HYDRAULIC CONTROL VALVES
|
|
- Sybil Gardner
- 5 years ago
- Views:
Transcription
1 HYDRAULIC CONTROL VALVES The automatic control valves are diaphragm valves designed to provide hydraulically driven solutions to pressure, flow and level control applications. Features: Main valve uses globe design for superior control characteristic. Top and Bottom seat rings are used to guide the stem and diaphragm assembly for extended life time and stability. High strength ductile iron body used for lowering the weight and improving long term durability. Stainless steel used for seat and disc retainer ring for corrosion resistance. Easy maintenance without having to remove valve from the main line. Nylon reinforced rubber diaphragm for long term service. Drop tight shut-off capacity. Various pilots and accessories available to offer a large range of control applications. All iron parts are coated inside & outside with fusion bonded epoxy for corrosion resistance per AWWA C0. Meet standards BS EN 07-, ISO 08, BS EN -, BS EN 8-, BS EN 09-. Technical Data: Design Standard: Size Range: Pressure Rating: Working Temperature: DIN / BS DN0 - DN700 0 bar / bar / bar -0 C 80 C End Connection: PN0 / PN / PN / ANSI B. & B. Application: For pressure flow and level control in water applications. HYDRAULIC CONTROL VALVES
2 Main Valve - ( - ) No. Parts Name Materials Standards Body ASTM A Body Seat Stainless Steel ASTM A7 O-Ring Rubber NBR O-Ring Rubber NBR H Hexagon Bolt Stainless Steel ASTM A07 Washer Stainless Steel A 7 Bonnet ASTM A D K DN 7 8 Bushing Brass ASTM B 9 Spring Stainless Steel SS0 0 Nut Stainless Steel A Diaphragm Nylon Reinforced Rubber NBR/EPDM + Nylon Diaphragm Upper Plate ASTM A L 8 N- d Pin Stainless Steel SS0 Disc Holder ASTM A Seal Rubber NBR/EPDM Seat Retainer Stainless Steel 7 Stem Stainless Steel 8 Plug Stainless Steel 9 Cap Carbon Steel ASTM A7 ASTM A7 ASTM A7 ASTM A7 Size Main Dimension (mm) NPS DN L H PN0 PN PN Weight (kg) Ød ØK N-Ød Ød ØK N-Ød Ød ØK N-Ød " ¹/₂" " " " " " " " Flow way dimension for DN0 is the same as DN00. HYDRAULIC CONTROL VALVES
3 Main Valve ( - 8 ) No. Parts Name Materials Standards 9 9 Body ASTM A Body Seat Brass / Bronze ASTM B H O-Ring Rubber NBR Screw Stainless Steel A Screw Stainless Steel A Spring Stainless Steel A 7 Bonnet ASTM A 7 8 Guide Brass / Bronze ASTM B D K DN 9 Stem Nut Stainless Steel / Bronze ASTM A7 / ASTM B 0 Fix Washer Stainless Steel / Bronze Eyebolts Carbon Steel ASTM A7 / ASTM B ASTM A7 N- d L 8 Diaphragm Nylon Reinforced Rubber NBR/EPDM + Nylon Fix Holder ASTM A Disc Holder ASTM A Gasket Rubber EPDM Seat Retainer ASTM A 7 Stem Stainless Steel 8 Plug Stainless Steel 9 Cap Carbon Steel ASTM A7 ASTM A7 ASTM A7 Size Main Dimension (mm) NPS DN L H PN0 PN PN Weight (kg) Ød ØK N-Ød Ød ØK N-Ød Ød ØK N-Ød " " " " " Flow way dimension for DN0 is the same as DN00 Flow way dimension for DN700 is the same as DN00 HYDRAULIC CONTROL VALVES
4 P00 - Float Pilot ZG/ No. Parts Name Materials Standards Body Stainless Steel SS0 Disc Stainless Steel + Rubber SS0 + NBR Yoke Stainless Steel SS0 7 Rod Stainless Steel SS0 Nut Stainless Steel A Float Stainless Steel SS0 7 Jam Nut Stainless Steel SS0 P0B - Bi-Level Float Pilot No. Parts Name Materials Standards Cover Stainless Steel SS0 Stem Stainless Steel SS0 Seal Rubber EPDM Body Stainless Steel SS0 Base Plate Stainless Steel SS0 Level Stainless Steel SS0 7 Level Stainless Steel SS0 8 Hod Stainless Steel SS0 9 Stop Collar Stainless Steel SS0 0 Float Stainless Steel SS0 Hod Stainless Steel SS0 Weight Stainless Steel SS0 HYDRAULIC CONTROL VALVES
5 P00 - Reducing Pilot No. Materials Standards Cap Plastic ABS Adjusting Screw Stainless Steel A Jam Nut Stainless Steel A Spring Guide Stainless Steel SS0 Bonnet Stainless Steel SS0 Spring Steel Cr-VA 7 Nut Stainless Steel A 8 Spring Washer Stainless Steel A 9 Fixing Holder Stainless Steel SS0 0 Screw Stainless Steel A Diaphragm Rubber + Reinforced Nyon EPDM + Nylon Yoke Stainless Steel SS0 Body Stainless Steel SS0 Disc Stainless Steel + Rubber SS0 + EPDM O-Ring Rubber NBR Plug Stainless Steel SS0 SETTING RANGE:. 0.~0 Bar..0~ Bar..0~ Bar 7 Stem Stainless Steel SS0 8 Plug Stainless Steel SS0 9 Cap Carbon Steel 0 P0C - Reducing Pilot + Chamber No. Materials Standards Cap Plastic ABS Adjusting Screw Stainless Steel A Jam Nut Stainless Steel A Spring Guide Stainless Steel SS0 Bonnet Stainless Steel SS0 Spring Steel Cr-VA 7 Nut Stainless Steel A 8 Spring Washer Stainless Steel A 9 Fixing Holder Stainless Steel SS0 0 Screw Stainless Steel A Diaphragm Rubber+ Reinforced Nylon EPDM + Nylon Stem Stainless Steel SS0 Chamber Stainless Steel SS0 Yoke Stainless Steel SS0 Body Stainless Steel SS0 Disc Stainless Steel + Rubber SS0 + EPDM 7 O-Ring Rubber NBR 8 Plug Stainless Steel SS0 9 Cap Carbon Steel 0 SETTING RANGE:. 0.~0 Bar..0~ Bar..0~ Bar HYDRAULIC CONTROL VALVES
6 P00 - Relief/Sustaining Pilot SETTING RANGE:. 0.~0 Bar..0~ Bar..0~ Bar No. Parts Name Materials Standards Cap Plastic ABS Adjusting Screw Stainless Steel SS0 Jam Nut Stainless Steel A Spring Guide Stainless Steel SS0 Bonnet Stainless Steel SS0 Spring Steel Cr-VA 7 Nut Stainless Steel A 8 Spring Washer Stainless Steel A 9 Fix Holder Stainless Steel SS0 0 Screw Stainless Steel A Diaphragm Rubber + Reinforced Nyon EPDM + Nylon Washer Stainless Steel SS0 O-Ring Rubber NBR Chamber Stainless Steel SS0 O-Ring Rubber NBR O-Ring Rubber NBR 7 Stem Stainless Steel SS0 8 Disc SS0 + EPDM 9 Body Stainless Steel SS0 No. Parts Name Materials Standards Cap Plastic ABS Adjusting Screw Stainless Steel SS0 Jam Nut Stainless Steel A Spring Guide Stainless Steel SS0 Bonnet Stainless Steel SS0 Spring Steel Cr-VA 7 Nut Stainless Steel A 8 Spring Washer Stainless Steel A 9 Fixing Holder Stainless Steel SS0 0 Screw Stainless Steel A Diaphragm Rubber + Reinforced Nyon EPDM + Nylon Washer Stainless Steel SS0 O-Ring Rubber NBR Chamber Stainless Steel SS0 O-Ring Rubber NBR O-Ring Rubber NBR 7 Stem Stainless Steel SS0 8 Disc Stainless Steel + Rubber SS0 + EPDM 9 Body Stainless Steel SS0 SETTING RANGE:. ~ Bar HYDRAULIC CONTROL VALVES
7 A00 - Remote Float Control Valve. Main Valve. Needel Valve. Ball Valve. P00. Strainer A00 Flexible Joint. Maintains a constant water level; the float pilot will shut off and close the main valve.. The remote float pilot will automatically close when the water level rises to defined level, and opens when water level drops. A0B - Bi-Level Float Control Valve. Main Valve. Restriction. Ball Valve. Bi-level Float Pilot. Strainer. On-Off control. Upper stop - closed tight when the water level reaches high water level.. Lower stop - start to open when the water level drop below a pre-set level.. Controls the water level in the tank and can be adjusted thru the rod stop. HYDRAULIC CONTROL VALVES 7
8 A00 - Remote Reducing Valve. Main Valve. Needle Valve. P00. Ball Valve. Inlet Pressure Gauge (Optional). Outlet Pressure Gauge (Optional) 7. Strainer 7 A00. Reduces the higher upstream pressure and keep the downstream pressure as per the pilot setting (adjustable).. Independent of the downstream variations of flow or pressure. A0 - Pressure Sustaining/Reducing Valve. Main Valve. Needle Valve. P00. P00. Ball Valve. Inlet Pressure Gauge (Optional) 7. Outlet Pressure Gauge (Optional) 8. Strainer 7 8 Main A0. Reduces the higher upstream pressure and keep the downstream pressure as per the pilot setting (adjustable).. Independent of the downstream variations of flow or pressure.. The sustaining pilot keeps the upstream pressure above the pilot setting to prevent drop of the inlet pressure below the set point. HYDRAULIC CONTROL VALVES 8
9 AA - Surge Anticipation Valve. Main Valve. Needle Valve. P00. P0C. Ball Valve. Inlet Pressure Gauge (Optional) 7. Strainer 7 Main. The purpose of P0C is to open at low pressure for a rapid relief of high pressure wave.. The pre-open function eliminates the surge during pump abrupt stoppage.. The valve releases excessive system pressure. AA A00 - Slow Opening / Closing Valve. Main Valve. Ball Valve A00. Performs the same function as a check valve.. The valve opens when inlet pressure exceeds outlet pressure and close in case of pressure reversal.. Closing speed can be adjusted with the small valve. HYDRAULIC CONTROL VALVES 9
10 A00 - Flow Control Valve. Main Valve. Needle Valve. P00. Ball Valve. Orifice Kit. Strainer A00. Maintains a constant flow, regardless of fluctuations of system pressure.. The rate of flow pilot can be flexible, and senses the pressure differential across an orifice plate mounted in the valve outlet flange.. When the level of system pressure changes, the flow pilot responds and modulates the main valve to maintain the desired flow. A00 - Pressure Relief / Sustaining Valve. Main Valve. Needle Valve. P00. Ball Valve. Inlet Pressure Gauge (Optional). Strainer Main A00. Relief: if the system pressure exceeds the preset of the pilot, the valve will immediately open to release excess pressure, and keep the system within safe operating parameters.. Sustaining: prevents upstream pressure (mainline) from dropping below the preset pressure. HYDRAULIC CONTROL VALVES 0
11 A00 - Solenoid Control Valve. Main Valve. Needle Valve. Solenoid Valve. Ball Valve. Strainer. -way solenoid-energized to open the valve.. -way solenoid-de-energized to close the valve.. -way solenoid for special service conditions can be consulted. A00 A800 - Pressure Differential Valve. Main Valve. Needle Valve. P800. Ball Valve. Inlet Pressure Gauge (Optional). Outlet Pressure Gauge (Optional) 7. Strainer 7 HVAC system Supply Return A800 Function: The main valve will automatically open against the system pressure if the differential exceeds the pilot setting (adjustable). HYDRAULIC CONTROL VALVES
12 Head Loss Curve DN Cavitation Head Loss(Bar) Flow Rate(m/h) 0000 VT -XX - A900- XX - XXX Size - 8 SPECIAL CODES Please consult us A00 A00 A00 A00 A00 A00 A800 A900 TYPE Remote Float Valve Pressure Reducing Valve Slow Opening/Closing Valve Flow Control Valve Pressure Relief/Sustaining Valve Electrical Control Valve Pressure Differential Sustaining Valve Main Valve FLANGES A Class FF A Class 0 RF 0 PN0 PN PN VAHN-TECH Internat ional Inc , Blue Jays Way, Toronto, Ontario, MV 0L7, Canada Tel.: info@vahn-tech.com HYDRAULIC CONTROL VALVES
T he -A900 series of automatic control valves
A900 Automatic Control Valve T he -A900 series of automatic control valves are Basic Valves to provide hydraulically driven solutions to pressure, fl ow and level control applications. Features: Top and
More informationT he -A900 series of automatic control
A00 Automatic Control Valve T he -A00 series of automatic control valves are Basic Valves to provide hydraulically driven solutions to pressure, flow and level control applications. Features: Top and seat
More informationAWWA C504 - BUTTERFLY VALVES
License Number 6D-1724 AWWA C504 - BUTTRFLY VALVS License Number 6D-1724. Gate Valves Knife Gate Valves Ball Valves Check Valves Plug Valves Air Release Valves Oil and Gas Water and Sewage, Chemicals Paper
More informationBERMAD Waterworks. Pressure Relief/Sustaining Valve. Model: WW Series. Features and Benefits. Major Additional Features
Pressure Relief/Sustaining Valve Prioritizing pressure zones Ensuring controlled pipeline fill-up Preventing pipeline emptying Pump overload & cavitation protection Safeguarding pump minimum flow Excessive
More informationPRESSURE REDUCING CONTROL VALVE
PRESSURE REDUCING CONTROL VALVE 06/08 Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) X P/L Standard Components 1 Main
More informationPRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING VALVE with LOW-FLOW BY-PASS FEATURE Main Line valve
More informationPRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING VALVE with LOW-FLOW BY-PASS FEATURE Main Line valve
More informationMustang Series PRESSURE REDUCING CONTROL VALVE. M115 (Globe) M1115 (Angle) Schematic. Standard Components. Options & Accessories.
PRESSURE REDUCING CONTROL VALVE 02/09 Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) P/L Standard Components 1 Main Valve
More informationPRESSURE RELIEF VALVE CONTROL VALVE
PRESSURE RELIEF VALVE CONTROL VALVE LEHRY Pressure Relief Valve, Sustaining or Backpressure Control Valve is designed to permitting flow when upstream pressure is above the adjustable setpoint of the control
More informationPRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Closes quickly when downstream pressure exceeds reduced pressure setpoint 3 PRESSURE REDUCING VALVE with SURGE
More informationMark 5108 Series. Back Pressure Regulating Valves Mark 5108 Series. Back Pressure Regulating Valves. Valve Features. Operation
Mark 5108 Series Back Pressure Regulating Valves In many liquid piping systems, it is vital that line pressure is maintained within relatively narrow limits. The Mark 5108 is designed to do just that.
More informationBERMAD Fire Protection
Differential-Pressure Sustaining Valve Description The Model FP-436 Differential-Pressure Sustaining Valve is a hydraulically-operated, diaphragm-actuated, control valve that sustains minimum pre-set,
More informationVALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
More informationDOROT CONTROL VALVES CATALOGUE
DOROT CONTROL VALVES CATALOGUE Content SERIES 80 Globe & Angle Irrigation Valves 4 SERIES 80 80-1, 80-3/4 Turf Irrigation Valves 6 SERIES 75 Gal Plastic Valves 8 SERIES 95/96 UPVC Valves 10 Plastic Control
More informationAutomatic Control Valves
Automatic Control Valves The Automatic Answer to Fluid Control Watts.com Trust Watts ACVs for Quality, Performance & Reliability You need: Unquestionable confidence in the quality and performance of the
More informationBERMAD Waterworks. Booster Pump Control Valve Active Check Valve. 700 Series. Model 740. Features and Benefits. Major Additional Features
Booster Pump Control Valve Active Check Valve Isolates system from the effects of pump starts and stops for: Solitary single speed pumps Battery of single speed pumps (add & switch) Battery of variable
More informationPRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE
PROJECT NAME LOCATION PRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 2-1/2 in. (65 mm) through 18 in. (450 mm) Control
More informationLEAD FREE * LFM115 (Globe) LFM1115 (Angle)
ES-ACV-SB-LFM115_LFM1115 LEAD FREE * Pressure Reducing Control Valve Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) P/L
More informationAUTOMATIC CONTROL VALVES. TIS asia
AUTOMATIC CONTROL VALVES VALVES DEDICATED TO THE WATER DISTRIBUTION NETWORK AND HYDROPOWER SECTOR WE DO NOT SELL JUST VALVES, WE SELL A SOLUTION FOR THE EFFICIENCY OF THE WATER NETWORK TIS asia MADE IN
More informationLEAD FREE * LFF115 (Globe) LFF1115 (Angle)
ES-ACV-SB-LFF115_LFF1115 LEAD FREE * Pressure Reducing Control Valve Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS)
More informationPRESSURE RELIEF / SUSTAINING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE RELIEF / SUSTAINING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART
More informationMark 6127 Series. Pressure Regulators Mark 6127 Series. Pressure Reducing Valves. Valve Features. Operation
Mark 6127 Series Pressure Reducing Valves The primary function of the Mark 6127 is to reduce a greater upstream pressure to a lesser, more manageable downstream pressure, operating without regard to either
More informationVALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
More informationHELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
More information50-01 (Full Internal Port) (Reduced Internal Port) Pressure Relief. & Pressure Sustaining Valve MODEL
50-01 650-01 & 1 Hytrol (Main ) 2 X42N-2 Strainer & Needle 3 CRL Control Accurate Pressure Control Optional Check Feature Fast Opening to Maintain Line Pressure Slow Closing to Prevents s Completely Automatic
More informationCOMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES 2.01 COMBINATION RESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVE
PROJECT NAME LOCATION COMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900
More informationBERMAD BERMAD BERMAD WW M
Surge Anticipating Control Valve with Solenoid Control Eliminates surge in all pumping systems: Booster & deep well, single & variable speed Eliminates surge in all distribution networks: Municipal, high-rise
More informationDeluge Pressure Reducing Valves. Model 68 DE\ EL\ PORV\ PR. Electrically and Pneumatically Actuated, Pressure Reducing, Remote-Reset, Deluge Valve
Dorot Fire Protection Division Model 68 DE\ EL\ PORV\ PR Electrically and Pneumatically Actuated, Pressure Reducing, Remote-Reset, Deluge Valve Certification & compliance by design ANSI FCI 70- Class VI
More informationMODEL 106-PT / 106-PTC / S106-PT / S106-PTC DOUBLE CHAMBER HYDRAULICALLY OPERATED VALVE
MAIN VALVES MODEL 06-PT / 06-PTC / S06-PT / S06-PTC KEY FEATURES Maintains positive control under all operating pressures Precise positioning Internal drop check option included on the PTC model Available
More informationCast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
More informationHYDRAULIC CONTROL VALVES
HYDRAULIC CONTROL VALVES INC. VALVES, INC HYDRAULIC CONTROL VALVES WORKING PRINCIPALS It is automatic hydraulic control valve designed for make desired modulation processes in main valve network line as
More informationDescription. Functions. Technical data. Applications. Tests. Level control float valve, enabling the control of the filling level.
Level control float valve, enabling the control of the filling level. Description For general information concerning the operation of a Hydrobloc control valve, please consult our general manual (series
More informationDeluge Pressure Reducing Valves. Model 68 DE\ RCL\ PR. Electrically Actuated, Manual-Reset, Pressure Reducing, Deluge Valve
Fire Protection Div. Dorot Fire Protection Division Deluge Pressure Reducing Valves Model 68 DE\ RCL\ PR Electrically Actuated, Manual-Reset, Pressure Reducing, Deluge Valve Certification & compliance
More informationElectronic Control Valves
MODEL 131 Series (Full Internal Port) 631 Series (Reduced Internal Port) Electronic Control Valves Model 131-01/631-01 Simple Proven Design Quality Solenoid Pilot Controls Ideal For SCADA Systems Multi-Function
More informationMODEL 106/206-PG POWER OPERATED GLOBE VALVE Sizes 1/2" to 8" (106-PG) 3" to 10" (206-PG) Installation, Operating and Maintenance Instructions
MODEL 106/206-PG POWER OPERATED GLOBE VALVE Sizes 1/2" to 8" (106-PG) 3" to 10" (206-PG) Installation, Operating and Maintenance Instructions DESCRIPTION: This valve is the basic component used for most
More informationSeries 500 Valves. Product Catalogue. Series 500 Valves. Series 500 Valves. Catalogue. Edition 10/2012
Series 500 Valves Product Catalogue Catalogue Areas Of Activity Waterworks Dorot s valves are especially designed to comply with all the demands of Waterworks systems such as Pressure Management, Low Flow
More informationF300 Pressure Regulator
F300 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P302 has Internal Relief Valve for Overpressure Protection Ideal for Fix Factor Billing The F300 series pilot operated
More informationAWWA C 504 Type - Butterfly Valves AWWA C 504 BUTTERFLY VALVES
AWWA C 504 BUTTERFLY VALVES 19 PRODUCT FEATURES: NSF Certified Fusion Bonded Epoxy Coating and EPDM rubber are used for valves to be used for in direct contact with potable (drinking) water, while all
More informationPRESSURE REDUCING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE REDUCING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL
More informationPneumatics, Automation & Control Solutions
www.baccara-geva.com 500 series hydraulic control valves 500 Series hydraulic control valves general 500 series valves are direct diaphragm closing automatic hydraulic control valves which work with line
More informationPiston Actuated Valve Type G
Piston Actuated Valve Type G Hydraulic Control Valve is the most efficient valve for automatic operation of industrial and municipal distribution systems or any other system that requires adjustable working
More informationSee Water Pressure Reducing Valves Catalog (PHBRWPRV) for more detailed information about the products in this section.
See Catalog (PHBRWPRV) for more detailed information about the products in this section. Water pressure reducing valves PR (36LF) Series Residential and commercial applications The Apollo 36LF pressure
More informationflowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)
flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell
More informationSee Water Pressure Reducing Valves Catalog (PHBRWPRV) for more detailed information about the products in this section.
See Catalog (PHBRWPRV) for more detailed information about the products in this section. WATER PRESSURE REDUCING VALVES PR (36LF) SERIES RESIDENTIAL AND COMMERCIAL APPLICATIONS The Apollo 36LF pressure
More information700 LARGE SIZE SERIES
700 LARGE SIZE SERIES ENGINEERING DATA CONTENT BERMAD 700 Large Size Series 2 Model: 700-M5, 700-M6, 700-M5L 2 Features and Options 2 Technical Data 3 Valve PlugswCharacteristics 3 Valve Travel 3 Flow
More informationBERMAD. Hydraulic Control Valves. 700 Series
BERMAD BERMAD 700 SERIES CONTROL VALVES IN WATERWORKS APPLICATIONS Waterworks is that segment of BERMAD s activities that are associated with water supply and distribution system applications. The heart
More informationPACIFIC. for Agricultural Irrigation Applications. exceptional quality unparalleled performance
PACIFIC Control Valve Solutions for Agricultural Irrigation Applications exceptional quality unparalleled performance Precise Control for Irrigation Applications Typical Industries Served Cla-Val Automatic
More informationMODULATING FLOAT CONTROL VALVE
PROJECT NAME LOCATION MODULATING FLOAT CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 2 in. (50 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL
More informationDifferential Piston Control Valves Pressure, Level and Flow Control
Differential Piston Control Valves Pressure, Level and Flow Control A Century of Experience VAG GA Industries valves are known for long term reliability in the most demanding water and wastewater applications.
More informationAVK TOTAL CONTROL INSIDE BUILDINGS GENERAL VALVES FOR BUILDING
AVK TOTAL CONTROL INSIDE BUILDINGS GENERAL VALVES FOR BUILDING SERVICE MEMBER OF THE GROUP GATE VALVE RESILIENT SEATED FULLY VULCANIZED WEDGE Product series: S02, S21, S06, S15, S55 Rising stem/non rising
More informationBERMAD Waterworks. BERMAD 700 Large Size Series. 700 Series. Features and Options. Model: 700-M5, 700-M6, 700-M5L
BERMAD 700 Large Size Series Model: 700-, 700-, 700-L Large scale pumping systems National and municipal water networks Reservoir and dam water level control Industrial water systems The BERMAD large size
More informationELECTRIC & HYDRAULIC VALVES
ELECTRIC & HYDRAULIC VALVES G500 500 Series Hydraulic Control Valves... 72 Operating Principals..... 73 Available Models... 74 Hydraulic Performance.... 75 G500-S Hydraulic with Manual 1-1/2" - 3"....
More informationSOLENOID CONTROL VALVE
PROJECT NAME LOCATION SOLENOID CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 4 in. (100 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL 1. Standard
More informationWATERWORKS. Reach Optimum Efficiency with OCV Control Valves.
WATERWORKS Reach Optimum Efficiency with OCV Control Valves. Quality products backed by the industry s leading warranty. For over 60 years, OCV has been a trusted name in the waterworks and fluid handling
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More informationAutomatic Control Valves. Providing quality, performance, dependability, and value for water control applications
Automatic Control Valves Providing quality, performance, dependability, and value for water control applications Zurn Wilkins Automatic Control Valves Table of Contents Zurn Wilkins Value...2 Typical
More informationspecification DAtA V R0 pilot operated tank blanket VAlVe, pressure regulating VAlVe SERIES V500
specification DAtA V500-2016-R0 pilot operated tank blanket VAlVe, pressure regulating VAlVe SERIES V500 Series V500 PILOT OPERATED TANK BLANKET VALVE, PRESSURE REGULATING VALVE contents Application, Features,
More informationBERMAD Waterworks. 800 Series. Technical Specifications Metric
Technical Specifications SI 800 Metric Series Patterns and Sizes "Y" Pattern DN40-500 Angle DN40-450 Connection Standard Flanged: ISO 7005-1(ISO 10, 16, 25 & 40) Water Temperature Up to 80ºC Working pressure
More informationCast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
More informationValves Range RVRX - Resilient Seated Gate Valve PN16 Flange
Valves Range RVRX - Resilient Seated Gate Valve PN16 Flange No Component Material 1 Body Ductile iron GGG40 2 Wedge DI Fully Vulcanised EPDM 3 Wedge Nut Brass 4 Stem SS420 5 Bolt Q235+Zinc 6 Gasket EPDM
More informationDeep Well Pump Control Valve
MODEL 61-02 661-02 Deep Well Pump Control Valve Prevent Surges in Pipelines Simple Hydraulic Operation Adjustable Opening & Closing Speeds Solenoid Control Can Be Operated Manually Proven Reliable Design
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More informationALTITUDE CONTROL VALVES FOR ONE WAY FLOW
PROJECT NAME LOCATION ALTITUDE CONTROL VALVES FOR ONE WAY FLOW INTRODUCTION This specification covers the design, manufacture, and testing of 2 in. (50 mm) through 36 in. (900 mm) Control Valves PART 1
More informationDWS 41. Installation Data 44 Performance Specs DWS & DW-PRV Series
IRRIGATION Title Description Details Page Intro 3 2000 Series 4 Model 2000 Solenoid 1 3 12 Model 2000 Solenoid 4 8 15 Model 2030 Low Power Solenoid 1 3 17 Model 2030 Low Power Solenoid 4 8 19 Model 2160
More informationSeries 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
More informationStainless Steel / Iron Valve ISO 9001
CAST IRON GATE VALVE CLASS 125 NON-RISING STEM. (N.R.S.) STEM: SS410 (BRASS / SS304) MODEL: CI-12N (CI-12N/CI-2NS) CAST IRON GATE VALVE CLASS 125 OUTSIDE SCREW AND YOKE. STEM: SS410 (BRASS / SS304) MODEL:
More informationND = Double Door, SEAT NBR ES = Center Guided Silent Check / EPDM NS = Center Guided Silent Check / NBR. Butterfly Valves, Seat in body.
MAS-WDI-1118 MAS W-Series Water Works / Fire Protection Valves ORDERING CODES Series XX = Valve Type X = CWP XX = Design Type XX = End Connection W = AWWA/UL/FM, 10 = Gate Valve A = 300 CWP RS = Rising
More informationAutomatic control valves XLC 300 and 400 series
Automatic control valves XLC 00 and 00 series The company was founded in by transforming the former CSA, which was a trading company dealing with pipes and valves for water networks, into a manufacturing
More informationValves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...
Valves for building Ball valves PN25/20... page 194 PN30/20... page 195 PN40/30 - Lead-free brass... page 196 Valve for gas... page 197 Stem extension valves... page 197 3 way valves... page 197 Mini valves...
More informationSeries 46 Self-operated Regulators Differential Pressure and Flow Limiters Type 46-5 Type 46-6
Series 46 Self-operated Regulators Differential Pressure and Flow imiters Type 46-5 Type 46-6 Application Differential pressure and flow limitation for district heating systems with indirect connection,
More informationT e n c a n Backflo w Specialties
=m, T e n c a n Backflo w Specialties. (800) 66BKFLO (619) 5272525 Fax: (619) 5272527 www.americanbackflow.com Performance is standard: Design and features incorporated into every Watts ACV means consistent,
More informationEstablished in 1982, Modentic Industrial Corporation is involved in the world of stainless steel valves & fittings selling.
Modentic Industrial Corp. ISO 9001 Certified. Established in 1982, Modentic Industrial Corporation is involved in the world of stainless steel valves & fittings selling. Contents A view of valve process
More informationValves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...
Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265
More informationWafer, Semi Lug, Lug and Flanged Type
Year : Wafer, Semi Lug, Lug and Flanged Type Page 1 Year : Specification Description : GVC concentric rubber lined butterfly valves suitable for bi-directional flow and bubble tight shut-off at full rated
More informationNero Needle Valves. Nero Needle Valves
Nero Needle Valves Main Characteristic The needle valve is mainly designed for water flow rate and pressure regulation in a pipeline. The regulation takes place thank the axial movement of the piston,
More informationLEAD FREE * LFF113RFP Flood Protection Shut Down Valve
Technical Bulletin TB-ACV-LFF11RFP LEAD FREE * LFF11RFP Flood Protection Shut Down Valve Installed upstream of Reduced Zone Backflow Preventer. Normally Open Valve - Closes when continuous discharge from
More informationConcentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
More informationValves Range YSTF Y-Strainer PN16 Flanged. Applicable Standards. Technical Data. Material Certification
Valves Range YSTF Y-Strainer PN16 Flanged No Component Material 1 Body Ductile iron GGG40 2 Bonnet Ductile iron GGG40 3 Screen SS304 4 Gasket EPDM 5 Washer 140HV 6 Drain Plug KTH330-08 7 Nut Gade 8.8 8
More informationP200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
More informationSeries 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
More informationBERMAD Irrigation. High Performance Plastic Valves. 100 Series - Water Control Solutions
High Performance Plastic Valves ater Control Solutions 100 Series hyflow High Performance Plastic Hydraulic Control Valves Features and Benefits Durable industrial grade valve design and construction uses
More informationBERMAD Waterworks. Electronic Control Valve. 700 Series. Model Features and Benefits. Major Additional Features
Electronic Control Valve ressure control Flow control Leakage control Level control emperature control Mixture control at mixing junction he Electronic Control Valve combines the advantages of an excellent
More informationP99 Pressure Reducing Regulator
P99 Pressure Reducing Regulator Applications City / District gate operation Commercial buildings Boilers, furnace, oven Plant air service Features 5 Pilot choices for low to extra high pressure Up to 1,000
More informationFLOOD PROTECTION SHUT DOWN VALVE (3 and smaller)
FLOOD PROTECTION SHUT DOWN VALVE ( and smaller) 01/10 2 6 To Floor Drain L X JB11 4 FS99 5 Installed upstream of Reduced Zone Backflow Preventer. Normally Open Valve - Closes when discharge from RPZ Relief
More informationRef ALL POSITIONS CAST IRON CHECK VALVE PN16. Model/Ref:
Model/Ref: 363-366 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 Flanges R.F. ISO PN10/16-10 C + 130 C Max Pressure : 16 Bars up to DN300 ( 10 bars over ) Specifications
More informationOrdering Guide. Ordering Guide. May Water Control Solutions
Ordering Guide Ordering Guide May 2010 100 Series High Performance Plastic Hydraulic/Electric Control Valves100 Series High Performance Plastic Hydraulic/Electric Control Valves Water Control Solutions
More informationSMART SOLUTIONS FOR WATER 600 Series Hydraulic Control Valves Waterworks Irrigation
SMART SOLUTIONS FOR WATER 600 Series Hydraulic Control Valves Waterworks Irrigation COMPANY PROFILE ARMAŞ A.Ş. was founded in 998 to produce valves for potable water and agricultural irrigation systems.
More informationCV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400
More informationPRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3
BUTTERFLY VALVES PRZEPUSTNICE TYPE DESCRIPTION NOMINAL PRESSURE TEMPERATURE DIAMETER STANDARD PAGE B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 B-099 Centric butterfly valve
More informationDeluge Valves. Model 68 DE\ HM-MR. Hydraulically Actuated Manual-Reset Deluge Valve. Dorot Fire Protection Division
Dorot Fire Protection Division s Model 68 DE\ HM-MR Hydraulically Actuated Manual-Reset Certification & compliance by design ANSI FCI 70-2 Class VI seat leakage class UL listed under VLFT category Fire
More informationACE VALVE COMPANY LIMITED
Gate & Globe Valves ACE COMPANY LIMITED ttp://www.acevalve.co.kr Mangdeokri, Juchonmyun, Gimhae, Gyeongnam, Korea. TEL +000 FAX +0~ Email acevalve@acevalve.co.kr omepage www.acevalve.co.kr 0.0. ACE CATALOG
More informationPressure reducing valve Pressure reducing valve in straightway form DN
Pressure reducing valve Pressure reducing valve in straightway form DN 15-150 ARI-PREDU Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Grey cast
More informationDeluge Valves. Model 68 DE\ HRV-MR. Hydraulically Actuated, Anti-Columning, Manual-Reset Deluge Valve. Dorot Fire Protection Division
Fire Protection Div. Dorot Fire Protection Division Deluge Valves Model 68 DE\ HRV-MR Hydraulically Actuated, Anti-Columning, Manual-Reset Deluge Valve Certification & compliance by design ANSI FCI 70-
More informationD-023 PN 16 / 25. Combination Air Valve for Wastewater PATENTED. Description. Applications. Operation. Main Features
PN 16 / 25 Wastewater Combination Air Valve for Wastewater PATENTED EuroC-D023SWG-15-2 Description The D-023 Combination Air Valve combines an air & vacuum component and an air release component in a single
More informationBS 5163 Resilient Wedge Gate Valve
BS 516 Resilient Wedge Gate Valve BS 516 Flanged Resilient OS&Y Gate Valve, Type A, (XZ41X), /16, Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water,
More informationDIAPHRAGM CONTROL VALVE SOLUTIONS
AVK SERIES 859 CONTROL VALVE DIAPHRAGM CONTROL VALVE SOLUTIONS AVK UK DIAPHRAGM CONTROL VALVE SOLUTIONS AVK UK have manufacturing sites in Corby, Chesterfield, and Hyde, Greater Manchester. These are supported
More informationAVIATION FUELING CONTROL VALVES
c o n t r o l v a l v e s. c o m AVIATION FUELING CONTROL VALVES Quality products backed by the industry s leading warranty. For over 60 years, OCV has been a trusted name in the military and commercial
More informationANSI version. The valve closes when the differential pressure rises
Self-operated Regulators Series 42 Differential Pressure Regulator with Type 2424/Type 2428 Actuator and Type 2422 Valve Type 42-24 A Type 42-24 B Type 42-28 A Type 42-28 B ANSI version Application For
More informationLEAD FREE * LFF113RFP Wireless Smart Flood Protection Shut Down Valve with SentryPlus Alert Technology
Technical Bulletin TB-ACV-LFF11RFP_SentryPlus LEAD FREE * LFF11RFP Wireless Smart Flood Protection Shut Down Valve with SentryPlus Alert Technology Installed upstream of Reduced Zone Backflow Preventer.
More informationUPDATE LOG FOR TECHNICAL PROVISIONS DIVISION 4 Date Item(s) Changed Page # 10/1/13 TECHNICAL PROVISIONS DIVISION 4 VALVE SPECIFICATIONS
UPDATE LOG FOR TECHNICAL PROVISIONS DIVISION 4 Date Item(s) Changed Page # 10/1/13 TECHNICAL PROVISIONS DIVISION 4 VALVE SPECIFICATIONS Replace entire document dated 1/12 with the revised document dated
More information