Lashing Components. Chain Tensioner Other Lashing Products 6:18

Transcription

1 Components Chain Tensioner Other Products 6:18

2 Components Chain Tensioner, GT 7:2-7:4 Chain 7:4 Midgrab MIG 7:4 Grab Hook GG with ocking Pin 7:5 Sling Hook 7:5 Safety Hook 7:5 Weldable ifting Point 7:5 Screw-on ifting Point 7:5 7 WARNING: Failure to read, understand and comply with following instructions, working load limits and specifications in this publication could result in serious injury or damage to property.

3 Chain Tensioner - GT The chain tensioner from Gunnebo Industries, GT, is integral in one set. It is made of high strength Grade 10 material and the ratchet handle contributes to a fast and ergonomic lashing procedure. The GT is fitted with safety pins to prevent unintended release of the threaded end fittings. GT has 25% increased Capacity (C) compared to Grade 8 lashings and high Standard Tension force (STF) thanks to the unique ratchet handle. Our chain tensioner is designed to be compatible with the GrabiQ product range, enabling the choice of robust endhooks with latches. Can also be provided as approved for lifting purposes. Unique enefits with our Chain Tensioner Short Handle Fully protected ratched mechanism with 8 steps per 90 degree pull, enabling use in very narrow spaces. Easy to change direction. The rubber handle decreases the risk of slipping and is convenient in cold climates. Open Design For easier and faster cleaning and lubrication. Allows dirt to fall through instead of building up. Two drain holes in the body prevent water residue. Trapezoidal Thread Makes the thread less sensitive to dirt and particles. ow-friction treated for trouble free operation. Makes lashing faster. Safety pins prevents unintended unwinding. 7:2 All dimensions in mm

4 & Transport Chain System Gunnebo Industries offers a complete chain lashing system approved according to EN The system has been developed with focus on the user s needs and working environment, and with safety as highest priority. The unique Midgrab chain shortener saves valuable time and effort, and is a natural part of an efficient and effective chain lashing system. GT Chain System offers 25% increased Capacity (C) compared to Grade 8 lashings. End Fitting hooks in grade 10, such as the EGKN Sling Hook with a heavy duty latch or the GK Griplatch Safety Hook. Marked with positive indication of the manufacturer, product designation, size, batch number and grade. ID-tag The ID-tag must state the lashing standard, capacity, tension force, traceability and name of manufacturer. It must also clearly say that the set is for lashing only, lifting is prohibited Shortening Function The Midgrab offers instant mounting on any part of the chain, with the ability to shorten the chain in either direction. It is designed to prevent the chain from disengaging. Marked with positive indication of the manufacturer, product designation, size, batch number and grade. 7 Chain Gunnebo Industries high tensile short link chain, grade 10 = 1000 N/mm 2 type KA-10-10, C = 80 kn. Surface treatment: Powder coated. ID-marking of the chain: 10G 7:3 All dimensions in mm

5 Chain Tensioner GT Art. no Model STF (dan) = Min. length (mm) = Max. length (mm) () Z GT Z GT w1 d P Chain, GrabiQ Grade 10 (200) Short link, K W d nom. mm P» mm w1» mm /m MPF kn Z KA Z KA Fulfills the requirements in ASTM A973/A973M-07(2012) EN 818+2:2008 (W +25%, reduced temperature range). See our Full Range of Chain in Chapter 5 Y X Midgrab MIG with locking pins W X Y MIG CC MIG CC Complete set for GT with chain, hooks and MIG Shortener GT with GG hooks Chain GrabiQ with hooks in both ends 7:4 All dimensions in mm

6 & Transport Grab Hook GG with ocking Pin Clevis shortening hook with locking pin for extra safety. No reduction of working load limit, thanks to supporting cradle lugs on either side of hook to prevent chain link deformation. W * GG-8-10 P GG P GG P GG P Fulfills requirements in: EN 1677:2008 (W +25%), ASTM A952/A952M and AS 3776:2015. Sling Hook EGKN Sling hook with latch. W G H EGKN EGKN H Fulfills requirements in: EN 1677:2008 (W +25%), ASTM A952/A952M and AS 3776:2015. G Safety Hook GK Safety hook with clevis connector and grab latch. W G H Z GK Z GK Fulfills requirements in: EN 1677:2008 (W +25%), ASTM A952/A952M and AS 3776:2015. Weldable ifting Point WP D W * capacity (kn) D G R X Z WP-2.5T R X 7 Z WP-4T Z WP-7T G Z WP-10T Z WP-16T Supplied with spring for stay up function. Screw-on ifting Point SP W * C H M X olt protrusion Z SP-1T M Z SP-3T M Z SP-5T M C H X Supplied with spring for stay up function. olt according to: ISO Class :5 All dimensions in mm

7 Contact Information Gunnebo Industrier A Tel: export@gunneboindustries.com Website: Sales Offices Gunnebo Industries Pty td, AUSTRAIA Tel: general.info@gunneboindustries.com.au Gunnebo Industries Sp. z o.o, POAND Tel: zawiesia@gunneboindustries.pl Gunnebo Industries Co. TD, P.R of CHINA Tel: info@gunnebolifting.cn Gunnebo Industries GmbH, GERMANY Tel: info@gunneboindustries.de Gunnebo Industries Corp, NORTH AMERICA Tel: sales@gjcorp.com Gunnebo Anja Industrier AS, NORWAY Tel: sales@gunneboindustrier.no Gunnebo Industries (Pty) td, SOUTH AFRICA Tel: info@gunnebolifting.co.za Gunnebo Industries tda, SOUTH AMERICA Tel: vendas@gunneboindustries.com.br Gunnebo Industrier A, SWEDEN Tel: gbg@gunneboindustries.com Gunnebo Industries td, UNITED KINGDOM Tel: sales@gunneboindustries.co.uk Product Catalog 2018 NORDIC ECOAE Art. no: Z January 2018