MX2 ports: G3/8, G1/2, G3/4 - MX3 ports: G3/4, G1 Assembly through rapid clamps
|
|
|
- Tamsyn Thompson
- 5 years ago
- Views:
Transcription
1 > Series MX assembled FRL Series MX assembled FRL MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Assembly through rapid clamps»» Compact design»» Dimensions optimization»» Great reliability»» Easy and quick maintenance»» Reduced weight Series MX FRL can be easily assembled through rapid clamps which allow the connection among single components creating an unlimited number of compositions. The FRL groups Series MX are also available in the already mounted version (with a single code). The use of three different types of rapid clamps (standard, with wall fixing screws or with brackets) allows an easy mounting of the assembled groups and to carry out maintenance operations on the single components with no need to disassemble the group. GENERAL DATA Construction Materials modular, compact see catalogue pages referring to the single component Ports MX2: G/8 - G1/2 - G/4 MX: G/4 - G1 Mounting Operating temperature vertical in-line wall-mounting (by means of clamps) panel mounting -5 C 50 C up to 16 bar (according to the single component characteristics) -5 C 60 C up to 10 bar (according to the single component characteristics) /
2 > Series MX assembled FRL CONFIGURATION OF ASSEMBLED GROUPS SERIES MX TO CONFIGURE THE ASSEMBLED GROUPS SERIES MX, USE THE HERE BELOW EXAMPLE AND THE RELATED LEGEND ON PAGE / Configuration of the assembled group in the drawing below: MX2-/8-V01+A2XF00XR004YL00XV16-KK /
3 > Series MX assembled FRL CONFIGURATOR OF ASSEMBLED GROUPS SERIES MX MX 2 - /8 - V01 X F00 - KK - LH MX 2 - /8 - V01 ( ) SERIES ( 1 ) SIZE: 2 = G/8 - G1/2 - G/4 = G/4 - G1 ( 2 ) IN / OUT THREADS: /8 = G/8 1/2 = G1/2 /4 = G/4 1 = G1 MODULE + [ * ] (to configure the modules, see the single components pages): F... = Filter FC... = Coalescing filter FCA... = Activated carbons filter R... = Pressure regulator L... = FR... = Filter-Regulator V... = Lockable isolation valve AV... = Soft start valve B... = Take-off block (MX2: G1/2 only - MX: G1 only) [ * ] The following ACCESSORIES can be added after every single module: REGULATOR AND FILTER-REGULATOR MX2 +A56 = M05-P06 (Pressure gauge) +A57 = M05-P10 (Pressure gauge) +A58 = M06-P12 (Pressure gauge) REGULATOR AND FILTER-REGULATOR MX +A60 = M06-P06 (Pressure gauge) +A61 = M06-P12 (Pressure gauge) X F00 - KK ( 6 ) - LH LOCKABLE ISOLATION VALVE MX2 +A0 = /2 (Silencier) +A1 = /2 (Silencier) +A2 = 291 1/2 (Silencier) +A = 298 1/2 (Silencier) SOFT START VALVE +A00 = PM11-NA (Pressure switch, normally open) +A01 = PM11-NC (Pressure switch, normally closed) TAKE-OFF BLOCK MX2 +A08 = PM11-NA (normally open pressure switch) with fitting for fixing to the module +A09 = PM11-NC (normally closed pressure switch) with fitting for fixing to the module +A0 = PM11-SC with fitting for fixing to the module Example: MX2-/8-V01+A2XF00-KK-LH ( 4 ) MODULES CONNECTION (according to the positioning scheme on p. / ): X = Rapid clamp kit Z = Rapid clamp kit with wall fixing screw Y = Rapid clamp kit with wall fixing brackets ( 5 ) + [ * ] see MODULE () [ ** ] TERMINAL CONNECTIONS + [ ** ] (according to the positioning scheme on p. / ): = no terminal connection HH = n 1 rapid clamp kit with flanges (IN / OUT) JJ = n 1 rapid clamp kit with wall fixing screws + flanges (IN / OUT) KK = n 1 rapid clamp kit with wall fixing brackets + flanges (IN / OUT) WALL CONNECTION: REGULATOR and FILTER-REGULATOR S = Bracket (only with clamps mod. X o HH) Codes examples: MX-1-R..XV..-S; MX-1-R..XV..-HSH ( 7 ) FLOW DIRECTION: = from left to right (standard) LH = from right to left LOCKABLE ISOLATION VALVE MX +A4 = 2901 /4 (Silencier) +A5 = 2921 /4 (Silencier) +A6 = 291 /4 (Silencier) TAKE-OFF BLOCK MX +A06 = PM11-NA (normally open pressure switch) with fitting for fixing to the module +A07 = PM11-NC (normally closed pressure switch) with fitting for fixing to the module +A02 = PM11-SC with fitting for fixing to the module Example: MX-/4-V01+A6XF00-KK-LH ( 4 ) + ( 5 ) + [ * ] REPEATABLE COMBINATION for a n number of times /1.50.0
4 > Series MX assembled FRL Wall fixing - mounting dimensions and positioning scheme Legend of the POSITIONING SCHEME: 1 = rapid clamp with wall fixing screw or with wall fixing bracket 2 = module / flange * POSITIONING SCHEME referring to drawings Y and Z. Legend of the ASSEMBLED GROUPS DRAWINGS: Y = with rapid clamps with wall fixing brackets (MX...-Y) Z = with rapid clamp with wall fixing screws (MX...-Z) G = fixing point L M MX2-Y ,5 14, MX2-Z ,5 7 1,5 M5 MX-Y ,5 - - MX-Z ,5 40,5 1 M6 /
5 > Series MX assembled FRL CODING EXAMPLE MX 2 - / MX 2 / SERIES SIZE: 2 = G/8 - G1/2 - G/4 = G/4 - G1 PORTS: /8 = G/8 1/2 = G1/2 /4 = G/4 1 = G1 GROUP COMPOSITION: = F10 + R004 + L = FR L = V01 + FR L = V01 + FR = FR V16 + AV = FR L00 + V16 + AV = V01 + FR V16 + AV = V01 + FR L00 + V16 + AV + PRESS. NO = V01 + FR L00 + V16 + AV + PRESS. NC = V01 + FR V16 + AV + PRESS. NO = V01 + FR V16 + AV + PRESS. NC = F1 + FC0 /
6 > Series MX assembled FRL Composition of the assembled group Filter Regulator MX2-/ G/ , ,5 MX2-1/ G1/ , ,5 MX2-/ G/ , ,5 MX-/ G/ , MX G , Composition of the assembled group MX2-/ G/ , ,5 MX2-1/ G1/ , ,5 MX2-/ G/ , ,5 MX-/ G/ MX G /
7 > Series MX assembled FRL Composition of the assembled group MX2-/ G/ , ,5 MX2-1/ G1/ , ,5 MX2-/ G/ , ,5 MX-/ G/ , MX G , Composition of the assembled group MX2-/ G/ , ,5 MX2-1/ G1/ , ,5 MX2-/ G/ , ,5 MX-/ G/ MX G /
8 > Series MX assembled FRL Composition of the assembled group Soft start valve MX2-/ G/ , ,5 MX2-1/ G1/ , ,5 MX2-/ G/ , ,5 MX-/ G/ , MX G , Composition of the assembled group Soft start valve MX2-/ G/ , ,5 MX2-1/ G1/ , ,5 MX2-/ G/ , ,5 MX-/ G/ MX G /
9 > Series MX assembled FRL Composition of the assembled group Soft start valve MX2-/ G/ , ,5 MX2-1/ G1/ , ,5 MX2-/ G/ , ,5 MX-/ G/ MX G Composition of the assembled group Soft start valve + pressure switch (NO) MX2-/ G/ , ,5 MX2-1/ G1/ , ,5 MX2-/ G/ , ,5 MX-/ G/ , MX G , /
10 > Series MX assembled FRL Composition of the assembled group Soft start valve + pressure switch (NC) MX2-/ G/ , ,5 MX2-1/ G1/ , ,5 MX2-/ G/ , ,5 MX-/ G/ , MX G , Composition of the assembled group Soft start valve + pressure switch (NO) MX2-/ G/ , ,5 MX2-1/ G1/ , ,5 MX2-/ G/ , ,5 MX-/ G/ MX G /
11 > Series MX assembled FRL Composition of the assembled group Soft start valve + pressure switch (NC) MX2-/ G/ , ,5 MX2-1/ G1/ , ,5 MX2-/ G/ , ,5 MX-/ G/ MX G Composition of the assembled group Filter Coalescing filter MX2-/ G/ ,5 MX2-1/ G1/ ,5 MX2-/ G/ ,5 MX-/ G/ MX G /
MX2 ports: G3/8, G1/2, G3/4 - MX3 ports: G3/4, G1 Modular Bowl with technopolymer cover and bayonet-type mounting
> Filters Series MX CATALOGUE > Release 8.5 Filters Series MX MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Modular Bowl with technopolymer cover and bayonet-type mounting Removal of impurities and condensate
Lockable isolation 3/2-way valves Series MX 3/
CATALOGUE > Release 8.5 > /2-way isolation valves Series MX Lockable isolation /2-way valves Series MX New MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Modular Manual, electro-pneumatic, servo-pilot and
F. R. L. FRL Series MC Assembled. Ports G1/4, G3/8 and G1/2
MC S E R I E S Catalogue 2005-200 FRL Series MC Assembled Ports G1/4, G3/8 and G1/2 The FRL Series MC in the assembled version are more easy to order (one single code) and to mount. The versione with terminal
with interchangeable cartridges: 1/8, 1/4 and 3/8 threaded or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm
Series MD coalescing filters New Ports with interchangeable cartridges: threaded (1/8, 1/4, /8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 1 mm. Modular assembly Bowl with technopolymer
CAPTIS. The modular and flexible system for internal and external clamping
NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
SOLENOID VALVES AND PNEUMATIC VALVES
S E R I E S P Directly operated mini-solenoid valves Series P 3/ way N.C. or N.O. Ports M5 (for single base) Cartridge ø 3 and 4 (for manifold) Note: All the serie P electrovalves are basic in DC. For
Air treatment filter EZF G 3/8 - G 1/2 - G 1
EZ filter EZF G 3/8 - G 1/2 - G 1 Filters series "EZF" are produced with connections G 3/8, G 1/2 and G 1; they are available with various degrees of filtration and with manual, semiautomatic or automatic
Renaissance Swing. Item# L-GZ542PCO
Renaissance Swing Item# L-GZ542PCO Congratulations on your purchase of our SUNJOY Renaissance Swing. Our clear, easy to follow, step-by-step instructions will guide you through the assembly process from
Filters, Gauges, Regulators
Filters, s, Regulators SCFM = Cubic ft/min at Ambient Condition s Sold Separately s...1/4" Flow SCFM...21 s...1/4" Flow SCFM...15 Filters - Construction Mini 1/4" 3000 Regulators Without Mini 1/4" 3100
FLEXIBILITY, VALUE AND EASE OF USE NO TOOLS REQUIRED
NA-307 EXCELON PRO FLEXIBILITY, VALUE AND EASE OF USE NO TOOLS REQUIRED DEMAND MORE VALUE WITH Norgren Excelon Pro Series You asked... We listened. Conceptualized from customer needs, the Excelon Pro is
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
DUO-LOCK. Double clamping equipment DUO-LOCK HD. Set of hard jaws. Set of soft jaws. Conversion kit for single clamping. THD tower DUO-LOCK HD
Double clamping equipment DUO-LOK HD Pag. 10.3 DUO-LOK base equipment DUO-LOK HD with wrench 10 Set of hard jaws Pag. 10.3 Set of soft jaws Pag. 10.3 onversion kit for single clamping Pag. 10.9 THD tower
Air Service Units Filter pressure regulator + Lubricator - Size 1. Series Technical characteristics. Construction and working characteristics
ir Service Units Filter pressure regulator + Lubricator - Size Series 00 Construction and working characteristics - Zinc alloy body or reinforced technopolymer body with threaded brass insert connections.
Sizes 50, 65, 80. Presence of internal channels for re-lubrication Large range of axis mounting accessories
> Series 5E electromechanical axis C_Electrics > 207 Series 5E electromechanical axis New models Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high
Sizes 50, 65, 80. Accessories for cables fixing. Presence of internal channels for re-lubrication Large range of axis mounting accessories
> Series 5E electromechanical axis C_Electrics > 206 Series 5E electromechanical axis New Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high dynamics
A SERIES. Double-Acting. Pneumatic Valve Actuator TECHNICAL BROCHURE. Designed & engineered for severe-service applications
A SRIS Double-Acting Pneumatic Valve Actuator Designed & engineered for severe-service applications Service and support www.cowandynamics.com A SRIS Design & Materials Barrel Seals Nitrile O -ring standard.
Stainless steel Cylinders Series 90
90 S E R I E S Catalogue 200 Stainless steel Cylinders Series 90 DIN/ISO 643 Single and double-acting (magnetic) ø 32, 40, 50, 63, 80, 00 and 25 cushioned Stainless steel cylinders Series 90 ø 32, 40,
AIR PREPARATION UNITS - ACCESSORIES Accessories - CLAMPS
Accessories - CLAMPS CLAMP for FILTER, LUBRICATOR F13, L13 F14, L14 F15, L15 F17, L17 J L L1 T Inch 1.102 0.216 0.551 0.079 mm 28 5.5 14 2 Inch 1.575 0.256 0.69 0.079 mm 40 6.5 17.5 2 Inch 2.165 0.335
THE Ultra 4-Link Rear
THE Ultra 4-Link Rear Fully machined lightweight aluminum housing & components 16, 17", 18" and 19" center to center 4-link widths 3/4 thick and internally ribbed faceplate Integral wheelie bar mounts
Procedure for the Installation of the Fuser Maintenance Kit CX3535/CX4545 MFP
Procedure for the Installation of the Fuser Maintenance Kit / MFP Step 1 Unit Disassembly Step 2 Unit Re-assembly Step 3 PM Counter Reset Fuser Kit Part Number 58287602 Contents Fuser belt BT-FC35-FU 1
Pressure Controller. Cataloge K Code Characteristics Index. K00-2 Pressure Controller Brief Introduction
K Pressure Controller Cataloge Code Characteristics Index K00-2 Pressure Controller Brief Introduction KC32 Screw Tube Differential Pressure Controller K01 KY10 Bellows Type Differential Pressure Controller
3, 5 port pilot operated valve Pneumatic valve / master valve. Discrete valve. Manifold
K/K, pilot operated valve neumatic valve / master valve MNE0 MNE0 M MN W WG MNS0 MNS0 T L-/ S/0 S/ K/ F CONTENTS Safety precautions 776 Discrete valve ody ing (K/K to ) 868 Sub-plate ing (K to ) 87 Manifold
pneumatic function fittings
Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 email: sales@mdmetric.com web:
ARO-FLO SERIES FILTERS, REGULATORS AND LUBRICATORS
ARO-FLO SERIES FILTERS, REGULATORS AND LUBRICATORS For more than years, Ingersoll Rand ARO has been an industry leader in the design and ARO-Flo Series manufacture of compressors, pneumatic tools, and
Air Preparation Products 652 Series Filter Regulator (FR) for Process Industry Applications
Air Preparation Products Series Filter Regulator (FR) for Process Industry Applications www.asconumatics.eu Table of Contents Series Particulate Filter/Regulator 2 Particulate Filter 5 Regulator 8 Kits
Super-rapid fittings Series X6000 in Stainless Steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in Stainless Steel 316L CATALOGUE > s 2012 Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2),
Product Catalogue Date:
Product Catalogue Date:- 01.04.2017 Sr. 1 2 Spring 3 Double 4 Re-style 5 Re-style Spring 6 Re-style Double 7 Center OFF SPDT 8 Center OFF 2-Way Spring 9 Re-Style Center OFF SPDT 10 Re-Style Center OFF
TOYOTA CAMRY SE V SPORT EXHAUST. Conflicts. Part Number: Code: DE1. Kit Contents. Hardware Bag Contents.
TOYOTA CAMRY SE V6 2014 SPORT EXHAUST Part Number: 00016-32021 Code: DE1 Conflicts Note: Kit Contents Item # Qty. Reqd. Description 1 1 L/H Muffler Assembly 2 1 R/H Muffler Assembly 3 4 5 6 7 8 Hardware
Series 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
GENUINE PARTS INSTALLATION INSTRUCTIONS
GENUINE PARTS INSTALLATION INSTRUCTIONS DESCRIPTION: APPLICATION: PART NUMBER: KIT CONTENTS: Illuminated Kick Plate Maxima (Applicable ONLY to U.S. Market Vehicles with Build Date June 2012 or later) 999G6
2007 CATALOG. Robotic Rotary Joint. Unlimited rotation of robotic tooling
27 CATALOG Robotic Rotary Joint Unlimited rotation of robotic tooling ROBOTIC ROTARY JOINT Product Description The Rotary Joint device allows electrical and pneumatic lines from the robot to feed through
compact magnetic cylinders
CATALOGUE > Release 8.7 > Series 32 cylinders Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»»
Inlet and Exhaust Valve Springs - Remove and Install
Page 1 of 6 'LVDVVHPEO\DQG$VVHPEO\ &&DQG&2QKLJKZD\(QJLQHV 0HGLD1XPEHU5(15 3XEOLFDWLRQ'DWH 'DWH8SGDWHG Inlet and Exhaust Valve Springs - Remove and Install SMCS - 1108-010 Removal Procedure Table 1 Required
Compact power pack program RE 00163/ The Drive & Control Company
Compact power pack program RE 00163/08.06 he Drive & Control Company Bosch Rexroth Oil Control Compact power pack program Compact power pack modular system Compact power packs are available with standard
INTEGRATED HYDRAULIC BRAKE ACTUATORS
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit
Valves, controls + systems Stations for the connection heat generator/heating circuit
Innovation + Quality Valves, controls + systems Stations for the connection heat generator/heating circuit Product range 1 bar 0 4 OV Boiler valves With the boiler connection system, Oventrop offers all
SBA Accumulator Safety Blocks
Overview Introduction For working pressures up to 350 Bar (5075 PSI) IN THIS SECTION Overview 85 Technical Data 87 Models & Dimensions SBA10 89 SBA20 90 SBA32 91 SBAT3L 92 SBAT3P 93 Adapters 94 Ordering
Modular multiple foot switches PC series
3 Modular multiple foot switches PC series Combination diagrams EMERGENCY PUSH BUTTON COMMERCIAL BOX ALUMINIUM PIPES CARRYING ROD ALUMINIUM PIPES HANDLE KIT STABILIZING PLATE DOUBLE CARRYING ROD COMMERCIAL
PUMPS NEW PUMPS. Call for rates and reservations
NEW High Volume, Sound Attenuated, High Head, Specialty, Electric, Hydraulic Submersible, Wellpoint, Air Operated Double Diaphragm, Submersible Sewage, Submersible Dewatering 48 HIGH VOLUME DIESEL PUMP
Modular line 042 1/4. Regulator. Regulator
1 Modular line 1/ Regulator 5..5 3..3 1..1 3,5 1 7 INLET PRESSURE = 1 (1 ),3,,5 1,5 3 1 8 17,5 1 15 1 Regulator * Sensitive high performance model with rolling diaphragm; high stability with low load losses
Bimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE)
Bimba Extruded Linear Thrusters Engineering Specifications Maximum Operating Pressure 140 psi (10 bar) Temperature Range 15 to 160 degrees F (-10 to 70 degrees C) Expected Service Life 1,500 miles (with
for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
DDH hydraulic series. Spring return & double acting Compact actuator DUXVALVES B.V. BORNSESTRAAT PB ALMELO, THE NETHERLANDS
DDH hydraulic series Spring return & double acting Compact actuator DUXVALVES B.V. BORNSESTRAAT 321 7601 PB ALMELO, THE NETHERLANDS TEL : +31(0)546-458347 FAX : +31(0)546-458351 Applications The Duxdrive
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous
Four Shaft Linear Thrusters
Four Shaft Linear Thrusters FOUR SHAFT THRUSTERS Three Models with bores from 2 to 4 Twice the load capacity of comparable two shaft units Reduced deflection and bearing play Compact, light weight robust
MAC VALVES, INC. Rev. T
REVISION LEVEL DATE RELEASED CHANGE DESCRIPTION ECN NUMBER P.E. APPROVAL P.D APPROVAL A 5-11-95 ENGINEERING RELEASE 12727 EPJ B 1-15-96 ADDED 35 SERIES 13228 EPJ ADDED MOD 2938 TO 6500 SERIES, MODS 2910
To ensure this part number fits your specific model year, please visit our website for the latest model year listings at
Exhaust System Installation for Ford Mustang GT, Shelby GT500, & Mustang V6 PN s 11789, 11790, 11791, 11792, 11793, 11796, 11797, 11798, 11799, 11836, 11837, & 11838 ***** Please compare the parts in the
Prodigy Parts Manual Part No
Prodigy Parts Manual Part No. 999-858.01 Table of Contents Parts List and Illustrations Page Number Kits and Routine Maintenance Parts Table...iv Hydraulic Component Location... 1 Engine and Hydraulic
Oil/Air Cooler Units. Standard series EL Type. Test procedure certified following EN 1048
COMPLETE OIL / AIR COOLER SYSTEM WITH AXIAL FAN FOR INDUSTRIAL APPLICATIONS. Application These high performance coolers with axial fans are suitable for hydraulic cooling applications with both return
Modular multiple foot switches PC series
3B Modular multiple foot switches PC series Combination diagrams EMERGENCY PUSH BUTTON COMMERCIAL BOX ALUMINIUM PIPES CARRYING ROD ALUMINIUM PIPES HANDLE KIT STABILIZING PLATE DOUBLE CARRYING ROD COMMERCIAL
BRAZED PHE. Performance - Economy - Reliability - Compact
BRAZED PHE Performance - Economy - Reliability - Compact Head office: PO Box 230, Watford, Hertfordshire WD18 8JY Tel: +44(0)1923 232335 Fax: +44 (0)1923 230266 Email: mail@hrs.co.uk Website: wwwhrshevac.co.uk
Simultaneous Electrical / Pneumatic Connection to Manifold 1/4 or 6mm Integral Push-In Fittings. AC or DC Circuit Board
With an innovative concept and a pioneering approach to valve design, Mead s new technology has directly challenged the conventions of traditional valve manufacturers. In doing so, Mead has overcome many
GM Duramax Diesel
Please confirm that all parts are present before beginning the factory exhaust system removal and CORSA exhaust system installation. 2001-05 BILL OF MATERIALS: PN 15201, 15203, 15204 & 15210: (1) Muffler,
CUMMINS 30KVA. Voltage kva kw kva kw Amp 400/230 30,00 24,00 27,00 21,60 38,00
CUMMINS 30KVA 3 Phase Ratings, 50 Hz, PF 0,8 Rating (ESP) Prime Rating (PRP) Voltage kva kw kva kw Amp 400/230 30,00 24,00 27,00 21,60 38,00 Rating (ESP): Prime Rating (PRP): Applicable for supplying power
Aluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
Prodigy Parts Manual Part No
Prodigy Parts Manual Part No. 999-88.02 Table of Contents Parts List and Illustrations Page Number Kits and Routine Maintenance Parts Table...iv Hydraulic Component Location... 1 Engine and Hydraulic Pump
AIR PREPARATION PRODUCTS
72 Series Modular Components Quikclamp Maximum Pressure: 17 bar (250 psig) Maximum Temperature: 65 C (150 F) Use with all Excelon 72 Products to provide modular installation capability. Flanges on the
Please compare the parts in the box with the bill of materials provided to assure that you have all the parts necessary for this installation.
Exhaust System Installation for Ford Mustang GT, Shelby GT500, & Mustang V6 PN s 11789, 11790, 11791, 11792, 11793, 11796, 11797, 11798, 11799, 11836, 11837, & 11838 These instructions have been written
AIR PREPARATION PRODUCTS F.R.L. 3 PCS Combination F.R.L. 2 PCS Combination Filter - Regulator
AIR PREPARATION PRODUCTS 2.1 F.R.L. 3 PCS Combination 42-43 42-43 2.2 F.R.L. 2 PCS Combination 44-45 2.3 Filter - Regulator 46-47 2.4 Filter 48-49 44-45 46-47 48-49 2.5 Pressure Regulator 50-51 50-51 2.6
FLUID POWER COMPONENTS & SYSTEMS
FLUID POWER COMPONENTS & SYSTEMS Page Thank you for your interest in Motion Controls LLC. We have been building high quality air and hydraulic cylinders for 50 years in the USA. Motion Controls LLC is
Single Seated Globe Control Valves
Product 1: Top Guided Single Seated Control Valves Type: Globe Size: 1-1/2'', 2'', 2-1/2'', 3'', 4'', 6''and 8 (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN64, JIS10K~JIS40K) Body Material:
SERIES HH WITH HYDRAULIC ROD LOCK
HH LOCK TAB HH Rod Lock HH Options SERIES HH WITH HYDRAULIC LOCK The TRD difference... TRD s floating rod bushing design and RL Series Rod Lock = OPTIMIZED RESULTS and SUPERIOR PERFORMANCE. For rod locks
Pressure independent balancing and control valve For ON/OFF control
KT 512 Pressure independent balancing and control valve For ON/OFF control Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING ADVANTAGE High-performing and compact, these
Single-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned
> Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25
Stockists of Seals, Bearings and Associated Products
www.dtseals.co.uk Stockists of Seals, Bearings and Associated Products 2 DT Seals: The Seal and Bearing Experts DT Seals: The seal and bearing experts We are a leading independent Seal and Bearing stockists
Voltage kva kw kva kw Amp 400/ ,00 88,00 100,00 80,00 144,00
cummins diesel 0 kva Phase Ratings, 0 Hz, PF 0,8 Rating (ESP) Prime Rating (PRP) Voltage kva kw kva kw Amp 00/0 0,00 88,00 00,00 80,00,00 Rating (ESP): Prime Rating (PRP): Applicable for supplying power
Double and single-acting, double-acting non-rotating, magnetic ø12, 16, 20, 25 mm ø 32, 40, 50, 63, 80, 100 mm UNITOP
CATALOGUE > Release 8.7 > Series 3 cylinders Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP» Compact design»
Automation Components
www.linearactuators.com Automation Components M o v o Z M o v o p a r t A c c u s l i d e S u p e r s l i d e M i c r o s t a g e P r e c i s i o n A c t u a t o r s GB. 1 0 1 2 3 4 5 6 7 8 9 10 11 12
Key selector switches
Key selector switches Selection diagram A B C D PY333 PY334 PY335 PY336 THREE POSITIONS 3AC 3BC 3CC 3HC 3LC 3MC KEY CODING TWO POSITIONS 2AV 2BV 2CV POSITIONS FIXING RING 1 3 Plastic ring Metal ring EXTERNAL
Magnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm
CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
Features. when stopping. Various mounting styles. Rod type. Bore size (Heavy Duty) (Standard)
Features Symbol Standard tie rod type hydraulic cylinder Double acting hydraulic cylinder for 70 kgf/cm 2 or 140kgf/cm 2 with bore sizes from 40 to 250. High performance cushion to reduce shock Double
SHIMLESS INDUSTRIAL LINEAR BEARINGS - PATENT PENDING
08 LINEAR MOTION SHIMLESS INDUSTRIAL LINEAR BEARINGS - PATENT PENDING Shimless Industrial Linear Bearings are designed to be used in both low and high acceleration/deceleration applications. The Shimless
Plinths for modular and monobloc cabinets and consoles
Plinths for modular and monobloc cabinets and consoles New range Ease of mounting and handling DKC s Ram-Block line offers a new plinth for CQE modular cabinets, CAE monobloc enclosures and consoles. This
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Series 16: ø 8-10 - 12 bumpers Series 24: ø 16-20 - 25 bumpers and magnetic piston Series 25: ø 16-20 - 25 adjustable cushion and magnetic piston»»
YOUR POWER PARTNER. Enclosed product is tested according to EU noise legislation 2000/14/EC. Voltage kva kw kva kw 400/ ,
INTRODUCTION Water cooled, Diesel engine Radiator with mechanical fan Protective grille for rotating and hot parts Electric starter and charge alternator Starting battery (with lead acid) including rack
Universal Groomer Drive Kit Greensmaster Flex 1800 and 2100 eflex 1800 and 2100 or Greensmaster 3000 Series DPA Cutting Units
Form No. 3408-173 Rev C Universal Groomer Drive Kit Greensmaster Flex 1800 and 2100 eflex 1800 and 2100 or Greensmaster 3000 Series DPA Cutting Units Model No. 04648 Register at www.toro.com. Original
C05 Short Stroke Cylinders
Linear Actuators P1G Cylinders Ø6, 10 & 16mm Bore sizes Non-lube operation Corrosion resistant design Integral mounting thread Compact construction Single acting as standard. Catalogue No. PDE2571TCUK-ul
TECHNICAL INFORMATION
TECHNICAL INFORMATION Model. Description DDF481 (XFD07*1) 18V Cordless driver drill *1 Model number for USA CONCEPT AND MAIN APPLICATIONS Model DDF481 (XFD07*1) is a supreme class cordless driver drill
Linear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD
Linear Drive with and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Contents Description Page Overview 11-14 Version with Recirculating Ball Bearing Guide Technical Data 15-17
This generator set has been designed to meet ISO 8528 regulation. Enclosed product is tested according to EU noise legislation 2000/14/EC
This generator set has been designed to meet ISO 8528 regulation. This generator set is available with CE certification. Enclosed product is tested according to EU noise legislation 2000/14/EC 3 Phase
Valve Islands Series F
CATALOGUE > s 01 Valve Islands Series F > Valve Island Series F Multipole integrated electrical connection (PNP) Valve functions: x/; x3/; 5/; 5/3 CC The use of technopolymer in this Series has allowed
Linear Thrusters/PneuMoment
/PneuMoment Extruded TE Series (Composite Bearings) 3.3-3.10 3.11-3.16 T Series Multiple Position T4 Series Movable Housing 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 Pneu-Moment Checklist PneuMoment Pneumatic
Linear Thrusters/PneuMoment
/PneuMoment Extruded TE Series 3.3-3.10 3.11-3.16 T Series Multiple Position T4 Series Movable Housing 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 Pneu-Moment Checklist PneuMoment Pneumatic Actuators PneuMoment
August Product Price List STERLING.
August 2018 Product Price List STERLING P UM P S www.sterlingpumps.com.au Sterling Pumps are an Australian based pump and motor manufacturer based in Pakenham, just outside Melbourne. As a complete solution
Operation Manual REFLEX SIGHT NC 6X Sparks Ave., Toronto, ON, M2H 2S5, Canada
Operation Manual REFLEX SIGHT NC 6X50 105 Sparks Ave., Toronto, ON, M2H 2S5, Canada IMPORTANT INFORMATION Read prior to activation. You have just purchased a sophisticated electronic device. To operate
T&S BRASS AND BRONZE WORKS, INC.
Saddleback Cove / P.O. Box 088 Travelers Rest, SC 9690 B-0708 Travelers Rest, SC: 800-476-403 Simi Valley, CA: 800-43-050 Fax: 864-834-358 www.tsbrass.com 4 7/6" 3mm This Space for Architect/Engineer Approval
Linear Thrusters/PneuMoment
/PneuMoment Extruded 3.3-3.10 TE Series 3.11-3.16 T Series 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 PneuMoment Pneumatic Actuators PneuMoment Application 3.33 3.34-3.48 3.49 Bimba 304 stainless steel body
It s as simple as A,B,C...
TE 7000 It s as simple as A,B,C... Designing a data centre should be made easy and configuring a rack should be easier. In fact it should be as simple as ABC... This quick find brochure is designed to
Linear Thrusters/PneuMoment
/PneuMoment Extruded 3.3-3.10 TE Series 3.11-3.16 T Series 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 PneuMoment Pneumatic Actuators PneuMoment Application 3.33 3.34-3.48 3.49 Pneu-Moment Bimba Pneu-Moment
10. MOULD CLAMPING. 212 Moulding Supplies Edition 9 // POWER CLAMPS 10.2 STANDARD CLAMPS
10. MOULD CLAMPING 213 214 10.1 POWER CLAMPS 10.2 STANDARD CLAMPS 212 Moulding Supplies Edition 9 // www.mouldpro.com POWER CLAMPS POWER SLIDING CLAMP Part No. Thread Size h-min h-max s e1 d sw L e b c
Voltage kva kw kva kw Amp 400/ ,00 160,00 180,00 144,00 259,00
3 Phase Ratings, 50 Hz, PF 0,8 Rating (ESP) Prime Rating (PRP) Voltage kva kw kva kw Amp 400/230 200,00 160,00 180,00 144,00 259,00 Rating (ESP): Prime Rating (PRP): Applicable for supplying power to varying
Air Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices S T C. Tel:
Air Cylinders Precision Engineered Fine Quality Excellent Prices Advanced Design connects fluid power to industrial automation Tel: 650-856 8833 www.stcvalve.com H1 83 Contents Air Cylinder Numbering System
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
2012 DC Electropumps Bull
1 DC Electropumps Bull sales@hydronit.com +39 3 1841 1 ELECTROPUMPS BULL series ordering codes ELECTROPUMP BULL 8 MODEL CODE EPB8 -,5 4DC /S15 - K1,1 V** Electro Pump Bull 8 series Dc electric motor power
P 602. This generator set has been designed to meet ISO 8528 regulation. This generator set is manufactured in facilities certified to ISO 9001.
This generator set has been designed to meet ISO 88 regulation. This generator set is manufactured in facilities certified to ISO 900. This generator set is available with CE certification. Enclosed product
1.2 Switched socket outlets with interlock
. Switched socket outlets with interlock. OMNIA Series OMNIAPLUS Series ADVANCE Series ADVANCE System ADVANCE-GRP System ADVANCE-GRP Series 8 87 Switched socket outlets with interlock. IP IP/IP7 > V
This generator set has been designed to meet ISO 8528 regulation. This generator set is manufactured in facilities certified to ISO 9001.
This generator set has been designed to meet ISO 88 regulation. This generator set is manufactured in facilities certified to ISO 900. This generator set is available with CE certification. Enclosed product
DSN COMPACT AND WATERTIGHT DECONTACTOR GRP 20 A/32 A/63 A
DSN COMPACT AND WATERTIGHT DECONTACTOR GRP 20 A/32 A/63 A Automatic IP66/IP67/IP69k AC-22 and ac-23 breaking capacity Chemical resistant GRP UL 94 casing Impact resistance IK08, vibration resistance -40
Product Data Sheet. Part Number: Gen 3 Frame LH Fill. Product Technical Specifications
Part Number: 116883 Part Description: Fuel Storage Module (FSM) Gen 3 Frame LH Fill Product Technical Specifications General Specifications Designed Location... Frame Rail Mount (FRM) Gasoline Gallon Equivalancy