SELECT your. distribution SySTEm GLOBAL SPECIALIST FOR ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES

Transcription

1 SELECT your distribution SySTEm GLOBAL SPECIALIST FOR ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES

2 Distribution is an essentia function for the eectrica panes, as we as for contro and circuit protection. As we as purey technica factors (intensity, number of outputs, etc.), the choice of a distribution system is critica regarding impementation, maintenance, operating requirements and possibiity of evoving the panes. To meet a specifications (practices, speed of impementation, ease of maintenance, continuity of service, etc.), Legrand offers three types of soutions: Standard distribution, Optimised distribution and Increased Saftey distribution. A these soutions integrate perfecty with the Legrand power and protection range.

3 Contents The distribution systems at the heart of power offer Standard distribution Universa soutions for traditiona cabing Optimised distribution Innovation for pane buiders...6 Optimised distribution in XL and 800 encosures...8 Optimised distribution in XL encosures Increased Safety distribution system Increased Safety distribution system for high criticaity sites...12 The VX³ IS and HX³ IS distribution systems...14 VX³ IS and HX³ IS bases and distribution bocks Cataogue pages 1

4 DISTrIbUTIOn AT THe HeArT OF With its XL³ encosures, the DX³, DPX³, DPX, DMX³ ranges of circuit breakers and three types of distribution, Legrand offers powerfu soutions adapted to every site. POWer SIMPLIFIeD naming SySTeM TO FACILITATe your CHOICe: CHOOSe One OF LegrAnD'S THree DISTrIbUTIOn SOLUTIOnS HX³ xxx Horizonta distribution Max. rating VX³ xxx Vertica distribution Max. rating Standard distribution HX³/VX³ optimised distribution XL³ encosures Suppy busbars Distribution bocks Supports and busbars VX³ 63 and 125 A HX³ 125 A HX³ 80/125 A pug-in HX³ 400 A VX³ System XL³ 160 XL³ 400 XL³ 800 XL³ Suppy busbars, distribution bocks, busbar supports: universa soutions for a types of pane up to 4000 A. See p.4 The universa SouTion for TradiTiona cabing. Distribution bocks and busbars speciay designed to save time and space in XL³ cabinets and encosures. See p. 6 to 11 TimeSaving and increased SafeTy 2

5 A COMPLeTe range FOr ALL electrical PAneLS XL³ enclosures A range of robust, easy-to-cabe cabinets and encosures, with a fu choice of equipment and accessories for any size instaation up to A. HX³/VX³ is increased Safety distribution SyStem CIrCUIT breaking AnD PrOTeCTIOn Severa ranges of circuit breakers and switches, with a wide choice of breaking capacities and characteristics: - DX³: moduar circuit breakers up to 125 A, - DPX³ and DPX: mouded case circuit breakers up to 1600A, - DMX³: air circuit breakers up to 6300 A. VX³ / HX³-IS XL PrO³ Study software for designing Optimised and Increased Safety panes and seecting the right products. For instaations which require a arge avaiabiity of energy, the Legrand Increased Safety distribution system offers three eves of service. Seep.12to17 continuity of Service the choice of distribution 3

6 UnIVerSAL SOLUTIOnS FOr TrADITIOnAL The Legrand standard distribution can be instaed in any kind of encosure and respects working practices. CAbLIng SUPPLy busbars They enabe distribution to occur very rapidy on the eve of each row, in tota safety, in every pane. They perfecty compement the VX³ automatic connection vertica distribution bocks (see p. 7) MODULAr DISTrIbUTIOn blocks These are mounted on the DIn rai, next to the devices, in a distribution panes. They aow compete freedom of distribution, using traditiona cabing, up to 250 A. Their eectrica and mechanica characteristics are a guarantee of safety. Suppy busbars are avaiabe in one, two, three and four-poe versions and in severa engths. 4

7 SUPPOrTS AnD busbars busbars faciitate power distribution in encosures from 400 to 6300 A. The various Legrand isoating supports enabe numerous configurations to be used within an XL³ encosure: - vertica busbar on the side or at the back of the encosure, - vertica busbar in cabe seeve, - horizonta busbar at top or bottom of the encosure. InPUT AnD OUTPUT TerMInALS COPPer/ALUMInIUM COnneCTIOn boxes faciitate the preparation of power cabe connections. They accept power cabes up to 200 mm². POWer TerMInAL blocks faciitate the creation of output termina bocks for high power outputs. Various versions are avaiabe: copper or auminium cabes, with or without ugs, copper bars. Standard distribution 5

8 InnOVATIOn FOr PAneL builders Legrand optimised distribution is designed to faciitate the work of the pane buider. It reduces fiddy cabing tasks and the need to make copper bars, which requires speciaist toos. The extent of the optimised soutions on offer aows a requirements to be met. HX³ 80/125 A WITH PLUg-In COnneCTIOn Horizonta 4-poe distribution bocks for XL³ 160, 400, 800 and 4000 cabinets and encosures. THe ADVAnTAgeS OF OPTIMISeD DISTrIbUTIOn TIMeSAVIng - Automatic connections - Prefabricated connection kits SPACe SAVIng - COmpact system, fuy integrated into XL³ encosures - Increased safety - Less cabing, secure and asting connections, IP XXb protection Instaation on auminium DIn rais. Automatic, too-free connection of upstream terminas to the distribution bock, with no cabing or tightening, even when the distribution bock is ive but off-oad. The power modue itsef cannot be handed when ive. Freedom to mix 1P, 1P+n, 2P, 3P and 4P devices on the same row It is possibe to suppy the bock via the four-poe power suppy modue or via the head of row MCb Connection modues (L1, L2, L3, n). The phases are baanced freey by choosing the right connection modue. 6

9 VX³63AnD125A AUTOMATIC TerMInALS Four-poe vertica distribution bock to power moduar rows in XL³ 125, 160 and 400 cabinets with 3-6 rows. HX³ 125 A WITH AUTOMATIC TerMInALS Horizonta 4-poe distribution bock for XL³ 160, 400, 800 and 4000 cabinets and encosures. AUTOMATIC TerMInALS: guarantee OF SAFeTy Use of automatic connections saves time but it is aso a guarantee of safety: no risk of oosening nor of forgetting to tighten a termina. Instaation next to rows whie maintaining fu access to protection devices Direct connection with no additiona accessories to IP XXb automatic terminas for fexibe or rigid wires Instaation between rows of devices It is possibe to mix 1P, 2P, 3P, 4P circuit breakers Automatic terminas IP XXb for fexibe or rigid wires optimised distribution 7

10 OPTIMISeD DISTrIbUTIOn In XL AnD 800 A system designed to make ife enclosures simpe for pane buiders with just three types of product: vertica busbars, pug-in distribution bocks and connection kits. VX³ 400 Or VX³ 800 busbar AT back OF enclosure 1 PreFAbrICATeD COnneCTIOn kit connects the busbar to the main device mounted in a vertica position on the pate (up to 1600 A) VX³ busbar instaed at back of encosure: optimised dimensions. C-section tinned copper auminium busbars using a specia process which ensures eectrochemica compatibiity with the copper busbars. 3 HX³ 250 A Or 400 A 3-POLe DISTrIbUTIOn block takes DPX³ and DX³ devices via pug-in support bases. IP xxb distribution bock with direct feed via busbar at rear of encosure or via prefabricated kit and busbar in cabe seeve Connection and disconnection of devices possibe even when ive but off-oad. Support base for device, made up of two parts: - one fixed part which connects to the distribution bock with crimps - one mobie part which takes the device 8

11 VX³ 400 Or VX³ 800 busbar In CAbLe SLeeVe PrOTeCTIOn DeVICeS In VerTICAL POSITIOn 1 Main devices in cabe seeve 2 Prefabricated power suppy kit (up to 630A) 3 VX³ 400 or 800 busbars 4 Connection kits for HX³ distribution bocks 5 DPX³ and DX³ devices on HX³ 250/400 row distribution bocks 6 Moduar row with HX³ 80/125 A pug-in connection distribution bock PrOTeCTIOn DeVICeS In HOrIzOnTAL POSITIOn 1 Main device in encosure 2 Prefabricated power suppy kit (up to 800A) 3 VX³ 400 or 800 busbars 4 Prefabricated connection kit 5 Pate-mounted device optimised distribution 9

12 OPTIMISeD DISTrIbUTIOn In XL enclosures TO 3200 A VX³ busbar SCP busbar 2 Linking interface between XL³ 4000 encosure and SCP busbars 3 DMX³ connection kit on SCP inking interface 4 Connection kits for transfer 5 VX³ 800/1600 busbar behind functiona uprights or in cabe seeve 6 Connection kits for power suppy for VX³ busbars 7 VX³ 800 busbar at back of encosure 8 HX³ 400 A row distribution bocks 9 Prefabricated connection kits 10

13 example OF A COMPArATIVe STUDy OF A MAIn LV DISTrIbUTIOn board FOr A SHOPPIng CenTre DeSIgnIng THe PAneL Main protection device: 2 DMX³ as suppy inverters Output protection: 3 DPX 630 4P, 5 DPX³ 250 4P, 5 DPX³ 160 4P, 3 DX³ 4P, 10 DX³ 2P STAnDArD DISTrIbUTIOn SOLUTIOn encosures depth 975 mm and 2 externa cabe seeves In COMPArISOn WITH THe STAnDArD SOLUTIOn: 7 % LeSS WIDe 25 % LeSS DeeP 33 % FeWer WOrkIng HOUrS not incuding the downstream connection of the DMX³ suppy inverter and the connection of the moduar devices and sma DPX³ MCCbs STUDy COnDUCTeD WITH XL PrO³ Study software for designing Optimised and Increased Safety eectrica panes and seecting the right products. OPTIMISeD DISTrIbUTIOn SOLUTIOn encosures depth 725 mm, 1 externa cabe seeve, 1 interna cabe seeve. optimised distribution 11

14 DISTrIbUTIOn In ight of increasing service continuity requirements, the abiity to work on panes whie they are ive is crucia. The Legrand Increased Safety distribution soutions offer an innovative response to service continuity requirements by providing a viabe aternative to drawered encosures. IS FOr HIgH CrITICALITy SITeS OPerATIOn is X-- This figure shows the pane accessibiity conditions for carrying out work on the instaation. MAInTenAnCe is -X- This figure shows the pane accessibiity conditions for maintaining the instaation. is 1-- Compete shutdown of the pane. is -1- Compete shutdown of the pane. THe IS SerVICe rating For the safety of persons, standard IeC & 2 defines two concepts: the forms of separation and the withdrawabiity index. Legrand goes further with the IS service rating. The three numbers of the IS service rating represent the eve of response to service continuity requirements in three types of intervention: operation, maintenance and evoution. 1: ow 2: medium 3: high is 2-- Compete stop of the functiona unit concerned. TEST is 3-- Cutoff power contacts of the functiona unit concerned. Aows automation test, in order to check instaation. is -2- Interruption imited to the functiona unit concerned. The repacement requires an intervention on downstream connections. is -3- Interruption imited to the functiona unit concerned. The repacement wi be competed without intervention on connections. 12

15 evolution is --X This figure shows the pane accessibiity conditions for evoving the instaation. FOrMS OF SePArATIOn The forms of separation defined by IeC standard are the barriers to be put in pace in distribution assembies to ensure different eves of protection against contact with hazardous parts. is --1 Compete shutdown of the pane. Main criterion Sub-criterion ForM no interna separation Form 1 Separation of busbars and functiona units. terminas for externa conductors not separated from busbars Form 2a terminas for externa conductors separated from busbars Form 2b Separation of busbars and functiona units and separation of a functiona units from each other. Separation of terminas for externa conductors from functiona units but not the terminas for other functiona units. terminas for externa conductors not separated from busbars terminas for externa conductors separated from busbars Form 3a Form 3b is --2 Interruption imited to the functiona unit concerned. reserves of functiona units are panned. Separation of busbars and functiona units and separation of a functiona units from each other. Separation of terminas for externa conductors associated with one functiona unit from those of a the other functiona units and the busbars. terminas for externa conductors in the same compartment as the associated functiona unit terminas for externa conductors which are not in the same compartment as the functiona unit with which they are associated but in separate and encosed protected spaces or individua compartments Form 4a Form 4b WITHDrAWAbILITy InDeX The withdrawabiity index, according to standard IeC , defines the type of eectric connection for the functiona units (FU). is --3 Addition of any type of functiona unit in an unequipped ocation, without powering off the pane. 1 St etter 2 nd etter 3 rd etter type of eectrica connection for the main incoming circuit type of eectrica connection for the main outgoing circuit type of eectrica connection for the auxiiary circuits F = for fixed connections D = for disconnectabe connections W= for withdrawabe connections corresponds to the foowing types of circuit breakers: fixed, pug-in, draw-out increased Safety distribution SyStem 13

16 With its new Increased Safety distribution system, Legrand offers three eves of service for so-caed high criticaity sites where it is impossibe to shut down the network for maintenance (hospitas, computer rooms, etc.) ADVAnTAgeS OF THe LegrAnD InCreASeD SAFeTy (IS) DISTrIbUTIOn SySTeM: TIMeSAVIng - ease of fitting - ease of cabing (automatic feed crimping) SIMPLICITy AnD economy - responds to a eves of the IS service rating (ease of maintenance and evoution whie ive) - It is possibe to power motor contros - IS 223 possibe with moduar devices - Safety of intervention for users. VX 3 IS AnD HX 3 IS DISTrIbUTIOn SySTeMS VX 3 IS COLUMn CHASSIS The tinned cooper auminium bars of the IS coumn chassis, thanks to their excusive design, faciitate automatic connection of the IS bases ensuring the quaity and ongevity of the contacts. 1 XL³ 4000 encosure, height 2200 mm, depth 725 or 975 mm 2 VX³ IS coumn chassis deivered with isoating profies to ensure the IPXXb takes the VX³ IS bars (1250 A or 2000 A) 3 VX³ IS bases. The base is fixed on the VX³ IS coumn chassis. The withdrawabe pate takes the protection device. 4 Universa bases (IS 223, 233 and 333), take any kind of functiona unit 5 The HX³ IS 400 A row distribution bock takes mouded case and moduar devices 6 The HX³ IS 125 A row distribution bock takes moduar devices 7 Partitioning - faciitating forms 3b and 4b Products may be handed when ive but protection and switching devices must be off-oad when being inserted or withdrawn. 14

17 CHOOSe your SerVICe LeVeL FrOM AMOng THe THree LegrAnD InCreASeD SAFeTy (IS) SOLUTIOnS The three Legrand soutions offer everybody the possibiity of adding new devices in unequipped ocations, without cutting power to the pane, something that was unthinkabe with traditiona soutions (withdrawabe forms and devices). is 223 (DDF, FOrM 3b): High criticaity site, shutdown of functiona unit permitted, requiring work on connections. evoution of the instaation whie ive: it is possibe to add a device without cutting power to the pane. is 233 (DDD, FOrM 3b): Highy critica site, power shutdown permitted for testing. evoution + maintenance whie ive: no intervention on the upstream connection, no intervention on the downstream connection. is 333 (WWW, FOrM 3b): extremey critica site, continuity of service essentia evoution + maintenance + operation whie ive: position test to enabe verification that the auxiiaries are functioning correcty. SUMMAry OF THe LegrAnD response according to service index stringency eves Minimum expected is egrand is soutioin Maximum form in egrand soution Withdrawabiity index in egrand soution 111 Fixed versions 1 4b FFF b 2 dff/dfd b 2 dff/dfd b 2 dff/dfd b 2 dff/dfd b ddd b ddd b ddd b WWW b WWW b WWW b WWW b WWW b WWW b WWW 1: with rotary hande on door for main device 2: using externa terminas increased Safety distribution SyStem 15

18 VX 3 IS AnD HX 3 IS bases AnD The IS bases for DPX and DPX 3 and the universa bases satisfy eves IS 223, IS 233 and IS 333 service ratings. The IS distribution bocks satisfy eve IS 223. DISTrIbUTIOn blocks VX³ IS 223 base FOr DPX³ AnD DPX CIrCUIT breakers - Upstream connection via the base - Downstream connection directy to the circuit breaker terminas VX³ IS 233 base FOr DPX³ AnD DPX CIrCUIT breakers - Upstream connection via the base - Downstream connection via the base 3 VX³ IS 333 base FOr DPX³ AnD DPX CIrCUIT breakers - Upstream connection via the base - Downstream connection via the base - Connection of auxiiaries on withdrawabe connector base: direct connection to the coumn chassis 2 Withdrawabe pate: takes the device and sots into the base 3 Downstream connection 4 Termina shied Itispossibetoaddafunctiona unit whie ive. repacement of a functiona unit in ess than one hour. 1 base: direct connection to the coumn chassis 2 Withdrawabe pate: takes the device and sots into the base 3 Downstream connection 4 Termina shied Itispossibetoaddafunctiona unit whie ive. repacement of a functiona unit in ess than quarter of an hour. 1 base: direct connection to the coumn chassis 2 Withdrawabe pate: takes the device and sots into the base 3 Downstream connection 4 Termina shied 5 Withdrawabe cpnnector for auxiiary circuits Itispossibetoaddafunctiona unit whie ive. repacement of a functiona unit in ess than quarter of an hour. Lockout of the functiona unit to aow testing of off-oad auxiiary circuits. 16

19 125 A HX³ IS 223 DISTrIbUTIOn block - For DX³ circuit breakers - Upstream connection via the distribution bock - Downstream connection directy to the circuit breaker terminas 400 A HX³ IS 223 DISTrIbUTIOn block -ForDX³andDPX³circuitbreakers - Upstream connection via the distribution bock - Downstream connection directy to the circuit breaker terminas 1 UnIVerSAL bases IS 223, IS 233 AnD IS 333: Aowing devices which do not have a dedicated base to be mounted (for exampe, motor contactors) base: direct connection to the coumn chassis 2 Withdrawabe distribution bock: takes the devices equipped with support bases, sots into the base and ensures the upstream connection of the devices 3 Connectors for moduar devices 4 Downstream connection Itispossibetoaddadevice whie ive. It is possibe to add a row whie ive. repacement of a functiona unit in ess than one hour. 1 base: direct connection to the coumn chassis 2 Withdrawabe distribution bock: takes the devices equipped with support bases, sots into the base and ensures the upstream connection of the devices 3 DPX³ support base 4 Moduar support base 5 Downstream connection Itispossibetoaddadevice whie ive. Possibe addition of a row whie ive. repacement of a functiona unit in ess than one hour. increased Safety distribution SyStem 17

20 Suppy busbars and distribution bocks Isc peak 17 kâ Lenght Prong-type Suppy busbars from 63 to 90 a Universa 1-poe + neutra or 1-poe 2-poe 2-poe baanced on 3-phase 3-poe 4-poe 1 row meter Fork-type 1 row meter Isc peak 10 kâ number of outputs DIstrIbUtIon terminal blocks From 63 to 100 a bar termina bocks Insuated termina bocks IP 2X (XXb) with screws on support back bue green Isc peak 14.5 to 42 kâ admissibe maximum rating (a) modular DIstrIbUtIon blocks From 40 to 250 a 2-poe 4-poe termina bocks IP 2X number and section of fexibe conductors (mm 2 ) number and section of fexibe conductors (mm 2 ) additiona outputs cat.nos Inputs outputs cat.nos Inputs outputs earth neutra (mm 2 ) x x x x x x 16 5 x x 16 5 x x x 25 2 x x x 25 2x16+7x x x 25 2 x x x x x x 120 1x25+1x16 +14x10 2x25+4x16 +8x10 1x35+2x25 +2x16+6x x x 6 Isc peak 27 to 60 kâ single PoLe modular DIstrIbUtIon blocks and DIstrIbUtIon terminals From 125 to 250 a admissibe maximum rating (a) cat.nos number and section of conductors per poe (mm 2 ) Inputs outputs x x x 50 (fexibe bar 13 mm max.) 3 x x x (distribution termina) Direct into the downstream termina 6 x x 120 (fexibe bar 16 mm max.) 6 x x (distribution termina) Direct into the downstream termina 4 x x 25 Isc peak 20 to 75 kâ admissibe maximum rating (a) 125 PoWer DIstrIbUtIon blocks From 125 to 400 a extra-fat number and section of conductors per poe (mm 2 ) stepped number and section of conductors per poe (mm 2 ) cat.nos Inputs outputs cat.nos Inputs outputs x x 16 (Ph) 17 x 16 (N) bars12x4mmreceiving 5 connectors 2 x 10 each x 35 5 x x 70 5 x x x70or1x x 35 or 2 x x x x Ø8.5 mm x hoes M6 70 mm 2 max. connectors 15 hoes M6 15 hoes M8 18

21 Suppy busbars, entry terminas "standard" distribution Suppy busbars, entry terminas "standard" distribution n technica characteristics Pack Cat.Nos Prong-type suppy busbars Universa singe poe + neutra Reversibe: bue for neutra, back for ive Length Max. number of devices connected row Meter 57 Doube poe row Meter 28 singe poe or singe poe + neutra Doube poe Doube poe baanced on 3-phases tripe poe Four poe busbars types max. number of devices connected n Use of suppy busbars Universa singe phase + neutra - bue for neutra - back for ive Length in number of 17.5 mm modues cross section (mm 2 ) Permissibe current: 1 centra power suppy point 2power suppy point 1 row Meter row Meter row Meter row Meter row Meter Doube poe baanced on 3 phases row Meter 28 tripe poe row Meter 19 Four poe row Meter 14 Fork-type suppy busbars singe poe Length Max. number of devices connected row Meter 57 Doube poe Meter 28 entry termina Power suppy at the rear of the busbar For a devices with moving cage terminas Power suppy at the front of the busbar For a devices with fixed cage terminas tripe poe row Meter 19 Four poe Meter 14 Four poe busbar Protection Protection of prongs modues Can be cut to ength Protection of suppy busbar ends For singe poe/singe poe + neutra For doube poe ength 1 m and tripe poe For four-poe entry terminas For universa singe poe + neutra or singe poe suppy busbars Cross section: 4 to 25 mm 2 - IP 2X For a suppy busbars Cross section: 6 to 35 mm 2 1: Fied with end protection 19

22 Distribution termina bocks Distribution termina bocks n mounting of termina bocks on support on12x2fatbar / on support for termina bocks cat.no Enabes you to make exacty the right number of connections Exampe: Pack Cat.Nos Distribution termina bocks Conform to standard IEC Suppied ready for use (screws not tightened) 100 A max V± with 25 mm 2 input 80 A max V± with 16 mm 2 input screw termina bocks Fit with Ø M4 screws Number of connections (mm 2 ) Length (mm) x6to25+4x1.5to x6to25+8x1.5to x6to25+14x1.5to x6to25+19x1.5to x6to25+25x1.5to termina bocks on support Mounting on 4 or 1 rai with universa support Cat.No , or on 12 x 2 fat bar SuppiedwithDupixmarkers x1.5to x1.5to x6to25+12x1.5to x6to25+16x1.5to x6to25+21x1.5to x6to25+33x1.5to IP 2X termina bocks Mounting on 4 or 1 rai with universa Phase Neutra support Cat.No , or on 12 x 2 fat (back) (bue) bar x10to35+5x6to x1.5to x1.5to x6to25+12x1.5to x6to25+16x1.5to x6to25+21x1.5to x6to25+33x1.5to Earth (green) x1.5to x1.5to x6to25+12x1.5to x6to25+16x1.5to x6to25+21x1.5to x6to25+33x1.5to supports for termina bocks Distribution bock support for connecting up to 4 IP 2X termina bock of the same size to create a distribution bock Universa support for mounting an termina bocks on 3 or 1 rai hoes empty support, for screw termina bocks Length: 276 mm Fat bar 12 x Length: 1 meter Universa support cat.no Mounted on 4 or 1 rai, takes a termina bocks on distribution bock support cat.no Possibiity of forming a 2P, 3P or 4P distribution bock by associating IP 2X termina bocks : Each termina bock is suppied with: -2greenDupixmarkedT-2bueDupixmarkedN -2redDupixmarkedL 20

23 Moduardistributionbocks 40 to 250 A Technica characteristics p Standard distribution Connection with or without Starfix ferrues Sef-extinguishing, according to EN : 960 C on active part supports Pack Cat.Nos monoboc moduar distribution bocks Pack Cat.Nos moduar distribution bocks Mounting on rai 4 or on pate with 2 screws Suppied with insuated back pate and transparent protective front cover Each bar can be abeed using CAB 3 Possibe to add IP 2X termina bock (except Cat.No ) Doube poe Equipped with 2 bars Connections per bar Rating (A) rigid (mm²) x1.5to4 2x6to x2.5to10 2x10to x2.5to10 2x10to25 2x10to35 Four poe fexibe (mm²) 11x0.75to4 2x4to10 5x1.5to10 2x6to16 11 x.5 to 10 2x6to16 2x10to25 Equipped with 4 bars Connections per bar Rating rigid (A) (mm²) x1.5to4 2x6to x2.5to10 2x10to x2.5to10 2x10to25 2x10to x2.5to10 4x10to x2.5to10 1x10to25 1x10to x 2.5 to 10 4x10to25 2x10to35 1x35to x2.5to16 2x10to25 2x10to35 1x16to50 1 x 50 to 120 fexibe (mm²) 11x0.75to4 2x4to10 5x1.5to10 2x6to16 7x1.5to10 2x6to16 2x10to25 11x1.5to10 4x6to25 14x1.5to10 1x6to16 1x6to25 1x16to35 8x1.5to10 4x6to16 2x10to25 1x35to70 6x2.5to10 2x6to16 2x10to25 1x16to35 1 x 50 to 120 Isc peak (kâ) Number of modues Icw (ka) Isc peak (kâ) Number of modues Icw (ka) Mounting on rai 4 Fitted with Lexic abe hoder Canbejoinedtogether Possibiity of forming a four poe distribution bock by adding modues singe poe Connections per bar Rating (A) rigid (mm²) x16to50 12 x 1.5 to x35to70 7x2.5to10 2x6to25 3x10to x70to150 4 x 2.5 to 16 6x10to35 Distribution terminas fexibe (mm²) 4x16to35 12x1.5to10 1x25to50 7x1.5to6 2x6to16 3x10to25 1x70to120 4 x 2.5 to 10 6x10to A - 6 outputs 25 mm 2 fexibe Can be fitted directy onto downstream termina of DPX 3 160, Vistop 100/160 A and DX H 125 A A - 4 outputs 35 mm 2 fexibe and 2 outputs 25 mm 2 fexibe Can be fitted directy onto downstream termina of DPX ER and DPX-IS 250 Isc peak (kâ) Number of modues Isc peak (kâ) : With short ferrue suppied for fexibe connection 25 mm 2 2: Incoming conductors must be equiped with ferrues Connection: 25 mm 2 witth ferrues without insuating fange 21

24 Power distribution bocks Moduardistributionbocks 40 to 250 A Conform to EN Insuating votage according to EN / IEC : 500 V Impuse votage (Uimp): 8 kv - Degree of poution: 3 UseinDC:withoutderating Sef-extinguishing 960 C on active parts supports "Standard" distribution Suppied with screen protection Pack Cat.Nos extra-fat for ugs 125 a Fixing on rai EN or on pate with M6 screws. Equipped with: -1incoming35mm 2 (possibe tapp-off) - 10 phase outgoing 16 mm 2 - M5 screws - 17 neutra outgoing 16 mm 2 - M5 screws Connection possibe using connector Cat.No a Fixing on pain pate or on pate with M6 screws Distribution bock 1 incoming 150 mm 2 per poe: -1poeiscomposedof3parts - Each part can receive: 1 x 70 mm 2 or 1 x 50 mm 2 and1x35mm 2, or 2 x 35 mm 2 or 1 connector with 3 outgoing terminas Cat.No (p. 25) stepped for ugs 125 a Fixing on rai EN depth 15 mm or on pate with screws Ø4 mm (by removing caws) 4 bars 12 x 4 mm with five connectors 2 x 10 mm 2 / bar(notmounted) Fixing on rai EN , withcaws Cat.No or on pate with M6 screws 4 bars 15 x 4 mm suppied with: -1incoming35mm 2 - M8 screws -5outgoing25mm 2 - M6 screws 160 a Fixing on rai EN , withcaws Cat.No or on pate with M6 screws 4 bars 18 x 4 mm suppied with: -1incoming70mm 2 max. - M8 screws -5outgoing35mm 2 - M6 screws 250 a Fixing on rai EN , withcaws Cat.No or on pate with M6 screws 4 bars 25 x 4 mm suppied with: -1incoming120mm 2 - M10 screws -5outgoing50mm 2 - M8 screws 400 a Horizonta mounting in XL cabinets, vertica in XL cabe seeve, vertica in XL interna cabe seeve or on soid pate using the M6 screws suppied Distribution bock consisting of 4 tin-coated bars 32 x 5 mm with insuated protection Composition of each bar: -2xØ8.5mmuntappedhoesforpowersuppy (fexibe bars, ) - 21 outgoing M6 hoes (70 mm 2 ugs max.) Fixing on rai EN , withcaws Cat.No Distribution bock consisting of 4 bars 32 x 5 mm Composition of each bar: -2xØ10.5mmuntappedhoesforpowersuppy (185 mm 2 max.) - 15 outgoing M6 hoes, 4 outgoing M8 hoes n monoboc moduar distribution bocks Doube poe a, cat.nos /80/ w Four poe a, cat.nos /84/86/ w Four poe 125 a cat.no Four poe 160 a, cat.no w Four poe 250 a, cat.no Sef-extinguishing 960 C according to EN W W cat.nos Width (mm)

25 n moduar distribution bocks singe poe a, cat.nos /83/ connection a 160 a 250 a Cat.No Torque 3.5 Nm 10 Nm Cat.No Torque 3.5 Nm ndistribution terminas, cat.nos / a 250 a Cat.No Torque 24 Nm Ø10 n section for connecting rigid or fexibe conductors (with starfix ferrues) Distribution bocks cat.nos connections per bar number Ø (mm) rigid conductors section (mm 2 ) Fexibe conductors with ferrues section (mm 2 ) starfix ferrues cat.nos to to to to to to to to to to to to to to to to to to to to35 70to to to to to 25 6 to to 70/ to to to to16 4to /68/ to to to to 25 6 to to 70/ to to /72/ to to to to 10 6 to /69/ to to / to to to 77/ to to to to 25 6 to to 70/ to to to to16 4to /68/ to to to to 25 6 to to 70/ to to / to to to to 35 6 to to to to / to to to to 25 6 to to 70/ to to / to to to to 25 6 to to 70/ to 35 6 to to 70/ to to to to to to 25 6 to to 70/ to to to to to to 72/ to to n characteristics of distribution bocks for use in photovotaic instaations no of 18 mm modues cat.no max. cross-section for "soar cabe" max. e (a) current t = (+40 c/+60 c) Iec singe poe distribution bock Ui (V) Degree of poution 2 Iec : Suppementary insuation provided for the support rai in the context of appication of UTE C doube insuation 2: Impuse votage tested at 12 kv in the context of appication of UTE C doube insuation Impuse votage Uimp Iec x16to25mm 2 12x1.5to6mm 2 or 6 x 10 mm 125/ V 2 (1) 8kV (2) Doube poe distribution bocks 5 x 1.5 to 6 mm 2 2x6to16mm 2 100/ V (1) 8kV (2) 11 x 1.5 to 6 mm 2 2x6to16mm 2 125/ V (1) 8kV (2) 2 x 10 to 25 mm 2 n Use of IP 2X termina bocks moduar IP 2X distribution termina Derating bocks bocks Votage rating (1) 400 V 80 A (1) 400 V 40 A (1) 400 V 100 A (2) 400 V 80 A (2) 400 V 40 A (2) 400 V 100 A (2) 400 V 100 A (2) 400 V 100 A (2) 400 V 100 A 1: T 2: Neutra

26 Power distribution bocks n extra-fat for ugs 125 a cat.no Isc peak 25 kâ Insuating votage according to EN / IEC : 500 V Sef extinguishing: 960 C according to EN n stepped for ugs 125 a cat.no Isc peak 20 kâ Insuating votage according to EN / IEC : 600 V Sef extinguishing: 850 C according to EN N a cat.no Isc peak 60 kâ Insuating votage according to EN / IEC : 1000 V Sef extinguishing: 960 C according to EN N 125/160/250 a cat.nos /31/35 - Isc peak 35 kâ Insuating votage according to EN / IEC : 1000 V Sef extinguishing: 850 C according to EN Uimp:12kV,degreeofpoution:3 A I J M8 connection width 35 mm B H M6 connection width 35 mm C D E F G Dimensions (mm) 400 a (1) cat.no Isc peak 42 kâ Insuating votage according to EN / IEC : 1000 V Uimp:12kV,degreeofpoution:3 Sef extinguishing: 960 C according to EN Distribution bocks a b c D e f G H I J 125 a a a cat.no Isc peak 50/75 kâ Insuating votage according to EN / IEC : 1000 V fixing centres 50 mm,1500 V fixing centres 75 mm Uimp: 8 kv fixing centres 50 mm, 12 kv fixing centres 75 mm Degree of poution: 3 1: Horizonta mounting with minimum facepates height 300 mm 24

27 Connection Connection n connectors Cat.No Cat.No Ø Ø Cat.No ,5 Ø10x on copper bar "Standard" distribution Pack Cat.Nos connectors With 3 outgoing terminas 200 a Fits onto fat copper bars and distribution bock Cat.No (p. 22) Capacity: -1x Ø5.3mmoutgoingtermina for 1.5 to 6 mm 2 connection -2xØ7.5mmoutgoingterminas for6to16mm 2 connection With 6 outgoing terminas 250 a Fits onto C section auminium bars with M10 hammer head bot Cat.No or onto fat copper bars Capacity: -4x6to35mm 2-2x6to25mm 2 With 7 outgoing terminas 400 a Fits onto fat copper bars Capacity: -4x Ø5.3mmoutgoingterminas for 1.5 to 6 mm 2 connection -3xØ7.5mmoutgoingterminas for6to16mm 2 connection auminium/copper distribution boxes upto300mm 2 Adapt the cross-section of the incoming or outgoing cabe in order to connect a device IP 2X box, sef-extinguishing transparent cover Universa fixing on 4 rai or on pate Reversibe seaabe cover with area for abe Operationa votage: Ue = 690 V± according to EN /IEC Auminium connection Conform to standard NFC cass B Copper connection Conform to standard EN Suppied with copper couping strip Auminium/copper 120 mm 2 distribution box 300 A max. Incoming: 16 to 120 mm 2 Auminium or 16 to 120 mm 2 copper Outgoing: 16 to 70 mm 2 copper Auminium/copper 300 mm 2 distribution box 540 A max. Incoming:70to300mm 2 Auminium or 70 to 185 mm 2 copper Outgoing: 70 to 150 mm 2 copper Junction boxes IP 30 - Ik 07 For copper cabes 4 connections per poe Reversibestirrupforzerocamping Fitted with 4 or 5 junction bocks mounted on an insuated strip with a sheet stee cover Knock-out entries for conduits Ø9 and 21 mm Seaabe cover screws RAL 7032 Poes Cabe section (mm 2 ) Rated current (A) n auminium/copper distribution boxes technica characteristics Dimensions Cat.No Cat.No connection Junction AI/Cu n Junction boxes ØG F 13,5 13, Cu 152 AI/Cu A 45 Cu E AI/Cu A C D Distribution AI/Cu connecting in series This bridging is made with 2 copper bars (suppied with each product) and accept max. rating of incoming cabe for tap-off between 2 distributions boards 31 cat.nos a (mm) c (mm) D (mm) e (mm) f (mm) G (mm) , Cu Ø 8,9 x 2 cat.no cat.no Impuse votage (Uimp) short-circuit current 10 kv 12 kv Icw for 1 second 14.5 ka 22.2 ka tightening torque 14 Nm 30 Nm

28 Busbars supports seection standard distribution max. In (a) supports Fat copper bars c-section auminium bars mounting / /25 XL / / 86/ Vertica at back of cabinet or encosure Vertica at back of cabe seeve XL Vertica at back of cabinet or encosure Vertica at back of interna cabe seeve Vertica at back of externa cabe seeve XL D (mm) Main horizonta at top or at bottom of cabinet D: 475 D: 725 D: (5) (5) (5) (6) (5) (1) (1)(7) (7) D (mm) Horizonta transfer D: 725 D: (4+5) (5) (1) D (mm) D (mm) W (mm) W (mm) Vertica atera inside cabe seeve Vertica atera inside cabinet behind upright Vertica at back of cabinet Horizonta at back of cabinet D: 475 D: 725 D: 975 D: 725 D: 975 W: 475 W: 725 W: 975 W: 475 W: 725 W: (3) (3) (3) (1) (1) (1) (1) (1) (1) (1) (1) (2) (1) (3) (3) (3) (3) (3) (3) : With upright Cat.No in cabe seeve - 2: Depth min. 725 mm - 3: Fixed supports ony - 4: Inside compementary cabe seeve - 5: Partia chassis - 6: With crosspieces Cat.No : With crosspieces Cat.No

29 Isoating supports for busbars XL 3 cabinets and encosures Dimensions p. 31 Distances between the supports p. 28 "Standard" distribution Pack Cat.Nos 1 bar per poe universa supports 280 a Singe poe support for fat copper bars 12x2or14x4mm Singe poe support for fat copper bars 15x4,18x4or25x4mm Setof2fourpoesupports for fat copper bars 12x2or12x4mm Setof2fourpoesupports for fat copper bars 15x4or18x4mm Setof2fourpoesupports forfatcopperbars25x4mm 1 bar per poe 400 a Support for fat copper bars 18x4,25x5and32x5mm For XL cabinets and encosures Support for fat copper bars 18 x 4, 25x4,25x5and32x5mm, in soping position to create a vertica busbars at back For direct mounting on soid or perforated pate 800 a Support for fat copper bars 18x4,25x5,32x5,50x5and 63x5mminsopingposition 1000 a Support for fat copper bars 50x5,63x5,75x5and80x5mm instaggeredposition Pack Cat.Nos 1 or 2 bars per poe Supports for fat copper bars 50x5,63x5,75x5,80x5and 100x5mm,inaignedposition 1600 a Fixed support Additiona support MountedinadditiontofixedsupportCat.No to compy with the distances (Isc withstand) 1 to 4 bars per poe Supports for 4 fat bars from 50x5to125x5mmor3barsfrom 50 x 10 to 120 x 10 mm, in aigned position 4000 a Fixed support Additiona support Mounted in addition to fixed support Cat.No to compy with the distances (Isc withstand) Fixing supports adjustabe crosspieces Set of 2 crosspieces ength 350 mm Set of 2 crosspieces ength 600 mm Set of 2 crosspieces ength 850 mm Crosspieces for partia chassis Set of 2 fixed crosspieces ength 350 mm Set of 2 fixed crosspieces ength 600 mm extension piece For mounting busbars supports Cat.No in XL and 4000 cabinets and encosures 27

30 Isoating supports for busbars n Peak current Ipk The distance between the busbar supports depends on the eectrodynamic forces generated when there is a short-circuit, these being directy proportiona to the peak vaue of the short-circuit current (Ipk) Two methods can be used to determine the peak current vaue according to data that is generay avaiabe: Using the imiting capacity of the protective devices The imitation curves of the protective devices (DX and DPX) give the imited peak current according to the prospective short-circuit current The "Non-imited peak Isc" curve corresponds to no protection The tabe opposite gives the imited peak vaue (Ipk) for a maximum prospective short-circuit vaue equa to the breaking capacity (Icu) of the device For ower prospective short-circuit vaues, reading the curves wi provideanoptimisedvaue rating Isc peak max. (a) (kâ) DPX DPX DPX DPX DPX to DPX 250 er 100 to DPX 250 A 27 DPX-H 250 A 34 DPX 630 A 34 DPX-H 630 A 42 DPX 1600 A 85 DPX-H 1600 A 110 Isc peak Isc imited peak Isc non-imited peak prospective Isc Isc RMS. the peak vaue is much higher if Therearenoimitingprotectivedevices This vaue is cacuated by appying a coefficient of asymmetry (n) to the prospective rms vaue shown in the tabe opposite Isc prospective rms (ka) n <I <I <I <I 2.2 n Determining the distances between the supports D E maximum distances "D" (mm) e adjustabe supports bars (12 x 2) or (12 x 4) (15 x 4) or (18 x 4) or (25 x 4) e (mm) Isc peak (Ipk in kâ) maximum distances "D" (mm) e fixed supports bars / (12x2) (12x4) (15x4) (25x4) (18x4) (25x4) (25x5) (32x5) (18x4) (25x5) (32x5) (18 x 4) Isc peak (Ipk in kâ)

31 n Determining the distances between the supports (continued) maximum distances "D" (mm) - e fixed: 75 mm supports fat bar per poe 1 fat bar per poe bars (18x4) (25x5) (32x5) (50x5) (63x5) (50x5) (63x5) (75x5) (80x5) Isc peak (Ipk in kâ) maximum distances "D" (mm) - e fixed: 75 mm supports , fat bar per poe 2 bars per poe bars (50x5) (63x5) (75x5) (80x5) (100x5) (50x5) (63x5) (75x5) (80x5) (100x5) Isc peak (Ipk in kâ) additiona support: Horizonta busbars (1) Mounted in addition: - to 2 fixed supports in encosure width725et975 - to fixed support in cabe seeves width 475 Vertica busbars Mounted in addition to 3 fixed supports if necessary 1: In case of fat bar mounting, use fixed support ony maximum distances "D" (mm) supports /66/67/ /68/69 1 c-section auminium bar per poe 1 c-section auminium bar per poe bars Isc peak (Ipk in kâ)

32 Isoating supports for busbars maximum distances "D" (mm) with bars thick 5 mm - e fixed: 125 mm supports , bar per poe 2 bars per poe 3 bars per poe 4 bars per poe bars 50x5 63x5 75x5 100 x x 5 50 x 5 63 x 5 75x5 100 x x 5 50 x 5 63 x 5 75x5 100 x x 5 50 x 5 63 x 5 75x5 80x5 80x5 80x5 80x5 100 x x 5 Isc peak (Ipk in kâ) maximum distances "D" (mm) with bars thick 10 mm - e fixed: 125 mm supports , bars 1 bar per poe 2 bars per poe 3 bars per poe 80 x x x x x x x x x 10 Isc peak (Ipk in kâ) additiona support: Horizonta busbars (1) Mounted in addition: - to 2 fixed supports in encosure width725et975 - to fixed support in cabe seeves width 475 Vertica busbars Mounted in addition to 3 fixed supports if necessary 1: In case of fat bar mounting, use fixed support ony n Insuating characteristics EN /IEC (degree of poution: 3) cat.nos / / / /51/66/67/68/69/86 Ui (V) Uimp (kv)

33 n Dimensions cat.no Sidefor12x2mmbar Viewfromabove cat.no cat.no cat.no Sidefor12x4mmbar Ø Ø = = 42 = = cat.no cat.no cat.no cat.no cat.no copper bar Dim. (mm) 50x5 63x5 75x5 80x5 a fixing centre A fixing centre 325 cat.no (fixed support) A B cat.no (additiona support) A B copper bar Dim. (mm) 50x5 63x5 75x5 80x5 100x5 a b fixing centre 325 cat.no (fixed support) A min. 567 / max. 630 B cat.no (additiona support) A bars thick 5 or 10 mm cat.nos Dim. (mm) h75 h80 h100 h120 h125 a b a cat.nos /51/66/69 cat.nos /69 35 A A B C D A E F F E Ø A A A B C D Ø6.5 cat.nos a b c D e f E F F E 31

34 Fat copper bars seection standard distribution 400 a 800 a 1000 a Fat busbars supports Cat.No Cat.No Cat.No Cat.No Fat copper bars cat.nos cross section (mm) number of bar per poe I (a) I (a) I (a) I (a) IP 30 IP > 30 IP 30 IP > 30 IP 30 IP > 30 IP 30 IP > x x x x x x x x x x x x x

35 Copper bars and accessories 1600 a 4000 a Cat.Nos /23 Cat.Nos /25 bar mounting: bar mounting: fat edgewise bar mounting: edgewise bar mounting: fat I (a) I (a) I (a) I (a) IP 30 IP > 30 IP 30 IP > 30 IP 30 IP > 30 IP 30 IP > "Standard" distribution Pack Cat.Nos copper bars rigid, fat, threaded hoes Cross section Ipermissibe(A) Hoes Length (mm) IP 30 IP >30 Ømm (mm) x M x M x M x M x M x M x M rigid fat cear hoes Cross section Ipermissibe(A) Hoes Length (mm) IP 30 IP >30 Ømm (mm) 50x x x x x Fexibe Suppied fat, ength 2 m Cross section (mm) I(A) IP 30 IP > x x x x x x accessories Isoating profie 1/ Isoating profie for fat copper bars 18 x 4, 25x4,25x5and32x5mm,ength1m Suppied with fixing cips Insuating screws M6 x 10 HF screws with contact washe M6 x Ø8,

36 VX³ optimised distribution system seection VX³ distribution system Imax (A) Mounting Cat.Nos Pexo³ XL³ 125 XL³ 160 XL³ 400 XL³ 800 XL³ 4000 VX³ 4-poe automatic terminas vertica distribution bock (p. 36) 63 A side-mounted 125 A side-mounted For cabinets with3rows: 4rows: 5rows: 6rows: For cabinets with4rows: 5rows: 6rows: (1) 400 A (p. 40) Vertica at back of encosure Vertica in cabe seeve Insuated backpate: Support: Supp. for ug: 250Abar: 400Abar: Support: Supp. for ug: 250Abar: 400Abar: A Vertica at back of encosure Support: Supp. for ug: 800Abar: (p. 41) Vertica in externa cabe seeve Support: Supp. for ug: 800Abar: VX³ busbars 630 A bar: A bar: A bar: A bar: A bar: XL³ 4000 Positions of bars Aigned Stepped: Fixing centres of bars 75 mm 125 mm 75 mm 125 mm Fixed support / Additiona support L: 475 mm L (mm) vertica en fond d'armoire L: 725 mm L: 975 mm 1600 A (p. 42) P (mm) Side-mounted vertica in encosure behind uprights D: 475 mm D: 725 mm (2) D: 975 mm (2) D: 475 mm (2) Vertica in cabe seeve* D: 725 mm (2) P (mm) D: 975 mm (2)(3) (3) (3) (3) D: 475 mm (2) Horizonta top or bottom D: 725 mm (2) P (mm) D: 975 mm (2) D: 475 mm Horizonta transfer D: 725 mm (2) P (mm) D: 975 mm (2) 1: XL ony 2: Ony these configurations take the VX 3 optimised prefabricated connection kits 3: With upright Cat.Nos /51 34

37 HX³ optimised distribution system seection HX³ distribution system Imax Cat.Nos HX³universasinge poe prong-type busbar (p. 19) HX³ 4-poe prong-type busbar (p. 19) HX³ 4-poe automatic terminas distribution bock (p. 37) HX34-poepug-in distribution bocks (p. 38) HX³4-poerow distribution bocks (p. 39) 63 A 63 A 125 A (13modues) (57 modues) (6modues) (12 modues) (18 modues) (1 row) (1/2 row) (24 modues) 80 A (36 modues) A (1) (24 modues) (1) (36 modues) 250 A (2) (24 modues) (2) (24 modues) 400 A (2) (24 modues) (2) (24 modues) Ekinoxe 1: With 125 A power suppy modue Cat.No : With direct connection, power suppy via busbar at back of encosure 3: Without connection, power suppy via head of row device or side-mounted power suppy modue Cat.No XL³ 125 Pexo³ Encosures XL³ 160 XL³ 400 XL³ 800 XL³ 4000 (1/2 row) HX³/VX³ IS increased safety distribution system seection Mounting in XL³ 4000 encosures IS 223 IS 233 IS 333 VX³ IS coumn chassis (p. 48) Uprights, isoating supports, form 4b partitioning Tinned copper auminium busbars Fordepth725mm Fordepth975mm A A VX³ IS bases for devices (p. 48) DPX³ 160 DPX³ 160 with e..c.bs DPX³ 250 DPX³ 250 with e..c.bs DPX 630 3P P P P P P P P DPX 630 with with e..c.bs 3P P poe row distribution bocks (p ) HX³ 125 A IS (connection modues: see p. 46) HX³ 400 A IS (support bases: see p. 47)

38 VX 3 63and125Aautomaticterminas vertica distribution bocks -4-poe VX 3 63and125Aautomaticterminas vertica distribution bocks -4-poe n Technica characteristics Rated votage (Ue): 230/400 V± Rated frequency: 50/60 Hz Permissibe short-circuit current (Ipk): -VX 3 63 A automatic terminas: 20 kâ -VX A automatic terminas: 30 kâ Insuation votage (Ui): 500 V± Protection index: IP XXB Technica characteristics see opposite IP XXB 4-poe distribution bock with automatic output terminas For distribution using fexibe wires with or without ferrues Power suppy via the top or bottom, via screw terminas Suppied with banking pates for unused suppy terminas and fixing ugs for side-mounting in different encosures Connection/disconnection operations ony with power off Pack Cat.Nos VX 3 63Aautomaticterminasvertica distribution bocks For side-mounting in Pexo 3,XL and XL cabinets - Fixing ugs on rack for adjusting the vertica position Terminas capacity: - Incoming ines (power suppy): 6 to 16 mm 2 (fexibe)/25 mm 2 (rigid) - Outgoing ines: 4 to 10 mm 2 (fexibe) For cabinets with 3 rows Phase: 3 x 4 outgoing ines Neutra: 6 outgoing ines For cabinets with 4 rows Phase: 3 x 6 outgoing ines Neutra: 9 outgoing ines For cabinets with 5 rows Phase: 3 x 8 outgoing ines Neutra: 12 outgoing ines For cabinets with 6 rows Phase: 3 x 10 outgoing ines Neutra: 15 outgoing ines VX 3 125Aautomaticterminasvertica distribution bocks For side-mounting in XL and XL cabinets Terminas capacity: - Incoming ines (power suppy): 16 to 35 mm 2 (fexibe)/50 mm 2 (rigid) - Outgoing ines: 6 to 16 mm 2 (fexibe) For cabinets with 4 rows Phase: 3 x 6 outgoing ines Neutra: 9 outgoing ines For cabinets with 5 rows Phase: 3 x 8 outgoing ines Neutra: 12 outgoing ines For cabinets with 6 rows Phase: 3 x 10 outgoing ines Neutra: 15 outgoing ines n Dimensions VX 3 63 A VX A 65 B A B A A B

39 HX A automatic terminas horizonta distribution bocks - 4-poe HX A automatic terminas horizonta distribution bocks - 4-poe n Technica characteristics Rated votage (Ue): 230/400 V± Rated frequency: 50/60 Hz Permissibe short-circuit current (Ipk): 20 kâ Insuation votage (Ui): 500 V± Impuse votage Uimp: 6 kv - degree of poution 3 Rated current: 125 A Protection index: IP XXB Technica characteristics see opposite IP XXB 4-poe distribution bocks equipped with automatic terminas For distribution in rows using fexibe wires with or without ferrues or rigid wires Power suppy via the top, bottom or feedthrough via screw terminas Suppied with fixing ugs for mounting on 3 rais in Pexo 3 cabinets, XL 3 125, XL 3 160andXL encosures and brackets for wire management Can be fitted on a soid pate Pack Cat.Nos HX A automatic terminas horizonta distribution bocks Terminas capacity: - Incoming ines (power suppy): 10 to 35 mm 2 (rigid or fexibe) imited to 25 mm 2 with feedthrough power suppy - Outgoing ines: 0.5 to 6 mm For compete row For mounting in XL 3 160/400/800/4000 encosures Phase: 3 x 9 outgoing ines Neutra: 18 outgoing ines For 1/2 row For mounting in Pexo 3 cabinets and XL 3 125/160/400/800/4000 encosures Phase: 3 x 4 outgoing ines Neutra: 8 outgoing ines n Dimensions Cat.No Cat.No

40 HX 3 80/125Apug-insystem horizonta distribution bocks -4-poe HX 3 80/125Apug-insystem horizonta distribution bocks -4-poe n Technica characteristics Rated votage (Ue): 230/400 V± Rated frequency: 50/60 Hz Permissibe short-circuit current (Ipk): 25 kâ Insuation votage (Ui): 690 V± Maximum rated current: A when equipped with power suppy modue Cat.No A when suppied via head of row device Protection index: IP 20 Maximum connection cross-section for the power suppy modue: 50 mm Compatibe DX 3 moduar devices 1P+N RCBOs for protecting the outgoing ines 2P RCCBs for protecting the outgoing ines 4P RCCBs for protecting the outgoing ines 4P RCBOs for protecting the outgoing ines 2P RCBOs for protecting the outgoing ines 1P, 2P, 3P, 4P circuit breakers, 1 modue/poe (1) 1: Except for products dedicated to the HX 3 4-poe suppy busbar Connection modues /44/45/46 (L1, L2, L3, N) Technica characteristics see opposite Used for 3-phase distribution without wiring of DX/DX 3 moduar devices up to 125 A on a singe row Automatic connection and disconnection of equipment totay safey, thanks to the distribution bock's IP XXB insuation Protection devices can be added or removed even when HX 3 80/125 distribution bock is powered-up, thanks to the integra connection modues Power suppy modue and head of row device can be removed ony after cutting off the power of HX³ distribution bock Tota freedom to insta and combine devices: 1P+N, 2P, 3P, 4P, add-on modues modues, auxiiaries, contro devices, etc Seection of the phase to be connected by seecting the connection modue For mounting in XL 3 400/800/4000 encosures with 2-position auminium rai Cat.Nos and /51 and in XL encosures with the mounting accessory Cat.No Pack Cat.Nos HX 3 80/125 A pug-in system horizonta distribution bocks Distribution bocks Fixed directy onto rais Cat.Nos , and Maximum rated current: - 80 A when suppied via head of row device A when equipped with power suppy modue Cat.No modues modues 125 A power suppy modue Power suppy modue and protection cover Connection modues Used for automatic connection and disconnection of moduar devices on the HX 3 80/125 A pug-in distribution bock For1modueperpoedevices Pack of 10 connection modues L Pack of 10 connection modues L Pack of 10 connection modues L Pack of 10 connection modues N Accessory for mounting in XL encosure Used for mounting the 24 modues HX A pug-in distribution bock Cat.No in XL encosures n Instaation Direct power suppy via the power suppy modue (for protecting the outgoing ines) - maximum rated current 125 A D1 DX 3 C 4P 20A D2 DX 3 C 2P 32A D3 DX 3 C 4P 20A Indirect power suppy via head of row device - maximum rated current 80 A The distribution bock is protected by the head of group device and its rated current is imited by the atter's rating D1 DX 3 C 4P 40A D2 DX 3 C 1P 16A D3 DX 3 C 1P 16A D4 DX 3 C 1P 16A D1 DX 3 C 4P 20A D2 DX 3 C 1P 16A D3 DX 3 C 1P 16A 38

41 HX³ 400 A optimised distribution system horizonta mounting in XL 3 400, XL and XL encosures HX³ 400 A optimised distribution system horizonta mounting in XL 3 400, XL and XL encosures Pack Cat.Nos HX³ 250 A row distribution bock For mounting in XL encosures Take bases for DPX 3 and bases for DX 3 devices Capacity 24 modues With direct connection on VX 3 250/400 A busbars at back of encosure Without connections Side-mounting power suppy modue for distribution bock without connections for 250 and 400 A distribution bock HX³ 400 A row distribution bock For mounting in XL and XL encosures Take the support bases for DPX 3 and for moduar devices Capacity 24 modues With direct connection on VX A busbars at back of encosure Without connections Side-mounting power suppy modue for distribution bock without connections for 250 and 400 A distribution bock HX³ support bases for DPX³ MCCBs For automatic connection of DPX³ MCCBs on HX³ 250 A and 400 A row distribution bocks Suppiedwithterminashieds For DPX P Pwithorwithoute..c.bs For DPX³ P Pwithorwithoute..c.bs HX³ support bases for DX³ moduar devices ForautomaticconnectionofDX 3 devices on HX³250and400Arowdistributionbocks The bases are suppied via the distribution bock Pug-in bases for 1 modue per poe DX³ For 4-poe DX For 3-poe DX For singe poe DX 3 - Phase L For singe poe DX 3 - Phase L For singe poe DX 3 - Phase L For singe poe DX 3 - Neutra N Wired bases for 1.5 modue per poe DX³ For 4-poe DX For 3-poe DX For singe poe DX 3 - Neutra N For singe poe DX 3 - Phase L For singe poe DX 3 - Phase L For singe poe DX 3 - Phase L3 Wired bases for 1 modue per poe DX³ - In 63 A For 4-poe DX For 3-poe DX For singe poe DX 3 - Neutra N For singe poe DX 3 - Phase L ForsingepoeDX 3 - Phase L ForsingepoeDX 3 - Phase L3 Universa base Empty base, 1 modue without power suppy n Technica characteristics Rated votage (Ue): 230/400 V± Rated frequency: 50/60 Hz Permissibe short circuit current (Ipk): xx ka Insuation votage (Ui): 1000 V Rated current: 250/400 A maximum (centra power suppy) Protection index: IP 20 Maximum connection cross-section for the power suppy modue: fexibe bars 32 x 4 mm n Instaation Direct power suppy Via busbars at back of encosure n Dimensions Cat.Nos /81/83/84 Cat.Nos /01/02/03 Bases for DX³ "Pug-in" Cat.Nos A B / / B A Cat.Nos /83 Via busbars in cabe seeve 37.5 Cat.Nos A B C ,5 266, ,5 266,5 B Indirect power suppy Via head of row device C "Wired" 27 Cat.Nos404481/84 Cat.Nos /84 Cat.No Cat.No Cat.Nos /

42 VX A optimised distribution system vertica mounting in XL encosures HX 3 /VX 3 optimised distribution system vertica mounting in XL encosures n Mounting options Set of busbars at back of encosure DPX 3 160/250 DPX 630 Power suppy kit Cat.Nos /41 Power suppy kit Cat.No Pug-in HX³ 125 A row distribution bockcat.no C-section bars Cat.No supports Cat.No connection kit Cat.No Technica characteristics see opposite Pack Cat.Nos VX 3 250/400 A optimised distribution system of auminium busbars Compete kit Compete kit containing: 1 XL encosure height 1900 mm + 1 insuated backpate + 3 isoating supports + 1 ug support + 4 x 400 A busbars + 1 set of IP 2x isoating profies Tinned copper auminium C-section busbars Eectroytic compatibiity with copper guaranteed A - height 1600 mm A - height 1600 mm Mounting accessories for busbars at back of encosure For mounting in XL encosures The tinned copper auminium C-section busbars must be inserted in an insuated backpate and hed in pace by isoating supports Busbar fixing centres 43 mm Insuated backpate for encosure height 1900 mm Isoating support for auminium C-section busbar Isoating ug support for auminium C-section busbar Set of isoating profies for IP 2x busbar protection Mounting accessories for auminium busbars in cabe seeve For mounting in XL externa cabe seeve or in XL interna cabe seeve Isoating support for auminium C-section busbar Isoating ug support for auminium C-section busbar Accessories for 250 and 400 A auminium busbars IP 2X 250 A tap-off termina M8 hammer screws Prefabricated connection kits Rigid copper busbars for connecting devices on VX 3 250/400 A set of auminium busbars Suppied with screws For suppying a set of busbars at the back of the encosure Via a DPX with or without e..c.bs Via a DPX with or without e..c.bs Via a DPX 630 with or without e..c.bs Via a DPX-IS Via a DPX-IS 630 For suppying a set of busbars in a cabe seeve via a device in a cabe seeve Via a DPX with or without e..c.bs Via a DPX with or without e..c.bs Via a DPX 630 with or without e..c.bs For connecting a horizonta device in an encosure on a set of busbars in a cabe seeve Via a DPX with or without e..c.bs Via a DPX with or without e..c.bs For a DPX 630 with or without e..c.bs For connecting a HX row distribution bock on a set of busbars in a cabe seeve For one row distribution bock Cat.No equipped with side mounting power suppy modue Cat.No Set of busbars and main device in externa cabe seeve DPX 3 160/250 HX³ 250 A row distribution bock Cat.No DPX 3 160/250 Row distribution bocks suppied by side-mounted busbars must be equippedwithpowersuppymoduecat.nos404482/85 Set of busbars in externa cabe seeve and main device in encosure DPX 630 DPX³ 160/250 Power suppy kit Cat.Nos /53 Connection kit Cat.No /57 Connection kit Cat.No HX³ 250 A row distribution bock Cat.No with power suppy modue Cat.No Connection kit Cat.No HX³ row distribution bock Cat.No with power suppy modue Cat.No Connection kit Cat.No Connection kit Cat.Nos /57 Power suppy kit Cat.No DPX 630 Connection kit Cat.No

43 VX A optimised distribution system vertica mounting in XL and XL encosures HX 3 /VX 3 optimised distribution system vertica mounting in XL encosures n Mounting options Set of busbars at back of encosure DPX 630 DPX 1600 Power suppy kit Cat.No Power suppy kit Cat.No C-section bars Cat.No Supports Cat.No connection kit Cat.No Technica characteristics see opposite Pack Cat.Nos VX A optimised distribution system of auminium busbars Consisting of tinned copper auminium C-section busbars, hed in pace by isoating supports (to be ordered separatey) Tinned copper auminium C-section busbars Eectroytic compatibiity with copper guaranteed A - height 1600 mm Mounting accessories for busbars at back of encosure For mounting in XL and XL encosures Isoating support for 800 A C-section busbars Isoating ug support for 800 A C-section busbars Set of isoating profies for IP 2X busbar protection Mounting accessories for busbars in cabe seeve For mounting in XL externa cabe seeve Isoating support for 800 A C-section busbars Isoating ug support for 800 A C-section busbars Accessories for 800 A auminium busbars IP 2X 250 A tap-off termina M8 hammer screw Prefabricated connection kits Pre-prepared rigid copper busbars for connecting devices on VX A set of auminium busbars Suppiedwithscrews For suppying a set of busbars at the back of the encosure Via a DPX 630 with or without e..c.bs Via a DPX Via a DPX-IS Via a top or bottom horizonta set of auminium busbars in XL encosure depth 725 mm Via a top or bottom horizonta set of 1600 A copper busbars in XL encosure depth 725 mm Forsuppyingasetofbusbarsinacabeseeve via a device in a cabe seeve Via a DPX 630 with or without e..c.bs For connecting a horizonta device in an encosure on a set of busbars in a cabe seeve Via a DPX with or without e..c.bs Via a DPX with or without e..c.bs For a DPX 630 with or without e..c.bs ForaDPX1600 For connecting a HX row distribution bock on a set of busbars in a cabe seeve For one row distribution bock Cat.No equipped with side mounting power suppy modue Cat.No For suppying the main circuit breaker upstream For a DPX 1600 mounted horizontay in an encosure with interna cabe seeve for cabe entry Set of busbars and main device in externa cabe seeve DPX³ 160/250 Pug-in HX³ 125 A row distribution bock Cat.No HX³ 400 A row distribution bock Cat.No DPX 630 Power suppy kit Cat.No Connection kit Cat.No HX³ 400 A row distribution bock Cat.No404484withpowersuppy modue Connection kit Cat.Nos /74 Set of busbars in externa cabe seeve and main device in encosure DPX 630 Connection kit Cat.No HX³ 400 A row distribution bockcat.no with power suppy modue Cat.No Upstream connection kit Cat.No Connection kit Cat.No DPX³ 160/250 Connection kit Cat.Nos /74 DPX 1600 DPX 630 Connection kit Cat.No Connection kit Cat.No

44 VX 3 /HX A optimised distribution system in XL encosures Dimensions p. 45 For distances between the supports p. 45 Pack Cat.Nos VX to 1600 A isoating supports For tinned copper auminium C-section busbars Aigned busbars in encosure or interna cabe seeve A configurations possibe in XL encosures: - Vertica at the back of the encosure -Side-mountedverticabehindupright - Side-mounted vertica in interna cabe seeve - Horizonta top or bottom -Horizontatransfer Insuation votage Ui: 1000 V Impuse votage Uimp: 8 kv mm fixing centres for encosures depth 725 mm or 475 mm in partia chassis mm fixing centres for encosures depth 975 mm Additiona support with 75 mm fixing centres for encosure depth 725 mm mm fixing centres for encosures depth 975 mm The support can be doubed for a current of 3200 A Additiona support with 125 mm fixing centres for encosure depth 975 mm Staggered busbars in cabe seeve Side-mounted verticay in cabe seeve mm fixing centres for cabe seeves depth 725 mm and 475 mm mm fixing centres for cabe seeves depth 975 mm The support can be doubed (in externa cabe seeves ony) for a current of 3200 A Tinned copper auminium C-section busbars Eectroytic compatibiity with copper guaranteed Length 1780 mm I(A) Cross-section (mm 2 ) IP 30 IP Connectorswith6x250Aoutputs Fixed onto auminium C-section bars with M10 hammerscrewcat.no037359orfatcopperbars Output capacity: -4x6to35mm 2-2x6to25mm 2 Accessories M8 hammer screw M10 hammer screw Joining kit for support Cat.Nos and to create sets of busbars up to 3200 A IP 2X 250 A tap-off termina Pack Cat.Nos HX³ row distribution bock for 4 DPX³ 160 Fordirectsuppyofarowof4DPX³fromVX³630to 1600 A aigned busbars For busbars behind upright in encosures depth 725 or 975 mm For busbars in interna cabe seeve depth 475 mm For busbars in interna cabe seeve depth 725 or 975 mm Connection kits for VX 3 busbars For connecting vertica auminium C-section busbars onhorizontabusbars For sets of busbars with the same fixing centres Can be used to extend a set of busbars busbar per phase busbars per phase Forsetsofbusbarswithdifferentfixingcentres For connecting a vertica set of auminium busbars with 75 mm fixing centres on a horizonta set of copper busbars up to 4000 A with 125 mm fixing centres For vertica set of aigned busbars fixed behind functiona upright in encosure depth 725 mm For vertica set of aigned busbars fixed behind functiona upright in encosure depth 975 mm VX 3 prefabricated connection kits Pre-prepared fexibe copper busbars for connecting devices on VX to 1600 A set of aigned auminium busbars, 75 mm fixing centres Suppied with screws Kits for fixed circuit breakers without accessories - mounted on fixed pates For side-mounted set of busbars behind upright For mounting in encosure depth 725 or 975 mm For horizonta DPX For horizonta DPX For horizonta DPX For row distribution bock Cat.No For side-mounted set of busbars in interna cabe seeve depth 475 mm For horizonta DPX For horizonta DPX For horizonta DPX For row distribution bock Cat.No equipped with side mounting power suppy modue Cat.No For side-mounted set of busbars in interna cabe seeve depth 725 and 975 mm For horizonta DPX For horizonta DPX For horizonta DPX For row distribution bock Cat.No equipped with side mounting power suppy modue Cat.No

45 VX 3 /HX 3 optimised distribution in XL encosures n Mounting options VX A set of busbars at back of encosure XL depth 475 mm Power suppy via main device up to 800 A XL depth 725 mm Power suppy via horizonta set ofcopperbusbars,1or2bars perpoeupto1600a (75mmfixingcentres) XL depth 725 mm Power suppy via horizonta set of auminium busbars, 1barupto1600A (75 mm fixing centres) DPX 630/1600 Power suppy kit Cat.Nos /64 HX³ 125 A row distribution bock Cat.No Power suppy kit Cat.No HX³ 125 A row distribution bock Cat.No Power suppy kit Cat.No HX³ 125 A row distribution bock Cat.No HX³ 400 A row distribution bock Cat.No HX³ 400 A row distribution bock Cat.No HX³ 400 A row distribution bock Cat.No VX to 1600 A set of aigned busbars, 75 mm fixing centres, mounted side by side in encosure behind functiona upright XL depth 725 or 975 mm Power suppy via horizonta set of copper busbars, 1 or 2 bars per poe up to1600a(75mmfixingcentres) XL depth 725 or 975 mm Power suppy via horizonta set of copper busbars, 1 to 3 bars per poe up to4000a(125mmfixingcentres) Connection kit Cat.Nos /83 HX³ 400 A row distribution bock Cat.No with connection kit Cat.No Distribution bock for 4 DPX³ 160 Cat.No DPX³ 160 Connection kit Cat.No Connection kit Cat.No DPX³ 250 Connection kit Cat.No DPX 630 Connection kit -Cat.No404545(depth725mm) -Cat.No404546(depth975mm) HX³ 400 A row distribution bock Cat.No with connection kit Cat.No Distribution bock for 4 DPX³ 160 Cat.No DPX³ 160 ConnectionkitCat.No ConnectionkitCat.No DPX³ 250 ConnectionkitCat.No DPX 630 VX to 1600 A set of aigned busbars, 75 mm fixing centres, mounted side by side in interna cabe seeve XL depth 475 mm with partia chassis XL depth 725 or 975 mm Power suppy via horizonta set ofcopperbusbars,1or2bars per poe up to 1600 A (75 mm fixing centres) Connection kit Cat.Nos /83 HX³ 400 A row distribution bock Cat.No with power suppy modue Cat.No Connection kit Cat.No Distribution bock for 4 DPX³ 160 Cat.No DPX³ 160 Connection kit Cat.No Connection kit Cat.No DPX³ 250 Connection kit Cat.No DPX 630 Power suppy via horizonta set ofcopperbusbars,1or2bars per poe up to 1600 A (75 mm fixing centres) Connection kit Cat.No (depth 725 mm) Cat.No (depth 975 mm) Connection kit Cat.Nos /83 HX³ 400 A row distribution bock Cat.No with power suppy modue Cat.No Connection kit Cat.No Distribution bock for 4 DPX³ 160 Cat.No DPX³ 160 Connection kit Cat.No Connection kit Cat.No DPX³ 250 Connection kit Cat.No DPX 630 Power suppy via horizonta set of copper busbars, 1 to 3 bars per poe up to4000a (125 mm fixing centres) Partia chassis, depth

46 KitsderaccordementsVX³optimisées jusqu'à 4000 A - en armoires XL³ 4000 VX³kitsforoptimisedconnection inxl³4000encosures n Downstream connection of DMX³ on transfer busbar Pack Cat.Nos Connection kits for transfer Anged, dried copper bars for downstream connection of devices on horizonta auminium transfer busbars, fixing centres 75 mm The busbars can be instaed at the top or the bottom For size 2 DMX³ or 3200 A For mounting in XL³ 4000 encosures depth 725 mm and 975 mm For fixed version For inverter fixed version For draw-out version ForDMX³inverter,draw-outversion For size 1 DMX³ to 2000 A For mounting in XL³ 4000 encosures depth 725 mm and 975 mm For fixed version - 2 bars per poe 1600 to 2000 A For inverter fixed version - 2 bars per poe 1600 to 2000 A For draw-out version - 2 bars per poe 1600 to 2000 A For DMX³ inverter draw-out version 2 bars per poe 1600 to 2000 A For fixed version - 1 bar per poe up to 1600 A For inverter fixed version - 1 bar per poe up to 1600 A For draw-out version - 1 bar per poe up to 1600 A For DMX³ inverter draw-out version 1 bar per poe up to 1600 A For vertica DPX For fixed version with front terminas in XL³ 4000 depth475mm For fixed version with front terminas in XL³ 4000 depth 725 mm For draw-out version with front terminas in XL³ 4000 depth 725 mm For fixed version with rear terminas in XL³ 4000 depth 725 mm For draw-out version with rear terminas in XL³ 4000 depth 725 mm DMX³ connection kits for SCP connection interfaces Anged, dried bars for upstream connection of DMX³ on prefabricated busbar system entries For mounting in XL³ 4000 encosures depth 725 mm and 975 mm For 1600 A SCP entry, fixed version For 2000 A SCP entry, fixed version For 2500 A SCP entry, fixed version For 1600 A SCP entry, draw-out version For 2000 A SCP entry, draw-out version For 2500 A SCP entry, draw-out version SCP connection interfaces for XL³ encosures Eements used for connecting SCP Zucchini busbars to XL³ 4000 encosures To be used with the set of 2 roof reinforcement brackets Cat.No A A A A A A A A n Connection of DMX³ suppy inverters on transfer busbar n Vertica DPX 1600 connection on transfer busbar Front terminas Rear terminas 44

47 VX 3 optimised vertica distribution system n VX³ 400 A auminium busbars Insuation votage in accordance with EN /IEC : 1000 VA Impuse votage (Uimp): 8 kv Determining the maximum distances between the supports (mm) / /51 Insuated backpate Staggered in cabe seeve Bars Ipk (kâ) Dimensions (mm) Cat.Nos / n VX³ 800 A auminium busbars Insuation votage in accordance with EN /IEC : 1000 VA Impuse votage (Uimp): 8 kv Determining the maximum distances between the supports (mm) Dimensions (mm) Cat.Nos / / /71 Back of encosure Staggered in cabe seeve Bars Ipk Cat.Nos / n VX³ 630 to 1600 A auminium busbars Insuation votage in accordance with EN /IEC : 1000 VA Impuse votage (Uimp): 8 kv 400 Determining the maximum distances between the supports (mm) /66/ /68/69 Bars 1 C-section auminium bar per poe 1 C-section auminium bar per poe Ipk (kâ) Dimensions (mm) Cat.Nos /51/66/68 35 A A B C D A E F F E Ø6.5 Cat.Nos / A A A B C D E F F E Ø6.5 Cat.Nos A B C D E F

48 HX³/VX³ IS INCREASED SAFETY DISTRIBUTION SYSTEM HX IS increased safety distribution system upto125a-horizonta mounting in XL³ 4000 encosures IS 223, IS 233 IS The service index (IS) guarantees the eve of service of the pane for operation, maintenance and upgrade operations. With the VX³ IS IPxxB increased safety auminium busbar, Legrand is providing innovative soutions for eves 223, 233 and 333 IS 223: - Optimum upgrading The automatic connection bases enabe a device or a row distribution bock to be added without having to switch off the pane Technica characteristics p. 47 Pack Cat.Nos HX³ 125 A IS 223 row distribution bock Pug-in distribution bock For mounting on functiona uprights in XL³ 4000 Automatic connection and disconnection on the VX³ IS coumn chassis in accordance with IS Base with power suppy via camps, equipped with HX³ 125 A row distribution bock and pre-wired power suppy modue (can not be removed) Width: 24 modues Capacity: 20 modues Connection modues Used for automatic connection and disconnection of moduar devices on the 125 A row distribution bock For1modueperpoedevices Pack of 10 connection modues L Pack of 10 connection modues L Pack of 10 connection modues L Pack of 10 connection modues N IS 233: - Optimum upgrading - Optimum maintenance A device is repaced without doing anything to the connections IS 333: - Optimum upgrading - Optimum maintenance - Optimum operation A "test" position enabes a device to be disconnected whie keeping the auxiiaries connected 46

49 HX 3 -ISincreasedsafetydistributionsystem up to 400 A - horizonta mounting in XL³ 4000 encosures HX 3 -ISincreasedsafetydistribution system horizonta mounting n HX³ 125 A IS row distribution bock Technica characteristics see opposite Pack Cat.Nos HX A IS 223 row distribution bock For mounting on functiona uprights in XL Automatic connection and disconnection on the VX³ IS coumn chassis in accordance with IS 223 Takes the 4-poe bases for DPX 3 and the bases for moduar devices modue distribution bock with power suppy via camps HX³ support bases for DPX³ MCCBs For automatic connection of DPX³ MCCBs with or without e..c.bs on HX³ 400 A IS 223 row distribution bocks Suppiedwithterminashieds For DPX P Pwithorwithoute..c.bs For DPX³ P Pwithorwithoute..c.bs HX³ 125 A IS 223 row distribution bock Cat.No n HX³ 400 A IS row distribution bock HX³ support bases for DX³ moduar devices For automatic connection of DX 3 devices on HX³ 400AIS223rowdistributionbocks Thebasesaresuppiedviathedistributionbock Pug-in base for 1 modue per poe DX³ For 4-poe DX For 3-poe DX For singe poe DX 3 - Phase L For singe poe DX 3 - Phase L For singe poe DX 3 - Phase L For singe poe DX 3 - Neutra N Wired bases for 1.5 modue per poe DX³ For 4-poe DX For 3-poe DX For singe poe DX 3 - Neutra N For singe poe DX 3 - Phase L For singe poe DX 3 - Phase L For singe poe DX 3 - Phase L3 Wired bases for 1 modue per poe DX³ - In 63 A For 4-poe DX For 3-poe DX For singe poe DX 3 - Neutra N For singe poe DX 3 - Phase L For singe poe DX 3 - Phase L For singe poe DX 3 - Phase L3 Universa base Empty base, 1 modue without power suppy HX³ 400 A IS 233 row distribution bock Cat.No HX³ support base for DPX 3 Cat.Nos /03 47

50 VX IS increased safety distribution system up to 2000 A vertica mounting in XL³ 4000 encosures Pack Cat.Nos VX 3 IS xx3 coumn chassis Tinned copper auminium busbar Specia profie for automatic connection via camps Takes VX³ IS bases for devices and HX³ IS row distribution bocks For distribution conforming to IS 223, 233 and 333 according to the bases and distribution bocks instaed Suppied with partitions for form 4b FormountinginXL³4000encosures VX³ISchassis Depth of encosure Chassis consisting of an upright and (mm) isoatingsupportsforauminiumbars For XL encosure height 2200 mm Facepate support frames Fixed for 725 mm width encosure or 975 mm width encosure without interna wiring seeve Fixed for 975 mm width encosure with interna wiring seeve VX³ IS xx3 tinned copper auminium bars Front profie for automatic connection Rear C-section profie for power suppy Equipped with IP 2X isoating profies Height 1800 mm A A VX³ IS bases for devices For fixing on the functiona uprights Power suppy via camps Automatic connection and disconnection on the VX³ IS coumn chassis VX³ IS 223 bases Automatic upstream connection 3P 4P Downstream connection via front terminas For DPX with or without e..c.bs For DPX with or without e..c.bs For DPX 630 with or without e..c.bs VX³ IS 233 bases Automatic upstream connection Automatic downstream connection For DPX without e..c.bs For DPX without e..c.bs For DPX 630 without e..c.bs For DPX with e..c.bs For DPX with e..c.bs For DPX 630 with e..c.bs VX³ IS 333 bases Automatic upstream connection Automatic downstream connection Base for automatic connection modue for auxiiaries For DPX without e..c.bs For DPX without e..c.bs For DPX 630 without e..c.bs For DPX with e..c.bs For DPX with e..c.bs For DPX 630 with e..c.bs Pack Cat.Nos Equipment for IS increased safety distribution system Specia IS 223/233 facepates Facepates with hinges and ock For 3P/4P DPX 3 160/250 with no accessory Height 200 mm For 3P/4P DPX 630 with no accessory Height 300 mm For 3P/4P DPX 3 160/250 with rotary or motor-driven hande - Height 200 mm For 3P/4P DPX 630 with rotary or motor-driven hande - Height 300 mm Facepate for HX³ 400 A IS row distribution bock Height 300 mm Facepate for HX³ 125 A IS row distribution bock Height 200 mm SpeciaIS333facepates x Facepate for HX³ 400 A IS row distribution bock x Height 300 mm Facepate for HX³ 125 A IS row distribution bock Height 200 mm For 3P/4P DPX 3 160/250 with no accessory Height 200 mm For 3P/4P DPX 630 with no accessory Height 300 mm For 3P/4P DPX 3 160/250 with rotary or motor-driven hande - Height 200 mm For 3P/4P DPX 630 with rotary or motor-driven hande - Height 300 mm Mounting ugs for standard screw-mounting facepates (4 ugs) for IS 333 ony Universa bases (height 300 mm) IS IS IS 333 Connection kits on horizonta busbars Linking bars prepared for suppying the VX³ IS coumn chassis via the main top or bottom horizonta busbar Suppied with partitioning housing for the horizonta busbar For 4000 A copper busbars, In 1250 A (fixing centres 125 mm) For 4000 A copper busbars, In 2000 A (fixing centres 125 mm) For 1600 A auminium busbars, In 1250 A (fixing centres 75 mm) For 3200 A auminium busbars, In 2000 A (fixing centres 75 mm) Connection modue for auxiiaries for IS 223 and IS 233 bases (suppied with IS 333 bases) Partitioning for form Partitioning kit for horizonta busbars in interna wiring seeve Partitioning kit for horizonta busbars in externa wiring seeve IS 233/333 rear partitioning kit, height 200 mm IS233/333rearpartitioningkit,height300mm Partition,height300mm,forreserve 48

51 VX 3 -ISincreasedsafetydistributionsystem,verticamounting n Mounting n Dimensions (mm) Bases for DPX³ 160 Bases for DPX³ 250 Bases for DPX , ,

52 foow us on Head office and Internationa Department Limoges Cedex - France Te.: + 33 (0) Fax:+33(0) EXB Juy 2013