GENERAL INFORMATION WHO WE ARE

Transcription

1 ISTRIUT Y

2 GNRL INFORMTION WHO W R INFORMTION G.L. Huyett is a low-overhead manufacturer, master distributor, and importer of non-threaded & engineered fasteners and grease fittings. Our corporate office is located just 50 miles from the geographic center of the United States. With multiple warehouse locations, we are two days shipping time from 60% of the country. We were founded by a German immigrant over 100 years ago in a tin shed located in a place some call the Great merican esert. The experience of trying to work the land and make a life here has been formative to our culture and we are here to serve you. G.L. Huyett has a complete machine shop and manufactures an array of non-threaded fasteners and special assemblies. Our manufacturing facility is equipped to make exotic material products in Monel, Inconel, arpenter 20, and other alloys. WHT W O We serve our customers by reducing total costs through a combination of competitive sourcing, value-added services, and an inventory of more than 100,000 unique fasteners. We save our customers time and money by offering the opportunity to quote, order, ship, and receive a wide variety of parts on one purchase order. We serve our partners by providing programs and opportunities to facilitate the achievement of business and professional goals. We have forged relationships with key manufacturers on a worldwide basis so that you can receive the benefit of global sourcing on standard items, and cost effective solutions on short run parts that are made right here in the US. We serve our employees by creating a work environment that is productive, exciting, and full of possibility. We help our employees meet their professional and personal goals through training programs, mentoring, and employer of choice pay and benefits. We serve our community by working with organizations and individuals to create solutions for their local needs. We are committed to helping education, family-life, and local nonprofit organizations in a manner that improves quality of life. HOW W O IT With over 100,000 parts and a complete machine shop to manufacture special orders, you can consolidate items normally purchased from multiple suppliers into one box. - In stock orders ship next business day. - usiness hours: 7:00 a.m. to 7:00 p.m. ST, Monday thru Friday. - ll parts ship from U.S. Locations, on one PO, along with the Pack List That Will hange Your Life. 2 TO LRN MOR, VISIT HUYTT.OM Proudly Serving istributors Since 1899

3 TL OF ONTNTS GNRL INFORMTION General Information Who We re, What We o, How We o it...2 Safety Information...4 Lifting ye olts Lifting ye olts, Shoulder Pattern...6 Metric IN 580 Lifting ye olts, Shoulder Pattern... 6 SS Lifting ye olts, Shoulder Pattern...7 SS Metric IN 580, Shoulder Pattern...7 Lifting ye olts HG, Shoulder Pattern...8 Lifting ye olts Zinc, Shoulder Pattern...8 Lifting ye olts, Plain Pattern...9 Lifting ye Nuts Lifting ye Nuts Self-olored SS Lifting ye Nuts SS Metric IN 582 Lifting ye Nuts Lifting ye Nuts HG Metric IN 582 Lifting ye Nuts Nut ye olts Nut ye olts, Shoulder Pattern SS Nut ye olts, Shoulder Pattern Nut ye olts, Plain Pattern SS Nut ye olts, Plain Pattern Screw ye olts Screw ye olts, Shoulder Pattern Swivel Hoist Rings Swivel Hoist Rings Metric Swivel Hoist Rings Rod nds Rod nds, lank or Machined to Order...29 levis/yokes djustable Yoke nds...30 Yoke Pins/levis Pins...30 lank levises...31 Finished levises In Stock...31 Shackles/Hooks SS Swivel, ye/ye...32 Swivel, ye/ye...32 Swivel, ye/jaw...32 nchor Shackles HG, Round Pin...33 nchor Shackles Self-olored, Screw Pin...33 nchor Shackles HG, Screw Pin...34 SS nchor Shackles, Screw Pin...34 nchor Shackles, Safety olt...35 SS nchor Shackles, Safety olt...35 hain Shackles, Screw Pin...36 SS hain Shackles, Screw Pin...36 ouble levis Link, Twin...37 Master Link, Pear Shaped...37 lloy Master Link, Oblong...37 ye Grab Hook, Grade levis Grab Hook, Grade levis Grab Hook, Grade ye Slip Hook, Grade levis Slip Hook, Grade levis Slip Hook, Grade levis Slip Hook w/ Safety Latch, Grade levis Slip Hook w/ Safety Latch, Grade INFORMTION Turnbuckles Turnbuckles, ye/ye SS Turnbuckles, ye/ye Turnbuckles, ye/hook Turnbuckles, Hook/Hook ie ast Turnbuckles, ye/ye ie ast Turnbuckles, ye/hook ie ast Turnbuckles, Hook/Hook Turnbuckles, ye/jaw...20 Turnbuckles, Jaw/Jaw...21 SS Turnbuckles, ye/jaw...22 SS Turnbuckles, Jaw/Jaw...22 Turnbuckles, Stub/Stub...23 Turnbuckles Self-olored, odies...24 Turnbuckles HG, odies...25 SS Turnbuckles, odies...26 Turnbuckle nds HG, Hook...26 Turnbuckle nds HG, ye...27 SS Turnbuckle nds, ye...27 Turnbuckle nds HG, Jaw...28 SS Turnbuckle nds, Jaw...28 Rope/hain Hardware hain Proof oil, Grade hain inders, Grade hain Repair Link, Grade old Shut, Grade Hooks, Snap...42 SS Hooks, Snap...42 Links, Quick...43 SS Links, Quick...43 Wire Rope lip,...44 Wire Rope lip, Malleable...44 SS Wire Rope lip, ast...45 Fist Grip lip,...45 luminum Sleeves, 6063 rimp...46 SS Sleeves, rimp...46 Wire Rope Thimble...47 SS Wire Rope Thimble...47 huyett.com sales@huyett.com :2015 ISO RTIFI

4 SFTY INFORMTION INFORMTION It is possible to make a lift, suspend certain objects, or construct barriers using a wide variety of hardware options. With so many choices available, how do you make sure you re using the right hardware for the job? s a supplier to the wholesale distributor market, ztec Lifting Hardware does not regulate or provide engineering guidance over the selection of specific hardware for specific uses, and our distributors have no control as to how our products are used. To ensure your end user customer selects the right hardware for the job, and is prepared to use this hardware correctly, we recommend consultation of industry publications relating to specifications, standards, and best practices for successful rigging and/or lifting. xcellent information can be obtained through US Government publications regarding: rane, Hoist, and Rigging Safety ( and ( O-ST regarding Hoisting and Rigging Standards ( The following charts and information will assist you: IGRM 1 1. It is important to ensure proper alignment of the installed eye bolts before lifting. Referring to IGRM 1: an eye bolt can be turned ¼ turn to ensure proper lifting angles. Never pull across the flats of an eye bolt. orrect orientation - Load is in the plane of the eye Incorrect orientation - When the load is applied to the eye in this direction it will bend. 2. TL 1 makes reference to the safe working load for shoulder pattern eye bolts. Machinery Lifting ye olts in this catalog, and other catalogs to which you may refer, could show a higher Working Load Limit (WLL), or Rated apacity (R). Lifting ye olts have a safety factor of five times the WLL/R with proper seating and full thread engagement. 3. The R of an eye bolt is determined from a straight, zero degree, lift. s IGRM 2 refers, a significant reduction in capacity is experienced any time a lift changes from zero degrees. lthough the NSI design specification denotes a working load capability for a 90 lift, we do not recommend using a lifting angle beyond 45. When the angle of a lift is beyond 45 consider using a Swivel Hoist Ring. Your ccount Order History at huyett.com includes: Order Status Your Favorites LL W ORRS OVR $ 100 * Order Tracking Info xpected Ship ate $ Quantity reaks ustomer Specific Pricing Visit our Knowledge Vault catalogs, product training, and best practices. 4 * Some xclusions pply Proudly Serving istributors Since 1899

5 SFTY INFORMTION TL 1: SF WORKING LO FOR RON STL SHOULR Y OLTS (NSI/SM 18.15) NOMINL SIZ I OF Y (INH) VRTIL SF WORKING LO PR SHOULR Y OLT (LS.) 30 FROM VRTIL 60 FROM VRTIL 90 FROM VRTIL 1/4".69" 400 lbs. 75 lbs. Not Recommended Not Recommended 3/8".94" 1,000 lbs. 400 lbs. 220 lbs. 180 lbs. 1/2" 1.12" 1,840 lbs. 850 lbs. 520 lbs. 440 lbs. 5/8" 1.31" 2,940 lbs. 1,410 lbs. 890 lbs. 740 lbs. 3/4" 1.44" 4,340 lbs. 2,230 lbs. 1,310 lbs. 1,140 lbs. 1" 1.69" 7,880 lbs. 3,850 lbs. 2,630 lbs. 2,320 lbs. 1-1/4" 2.12" 12,600 lbs. 6,200 lbs. 4,125 lbs. 3,690 lbs. 1-1/2" 2.44" 18,260 lbs. 9,010 lbs. 6,040 lbs. 5,460 lbs. 2" 3.06" 32,500 lbs. 15,970 lbs. 10,910 lbs. 9,740 lbs. INFORMTION 4. Rated capacities throughout this catalog assume a working temperature range between 30 and 275 F (-1 and 135 ), any use outside of these temperatures may not provide the same performance as listed. 5. lways ensure the R of complimenting lifting components are in line with your lift requirements. Shackles, chain, eye bolts, pulleys and hooks must all be of the proper WLL/R for the lift. IGRM 2 6. ll hardware items should be inspected before and after each use. Lifting hardware showing signs of wear, thread damage, bending, elongation or defects of any kind should be replaced. To avoid the possibility of reusing defective hardware, defective items should be destroyed by cutting through the connecting area (i.e.: for eye bolts: cut through the eye portion. For shackles: cut through the side.) When You hoose G.L. Huyett, You Get Supply hain Partner Market Intelligence Global Procurement Inventory Management Programs ustom Manufacturing ollaborative ngineering -ommerce est-in-lass rands Performance Reviews ustom Solutions lind ropships ISO 9001:2015 ISO RTIFI huyett.com sales@huyett.com :2015 ISO RTIFI

6 LIFTING Y OLTS LIFTING Y OLTS SHOULR PTTRN esign: Shoulder Pattern UN 1045 arbon Steel Self-olored (other finishes available online) LIFTING Y OLTS ITM NUMR SHNK IMTR () SHNK LNGTH () I () O () RT PITY WIGHT/P. (pprox.) M014 1/4" 1" 3/4" 1-1/8" 600 lbs..05 lbs. M516 5/16" 1-1/8" 7/8" 1-3/8" 1,000 lbs..09 lbs. M038 3/8" 1-1/4" 1" 1-5/8" 1,500 lbs..18 lbs. M716 7/16" 1-3/8" 1-3/32" 1-13/16" 1,800 lbs..26 lbs. M012 1/2" 1-1/2" 1-3/16" 1-15/16" 2,500 lbs..36 lbs. M916 9/16" 1-5/8" 1-1/4" 2-5/16" 3,500 lbs..65 lbs. M058 5/8" 1-3/4" 1-3/8" 2-3/8" 4,200 lbs..75 lbs. M034 3/4" 2" 1-1/2" 2-3/4" 5,500 lbs..98 lbs. M078 7/8" 2-1/4" 1-11/16" 3-1/4" 7,500 lbs lbs. M001 1" 2-1/2" 1-13/16" 3-3/4" 10,000 lbs lbs. M /8" 2-3/4" 2" 4-3/16" 12,000 lbs lbs. M /4" 3" 2-3/16" 4-1/2" 16,000 lbs lbs. M /2" 3-1/2" 3" 5-1/2" 22,000 lbs lbs. Manufactured to SM design specification MTRI IN 580 SHOULR PTTRN esign: IN Specification Metric oarse 1015 arbon Steel Self-olored ITM NUMR SHNK IMTR () THR PITH SHNK LNGTH () I () O () RT PITY WIGHT/P. (pprox.) IN006 6 mm 1.00 mm 12 mm 20 mm 36 mm 70 kgs kgs. IN008 8 mm 1.25 mm 13 mm 20 mm 36 mm 140 kgs kgs. IN mm 1.50 mm 17 mm 25 mm 45 mm 230 kgs kgs. IN mm 1.75 mm 21 mm 30 mm 54 mm 340 kgs kgs. IN mm 2.00 mm 27 mm 35 mm 63 mm 490 kgs kgs. IN mm 2.00 mm 27 mm 36 mm 64 mm 700 kgs kgs. IN mm 2.50 mm 30 mm 40 mm 72 mm 800 kgs kgs. IN mm 2.50 mm 30 mm 40 mm 72 mm 1,200 kgs kgs. IN mm 2.50 mm 33 mm 45 mm 81 mm 1,500 kgs kgs. IN mm 3.00 mm 36 mm 50 mm 90 mm 1,800 kgs kgs. IN mm 3.00 mm 40 mm 55 mm 99 mm 2,500 kgs kgs. IN mm 3.50 mm 45 mm 60 mm 108 mm 3,600 kgs kgs. IN mm 3.50 mm 50 mm 65 mm 117 mm 4,300 kgs kgs. IN mm 4.00 mm 54 mm 70 mm 126 mm 5,100 kgs kgs. IN mm 4.50 mm 63 mm 80 mm 144 mm 7,000 kgs kgs. IN mm 5.00 mm 68 mm 90 mm 166 mm 8,600 kgs kgs. IN mm 5.50 mm 78 mm 100 mm 184 mm 11,500 kgs kgs. IN mm 6.00 mm 90 mm 110 mm 206 mm 16,000 kgs kgs. IN mm 6.00 mm 112 mm 160 mm 296 mm 28,000 kgs kgs. IN mm 6.00 mm 130 mm 180 mm 330 mm 38,000 kgs kgs. Manufactured to uropean IN standards. 6 See Safe Lifting hart on page 5. ll rated capacities consider a straight vertical lift. Use UTION when lifting. ny angle beyond vertical (zero degree) will reduce the rated capacity. Full shank thread to shoulder. Proudly Serving istributors Since 1899

7 100 PIS I # (I) X X Narrow Rim ushings 2-1/4 x 1-1/2 x 10g Zinc M IN US 4/12/16 STINLSS STL LIFTING Y OLTS LIFTING Y OLTS SHOULR PTTRN esign: Shoulder Pattern ast UN 304 Stainless Steel Polished ITM NUMR SHNK IMTR () SHNK LNGTH () I () O () RT PITY WIGHT/P. (pprox.) SSS014 1/4" 1" 3/4" 1-1/8" 500 lbs..05 lbs. SSS516 5/16" 1-1/8" 7/8" 1-3/8" 800 lbs..09 lbs. SSS038 3/8" 1-1/4" 1" 1-5/8" 1,200 lbs..18 lbs. SSS012 1/2" 1-1/2" 1-3/16" 1-15/16" 2,100 lbs..36 lbs. SSS058 5/8" 1-3/4" 1-3/8" 2-3/8" 3,200 lbs..65 lbs. SSS034 3/4" 2" 1-1/2" 2-3/4" 4,500 lbs..98 lbs. Manufactured to SM design specification STINLSS STL MTRI IN 580 SHOULR PTTRN LIFTING Y OLTS esign: IN Specification ast Metric oarse 304 Stainless Steel Polished ITM NUMR SHNK IMTR () THR PITH SHNK LNGTH () I () O () RT PITY WIGHT/P. (pprox.) SS006 6 mm 1.00 mm 12 mm 15 mm 27 mm 65 kgs kgs. SS008 8 mm 1.25 mm 13 mm 20 mm 36 mm 130 kgs kgs. SS mm 1.50 mm 17 mm 25 mm 45 mm 216 kgs kgs. SS mm 1.75 mm 21 mm 30 mm 54 mm 325 kgs kgs. SS mm 2.00 mm 27 mm 36 mm 64 mm 675 kgs kgs. SS mm 2.50 mm 30 mm 40 mm 72 mm 1,200 kgs kgs. SS mm 3.00 mm 36 mm 50 mm 90 mm 1,850 kgs kgs. Manufactured to uropean IN standards. USTOM SOLUTIONS Let us bag, seal, and label parts in the quantities you want, or create a custom assortment branded with your logo. SSORTMNT ISPP-XXX123 X X QUNTITY (Q) LOT (L) /12/16 ustom ssortments ustom Marking ustom Packaging The Pack List That Will hange Your Life ustomized rop Ship Pack List See Safe Lifting hart on page 5. ll rated capacities consider a straight vertical lift. Use UTION when lifting. ny angle beyond vertical (zero degree) will reduce the rated capacity. Full shank thread to shoulder. huyett.com sales@huyett.com :2015 ISO RTIFI

8 LIFTING Y OLTS LIFTING Y OLTS - HOT IPP GLVNIZ SHOULR PTTRN esign: Shoulder Pattern UN 1045 arbon Steel Hot ipped Galvanized LIFTING Y OLTS ITM NUMR SHNK IMTR () SHNK LNGTH () I () O () RT PITY WIGHT/P. (pprox.) MG14 1/4" 1" 3/4" 1-1/8" 600 lbs..05 lbs. MG56 5/16" 1-1/8" 7/8" 1-3/8" 1,000 lbs..09 lbs. MG38 3/8" 1-1/4" 1" 1-5/8" 1,500 lbs..18 lbs. MG12 1/2" 1-1/2" 1-3/16" 1-15/16" 2,500 lbs..36 lbs. MG58 5/8" 1-3/4" 1-3/8" 2-3/8" 4,200 lbs..75 lbs. MG34 3/4" 2" 1-1/2" 2-3/4" 5,500 lbs..98 lbs. MG78 7/8" 2-1/4" 1-11/16" 3-1/4" 7,500 lbs lbs. MG01 1" 2-1/2" 1-13/16" 3-3/4" 10,000 lbs lbs. MG11 1-1/4" 3" 2-3/16" 4-1/2" 16,000 lbs lbs. Manufactured to SM design specification Galvanized ye olts may require oversized tapping of the mating part. LIFTING Y OLTS - ZIN SHOULR PTTRN esign: Shoulder Pattern UN 1045 arbon Steel Zinc ITM NUMR SHNK IMTR () SHNK LNGTH () I () O () RT PITY WIGHT/P. (pprox.) M014-ZP 1/4" 1" 3/4" 1-1/8" 600 lbs..05 lbs. M516-ZP 5/16" 1-1/8" 7/8" 1-3/8" 1,000 lbs..09 lbs. M038-ZP 3/8" 1-1/4" 1" 1-5/8" 1,500 lbs..18 lbs. M012-ZP 1/2" 1-1/2" 1-3/16" 1-15/16" 2,500 lbs..36 lbs. M058-ZP 5/8" 1-3/4" 1-3/8" 2-3/8" 4,200 lbs..75 lbs. M034-ZP 3/4" 2" 1-1/2" 2-3/4" 5,500 lbs..98 lbs. M078-ZP 7/8" 2-1/4" 1-11/16" 3-1/4" 7,500 lbs lbs. M001-ZP 1" 2-1/2" 1-13/16" 3-3/4" 10,000 lbs lbs. M114-ZP 1-1/4" 3" 2-3/16" 4-1/2" 16,000 lbs lbs. Manufactured to SM design specification See Safe Lifting hart on page 5. ll rated capacities consider a straight vertical lift. Use UTION when lifting. ny angle beyond vertical (zero degree) will reduce the rated capacity. Full shank thread to shoulder. Proudly Serving istributors Since 1899

9 LIFTING Y OLTS LIFTING Y OLTS PLIN PTTRN esign: Plain Pattern UN 1045 arbon Steel Self-olored (other finishes available online) ITM NUMR SHNK IMTR () SHNK LNGTH () I () O () RT PITY WIGHT/P. (pprox.) USP014 1/4" 1" 3/4" 1-3/16" 600 lbs..05 lbs. USP516 5/16" 1-1/8" 7/8" 1-7/16" 1,000 lbs..09 lbs. USP038 3/8" 1-1/4" 1" 1-11/16" 1,500 lbs..18 lbs. USP012 1/2" 1-1/2" 1-3/16" 2-1/8" 2,500 lbs..36 lbs. USP058 5/8" 1-3/4" 1-3/8" 2-9/16" 4,200 lbs..75 lbs. USP034 3/4" 2" 1-1/2" 2-7/8" 5,500 lbs..98 lbs. USP078 7/8" 2-1/4" 1-11/16" 3-1/4" 7,500 lbs lbs. USP001 1" 2-1/2" 1-13/16" 3-3/4" 10,000 lbs lbs. USP /4" 3" 2-3/16" 4-1/2" 16,000 lbs lbs. LIFTING Y OLTS Manufactured to SM design specification THR SRIPTION 1/4"-20 XTRNL THRS LSS 2 Thread Size Thread Pitch Thread Series OMMON THR SRIS UN Unified National oarse Thread common mechanical thread type used in the U.S. for screws and bolts. Parallel Thread 60º 0 Thread Size Thread size (diameter) is measured on the outside of threads. It is measured in inches for U.S. fasteners (except for small diameters, where diameters are numbered), and in millimeters for metric fasteners (abbreviated mm or prefixed by M). UNF Unified National Fine Thread common mechanical thread type used in the U.S. for screws and bolts. Parallel Thread 60º 0 Thread Pitch Thread pitch (thread count) refers to the distance peak-to-peak of each thread. Threads grouped close together are considered to be fine, while threads that are spread out are coarse. U.S. fasteners specify thread count as threads per inch (TPI). 20 means the fastener has 20 TPI. Metric fasteners specify a thread pitch which is the distance between the threads. fastener with a thread pitch of M2 has 2 millimeters between each thread. Thread Series Thread series is the thread style of a given fastener. There are many different thread series and each has specific attributes. MTRI Metric oarse Thread The most commonly used type of generalpurpose thread series in the world and one of the first agreed upon standards when ISO was set up in Parallel Thread LG SRW merican National Standard common thread type used in the U.S. for wood screws and bolts. Parallel Thread Spaced Threads one or Gimlet Point 60º 60º 0 0 See Safe Lifting hart on page 5. ll rated capacities consider a straight vertical lift. Use UTION when lifting. ny angle beyond vertical (zero degree) will reduce the rated capacity. Full shank thread. huyett.com sales@huyett.com :2015 ISO RTIFI

10 LIFTING Y NUTS Y NUT - SLF-OLOR FORG esign: Standard uty UN 1045 arbon Steel Self-olored ITM NUMR THR PITH () LL IMTR () HIGHT () I () O () RT PITY WIGHT/P. (pprox.) NS014 1/4" -20 1/4" 1-11/16" 3/4" 1-1/4" 520 lbs..09 lbs. NS516 5/16" /4" 1-11/16" 3/4" 1-1/4" 850 lbs..09 lbs. NS038 3/8" /16" 2-1/16" 1" 1-5/8" 1,250 lbs..18 lbs. NS716 7/16" /8" 2-1/2" 1-1/4" 2" 1,700 lbs..29 lbs. NS012 1/2" /8" 2-1/2" 1-1/4" 2" 2,250 lbs..28 lbs. NS058 5/8" /2" 3-3/16" 1-1/2" 2-1/2" 3,600 lbs..58 lbs. NS034 3/4" /8" 3-7/8" 1-3/4" 3" 5,200 lbs lbs. NS078 7/8" - 9 3/4" 4-5/16" 2" 3-1/2" 7,200 lbs lbs. NS001 1" - 8 7/8" 5" 2-1/4" 4-1/8" 10,000 lbs lbs. NS /4" - 7 1" 5-3/4" 2-1/2" 4-3/8" 15,500 lbs lbs. LIFTING Y NUTS STINLSS STL Y NUT esign: Standard uty ast UN 304 Stainless Steel Polished ST ITM NUMR THR PITH () LL IMTR () HIGHT () I () O () RT PITY WIGHT/P. (pprox.) SN014 1/4" /4" 1-11/16" 3/4" 1-1/4" 260 lbs..09 lbs. SN516 5/16" /4" 1-11/16" 3/4" 1-1/4" 425 lbs..09 lbs. SN038 3/8" /16" 2-1/16" 1" 1-5/8" 625 lbs..18 lbs. SN012 1/2" /8" 2-1/2" 1-1/4" 2" 1,125 lbs..28 lbs. SN058 5/8" /2" 3-3/16" 1-1/2" 2-1/2" 1,800 lbs..58 lbs. SN034 3/4" /8" 3-7/8" 1-3/4" 3" 2,600 lbs lbs. STINLSS STL MTRI IN 582 Y NUT ST esign: IN Specification ast Metric oarse 304 Stainless Steel Polished 10 ITM NUMR THR IMTR () THR PITH HIGHT () I () O () RT PITY Proudly Serving istributors Since 1899 WIGHT/P. (pprox.) SSN06 6 mm 1.00 mm 27 mm 15 mm 27 mm 70 kgs kgs. SSN08 8 mm 1.25 mm 36 mm 20 mm 36 mm 140 kgs kgs. SSN10 10 mm 1.50 mm 45 mm 25 mm 45 mm 230 kgs kgs. SSN12 12 mm 1.75 mm 54 mm 30 mm 53 mm 340 kgs kgs. SSN16 16 mm 2.00 mm 62 mm 36 mm 64 mm 700 kgs kgs. SSN20 20 mm 2.50 mm 71 mm 40 mm 72 mm 1,200 kgs kgs. SSN24 24 mm 3.00 mm 90 mm 50 mm 90 mm 1,800 kgs kgs. Manufactured to uropean IN standards.

11 Y NUT - HOT IPP GLVNIZ LIFTING Y NUTS FORG esign: Standard uty UN 1045 arbon Steel Hot ipped Galvanized ITM NUMR THR PITH () LL IMTR () HIGHT () I () O () esign: RT PITY IN Specification Metric oarse 1015 arbon Steel Self-olored WIGHT/P. (pprox.) NG014 1/4" -20 1/4" 1-11/16" 3/4" 1-1/4" 520 lbs..09 lbs. NG516 5/16" /4" 1-11/16" 3/4" 1-1/4" 850 lbs..09 lbs. NG038 3/8" /16" 2-1/16" 1" 1-5/8" 1,250 lbs..18 lbs. NG716 7/16" /8" 2-1/2" 1-1/4" 2" 1,700 lbs..29 lbs. NG012 1/2" /8" 2-1/2" 1-1/4" 2" 2,250 lbs..28 lbs. NG058 5/8" /2" 3-3/16" 1-1/2" 2-1/2" 3,600 lbs..58 lbs. NG034 3/4" /8" 3-7/8" 1-3/4" 3" 5,200 lbs lbs. NG078 7/8" - 9 3/4" 4-5/16" 2" 3 1/2" 7,200 lbs lbs. NG001 1" - 8 7/8" 5" 2-1/4" 4-1/8" 10,000 lbs lbs. NG /8" - 7 1" 5" 2-1/4" 4-1/8" 12,300 lbs lbs. NG /4" - 7 1" 5-3/4" 2-1/2" 4-3/8" 15,500 lbs lbs. NG /2" /4" 6-3/4" 3" 4-5/8" 22,500 lbs lbs. NG002 2" /2" 10" 4" 6-1/2" 40,000 lbs lbs. Oversize tap available. ontact sales@huyett.com for more information. MTRI IN 582 Y NUT FORG LIFTING Y NUTS ITM NUMR THR IMTR () THR PITH HIGHT () I () O () RT PITY WIGHT/P. (pprox.) IN206 6 mm 1.00 mm 27 mm 20 mm 36 mm 70 kgs kgs. IN208 8 mm 1.25 mm 36 mm 20 mm 36 mm 140 kgs kgs. IN mm 1.50 mm 45 mm 25 mm 45 mm 230 kgs kgs. IN mm 1.75 mm 54 mm 30 mm 53 mm 340 kgs kgs. IN mm 2.00 mm 53 mm 35 mm 54 mm 490 kgs kgs. IN mm 2.00 mm 62 mm 36 mm 64 mm 700 kgs kgs. IN mm 2.50 mm 71 mm 40 mm 72 mm 1,200 kgs kgs. IN mm 2.50 mm 80 mm 45 mm 81 mm 1,500 kgs kgs. IN mm 3.00 mm 90 mm 50 mm 90 mm 1,800 kgs kgs. IN mm 3.00 mm 98 mm 55 mm 99 mm 2,500 kgs kgs. IN mm 3.50 mm 107 mm 60 mm 108 mm 3,600 kgs kgs. IN mm 3.50 mm 116 mm 65 mm 117 mm 4,300 kgs kgs. IN mm 4.00 mm 126 mm 70 mm 126 mm 5,100 kgs kgs. Manufactured to uropean IN standards. Rated capacity relates to the eye nut capacity. The capacity/strength of the attachment stud must be considered. See Safe Lifting hart on page 5. ll rated capacities consider a straight vertical lift. Use UTION when lifting. ny angle beyond vertical (zero degree) will reduce the rated capacity. Forgings 5/16" and larger are marked to note ball diameter. Oversize tap or left hand threads available for some sizes. ontact sales@huyett.com for more information. huyett.com sales@huyett.com :2015 ISO RTIFI

12 NUT Y OLTS NUT Y OLTS SHOULR PTTRN esign: Nut: Shoulder Pattern UN 1045 arbon Steel Hot ipped Galvanized Installed NUT Y OLT ITM NUMR SHNK IMTR () SHNK LNGTH () THR LNGTH () I () O () esign: Nut: RT PITY Shoulder Pattern ast UN 304 Stainless Steel Polished Installed WIGHT/P. (pprox.) NSP142 1/4" 2" 1-1/2" 1/2" 1" 500 lbs..08 lbs. NSP144 1/4" 4" 2-1/2" 1/2" 1" 500 lbs..12 lbs. NSP145 5/16" 2-1/4" 1-1/2" 5/8" 1-1/4" 800 lbs..14 lbs. NSP146 5/16" 4 1/4" 2-1/2" 5/8" 1-1/4" 800 lbs..17 lbs. NSP382 3/8" 2-1/2" 1-1/2" 3/4" 1-1/2" 1,200 lbs..21 lbs. NSP384 3/8" 4 1/2" 2-1/2" 3/4" 1-1/2" 1,200 lbs..26 lbs. NSP386 3/8" 6" 2-1/2" 3/4" 1-1/2" 1,200 lbs..3 lbs. NSP123 1/2" 3-1/4" 1-1/2" 1" 2" 2,100 lbs..4 lbs. NSP124 1/2" 4" 2" 1" 2" 2,100 lbs..41 lbs. NSP126 1/2" 6" 3" 1" 2" 2,100 lbs..64 lbs. NSP128 1/2" 8" 3" 1" 2" 2,100 lbs..71 lbs. NSP121 1/2" 10" 3" 1" 2" 2,100 lbs..83 lbs. NSP584 5/8" 4" 2" 1-1/4" 2-1/4" 3,200 lbs..92 lbs. NSP586 5/8" 6" 3" 1-1/4" 2-1/4" 3,200 lbs. 1.1 lbs. NSP588 5/8" 8" 3" 1-1/4" 2-1/4" 3,200 lbs. 1.2 lbs. NSP580 5/8" 10" 4" 1-1/4" 2-1/4" 3,200 lbs lbs. NSP582 5/8" 12" 4" 1-1/4" 2-1/4" 3,200 lbs lbs. NSP344 3/4" 4-1/2" 2" 1-1/2" 2-3/4" 4,500 lbs lbs. NSP346 3/4" 6" 3" 1-1/2" 2-3/4" 4,500 lbs lbs. NSP348 3/4" 8" 3" 1-1/2" 2-3/4" 4,500 lbs lbs. NSP341 3/4" 10" 3" 1-1/2" 2-3/4" 4,500 lbs lbs. NSP342 3/4" 12" 3" 1-1/2" 2-3/4" 4,500 lbs lbs. NSP345 3/4" 15" 4" 1-1/2" 2-3/4" 4,500 lbs lbs. NSP785 7/8" 5" 2-1/2" 1-3/4" 3-1/4" 7,000 lbs. 2.1 lbs. NSP106 1" 6" 3" 2" 3-3/4" 8,500 lbs. 3.3 lbs. NSP109 1" 9" 4" 2" 3-3/4" 8,500 lbs. 4.4 lbs. NSP /4" 8" 4" 2-1/2" 4-7/16" 13,500 lbs lbs. NSP /4" 12" 4" 2-1/2" 4-7/16" 13,500 lbs. 8 lbs. NSP /2" ontact for Quote 3" 5-1/4" 20,000 lbs lbs. STINLSS STL NUT Y OLTS SHOULR PTTRN 12 ITM NUMR SHNK IMTR () SHNK LNGTH () THR LNGTH () I () O () RT PITY WIGHT/P. (pprox.) SSS142 1/4" 2" 1-1/2" 1/2" 1" 500 lbs..08 lbs. SSS144 1/4" 4" 2-1/2" 1/2" 1" 500 lbs..08 lbs. SSS145 5/16" 2-1/4" 1-1/2" 5/8" 1-1/4" 800 lbs..14 lbs. SSS146 5/16" 4-1/4" 2-1/2" 5/8" 1-1/4" 800 lbs..16 lbs. SSS382 3/8" 2-1/2" 1-1/2" 3/4" 1-1/2" 1,200 lbs..17 lbs. SSS384 3/8" 4-1/2" 2-1/2" 3/4" 1-1/2" 1,200 lbs..26 lbs. SSS386 3/8" 6" 2-1/2" 3/4" 1-1/2" 1,200 lbs..30 lbs. SSS123 1/2" 3-1/4" 1-1/2" 1" 2" 2,100 lbs..40 lbs. SSS126 1/2" 6" 3" 1" 2" 2,100 lbs..42 lbs. SSS584 5/8" 4" 2" 1-1/4" 2-1/2" 3,200 lbs..82 lbs. SSS586 5/8" 6" 3" 1-1/4" 2-1/2" 3,200 lbs..98 lbs. SSS344 3/4" 4-1/2" 2" 1-1/2" 3" 4,500 lbs lbs. SSS346 3/4" 6" 3" 1-1/2" 3" 4,500 lbs lbs. SSS106 1" 6" 3" 2" 4" 8,500 lbs lbs. Proudly Serving istributors Since 1899

13 NUT Y OLTS NUT Y OLTS PLIN PTTRN esign: Nut: Plain Pattern UN 1045 arbon Steel Hot ipped Galvanized Installed ITM NUMR SHNK IMTR () SHNK LNGTH () THR LNGTH () I () O () RT PITY WIGHT/P. (pprox.) NPP142 1/4" 2" 1-1/2" 1/2" 1" 500 lbs..06 lbs. NPP143 1/4" 3" 1-1/2" 1/2" 1" 500 lbs..07 lbs. NPP144 1/4" 4" 2-1/2" 1/2" 1" 500 lbs..08 lbs. H /4" 5" 3" 1/2" 1" 500 lbs..1 lbs. H /4" 6" 3" 1/2" 1" 500 lbs..11 lbs. NPP145 5/16" 2-1/4" 1-1/2" 5/8" 1-1/4" 800 lbs..11 lbs. NPP146 5/16" 4-1/4" 2-1/2" 5/8" 1-1/4" 800 lbs..16 lbs. NPP382 3/8" 2-1/2" 1-1/2" 3/4" 1-1/2" 1,200 lbs..17 lbs. NPP384 3/8" 4-1/2" 2-1/2" 3/4" 1-1/2" 1,200 lbs..25 lbs. NPP385 3/8" 5" 3" 3/4" 1-1/2" 1,200 lbs..28 lbs. NPP386 3/8" 6" 2-1/2" 3/4" 1-1/2" 1,200 lbs..3 lbs. NPP123 1/2" 3-1/4" 1-1/2" 1" 2" 2,100 lbs..4 lbs. NPP124 1/2" 4" 2" 1" 2" 2,100 lbs..41 lbs. NPP125 1/2" 5" 3" 1" 2" 2,100 lbs..55 lbs. NPP126 1/2" 6" 3" 1" 2" 2,100 lbs..64 lbs. NPP128 1/2" 8" 3" 1" 2" 2,100 lbs..71 lbs. NPP121 1/2" 10" 3" 1" 2" 2,100 lbs..83 lbs. NPP122 1/2" 12" 3" 1" 2" 2,100 lbs..96 lbs. NPP584 5/8" 4" 2" 1-1/4" 2-1/2" 3,200 lbs..82 lbs. NPP586 5/8" 6" 3" 1-1/4" 2-1/2" 3,200 lbs..98 lbs. NPP588 5/8" 8" 3" 1-1/4" 2-1/2" 3,200 lbs. 1.2 lbs. NPP580 5/8" 10" 4" 1-1/4" 2-1/2" 3,200 lbs lbs. NPP582 5/8" 12" 4" 1-1/4" 2-1/2" 3,200 lbs lbs. NPP344 3/4" 4-1/2" 2" 1-1/2" 3" 4,500 lbs lbs. NPP346 3/4" 6" 3" 1-1/2" 3" 4,500 lbs lbs. NPP348 3/4" 8" 3' 1-1/2" 3" 4,500 lbs lbs. NPP341 3/4" 10" 3" 1-1/2" 3" 4,500 lbs lbs. NPP342 3/4" 12" 3" 1-1/2" 3" 4,500 lbs lbs. NPP345 3/4" 15" 4" 1-1/2" 3" 4,500 lbs lbs. NPP785 7/8" 5" 2-1/2" 1-3/4" 3-1/2" 7,000 lbs. 2.8 lbs. NPP788 7/8" 8" 4" 1-3/4" 3-1/2" 7,000 lbs lbs. NPP781 7/8" 12" 4" 1-3/4" 3-1/2" 7,000 lbs. 3.8 lbs. NPP106 1" 6" 3" 2" 4" 8,500 lbs. 2.8 lbs. NPP109 1" 9" 4" 2" 4" 8,500 lbs lbs. NPP112 1" 12" 4" 2" 4" 8,500 lbs. 5 lbs. NPP118 1" 18" 6" 2" 4" 8,500 lbs lbs. NPP /4" 8" 4" 2-1/2" 5" 13,500 lbs lbs. NPP /4" 12" 4" 2-1/2" 5" 13,500 lbs. 8 lbs. NPP /4" 18" 4" 2-1/2" 5" 13,500 lbs lbs. NPP /4" ontact for Quote 2-1/2" 5" 13,500 lbs lbs. NPP /2" ontact for Quote 2-3/4" 5-1/2" 20,000 lbs lbs. NUT Y OLT Plain and shoulder patterns are manufactured to SM design specification Nut ye olts are not recommended for lifting applications. See Lifting ye olts on page 6 for lifting applications. Rated capacity refers to a straight (zero degree) pull. Pulling at an angle reduces the rated capacity significantly. huyett.com sales@huyett.com :2015 ISO RTIFI

14 NUT Y OLTS STINLSS STL NUT Y OLTS PLIN PTTRN esign: Nut: Plain Pattern ast UN 304 Stainless Steel Polished Installed ITM NUMR SHNK IMTR () SHNK LNGTH () THR LNGTH () I () O () RT PITY WIGHT/P. (pprox.) SSN142 1/4" 2" 1-1/2" 1/2" 1" 500 lbs..03 lbs. SSN144 1/4" 4" 2-1/2" 1/2" 1" 500 lbs..08 lbs. SSN145 5/16" 2-1/4" 1-1/2" 5/8" 1-1/4" 800 lbs..10 lbs. SSN146 5/16" 4-1/4" 2-1/2" 5/8" 1-1/4" 800 lbs..16 lbs. SSN382 3/8" 2-1/2" 1-1/2" 3/4" 1-1/2" 1,150 lbs..17 lbs. SSN384 3/8" 4-1/2" 2-1/2" 3/4" 1-1/2" 1,150 lbs..25 lbs. SSN123 1/2" 3-1/4" 1-1/2" 1" 2" 2,150 lbs..30 lbs. SSN126 1/2" 6" 3" 1" 2" 2,150 lbs..42 lbs. SSN584 5/8" 4" 2" 1-1/4" 2-1/2" 3,400 lbs..82 lbs. SSN586 5/8" 6" 3" 1-1/4" 2-1/2" 3,400 lbs..98 lbs. SSN346 3/4" 6" 3" 1-1/2" 3" 5,100 lbs lbs. Nut ye olts are not recommended for lifting applications. See Lifting ye olts on page 6 for lifting applications. Rated capacity refers to a straight (zero degree) pull. Pulling at an angle reduces the rated capacity significantly. SRW Y OLTS SRW Y OLTS SHOULR PTTRN NUT Y OLT esign: Shoulder Pattern Lag Screw 1045 arbon Steel Hot ipped Galvanized ITM NUMR SHNK IMTR () SHNK LNGTH () THR LNGTH () I () O () WIGHT/P. (pprox.) S142 1/4" 2" 1-1/2" 1/2" 7/8".04 lbs. S143 1/4" 3" 2-1/4" 1/2" 7/8".07 lbs. S144 1/4" 4" 2-1/2" 1/2" 7/8".08 lbs. S516 5/16" 2-1/4" 1-5/8" 5/8" 1-1/8".06 lbs. S382 3/8" 2-1/2" 1-7/8" 3/4" 1-9/16".19 lbs. S383 3/8" 3" 2-1/4" 3/4" 1-9/16".19 lbs. S384 3/8" 4" 2-1/2" 3/4" 1-9/16".23 lbs. S386 3/8" 6" 3" 3/4" 1-9/16".30 lbs. S122 1/2" 2" 1-1/2" 1" 1-3/4".38 lbs. S123 1/2" 3-1/4" 2-7/16" 1" 1-3/4".38 lbs. S124 1/2" 4" 2-1/2" 1" 1-3/4".45 lbs. S584 5/8" 4" 3" 1-5/32" 2-1/4".69 lbs. Screw ye olts are not recommended for lifting applications. See Lifting ye olts on page 6 for lifting applications. No rated capacity. 14 Proudly Serving istributors Since 1899

15 SWIVL HOIST RINGS SWIVL HOIST RINGS SWIVL N PIVOT esign: Full Swivel and Pivot Machined/Tooled UN G H lloy Steel lack Oxide ITM NUMR SHNK IMTR () () () () (F) (G) (H) F TORQU (ft. lbs.) RT PITY WIGHT/P. (pprox.) SHR516 5/16" 2.67" 9/16".75".38" 1.84" 1-1/4" 7 ft. lbs. 800 lbs..30 lbs. SHR038 3/8" 2.67" 9/16".75".38" 1.84" 1-1/4" 12 ft. lbs. 1,000 lbs..30 lbs. SHR012 1/2" 3.75" 1-1/16" 1.20".50" 2.56" 1-25/32" 28 ft. lbs. 2,500 lbs lbs. SHR013 1/2" 4.78" 3/4" 1.50".75" 3.52" 2-3/8" 28 ft. lbs. 2,500 lbs lbs. SHR014 1/2" 4.78" 1" 1.50".75" 3.52" 2-3/8" 28 ft. lbs. 2,500 lbs lbs. SHR015 1/2" 4.78" 1-1/4" 1.50".75" 3.52" 2-3/8" 28 ft. lbs. 2,500 lbs lbs. SHR058 5/8" 4.78" 1" 1.50".75" 3.52" 2-1/4" 60 ft. lbs. 4,000 lbs lbs. SHR059 5/8" 4.78" 1-1/4" 1.50".75" 3.52" 2-1/4" 60 ft. lbs. 4,000 lbs lbs. SHR060 3/4" 4.78" 1" 1.50".75" 3.52" 2-1/8" 100 ft. lbs. 5,000 lbs lbs. SHR061 3/4" 4.78" 1-1/2" 1.50".75" 3.52" 2-1/8" 100 ft. lbs. 5,000 lbs lbs. SHR062 3/4" 6.52" 1" 2.31" 1.00" 5.14" 2-15/16" 100 ft. lbs. 7,000 lbs lbs. SHR063 3/4" 6.52" 1-1/2" 2.31" 1.00" 5.14" 2-15/16" 100 ft. lbs. 7,000 lbs lbs. SHR078 7/8" 6.52" 1" 2.31" 1.00" 5.14" 2-13/16" 160 ft. lbs. 8,000 lbs lbs. SHR079 7/8" 6.52" 1-1/4" 2.31" 1.00" 5.14" 2-13/16" 160 ft. lbs. 8,000 lbs lbs. SHR001 1" 6.52" 1-1/4" 2.31" 1.00" 5.14" 2-11/16" 230 ft. lbs. 10,000 lbs lbs. SHR003 1" 6.52" 1-1/2" 2.31" 1.00" 5.14" 2-11/16" 230 ft. lbs. 10,000 lbs lbs. SHR004 1" 6.52" 2-1/4" 2.31" 1.00" 5.14" 2-11/16" 230 ft. lbs. 10,000 lbs lbs. SHR /4" 8.73" 1-7/8" 3.19" 1.25" 6.50" 4-1/4" 470 ft. lbs. 15,000 lbs lbs. SHR /2" 12.47" 2-3/4" 4.19" 1.75" 8.55" 6-1/2" 470 ft. lbs. 24,000 lbs lbs. SHR002 2" 12.47" 3-1/8" 4.19" 1.75" 8.55" 6" 800 ft. lbs. 30,000 lbs lbs. SHR /2" 16.50" 4" 5.75" 2.25" 11.72" 8-1/4" 2,100 ft. lbs. 50,000 lbs lbs. MTRI SWIVL HOIST RINGS SWIVL N PIVOT ITM NUMR SHNK IMTR () G () () () (F) (G) (H) H F esign: TORQU (Nm) Full Swivel and Pivot Machined/Tooled Metric oarse lloy Steel lack Oxide RT PITY WIGHT/P. (pprox.) MSHR08 8 x mm 12.5 mm 19.0 mm 9.7 mm 46.7 mm 32.0 mm 9 Nm 400 kgs..40 lbs. MSHR10 10 x mm 17.5 mm 19.0 mm 9.7 mm 46.7 mm 30.0 mm 16 Nm 500 kgs..40 lbs. MSHR12 12 x mm 19.0 mm 38.1 mm 19.0 mm 89.4 mm 60.5 mm 37 Nm 1,050 kgs lbs. MSHR14 14 x mm 29.0 mm 38.0 mm 19.0 mm 89.0 mm 58.0 mm 40 Nm 1,050 kgs lbs. MSHR16 16 x mm 29.0 mm 38.1 mm 19.0 mm 89.4 mm 56.5 mm 80 Nm 1,900 kgs lbs. MSHR20 20 x mm 34.0 mm 38.1 mm 19.0 mm 89.4 mm 52.5 mm 135 Nm 2,150 kgs lbs. MSHR24 24 x mm 37.0 mm 58.7 mm 25.4 mm mm 69.0 mm 311 Nm 4,200 kgs lbs. MSHR30 30 x mm 46.0 mm 81.0 mm 31.7 mm mm mm 637 Nm 7,000 kgs lbs. MSHR36 36 x mm 68.0 mm mm 44.4 mm mm mm 1,085 Nm 11,000 kgs lbs. SWIVL HOIST RINGS See Safe Lifting hart on page 5. ll rated capacities consider a straight vertical lift. Use UTION when lifting. ny angle beyond vertical (zero degree) will reduce the rated capacity. Safety factor is 5x rated capacity. very ring proof tested at 2x. Full shank thread to shoulder. Use torque chart above for proper installation. huyett.com sales@huyett.com :2015 ISO RTIFI

16 TURNUKLS TURNUKLS Y/Y esign: ye/ye UN 1045 arbon Steel Hot ipped Galvanized ITM NUMR FITTING SHNK IMTR () OY TK-UP () OL LOS () OL OPN (Ref.) RT PITY WIGHT/P. (pprox.) T144 1/4" 4" 8-1/4" 12" 500 lbs..30 lbs. T516 5/16" 4-1/2" 9-9/16" 14" 800 lbs..47 lbs. T386 3/8" 6" 12-1/8" 18" 1,200 lbs..75 lbs. T126 1/2" 6" 14" 21" 2,200 lbs lbs. T129 1/2" 9" 17" 25" 2,200 lbs lbs. T122 1/2" 12" 20" 32" 2,200 lbs lbs. T586 5/8" 6" 15-9/16" 22" 3,500 lbs lbs. T589 5/8" 9" 19-1/4" 28" 3,500 lbs lbs. T581 5/8" 12" 21-5/8" 34" 3,500 lbs lbs. T346 3/4" 6" 17-5/8" 25" 5,200 lbs lbs. T349 3/4" 9" 20-3/4" 29" 5,200 lbs lbs. T342 3/4" 12" 23-5/8" 37" 5,200 lbs lbs. T348 3/4" 18" 29-5/8" 49" 5,200 lbs lbs. T786 7/8" 6" 19" 25" 7,200 lbs lbs. T782 7/8" 12" /16" 38" 7,200 lbs lbs. T788 7/8" 18" 30-13/16" 50" 7,200 lbs lbs. T160 1" 6" 21-11/16" 30" 10,000 lbs lbs. T112 1" 12" 27-11/16" 42' 10,000 lbs lbs. T118 1" 18" 33-11/16" 53" 10,000 lbs lbs. T124 1" 24" 39-11/16" 65" 10,000 lbs lbs. T /4" 6" 24-9/16" 32" 15,200 lbs lbs. T /4" 12" 30-9/16" 45" 15,200 lbs lbs. T /4" 18" 36-9/16" 57" 15,200 lbs lbs. T /4" 24" 42-9/16" 69" 15,200 lbs lbs. T /2" 12" 33" 48" 21,400 lbs lbs. T /2" 18" 39" 58" 21,400 lbs lbs. T /2" 24" 45" 70" 21,400 lbs lbs. T /4" 18" 42-3/8" 60" 28,000 lbs lbs. T /4" 24" 48-3/8" 72" 28,000 lbs lbs. T224 2" 24" 55-3/16" 79" 37,000 lbs lbs. T /2" 24" 58-5/8" 82" 60,000 lbs lbs. T /4" 24" 61-1/2" 85" 75,000 lbs lbs. Meets Specification FF-T-791b, Type 1, Form 1 - lass 4. Your ccount Order History at huyett.com includes: Order Status Your Favorites Order Tracking Info Quantity reaks LL W ORRS OVR $ 100 * TURNUKLS xpected Ship ate ustomer Specific Pricing Visit our Knowledge Vault catalogs, product training, and best practices. $ * Some xclusions pply 16 Turnbuckles are rated with full thread engagement. Use UTION to ensure proper installation. Rated capacity refers to a straight (zero degree) pull. Pulling at an angle reduces the rated capacity significantly. See page 5 for more information. Open length estimated dependent on amount of full thread engagement at installation before take-up step. Proudly Serving istributors Since 1899

17 STINLSS STL TURNUKLS TURNUKLS Y/Y esign: ye/ye ast UN 304 Stainless Steel Polished ITM NUMR FITTING SHNK IMTR () OY TK-UP () OL LOS () OL OPN (Ref.) RT PITY WIGHT/P. (pprox.) ST14 1/4" 4" 8-1/4" 12" 320 lbs..30 lbs. ST56 5/16" 4-1/2" 9-9/16" 14" 500 lbs..47 lbs. ST38 3/8" 6" 12-1/8" 18" 800 lbs..75 lbs. ST12 1/2" 6" 14" 21" 1,400 lbs lbs. ST58 5/8" 6" 15-9/16" 22" 2,240 lbs lbs. ST34 3/4" 6" 17-5/8" 25" 4,000 lbs lbs. TURNUKLS Y/HOOK esign: ye/hook UN 1045 arbon Steel Hot ipped Galvanized ITM NUMR FITTING SHNK IMTR () OY TK-UP () OL LOS () OL OPN (Ref.) RT PITY WIGHT/P. (pprox.) TH144 1/4" 4" 8-1/16" 12" 400 lbs..30 lbs. TH516 5/16" 4-1/2" 9-1/2" 14" 700 lbs..47 lbs. TH386 3/8" 6" 11-15/16" 18" 1,000 lbs..75 lbs. TH126 1/2" 6" 13-9/16" 21" 1,500 lbs lbs. TH129 1/2" 9" 17" 25" 1,500 lbs lbs. TH122 1/2" 12" 19-5/8" 32" 1,500 lbs lbs. TH586 5/8" 6" 15-1/2" 22" 2,250 lbs lbs. TH589 5/8" 9" 19-1/4" 28" 2,250 lbs lbs. TH581 5/8" 12" 21-1/2" 34" 2,250 lbs lbs. TH346 3/4" 6" 17-1/2" 25" 3,000 lbs lbs. TH349 3/4" 9" 20-3/4" 29" 3,000 lbs lbs. TH342 3/4" 12" 23-1/2" 37" 3,000 lbs lbs. TH348 3/4" 18" 29-1/2" 49" 3,000 lbs lbs. TH786 7/8" 6" 19" 25" 4,000 lbs lbs. TH782 7/8" 12" 24-7/8" 38" 4,000 lbs lbs. TH788 7/8" 18" 30-13/16" 50" 4,000 lbs lbs. TH160 1" 6" 21-11/16" 30" 5,000 lbs lbs. TH112 1" 12" 27-1/4" 42" 5,000 lbs lbs. TH118 1" 18" 33-11/16" 53" 5,000 lbs lbs. TH124 1" 24" 39-11/16" 65" 5,000 lbs lbs. TH /4" 6" 24-9/16" 32" 6,500 lbs lbs. TH /4" 12" 30-9/16" 45" 6,500 lbs lbs. TH /4" 18" 36-9/16" 57" 6,500 lbs lbs. TH /4" 24" 42-9/16" 69" 6,500 lbs lbs. TH /2" 12" 33" 48" 7,500 lbs lbs. TH /2" 18" 39" 58" 7,500 lbs lbs. TH /2" 24" 45" 70" 7,500 lbs lbs. Meets specifications FF-T-791b, Type 1, Form 1 - lass 6. TURNUKLS Turnbuckles are rated with full thread engagement. Use UTION to ensure proper installation. Rated capacity refers to a straight (zero degree) pull. Pulling at an angle reduces the rated capacity significantly. See page 5 for more information. Open length estimated dependent on amount of full thread engagement at installation before take-up step. huyett.com sales@huyett.com :2015 ISO RTIFI

18 TURNUKLS TURNUKLS HOOK/HOOK esign: Hook/Hook UN 1045 arbon Steel Hot ipped Galvanized ITM NUMR FITTING SHNK IMTR () OY TK-UP () OL LOS () OL OPN (Ref.) RT PITY WIGHT/P. (pprox.) THH144 1/4" 4" 8" 12" 400 lbs..30 lbs. THH516 5/16" 4-1/2" 9-1/4" 14" 700 lbs..47 lbs. THH386 3/8" 6" 11-3/4" 18" 1,000 lbs..75 lbs. THH126 1/2" 6" 13-3/8" 21" 1,500 lbs lbs. THH129 1/2" 9" 17" 25" 1,500 lbs lbs. THH122 1/2" 12" 19-3/8" 32" 1,500 lbs lbs. THH586 5/8" 6" 15-1/4" 22" 2,250 lbs lbs. THH589 5/8" 9" 19-1/4" 28" 2,250 lbs lbs. THH581 5/8" 12" 21-1/4" 34" 2,250 lbs lbs. THH346 3/4" 6" 17-1/4" 25" 3,000 lbs lbs. THH349 3/4" 9" 20-3/4" 29" 3,000 lbs lbs. THH342 3/4" 12" 23-1/4" 37" 3,000 lbs lbs. THH348 3/4" 18" 29-1/4" 49" 3,000 lbs lbs. THH786 7/8" 6" 19" 25" 4,000 lbs lbs. THH782 7/8" 12" 25" 38" 4,000 lbs lbs. THH788 7/8" 18" 30-13/16" 50" 4,000 lbs lbs. THH160 1" 6" 21-11/16" 30" 5,000 lbs lbs. THH112 1" 12" 26-3/4" 42" 5,000 lbs lbs. THH118 1" 18" 33-11/16" 53" 5,000 lbs lbs. THH124 1" 24" 39-11/16" 65" 5,000 lbs lbs. THH /4" 6" 24-9/16" 32" 6,500 lbs lbs. THH /4" 12" 30-9/16" 45" 6,500 lbs lbs. THH /4" 18" 36-9/16" 57" 6,500 lbs lbs. THH /4" 24" 42-9/16" 69" 6,500 lbs lbs. THH /2" 12" 33" 48" 7,500 lbs lbs. THH /2" 18" 39" 58" 7,500 lbs lbs. THH /2" 24" 45" 70" 7,500 lbs lbs. Meets specification FF-T-791b, Type 1, Form 1 - lass 5. LSO VILL T HUYTT.OM Grease Fittings & ccessories Machine Keys & Key Stock Pins & Wire Forms ngineered Fasteners lind Threaded Inserts TURNUKLS Wave & Spring Washers Hose lamps on t see what you re looking for? Give our Sales Team a call today Turnbuckles are rated with full thread engagement. Use UTION to ensure proper installation Rated capacity refers to a straight (zero degree) pull. Pulling at an angle reduces the rated capacity significantly. See page 5 for more information. Open length estimated dependent on amount of full thread engagement at installation before take-up step. Proudly Serving istributors Since 1899

19 I ST TURNUKLS TURNUKLS Y/Y esign: Process-ody: Process-Fittings: Material-ody: Material-Fittings: ye/ye ast Formed Wire UN Malleable Iron 1010 arbon Steel Zinc ITM NUMR FITTING SHNK IMTR () OY TK-UP () OL LOS () OL OPN (Ref.) RT PITY WIGHT/P. (pprox.) T532 5/32" 1-1/4" 3-1/4" 4-1/2" N.04 lbs. T316 3/16" 1-5/8" 4" 5-5/8" N.06 lbs. T732 7/32" 1-7/8" 4-3/4" 6-5/8" N.12 lbs. T014 1/4" 2-1/8" 5-1/4" 7-3/8" N.16 lbs. T516 5/16" 2-5/8" 6-1/2" 9-1/8" N.25 lbs. T038 3/8" 3" 7-3/4" 10-1/2" N.35 lbs. I ST TURNUKLS Y/HOOK esign: ye/hook Process-ody: ast Process-Fittings: Formed Wire UN Material-ody: Malleable Iron Material-Fittings: 1010 arbon Steel Zinc ITM NUMR FITTING SHNK IMTR () OY TK-UP () OL LOS () OL OPN (Ref.) RT PITY WIGHT/P. (pprox.) TH532 5/32" 1-1/4" 3-1/4" 4-1/2" N.04 lbs. TH316 3/16" 1-5/8" 4" 5-5/8" N.06 lbs. TH732 7/32" 1-7/8" 4-3/4" 6-5/8" N.12 lbs. TH014 1/4" 2-1/8" 5-1/4" 7-3/8" N.16 lbs. TH516 5/16" 2-5/8" 6-1/2" 9-1/8" N.25 lbs. TH038 3/8" 3" 7-3/4" 10-1/2" N.35 lbs. I ST TURNUKLS HOOK/HOOK esign: Hook/Hook Process-ody: ast Process-Fittings: Formed Wire UN Material-ody: Malleable Iron Material-Fittings: 1010 arbon Steel Zinc ITM NUMR FITTING SHNK IMTR () OY TK-UP () OL LOS () OL OPN (Ref.) RT PITY WIGHT/P. (pprox.) THH316 3/16" 1-5/8" 4" 5-5/8" N.06 lbs. THH732 7/32" 1-7/8" 4-3/4" 6-5/8" N.12 lbs. THH014 1/4" 2-1/8" 5-1/4" 7-3/8" N.16 lbs. THH056 5/16" 2-5/8" 6-1/2" 9-1/8" N.25 lbs. THH038 3/8" 3" 7-3/4" 10-1/2" N.35 lbs. TURNUKLS ie ast Turnbuckles are not designed for lifting. No rated capacity. huyett.com sales@huyett.com :2015 ISO RTIFI

20 TURNUKLS TURNUKLS Y/JW esign: ye/jaw UN 1045 arbon Steel Hot ipped Galvanized ITM NUMR FITTING SHNK IMTR () OY TK-UP () OL LOS () OL OPN (Ref.) RT PITY WIGHT/P. (pprox.) TJ144 1/4" 4" 8-1/4" 12" 500 lbs..32 lbs. TJ516 5/16" 4-1/2" 9-1/2" 14" 800 lbs..47 lbs. TJ386 3/8" 6" 11-7/8" 18" 1,200 lbs..76 lbs. TJ126 1/2" 6" 13-1/2" 20" 2,200 lbs lbs. TJ129 1/2" 9" 16-1/2" 26" 2,200 lbs lbs. TJ122 1/2" 12" 19-1/2" 32" 2,200 lbs lbs. TJ586 5/8" 6" 15-1/4" 22" 3,500 lbs lbs. TJ589 5/8" 9" 18-1/4" 28" 3,500 lbs lbs. TJ581 5/8" 12" 21-1/4" 34" 3,500 lbs lbs. TJ346 3/4" 6" 17-1/8" 25" 5,200 lbs lbs. TJ349 3/4" 9" 20-1/8" 30" 5,200 lbs lbs. TJ342 3/4" 12" 23-1/8" 36" 5,200 lbs lbs. TJ348 3/4" 18" 29-1/8" 48" 5,200 lbs lbs. TJ786 7/8" 6" 18-1/2" 25" 7,200 lbs lbs. TJ782 7/8" 12" 24-9/16" 38" 7,200 lbs lbs. TJ788 7/8" 18" 30-9/16" 50" 7,200 lbs lbs. TJ160 1" 6" 20-7/8" 29" 10,000 lbs lbs. TJ112 1" 12" 26-7/8" 41" 10,000 lbs lbs. TJ118 1" 18" 32-7/8" 52" 10,000 lbs lbs. TJ124 1" 24" 38-7/8" 65" 10,000 lbs lbs. TJ /4" 6" 24" 30" 15,200 lbs lbs. TJ /4" 12" 30" 44" 15,200 lbs lbs. TJ /4" 18" 36" 56" 15,200 lbs lbs. TJ /4" 24" 42" 68" 15,200 lbs lbs. TJ /2" 12" 32-1/4" 47" 21,400 lbs lbs. TJ /2" 18" 38-1/4" 59" 21,400 lbs lbs. TJ /2" 24" 44-1/4" 71" 21,400 lbs lbs. TJ /4" 18" 41-7/8" 60" 28,000 lbs lbs. TJ /4" 24" 47-7/8" 72" 28,000 lbs lbs. TJ224 2" 24" 54" 78" 37,000 lbs lbs. TJ /2" 24" 58-7/16" 82" 60,000 lbs lbs. TJ /4" 24" 61-1/2" 85" 75,000 lbs lbs. Meets specification FF-T-791b, Type 1, Form 1 - lass 8. PROU ISTRIUTORS OF TURNUKLS 20 Turnbuckles are rated with full thread engagement. Use UTION to ensure proper installation. Rated capacity refers to a straight (zero degree) pull. Pulling at an angle reduces the rated capacity significantly. See page 5 for more information. Jaw ends through 5/8" use nut and bolt, sizes 3/4" and up use clevis/cotter pins for containment. Open length estimated dependent on amount of full thread engagement at installation before take-up step. Proudly Serving istributors Since 1899

21 TURNUKLS TURNUKLS JW/JW esign: Jaw/Jaw UN 1045 arbon Steel Hot ipped Galvanized ITM NUMR FITTING SHNK IMTR () OY TK-UP () OL LOS () OL OPN (Ref.) RT PITY WIGHT/P. (pprox.) TJJ144 1/4" 4" 7-15/16" 12" 500 lbs..36 lbs. TJJ516 5/16" 4-1/2" 9-1/2" 14" 800 lbs..52 lbs. TJJ386 3/8" 6" 11-3/8" 18" 1,200 lbs..81 lbs. TJJ126 1/2" 6" 13" 20" 2,200 lbs lbs. TJJ129 1/2" 9" 16" 26" 2,200 lbs lbs. TJJ122 1/2" 12" 19" 32" 2,200 lbs lbs. TJJ586 5/8" 6" 14-7/8" 22" 3,500 lbs lbs. TJJ589 5/8" 9" 17-7/8" 28" 3,500 lbs lbs. TJJ581 5/8" 12" 20-7/8" 34" 3,500 lbs lbs. TJJ346 3/4" 6" 16-5/8" 25" 5,200 lbs lbs. TJJ349 3/4" 9" 19-5/8" 30" 5,200 lbs lbs. TJJ342 3/4" 12" 22-5/8" 36" 5,200 lbs lbs. TJJ348 3/4" 18" 28-5/8" 48" 5,200 lbs lbs. TJJ786 7/8" 6" 18-5/16" 25" 7,200 lbs lbs. TJJ782 7/8" 12" 24-5/6 38" 7,200 lbs lbs. TJJ788 7/8" 18" 30-5/16" 50" 7,200 lbs lbs. TJJ160 1" 6" 20" 29" 10,000 lbs lbs. TJJ112 1" 12" 26" 41" 10,000 lbs lbs. TJJ118 1" 18" 32" 52" 10,000 lbs lbs. TJJ124 1" 24" 38" 65" 10,000 lbs lbs. TJJ /4" 6" 24-1/2" 30" 15,200 lbs lbs. TJJ /4" 12" 29-1/2" 44" 15,200 lbs lbs. TJJ /4" 18" 35-1/2" 56" 15,200 lbs lbs. TJJ /4" 24" 41-1/2" 68" 15,200 lbs lbs. TJJ /2" 12" 31-1/2" 47" 21,400 lbs lbs. TJJ /2" 18" 37-1/2" 59" 21,400 lbs lbs. TJJ /2" 24" 43-1/2" 71" 21,400 lbs lbs. TJJ /4" 18" 41-3/16" 60" 28,000 lbs lbs. TJJ /4" 24" 47-3/16" 72" 28,000 lbs lbs. TJJ224 2" 24" 52-3/4" 78" 37,000 lbs lbs. TJJ /2" 24" 58-3/16" 82" 60,000 lbs lbs. TJJ /4" 24" 61-1/2" 85" 75,000 lbs lbs. Meets specifications FF-T-791b, Type 1, Form 1 - lass 7. MNUFTURING PILITIS Sawing Milling rilling Turning Laser utting Surface Grinding Tumbling TURNUKLS Turnbuckles are rated with full thread engagement. Use UTION to ensure proper installation. Rated capacity refers to a straight (zero degree) pull. Pulling at an angle reduces the rated capacity significantly. See page 5 for more information. Jaw ends through 5/8" use nut and bolt, sizes 3/4" and up use clevis/cotter pins for containment. Open length estimated dependent on amount of full thread engagement at installation before take-up step. huyett.com sales@huyett.com :2015 ISO RTIFI

22 TURNUKLS STINLSS STL TURNUKLS Y/JW esign: ye/jaw ast UN 304 Stainless Steel Polished ITM NUMR FITTING SHNK IMTR () OY TK-UP () OL LOS () OL OPN (Ref.) RT PITY WIGHT/P. (pprox.) STJ14 1/4" 4" 8-1/4" 12" 320 lbs..32 lbs. STJ56 5/16" 4-1/2" 9-9/16" 14" 500 lbs..47 lbs. STJ38 3/8" 6" 12-1/8" 18" 800 lbs..76 lbs. STJ12 1/2" 6" 14" 21" 1,400 lbs lbs. STJ58 5/8" 6" 15-9/16" 22" 2,240 lbs lbs. STJ34 3/4" 6" 17-5/8" 25" 4,000 lbs lbs. STINLSS STL TURNUKLS JW/JW esign: Jaw/Jaw ast UN 304 Stainless Steel Polished ITM NUMR FITTING SHNK IMTR () OY TK-UP () OL LOS () OL OPN (Ref.) RT PITY WIGHT/P. (pprox.) STJ14 1/4" 4" 8-1/4" 12" 320 lbs..36 lbs. STJ56 5/16" 4-1/2" 9-9/16" 14" 500 lbs..52 lbs. STJ38 3/8" 6" 12-1/8" 18" 800 lbs..81 lbs. STJ12 1/2" 6" 14" 21" 1,400 lbs lbs. STJ58 5/8" 6" 15-9/16" 22" 2,240 lbs lbs. STJ34 3/4" 6" 17-5/8" 25" 4,000 lbs lbs. huyett.com/myccount/orderhistory Order Status Order Tracking Info xpected Ship ate LL W ORRS OVR $ 100 * TURNUKLS Your Favorites Login or register to find your order and account information in one place. * Some xclusions pply 22 Turnbuckles are rated with full thread engagement. Use UTION to ensure proper installation. Rated capacity refers to a straight (zero degree) pull. Pulling at an angle reduces the rated capacity significantly. See page 5 for more information. Use of substandard components will reduce rated capacity. Open length estimated dependent on amount of full thread engagement at installation before take-up step. Proudly Serving istributors Since 1899

23 Flinthills Trading ompany d/b/a G.L. Huyett. This document may not be reproduced in whole or in part without the expressed written consent of G.L. Huyett. Standard split ring, 1" nominal PRPNL-625-Z-1 5/8 Hex /F Rev. ate omment rawn y: 5/8-11 UN Thread Installed Height PRPNL-625-Z-2 OM omercially available Z 1" split ring.1 ea. Pin, hardened to HRc PRPNL each See sht. 2 PRPNL each See sht. 3 pply Thread Locker at ssembly PRPNL each See sht. 4 PRPNL each See sht. 5 PRPNL-625-Z-4 PRPLN-625-Z-3 imension imension haracteristics HK Y Not rawn to Scale Part Number: MFG Q Part escription: Special Instructions: Sheet No. 1 of 5 P.O. ox 232 Minneapolis,Ks Rev. Tel: Fax: TURNUKLS TURNUKLS STU/STU esign: Material-ody: Material-Stubs: Stub/Stub UN 1045 arbon Steel arbon Steel Self-olored ITM NUMR FITTING SHNK IMTR () OY TK-UP () OL LOS () OL OPN (Ref.) RT PITY WIGHT/P. (pprox.) TSS144 1/4" 4" 9" 13" 500 lbs..27 lbs. TSS516 5/16" 4-1/2" 11" 15" 800 lbs..45 lbs. TSS386 3/8" 6" 14" 20" 1,200 lbs..75 lbs. TSS126 1/2" 6" 15" 21" 2,200 lbs lbs. TSS129 1/2" 9" 17" 26" 2,200 lbs lbs. TSS122 1/2" 12" 20" 32" 2,200 lbs lbs. TSS586 5/8" 6" 16" 22" 3,500 lbs lbs. TSS589 5/8" 9" 18" 27" 3,500 lbs lbs. TSS581 5/8" 12" 21" 33" 3,500 lbs lbs. TSS346 3/4" 6" 17" 23" 5,200 lbs lbs. TSS349 3/4" 9" 20" 28" 5,200 lbs lbs. TSS342 3/4" 12" 23" 35" 5,200 lbs lbs. TSS348 3/4" 18" 28" 46" 5,200 lbs lbs. TSS786 7/8" 6" 18" 26" 7,200 lbs lbs. TSS782 7/8" 12" 23" 35" 7,200 lbs lbs. TSS788 7/8" 18" 29" 47" 7,200 lbs lbs. TSS160 1" 6" 19" 25" 10,000 lbs lbs. TSS112 1" 12" 25" 37" 10,000 lbs lbs. TSS118 1" 18" 30" 48" 10,000 lbs lbs. TSS124 1" 24" 36" 60" 10,000 lbs lbs. TSS /4" 6" 20" 26" 15,200 lbs lbs. TSS /4" 12" 26" 38" 15,200 lbs lbs. TSS /4" 18" 32" 50" 15,200 lbs lbs. TSS /4" 24" 38" 62" 15,200 lbs lbs. TSS /2" 6" 20" 26" 21,400 lbs lbs. TSS /2" 12" 26-1/2" 39" 21,400 lbs lbs. TSS /2" 18" 33" 52" 21,400 lbs lbs. TSS /2" 24" 38" 62" 21,400 lbs lbs. TSS /4" 18" 34" 52" 28,000 lbs lbs. TSS /4" 24" 40" 64" 28,000 lbs lbs. TSS " 40" 64" 37,000 lbs lbs. TSS /2" 24" 40" 64" 60,000 lbs lbs. TSS /4" 24" 40" 64" 75,000 lbs lbs. Meets specifications FF-T-791b, Type 1, Form 1 - lass 3. SHOULR PTTRN Y OLT Thread Type: (UN, UNF, M, Metric/Pitch, etc.) arbon Steel 304 Stainless Steel PO# I: O: ustomer pproval: (signature) Name: Title: Today s ate: ate Required: Shank Length Thread Length Special Services: Heat Treating: Packaging: Other Requirements: G.L. Huyett iameter th St. Minneapolis, KS PH: Fax: ll prints must be signed and approved before production begins. 2. Specials cannot be returned. See terms and conditions on website. 3. Send completed prints to quotes@huyett.com USTOM SOLUTIONS Need a ustom Part? We have the experience, raw materials, and production services to cut, mill, drill, thread, plate, and finish parts to print. Visit huyett.com to find out what we can do for you. Visit huyett.com/customparts TURNUKLS Turnbuckles are rated with full thread engagement. Use UTION to ensure proper installation. Rated capacity refers to a straight (zero degree) pull. Pulling at an angle reduces the rated capacity significantly. See page 5 for more information. Use of substandard components will reduce rated capacity. Open length estimated dependent on amount of full thread engagement at installation before take-up step. huyett.com sales@huyett.com :2015 ISO RTIFI

24 TURNUKLS TURNUKLS - SLF-OLOR OIS esign: ody Only UN 1045 arbon Steel Self-olored ITM NUMR THR SIZ () OY TK-UP () LNGTH () RT PITY WIGHT/P. (pprox.) TS144 1/4" 4" 4-3/4" 500 lbs..15 lbs. TS516 5/16" 4-1/2" 5-1/2" 800 lbs..19 lbs. TS386 3/8" 6" 7-1/8" 1,200 lbs..29 lbs. TS126 1/2" 6" 7-1/2" 2,200 lbs..60 lbs. TS129 1/2" 9" 10-1/2" 2,200 lbs..68 lbs. TS122 1/2" 12" 13-1/2" 2,200 lbs lbs. TS586 5/8" 6" 7-7/8" 3,500 lbs..90 lbs. TS589 5/8" 9" 10-7/8" 3,500 lbs lbs. TS581 5/8" 12" 13-7/8" 3,500 lbs lbs. TS346 3/4" 6" 8-1/4" 5,200 lbs lbs. TS349 3/4" 9" 11-1/4" 5,200 lbs lbs. TS342 3/4" 12" 14-1/4" 5,200 lbs lbs. TS348 3/4" 18" 20-1/4" 5,200 lbs lbs. TS786 7/8" 6" 8-9/16" 7,200 lbs lbs. TS782 7/8" 12" 14-9/16" 7,200 lbs lbs. TS788 7/8" 18" 20-9/16" 7,200 lbs lbs. TS160 1" 6" 9" 10,000 lbs lbs. TS112 1" 12" 15" 10,000 lbs lbs. TS118 1" 18" 21" 10,000 lbs lbs. TS124 1" 24" 27" 10,000 lbs lbs. TS /8" 6" 9-1/8" 15,200 lbs lbs. TS /8" 12" 15-1/8" 15,200 lbs lbs. TS /4" 6" 9-1/8" 15,200 lbs lbs. TS /4" 12" 15-1/8" 15,200 lbs lbs. TS /4" 18" 21-1/8" 15,200 lbs lbs. TS /4" 24" 27-1/8" 15,200 lbs lbs. TS /2" 6" 9-3/4" 21,400 lbs lbs. TS /2" 12" 15-3/4" 21,400 lbs lbs. TS /2" 18" 21-3/4" 21,400 lbs lbs. TS /2" 24" 27-3/4" 21,400 lbs lbs. TS /4" 6" 11" 28,000 lbs lbs. TS /4" 18" 22-3/8" 28,000 lbs lbs. TS /4" 24" 28-3/8" 28,000 lbs lbs. TS224 2" 24" 29" 37,000 lbs lbs. TS /2" 24" 31-1/16" 60,000 lbs lbs. TS /4" 24" 31-1/16" 75,000 lbs lbs. Meets specifications STM F and Federal specification FF-T-791b, Type 1, Form 1 - lass 2. Your ccount Order History at huyett.com includes: TURNUKLS Order Status Order Tracking Info xpected Ship ate Your Favorites $ Quantity reaks ustomer Specific Pricing 24 Turnbuckles are rated with full thread engagement. Use UTION to ensure proper installation. Rated capacity refers to a straight (zero degree) pull. Pulling at an angle reduces the rated capacity significantly. See page 5 for more information. Use of substandard components will reduce rated capacity. Galvanized Turnbuckle odies have standard tap. Oversize tap available on most sizes. ontact sales@huyett.com for more details. Proudly Serving istributors Since 1899

25 TURNUKLS - HOT IPP GLVNIZ TURNUKLS OIS esign: ody Only UN 1045 arbon Steel Hot ipped Galvanized ITM NUMR THR SIZ () OY TK-UP () LNGTH () RT PITY WIGHT/P. (pprox.) TG144 1/4" 4" 4-3/4" 500 lbs..15 lbs. TG516 5/16" 4-1/2" 5-1/2" 800 lbs..19 lbs. TG386 3/8" 6" 7-1/8" 1,200 lbs..29 lbs. TG126 1/2" 6" 7-1/2" 2,200 lbs..60 lbs. TG129 1/2" 9" 10-1/2" 2,200 lbs..68 lbs. TG122 1/2" 12" 13-1/2" 2,200 lbs lbs. TG586 5/8" 6" 7-7/8" 3,500 lbs..90 lbs. TG589 5/8" 9" 10-7/8" 3,500 lbs lbs. TG581 5/8" 12" 13-7/8" 3,500 lbs lbs. TG346 3/4" 6" 8-1/4" 5,200 lbs lbs. TG349 3/4" 9" 11-1/4" 5,200 lbs lbs. TG342 3/4" 12" 14-1/4" 5,200 lbs lbs. TG348 3/4" 18" 20-1/4" 5,200 lbs lbs. TG786 7/8" 6" 8-9/16" 7,200 lbs lbs. TG782 7/8" 12" 14-9/16" 7,200 lbs lbs. TG788 7/8" 18" 20-9/16" 7,200 lbs lbs. TG160 1" 6" 9" 10,000 lbs lbs. TG112 1" 12" 15" 10,000 lbs lbs. TG118 1" 18" 21" 10,000 lbs lbs. TG124 1" 24" 27" 10,000 lbs lbs. TG /8" 6" 9-1/8" 15,200 lbs lbs. TG /4" 6" 9-1/8" 15,200 lbs lbs. TG /4" 12" 15-1/8" 15,200 lbs lbs. TG /4" 18" 21-1/8" 15,200 lbs lbs. TG /4" 24" 27-1/8" 15,200 lbs lbs. TG /2" 6" 9-3/4" 21,400 lbs lbs. TG /2" 12" 15-3/4" 21,400 lbs lbs. TG /2" 18" 21-3/4" 21,400 lbs lbs. TG /2" 24" 27-3/4" 21,400 lbs lbs. TG /4" 18" 22-3/8" 28,000 lbs lbs. TG /4" 24" 28-3/8" 28,000 lbs lbs. TG224 2" 24" 29" 37,000 lbs lbs. TG /2" 24" 31-1/16" 60,000 lbs lbs. TG /4" 24" 31-1/16" 75,000 lbs lbs. Meets specifications STM F and Federal specification FF-T-791b, Type 1, Form 1 - lass 2. Knowledge Vault iscover a wealth of information related to the manufacture and uses of fasteners, including product training, best practices, and the most comprehensive catalogs in the industry. * Some xclusions pply LL W ORRS OVR $ 100 * TURNUKLS Turnbuckles are rated with full thread engagement. Use UTION to ensure proper installation. Rated capacity refers to a straight (zero degree) pull. Pulling at an angle reduces the rated capacity significantly. See page 5 for more information. Use of substandard components will reduce rated capacity. Galvanized Turnbuckle odies have standard tap. Oversize tap available on most sizes. ontact sales@huyett.com for more details. huyett.com sales@huyett.com :2015 ISO RTIFI

26 TURNUKLS STINLSS STL TURNUKLS OIS esign: ody Only ast UN 304 Stainless Steel Polished ITM NUMR THR SIZ () OY TK-UP () LNGTH () RT PITY WIGHT/P. (pprox.) ST144 1/4" 4" 4-3/4" 320 lbs..15 lbs. ST516 5/16" 4-1/2" 5-1/2" 500 lbs..19 lbs. ST386 3/8" 6" 7-1/8" 800 lbs..29 lbs. ST126 1/2" 6" 7-1/2" 1,400 lbs..60 lbs. ST586 5/8" 6" 7-7/8" 2,240 lbs..90 lbs. ST346 3/4" 6" 8-1/4" 3,200 lbs lbs. ST786 7/8" 6" 8-9/16" 7,200 lbs lbs. ST160 1" 6" 9" 10,000 lbs lbs. imensional design per Federal specification FF-T-791b, Type 1, Grade 1. TURNUKL NS - HOT IPP GLVNIZ HOOK LFT HN ITM NUMR THR SIZ () FOR TK-UP () LHH144 1/4" 4" LHH386 3/8" 6" LHH122 1/2" 12" LHH126 1/2" 6" LHH516 1/2" 6" LHH129 1/2" 9" LHH581 5/8" 12" LHH586 5/8" 6" LHH589 5/8" 9" LHH348 3/4" 18" LHH346 3/4" 6" LHH349 3/4" 9" LHH782 7/8" 12" LHH124 1" 24" RIGHT HN ITM NUMR THR SIZ () FOR TK-UP () RHH144 1/4" 4" RHH516 5/16" 4.5" RHH386 3/8" 6" RHH122 1/2" 12" RHH126 1/2" 6" RHH129 1/2" 9" RHH581 5/8" 12" RHH586 5/8" 6" RHH342 3/4" 12" RHH348 3/4" 18" RHH346 3/4" 6" RHH782 7/8" 12" RHH112 1" 12" RHH124 1" 24" LSSS OF TURNUKLS Federal specification FF-T-971b defines performance requirements for Type 1, Form 1 turnbuckles in the following classes: TURNUKLS lass 1: Turnbuckle bodies without end pulls or threaded heads lass 2: Turnbuckle bodies without end pulls threaded with right and left hand heads 26 Turnbuckles are rated with full thread engagement. Use UTION to ensure proper installation. Rated capacity refers to a straight (zero degree) pull. Pulling at an angle reduces the rated capacity significantly. See page 5 for more information. Use of substandard components will reduce rated capacity. Proudly Serving istributors Since 1899

27 TURNUKL NS - HOT IPP GLVNIZ TURNUKLS Y LFT HN ITM NUMR THR SIZ () FOR TK-UP () LH144 1/4" 4" LH516 5/16" 4.5" LH386 3/8" 6" LH126 1/2" 6" LH129 1/2" 9" LH122 1/2" 12" LH589 5/8" 9" LH581 5/8" 12" LH342 3/4" 12" LH348 3/4" 18" LH346 3/4" 6" LH349 3/4" 9" LH782 7/8" 12" LH118 1" 18" LH124 1" 24" LH160 1" 6" LH /4" 12" LH /4" 24" LH /2" 12" LH /2" 18" LH /4" 18" LH /4" 24" LH /2" 24" RIGHT HN ITM NUMR THR SIZ () FOR TK-UP () RH144 1/4" 4" RH516 5/16" 4.5" RH386 3/8" 6" RH126 1/2" 6" RH129 1/2" 9" RH122 1/2" 12" RH581 5/8" 12" RH586 5/8" 6" RH589 5/8" 9" RH342 3/4" 12" RH348 3/4" 18" RH346 3/4" 6" RH349 3/4" 9" RH782 7/8" 12" RH786 7/8" 6" RH112 1" 12" RH124 1" 24" RH160 1" 6" RH /4" 12" RH /4" 18" RH /4" 24" RH /4" 18" RH /2" 24" STINLSS STL TURNUKL NS Y LFT HN ITM NUMR THR SIZ () FOR TK-UP () LH516-S 5/16" 4.5" LH386-S 3/8" 6" LH126-S 1/2" 6" LH346-S 3/4" 6" RIGHT HN ITM NUMR THR SIZ () FOR TK-UP () RH516-S 5/16" 4.5" RH126-S 1/2" 6" RH346-S 3/4" 6" lass 3: Stub/Stub lass 5: Hook/Hook lass 7: Jaw/Jaw lass 4: ye/ye lass 6: Hook/ye lass 8: Jaw/ye TURNUKLS huyett.com sales@huyett.com :2015 ISO RTIFI

28 TURNUKLS TURNUKL NS - HOT IPP GLVNIZ JW LFT HN ITM NUMR THR SIZ () FOR TK-UP () LHJ144 1/4" 4" LHJ516 5/16" 4.5" LHJ386 3/8" 6" LHJ126 1/2" 6" LHJ581 5/8" 12" LHJ586 5/8" 6" LHJ342 3/4" 12" LHJ346 3/4" 6" LHJ349 3/4" 9" LHJ782 7/8" 12" LHJ788 7/8" 18" LHJ786 7/8" 6" LHJ112 1" 12" LHJ118 1" 18" LHJ124 1" 24" LHJ160 1" 6" LHJ /4" 12" LHJ /2" 18" LHJ /2" 24" LHJ /4" 18" LHJ /4" 24" LHJ224 2" 24" LHJ /2" 24" Jaw nds are fitted with bolts and nuts for 1/4" to 5/8", and pins and cotters for 3/4" to 2-3/4" sizes. RIGHT HN ITM NUMR THR SIZ () FOR TK-UP () RHJ144 1/4" 4" RHJ386 3/8" 6" RHJ122 1/2" 12" RHJ126 1/2" 6" RHJ129 1/2" 9" RHJ581 5/8" 12" RHJ586 5/8" 6" RHJ589 5/8" 9" RHJ342 3/4" 12" RHJ348 3/4" 18" RHJ346 3/4" 6" RHJ349 3/4" 9" RHJ782 7/8" 12" RHJ788 7/8" 18" RHJ786 7/8" 6" RHJ112 1" 12" RHJ118 1" 18" RHJ124 1" 24" RHJ160 1" 6" RHJ /4" 12" RHJ /4" 18" RHJ /4" 24" RHJ /2" 18" RHJ /4" 18" RHJ /4" 24" RHJ224 2" 24" RHJ /2" 24" STINLSS STL TURNUKL NS JW LFT HN ITM NUMR THR SIZ () FOR TK-UP () LHJ386-S 3/8" 6" LHJ126-S 1/2" 6" RIGHT HN ITM NUMR THR SIZ () FOR TK-UP () RHJ126-S 1/2" 6" RHJ346-S 3/4" 6" TURNUKL NS OLT PINS TURNUKLS ITM NUMR THR SIZ TSP38 5/16" TSP12 3/8" TSP58 5/8" TSP34 3/4" TSP78 7/8" TSP01 1" 28 Proudly Serving istributors Since 1899

29 RO NS RO NS MHIN TO ORR lank / ustom Threaded 1045 arbon Steel Self-olored (other finishes available online) ITM NUMR SHNK IMTR () LNGTH (from enter of ye) () H IMTR () H THIKNSS() WIGHT/P. (pprox.) R0386 3/8" 6" 11/16" 7/16".24 lbs. R0126 1/2" 6" 15/16" 9/16".45 lbs. R0586 5/8" 6" 1-3/16" 11/16".72 lbs. R0582 5/8" 12" 1-3/16" 11/16" 1.30 lbs. R0346 3/4" 6" 1-7/16" 13/16" 1.10 lbs. R0342 3/4" 12" 1-7/16" 13/16" 1.97 lbs. R0786 7/8" 6" 1-11/16" 15/16" 1.60 lbs. R0782 7/8" 12" 1-11/16" 15/16" 2.60 lbs. R0012 1" 12" 2" 1" 3.50 lbs. R /4" 12" 2-1/2" 1-1/4" 5.70 lbs. RO NS Rod nds are available as blanks or custom made to order. ontact sales@huyett.com for more details. RWINGS VILL ON HUYTT.OM FOR USTOM PRTS LVIS N LVIS SSMLY RO NS PO# PO# PO# TP SIZ R / L Rod: X Thread Length HOL SIZ GRIP HOL SIZ Head iameter Head Thickness Shank iameter Turnbuckle Take-up: Rod: X Length (O) TP SIZ GRIP PINS Y / N TP SIZ R / L PINS Y / N Thread Length R / L GRIP HOL SIZ Pinhole / I Thread Length levis Size (circle): 2 2 1/ arbon Steel Special Services: Other Requirements: levis Size (circle): 2 2 1/2 3 levis 1045 arbon Steel Rod arbon Steel Rod: X Thread Length Special Services: Other Requirements: Thread Type: (UN, UNF, M, Metric/Pitch, etc.) arbon Steel Special Services: Heat Treating: Packaging: Other Requirements: ustomer pproval: Name: Title: Today s ate: ate Required: (signature) G.L. Huyett th St. Minneapolis, KS PH: Fax: ll prints must be signed and approved before production begins. 2. Specials cannot be returned. See terms and conditions on website. 3. Send completed prints to quotes@huyett.com ustomer pproval: (signature) G.L. Huyett th St. Name: Minneapolis, KS PH: Fax: Title: Today s ate: 1. ll prints must be signed and approved before production begins. 2. Specials cannot be returned. See terms and conditions on website. ate Required: 3. Send completed prints to quotes@huyett.com ustomer pproval: Name: Title: Today s ate: ate Required: (signature) G.L. Huyett th St. Minneapolis, KS PH: Fax: ll prints must be signed and approved before production begins. 2. Specials cannot be returned. See terms and conditions on website. 3. Send completed prints to quotes@huyett.com SHOULR PTTRN Y OLT PLIN PTTRN Y OLT PO# PO# I: I: Thread Length Thread Length O: iameter O: iameter Shank Length Shank Length Thread Type: (UN, UNF, M, Metric/Pitch, etc.) arbon Steel Special Services: Heat Treating: Packaging: Thread Type: (UN, UNF, M, Metric/Pitch, etc.) arbon Steel Special Services: Heat Treating: Packaging: 304 Stainless Steel Other Requirements: 304 Stainless Steel Other Requirements: ustomer pproval: Name: Title: (signature) G.L. Huyett th St. Minneapolis, KS PH: Fax: ustomer pproval: Name: Title: (signature) G.L. Huyett th St. Minneapolis, KS PH: Fax: Today s ate: ate Required: 1. ll prints must be signed and approved before production begins. 2. Specials cannot be returned. See terms and conditions on website. 3. Send completed prints to quotes@huyett.com Today s ate: ate Required: 1. ll prints must be signed and approved before production begins. 2. Specials cannot be returned. See terms and conditions on website. 3. Send completed prints to quotes@huyett.com Visit huyett.com sales@huyett.com :2015 ISO RTIFI

30 LVIS/YOKS JUSTL YOK NS G F H FORG G F H See Thread Pitch 1020 arbon Steel Self-olored (other finishes available online) LVIS/YOKS LFT HN RIGHT HN ITM NUMR THR WIGHT/P. () () () () () (F) (G) (H) PITH (pprox.) YK /4"-28 2" 7/16" 1-1/4" 9/32" 5/8" 1/4" 3/4" 1/2".07 lbs. YK /4"-20 2" 7/16" 1-1/4" 9/32" 5/8" 1/4" 3/4" 1/2".07 lbs. YK /16" /4" 1/2" 1-7/16" 11/32" 3/4" 5/16" 13/16" 19/32".10 lbs. YK /16" /4" 1/2" 1-7/16" 11/32" 3/4" 5/16" 13/16" 19/32".10 lbs. YK /8" /2" 5/8" 1-5/8" 7/16" 7/8" 3/8" 7/8" 11/16".17 lbs. YK /8" /2" 5/8" 1-5/8" 7/16" 7/8" 3/8" 7/8" 11/16".17 lbs. YK /2"-13 3" 13/16" 1-7/8" 9/16" 1-1/8" 1/2" 1-1/8" 15/16".32 lbs. YK /2"-20 3" 13/16" 1-7/8" 9/16" 1-1/8" 1/2" 1-1/8" 15/16".32 lbs. YK /8" /16" 1-1/16" 3-11/16" 11/16" 1-3/8" 5/8" 1-1/4" 1-3/16".80 lbs. YK /8" /16" 1-1/16" 3-11/16" 11/16" 1-3/8" 5/8" 1-1/4" 1-3/16".80 lbs. YK /4" /16" 1-1/4" 4-9/16" 13/16" 1-5/8" 3/4" 1-1/2" 1-7/16" 1.47 lbs. YK /4" /16" 1-1/4" 4-9/16" 13/16" 1-5/8" 3/4" 1-1/2" 1-7/16" 1.47 lbs. YK14-28-LH 1/4"-28 2" 7/16" 1-1/4" 9/32" 5/8" 1/4" 3/4" 1/2".07 lbs. YK14-20-LH 1/4"-20 2" 7/16" 1-1/4" 9/32" 5/8" 1/4" 3/4" 1/2".07 lbs. YK56-24-LH 5/16" /4" 1/2" 1-7/16" 11/32" 3/4" 5/16" 13/16" 19/32".10 lbs. YK56-18-LH 5/16" /4" 1/2" 1-7/16" 11/32" 3/4" 5/16" 13/16" 19/32".10 lbs. YK38-24-LH 3/8" /2" 5/8" 1-5/8" 7/16" 7/8" 3/8" 7/8" 11/16".17 lbs. YK38-16-LH 3/8" /2" 5/8" 1-5/8" 7/16" 7/8" 3/8" 7/8" 11/16".17 lbs. YK12-13-LH 1/2"-13 3" 13/16" 1-7/8" 9/16" 1-1/8" 1/2" 1-1/8" 15/16".32 lbs. YK12-20-LH 1/2"-20 3" 13/16" 1-7/8" 9/16" 1-1/8" 1/2" 1-1/8" 15/16".32 lbs. YK58-11-LH 5/8" /16" 1-1/16" 3-11/16" 11/16" 1-3/8" 5/8" 1-1/4" 1-3/16".80 lbs. YK58-18-LH 5/8" /16" 1-1/16" 3-11/16" 11/16" 1-3/8" 5/8" 1-1/4" 1-3/16".80 lbs. YK34-10-LH 3/4" /16" 1-1/4" 4-9/16" 13/16" 1-5/8" 3/4" 1-1/2" 1-7/16" 1.47 lbs. YK34-16-LH 3/4" /16" 1-1/4" 4-9/16" 13/16" 1-5/8" 3/4" 1-1/2" 1-7/16" 1.47 lbs. Meets specification S J493. levis pins sold separately. YOK PINS/LVIS PINS H M G Headed arbon Steel Self-olored (other finishes available online) ITM NUMR O () SHNK LNGTH (G) FFTIV LNGTH (M) WIGHT/ (pprox.) LP / 1/4" 7/8" 23/32" 1.50 lbs. LP / 5/16" 1" 3/4" 2.40 lbs. LP / 3/8" 1-3/32" 15/16" 4.00 lbs. LP / 1/2" 1-27/64" 1-3/16" 9.00 lbs. LP / 5/8" 1-3/4" 1-1/2" lbs. LP / 3/4" 2" 1-3/4" lbs. LP / 7/8" 2-1/2" 2-7/32" lbs. LP / 1" 2-5/8" 2-5/16" lbs. LP /4" 3" 2-7/8" lbs. LP /2" 3" 2-7/8" lbs. LP /4" 3" 2-7/8" lbs. 30 djustable Yoke nds produced to general industrial standards and dimensions. Proudly Serving istributors Since 1899

31 LNK LVISS LVIS/YOKS FORG 1020 arbon Steel Self-olored F ITM NUMR SIZ MX TP () MX PIN I. () MX GRIP () WITH () THR PTH () LNGTH (F) RT PITY WIGHT/P. (pprox.) LV002 #2 5/8" 3/4" 5/8" 1-1/16" 5/8" 4-1/2" 3,500 lbs lbs. LV025 #2-1/2 7/8" 1-1/2" 7/8" 1-1/4" 1-1/8" 5-1/8" 7,500 lbs lbs. LV003 #3 1-3/8" 1-3/4" 1-3/8" 1-1/2" 1-5/16" 6-5/16" 15,000 lbs lbs. Meets Federal specification (Type 14) and STM 668. FINISH LVISS - IN STOK FORG LH RH ITM NUMR SIZ TP () (Right/Left) GRIP () PIN HOL () PIN IMTR (Included) arbon Steel Self-olored RT PITY WIGHT/P. (pprox.) LV002-12FR #2 1/2"-13 RH 1/2" 9/16" 1/2" 3,500 lbs lbs. LV002-58FR #2 5/8"-11 RH 5/8" 11/16" 5/8" 3,500 lbs lbs. LV025-34FR #2-1/2 3/4"-10 RH 3/4" 13/16" 3/4" 7,500 lbs lbs. LV003-01FR #3 1"-8 RH 1" 1-1/16" 1" 15,000 lbs lbs. LV002-12FL #2 1/2"-13 LH 1/2" 9/16" 1/2" 3,500 lbs lbs. LV002-58FL #2 5/8"-11 LH 5/8" 11/16" 5/8" 3,500 lbs lbs. LV025-34FL #2-1/2 3/4"-10 LH 3/4" 13/16" 3/4" 7,500 lbs lbs. LV003-01FL #3 1"-8 LH 1" 1-1/16" 1" 15,000 lbs lbs. LVIS/YOKS Shipped with appropriate headed clevis pin and cotter pin. G.L. HUYTT PINS TLOG Includes a complete line of levis, Three-Point, Positive Lock, otter, Hitch Pin lips, Wire Forms, owel, Grooved, Spring, Taper, and More 274 pages! Over 14,000 pins and wire forms in every size and shape you can imagine in a wide range of materials in both inch and metric sizes. vailable in low quantities and assortments. We ve also included specifications and technical data to help you choose the right part for your application. Visit huyett.com to request or download a copy today. Rated capacity refers to a straight (zero degree) pull. Pulling at an angle reduces the rated capacity significantly. See page 5 for more information. Use of substandard components will reduce rated capacity. huyett.com sales@huyett.com :2015 ISO RTIFI

32 SHKLS/HOOKS STINLSS STL SWIVL Y/Y esign: ye/ye ast 304 Stainless Steel Polished ITM NUMR SIZ TOTL LNGTH () WITH () RT PITY WIGHT/P. (pprox.) SS316 3/16" 2-5/16" 7/8" 300 lbs..08 lbs. SS014 1/4" 2-9/16" 1-1/4" 600 lbs..11 lbs. SS516 5/16" 3-5/8" 1-3/8" 1,100 lbs..26 lbs. SS038 3/8" 4-5/8" 1-11/16" 1,540 lbs..55 lbs. SS012 1/2" 6" 1-15/16" 2,640 lbs lbs. SWIVL Y/Y esign: ye Nut with Welded Stud 1045 arbon Steel Hot ipped Galvanized SHKLS/HOOKS ITM NUMR SIZ Y LNGTH () Y WITH () RT PITY WIGHT/P. (pprox.) SWV014 1/4" 1-11/16" 1-1/4" 850 lbs..21 lbs. SWV516 5/16" 2-1/16" 1-5/8" 1,250 lbs..39 lbs. SWV038 3/8" 2-1/2" 2 2,250 lbs..75 lbs. SWV012 1/2" 3-3/16" 2-1/2" 3,600 lbs lbs. SWV058 5/8" 3-7/8" 3 5,200 lbs lbs. SWV034 3/4" 4-5/16" 3-1/2" 7,200 lbs lbs. Meets specification RR--271d Type VII - lass 2. For I or other measurements see Lifting ye Nuts on page 10. Minimum breaking strength is 5x the rated capacity. SWIVL Y/JW esign: ye Nut/ Jaws with Welded Stud 1045 arbon Steel Hot ipped Galvanized ITM NUMR SIZ Y LNGTH () JW LNGTH () Y WITH () JW WITH () RT PITY WIGHT/P. (pprox.) SWV014-J 1/4" 1-11/16" 1-9/16" 1-1/4" 1-1/32" 850 lbs..21 lbs. SWV516-J 5/16" 2-1/16" 1-13/16" 1-5/8" 1-1/8" 1,250 lbs..39 lbs. SWV038-J 3/8" 2-1/2" 2-1/4" 2" 1-7/16" 2,250 lbs..75 lbs. SWV012-J 1/2" 3-3/16" 2-7/8" 2-1/2" 1-3/4" 3,600 lbs lbs. SWV058-J 5/8" 3-7/8" 3-15/32" 3" 2-1/16" 5,200 lbs lbs. Meets specification RR--271d Type VII - lass 3. For I or other measurements see Lifting ye Nuts on page 10. Minimum breaking strength is 5x the rated capacity. 32 See Safe Lifting hart on page 5. ll rated capacities consider a straight vertical lift. Use UTION when lifting. ny angle beyond vertical (zero degree) will reduce the Rated apacity. Proudly Serving istributors Since 1899

33 NHOR SHKLS - HOT IPP GLVNIZ SHKLS/HOOKS ROUN PIN esign: Round Pin 1045 arbon Steel Hot ipped Galvanized ITM NUMR SIZ PIN IMTR () OVRLL HIGHT () INSI HIGHT () INSI MX I () RT PITY (lbs.) (tons) WIGHT/P. (pprox.) RPS316 3/16" 1/4" 1-1/2" 7/8" 11/16" 660 lbs..33 tons.06 lbs. RPS014 1/4" 5/16" 1-13/16" 1-1/8" 27/32" 1,000 lbs..50 tons.13 lbs. RPS516 5/16" 3/8" 2-1/16" 1-7/32" 13/16" 1,500 lbs..75 tons.17 lbs. RPS038 3/8" 7/16" 2-1/2" 1-7/16" 1-1/32" 2,000 lbs tons.25 lbs. RPS012 1/2" 5/8" 3-1/4" 1-7/8" 1-5/16" 4,000 lbs tons.70 lbs. RPS058 5/8" 3/4" 4-3/16" 2-3/8" 1-11/16" 6,500 lbs tons 1.50 lbs. RPS034 3/4" 7/8" 5" 2-13/16" 2" 9,500 lbs tons 2.30 lbs. RPS078 7/8" 1" 5-13/16" 3-5/16" 2-17/32" 13,000 lbs tons 3.40 lbs. RPS001 1" 1-1/8" 6-9/16" 3-3/4" 2-11/16" 17,000 lbs tons 5.00 lbs. RPS /4" 1-3/8" 8-1/4" 4-11/16" 3-1/4" 24,000 lbs tons 9.80 lbs. RPS /2" 1-3/4" 10" 5-3/4" 3-7/8" 34,000 lbs tons lbs. RPS002 2" 2-1/4" 13-11/16" 7-3/4" 5-3/4" 70,000 lbs tons lbs. Meets specification RR--271d Type IV, Grade - lass 1. Safety factor is 2x the Rated apacity. Minimum breaking strength is 6x Rated apacity. NHOR SHKLS - SLF-OLOR SRW PIN ITM NUMR SIZ PIN IMTR () OVRLL HIGHT () INSI HIGHT () INSI MX I () esign: RT PITY (lbs.) Screw Pin 1045 arbon Steel Self-olored (tons) WIGHT/P. (pprox.) SPS316 3/16" 1/4" 1-1/2" 7/8" 11/16" 660 lbs..33 tons.06 lbs. SPS014 1/4" 5/16" 1-13/16" 1-1/8" 27/32" 1,000 lbs..50 tons.12 lbs. SPS516 5/16" 3/8" 2-1/16" 1-7/32" 13/16" 1,500 lbs..75 tons.18 lbs. SPS038 3/8" 7/16" 2-1/2" 1-7/16" 1-1/32" 2,000 lbs tons.31 lbs. SPS716 7/16" 1/2" 2-15/16" 1-11/16" 1-3/16" 3,000 lbs tons.45 lbs. SPS012 1/2" 5/8" 3-1/4" 1-7/8" 1-5/16" 4,000 lbs tons.75 lbs. SPS058 5/8" 3/4" 4-3/16" 2-3/8" 1-11/16" 6,500 lbs tons 1.20 lbs. SPS034 3/4" 7/8" 5" 2-13/16" 2" 9,500 lbs tons 2.14 lbs. SPS078 7/8" 1" 5-13/16" 3-5/16" 2-17/32" 13,000 lbs tons 3.46 lbs. SPS001 1" 1-1/8" 6-9/16" 3-3/4" 2-11/16" 17,000 lbs tons 5.00lbs. SHKLS/HOOKS Meets specification RR--271d, Type IV, Grade - lass 2. Safety factor is 2x the rated capacity. Minimum breaking strength is 6x rated capacity. See Safe Lifting hart on page 5. ll rated capacities consider a straight vertical lift. Use UTION when lifting. ny angle beyond vertical (zero degree) will reduce the rated capacity. huyett.com sales@huyett.com :2015 ISO RTIFI

34 SHKLS/HOOKS NHOR SHKLS - HOT IPP GLVNIZ esign: SRW PIN Screw Pin 1045 arbon Steel Hot ipped Galvanized ITM NUMR SIZ PIN IMTR () OVRLL HIGHT () INSI HIGHT () INSI MX I () RT PITY (lbs.) (tons) WIGHT/P. (pprox.) SPG316 3/16" 1/4" 1-1/2" 7/8" 11/16" 660 lbs..33 tons.06 lbs. SPG014 1/4" 5/16" 1-13/16" 1-1/8" 27/32" 1,000 lbs..50 tons.12 lbs. SPG516 5/16" 3/8" 2-1/16" 1-7/32" 13/16" 1,500 lbs..75 tons.18 lbs. SPG038 3/8" 7/16" 2-1/2" 1-7/16" 1-1/32" 2,000 lbs tons.31 lbs. SPG716 7/16" 1/2" 2-15/16" 1-11/16" 1-3/16" 3,000 lbs tons.45 lbs. SPG012 1/2" 5/8" 3-1/4" 1-7/8" 1-5/16" 4,000 lbs tons.75 lbs. SPG058 5/8" 3/4" 4-3/16" 2-3/8" 1-11/16" 6,500 lbs tons 1.20 lbs. SPG034 3/4" 7/8" 5" 2-13/16" 2" 9,500 lbs tons 2.14 lbs. SPG078 7/8" 1" 5-13/16" 3-5/16" 2-17/32" 13,000 lbs tons 3.46 lbs. SPG001 1" 1-1/8" 6-9/16" 3-3/4" 2-11/16" 17,000 lbs tons 5.00lbs. SPG /8" 1-1/4" 7-1/2" 4-1/4" 2-29/32" 19,000 lbs tons 7.10 lbs. SPG /4" 1-3/8" 8-1/4" 4-11/16" 3-1/4" 24,000 lbs tons 9.90 lbs. SPG /8" 1-1/2" 10" 5-1/4" 3-5/8" 27,000 lbs tons lbs. SPG /2" 1-3/4" 10" 5-3/4" 3-7/8" 34,000 lbs tons lbs. SPG /4" 2" 12-3/8" 7" 5" 50,000 lbs tons lbs. SPG002 2" 2-1/4" 13-11/16" 7-3/4" 5-3/4" 70,000 lbs tons lbs. SPG /2" 2-3/4" 19-1/16" 10-1/2" 7-3/4" 110,000 lbs tons lbs. SPG003 3" 3-5/16" 21-1/2" 13" 7-7/8" 170,000 lbs tons lbs. Meets specification RR--271d, Type IV, Grade - lass 2. Safety factor is 2x the rated capacity. Minimum breaking strength is 6x rated capacity. SHKLS/HOOKS STINLSS STL NHOR SHKLS esign: SRW PIN Screw Pin ast UN 304 Stainless Steel Polished ITM NUMR SIZ PIN IMTR () OVRLL HIGHT () INSI HIGHT () INSI MX I () RT PITY WIGHT/P. (pprox.) SSP316 3/16" 1/4" 1-1/2" 7/8" 11/16" 300 lbs..06 lbs. SSP014 1/4" 5/16" 1-13/16" 1-1/8" 27/ lbs..12 lbs. SSP516 5/16" 3/8" 2-1/16" 1-7/32 13/16" 650 lbs..18 lbs. SSP038 3/8" 7/16" 2-1/2" 1-7/16" 1-1/32 1,000 lbs..31 lbs. SSP012 1/2" 5/8" 3-1/4" 1-7/8" 1-5/16" 1,990 lbs..75 lbs. SSP058 5/8" 3/4" 4-3/16" 2-3/8" 1-11/16" 3,050 lbs lbs. SSP034 3/4" 7/8" 5" 2-13/16" 2" 4,475 lbs lbs. SSP078 7/8" 1" 5-13/16" 3-5/16" 2-17/32 6,000 lbs lbs. SSP001 1" 1-1/8" 6-9/16" 3-3/4" 2-11/16" 7,950 lbs lbs. 34 See Safe Lifting hart on page 5. ll rated capacities consider a straight vertical lift. Use UTION when lifting. ny angle beyond vertical (zero degree) will reduce the rated capacity. Proudly Serving istributors Since 1899

35 NHOR SHKLS SHKLS/HOOKS SFTY OLT esign: Safety olt 1045 arbon Steel Hot ipped Galvanized ITM NUMR SIZ PIN IMTR () OVRLL HIGHT () INSI HIGHT () INSI MX I () RT PITY (lbs.) (tons) WIGHT/P. (pprox.) ST014 1/4" 5/16" 1-13/16" 1-1/8" 27/32" 1,000 lbs..50 tons.13 lbs. ST516 5/16" 3/8" 2-1/16" 1-7/32 13/16" 1,500 lbs..75 tons.17 lbs. ST038 3/8" 7/16" 2-1/2" 1-7/16" 1-1/32" 2,000 lbs tons.25 lbs. ST716 7/16" 1/2" 2-15/16" 1-11/16" 1-3/16" 3,000 lbs tons.40 lbs. ST012 1/2" 5/8" 3-1/4" 1-7/8" 1-5/16" 4,000 lbs tons.70 lbs. ST058 5/8" 3/4" 4-3/16" 2-3/8" 1-11/16" 6,500 lbs tons 1.50 lbs. ST034 3/4" 7/8" 5" 2-13/16" 2" 9,500 lbs tons 2.30 lbs. ST078 7/8" 1" 5-13/16" 3-5/16" 2-17/32 13,000 lbs tons 3.46 lbs. ST001 1" 1-1/8" 6-9/16" 3-3/4" 2-11/16" 17,000 lbs tons 5.00 lbs. ST /8" 1-1/4" 7-1/2" 4-1/4" 2-29/32 19,000 lbs tons 7.00 lbs. ST /4" 1-3/8" 8-1/4" 4-11/16" 3-1/4" 24,000 lbs tons 9.80 lbs. ST /8" 1-1/2" 10" 5-1/4" 3-5/8" 27,000 lbs tons lbs. ST /2" 1-3/4" 10" 5-3/4" 3-7/8" 34,000 lbs tons lbs. ST /4" 2" 12-3/8" 7" 5" 50,000 lbs tons lbs. ST002 2" 2-1/4" 13-11/16" 7-3/4" 5-3/4" 70,000 lbs tons lbs. ST /2" 2-3/4" 19-1/16" 10-1/2" 7-3/4" 110,000 lbs tons lbs. ST003 3" 3-5/16" 21-1/2" 13" 7-7/8" 170,000 lbs tons lbs. Meets specification RR--271d, Type IV, Grade - lass 3. Safety factor is 2x the rated capacity. Minimum breaking strength is 6x rated capacity. STINLSS STL NHOR SHKLS esign: SFTY OLT Safety olt ast 304 Stainless Steel Polished SHKLS/HOOKS ITM NUMR SIZ PIN IMTR () OVRLL HIGHT () INSI HIGHT () INSI MX I () RT PITY WIGHT/P. (pprox.) SST14 1/4" 5/16" 1-13/16" 1-1/8" 27/32" 450 lbs..13 lbs. SST56 5/16" 3/8" 2-1/16" 1-7/32" 13/16" 650 lbs..17 lbs. SST38 3/8" 7/16" 2-1/2" 1-7/16" 1-1/32" 1,000 lbs..25 lbs. SST12 1/2" 5/8" 3-1/4" 1-7/8" 1-5/16" 1,990 lbs..40 lbs. SST58 5/8" 3/4" 4-3/16" 2-3/8" 1-11/16" 3,050 lbs lbs. SST34 3/4" 7/8" 5" 2-13/16" 2" 4,475 lbs lbs. SST78 7/8" 1" 5-13/16" 3-5/16" 2-17/32" 6,000 lbs lbs. SST01 1" 1-1/8" 6-9/16" 3-3/4" 2-11/16" 7,950 lbs lbs. See Safe Lifting hart on page 5. ll rated capacities consider a straight vertical lift. Use UTION when lifting. ny angle beyond vertical (zero degree) will reduce the rated capacity. huyett.com sales@huyett.com :2015 ISO RTIFI

36 SHKLS/HOOKS HIN SHKLS SRW PIN esign: Screw Pin 1045 arbon Steel Hot ipped Galvanized ITM NUMR SIZ PIN IMTR () OVRLL HIGHT () INSI HIGHT () INSI MX I () RT PITY (lbs.) (tons) WIGHT/P. (pprox.) SP014 1/4" 5/16" 1-9/16" 7/8" 15/32" 1,000 lbs..50 tons.11 lbs. SP516 5/16" 3/8" 2-15/16" 1-1/32" 17/32" 1,500 lbs..75 tons.17 lbs. SP038 3/8" 7/16" 2-5/16" 1-1/4" 11/16" 2,000 lbs tons.24 lbs. SP716 7/16" 1/2" 2-11/16" 1-7/16" 3/4" 3,000 lbs tons.40 lbs. SP012 1/2" 5/8" 3-1/32" 1-5/8" 13/16" 4,000 lbs tons.59 lbs. SP058 5/8" 3/4" 3-3/4" 2" 1-1/16" 6,500 lbs tons 1.21 lbs. SP034 3/4" 7/8" 4-17/32" 2-3/8" 1-1/4" 9,500 lbs tons 2.25 lbs. SP078 7/8" 1" 5-1/3" 2-13/16" 1-7/16" 13,000 lbs tons 3.16 lbs. SP001 1" 1-1/8" 5-15/16" 3-3/16" 1-11/16" 17,000 lbs tons 4.47 lbs. SP /8" 1-1/4" 6-7/8" 3-9/16" 1-25/32" 19,000 lbs tons 6.75 lbs. SP /4" 1-3/8" 7-1/2" 3-15/16" 2-1/32" 24,000 lbs tons 9.06 lbs. SP /2" 1-3/4" 9-1/16" 4-13/16" 2-3/8" 34,000 lbs tons lbs. SP /4" 2" 11" 5-3/4" 2-7/8" 50,000 lbs tons lbs. SP002 2" 2-1/4" 12-3/4" 6-3/4" 3-1/4" 70,000 lbs tons lbs. SP /2" 2-3/4" 15-1/8" 8" 3-25/32" 110,000 lbs tons lbs. Meets specification RR--271d, Type IV - lass 2. Safety factor is 2x the rated capacity. Minimum breaking strength is 6x rated capacity. SHKLS/HOOKS STINLSS STL HIN SHKLS esign: Thread: SRW PIN Screw Pin ast UN 304 Stainless Steel Polished ITM NUMR SIZ PIN IMTR () OVRLL HIGHT () INSI HIGHT () INSI MX I () RT PITY WIGHT/P. (pprox.) SSP16 3/16" 1/4" 1-1/4" 3/4" 3/8" 300 lbs..04 lbs. SSP14 1/4" 5/16" 1-9/16" 7/8" 15/32" 450 lbs..11 lbs. SSP56 5/16" 3/8" 1-15/16" 1-1/32" 17/32" 650 lbs..17 lbs. SSP38 3/8" 7/16" 2-5/16" 1-1/4" 11/16" 1,000 lbs..24 lbs. SSP12 1/2" 5/8" 3-1/32" 1-5/8" 13/16" 1,990 lbs..59 lbs. 36 See Safe Lifting hart on page 5. ll rated capacities consider a straight vertical lift. Use UTION when lifting. ny angle beyond vertical (zero degree) will reduce the rated capacity. Proudly Serving istributors Since 1899

37 OUL LVIS LINK SHKLS/HOOKS TWIN esign: ouble levis with Pins 1045 arbon Steel Zinc ITM NUMR HIN SIZ INSI LNGTH* () INSI WITH () OL () RT PITY WIGHT/P. (pprox.) L014 1/4" - 5/16" 1-3/16" 15/32" 2-1/2" 4,700 lbs..40 lbs. L038 3/8" 1-3/8" 17/32" 2-7/8" 6,600 lbs..70 lbs. L012 7/16" - 1/2" 1-9/16" 21/32" 3-3/4" 11,250 lbs lbs. L058 5/8" 2-1/4" 25/32" 4-1/2" 16,500 lbs lbs. Minimum breaking strength is 4x the rated capacity. * Inside length is measured from pin to pin. MSTR LINK PR SHP esign: Weldless/Pear Shaped 1045 arbon Steel Painted Red ITM NUMR SIZ INSI LNGTH () INSI WITH SMLL N () INSI WITH LRG N () RT PITY WIGHT/P. (pprox.) MLP038 3/8" 2-1/4" 3/4" 1-1/2" 1,600 lbs..23 lbs. MLP012 1/2" 3" 1" 2" 2,900 lbs..55 lbs. MLP058 5/8" 3-3/4" 1-1/4" 2-1/2" 4,200 lbs lbs. MLP034 3/4" 4-1/2" 1-1/2" 3" 6,000 lbs lbs. MLP078 7/8" 5-1/4" 1-3/4" 3-1/2" 8,300 lbs lbs. MLP001 1" 6" 2" 4" 10,800 lbs lbs. MLP /4" 7-3/4" 2-1/2" 5" 16,750 lbs lbs. Minimum breaking strength is 5x the rated capacity. LLOY MSTR LINK OLONG SHKLS/HOOKS esign: Weldless/Oblong lloy Steel Painted Red ITM NUMR SIZ INSI LNGTH () INSI WITH () RT PITY WIGHT/P. (pprox.) MLO012 1/2" 5" 2-1/2" 4,100 lbs..89 lbs. MLO058 5/8" 6" 3" 5,500 lbs lbs. MLO034 3/4" 5-1/2" 2-3/4" 8,600 lbs lbs. MLO001 1" 7" 3-1/2" 20,300 lbs lbs. MLO /4" 8-3/4" 4-3/8" 29,300 lbs lbs. MLO /2" 10-1/2" 5-1/4" 39,900 lbs lbs. Minimum breaking strength is 6x the rated capacity. See Safe Lifting hart on page 5. ll rated capacities consider a straight vertical lift. Use UTION when lifting. ny angle beyond vertical (zero degree) will reduce the rated capacity. huyett.com sales@huyett.com :2015 ISO RTIFI

38 SHKLS/HOOKS Y GR HOOK GR 43 esign: ye 1045 arbon Steel Self-olored ITM NUMR HIN SIZ INSI LNGTH () INSI WITH () RT PITY WIGHT/P. (pprox.) HG014 1/4" 1-31/32" 3/8" 2,600 lbs..40 lbs. HG516 5/16" 2-1/4" 7/16" 3,900 lbs..79 lbs. HG038 3/8" 2-9/16" 1/2" 5,400 lbs lbs. HG716 7/16" 2-3/4" 9/16" 7,200 lbs lbs. HG012 1/2" 3-3/32" 21/32" 9,200 lbs lbs. HG058 5/8" 4-1/16" 25/32" 12,750 lbs lbs. HG034 3/4" 4-9/16" 15/16" 18,500 lbs lbs. Minimum breaking strength is 4x Rated apacity. LVIS GR HOOK GR 43 esign: levis 1045 arbon Steel Self-olored SHKLS/HOOKS ITM NUMR HIN SIZ INSI LNGTH () INSI WITH () RT PITY WIGHT/P. (pprox.) HG014 1/4" 1-31/32" 3/8" 2,600 lbs..40 lbs. HG516 5/16" 2-1/4" 7/16" 3,900 lbs..79 lbs. HG038 3/8" 2-9/16" 1/2" 5,400 lbs lbs. HG716 7/16" 2-3/4" 9/16" 7,200 lbs lbs. HG012 1/2" 3-3/32" 21/32" 9,200 lbs lbs. HG058 5/8" 4-1/16" 25/32" 12,750 lbs lbs. HG034 3/4" 4-9/16" 15/16" 18,500 lbs lbs. Minimum breaking strength is 4x rated capacity. LVIS GR HOOK GR 70 esign: levis lloy Steel Hook Zinc Yellow ITM NUMR HIN SIZ INSI LNGTH () INSI WITH () RT PITY WIGHT/P. (pprox.) HG516-G7 5/16" 2-1/4" 7/16" 4,700 lbs..79 lbs. HG038-G7 3/8" 2-9/16" 1/2" 6,600 lbs lbs. Rated capacity relates to the chain capacity. The capacity/strength of the attachment component must be considered. 38 See Safe Lifting hart on page 5. ll rated capacities consider a straight vertical lift. Use UTION when lifting. ny angle beyond vertical (zero degree) will reduce the rated capacity. Proudly Serving istributors Since 1899

39 SHKLS/HOOKS Y SLIP HOOK GR 43 esign: ye 1045 arbon Steel Self-olored ITM NUMR HIN SIZ INSI LNGTH () INSI WITH () RT PITY WIGHT/P. (pprox.) HS014 1/4" 2-9/16" 7/8" 1,950 lbs..50 lbs. HS516 5/16" 2-7/8" 1" 2,875 lbs..75 lbs. HS038 3/8" 3-1/4" 1-1/16" 4,000 lbs lbs. HS716 7/16" 3-23/32" 1-1/4" 5,000 lbs lbs. HS012 1/2" 4" 1-15/32" 6,500 lbs lbs. HS058 5/8" 4-31/32" 1-3/4" 9,250 lbs lbs. HS034 3/4" 6-1/16" 2-7/32" 12,500 lbs lbs. Minimum breaking strength is 4x rated capacity. Inside width dimension is approximate due to hook design. LVIS SLIP HOOK GR 43 esign: levis 1045 arbon Steel Self-olored ITM NUMR HIN SIZ INSI LNGTH () INSI WITH () RT PITY WIGHT/P. (pprox.) HS014 1/4" 2-9/16" 7/8" 1,950 lbs..50 lbs. HS516 5/16" 2-7/8" 1" 2,875 lbs..75 lbs. HS038 3/8" 3-1/4" 1-1/16" 4,000 lbs lbs. HS716 7/16" 3-23/32" 1-1/4" 5,000 lbs lbs. HS012 1/2" 4" 1-15/32" 6,500 lbs lbs. HS058 5/8" 4-31/32" 1-3/4" 9,250 lbs lbs. HS034 3/4" 6-1/16" 2-7/32" 12,500 lbs lbs. Minimum breaking strength is 4x rated capacity. Inside width dimension is approximate due to hook design. SHKLS/HOOKS LVIS SLIP HOOK GR 70 esign: levis lloy Steel Hook Zinc Yellow ITM NUMR HIN SIZ INSI LNGTH () INSI WITH () RT PITY WIGHT/P. (pprox.) HS516-G7 5/16" 2-7/8" 1" 4,700 lbs..75 lbs. HS038-G7 3/8" 3-1/4" 1-1/16" 6,600 lbs lbs. See Safe Lifting hart on page 5. ll rated capacities consider a straight vertical lift. Use UTION when lifting. ny angle beyond vertical (zero degree) will reduce the rated capacity. huyett.com sales@huyett.com :2015 ISO RTIFI

40 SHKLS/HOOKS LVIS SLIP HOOK W/ SFTY LTH GR 43 esign: Material-Hook: Material-Latch: levis with Latch 1045 arbon Steel Stainless Steel Zinc ITM NUMR HIN SIZ INSI LNGTH () INSI WITH () RT PITY WIGHT/P. (pprox.) HS014 - L 1/4" 2-9/16" 7/8" 1,950 lbs..50 lbs. HS516 - L 5/16" 2-7/8" 1" 2,875 lbs..75 lbs. HS038 - L 3/8" 3-1/4" 1-1/16" 4,000 lbs lbs. HS012 - L 1/2" 4" 1-15/32" 6,500 lbs lbs. Minimum breaking strength is 4x rated capacity. Inside width dimension is approximate due to hook design. LVIS SLIP HOOK W/ SFTY LTH GR 70 esign: Material-Hook: Material-Latch: levis with Latch lloy Steel Stainless Steel Zinc Yellow SHKLS/HOOKS ITM NUMR HIN SIZ INSI LNGTH () INSI WITH () LSO VILL T HUYTT.OM RT PITY WIGHT/P. (pprox.) HS516-G7L 5/16" 2-7/8" 1" 4,700 lbs..75 lbs. HS038-G7L 3/8" 3-1/4" 1-1/16" 6,600 lbs lbs. Minimum breaking strength is 4x rated capacity. Inside width dimension is approximate due to hook design. Grease Fittings & ccessories Machine Keys & Key Stock Pins & Wire Forms ngineered Fasteners lind Threaded Inserts Wave & Spring Washers Hose lamps on t see what you re looking for? Give our Sales Team a call today See Safe Lifting hart on page 5. ll rated capacities consider a straight vertical lift. Use UTION when lifting. ny angle beyond vertical (zero degree) will reduce the rated capacity. Proudly Serving istributors Since 1899

41 HIN - PROOF OIL ROP/HIN HRWR GR 30 esign: Proof oil/nm96 Welded link arbon Steel Zinc ITM NUMR HIN SIZ FOOT/PIL LINK IMNSIONS I LNGTH WITH RT PITY WIGHT/100 FT. (pprox.) P316-P 3/16" 250'.98".30" 750 lbs lbs. P014-P 1/4" 141' 1.24".38" 1,250 lbs lbs. P516-P 5/16" 92' 1.29".44" 1,900 lbs lbs. P038-P 3/8" 63' 1.38".55" 2,650 lbs lbs. HIN INRS GR 70 esign: Grade 70 Welded link arbon Steel Zinc Yellow ITM NUMR SIZ LNGTH RT PITY WIGHT/P. (pprox.) G /16" 15' 4,700 lbs lbs. G /16" 20' 4,700 lbs lbs. G /8" 20' 6,600 lbs lbs. Grade 70 chain meets OT requirements with zinc yellow finish. ach assembly has a clevis grab hook on both ends. hains can be easily adjusted, or cut to size, using the same hooks for special applications. HIN RPIR LINK GR 30 Steel Zinc ITM NUMR HIN SIZ LNGTH () WIGHT/P. (pprox.) RL018 1/8" 3/4".01 lbs. OL SHUT Steel Zinc RL316 3/16" 1".01 lbs. RL014 1/4" 1-1/4".03 lbs. RL516 5/16" 1-1/2".06 lbs. RL038 3/8" 1-5/8".10 lbs. RL012 1/2" 2-1/2".26 lbs. ITM NUMR HIN SIZ RT PITY GR 30 WIGHT/P. (pprox.) S316 3/16" 450 lbs..01 lbs. S014 1/4" 800 lbs..03 lbs. S516 5/16" 1,300 lbs..06 lbs. S038 3/8" 1,900 lbs..10 lbs. S716 7/16" 2,500 lbs..20 lbs. S012 1/2" 3,700 lbs..26 lbs. S058 5/8" 6,900 lbs..70 lbs. ROP/HIN HRWR See Safe Lifting hart on page 5. ll rated capacities consider a straight vertical lift. Use UTION when lifting. ny angle beyond vertical (zero degree) will reduce the rated capacity. hain repair and cold shut links are not recommended for lifting applications. huyett.com sales@huyett.com :2015 ISO RTIFI

42 ROP/HIN HRWR HOOKS SNP esign: Standard uty ent/ssembled arbon Steel Zinc ITM NUMR SIZ/ IMTR () OL () Y I () HOOK I () RT PITY WIGHT/P. (pprox.) HSH532 5/32" 1-9/16" 9/32" 1/4" 200 lbs..02 lbs. HSH316 3/16" 2" 5/16" 19/32" 105 lbs..05 lbs. HSH014 1/4" 2-3/8" 3/8" 11/16" 260 lbs..08 lbs. HSH932 9/32" 2-3/4" 1/2" 7/16" 400 lbs..10 lbs. HSH516 5/16" 3-1/8" 1/2" 15/16" 500 lbs..18 lbs. HSH038 3/8" 4" 5/8" 1-1/4" 770 lbs..36 lbs. HSH012 1/2" 5-1/2" 7/8" 1-3/4" 1,200 lbs..60 lbs. STINLSS STL HOOKS SNP esign: Standard uty ent/ssembled 304 Stainless Steel Polished ITM NUMR SIZ/ IMTR () OL () Y I () HOOK I () RT PITY WIGHT/P. (pprox.) HSH316-SS 3/16" 2" 5/16" 19/32" 105 lbs..05 lbs. HSH014-SS 1/4" 2-3/8" 3/8" 11/16" 260 lbs..08 lbs. HSH516-SS 5/16" 3-1/8" 1/2" 15/16" 500 lbs..18 lbs. HSH038-SS 3/8" 4" 5/8" 1-1/4" 770 lbs..36 lbs. HSH012-SS 1/2" 5-1/2" 7/8" 1-3/4" 1,200 lbs..60 lbs. ROP/HIN HRWR Your ccount Order History at huyett.com includes: Order Status Your Favorites Order Tracking Info Quantity reaks LL W ORRS OVR $ 100 * xpected Ship ate $ ustomer Specific Pricing Visit our Knowledge Vault catalogs, product training, and best practices. * Some xclusions pply 42 Rated apacity relates to the hook safe capacity. The capacity/strength of any attachment component must be considered. See Safe Lifting hart on page 5. ll rated capacities consider a straight vertical lift. Use UTION when lifting. ny angle beyond vertical (zero degree) will reduce the rated capacity. Snap hooks are not recommended for fall arrest, climbing, or overhead lifting applications. Proudly Serving istributors Since 1899

43 LINKS ROP/HIN HRWR esign: Standard uty ent/machined/ ssembled UN arbon Steel Zinc QUIK ITM NUMR SIZ/ IMTR () OL () WITH I () RT PITY WIGHT/P. (pprox.) QL018 1/8" 1-13/32" 3/8" 500 lbs..03 lbs. QL316 3/16" 1-15/16" 1/2" 660 lbs..05 lbs. QL014 1/4" 2-1/4" 17/32" 880 lbs..08 lbs. QL516 5/16" 2-7/8" 23/64" 1,760 lbs..17 lbs. QL038 3/8" 3-9/16" 25/32" 2,640 lbs..30 lbs. QL012 1/2" 4-5/32" 27/32" 3,300 lbs..55 lbs. STINLSS STL LINKS QUIK esign: Standard uty ent/machined/ ssembled UN Stainless Steel Polished ITM NUMR SIZ/ IMTR () OL () WITH I () RT PITY WIGHT/P. (pprox.) QL014-SS 1/4" 2-1/2" 17/32" 880 lbs..08 lbs. QL516-SS 5/16" 2-7/8" 23/64" 1,760 lbs..17 lbs. QL038-SS 3/8" 3-9/16" 25/32" 2,640 lbs..30 lbs. QL012-SS 1/2" 4-5/32" 27/32" 3,300 lbs..55 lbs. atalogs vailable: PRISION KY STOK U T, F I L, & F I T ROP/HIN HRWR OTTR PINS & WIR FORMS Quality without ompromise Visit huyett.com/atalogs to request or download your copy today, or try our igital atalogs! Rated capacity relates to the hook safe capacity. The capacity/strength of any attachment component must be considered. See Safe Lifting hart on page 5. ll rated capacities consider a straight vertical lift. Use UTION when lifting. ny angle beyond vertical (zero degree) will reduce the rated capacity. Quick links are not recommended for fall arrest, climbing, or overhead lifting applications. huyett.com sales@huyett.com :2015 ISO RTIFI

44 ROP/HIN HRWR WIR ROP LIP esign: Finish-Saddle: Finish-U-bolt/Nuts: FORG See Specification UN 1045 arbon Steel Hot ipped Galvanized lectro Galvanized ITM NUMR ROP SIZ ROSS SL () SL HIGHT () U-OLT HIGHT INSI () OLT IMTR () WIGHT/P. (pprox.) WRF18 1/8" 1" 3/8" 23/32" 7/32".06 lbs. WRF36 3/16" 1-3/16" 1/2" 31/32" 1/4".09 lbs. WRF14 1/4" 1-7/16" 19/32" 1-1/32" 5/16".18 lbs. WRF56 5/16" 1-11/16" 3/4" 1-3/8" 3/8".30 lbs. WRF38 3/8" 1-15/16" 29/32" 1-1/2" 7/16".45 lbs. WRF76 7/16" 2-1/4" 1-1/8" 1-7/8" 1/2".78 lbs. WRF12 1/2" 2-1/4" 1-1/8" 1-7/8" 1/2".80 lbs. WRF96 9/16" 2-1/2" 1-11/32" 2-1/4" 9/16" 1.10 lbs. WRF58 5/8" 2-1/2" 1-11/32" 2-1/4" 9/16" 1.10 lbs. WRF34 3/4" 2-27/32" 1-3/8" 2-3/4" 5/8" 1.40 lbs. WRF78 7/8" 3-5/32" 1-9/16" 3-1/8" 3/4" 2.10 lbs. WRF01 1" 3-15/32" 1-25/32" 3-1/2" 3/4" 2.50 lbs. WRF11 1-1/8" 3-19/32" 1-29/32" 3-7/8" 3/4" 2.80 lbs. WRF16 1-1/4" 4-1/8" 2-3/16" 4-7/16" 7/8" 4.40 lbs. WRF15 1-1/2" 4-7/16" 2-7/16" 4-15/16" 7/8" 5.50 lbs. WRF17 1-3/4" 5-1/4" 2-15/16" 5-3/4" 1-1/8" 9.30 lbs. WRF02 2" 5-7/8" 3-9/32" 6-7/16" 1-1/4" lbs. WRF22 2-1/4" 6-3/8" 3-1/2" 7-1/8" 1-1/4" lbs. Meets specification FF--450 Type 1 - lass 1. WIR ROP LIP MLLL ROP/HIN HRWR esign: Material-Saddle: Material-U-bolt: See Specification ast/ent U-olt UN ast Iron arbon Steel Zinc ITM NUMR ROP SIZ WIGHT/P. (pprox.) WRM16 1/16".01 lbs. WRM18 1/8".02 lbs. WRM36 3/16".03 lbs. WRM14 1/4".08 lbs. WRM56 5/16".14 lbs. WRM38 3/8".23 lbs. WRM76 7/16".25 lbs. WRM12 1/2".34 lbs. WRM96 9/16".42 lbs. WRM58 5/8".50 lbs. WRM34 3/4".65 lbs. WRM78 7/8".75 lbs. WRM01 1".80 lbs. Meets specification FF--450 Type 1 - lass 2. For approximate dimensions see Wire Rope lip Not designed for lifting. No rated capacity. nsure proper number of clips used per industry specifications. Proudly Serving istributors Since 1899

45 STINLSS STL WIR ROP LIP ROP/HIN HRWR esign: Standard uty ast 304 Stainless Steel Polished ST ITM NUMR ROP SIZ ROSS SL () SL HIGHT () U-OLT HIGHT INSI () OLT IMTR () WIGHT/P. (pprox.) SWR018 1/8" 1" 3/8" 23/32" 7/32".05 lbs. SWR316 3/16" 1-3/16" 1/2" 31/32" 1/4".09 lbs. SWR014 1/4" 1-7/16" 19/32" 1-1/32" 5/16".18 lbs. SWR516 5/16" 1-11/16" 3/4" 1-3/8" 3/8".30 lbs. SWR038 3/8" 1-15/16" 29/32" 1-1/2" 3/8".45 lbs. SWR012 1/2" 2-1/4" 1-1/8" 1-7/8" 1/2".80 lbs. SWR058 5/8" 2-1/2" 1-11/32" 2-1/4" 9/16" 1.10 lbs. SWR034 3/4" 2-27/32" 1-3/8" 2-3/4" 5/8" 1.40 lbs. SWR001 1" 3-15/32" 1-25/32" 3-1/2" 3/4" 2.50 lbs. FIST GRIP LIP FORG esign: UN 1045 arbon Steel Hot ipped Galvanized ITM NUMR ROP SIZ () ROSS SL () SL OLT TO N () SL PTH (NS) OLT IMTR () WIGHT/P. (pprox.) FG316 3/16" - 1/4" 1-7/16" 1-13/32" 15/16" 3/8".20 lbs. FG516 5/16" 1-17/32" 1-1/2" 1-1/16" 3/8".28 lbs. FG038 3/8" 1-25/32" 1-27/32" 1-1/16" 7/16".40 lbs. FG012 7/16" - 1/2" 2-1/8" 2-7/32" 1-1/4" 1/2".66 lbs. FG058 9/16" - 5/8" 2-9/16" 2-3/4" 1-1/2" 5/8" 1.00 lbs. FG034 3/4" 2-11/16" 2-15/16" 1-23/32" 3/4" 1.75 lbs. FG078 7/8" 2-7/8" 3-5/16" 2-1/8" 3/4" 2.25 lbs. FG001 1" 3-1/16" 3-3/4" 2-1/4" 3/4" 3.00 lbs. FG /8" 3-7/16" 4-7/32" 2-3/8" 7/8" 4.00 lbs. FG /4" 3-9/16" 4-1/4" 2-1/2" 7/8" 4.00 lbs. FG /8"- 1-1/2" 4-1/8" 5-9/16" 3" 1" 7.00 lbs. Meets specification FF--450 Type III - lass 1. Sizes with dual coverage (i.e. FG012: 7/16" - 1/2") may be marked with only one dimension (i.e. 1/2"). MNUFTURING PILITIS ROP/HIN HRWR Sawing Milling rilling Turning Laser utting Surface Grinding Tumbling Not designed for lifting. No rated capacity. nsure proper number of clips used per industry specifications. huyett.com sales@huyett.com :2015 ISO RTIFI