Worm gear cylinder Motorized Diaphragm

Transcription

1 Rotary Control Valve TT A 0A/0Q 0A/0Q 0Y/0Y 0M HV 7V/ T/7T/7Q T/T 77ZNAV-Z 700G/70G/705G 7/7 7X/7X 70G/7F/70F 7 90C/90C neumatic Worm gear cylinder Motorized Diaphragm For various applications such as air conditioning systems, pulp & paper mills, steel mills, chemical plants, food processing, and many other process industries, the rotary control valve 7V/ will support your fluid control applications at all times. Model Rotary control valve for high temperature fluids up to 00 degrees C General Model 7V is the high temperature version of our rotary control valve. In designing it for exclusive use in the regulation of fluids, we have pursued every angle of the control requirements and developed a state-of-the-art product: one with high rangeability, reduced dynamic torque, low noise level, anti-cavitation, and other excellent features. This model covers a wide temperature range in the fluid control of air conditioning systems, pulp and paper mills, chemical plants, steel mills, and food processing equipment. The high performance characteristics of this model in fluid control originates from its unique design with a teeth and gull-wing shaped disc that touches the seat at a certain angle. The teeth are arranged on the circumference of the disc towards either direction of flow. The "touchat-an-angle" disc assists the reduction of seating and unseating torque and facilitates smooth control of the valve. Structure Features Flexible control over a wide range The 7V allows complete control over the full range from the open to the closed position. The valve can also handle high temperatures of up to 00 degrees C such as in steam lines. These features enable the rotary valve to response quickly and flexibly to any changes within the operating parameters of the process lines. The 7V, therefore, is the optimum valve for any control systems processing multiple products where the operating conditions change from time to time in accordance with process requirements. Cost-effective rotary control valve In spite of its compact size and light weight, the 7V has a large valve capacity that minimizes the energy loss of fluid at the fully open position. This compact design reduces the required size of the actuator, installation space and piping supports, and minimizes vibration of control systems, and increases the operating life. These features provide the benefit of reducing the total operating cost of your plant. 7V-0

2 Model Rotary control valve with tight shutoff and high grade rubber seat ring General With a specially designed rubber seat ring, Model ensures tight shut-off, and eliminates the need for any additional stop valve required by conventional control valves. The face-to-face dimension meets both JIS and ISO standards and is applicable for various industrial fields including air conditioning systems. Structure Tight shutoff with a rubber seat ring Except for the rubber seat ring, the has the same design principle as the 7V. Excellent controllability is achieved by having the innovative teethed disc seating at a certain angle. The has a reinforced core rubber seat ring allowing it to be used for high pressure service up to.ma with complete tight shutoff. Features Rubber seat ring with a "controlcosine curve" profile Taking into consideration the cosine curve profile rubber seat ring, incorporated in our models 700G and 70Z, etc. we developed a new type of seat ring for exclusive use in the. The has a reinforced core rubber seat ring incorporated with a "control cosine curve" profile for sizes between mm and mm. This seat ring design ensures a tight shut-off up to a working pressure of.ma. The available in sizes between mm and mm, has a similar seat ring design and profile. The seat ring is backed up by a metal core precisely formed and encapsulated inside the rubber. This design enables the control valve to function under severe conditions of high velocity, a large differential pressure, or a high vacuum. (The maximum allowable shutoff pressure is.0ma.) No additional stop valve, less installation space, and less cost Because of its reliable sealing effect against a high differential pressure, the does not require an additional stop valve. You save on installation space and benefit from the excellent cost effective features of our rotary control valve. SatisfIes both JIS and ISO standards for extended applications The is available in different flange specifications. Also, its face-to-face dimension meets both JIS and ISO requirements. Thus, this model is applicable for various industrialapplications worldwide. mm to mm Sizes mm and over have different structures. TT A 0A/0Q 0A/0Q 0Y/0Y 0M HV 7V/ T/7T/7Q T/T 77ZNAV-Z 700G/70G/705G 7/7 7X/7X 70G/7F/70F 7 90C/90C Control valve, 7V / series General With guide-vane-like teeth around the disc edge, and the disc touching the seat at a certain angle, this product is a compact, lightweight and highly cost-effective, high-performance rotary control valve that exhibits outstanding control characteristics. The valve provides steady control over a wide range with higher rangeability, better cavitation resistance, lower dynamic torque, lower noise level, and a better leakage rate than any other rotary control valve. Two models, the 7V and, are available for a range of severe applications. The 7V is the optimum type for fluid control of high pressure, high temperature systems. The is characterized by its rubber seat ring. Fundamental structure This product has two basic design features that are responsible for the outstanding performance. One is the teeth around the disc and the other is the gull-wing-like design of the disc. The teeth on the circumference of the disc break up the fluid energy acting on it with a resultant reduction of pressure recovery. Unlike conventional flat discs, the gull-wing-like disc of the product touches the seat at a certain angle for reduced seating/unseating torque. This results in steady control of the valve. Globe valve Recent trend toward rotary type control valves ow-noise valve (for less noise) Anti-cavitation valve (against cavt n.) Rotary control valve (for less torque) Tight shutoff Rubber seat 7V-0

3 TT A 0A/0Q 0A/0Q 0Y/0Y 0M HV 7V/ T/7T/7Q T/T 77ZNAV-Z 700G/70G/705G 7/7 7X/7X 70G/7F/70F Service temperature * Standard materials Valve size ressure rating Actuator mounting Flange accomodation Rangeability Valve opening characteristics eakage rate** Stuffing box Body Disc*** Cast steel Stainless steel to mm to 00mm to mm to 00mm Stem Bearings ackings Gland flange Standard specifications to 00mm to mm: ANSI CASS 00bs. to 00mm: ANSI CASS bs. Non-flange joint JIS 0K, JIS K, JIS 0K ANSI CASSb., ANSI CASS 00b., DIN N 0,, 5 lease contact us when mm/k and over. 0 to +00 degrees C Following materials are used for degrees C or higher temperatures Carbon for bearings Grafoil R for packing to +00 degrees CFollowing materials are used for degrees C or higher temperatures Carbon for bearings Grafoil R for packing : Max 70 Equal percent ANSI / FCI 70- CASS Studs and nuts tightening Cast steel SCH Cast steel SCH Cast steel SCH Ductile iron FCD Reinforced Teflon R Teflon R asbestos Stainless steel Stainless steel SUS0(SUS)**** Stainless steel SCS Stainless steel SCS Stainless steel SCS Stainless steel SCS Reinforced Teflon R Teflon R asbestos Stainless steel 7 *lease consult us if the application is in the range of 00 degrees C to 00 degrees C. Grafoil R is a product of Union Carbide Inc. **The disc is gull wing shaped and touches the metal seat at an angle. This design minimizes leakage to a level less than 0.5% of the rated Cv, which is equal to or lower than the leakage permitted on a double-seat globe control valve. ***The disc is electroless planted with nickel. ****lease consult us if an SUS stem is required. Note: Teflon R is a registered brand name of a fluoroplastic produced by Mitsui Du ont Fluorochemicals and Du ont Corporation. 90C/90C 7V-0 5

4 [Tight Shutoff With Rubber Seatring] Valve size Face-to-face dimension Flange accomodation Woking temperature range Woking temperature in continuous use Max. working pressure Body. test pressure Seat leak test pressure characteristics Rangeability Standard materials * Body Disc Stem Seat ring Standard specifications,,,, mm, 00, mm JIS5K, 0K, K, 0K ANSIb DIN N0, N BS N0, N BS0"E", "F" JIS G 55, 557 JIS B series / ISO 575 basic series 0 wafer butterfly valveshort JIS G 55, to 0 degrees C0 to degrees C 0 to degrees C, 0 to 0 degrees C Shut-off pressure.ma.0ma.ma.5ma.ma.ma SCS JIS0K, K ANSIb DIN N0, N BS N0, N BS0"E", "F" Nearly equal percent : FCD (No fluid exposure) SUS0J (No fluid exposure) EDM core-reinforcedoptionnbr core-reinforced. mm only: JIS B Series 7/ ISO Basic Series 5medium. represents NBRrepresents EDM. "Woking temperature in continuous use" stands for the temperature continuouslykept exceeding one hour. Never use an EDM rubber seat is ring if the valve being used for oil or for a fluid containing even a slight amount of oil. Shut-off pressure.0ma.5ma.ma SCS 00,, 0, 00mm JIS0K ANSIb DIN N0, N BS N0, N JIS G to degrees C0 to 0 degrees C 0 to 0 degrees C0 to degrees C NBR core-reinforced, optionedm core-reinforced TT A 0A/0Q 0A/0Q 0Y/0Y 0M HV 7V/ T/7T/7Q T/T 77ZNAV-Z 700G/70G/705G 7/7 7X/7X 70G/7F/70F 7 90C/90C 7V-0

5 TT A 0A/0Q 0A/0Q 0Y/0Y 0M HV 7V/ T/7T/7Q T/T 77ZNAV-Z 700G/70G/705G 7/7 7X/7X 70G/7F/70F Multiple merits for multiple applications Valve opening mm 0 Rated Cv 0 / 0 = coefficient Cv Valve opening High rangeability The wide range of controllability permits flexible adjustment to any changes in the process conditions of production lines. This merit is especially beneficial to multifold productions. The conventional "split range control" with twin valves is no longer required. One product is enough to cover the whole range. With its nearly "equal percent" flow characteristics and its very low leakage rate, the product offers an extremely high rangeability of :. Controllability Combined torque Nm ow dynamic torque The steady performance ensures more precise control. The compact actuator saves space and energy. mm Conventional butterfly valve mm ow torque butterfly valve mm Valve opening The above graph shows a comparison of the product with other typical valves. The patented disc has remarkably reduces the dynamic torque. Kc F Excellent cavitation resistance The outstanding cavitation resistance increases the operational life of the valve and pipeline, and improves the reliability of the system. This model is works in more severe requirements than ever Reliability F ressure recovery coefficient Kc Cavitation coefficient % of rated Cv A high coefficient of initial cavitation (KC), and a high pressure recovery coefficient (F), inhibit the occurence of cavitation. 7 90C/90C Size Cv value Opening angle mm inch Cv Cv Cv Cv Cv Cv Cv Cv Cv CvFp CvFp CvFp CvFp CvFp CvFp CvFp CvFp CvFp Remarks: CvFp : ipe size=.5valve size EX: 7V " ipe 7V-05 7

6 Noise level (dba) Environmental considerations ow noise level rovides better work environment. Especially in air and gas applications, this product has a lower noise level by 5 to 0dBA and meets and exceeds noise regulations mm mm Conventional butterfly valve The fluid: air /=0.5 TO Valve Cv The teeth on the disc cut the flow into fine jet streams. This is the most effective device for lowering the noise level when the valve is half open. Cost merit arger valve capacity Reduces loss of energy at the fully open position. Allows one to two sizes of valve reduction in comparison with a conventional valve. Compact and lightweight design ermits compact piping arrangement. Allows the use of a portable remote controller unit. Eliminates vibration problems of the piping system, and improves operational life. Simple design ermits easy control of spare parts. Facilitates easy maintenance. Has a reduced number of parts and improved reliability. TT A 0A/0Q 0A/0Q 0Y/0Y 0M HV 7V/ T/7T/7Q T/T 77ZNAV-Z 700G/70G/705G 7/7 7X/7X 70G/7F/70F 7 90C/90C ressure recovery factor (F), coefficient of incipient cavitation (Kc) Opening angle ressure recovery factor (F) Coefficient of incipient cavitation (Kc) V-0

7 7V Actuator selection chart 7V Size ( mm inch ( TT A 0A/0Q S DGH- DGH- 0A/0Q 0Y/0Y 0M HV 7V/ E,A G,F I K70 K70 K70S K70S K70 K700S K700 I- I- I-.5 I- TGA- T/7T/7Q T/T Z H 00H 77ZNAV-Z 700G/70G/705G 7/7 7X/7X 70G/7F/70F 7V Allowable differencial pressure for E Double-action Cylinder 7 Cv%Cv/Rated Cv 90C/90C mm inch Cylinder Valve opening % 57 9 K70 K K70 K K70 K K K K K70 K K70 K K K K V-07 9

8 7V Allowable differencial pressure for G, F Single-action Cylinder Cv%Cv/Rated Cv mm inch Cylinder Valve opening % 57 9 TT A K70S A/0Q K70S K70S K70S A/0Q 0Y/0Y K70S M HV K70S V/ K700S K70S K700S T/7T/7Q T/T 0 K700S ZNAV-Z 700G/70G/705G 7/7 7X/7X 7V Allowable differencial pressure for Z 70G/7F/70F mm inch Model Supply pressure Ma Spring range ka Cv%Cv/Rated Cv Close Valve opening % C/90C H to H to H to H to H to H to H to H to H to Actual operation: 0 to 0ka 7V-0

9 7V Allowable differencial pressure on stem SUS0 Cv%Cv/Rated Cv TT A 0A/0Q mm inch Valve opening % A/0Q 0Y/0Y 0M HV V/ T/7T/7Q T/T ZNAV-Z 700G/70G/705G 7/7 7X/7X SUS 0 Cv%Cv/Rated Cv Valve opening % 70G/7F/70F mm inch C/90C V-09 5

10 Worm gear type7v-s (mm to 00mm) Dimension (mm) mm inch d D H H H E K F W Gear type DGH- DGH- DGH- DGH- DGH- DGH- DGH- DGH- DGH- Approx. weight (kg) TT A 0A/0Q 0A/0Q 0Y/0Y 0M HV 7V/ T/7T/7Q 7V-S F K E T/T 77ZNAV-Z D d W H H H 700G/70G/705G 7/7 7X/7X 70G/7F/70F 7 S Installation direction 90C/90C SA SB SC SD 5 7V-0

11 Double-acting pneumatic cylinder type7v-amm, 00mm TT A 0A/0Q 0A/0Q Dimension (mm) mm inch d D H H H A A free angle adjuster comes with the pneumatic cylinder. 7V-A f f Cylinder type TGA- TGA- Approx. weight (kg) Y/0Y 0MHV 7V/ T/7T/7Q T/T 77ZNAV-Z 700G/70G/705G 7/7 7X/7X D A d H H H f f 70G/7F/70F 7 90C/90C A Installation direction AA AB AC AD 7V- 5

12 Single phase electric motor type7v- Imm to 00mm Dimension (mm) mm inch d D H H H A F K Motor type I- I- I- I- I- I-.5 I- I- I- Approx. weight (kg) TT A 0A/0Q 0A/0Q 0Y/0Y 0MHV 7V/ T/7T/7Q 7V- I T/T D A d H H H F K 77ZNAV-Z 700G/70G/705G 7/7 7X/7X 70G/7F/70F 7 90C/90C I Installation direction IA IB IC ID 5 7V-

13 7V-Zmm to 00mmwith diaphragm actuator TT A 0A/0Q 0A/0Q 0Y/0Y 0MHV 7V/ T/7T/7Q T/T 77ZNAV-Z Dimension (mm) mm inch d D H H H A Remarks: H shows the dimension when the positioner (TCE0) is installed. The H dimension will change depending on the positioner type. 7V-Z f f f Diaphragm type H H H H H 00H 00H 00H 00H Approx. weight (kg) G/70G/705G 7/7 7X/7X A 70G/7F/70F D d 7 f Stem center f f H H H 90C/90C Z Installation direction ZA ZB ZC ZD 7V- 55

14 7V Cv value/pressure loss coefficient 0,000 Cv value 00mm mm 00mm mm 0,000 ressure loss coefficient TT Cv value 0,00 mm mm mm mm mm ressure loss coefficient 0,00 A 0A/0Q 0A/0Q 0Y/0Y (fully open) Valve opening Valve opening (fully open) mm mm mm mm mm mm 00mm mm 00mm 0MHV 7V/ T/7T/7Q T/T 7V Cv value 77ZNAV-Z Valve opening mm inch G/70G/705G 7/7 7X/7X 70G/7F/70F 7 90C/90C 7V ressure loss coefficient Valve opening mm inch V ressure recovery coefficientfand Cavitation coefficientkc Valve opening ressure recovery coefficientf Cavitation coefficientkc V-

15 7V Applicable pipe list in case of A TT mm inch Sch0 Sch0 Sch0S Sch0S Minimum internal diameters of piping (mm) A 7 0A/0Q 0A/0Q Y/0Y 0 0M HV 7V/ T/7T/7Q T/T 7V Applicable pipe list in case of B 77ZNAV-Z 700G/70G/705G 7/7 7X/7X mm inch Sch0 Sch0 Sch0S Sch0S 70G/7F/70F C/90C 00 Remark: Applicable Not applicable Remark: Butterfly valves are inserted into a pipe that was fitted with the disc when fully open. In cases where you are using a pipe or flange that is less than the minimum inner pipe diameter, use is still possible if means are taken such as inserting a spacer between the valve and flange. For details, please consult us. A B Minimum internal diameter of piping Minimum internal diameter of piping 7V-5 57

16 7V Applicable flange standard JIS ANSI BS DIN mm inch 0K K 0K b 00b N0 N D D D D D D D D D D D D Can be used without flange drilling. D With flange drilling Not applicable TT A 0A/0Q 0A/0Q 0Y/0Y 0M HV 7V/ T/7T/7Q T/T mm inch 0 Material ong bolt: SNB7 Nut: S5C 7V iping bolt and nut sizes JIS 0K JIS 0K ANSI b ANSI 00b ong bolts and nuts ong bolts and nuts -M0 -M0 -U 5/ -U 5/ -M0 -M070 -U 5/ -U /75 -M0 -M070 -U 5/ -U /75 -M070 -M90 -U /75 -U /90 -M070 -M0 -U /90 -U 7/ -M0 -U 7/ -M0 -U 7/ -M0 -U 0 -M0 -U 0 77ZNAV-Z 700G/70G/705G 7/7 7X/7X 70G/7F/70F 7 90C/90C Example ong bolts - M 5 ong bolts and nuts (full thread) M N M 5 7V-

17 Expanded view of components TT A 0A/0Q mm to mm 0 9 0A/0Q 0Y/0Y 00mm 0M HV 7V/ T/7T/7Q T/T 77ZNAV-Z 700G/70G/705G 7/7 7X/7X g 70G/7F/70F to 00mm 7 90C/90C mm to mm V-7 59

18 arts list arts listmm to mm Body Disc Stem Bearing Bearing Bottom cover Taper pin O-ring Hexagon bolt Spring washer Machine screw Seat ring Gasket Ball Hollow bolt ock nut Dust seal O-ring O-ring O-ring arts list00mm to 00mm No. Description Q ty Remarks No. Description Q ty Remarks g Body Disc Stem Bearing Bearing Bottom cover Taper pin O-ring Hexagon bolt Spring washer Hexagon bolt Spring washer Seat ring O-ring Gasket O-ring Ball Hollow bolt ock nut Key Remark: The indicates recommended spare parts. They are supplied as Seat ring set with a small hexagonal spanner to remove hollow bolt (.). mm to mm 00mm, mm Only mm, mm mm to mm mm to mm Only mm to 00mm Only mm to 00mm Only mm to 00mm 00mm, 0mm mm, 00mm 00mm mm to 00mm TT A 0A/0Q 0A/0Q 0Y/0Y 0M HV 7V/ T/7T/7Q T/T 77ZNAV-Z 700G/70G/705G 7/7 7X/7X 70G/7F/70F 7 90C/90C 0 7V-

19 Actuator selection chart TT A 0A/0Q Model U Category Standard U-0 U- Size ( mm inch U- U- U- U-5 ( 0 0 MGH- 00 MGH- 0A/0Q 0Y/0Y 0M HV 7V/ T/7T/7Q T/T E,A G,F U,K I J, Standard Standard ON-OFF Control Standard K0 K70 K70 K70 K70S K70S K70S K700S K700 I-0 I- I-.5 I- SRJ-00 SRJ- 00 SRJ-00 TKD-0 0.kW/ DGH- TGA-5 I- TKD-0 0.kW/ MGH- TGA- 0 TGA- 0 TG- 0S TG-S TG-S TG-0S TKD kW/ MGH- TGA- TKD kW/ MGH-5 77ZNAV-Z 700G/70G/705G 7/7 7X/7X X,W Standard H 00H Remark: In case of mm type with accessories below for control type I- should be selected. Micom unit Servo unit Speed control unit otentiometer 70G/7F/70F 7 90C/90C ressure rating to mm to 00mm (ressure).ma (ressure).ma.0ma.0ma 0.Ma 0.Ma 0.Ma 0.Ma degree C (Temperature) degree C (Temperature) 7V-9

20 Allowable differencial pressure for X and W Valve opening mm inch Allowable differencial pressure on stem Valve opening mm inch The above is based on the result at our test plant. The test was conducted with fresh water at ambient temperature. Therefore, please use the data for reference only. Consult us if you have a question or doubt TT A 0A/0Q 0A/0Q 0Y/0Y 0M HV 7V/ T/7T/7Q T/T 77ZNAV-Z 700G/70G/705G 7/7 7X/7X 70G/7F/70F 7 90C/90C Maximum velocity Fresh water Sea water Airambient temp. Short period Continuous Short period Continuous Short period Continuous 0m/s 7m/s 0m/s 5m/s m/s 0m/s The maximum velocity shown is estimated as an average in the fully open state. Remark: Short period means a few minutes creating high velocity until the disc angle reaches the designated position. 7V-0

21 Bare shaft0mm to mm, 000mm to 00mm TT A 0A/0Q 0A/0Q 0Y/0Y 0M HV 7V/ T/7T/7Q T/T 77ZNAV-Z 700G/70G/705G 7/7 7X/7X 70G/7F/70F 7 90C/90C -0 (mm to mm) / -0 (00mm) Dimension (mm) mm inch d D H H a a S d Flange dimensions Flanges S C N B.H. F07 F0 F F F (mm to 00mm) mm inch d D JIS0K 5 0 mm, mm JISK Dimension (mm) H H a a d b t.5.5 b t t.5 D 0 mm to mm t 0 C Flanges N F07 F07 F07 F0 F0 F0 F F F 0Square B.H. 9 9 Approx. weight (kg) Round with key Approx. weight (kg) 9 (0) S N-B.H. S N-B.H. C C d S d S t D d a H H a t D d a H H a Stem design 7V-

22 00mm mm, 0mm S N-B.H. N-B.H. TT A C D C 0A/0Q d t t D d a b H H a d t t D d a b H H a 0A/0Q 0Y/0Y 0M HV 7V/ T/7T/7Q T/T 77ZNAV-Z 700G/70G/705G 7/7 7X/7X 70G/7F/70F 00mm For JIS0K, BS N0 and DIN N0 BS0 Table E N-B.H. 00mm For JISK, ANSI b, BS N and DIN N N-B.H. 7 90C/90C D C D d C t t D d a b H H a d t t D d a b H H a 7V-

23 Worm gear type-umm to 00mm/ -Smm to 00mm TT A 0A/0Q 0A/0Q 0Y/0Y 0MHV 7V/ T/7T/7Q T/T 77ZNAV-Z 700G/70G/705G 7/7 7X/7X Dimension (mm) mm inch d D H H H E (70) A handle lock is attached for manual gear. shows the data for JIS K 00mm. -U/S K E F K F W Gear type U-0 U- U- U- U- U- U- U- U-5 MGH- MGH- MGH- Approx. weight (kg) () 70G/7F/70F 7 D d W H H H 90C/90C U/S Installation direction UA/SA UB/SB UC/SC UD/SD 7V- 5

24 Double-acting pneumatic cylinder type-emm to 00mm Dimension (mm) mm inch d D H H H H E A f f Cylinder type K0 K70 K70 K70 K70 K700 K700 Approx. weight (kg) TT A 0A/0Q 0A/0Q 0Y/0Y 0MHV 7V/ A f f T/7T/7Q T/T H 77ZNAV-Z 700G/70G/705G H 7/7 7X/7X H D d H 70G/7F/70F 7 E Installation direction Air port side Retainer side Retainer side Retainer side Retainer side 90C/90C Air port side Air port side Stem side Stem side Stem side Stem side Air port side EA EB EC ED 7V-

25 Double-acting pneumatic cylinder type-amm to 00mm Dimension (mm) mm inch d D H H H A f f Cylinder type Approx. weight (kg) TT TGA-5 A 0A/0Q TGA-5 TGA-0 TGA A/0Q 00 5 (70) TGA- 55(5) 0Y/0Y Remark: Value in brackets indicates Q (air to close). A free angle adjuster comes with the pneumatic cylinder. 0MHV 7V/ -A A f f T/7T/7Q T/T 77ZNAV-Z 700G/70G/705G 7/7 7X/7X H H 70G/7F/70F D d H 7 90C/90C A Installation direction AA AB AC AD 7V-5 7

26 Single-acting pneumatic cylinder type-gair to openmm TO mm/ 0A-FAir to closemm to mm -G Dimension (mm) Cylinder Approx. weight mm inch d D H H H A f f type (kg) K70S K70S K70S K700S 0. -F Dimension (mm) mm inch d D H H H H A f f Cylinder type K70S K70S K70S K700S Approx. weight (kg) TT A 0A/0Q 0A/0Q 0Y/0Y 0MHV 7V/ T/7T/7Q T/T 77ZNAV-Z -F A -G A f f 700G/70G/705G 7/7 7X/7X D d D d H H H H 70G/7F/70F 7 90C/90C F Installation direction Air port side Retainer side Retainer side Retainer side Retainer side Air port side Air port side Stem side Stem side Stem side Stem side Air port side FA FB FC FD 7V-

27 Single-acting pneumatic cylinder type-uair to openmm to 00mm/ -KAir to closemm to 00mm TT A 0A/0Q 0A/0Q 0Y/0Y 0M HV 7V/ T/7T/7Q Dimension (mm) mm inch d D H H H A (55) (70) (70) 95 (5) 95 (5) 0 (095) 0 (095) 0 (095) Remark: Value in brackets indicates Q (air to close). Brackets indicates the data for JIS K 00mm. A free angle adjuster comes with the pneumatic cylinder. f f Cylinder type TG-0S TG-S TG-S TG-S TG-S TG-0S TG-0S TG-0S Approx. weight (kg) T/T -K -U 77ZNAV-Z 700G/70G/705G 7/7 7X/7X A A f f 70G/7F/70F 7 D d D d H H H 90C/90C K Installation direction KA KB KC KD U Installation direction UA UB UC UD 7V-7 9

28 Single phase electric motor type- Imm to 00mm Dimension (mm) mm inch d D H H H A F K Motor type I-0 I-0 I- I-.5 I-.5 I- I- I- I- I- Approx. weight (kg) TT A 0A/0Q 0A/0Q 0Y/0Y 0M HV 7V/ T/7T/7Q Remark: For mm type with accessories below for control type I- should be selected. Micom unit Servo unit Speed control cnit otentiometer - I A F K T/T 77ZNAV-Z 700G/70G/705G 7/7 7X/7X 70G/7F/70F D d H H H 7 90C/90C I Installation direction IA IB IC ID 70 7V-

29 Three phase motor actuator type-00mm to 00mm TT A 0A/0Q 0A/0Q 0Y/0Y Dimension (mm) mm inch d D H H H E (70) K F M Motor type TKD-0 0.kW/ DGH- TKD-0 0.kW/ DGH- TKD-0 0.kW/ MGH- TKD kW/ MGH- TKD kW/ MGH- TKD kW/ MGH-5 Approx. weight (kg) 0 5 0(0) 0M HV - Brackets indicate the data for JIS K 00mm. 7V/ T/7T/7Q M Installation direction T/T 77ZNAV-Z 700G/70G/705G 7/7 7X/7X E K F A B H 70G/7F/70F H C D 7 D d H 90C/90C 7V-9 7

30 -XAir to openmm to mm/ -WAir to closemm to mmwith diaphragm actuator Dimension (mm) mm inch d D H H H A f f f Diaphragm type H H H 00H 00H Approx. weight (kg) TT A 0A/0Q 0A/0Q Remarks: H shows the dimension when the positioner (TCE0) is installed. The H dimension will change depending on the positioner type. 0Y/0Y -X/W 0M HV 7V/ T/7T/7Q A T/T 77ZNAV-Z D d 700G/70G/705G 7/7 7X/7X f f f Stem center H H H 70G/7F/70F X Installation direction 7 90C/90C XA XB XC XD W Installation direction WA WB WC WD 7 7V-0

31 Cv value/pressure loss coefficient TT,000 Cv value,000 ressure loss coefficient A 0A/0Q 0A/0Q 0Y/0Y 0M HV 7V/ T/7T/7Q Cv value 0,000,000 00mm 0mm mm 00mm mm 00mm mm mm mm mm mm mm ressure loss coefficient 0,000,000 mm mm mm 00mm mm 00mm mm 0mm 00mm T/T 77ZNAV-Z 0 mm 0 mm 700G/70G/705G 7/7 7X/7X Valve opening 0 70 (fully open) mm Valve opening 0 70 (fully open) 70G/7F/70F 7 90C/90C Cv value Valve opening mm inch V- 7

32 ressure loss coefficient Valve opening mm inch ressure recovery coefficientfand Cavitation coefficientkc Valve opening ressure recovery coefficientf Cavitation coefficientkc TT A 0A/0Q 0A/0Q 0Y/0Y 0M HV 7V/ T/7T/7Q T/T 77ZNAV-Z 700G/70G/705G 7/7 7X/7X 70G/7F/70F 7 90C/90C 7 7V-

33 Applicable pipe list in case of A TT A 0A/0Q 0A/0Q 0Y/0Y 0M HV 7V/ T/7T/7Q T/T 77ZNAV-Z mm inch STY Sch0 Sch0 Sch0S Sch0S Minimum internal diameters of piping (mm) G/70G/705G 7/7 7X/7X 70G/7F/70F 7 90C/90C mm inch Applicable pipe list in case of B STY Sch0 Sch0 Sch0S Sch0S Remark : Applicable Not applicable Remark : Butterfly valves are inserted into a pipe that was fitted with the disc when fully open. In cases where you are using a pipe or flange that is less than the minimum inner pipe diameter, use is still possible if means are taken such as inserting a spacer between the valve and flange. For details, please consult us. A B Minimum internal diameter of piping Minimum internal diameter of piping 7V- 75

34 Applicable flange standard mm inch 5K 0K mm inch Can be used without flange drilling. D With flange drilling T With flange tapping Not applicable JIS ANSI BS DIN BS0 K 0K b N0 N N0 N Table E iping bolt and nut sizes JIS5K JIS0K JISK ANSI b ong bolts and nuts Setting bolts ong bolts and nuts Setting bolts ong bolts and nuts Setting bolts ong bolts and nuts Setting bolts -M05 -M0 -M5 -U5/-UNC0 -M0 -M5 -M05 -U5/-UNC5 -M0 -M0 -M0 -U5/-UNC -M0 -M055 -M5 -U/-0UNC5 -M0 -M055 -M70 -U/-0UNC -M75 -M90 -U7/- 9UNC95 -M5 -M0 -U7/- 9UNC0 -M95 -M0()5 -U - UNC0 -M0 -U - UNC55 0-M0 -U /- UN 0-M5 0-U /- UN95 0-M090 -M05 -U /- UN0 -U /- UN5 TT A 0A/0Q 0A/0Q 0Y/0Y 0M HV 7V/ T/7T/7Q T/T 77ZNAV-Z 700G/70G/705G 7/7 7X/7X 70G/7F/70F 7 90C/90C Remark: Bold and nut material: SS00/SS00 and SUS 0/SUS0. ong bold uses full threaded bolt. Use thin hexagon nut. (Use heavy hexagon nut for ANSIb.) A unified screw should have threads per inch if its nominal diameter exceeds inch. Example ong bolts - M 5 ong bolts and nuts (full thread) M N M Setting bolts - M (Hexagon bolts) N M S Setting bolts (Hexagon bolts ) S M Setting bolt holes 7 Setting bolt holes 7V-