Vehicle Summary. 462 Type: Length (ft): 0.0 Special Req. Height (ft): 0.0 U.S. Domestic Registry, 50-State Kingpin Inset (in): 0 Corner Radius (in): 0

Transcription

1 Page 1 of 12 MHC Kenworth - Chattanooga T LEE HIGHWAY Vehicle Summary Unit Chassis Model: T880 Series Conventional Fr Axle Load (lbs): Type: FULL TRUCK Rr Axle Load (lbs) : ****2019 T880 CA228 G.C.W. (lbs): Application Road Conditions: Intended Serv.: Wrecker service. Vehicles with recovery bodies, Class A (Highway) 90 Commodity: Auto transporter Class B (Hwy/Mtn) 10 Class C (Off-Hwy) 00 Body Class D (Off-Road) 00 Type: Wrecker Maximum Grade: 6 Length (ft): 23.0 Wheelbase (in): 324 Height (ft): 13.5 Overhang (in): 90 Max Laden (lbs): 4000 Fr Axle to BOC (in): 74 Cab to Axle (in): 250 Trailer Cab to EOF (in): 340 No. of Trailer Axles: 0 Overall Comb. Length (in): 462 Type: Length (ft): 0.0 Special Req. Height (ft): 0.0 U.S. Domestic Registry, 50-State Kingpin Inset (in): 0 Corner Radius (in): 0 Restrictions Length (ft): 120 Width (in): 102 Height (ft): 13.5 Approved by: Date: Note: All sales are F.O.B. designated plant of manufacture. Ask your dealer for a quote today, or visit our PACCAR Financial offers innovative finance, lease and insurance programs customized to meet your needs.

2 Page 2 of 12 MHC Kenworth - Chattanooga T LEE HIGHWAY Model T880 Series Conventional 15,073 T880 0 CARB Idle Emissions Reduction - Cummins 0 Non-Sleeper w/rear axle capacity less than 59K. 0 Auto transporter 0 Wrecker service. Vehicles with recovery bodies, 0 used for recovering & towing stranded vehicles & equipment. Road usage: minimum 5% Class B and maximum 10% Class D. Wrecker 0 U.S. Domestic Registry, 50-State 0 Engine & Equipment X @ @ with Intebrake, Diagnostic Plug for data link, Oil Cooler, Aluminum Flywheel Housing. Linehaul, Performance Series N09200 N Standard Maximum Speed Limit [LSL] N09220 N Expiration Distance N09240 P Hard Maximum Speed Limit N09260 P Maximum Accelerator Pedal Vehicle Speed N09280 P Accelerator Lower Droop N09300 P Maximum Cruise Speed N09320 P Cruise Control Lower Droop N09360 N Reserve Speed Function Reset Distance N09380 N Maximum Cycle Distance N09400 N Maximum Active Distance N09420 N Reserve Speed Limit Offset N09440 P11 YES..Engine Protection Shutdown N09460 P06 NO...Gear Down Protection N09480 P Max PTO Speed N09500 P02 NO...Cruise Control Auto Resume N09520 P04 NO...Auto Engine Brake in Cruise N09540 N Expiration Distance N09560 P520 YES..Enable Idle Shutdown Park Brake Set N09580 P Timer Setting N09600 P233 YES..Enable Impending Shutdown Warning N09620 P Timer For Impending Shutdown Warning N09640 P Engine Load Threshold N09680 P33 NO...Idle Shutdown Manual Overrule N09720 P230 YES..Enable Hot Ambient Automatic Overrule

3 Page 3 of 12 N09740 P Low Ambient Temperature Threshold N09760 P Intermediate Ambient Temperature Threshold N09780 P High Ambient Temperature Threshold Prospector version Replaces version 41.0 Effective VSL Setting NA 0 Engine Idle Shutdown Timer Disabled 0 Enable EIST Ambient Temp Overrule 0 Enable EIST in PTO Mode 0 Use only with MX and Cummins engines Eff EIST NA Expiration Miles 0 Use only with MX and Cummins engines Air compressor: Cummins 18.7 CFM, Naturally 0 Aspirated for Cummins X15 engines Air Cleaner: composite firewall mounted PACCAR or 0 Cummins engines Fan Hub: Horton 2-Speed for X15 0 Cooling module: 1330 square inches. 0 Includes aluminum radiator core, aluminum charge air cooler, translucent surge tank and washer bottle, silicone hoses, and extended life coolant. Radiator bug screen mounted between hood & 2 grille. Exhaust: 2017 EPA Vertical Independent DPF/SCR 24 w/ Single RH back of Cab Tailpipe. *Not Available With Sleepers. *DPF/SCR Mounted Vertically to RH Stanchion. Frame brackets are painted chassis color and other supports are painted black. Tailpipe: 5 in. single 36 in. 45 degree curved. 0 Fuel Filter:PACCAR Standard Service Interval 0 Fuel/Water Separator Emissions Run Aid:None 0 *For Fuel Filter Start Aid:12V Heat 1 *For Fuel Filter Immersion block heater 120V 1500W w/plug under 2 door on C500, T660, T800 & W900. Alternator: Bosch 200 amp, brush type 0 Batteries: 4 PACCAR GP31 threaded post ( ) CCA dual purpose. Starter: PACCAR 12 volt electrical system. W/ 0 centralized power distribution incorporating plug-in style relays. Circuit protection for serviceability, 12-volt light system w/circuit protection circuits number & color coded.

4 Page 4 of 12 Battery disconnect switches 2, mounted on 2 battery box. Multi-function engine connector for body builder 0 interface for Cummins. Body Builder Control Harness coiled EOF for 2 customer installed remote throttle and remote PTO controls. Harness includes Remote PTO control and Remote Throttle controls. T680/T880 models do not require 12-way engine connector sales codes. All other models require ( or ). Transmission & Clutch Transmission: Fuller RTLO18918B 18-speed 237 w/oil cooler & pump. Standard with synthetic lubricant. Includes severeduty pilot bearing on all class 8 models. *Torque Limit: 1850 pound-feet. Clutch: Eaton 15-1/2 in. Advantage Self-Adjust 6 to 1850 ft-lb, Ceramic, 6-Paddle, Predamper Air-assisted Hydraulic Clutch 0 Driveline: 3 Dana SPL250XL W/ 2 centerbearings 185 Requires interaxle driveline. Low maintenance offering from Spicer. On-highway 350K mi first service interval, 100K mi subsequent service interval on U-joint, splines lubed for life, quick disconnect end caps. First Transmission PTO compatibility - 0 Chelsea 880-V3 bottom mounted 8-Bolt PTO s for Eaton all transmissions. This application includes use of the optional hydraulic clutch actuator on Eaton RT & FR transmissions and supports bottom mounted 8-Bolt PTO s with double acting air actuation. Rear transmission support springs for 0 transmission PTO applications are required to ensure that engine flywheel housings are not overloaded when transmission PTO s are installed. First customer installed Eaton transmission PTO in. Eaton Fuller high capacity oil to water 0 cooler standard for transmission lb-ft, 18-speed AutoShift. Aluminum clutch housing 0 Grease bank for clutch throwout bearing 4 Front Axle & Equipment Dana Spicer D2000 Front Axle rated 20K 120 standard track. Front Brakes: 14,601-22K Bendix air disc brakes. 10 Splined rotor for front air disc brakes for use 0 with iron hubs.

5 Page 5 of 12 Front Hubs Iron hub pilot 20,000 lbs. 10 Bolt x6in. or 7in. or air disc brakes. 10 Bolt, 11-1/4 in. bolt circle. Consider Wheelguards ( ) with aluminum wheels. ConMet PreSet Plus Hub package; front axle. 0 Hubcap: front vented. 0 Slack Adjusters included w/ front axle or brake. 0 Also use w/ disc brakes. Front End Lowered: 1 in. Not available W9B/L. 0 Front Springs: Taperleaf 20K w/ shock absorbers 241 w/ maintenance-free elastomer spring pin bushings. Standard with rubber pins except for C500 which has threaded pins. W900S only. Not available on W900L. W900B use Dual power steering gear: 16-22K Sheppard HD Heavy duty. Not for use on T3. Power Steering Cooler:Radiator Mounted Air-to-Oil 11 Threaded Bushings for taperleaf spring 0 16K, 18/20K, 22K, 40K replacing rubber. Rear Axle & Equipment Dual Dana Spicer D46-170H rear axle rated at 46K. 660 w/ 16mm housing and 2.06in. shaft diameter. Tandem rear axles. Rear Axle Ratio Dual rear Bendix air disc brakes for dual 40 rear axles to 46K capacity. Splined rotor for dual rear air disc brake for -208 use with aluminum hubs. Dual Rear Hubs: Aluminum hub pilot 46K /4 in. bolt circle. ConMet PreSet Plus Hub package; dual rear axle. 0 Rear slack adjusters included w/ axle or air 0 disc brakes. Spring brakes included w/ dual rear air disc 0 brakes. Bendix 4S/4M anti-lock brake system. 0 Interaxle driveline 1 Dana SPL170XL -4 Wheel Differential Lock for Dana Spicer axles 112 D40-170(P)/D46-170(H)(P)(WT) forward rear axle & rear rear axle. Rear suspension: Tandem Neway ADZ252 52K in. axle spacing. Air suspension w/ 12 in. ride height & single leveling valve. Includes air suspension dump valve. 1 Steerable Pusher Watson Chalin Tru Track 20K; 1,594 SL2065

6 Page 6 of 12 1 Steerable Pusher brakes: Bendix Non-RSD 16.5x6 0 in.; Use with 20K axle. 1 Steerable Pusher cast brake drums X6 in. for use with 20K axle. 1 Steerable pusher hubs alum hub pilot 10-hole in. bolt circle. For use with 20K axle. Pusher or Tag: gauge dash-mounted; gauge LH of 0 driver s seat, switch/pressure regulator under driver s door. 1st Pusher location: 54 in. from c/l Forward 0 tandem axle or single rear axle. Tires & Wheels Front Tire:Michelin X Multiway HD XZE 385/65R PR Wide Base Tires. 42.4in Diameter. SLR 19.6in. Maximum 68MPH. Rear tires: Bridgestone M726ELA 11R PR in. diameter, highway drive tire in. SLR. Code is priced per pair of tires. Steerable pusher: 2 Michelin XFE 385/65 0 R PR Rear Tire Quantity: 8 0 Front Wheel: Alcoa x12.25 aluminum, -10 with Lvl One [TM] finish, hub-pilot mount lb. maximum rating. Super single. Standard track axles may be over 102 in. w/425 tires. Air disc brake compatible. Rear Wheel: Alcoa 98U X8.25 AL -136 Ultra ONE Wheel. 1 Steerable Pusher Wheel: 2 Alcoa X12.25; aluminum with Lvl One [TM] finish, hub-pilot mount lb. maximum rating. 5.80in. offset. Air disc brake compatible. Single Front Axle: 2 Polished wheels. Polished 0 outboard surface of aluminum wheels. Dual Rear Axle: 4 Polished wheels. Polished 0 outboard surface of outer dual or single aluminum wheels. 1 Pusher: 2 Polished wheels. Polished outboard 0 surface of outboard wheels mounted same as front axle. For use on 1 steerable or 1 non-steerable pusher axle with single wheel. V2B double seal cap valves. 0 Rear Wheel/Rim Quantity: 8 0 Frame & Equipment Frame Rails: 11-5/8 x 3-7/8 x 3/8in. Steel 448in. 961 to 480 in. Truck frame weight is 3.80 lb.-in. per pair of rails. Section modulus is 21.43, RBM is 2,572,000 in-lbs per rail. Frame rail availability may be restricted based upon application, axle/suspension capacity, fifth wheel setting, or component/dimensional specifications. The results of the engineering review may result in a change to the requested frame rail. If a change is required Kenworth Application Engineering will advise the dealer of the appropriate material specification for a substitute rail.

7 Page 7 of 12 Full Steel Insert: for 11-5/8 in. steel rail to 1, in. Adds 2,132,000 in-lb to main rail RBM. 120K PSI. 11-5/8 in. primary insert RBM 4,704,000 in-lbs, section modulus is Full frame insert length is equal to wheelbase plus rear frame cutoff plus dimension forward of front axle by model: T800, T880 = in.; C500B = bumper setting minus 0.79 in.; W900B = 5.27 in., W900L = 1.50 in., W900S = 3.27 in.; T440/T in. bumper setting = in., T in. bumper setting = 72.3 in. Bumper: Tapered chrome steel channel. Requires a 63 bumper setting code in. Bumper setting. Requires a bumper code. 0 Front tow hook: Center mounted, cast. 28 Requires iron front drive brackets. Custom Frame Layout: two chassis 0 Battery box cantilever aluminum BOC w/ 8 fiberglass cover. Battery box location: RH Side. 15 Dealer elects to not use wheelwell fend 0 er size Rear mudflap arms: Betts B-25 standard-duty, 0 straight. Includes B1732 mounting brackets as standard. Rear mudflap shields: White plastic antisail w/ 0 Kenworth logo. Square end-of-frame w/o crossmember; non-towing. 0 Fuel Tanks & Equip Fuel Tank: 75 US gallon 24.5in. aluminum under -11 replace. Class 8 fuel tanks w/o locking caps include an anti-siphon device on the filler neck. Fuel Tank: 75 US gallon 24.5in. aluminum under 104 add. Class 8 fuel tanks w/ o locking caps include an anti-siphon device on the filler neck. Multiple tank installations include a fuel equalization system w/ dual draw and return lines with a splitter valve located within 6 inches behind the cab. Single draw and return is an option in some cases. Small round DEF tank. 11 gallons of 0 useable volume. The DEF tank will be located on the side you specified. If you have specific configuration or body builder concerns, please utilize the Custom Frame Layout option. Standard capacity is calculated by fuel capacity of the vehicle and will accommodate two diesel fill-ups for every DEF fill-up. For 1:1 DEF fuel fill ratio, add Heavy-duty 7in. steel supports/straps for two in. tanks. Two supports per tank. Polish only two aluminum tanks. 0 Polished cover for 1 DEF tank any size. 3

8 Page 8 of 12 Polish only 7in. stainless steel straps for two in. tanks; 2 straps per tank. Standard DEF to fuel fill ratio: 2:1 or greater. 0 Anti-siphon device swaged in place. 0 For any number of fuel tanks. DEF tank location is on the LH. 0 Location: 75 gal fuel tank RH under cab 0 Location: 75 gal fuel tank LH under cab 0 Cab & Equipment Cab: Stamped aluminum cab with panoramic curved 0 glass windshield. Standard with stamped aluminum doors, heavy duty inswinging hinges, and triple sealed doors. Manufactured using selfpiercing rivets and structural adhesive. Includes LED exterior marker lights and turn signals. Hood: T880 Standard Length With Mechanically 15 Fastened Fenders inch BBC. Bright Engine Air Intake 0 Chrome Trimmed Engine Air Intake on Both Sides of Hood Cab HVAC - Day Cab and 40in Sleeper 0 System With Defrost, A/C, and 48,000 BTU/hr Heater. Includes automatic temperature control with one touch defrost operation and dash mounted cab temperature and solar intensity sensors. Pleated fresh air filter and cabin recirculation air filter standard. The Kenworth HVAC system is designed to provide optimal heating and cooling in all operating environments without need for additional insulation. Cab HVAC without sleeper heater AC is available with 40in sleeper. Kenworth Smartwheel: 18 in. Leather Wrapped With 2 Integrated Radio and Cruise Controls. Column Mtd Retarder Control, RH Side 0 Use with Manual & Allison Transmissions Only. Adjustable telescoping tilt steering column. 0 One (1) spare accessory electric-over-air switch 0 with non-latching air solenoid. Non-Latching means the output air pressure will turn off when the ignition is off regardless of switch position. Do not use this switch for options that will allow the vehicle to move with ignition off, such as: trailer suspension dump or trailer lift axles. Mounted on dash for customer-installed option. Air pressure is removed when ignition is off. Not intended for Trailer Lift Axle controls Dash SW: Bendix Work Brake Electric Over Air SW 5 To Apply All Service Brakes Dash Switch: 1st Double-Acting Eaton-mntd PTO. 0 Electric switch, wiring, software, air solenoids, inversion dump valve, amd plumbing are factory-installed to control the 1st Eaton (double-acting) trans PTO. Five spare switches: Wired to power. 0

9 Page 9 of 12 Gauge: Air suspension pressure gauge. 0 Gauge: Engine Oil Temperature Gauge With Integral 0 warning light. The NavPlus HD unit includes a virtual engine oil temperature gauge. Gauge: Axle oil temperature, dual-drive axle. 0 (2 gauges) w/integral warning light. Gauge: Oil Temperature Gauge Transmission. 0 The NavPlus HD unit includes a virtual transmission oil temperature gauge. Kenworth Driver Performance Center:5in Full Color 0 high resolution Thin Film Transistor (TFT) active matrix display with advanced driver information including fuel economy performance, outside air temp, clock, odometer and trip, engine hour meter, ignition timer, engine RPM, general truck information, diagnostics, and gear display. All Highline functionality is accessed via the Kenworth MCS providing intuitive control at the driver s fingertips. Also includes Dark Cabin functionality. When activated, the only interior light that will function when a door is opened is the door courtesy lamp. Kenworth instrumentation and control package with 0 9 standard easy-read gauges: includes speedometer, tachometer, fuel gauge, engine coolant temp, engine oil pressure, voltmeter, dual air pressure, air application pressure and DEF gauge. All accessory controls utilize electronically activated solenoids that include advanced vehicle protection interlocks. Interior color: Slate Gray 0 Interior Package: Diamond VIT Daycab 0 Includes diamond design trim with premium wood grain accent trim and anodized aluminum accents throughout. Standard with the Kenworth NavPlus HD system on 2010 and later engines. Convenient overhead storage cubbies, full size glove box, two center console cupholders, and large door pad map pocket. Standard LH and RH power windows, electric door locks, interior LED lighting, nighttime friendly red ambient lighting for dash and footwell, and door mounted courtesy light. Includes two standard 12V power outlets. Driver sunvisor includes vanity mirror and strap, passenger sunvisor includes strap. Rubber floormat 0 Driver Seat: GT702 HB with Ultraleather material 10 and integral heat. The GT702 is standard with a single air bag, scissor linkage seat suspension that incorporates seat height memory, autoleveling valves with exit air dump, and adjustable damper. It includes a dual chamber lumbar support, 10in Fore/Aft adjustment, 5in Up/Down adjustment with protection zones, 2.5in pan extension, 51 degree seat back recline, and 16 degree full seat tilt. Includes 3-point matching seat belts. DR seat standard w/ dual armrests.

10 Page 10 of 12 Rider Seat: GT702 HB with Ultraleather material 44 and integral heat. The GT702 is standard with a single air bag, scissor linkage seat suspension that incorporates seat height memory, autoleveling valves with exit air dump, and adjustable damper. It includes a dual chamber lumbar support, 10in Fore/Aft adjustment, 5in Up/Down adjustment with protection zones, 2.5in pan extension, 51 degree seat back recline, and 16 degree full seat tilt. Includes 3-point matching seat belts. Rider seat standard w/ LH armrest. Seat color: Slate Gray with Gray stitching. 0 CB Radio: Cobra 29. Includes weatherband w/header 11 mounted quick release. Includes transceiver & separate speaker remotemounted in headliner & dual CB antennas. Includes sound tracker & illuminated panel. Mid Level Audio System - Daycab: High Performance 4 Door and B-Pillar Speakers. Non-self cancelling turn signal: W/column-mounted 0 headlight dimmer switch & intermittent wiper control. Remote Keyless Entry 0 Stainless steel permit panel on cab, driver side 0 only Kenworth TruckTech+ 0 The Kenworth Remote Diagnostics system provides the Worlds Best reporting of engine and aftertreatment fault codes, as well as enhanced support for the truck owner through rapid communication of fault severity and recommended actions. This option is Standard on all Kenworths with an MX engine. Dual Cab Interior Grabhandles: A Pillar Mounted 0 Dash Wrap and B Pillar Mounted Grabhandles Side Extenders: Daycab. Extends 19 inches from 0 Back-of-cab. Panels extend 12 inches, and rubber trailing edge extends 7 inches. Kenworth Daylite Door with standard LH/RH 0 electric door locks and LH/RH electric window controls. Quad rectangular air horn 23/26 in. LH/RH top of 11 roof. Includes air horn covers. Look-Down, Pass. Door, Black 11x6 0 Aero Mirror: Dual Kenworth Chrome Aero. Motorized 0 Heated Mirrors, 7in X 13in With Chrome Mirror Shell and Black Mirror Arms. Also Includes LH/RH Heated 6in X 7in Convex Mirrors. Mirror Brackets Set For 8-1/2 ft Load Width. Mirror Controls Located On Driver Side Door Pad. Rear cab stationary window with dark tint 0 19in x 36in. One-piece bonded-in windshield with curved glass. 0 Standard. Exterior stainless steel sunvisor. 19

11 Page 11 of 12 Fender close-out: Below headlamp, behind 0 bumper. *NOT available with 3-piece bumper. Kenworth Cab/Sleeper Air Suspension. 0 Lights & Instruments Headlamps: SAE Dual Halogen Complex Reflector 0 Marker Lights: Five, rectangular, LED 0 Turn Signal Lights: Flush mounted LED mounted at 0 top of fender wheel arc LED Stop,Turn,Tail: With Two LED 0 Backup Lights and With An LED License Plate. Halogen Spotlight: LH mounted. 4 Stainless Steel Brackets, Switch & Wiring: 4 Customer-installed dual beacon lights mounted over door of cab. Marker Lights: Interrupter Switch. 0 Included in Turn Signal For All Models Except T3. The T3 Switch Is In The Dash. Polyswitches replacing fuses. Switch will 0 automatically reset after removal of excess load. Air Equipment Extended Warranty Miscellaneous Air Dryer: Bendix AD-IS Extended Purge heated. 4 with PuraGuard Moisture ejection valve w/ pull cable drain. 0 Full truck kit: Gladhands mounted at end-of- 15 frame.seven-way female receptacle mounted at end-of-frame in taillamp bracket. Kit includes dash mounted trailer air supply valve, trailer hand control valve, and hoses/fittings for the valves. Dash mounted parking brake valve, tractor protection valve, and spring brake inversion/relay valves are standard. Nylon air tubing in frame & cab, excluding hoses 0 subject to excessive heat or flexing. Trailer ABS electric supply through SAE J pin connector per TMC RP137). Air tanks: aluminum replacing steel all tanks. -44 *Not air tanks on lift axles. Base Warranty - Standard Service Heavy Duty 0 12 months / 100,000 miles / 160,000 km. Local PDI then Ship to Dealer. 0 N94000 Local PDI GHG Secondary Manufacturer: Does Not Apply 0

12 Page 12 of 12 Additional lead time required for off highway & 0 /or specialty component truck. Warning triangle reflector kit: Shipped loose. 4 Kit consists of 3 triangles in plastic carrying case. Not floor mounted. One 5 lb. dry chemical type fire extinguisher 11 mounted inboard of driver seat. Class ABC. Paint Total Paint color number. 0 N97020 A - L0612 RED N97200 FRAME N0001 BLACK Bumper Unpainted 0 Day Cab Standard Paint Color Paint - Day Cab 0 Color will be White if no other color is specified. Base coat/clear coat. 0 The Kenworth Color Selector contains additional instructions, as well as information on Kenworth paint guidelines and surface finish applications. Kenworth is standard with Dupont Imron Elite paint lb Prices and Specifications Subject to Change Without Notice.