-1 6 (3) Svc. Pkg. Cover Assemblies. FT015I 1-1/4 1 6 (3)
13 Hoffman Part No. SERVICE PARTS - Series C, H, I, X & 50 (continued) Description Parts For In. (mm) No. Pcs. /Carton Wt/Ctn. Lbs. (kg) List Price Svc. Pkg. Cover Assemblies. FT030I 3/ (3) $ Svc. Pkg. Cover Assemblies. FT030I 1-1/4 1 6 (3) Svc. Pkg. Cover Assemblies. FT075I ALL 1 6 (3) Svc. Pkg. Cover Assemblies. FT125I ALL 1 6 (3) Svc. Pkg. Cover Assemblies. FT175I ALL 1 6 (3) Pin & Seat Kit FT015C (1) Pin & Seat Kit FT015X (2) Pin & Seat Kit FT015C 2-1/ (5) Pin & Seat Kit FT175C & /2 1 3 (1.5) Pin & Seat Kit FT125C & /2 1 3 (1.5) Pin & Seat Kit FT075C & /2 1 3 (1.5) Pin & Seat Kit FT030C & / (1.2) Pin & Seat Kit FT175X & (1.2) Pin & Seat Kit FT125X & (1.2) Pin & Seat Kit FT075X & (1.2) Pin & Seat Kit FT030X & (1) Pin & Seat Kit FT175C & (1) Pin & Seat Kit FT125C & (1) Pin & Seat Kit FT030C & (1) Pin & Seat Kit FT075C & (1) Cover Gasket 2 55 & 1-1/2 552,553,590, (.5) Svc. Pkg. Cover Assemblies. 55 3/4 1 3 (1.5) Svc. Pkg. Cover Assemblies (1.5) Svc. Pkg. Cover Assemblies /4 1 4 (2) Svc. Pkg. Cover Assemblies (1.2) Svc. Pkg. Cover Assemblies /4 1 4 (2) Svc. Pkg. Cover Assemblies /4 1 6 (3) Svc. Pkg. Cover Assemblies (1.2) Svc. Pkg. Cover Assemblies /4 1 4 (2) Svc. Pkg. Cover Assemblies /2 1 8 (4) Svc. Pkg. Cover Assemblies (1.2) Svc. Pkg. Cover Assemblies /4 1 4 (2) Svc. Pkg. Cover Assemblies / (4.5) Svc. Pkg. Cover Assemblies (1.2) Svc. Pkg. Cover Assemblies /2 1 8 (4) Svc. Pkg. Cover Assemblies / (1.2) Svc. Pkg. Cover Assemblies (1.2) Svc. Pkg. Cover Assemblies / (5) Svc. Pkg. Cover Assemblies / (1.2) Svc. Pkg. Cover Assemblies (1.2) Svc. Pkg. Cover Assemblies / (4.5) Svc. Pkg. Cover Assemblies / (1.2) Svc. Pkg. Cover Assemblies (1.2) Svc. Pkg. Cover Assemblies /4 1 4 (2) Svc. Pkg. Cover Assemblies / (1.2) Svc. Pkg. Cover Assemblies (1.2) Svc. Pkg. Cover Assemblies /4 1 4 (2) Float Lvr. & Valve Assemblies / 1.3 (.2) Cover Gasket 3/4 55,590,593, & 1 55, 550, (.2) Cover Gasket 1-1/4 55,550,553, & 1 590, (.2)
14 SERVICE PARTS - THERMOSTATIC TRAPS Hoffman No. Pcs. Wt./Ctn. List Description Parts For Part No. In. Lbs. (kg) Carton Price All Thermostatic Element 17C 1.2 (.1) $ All Thermostatic Element 8C, 9C 1.3 (.2) /2 Dura-stat Replacement Module Dunham Bush (Dunham Bush) 1C & 1E 1.2 (.1) /2 Dura-stat Replacement Module Barnes & Jones (Barnes & Jones) (.1) /2 Dura-stat Replacement Module (Spirax-Sarco / Illinois) Spirax Sarco TB-25, TS-25, H Illinois-1G 1.2 (.1) /2 Dura-stat Replacement Module Warren Webster (Warren Webster) 02H, (.1) /2 Swivel Kit. 17C, 17K 1.8 (.5) /2 Coupling Nut 17C, 17A, 8C, 8H 1.3 (.2) /4 Coupling Nut 8C, 9, 9H, 17C 1.3 (.2) /2 Short Nipple 8, 8C, 8H, 17C, 17K 1.3 (.2) /4 Nipple, 1-5/8 long 8C, 9, 9H, 17C 1.3 (.2) Nipple, 1-11/16 long 9, 9C, 9H, 17C 1.3 (.2) Coupling Nut 9, 9C, 9H, 17C 1.3 (.2) /2 Standard Nipple 17C, 17K 1.3 (.2) /2 Gaskets (Swivel) 17C, 17K 1.3 (.2) /2, 3/4 & 1 Cap 17C 1.3 (.2) /2, 3/4 Cap 8C - 1/2, 3/4 1.3 (.2) Cap 9C 1.3 (.2) All Spanner Wrench 8C, 9C & 17C 1.3 (.2) Hoffman Part No. SERVICE PARTS - INVERTED BUCKET TRAPS - Series B Press. Psi (bar) Description Parts For No. Pcs. /Carton Wt/Ctn. Lbs. (kg) List Price All Cover Gasket, Series B0 B0 1.3 (.2) $ (1.4) Pressure Change Kit B0-20 psi 1.3 (.2) (5.5) Pressure Change Kit B0-80 psi 1.3 (.2) (8.6) Pressure Change Kit B0-125 psi 1.3 (.2) (10.4) Pressure Change Kit B0-150 psi 1.3 (.2) All Bucket Assembly, Series B0 B0 1.3 (.2) All, Series B0 B0-S 1.3 (.2) All Cover Gasket for B1 & B2 (Also fits H & I F&T) All B1 & B2 units 1.4 (.2) All Gasket Multipack For B1 & B2 (Also fits H & I F&T) All B1 & B2 units 10 2 (1) (1.0) Cover Assembly B1015A & B1015S 1 3 (1.5) (1.0) Cover Assemblies - Thermic B1015B & B1015T 1 3 (1.5) (2.1) Cover Assembly B1030A & B1030S 1 3 (1.5) (2.1) Cover Assemblies - Thermic B1030B & B1030T 1 3 (1.5) (5.2) Cover Assembly B1075A & B1075S 1 3 (1.5) (5.2) Cover Assemblies - Thermic B1075B & B1075T 1 3 (1.5) (8.6) Cover Assembly B1125A & B1125S 1 3 (1.5) (8.6) Cover Assemblies - Thermic B1125B & B1125T 1 3 (1.5) (12.4) Cover Assembly B1180A &B1180S 1 3 (1.5) (12.4) Cover Assemblies - Thermic B1180B & B1180T 1 3 (1.5) (17.3) Cover Assembly B1250A & B1250S 1 3 (1.5) (17.3) Cover Assemblies - Thermic B1250B & B1250T 1 3 (1.5) All Bucket Assembly B1---A & BI---S 1.5 (.3) All Bucket Assemblies - Thermic B1---B & B1---T 1.5 (.3) (1.0) Internal Parts B (.3) (2.1) Internal Parts B (.2) Internal Parts B1075 & B (.3) (8.6) Internal Parts B (.3) (12.4) Internal Parts B (.3) (17.3) Internal Parts B (.3) (1.0) Cover Assembly B2015A & B2015S 1 4 (1.8) (1.0) Cover Assembly - Thermic B2015B & B2015T 1 4 (1.8) (2.1) Cover Assembly B2030A & B2030S 1 4 (1.8) (2.1) Cover Assembly - Thermic B2030B & B2030T 1 4 (1.8) (5.2) Cover Assembly B2075A & B2075S 1 4 (1.8) (5.2) Cover Assembly - Thermic B2075B & B2075T 1 4 (1.8) (8.6) Cover Assembly B2125A & B2125S 1 4 (1.8)
Hoffman Specialty Service Parts Catalog PARTS LIST HS-800C
Hoffman Specialty Service Parts Catalog PARTS LIST HS-800C Hoffman Specialty Table of Contents STEAM TRAPS FLOAT AND THERMOSTATIC SERIES PAGE INVERTED BUCKET SERIES PAGE C 6 B0 H B I B X 6 B 6 8 B 6 0
More informationHoffman Specialty General Catalog
Hoffman Specialty General Catalog HS-900G ESP-PLUSTM For computer aided selection of Steam Trap and Regulators, please refer to the Steam Specialty Component Selectors at http://bellgossett.com/selectionsizing-cad-tools/
More informationSTEAM TRAPS. Inverted Bucket Steam Traps (continued) Series B. Dimensions in. (mm)
X X X X X X X X X X X X X X TEMP. PRESS. PRESS OFF TEMP. PRESS. PRESS OFF DATE CODE Hoffman ITT DATE CODE Hoffman ITT STEAM TRAPS Inverted Bucket (continued) 3 Available in sizes 3 4" and 1" NPT and BSPT
More information(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP ST-B1B2 ST-B3 ST-B4 (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP MATERIAL PARTS Cap and Body Valve Seat Valve Gasket Material
More informationA. Provide all HVAC specialties required to complete the installation of all HVAC systems. B. Manufacturers: Refer to individual product item.
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION 23 05 02 PART 1 GENERAL 1.01 DESCRIPTION A. Provide all HVAC specialties required to complete the installation of all HVAC systems.
More informationMercy Hospital of Buffalo Catholic Health System 2 nd Floor Patient Holding Center 3 rd Floor Locker Rooms Shaflucas Architects, PC Project No.
SECTION 23 22 13 STEAM AND CONDENSATE PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification
More informationFT47 SG Iron Ball Float Steam Traps (DN15 to DN50)
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationHOT WATER/STEAM COMPONENTS
Section Page Solenoids, Coils & Related Parts...-2 Heat Exchangers...-5 Pressure Valves (Steam/Water) Auto Pressure Relief...-6 Steam Safety Relief...-6, -7 Vacuum Breakers...-6 Pressure & Temperature
More informationS and SF Series Cast Iron Inverted Bucket Steam Traps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationCNC DISTRIBUTION. ITEM NO Description Quantity
Valves CNC DISTRIBUTION Brass Ball Valves ITEM NO IPS Ball Valve *600# PSI WOG 150 PSI WSP * Heavy Pattern Forged Brass Construction *Full Port For Maximum Flow *Teflon Seats * Teflon Stem Packing * AGA,
More informationTechnical Data TYPE A SERIES AIR ADJUSTED PILOT SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY SD 4011 OPERATING PRINCIPLE
Technical Data SD 4011 SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY 12586-2035 TYPE A SERIES AIR ADJUSTED PILOT PRINTED IN U.S.A. SD 4011/9504 Type A or A83 (wt 6 lb) Type A53 or A 85
More informationSECTION PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY
SECTION 230533 - PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Static pressure
More informationSCA Series Steel Inverted Bucket Steam Traps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSTEAM TRAPS. Float and Thermostatic Steam Traps (continued) Series C and X. Dimensions in. (mm)
STM TRPS loat and Thermostatic (continued) Series and X or large high capacity units s available: Series : 1 1 /4" NPT and SPT 1 1 /2" NPT and SPT 2" NPT and SPT 2 1 /2" NPT Series X: 2" NPT Resistant
More informationGuide Specification SECTION HYDRONIC PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY
SECTION 23 21 16 - HYDRONIC PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Air
More informationPASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017
SECTION 221119 - DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Vacuum breakers. 2. Backflow preventers. 3. Water pressure-reducing valves. 4. Balancing valves.
More informationVacuum Relief Performance Curves
Vacuum Relief Valves Crispin Vacuum Relief Valves Valve Function llows air to enter system when vacuum occurs Prevents air exhaustion during pump start-up Features Cracks open to admit air at.25 PSIG differential
More informationMinuteman Vertical Pumps
Description: Condensate Pumps Type: Vertical Centrifugal Pumps Horsepower: /3 to /2 HP GPM: 0 to 37 PSIG: 0-35 Overview: vertical pumps are the workhorse of the NES pumps product offering. All minuteman
More informationMosherflo-ST, SU, and STX Self-Priming Pumps
Mosherflo-ST, SU, and STX Self-Priming Pumps 8-339-338 pumps@rbmosherco.com Physical Address: 9 FM 7 San Leon, TX 7739 Mailing Address: Drawer - A Dickinson, TX 7739 www.rbmosherco.com ST & SU Parts List
More informationSpirax-Sarco B Series Bucket Traps & Repair Parts
Spirax-Sarco B Series s & Repair B Repair Diagram The optional thermic air vent and optional strainer shown here are not included with the steam traps offered in the ordering table. The thermic air vent
More informationMFP14, MFP14S and MFP14SS Automatic Pumps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationThe PL Series Pressure Air Release Valves. Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger. Crispin.
The PL Series Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger Crispin Since 1905 PL SERIES Functio n Allows air and/or gas to be released from a pressurized liquid system
More informationArmstrong Double Duty 6 Steam Trap/Pump Combination Installation and Maintenance
Armstrong Double Duty 6 Steam Trap/Pump Combination Installation and Maintenance 119 Overview Warning: This bulletin should be used by experienced personnel as a guide to the installation and maintenance
More information* T Temperature-Indicating Dial (Must be field set and calibrated to an actual thermometer)
175/153 Series Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2006 Watson McDaniel Company 175 HEATING 153 COOLING 175 / 153 Screwed Connection
More informationTYPE PC Propeller Condensate Pumps
SHIPPENSBURG PUMP CO. INC. P.O. BOX 279, SHIPPENSBURG, PA 17257 PH 717-532-7321 FAX 717-532-7704 WWW.SHIPCOPUMPS.COM BULLETIN 103 Revised 8/17 TYPE PC Propeller Condensate Pumps with Cast Iron Receivers
More informationETP-5G & ETP-10G ECO-TECH PLUS GAS CONVECTION STEAMER PARTS AND SERVICE MANUAL
ETP-5G & ETP-10G ECO-TECH PLUS GAS CONVECTION STEAMER PARTS AND SERVICE MANUAL EFFECTIVE JANUARY 10, 2018 Superseding All Previous Parts Lists. The Company reserves the right to make substitution in the
More informationSTEAM INJECTION HUMIDIFIER LIVESTEAM. Submittal Drawings
STEAM INJETION HUMIDIFIER LIVESTEAM Submittal Drawings Date: Job Name: ontractor: ontractor or Order No.: Engineer: Agent: Agent P.O. No.: Date Ordered: Date Required: U.S.A. 2207 90th St., Sturtevant,
More informationTYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F
TYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F Temperature Regulation for Batch Process Storage Heaters (Water, Fuel Oil or Chemical) Air Heating TYPE ET14 TEMPERATURE
More informationETP-5E & ETP-10E ECO-TECH PLUS ELECTRIC CONVECTION STEAMER PARTS AND SERVICE MANUAL
ETP-5E & ETP-10E ECO-TECH PLUS ELECTRIC CONVECTION STEAMER PARTS AND SERVICE MANUAL EFFECTIVE JANUARY 10, 2018 Superseding All Previous Parts Lists. The Company reserves the right to make substitution
More informationA. This Section includes the following domestic water piping specialties:
SECTION 221119 - DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following domestic water piping specialties: 1. Backflow preventers. 2. Water pressure-reducing
More informationINSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS 377 Float Cage / 326L & 322L lever Valves TABLE OF CONTENTS Overview... Cover General Information... Cover Operation... 4 Installation...4-6 Maintenance...
More informationInstallation, Operation & Maintenance Instructions
Installation, Operation & Maintenance Instructions 377 Float Cage / 326L & 322L lever Valves TABLE OF CONTENTS Overview... Cover General Information... Cover Operation... 4 Installation...4-6 Maintenance...
More informationList prices are for individual parts See following pages for illustration of parts by number
MODELS 2000, 2030 List prices are for individual parts See following pages for illustration of parts by number DESCRIPTION 1" to 1-1/4" 1-1/2" 2" to 2-1/2" 3" P/N PRICE P/N PRICE P/N PRICE P/N PRICE 1.
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MODEL LT1 DISHWASHER ML-104239 A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 18581 Rev. B (October 2005) Table of Contents 3 CHEMICAL DETECTION BOX 5 CONTROL
More informationWHOLESALER PRICE SHEET
PRICE SHEET WHOLESALER PRICE SHEET WPS-115 Effective January 5, 2015 Replaces Price Sheet WPS-214 Dated February 3, 2014 Minimum Billing: $125.00 These prices supersede all other quotations and are subject
More informationA. This Section includes the following domestic water piping specialties:
Page 221119-1 SECTION 221119 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationReplacement Parts List. Knight Fire Tube Boilers KHB 055 thru 285 Series 100 & _ _Rev B
Replacement Parts List PARTS & SERVICE DEPARTMENT Nashville, Tennessee 877-554-5544 Fax: 615-882-2918 parts_team@lochinvar.com www.lochinvar.com Knight Fire Tube Boilers KHB 055 thru 285 Series 100 & 101
More informationTechnical Data TYPE T124 & T134 TEMPERATURE PILOT SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY SD 4512A
WATTS INDUSTRIES, INC. Technical Data SD 4512A SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY 12586-2035 PRINTED IN U.S.A. SD 4512A/9806 T124/T134 PILOT FRONT VIEW 2 1 /16 F 5 7 /8 2 3
More informationGrey cast iron SG iron Cast steel/ Forged steel High temperature steel Stainless steel Fig. 631 Page 2
CONA S Ball float steam trap Ball float steam trap Ball float steam trap PN16 / PN40 - with flanges (Fig. 631...1) - with screwed sockets (Fig. 631...2) - with socket weld ends (Fig. 631...3) - with butt
More informationPARTS LIST PRESSURELESS COOKER MODELS: GSX-5HE, GSX-7HE, GSX-10HE
PARTS LIST PRESSURELESS COOKER MODELS: 5HE, 7HE, 10HE CROWN FOOD SERVICE EQUIPMENT LTD. 70 OAKDALE ROAD, DOWNSVIEW, (TORONTO), ONTARIO, M3N 1V9 TELEPHONE: (416) 746-2358, FAX: (416) 746-8324 PRINTED IN
More informationRev.2.05 www.cmadishmachines.com Table of Contents EST-44 1. PARTS MANUAL... 3 1.1. Initial Parts Kit... 3 1.2. Exploded View Drawings... 4 1.2.1. Cabinet Assembly... 4 1.2.2. Control Box Assembly... 5
More informationRev.2.06A www.cmadishmachines.com Table of Contents EST-44 1. PARTS MANUAL... 3 1.1. Initial Parts Kit... 3 1.2. Exploded View Drawings... 4 1.2.1. Cabinet Assembly... 4 1.2.2. Control Box Assembly (3
More informationSECTION VALVES PART 1 -GENERAL
SECTION 1571 0 VALVES PART 3- EXECUTION General Shut-off Valves Balancing Valves Drain Valves RELATED WORK Section 15430- Plumbing Specialties Section 15450- Plumbing Equipment PART 1 -GENERAL SCOPE This
More informationIBV Series C-LF2 Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationW91/W94 Series TEMPERATURE REGULATORS. Self-Operated Temperature Regulators. Design & Operation W91 Non-Indicating W94 Dial Thermometer
Design & Operation W91 Non-Indicating W94 Dial Thermometer Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company CAPILLARY
More informationSteam Trapping and Steam Tracing Equipment
Steam Trapping and Steam Tracing Equipment Steam Traps Pay less money for energy and more attention to the environment. It s pretty obvious, really. An efficient steam trap wastes less energy, which means
More informationTHE KEENEY MANUFACTURING COMPANY
Brass Tubular P Traps 1-8 Repair Traps 8-9 S Traps 9-11 Sink Traps 11-15 Bath Traps 15 Washing Machine Traps 16 J Bends 16-17 Sink Trap J Bends 17-18 Wall Bends 19 Floor Tubes 19 Center Outlet Continuous
More informationWHOLESALER PRICE SHEET
PRICE SHEET WHOLESALER PRICE SHEET WPS-1215 Effective December 14, 2015 Replaces Sheet WPS-415 Dated April 20, 2015 Minimum Billing: $125.00 These prices supersede all other quotations and are subject
More informationMueller Gas Products. Mueller Drilling and Stopping Machines. DH5 Drilling and Stopping. o 500 PSIG. o 1200 PSIG
Mueller Gas Products Distributed by: Mountain States Pipe and Supply Colorado Springs, Colorado 80903 1 800 777 7173 Mueller Drilling and Stopping Machines E5 Drilling and Stopping o 500 PSIG EH5 Drilling
More informationCarburetor Kits, Gaskets
Carburetor Kits, Gaskets CARTER W-1 REBUILD KIT ROCHESTER CARB KIT CARTER Y-F REBUILD KIT MANUAL CHOKE. AUTO & MANUAL CHOKE REBUILD KIT FOR YOUR CARBURETOR. MANUAL CHOKE. #5304-1 Contains parts to rebuild
More informationProduct Cross Reference
Product Cross Reference Steam Traps THERMODYNAMIC TRAPS Manufacturer McDaniel Armstrong Spence Nicholson Hoffman Sarco Yarway TLV Desc. Size Product F/F Dim Product F/F Dim Product F/F Dim Product F/F
More informationTEMPERATURE REGULATORS W91/W94 Series
Self-Operated Temperature Regulators Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company Self-Operating Design Indicating
More informationABS-0918 SUPERSEDES ABS-0318 ASTM D2661 R/SEPT ABS DWV FITTINGS.
ABS-0918 SUPERSEDES ABS-0318 ASTM D2661 R/SEPT. 2018 ABS DWV FITTINGS www.bow-group.com COUPLING 1 1/4" 601112 125 9,000 5.63 1 1/2" 601120 125 9,000 3.48 2" 601138 100 4,800 4.65 3" 601146 45 1,440 13.07
More informationVacuum Pumps & Parts. (800) Truck Center of Fort Worth, Inc North Freeway Fort Worth, TX.
RCF500 Rotary Vane Vacuum Pump RCF500 Specifications Approximate Air Flow Maximum Vacuum 320 CFM 28.5 Hg Power Required @ 27 Hg 23 BHP Pressures to 35 PSI Power required @ Max. Pressure 44 BHP Size of
More informationThe SC Series Surge Check Valves Sizes 3 thru 24 Available Cast Iron Construction Limits the Effects of System Surge on Air Release Valves.
The Series Sizes 3 thru 24 Available Cast Iron Construction Limits the Effects of System Surge on Air Release Valves Crispin Since 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick, PA
More informationM21Hi ISO Reduced Bore Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationDO NOT INSULATE BELOW THIS LINE. * For sizes 1/2" to 1 1/2" add 2 1/2" to 'C' dimension.
428 Jones Boulevard Limerick Airport Business Center Pottstown, PA 19464 Phone: (610)495-5131 ax: (610)495-5134 www.watsonmcdaniel.com PAGE 28 INSTRUCTION PART NO. 2315400 C.R.3500 REV. 10 SIZE C B CENTER
More informationDESCRIPTION ACCESSORIES FIELD INSTALLED SPLIT-SYSTEM EVAPORATOR BLOWERS KBBU060, KDBC090, KCBC120 & KCBC180 5 THRU 15 NOMINAL TONS SUPPLY AIR PLENUMS
DESCRIPTION TECHNICAL GUIDE SPLIT-SYSTEM EVAPORATOR BLOWERS KBBU060, KDBC090, KCBC120 & KCBC180 5 THRU 15 NOMINAL TONS These completely assembled units include a well-insulated cabinet, a DX cooling coil
More informationThe Pivotrol Pump Patented Selection and Sizing
How to Select and Size From the inlet pressure, back pressure and filling head conditions given below, select the pump size and check valve package which meets the capacity requirement of the application.
More informationSpirax-Sarco 25MT Temperature Control Valve
State Supply Saint Paul, MN Toll Free: 800.772.2099 Fax: 651.774.7156 www.statesupply.com 25MT Control Valve Select Thermal Actuators with the bulb type, capillary length desired temperature range below.
More information9MP-DJ Powder Feeder HVOF Spraying. Parts List PL EN 06
HVOF Spraying Parts List PL 43354 EN 06 Oerlikon Metco - October 2015 Oerlikon Metco (US) Inc. 1101 Prospect Avenue Westbury NY 11590 +1 516 334 1300 +1 516 338 2414 www.oerlikon.com/metco Spare Parts
More informationSeries 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating VENT 'A' FLOW
Series 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating 1/4" NPT VENT 'A' 1/4" NPT 2 - REQ'D 'D' REQ D FOR BASKET REMOVAL 'B' FLOW 'C'
More informationSpare Parts Catalog. ACE Series Automatic Coffee Brewer: Glass Decanter, Thermal Carafe, Thermal Dispenser, & Thermal Airpot ACE-LP ACE-TC ACE-TD
ACE-LP ACE-S ACE-TC ACE-TD ACE-TS ACE-LD ACE-AP Spare Parts Catalog 18-Oct-18 NEI 1.800.325.7867 www.newcocoffee.com P a g e 1 Flow Control Information for PDS [Legacy (Old Style) - PN: 110305] 18-Oct-18
More informationCrispin Valves Operating Guide. Crispin
Crispin Valves Operating Guide Crispin Since 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick, PA 18603 1-800-AIR-VALV T: (570) 752-4524 F: (570) 752-4962 www.crispinvalve.com sales@crispinvalve.com
More informationABS-C0717 JULY 2017 SUPERSEDES ABS-C0217 CSA B181.1 ABS DWV FITTINGS.
ABS-C0717 JULY 2017 SUPERSEDES ABS-C0217 CSA B181.1 ABS DWV FITTINGS www.bow-group.com dimension item Ctn Skid list price dimension item Ctn Skid list price SANITARY TEE (Hub x Hub x Hub) 1 1/4" 600007
More informationABS-C0219 FEB SUPERSEDES ABS-C0717R CSA B181.1 ABS DWV FITTINGS.
ABS-C0219 FEB. 2019 SUPERSEDES ABS-C0717R CSA B181.1 ABS DWV FITTINGS www.bow-group.com DIMENSION ITEM CTN SKID LIST PRICE DIMENSION ITEM CTN SKID LIST PRICE SANITARY TEE (Hub x Hub x Hub) 1 1/4" 600007
More informationHYDRAULIC CONTROL VALVES
HYDRAULIC CONTROL VALVES The automatic control valves are diaphragm valves designed to provide hydraulically driven solutions to pressure, flow and level control applications. Features: Main valve uses
More informationSECTION FACILITY FUEL OIL PIPING
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Specification Sections, apply to this Section. B. Related Sections:
More informationCASH VALVES TYPE G-4 PRESSURE REGULATORS
A self-actuating pilot operated pressure reducing valve handling air, gas and steam and accurate to within ½% up to 3" and 1% for sizes to 6 FEATURES Extremely compact design enables use of a smaller regulator.
More informationD I V I S I O N O F M A R S H B E L L O F R A M
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
More informationVacuum Breakers. Brass Construction 3/4 MHT Outlet
Vacuum Breakers Brass Construction 3/4 MHT Outlet MASTER ITEM # DESCRIPTION INNER CAR- TON QTY CARTON QTY HPVVBRB 3/4 FHT x 3/4 MHT Rough Brass 20 200 HPVVBCP 3/4 FHT x 3/4 MHT Chrome Plated 20 200 1 Body
More informationUNA 13 UNA 15 UNA 15 Stainless Steel Design. Installation Instructions Steam Traps UNA 13, UNA 15
UNA 13 UNA 15 UNA 15 Stainless Steel Design Installation Instructions 810604-01 Steam Traps UNA 13, UNA 15 1 Contents Important Notes Page Use... 7 Safety note... 7 Danger... 7 Explanatory Notes Scope
More informationPRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES
WATER METERS VALVES & COCKS PRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES FILTER, REGULATOR & LUBRICATORS W IKA V I INSTRUMENTS
More informationThe Filling Procedure
The Filling Procedure Model(s): ECO Series What is needed! 1. Pump 2. 3 water hoses with metric adapters (found on the chiller pump) 3. Glycol (Premixed 37% of KKT Protect) 4. Hand tools 5. Pressure gauge
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS OV300E MINI RACK OVEN ML-132155 OV300E A product of BAXTER MFG. CO., INC. 19220 STATE ROUTE 162 EAST, ORTING, WA 98360 FORM 43051 Rev. C (July 2017) F-43051 Rev. C (July 2017)
More informationInstallation, Operation and Maintenance Manual
Installation, Operation and Maintenance Manual Technical Manual EH 1.2 General Information about valve sizing: Valves with a Full Port have an internal seat diameter that is the same as the nominal pipe
More informationBall Valves. Quality Valves at Low Cost
Ball Valves Quality Valves at Low Cost Table of Contents B Series, 2, 3 PC Ball Valves Part Numbering System...3 B0: 2 PC, 000 WOG, 36SS... 4 B02: 2 PC, 2000/0 WOG, 36SS... 4 B03: 2 PC, 000 WOG, 36SS Direct
More informationTechnical Data P3 PISTON POWER PUMP NON-ELECTRIC CONDENSATE PUMP SD 9952B
Technical Data SD 9952B SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NEW YORK, 12586-2035 P3 PISTON POWER PUMP NON-ELECTRIC CONDENSATE PUMP Pressures To 250 PSIG (20.7 barg) Temperatures
More informationP34AXL Series Parts List
Note: The first P34AXL low-side ammonia units were shipped in late 1997. The original control panel utilized Cutler-Hammer components, but was changed to Allen Bradley in mid 1999. Control Panel Components
More informationSUPERSEDES ABS-C0811/AUG.
ABS-C0612/R JUNE 2012 SUPERSEDES ABS-C0811/AUG. 2011 SANITARY TEE REDUCING TEE TEE - Left Side Inlet 600007 1 1/4" 0 62852 60000 5 50 4,800 15.41 600015 1 1/2" 0 62852 60001 2 90 2,880 8.27 600023 2"
More informationSteam/Water Washdown Units Safety and Operation Installation and Maintenance Instructions
INSTALLATION AND MAINTENANCE INSTRUCTIONS IM-8-002-US October 2016 Steam/Water Washdown Units Safety and Operation Installation and Maintenance Instructions These instructions should be read by the Company
More informationGrey cast iron Fig. 610 Page 2. Forged steel Stainless steel Fig. 610/612 (Y) Page 4
Thermostatic steam trap CONA M Thermostatic steam trap Thermostatic steam trap PN16 - with flanges (Fig. 610...1) - union with butt weld ends (Fig. 610...5) Grey cast iron Fig. 610 Page 2 Thermostatic
More informationAir Line Filtration Accessories. Bulletin /USA. Finite
Air Line Filtration Accessories Bulletin 1300-150/USA Finite Finite s Featured Air Line Filtration Accessories For a comprehensive list and to find out where these accessories are used, please see pages
More informationP95H Regulator Applications P95H Part Matrix Specifi cations Materials of Construction P95H Flow Coeffi cients Wide Open Coeffi cients
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
More informationPT-516 Pumping Trap Installation and Maintenance
PT-516 Pumping Trap Installation and Maintenance IB-104-B This bulletin should be used by experienced personnel as a guide to the installation and maintenance of the PT-516 Pumping Trap or Pumping Trap
More informationSERIES WC & WCS. Watchman Series & WCS Condensate Units. Replacement Parts for. Hoffman PARTS LIST DN0436. Hoffman Pump
Hoffman PARTS LIST DN06 REVISION B Watchman Series WC Cast Iron Receiver Single or Duplex Replacement Parts for Watchman Series WCS Steel Receiver Single or Duplex Watchman Series WC & WCS Condensate Units
More information15100 VALVES. E. Section Building Automation and Control System Guidelines
15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955
More informationCATALOG OF REPLACEMENT PARTS C24GA6 & C24GA10 GAS CONVECTION STEAMERS PRIOR MLS COVERED IN THIS MANUAL
CATALOG OF REPLACEMENT PARTS C24GA6 & C24GA10 GAS CONVECTION STEAMERS C24GA6 C24GA10 ML-136056 ML-136057 PRIOR MLS COVERED IN THIS MANUAL C24GA6 C24GA10 ML-136021 ML-136022 For additional information on
More information1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves.
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
More informationTypes 92CT and 92CTP Temperature Regulators for Steam, Water, and Air
Instruction Manual Form 5630 Types 92CT and 92CT April 2000 Types 92CT and 92CT Temperature Regulators for Steam, Water, and Air W7652 W7651 Figure 1. Type 92CT Temperature Regulator Figure 2. Type 92CT
More informationUS SERIES. Universal Sewer Valves. Universal Sewer Valves. Valve Function. Features Include
Valve Function Exhausts air as a pipeline fills, and allows air in as pipeline drains Allows accumulating air to escape while line is in operation Features Include Standard and short body series available
More informationAPT14 Automatic Pump Trap Installation and Maintenance Instructions
6120250/7 IM-P612-04 ST Issue 7 APT14 Automatic Pump Trap Installation and Maintenance Instructions 1 Product information 2 Operation 3 Installation Closed loop steam systems only 4 Commissioning 5 Maintenance
More information9MPE-DJ-CL20 Powder Feeder HVOF Spraying. Parts List PL EN 06
HVOF Spraying Parts List PL 90265 EN 06 Oerlikon Metco - October 2015 Oerlikon Metco (US) Inc. 1101 Prospect Avenue Westbury NY 11590 +1 516 334 1300 +1 516 338 2414 www.oerlikon.com/metco Spare Parts
More informationSpiratec ST14, ST16 and ST17 Sensor Chambers and Sensors
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSeries CC Condensate Units
Bulletin S-215F Series CC Condensate Units Simplex or Duplex 1,000 thru 15,000 sq. ft. EDR 250 thru 7,500 lb./hr. Cast Iron Receivers: for years of dependable service; warranted for 20 years from date
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 22 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Valves, General 2. Gate Valves 3. Balancing Valves 4. Ball Valves 5. Swing Check Valves 6. Backflow Prevention Assemblies 7. Pressure
More informationPRESSURE REGULATORS PRESSURE REDUCING. APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure
PRESSURE REDUCING APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure PRESSURE RANGE: Upstream: 10 psig to 300 psig Downstream: 10 psig to 300
More informationABS DWV FITTINGS ABS-1116 NOVEMBER 2016 SUPERCEDES ABS-1215 ASTM D2661
ABS DWV FITTINGS ABS-1116 NOVEMBER 2016 SUPERCEDES ABS-1215 ASTM D2661 COUPLING 1 1/4" 601112 125 9,000 3.36 1 1/2" 601120 125 9,000 2.25 2" 601138 100 4,800 3.03 3" 601146 45 1,440 8.49 4" 601153 25 800
More informationwww.cmadishmachines.com Table of Contents CMA-44 1. PARTS MANUAL... 4 1.1. Initial Parts Kit (P/N 13996.81)... 4 1.2. Initial Parts Kit (P/N 13996.80)... 5 1.3. Exploded View Drawings... 6 1.3.1. Cabinet
More information4" PPF-P Pilot-Operated Pressure Powered Pump
INSTALLATION AND MAINTENANCE INSTRUCTIONS IMI 5.220 January 1996 4" PPF-P Pilot-Operated Pressure Powered Pump Operating Pressure Range 25 to 150 psi (1.7 to 10.3 bar) The 4" PPF-P incorporates a spring-loaded,
More information