MATERIALS HANDLING TECHNICAL MANUAL VOL. 2

Transcription

1 5

2 Beaver maintains a comprehensive range of rigging hardware items for the most rigorous working environment. Comprising of turnbuckles in all configurations, collared Eyebolts and eye nuts, chain split links, snap hooks, quick links and swivels we have the range to suit your work load. 2 MATERIALS HANDLING TECHNICAL MANUAL VOL. 2

3 Contents BEAVER RIGGING SCREWS 4 BEAVER STUB TURNBUCKLES 7 BEAVER SUPER BUCKLES 8 BEAVER COMMERCIAL TURNBUCKLES 9 BEAVER LIFTING EYEBOLTS COLLARED 12 BEAVER LIFTING EYEBOLTS SHOULDERED 16 BEAVER LIFTING EYENUTS SHOULDERED 17 BEAVER CHAIN SPLIT LINKS 18 BEAVER SNAP HOOKS, QUICK LINKS, MOORING SWIVELS 19 BEAVER MOORING SWIVELS 20 PRODUCT REFERENCE GUIDE 21 W H1 H2 MATERIALS HANDLING TECHNICAL MANUAL VOL. 2 3

4 G BEAVER RIGGING SCREWS Beaver Rigging Screws and Turnbuckles Beaver Rated Rigging Hardware Beaver Rated Rigging Hardware complies with a number of different standards. They have a working load limit (W.L.L) and are rated for lifting applications. Beaver s range of quality rigging hardware is manufactured from the finest milling techniques and designed for both heavy industry use and general hardware applications. Turnbuckle End Fittings Eye Jaw Stub Beaver Eye and Eye Rigging Securing of Turnbuckle Screws End Fittings BS 4429 Tested Hot Dipped Galvanised End fittings must be secured. Do not use jamnuts Hook (HasReduced Capacity) Jaw and Eye Rigging Screw Jaw and Eye Combination Turnbuckle Jaw and Jaw Combination Turnbuckle Hook and Hook Combination Turnbuckle Hook and Eye Combination Turnbuckle Lockwire willhold e Open e Closed L G H W.L.L Tonne Turnbuckle Galvanised Inspection Areas Each Galvanised Rated load Each Checkfor cracks&bends depends onend fittings &thread Galvanised Each Checkfor thread damage Galvanised & bent 563rods Lifting Each use weldless construction (Rigging Screw) Galvanised Each Checkfor cracks&bends Rigging Galvanised use alloy 33steel Each Checkfor thread damage Galvanised Vibration & bent rods Each lock using wire. e OPEN Locknuts are not effective e CLOSED Checkfor cracks&bends and add greatly to the load in the screw thread. Body Length = L Checkfor thread damage & bent rods Check for cracks & deformations Eye H Tightening apply only torque as for bolt of equal size. 4 MATERIALS HANDLING TECHNICAL MANUAL VOL. 2

5 G SECTION5 Beaver Jaw and Jaw Rigging Screws with Locknuts BS 4429 Tested Hot Dipped Galvanised e Open e Closed L G H W.L.L Tonne Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each e OPEN e CLOSED H Body Length = L Jaw MATERIALS HANDLING TECHNICAL MANUAL VOL. 2 5

6 G g d3 BEAVER RIGGING SCREWS (CONT D) Beaver Jaw and Eye Rigging Screws BS 4429 Tested Hot Dipped Galvanised e Open e Closed L G H g h d3 W.L.L Tonne Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each e OPEN e CLOSED Body Length = L h Eye Jaw H 6 MATERIALS HANDLING TECHNICAL MANUAL VOL. 2

7 D SECTION5 BEAVER STUB TURNBUCKLES Beaver Forged Stub and Stub Heavy Duty Turnbuckles Hot Dipped Galvanised Body and Black Stubs Ends to BS 716 e Open e Closed L D L1 L Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each D L2 L1 Stub MATERIALS HANDLING TECHNICAL MANUAL VOL. 2 7

8 G BEAVER SUPER BUCKLES Beaver Super Buckles Jaw and Jaw with Lock Nuts. Federal Spec FF-T-791 Forged Hot Dipped Galvanised Inches e Open e Closed L G H W.L.L Tonne x 305 Galvanised Each x 305 Galvanised Each x 305 Galvanised Each x 305 Galvanised Each x 305 Galvanised Each e OPEN e CLOSED Body Length = L Jaw H 8 MATERIALS HANDLING TECHNICAL MANUAL VOL. 2

9 SECTION5 BEAVER COMMERCIAL TURNBUCKLES Beaver Coercial Rigging Hardware Beaver Coercial Rigging Hardware intended use is for non-lifting applications, such as; guying and rigging of fences, pillars etc. In order to increase corrosion against the toughest environment, they are available in both hot dipped galvanised and zinc plated. Beaver Hook and Eye Coercial Turnbuckles Cast Electro Galvanised Galvanised Each Galvanised Each Galvanised Each Galvanised Each & Dimension will have a +10% or -10% Beaver Eye and Eye Coercial Turnbuckles Cast Electro Galvanised Galvanised Each Galvanised Each Galvanised Each Galvanised Each & Dimension will have a +10% or -10% MATERIALS HANDLING TECHNICAL MANUAL VOL. 2 9

10 BEAVER COMMERCIAL TURNBUCKLES (CONT D) Beaver Hook and Eye Coercial Turnbuckles Forged Hot Dipped Galvanised Open Closed A B C D Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each & Dimension will have +10% or -10% e CLOSE e OPEN D A B C Beaver Eye and Eye Coercial Turnbuckles Forged Hot Dipped Galvanised Open Closed A B C Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each & Dimension will have +10% or -10% e CLOSE e OPEN C 10 A MATERIALS HANDLING TECHNICAL MANUAL VOL. 2 B

11 SECTION5 Beaver Fence Straining Screws Forged Hot Dipped Galvanised Open Closed A B C Galvanised Each & Dimension will have +10% or -10% e CLOSE A e OPEN B C Beaver Forged Stub and Stub Coercial Turnbuckles Hot Dipped Galvanised Body and Black Stub End Open Closed L L1 L Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each & Dimension will have +10% or -10% e CLOSE e OPEN L2 L1 L MATERIALS HANDLING TECHNICAL MANUAL VOL. 2 11

12 BEAVER LIFTING EYEBOLTS COLLARED Beaver Lifting Eyebolts And Eyenuts Beaver Lifting Eyebolts and Eyenuts come in a range of threads including BSW, UNC and Metric and are predominately used for lifting applications. Eyebolts and Eyenuts both carry the markings as depicted in image below. Beaver Lifting Eyebolts and Eyenuts VERTICAL LIFT ONLY PLAIN EYEBOLT IS ACCEPTABLE It is recoended that all Eyebolts used for lifting be of forged steel and be equipped with shoulders or collars. The plain or shoulderless eyebolt is fine for vertical loading but as soon as it is loaded at an angle it is subjected to bending and the load it can safely carry is reduced. WLL for Class 3 load application as specified by AS 1418, Part 1 tonnes WLL for Class 3 load application as specified byas 1418, Part 1 A Nominal size of Eyebolt Single Eyebolt Pair of Eyebolts (see note) PLAIN EYEBOLT ANGULAR LIFTS PLAIN OR COLLAR EYEBOLT Axial Trunnion-type mounting pendicular Included angle 30 Included angle 60 Included angle 90 ANGULAR LIFTS COLLARED EYEBOLT ONLY M10 A COLLARED EYEBOLT M10 A COLLAR EYEBOLT ONLY The Australian Standard covering collared Eyebolts is AS The section on "Care and Use of Eyebolts" is taken from that standard M12 M16 M20 M24 M30 M36 M42 M48 M56 M64 M NB: Only use rated Eyebolts for lifting. Reduction factor for single Eyebolt MATERIALS HANDLING TECHNICAL MANUAL VOL. 2

13 H1 H2 SECTION5 Beaver Lifting Collared Eyebolts with B.S.W Thread BS 529 Conforms to AS Inches W H1 H2 D4 W.L.L Tonne /8 Self Colour Each /2 Self Colour Each /8 Self Colour Each /4 Self Colour Each /8 Self Colour Each Self Colour Each /8 Self Colour Each /4 Self Colour Each W D4 MATERIALS HANDLING TECHNICAL MANUAL VOL. 2 13

14 H1 H2 BEAVER LIFTING EYEBOLTS - COLLARED (CONT D) Beaver Lifting Collared Eyebolts with UNC Thread BS 529 Conforms to AS 2317 Inches W H1 H2 D4 W.L.L Tonne /8 Self Colour Each /2 Self Colour Each /8 Self Colour Each /4 Self Colour Each /8 Self Colour Each Self Colour Each /4 Self Colour Each /2 Self Colour Each W D4 14 MATERIALS HANDLING TECHNICAL MANUAL VOL. 2

15 H1 H2 BX / 13 SECTION5 Beaver Lifting Collared Eyebolts with Metric Threads BS 4278 Gold Zinc Dichromate, Conforms to AS 2317 W H1 H2 D4 W.L.L Tonne Zinc Dichromate Each Zinc Dichromate Each Zinc Dichromate Each Zinc Dichromate Each Zinc Dichromate Each Zinc Dichromate Each Zinc Dichromate Each Zinc Dichromate Each W D4 Beaver Lifting Eye Nut with Metric Thread Self Colour, Conforms to AS 2317 A B C D E F G W.L.L. (tonnes) (Kg) Self Colour Each F G A B D WLL4.5T E BEAVER 2 4 MM C MATERIALS HANDLING TECHNICAL MANUAL VOL. 2 15

16 H1 H2 BEAVER LIFTING EYEBOLTS SHOULDERED Beaver Metric Shouldered Eyebolts Gold Zinc Dichromate, Conforms to AS 2317 W H1 H2 D4 W.L.L Tonne Zinc Dichromate Each Zinc Dichromate Each Zinc Dichromate Each Zinc Dichromate Each Zinc Dichromate Each Zinc Dichromate Each Zinc Dichromate Each Zinc Dichromate Each Zinc Dichromate Each W D4 16 MATERIALS HANDLING TECHNICAL MANUAL VOL. 2

17 H SECTION5 BEAVER LIFTING EYE NUTS SHOULDERED Beaver Metric Shouldered Eye Nuts to DIN 582 Gold Zinc Dichromate W H D4 W.L.L Tonne Zinc Dichromate Each Zinc Dichromate Each Zinc Dichromate Each Zinc Dichromate Each Zinc Dichromate Each Zinc Dichromate Each Zinc Dichromate Each W D4 MATERIALS HANDLING TECHNICAL MANUAL VOL. 2 17

18 BEAVER CHAIN SPLIT LINKS Beaver Chain Split Links Electro Galvanised Electro Galvanised Each Electro Galvanised Each Electro Galvanised Each Electro Galvanised Each Electro Galvanised Each Electro Galvanised Each Beaver Chain Split Links Hot Dipped Galvanised Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each 18 MATERIALS HANDLING TECHNICAL MANUAL VOL. 2

19 SECTION5 BEAVER SNAP HOOKS, QUICK LINKS, MOORING SWIVELS Beaver Snap Hooks Electro Galvanised Each Electro Galvanised Each Electro Galvanised Each Electro Galvanised Each Electro Galvanised Each Electro Galvanised Each Beaver Quick Links Galvanised Each Galvanised Each Galvanised Each Galvanised Each MATERIALS HANDLING TECHNICAL MANUAL VOL. 2 19

20 BEAVER MOORING SWIVELS Beaver Coercial Mooring Swivels Eye and Bow Type Beaver Coercial Chain Swivels Bow and Bow Type Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each Galvanised Each 20 MATERIALS HANDLING TECHNICAL MANUAL VOL. 2

21 SECTION5 PRODUCT REFERENCE GUIDE Part Number Page Number Part Number Page Number Part Number Page Number Part Number Page Number MATERIALS HANDLING TECHNICAL MANUAL VOL. 2 21

22 NOTES 22 MATERIALS HANDLING TECHNICAL MANUAL VOL. 2

23 SECTION5 MATERIALS HANDLING TECHNICAL MANUAL VOL. 2 23

24 NATIONAL HEAD OFFICE NEW SOUTH WALES National Sales: Phone: (02) Fax: (02) Sarah Andrews Close Erskine Park NSW 2759 PO Box 5001 St Clair NSW 2759 WESTERN AUSTRALIA Ph: (02) VICTORIA/ TASMANIA Ph: (02) SOUTH AUSTRALIA/ NORTHERN TERRITORY Ph: (08) Fax: (08) QUEENSLAND Ph: (07) Fax: (07) Specifications and dimensions are subject to change without notice Copyright Beaver Brands 2015