Tubing. Thermoplastic. Fluoropolymer. Polyethylene Nylon Parprene TPE Polypropylene Polyurethane Clear Vinyl PTFE FEP PFA PVDF

Transcription

1 Thermoplastic Polyethylene Nylon Parprene TP Polypropylene Polyurethane lear Vinyl luoropolymer PT P P PV luido View ontent

2 Table of ontents Thermoplastic Introduction Thermoplastic oiled ir Hose & Intro...-4 : -9 ompatibility hart Material Overview...-6 Polyethylene ractional Series / Metric Series / lame Resistant Series PR High ensity Series HP Nylon ractional Series N/N Metric Series N/N Pure ir Series PT Semi-rigid Series NR Series NTN Parprene eneral Industrial Series : ood & airy Series : Polypropylene Laboratory rade Series PP/PP Polyurethane ractional Polyether ase Series U Metric Polyether ase Series UM HUR MicroWeld Series HUR ractional Series HU Metric Series HUM lear Vinyl & ccessories lear Vinyl Series PV eneral Technical -2 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

3 luoropolymer Introduction Intro Material Overview luoropolymer Nomenclature PT ractional Series Metric Series ractional Series TS, TT, TL W Series TH, TS, TT, TL eading - Series T Spiral ut able Wrap, TSWT PT ractional Heat Shrink - Series HS2TS, HS2TT, HS2TL, HS2TI PT W 2:1 Heat Shrink - Series HS2TS, HS2TT, HS2TL PT W 4:1 Heat Shrink - Series HS4TI onvoluted, onvo-tex - Series V Low Profie, Heavy - Series VL, VH S S81914/1 and 2 - Series P ractional Series Metric Series P 1.3:1 Heat Shrink - Series HS1.3P P 1.67:1 Heat Shrink - Series HS1.67P P Roll over - Series HS1.25P P/PT ouble Shrink - Series TSSS, TSSL onvoluted- Series V03, onvo-lon S S81914/3 and 4 - Series orrugated - Series R Retractable oiled - Series Thermoplastic oiled ir Hose & P ractional Series Metric Series High Purity P ractional Series Metric Series & ccessories PV lex Series Super-lex Series or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -3 eneral Technical

4 Hose Parflex Introduction Thermoplastic oiled ir Hose & Parflex New, Product Parflex has expanded the tubing line to include: Parprene TP, a thermoplastic elastomer formulated to withstand the rigors of peristaltic pump applications and yet, be safe enough for food and beverage applications. pgs. -28 : -31 P Roll over, a protective sleeve for rollers used with ink or in paper mills. pg. -88 ouble Shrink Heat Shrink protects cables and other objects by totally encapsulating the parts as the P melts during the PT shrinking process. pg. -89 onvoluted tubing for applications where flexibility is needed. vailable in PT, P and P materials. pgs. -76 : -80, -90 : -92 orrugated tubing is the most flexible tubing available and is capable of turning sharp corners without reducing the inside diameter of the tube. vailable in P and P. pg. -94 luoroplastic coiled tubing is a spiral formed tube, consisting of a single or double retractable coil in a single tube. vailable in P and P. pg. -96 Parflex Tutorial & ccessories Review the general attributes of Parflex thermoplastic and fluoropolymer tubing this provides an excellent overview for the tubing product line. Review the application symbols - this will help you clear up any questions you may have on the product tables within the section. The market/applications table identifies and provides a good fit summary. Review the pressure bar graph - provides relative pressure ratings for the entire line of thermoplastic tubing. or fluoropolymer tubing, please contact ustomer Service. Review the STMP guide (Size, Temperature, Media, pplication, Pressure, nd onfiguration, and elivery Preferences) on pg. 11 to help narrow your search for the desired product. Specific nomenclature, features, advantages and benefits can be found at the beginning page of each product line. Text appears in 2 colors. The primary dimensions are in black. s a courtesy, the metric/inch equivalent has been added and appears in blue. eneral Technical -4 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

5 Introduction Hose Tube Line abrication uide for Leak ree Systems very hydraulic, pneumatic and lubrication system requires some form of tube line fabrication and fitting installation for completion. Proper fabrication and installation are essential for the overall efficiency, leak free performance and general appearance of any system. Start by planning ahead. fter sizing the tube lines and selecting the appropriate style of fitting, consider the following in the design of your system: ccessibility of joints Proper routing of lines dequate tube line supports vailable fabricating tools Routing of Lines Routing of lines is probably the most difficult, yet most significant, of these system design considerations. Proper routing involves getting a connecting line from one point to another through the most logical path. lways try to leave fitting joints as accessible as possible. Hard to reach joints are hard to assemble and tighten properly. Inaccessible joints are also more difficult and time consuming to service. pplications/markets Thermoplastic oiled ir Hose & luid Handling onstruction Industrial Pneumatic lectrical Military eneral Industrial ompressed as Medical & ccessories Semiconductor ood & everage Pharmaceutical or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -5 eneral Technical

6 Parflex Introduction Thermoplastic oiled ir Hose & & ccessories ompatibility hart Parker / Hose apability with Parker S ompression & lare Push-to-onnect arb OT Product Sizes (inch) ompression - Inch (2,3,4,5,6,7,8,10,12,14) Polyethylene & Inch (4,5,6,8,10) Metric (6,8,10,12) PS TS Polyethylene P Inch (2,2.5,3,4,5,6,8) Parflex Thermoplastic Industrial Series (Outside iameter Shown) Polyethylene PR Inch (2.5,4,6,8) Polyethylene HP Inch (4,6) Nylon N Inch (2,2.5,3,4,5,6,8) Metric (4mm - 20mm) Nylon PT Inch (2,4,6,8,10,12) Nylon NR Inch (2,3,4,5,6,8) ompress-lign - Inch (2,3,4,5,6,8,10,12,14,16) TS TS TS TS TS TS TS TS Metru-Lok - Metric (4,6,8,10,12,14,16,18,22) TS TS Poly-Tite - Inch (2,3,4,5,6,8) S S Hi-uty - Inch (2,3,4,5,6,8,10) TS TS TS TS TS TS TS TS 45 degree flare - Inch (2,3,4,5,6,8,10,12,14) Inverted lare - Inch (2,3,4,5,6,8,10,12,14) PS TS PS TS PS TS PS TS PS TS PS TS Polypropylene PP & PP Inch (2,3,4,5,6,8,10) PS TS Polyurethane U (90-95 Shore ) Inch (2,3,4,6,8,9,12) Metric (4,6,8,10,12) Industrial Series (O.. shown) ast & Tite - Inch (4,5,6,8,10) TS TS TS low ontrols - Inch (2,2.5,4,5,6,8) Metric (4,6,8,10,12) Prestolok rass - Inch (2,2.5,3,4,5,6,8) Metric (4,5,6,8,10,12,14) Prestolok omposite Inch (2,2.5,3,4,5,6,8) Metric (4,5,6,8,10,12,14) Liquifit - Inch (4,6,8) TrueSeal - Inch (4,5,6,8) TS TS TS Par-arb - Inch (2,3,4,5,6,8,10,12) L L ubl-arb - Inch (2.5,4,6,8) Hose arb - Inch (2,3,4,5,6,8,10,12,16) Inside iameter arden Hose NT - Inch (3,4,6,8,10,12) Transmission - Inch (2,2.5) ir rake - Inch (4,6,8,10,12,16) ir rake Hose - Inch (6,8) Vibra-Lok - Inch (2,3,4,5,6,8,10,12) Prestomatic - Inch (2,2.5,3,4,6,8,10,12) Metric (6,8,10,12,16) PT - Inch (4,6,8,10,12) S artridges - Inch (2.5,4,6,8,10,12) Manifolds - Inch (4,6,8) Polyurethane HU & HUM (>95 Shore ) Inch (2,2.5,4,6,8,12) Metric (4,6,8,10,12) Polyurethane R (Weld ) Inch (4,5,6,8) lear Vinyl Inch (1/8-2 1/2 ) L L eneral Technical PS = Plastic sleeve & tube support recommended TS = Tube support is recommended S = rass sleeve recommended L = lamp required -6 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

7 PT ir rake (S J844) Inch (2,2.5,3,4,5,6,8,10,12) Parflex Thermoplastic ir rake IN (Nylon 12) Metric (4,6,8,10,12,15,16,18) PT iesel uel Sizes 4,6,8,10,12 HTL iesel uel Sizes 4,6,8,10,12 P luoropolymer Inch (3/32-1 ) Metric (4mm - 12mm) PS TS Parflex luoropolymer P luoropolymer Inch (1/8-1 ) Metric (3mm - 12mm) PS TS PT luoropolymer Inch (3/ ) Metric (3mm - 16mm) PS TS PV luoropolymer Inch (2,3,4,5,6,8,10,12,16 Tube Line abrication uide for Leak ree Systems very hydraulic, pneumatic and lubrication system requires some form of tube line fabrication and fitting installation for completion. Proper fabrication and installation are essential for the overall efficiency, leak free performance, and general appearance of any system. Start by planning ahead. fter sizing the tube lines and selecting the appropriate style of fitting, consider the following in the design of your system: Product Sizes (inch) ompression - Inch (2,3,4,5,6,7,8,10,12,14) TS TS TS ompress-lign - Inch (2,3,4,5,6,8,10,12,14,16) Metru-Lok - Metric (4,6,8,10,12,14,16,18,22) Poly-Tite - Inch (2,3,4,5,6,8) Hi-uty - Inch (2,3,4,5,6,8,10) 45 degree flare - Inch (2,3,4,5,6,8,10,12,14) Inverted lare - Inch (2,3,4,5,6,8,10,12,14) ast & Tite - Inch (4,5,6,8,10) low ontrols - Inch (2,2.5,4,5,6,8) Metric (4,6,8,10,12) Prestolok rass - Inch (2,2.5,3,4,5,6,8) Metric (4,5,6,8,10,12,14) Prestolok omposite Inch (2,2.5,3,4,5,6,8) Metric (4,5,6,8,10,12,14) Liquifit - Inch (4,6,8) TrueSeal - Inch (4,5,6,8) Par-arb - Inch (2,3,4,5,6,8,10,12) ubl-arb - Inch (2.5,4,6,8) Hose arb - Inch (2,3,4,5,6,8,10,12,16) Inside iameter arden Hose NT - Inch (3,4,6,8,10,12) Transmission - Inch (2,2.5) ir rake - Inch (4,6,8,10,12,16) ir rake Hose - Inch (6,8) Vibra-Lok - Inch (2,3,4,5,6,8,10,12) Prestomatic - Inch (2,2.5,3,4,6,8,10,12) Metric (6,8,10,12,16) PT - Inch (4,6,8,10,12) S artridges - Inch (2.5,4,6,8,10,12) Manifolds - Inch (4,6,8) ompression & lare Push-to-onnect arb OT 1. ccessibility of joints 2. Proper routing of lines 3. dequate tube line supports 4. vailable fabricating tools Thermoplastic oiled ir Hose & & ccessories PS = Plastic sleeve & tube support recommended TS = Tube support is recommended S = rass sleeve recommended L = lamp required or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -7 eneral Technical

8 Thermoplastic Thermoplastic oiled ir Hose & Polyethylene Parflex polyethylene tubing meets, NS Standard 51 for all food contact applications and NS-61 for potable water applications. -Series tubing is made of 100% virgin resin material. Polyethylene tubing meets STM (10% IPL) for stress crack resistance. Parflex also offers special P tubing: PR (flame retardant) and HP (high density). Nylon lexible nylon tubing is constructed of high-grade resins for strength and flexibility for routing in tight spaces. Semi-rigid high strength nylon is constructed of high-grade resins without the addition of plasticizers for higher pressure tubing applications. Pure ir (PT) is the tubing choice for pure air systems (semiconductor) due to its cleanliness; in addition, it offers excellent chemical and UV light resistance. NTN meets NS Standard 51 for all food contact applications and may be used for instrumentation lines, lubrication and process piping systems and oil and refrigerant lines. & ccessories Parprene (thermoplastic elastomer) xcellent flexural fatigue resistance. Resistant to environmental stress cracking. Series meets, NS Standard 51 and 3- approved for all food contact applications. Polypropylene Polypropylene tubing meets, NS Standard 51 for all food contact applications. Polypropylene tubing exhibits excellent chemical resistance to chlorinated water applications. lack Polypropylene tubing is commonly used in outdoor applications where UV light stabilization is required. Polyurethane Polyurethane tubing is a flexible, kink-resistant and abrasion-resistant material commonly used in pneumatic applications. Polyurethane is available in multiple transparent and opaque colors for system color coding. Polyurethane is available in the following durometers (measurement of material hardness): Medium durometer: (90 95) High durometer: (>95) for higher pressures Polyvinyl hloride (PV) PV tubing is made from 100% virgin resin material and meets all specifications for materials in contact with food and drugs. PV tubing is a very flexible, 70 durometer tubing. It is crystal-clear and ideal for situations where visible fluid flow is necessary (i.e. sight gauges for tank identification). eneral Technical ll plastic tubing dimensions are laser monitored to ensure overall quality product. Most tubing sizes are packaged in convenient 100-ft., 250-ft., 500-ft. and 1,000-ft. lengths. -8 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

9 Thermoplastic Hose Typical pplications Product amily Series Suggested Markets and pplications and Potable water, chemical transfer, and low-cost, low-pressure pneumatics, NS-51 & NS- 61 Polyethylene PR Pneumatic controls in HV HP hemical transfer and low-cost pneumatics N Pneumatic and petroleum-based chemical transfer PT Pure air and gas distribution systems, semiconductor Nylon NR High pressure pneumatic, low pressure lubrication and hydraulic, marine control systems NTN Instrumentation lines, lubrication and process piping systems, oil and refrigerant lines, NS-51 Polypropylene PP and PP ood contact and chemical transfer applications, chlorinated water, NS-51 U and UM Pneumatic controls requiring high flexibility, kink resistance and movement Urethane HU and HUM High-pressure pneumatics requiring flexibility and kink resistance, robotics TP, Series Thermoplastic elastomer, black, general industrial tubing Parprene TP, Series Thermoplastic elastomer, tan, food & dairy compliant tubing Vinyl PV Low-pressure chemical and medical applications requiring high clarity and flexibility, Pressure Ranges Thermoplastic oiled ir Hose & Maximum Pressure (psi) P (104,/105) P (103) Nylon Semirigid (NR) Nylon lexible (N) PT (101) Nylon Semirigid(NT) Polypropylene (PP/PP) Nylon Pure ir (PT) PV (110/111) Polyurethane High urometer (HU) Polyethylene High ensity (HP) Polyethylene lame Resistant (PR) Polyurethane High urometer (HUM) Working pressures are at 73 (23 ). Pressure ratings are also effected by diameter of tubing and wall thickness. ctual performance may vary with different media and working conditions. Use this information for comparison only. or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd MicroWeld (HUR) Polyethylene ( / ) Polyurethane Metric (UM) Polyurethane (U) Polyethylene Metric ( / ) Vinyl (PV) TP -9 & ccessories eneral Technical

10 Thermoplastic Polyethylene Series : Instrument rade, NS Listed Series : Ultraviolet Light Resistant eatures Made from 100% virgin resin material hemically resistant and flexible High molecular weight resin provides increased dimensional stability, uniformity and long-term strength conomical system solution oiled ir Hose & pplications/markets Potable water hemical transfer Low-pressure pneumatics ertifications compliant for food contact STM (10% IPL) for stress crack resistance NS 51 NS 61 Tube O.. Tube I.. verage Thickness Working Pressure at 73 /23 Minimum urst at 73 /23 Package Quantity Package quantities vary by size and color Minimum end Radius lbs Weight Natural lack inch mm inch mm inch mm psi bar psi bar feet inch mm lbs./ft. kg./mtr. -43-XXXX -43-XXXX 1/ , 0500, XXXX -53-XXXX 5/ , XXXX -64-XXXX 3/ , XXXX -86-XXXX 1/ , XXXX -108-XXXX 5/ Standard black is not NS approved. & ccessories eneral Technical -10 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

11 Order Information xample: -64-Y Y-0500 Polyethylene -64-Y-0500 Tube O.. in sixteenths of an inch (3/8") -64-Y-0500 Tube I.. in sixteenths of an inch (.250") -64-Y-0500 olor, i.e. Yellow (Omit for Natural and lack) Natural Polyethylene lack Polyethylene -64-Y-0500 Package Quantity in feet (500') vailable in black as well as nine other colors, as recommended by the Instrument Society of merica Polyethylene (Series ) Maximum Working Pressure (psig) psi olor ode - Natural - lack lue reen O Orange P Purple R Red R ray Y Yellow WHT White Temperature (deg. ) or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd Parker fittings available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: ompression ompress-lign Poly-Tite Hi-uty ast & Tite low ontrol Prestolok rass Prestolok omposite Liquifit TrueSeal ubl-arb Prestomatic S artridge tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur. Reference /itting ompatibility hart (pg. -6) Notes, NS-51 and NS-61 compliant black polyethylene tubing is also available. dd -NS suffix to the part number (ie NS) series natural and colored tubing meet, NS-51 requirements for food contact applications and NS-61 for potable water Resistant to environmental stress cracking exceeding that of ordinary polyethylene tubing as measured by STM (10% IPL) lack () tubing contains an ultraviolet inhibitor which is recommended for use in sunlit areas and in close proximity to high ultraviolet light sources ll tubing conforms to STM -1248, Type I, lass, ategory 4, rade 5 The recommended operating temperature range for service at rated pressures with compatible fluids is -80 to +150 (-62 to +66 ) olors See olor ode Table -11 Thermoplastic oiled ir Hose & & ccessories eneral Technical

12 Thermoplastic Metric Polyethylene Series : Instrument rade, NS Listed Series : Ultraviolet Light Resistant eatures Made from 100% virgin resin material hemically resistant and flexible High molecular weight resin provides increased dimensional stability, uniformity and long-term strength conomical system solution oiled ir Hose & pplications/markets Potable water hemical transfer Low-pressure pneumatics ertifications compliant for food contact STM (10% IPL) for stress crack resistance NS 51 NS 61 Tube O.. Tube I.. verage Thickness Working Pressure at 73 /23 Minimum urst at 73 /23 Package Quantity Minimum end Radius Weight lbs Natural lack mm inch mm inch mm inch bar psi bar psi feet mm inch kg./mtr. lbs./ft. -6X X X X X X X X Standard black is not NS approved. & ccessories eneral Technical -12 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

13 Order Information xample: -8x x Metric Polyethylene (Natural) -8x Metric Polyethylene (lack) -8x Tube O.. in millimeters (8 mm) -8x Tube Thickness in millimeters (1 mm) -8x Package Quantity in feet (100') Metric Polyethylene (Series ) Maximum Working Pressure (bar) bar Temperature (deg. ) itting Recommendations Parker fittings available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: Metru-Lok low ontrol Prestolok rass Prestolok omposite Prestomatic tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur. Reference /itting ompatibility hart (pg. -6) Notes series natural and colored tubing listed below meet, NS-51 requirements for food contact applications and NS-61 for potable water Resistant to environmental stress cracking exceeding that of ordinary polyethylene tubing as measured by STM (10% IPL) lack () tubing contains an ultraviolet inhibitor which is recommended for use in sunlit areas and in close proximity to high ultraviolet light sources ll tubing conforms to STM -1248, Type I, lass, ategory 4, rade 5 The recommended operating temperature range for service at rated pressures with compatible fluids is -80 to +150 (-62 to +66 ) Thermoplastic oiled ir Hose & olors Natural lack & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -13 eneral Technical

14 Polyethylene Series PR: lame Resistant Thermoplastic eatures xcellent stress crack resistance ertifications UL 94 V-2 STM (10% IPL) for stress crack resistance oiled ir Hose & pplications/markets Pneumatic controls in HV applications Tube O.. Tube I.. verage Thickness Working Pressure at 73 /23 Minimum urst at 73 /23 Package Quantity Minimum end Radius Weight lack inch mm inch mm inch mm psi bar psi bar feet inch mm lbs./ft. kg./mtr. PR-2.5-XXXX 5/ lbs PR-4-XXXX 1/ , PR-6-XXXX 3/ PR-8-XXXX 1/ & ccessories eneral Technical -14 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

15 Order Information xample: PR PR lame Resistant Polyethylene PR Tube O.. in sixteenths of an inch (1/4") PR Package Quantity in feet (500') lame Resistant Polyethylene (Series PR) Maximum Working Pressure (psig) psi Temperature (deg. ) PR-2.5 PR-4 PR-6 PR-8 PR-9 Parker fittings available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: ompression ompress-lign Hi-uty ast & Tite low ontrol Prestolok rass ubl-arb tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur. Reference /itting ompatibility hart (pg. -6) Notes Using the same base linear low-density polyethylene (LLP) as the -Series tubing, Parker Hannifin, Parflex ivision s PR tubing has the following advantages: Resistant to environmental stress cracking exceeding that of ordinary polyethylene tubing as measured by STM (10% IPL) The recommended operating temperature range for service at rated pressures with compatible fluids is -85 to +150 (-65 to +66 ) olors lack Thermoplastic oiled ir Hose & & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -15 eneral Technical

16 Polyethylene Series HP: High ensity Thermoplastic eatures Manufactured from high strength, high density polyethylene Semi-rigid tubing that is inherently resistant to most chemicals, less easily cut or damaged and has a higher burst pressure rating than Series tubing conomical system solution oiled ir Hose & pplications/markets Potable water hemical transfer Low-pressure pneumatics Tube O.. Tube I.. verage Thickness Working Pressure at 73 /23 Minimum urst at 73 /23 Package Quantity Minimum end Radius Weight lbs lack inch mm inch mm inch mm psi bar psi bar feet inch mm lbs./ft. kg./mtr. HP-43-XXXX 1/ , HP-64-XXXX 3/ , Only available in black. & ccessories eneral Technical -16 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

17 Order Information xample: HP HP High ensity Polyethylene HP Tube O.. in sixteenths of an inch (1/4") HP Tube I.. in sixteenths of an inch (.170") HP Package Quantity in feet (500') High ensity Polyethylene (Series HP) Maximum Working Pressure (psig) psi Temperature (deg. ) HP (ll Sizes) Parker fittings available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: ompression ompress-lign ubl-arb Hi-uty ast & Tite Prestolok rass tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur. Reference /itting ompatibility hart (pg. -6) Notes Recommended operating temperature range for service at rated pressures with compatible fluids is -80 to +175 (-62 to +80 ) olors lack Thermoplastic oiled ir Hose & & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -17 eneral Technical

18 Nylon Series N: lexible Thermoplastic eatures lexible nylon tubing uses high-grade resins for strength and flexibility for routing in tight spaces Made from abrasion-resistant, heat and light-stabilized nylon xhibits low-level water absorption hemically resistant oiled ir Hose & pplications/markets Robotics Machine tool eneral pneumatics Lubrication Petroleum-based chemical transfer Pest control lines Tube O.. Tube I.. verage Thickness Working Pressure at 73 /23 Minimum urst at 73 /23 Reel Length Minimum end Radius Weight lbs Natural lack inch mm inch mm inch mm psi bar psi bar feet inch mm lbs./ft. kg./mtr. NN N / , NN N / , NN N / , NN N / , NN N / , NN N / , NN N / , & ccessories NN N / , NN N / , NN N / , NN N / , NN N / , NN N / , eneral Technical -18 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

19 Order Information xample: N R-0100 N R-0100 Nylon N R-0100 Tube O.. in sixteenths of an inch (1/8") N R-0100 Thickness in inches (.016") N R-0100 olors (Omit for Natural and lack) NN Natural Nylon N lack Nylon N R-0100 Package Quantity in feet (100') (Omit quantity number after color for 250' reel length) olor ode NN N LU RN R YL Nylon (Series N) Natural lack lue reen Red Yellow Maximum Working Pressure (psig) psi Temperature (deg. ) N N N N N N N N N N N N N N N N N N N Parker fittings available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: ompression ompress-lign Poly-Tite Hi-uty ast & Tite low ontrol Prestolok rass Prestolok omposite TrueSeal NT Transmission Prestomatic S artridge tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur. Reference /itting ompatibility hart (pg. -6) Notes The recommended operating temperature range for service at rated pressures with compatible fluids, depending upon conditions, is -65 to +200 ( -54 to +93 ) lack tubing suggested for use in sunlit areas and in close proximity to high ultraviolet light sources olors See olor ode Table Thermoplastic oiled ir Hose & & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -19 eneral Technical

20 Metric Nylon Series N: lexible Thermoplastic eatures lexible nylon tubing uses high-grade resins for strength and flexibility for routing in tight spaces Made from abrasion-resistant, heat and light-stabilized nylon xhibits low-level water absorption hemically resistant oiled ir Hose & pplications/markets Robotics Machine tool eneral pneumatics Lubrication Petroleum-based chemical transfer Pest control lines Tube O.. Tube I.. verage Thickness Working Pressure at 73 /23 Minimum urst at 73 /23 Reel Length Minimum end Radius Weight lbs Natural lack mm inch mm inch mm inch bar psi bar psi feet mm inch kg./mtr. lbs./ft. NN4X.65 N4X NN6X1 N6X NN8X1 N8X NN10X1 N10X NN12X1 N12X NN14X1.5 N14X NN16X1.5 N16X & ccessories NN18X1.5 N18X NN20X1.5 N20X eneral Technical -20 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

21 Order Information xample: NN4x.65 NN4x.65 Natural Nylon NN4x.65 Tube O.. in millimeters (4mm) NN4x.65 Thickness in millimeters (0.65mm) Parker fittings available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: Metru-Lok low ontrol Prestolok rass Prestolok omposite Prestomatic tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur. Reference /itting ompatibility hart (pg. -6) Thermoplastic oiled ir Hose & Metric Nylon (Series N) Maximum Working Pressure (bar) bar Notes The recommended operating temperature range for service at rated pressures with compatible fluids, depending upon conditions, is -54 to +93 (-65 to +200 ) lack tubing suggested for use in sunlit areas and in close proximity to high ultraviolet light sources olors Natural lack Temperature (deg. ) N4 N6 N8 N10 N12 N14 N16 N18 N20 & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -21 eneral Technical

22 Nylon Pure ir Series PT: Ultra Pure, UV Resistant Thermoplastic oiled ir Hose & pplications/markets Pure air and gas distribution systems Semi-conductor eatures The tubing choice for pure air systems (semiconductor) due to its cleanliness and excellent chemical and UV light resistance Maintains good resistance to high ambient temperatures with low moisture absorption Manufactured from a specially formulated nylon for use in pure air and gas distribution systems Provides high tensile strength with excellent coupling retention in high pressure, temperature and vibration environments Sizes -2 and -4 are single wall tubing construction Sizes -6 through -12 are reinforced tubing construction Tube O.. Tube I.. verage Thickness Working Pressure at 73 /23 Minimum urst at 73 /23 Reel Length Minimum end Radius Weight lbs inch mm inch mm inch mm psi bar psi bar feet inch mm lbs./ft. kg./mtr. PT2 1/ PT4 1/ PT6 3/ PT8 1/ PT10 5/ PT12 3/ & ccessories eneral Technical -22 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

23 Order Information xample: PT4-LK-0250 PT4-LK-0250 Pure ir PT4-LK-0250 Tube O.. in sixteenths of an inch (1/4") PT4-LK-0250 olor (lack) PT4-LK-0250 Package Quantity in feet (250') Pure ir Nylon (Series PT) Maximum Working Pressure (psig) olor ode LK lack RN rown SIL Silver Parker fittings available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: ompression ompress-lign Hi-uty ast & Tite NT tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur. Reference /itting ompatibility hart (pg. -6) Notes Packaged on corrugated plastic reel with ends capped and shipped in a plastic-lined container The suggested operating temperature range for service at rated pressures with compatible fluids is -70 to +200 (-57 to +93 ) PT tubing is rated for full vacuum service at 28 inch Hg Thermoplastic oiled ir Hose & olors See olor ode Table psi Temperature (deg. ) PT2 PT4 PT6 PT8 PT10 PT12 & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -23 eneral Technical

24 Thermoplastic Nylon Series NR: Semi-rigid High Strength eatures High grade nylon resins without the addition of plasticizers for higher pressure tubing applications etter chemical resistance than Series N, good resistance to high ambient temperature and low moisture absorption High tensile strength and excellent coupling reten tion in high pressure, temperature and vibration environments oiled ir Hose & pplications/markets High-pressure pneumatics and oils Lubrication systems Marine control systems Process lines for chemicals Tube O.. Tube I.. verage Thickness Working Pressure at 73 /23 Minimum urst at 73 /23 Reel Length Minimum end Radius Weight lbs Natural lack inch mm inch mm inch mm psi bar psi bar feet inch mm lbs./ft. kg./mtr. NNR NR / , NNR NR / , NNR NR / , NNR NR / , NNR NR / , NNR NR / , NNR NR / , & ccessories NNR NR / , NNR NR / , NNR NR / , NNR NR / , eneral Technical -24 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

25 Order Information xample: NR NR Nylon NR olor (lack) NR Rigid NR Tube O.. in sixteenths of an inch (1/8") NR Thickness in inches (.017") NR Package Quantity in feet (100') (Omit for other package quantities) Semi-rigid Nylon (Series NR) Maximum Working Pressure (psig) Parker fittings available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: ompression ompress-lign Hi-uty ast & Tite low ontrol Prestolok rass Prestolok omposite TrueSeal tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur. Reference /itting ompatibility hart (pg. -6) Hose Thermoplastic oiled ir Hose & psig psi Notes Suggested operating temperature range for service at rated pressures with compatible fluids is -60 to +200 (-51 to +93 ) olors Natural lack Temperature (deg. ) Temperature (deg. ) NR NR NR-2-026,NR NR NR-8-75 NR-4-050, NR & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -25 eneral Technical

26 Nylon Series NTN: Semi-rigid Nylon Thermoplastic eatures High grade nylon resins without the addition of plasticizers High tensile strength and excellent coupling reten tion in high pressure, temperature and vibration environments xcellent chemical resistance Rugged construction resists vermin attack oiled ir Hose & pplications/markets Instrumentation lines Lubrication systems Process piping systems Refrigerant lines ertifications NS-51 Tube O.. Tube I.. verage Thickness Working Pressure at 73 /23 Minimum urst at 73 /23 Reel Length Minimum end Radius Weight lbs inch mm inch mm inch mm psi bar psi bar feet inch mm lbs./ft. kg./mtr. 22NTN 1/ , NTN 5/ , NTN 3/ , NTN 1/ , NTN 5/ , NTN 3/ , NTN 1/ , & ccessories eneral Technical -26 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

27 Order Information xample: 44NTN 44NTN Tube O.. in sixteenths of an inch (1/4") 44NTN Nylon 44NTN olor (Natural) Semi-rigid Nylon (Series NTN) Maximum Working Pressure (psig) psi Temperature (deg. ) NTN (ll Sizes) Parker fittings available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: ompression ompress-lign Poly-Tite Hi-uty ast & Tite low ontrol NT Prestolok rass Prestolok omposite Prestomatic S artridges Transmission TrueSeal tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur. Reference /itting ompatibility hart (pg. -6) Notes Suggested operating temperature range from 60 to +212 (-51 to +100 ) olors Natural Thermoplastic oiled ir Hose & & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -27 eneral Technical

28 TP Parprene Series : eneral Industrial Thermoplastic eatures xcellent flexural fatigue resistance Ozone and UV light resistant Temperatures from (-75 to 275 ) brasion resistant Resistant to environmental stress cracking Lot-to-lot traceability hemically compatible with common sanitizers and cleaners xtensive range of compatible Parker fittings and couplers oiled ir Hose & pplications/markets Wastewater Sampling able Insulation austic ispensing Ink and toner feed lines hemical Transfer Tube O.. (Ref.) Tube I.. Thickness Maximum Working Pressure Minimum end Radius Standard oil Weight per 100 feet & ccessories inch mm inch mm inch mm psi bar inch mm feet mtr. lb. kg / / / / / / / / / eneral Technical -28 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

29 Order Information xample: TP, eneral Series Hardness urometer (64 Shore ) Tube O.. in sixteenths of an inch (3/16") Tube I.. in sixteenths of an inch (1/16") Parker fittings available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: Par-arb Thermoplastic ubl-arb Hose arb ouplings Parker couplings available from: Quick oupling ivision Minneapolis, MN (763) (763) X Thermoplastic oiled ir Hose & Q Product amilies: Spectrum Series PPM Series PPL Series Notes TP is a thermoplastic elastomer formulated to withstand the rigors of peristaltic pump applications and yet, be safe enough for food and beverage applications. Suggested operating temperature range for service at rated pressures with compatible fluids is -75 to +275 (-59 to 135 ) Packaged 50 foot coils - sealed clear polyethylene bag, barcoded, 1 per box for lot traceability Special lengths available, contact Parflex division olors lack & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -29 eneral Technical

30 TP Parprene Series : ood & airy Thermoplastic eatures xcellent flexural fatigue resistance Ozone and UV light resistant Temperatures from (-75 to 275 ) brasion resistant Resistant to environmental stress cracking Lot-to-lot traceability hemically compatible with common sanitizers and cleaners xtensive range of compatible Parker fittings and couplers oiled ir Hose & pplications/markets Hot/old beverage dispensing ood and dairy processing lines hemical transfer Water purification lines Soap dispensing ertifications compliant for food contact NS-51 pproved 3- pproved Tube O.. (Ref.) Tube I.. Thickness Maximum Working Pressure Minimum end Radius Standard oil Weight per 100 feet inch mm inch mm inch mm psi bar inch mm feet mtr. lb. kg / / & ccessories / / / / / / / eneral Technical -30 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

31 Order Information xample: TP, eneral Series Hardness urometer (64 Shore ) Tube O.. in sixteenths of an inch (3/16") Tube I.. in sixteenths of an inch (1/16") Parker fittings available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: Par-arb Thermoplastic ubl-arb Hose arb ouplings Parker couplings available from: Quick oupling ivision Minneapolis, MN (763) (763) X Thermoplastic oiled ir Hose & Q Product amilies: Spectrum Series PPM Series PPL Series Notes TP is a thermoplastic elastomer formulated to withstand the rigors of peristaltic pump applications and yet, be safe enough for food and beverage applications. Suggested operating temperature range for service at rated pressures with compatible fluids is -75 to +275 (-59 to +135 ) Packaged 50 foot coils - sealed clear polyethylene bag, barcoded, 1 per box for lot traceability Special lengths available, contact Parflex division olors Tan & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -31 eneral Technical

32 Thermoplastic Polypropylene Series PP: Laboratory rade, NS Listed Series PP: Ultraviolet Light Resistant eatures cid and chemically resistant May be used in higher temperatures and working pressures than polyethylene tubing xcellent compatibility with high temperature water Low water absorption (less than.01%) ood compatibility with vegetable oils xcellent resistance to environmental stress cracking oiled ir Hose & pplications/markets ood contact - White only hemical transfer hlorinated water ertifications NS-51 oth in white; NS also in special black part numbers Tube O.. Tube I.. verage Thickness Working Pressure at 73 /23 Minimum urst at 73 /23 Reel Length Minimum end Radius Weight lbs White lack inch mm inch mm inch mm psi bar psi bar feet inch mm lbs./ft. kg./mtr. PP PP / PP PP / PP PP / PP PP / PP PP / PP PP / PP PP / & ccessories eneral Technical -32 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

33 Order Information xample: PP PP Polypropylene PP Tube O.. in sixteenths of an inch (1/2") PP Tube I.. in sixteenths of an inch (.375") PP Package Quantity in feet (250') Polypropylene (Series PP & PP) Maximum Working Pressure (psig) psi Temperature (deg. ) PP-21 PP-43 PP-86 PP-108 PP-32 PP-64 PP-53 Parker fittings available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: ompression ompress-lign Poly-Tite Hi-uty ast & Tite Prestolok rass Liquifit TrueSeal tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur. Reference /itting ompatibility hart (pg. -6) Notes NS black polypropylene tubing is available upon special request. dd - suffix to PP part number Suggested operating temperature range for service at rated pressures with compatible fluids is 0 to +200 (-18 to +93 ) olors White lack Thermoplastic oiled ir Hose & & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -33 eneral Technical

34 Polyurethane Series U: Polyether ase Thermoplastic eatures 90 to 95 Shore durometer xcellent kink and abrasion resistance xcellent hydrolytic stability lexible and easy to assemble onto designated fittings Polyurethane tubing exhibits the elongation and recovery characteristics of rubber and the chemical resistance associated with plastics oiled ir Hose & pplications/markets Pneumatic controls Robotics Machine tools eneral pneumatics Vacuum equipment nalytical instrumentation Semiconductor equipment Medical and laboratory applications Tube O.. Tube I.. verage Thickness Working Pressure at 73 /23 Minimum urst at 73 /23 Reel Length Weight lbs Natural inch mm inch mm inch mm psi bar psi bar feet lbs./ft. kg./mtr. U-21-XXXX 1/ , 0250, 0500, U-32-XXXX 3/ , 0250, U-42-XXXX 1/ U-64-XXXX 3/ , 0250, 0500, , 0250, 0500, U-85-XXXX 1/ , 0250, U-86-XXXX 1/ , 0250, & ccessories U-96-XXXX 9/ , U-128-XXXX 3/ , lso available in coils eneral Technical -34 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

35 Order Information xample: U-21-LK-0500 U-21-LK-0500 Polyurethane U-21-LK-0500 Tube O.. in sixteenths of an inch (1/8") U-21-LK-0500 Tube I.. in sixteenths of an inch (.063") U-21-LK-0500 olor (lack) (Omit for Natural) U-21-LK-0500 Package Quantity in feet (500') Opaque olor ode Transparent olor ode - Natural TLU Transparent lue LK lack TRN Transparent reen LU lue TOR Transparent Orange R ray TR Transparent Red RN reen TYL Transparent Yellow OR Orange R Red WHT White YL Yellow Polyurethane (Series U) Maximum Working Pressure (psig) Parker fittings available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: ast & Tite low ontrol Prestolok rass Prestolok omposite TrueSeal Par-arb tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur. Reference /itting ompatibility hart (pg. -6) Notes Suggested operating temperature range for service at rated pressures with compatible fluids is -40 to +180 (-40 to +82 ) olors See olor ode Table Thermoplastic oiled ir Hose & psi Temperature (deg. ) U-21, U-32, U-42, U-64, U-85, U-96, U-96, U-128 U-128 U-86 & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -35 eneral Technical

36 Thermoplastic Metric Polyurethane Series UM: Polyether ase eatures 90 to 95 Shore durometer xcellent kink and abrasion resistance xcellent hydrolytic stability lexible and easy to assemble onto designated fittings Polyurethane tubing exhibits the elongation and recovery characteristics of rubber and the chemical resistance associated with plastics oiled ir Hose & pplications/markets Pneumatic controls Robotics Machine tools eneral pneumatics Vacuum equipment nalytical instrumentation Semiconductor equipment Medical and laboratory applications Tube O.. Tube I.. verage Thickness Working Pressure at 73 /23 Minimum urst at 73 /23 Reel Length Weight lbs Natural mm inch mm inch mm inch bar psi bar psi feet kg./mtr. lbs./ft. UM4x2.5-XXXX , 0250, UM6x4-XXXX , 0250, UM8x5-XXXX , 0250, UM10x6.5-XXXX , UM12x8-XXXX , & ccessories eneral Technical -36 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

37 Order Information xample: UM6x4-LK-0100 UM6X4-LK-0100 Polyurethane Metric UM6X4-LK-0100 Tube O.. in millimeters (6 mm) UM6X4-LK-0100 Tube I.. in millimeters (4 mm) UM6X4-LK-0100 olor (lack) (Omit for Natural) UM6X4-LK-0100 Package Quantity in feet (100') Opaque olor ode Transparent olor ode - Natural TLU Transparent lue LK lack TRN Transparent reen LU lue TOR Transparent Orange R ray TR Transparent Red RN reen TYL Transparent Yellow OR Orange R Red YL Yellow Parker fittings available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: Prestolok rass Par-arb tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur. Reference /itting ompatibility hart (pg. -6) Notes The recommended operating temperature range for service at rated pressures with compatible fluids is -40 to +180 (-40 to +82 ) olors See olor ode Table Thermoplastic oiled ir Hose & Metric Polyurethane (Series UM) Maximum Working Pressure (bar) bar Temperature (deg. ) & ccessories UM (ll-sizes) or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -37 eneral Technical

38 HUR MicroWeld Thermoplastic eatures Mono-wall construction eliminates the need for skiving tools or knives, reducing installation time xcellent abrasion resistance Silicone and halogen free Weighs 36% less than equivalent covered tubing ertifications UL 94 V2 compliant oiled ir Hose & pplications/markets Robotics Welding eneral automation Tube O.. Tube I.. verage Thickness Working Pressure at 73 /23 Minimum urst at 73 /23 Reel Length Minimum end Radius Weight inch mm inch mm inch mm psi bar psi bar feet inch mm lbs./ft. kg./mtr. HUR XX / lbs HUR XX / HUR XX / & ccessories eneral Technical -38 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

39 Order Information xample: HUR L-0500 HUR L-0500 MicroWeld Polyurethane HUR L-0500 Tube O.. in sixteenths of an inch (1/4") HUR L-0500 Thickness in inches (.045") HUR L-0500 olor (lue) HUR L-0500 Package Quantity in feet (500') olor ode K lack L lue N reen R Red WH White MicroWeld (Series HUR) Maximum Working Pressure (psig) Parker fittings available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: Prestolok PLM Notes Suggested operating temperature range for service at rated pressures with compatible fluids is -40 to +180 (-40 to +82 ) olors See olor ode Table Thermoplastic oiled ir Hose & psi Temperature (deg. ) HUR-6 HUR-8 HUR-4 & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -39 eneral Technical

40 Thermoplastic Polyurethane Series HU: High urometer Polyether ase eatures 95 Shore durometer or greater xcellent kink and abrasion resistance xcellent hydrolytic stability lexible and easy to assemble onto designated fittings Polyurethane tubing exhibits the elongation and recovery characteristics of rubber and the chemical resistance associated with plastics oiled ir Hose & pplications/markets Pneumatic controls Robotics Machine tools eneral pneumatics Vacuum equipment nalytical instrumentation Semiconductor equipment Medical and laboratory applications Tube O.. Tube I.. verage Thickness Working Pressure at 73 /23 Minimum urst at 73 /23 Reel Length Weight lbs inch mm inch mm inch mm psi bar psi bar feet lbs./ft. kg./mtr. HU-2-XXXX 1/ , 0250, HU-2.5-XXXX 5/ , HU-4-XXXX 1/ , HU-6-XXXX 3/ , HU-8-XXXX 1/ , HU-12-XXXX 3/ , & ccessories eneral Technical -40 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

41 Order Information xample: HU-2-LK-0500 HU-2-LK-0500 High urometer Polyurethane HU-2-LK-0500 Tube O.. in sixteenths of an inch (1/8") HU-2-LK-0500 olor (lack) HU-2-LK-0500 Package Quantity in feet (500') olor ode LK lack LU lue L ark lue R Red YL Yellow Parker fittings available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: ast & Tite low ontrol Prestolok rass Prestolok omposite TrueSeal tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur. Reference /itting ompatibility hart (pg. -6) Notes Suggested operating temperature range for service at rated pressures with compatible fluids is -40 to +180 (-40 to +82 ) olors See olor ode Table Thermoplastic oiled ir Hose & Polyurethane (Series HU) Maximum Working Pressure (psig) psi Temperature (deg. ) & ccessories HU-2 HU-2.5 HU-4, HU-6, HU-8, HU-12 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -41 eneral Technical

42 Thermoplastic Metric Polyurethane Series HUM: High urometer (Metric) Polyether ase eatures 95 Shore durometer or greater xcellent kink and abrasion resistance xcellent hydrolytic stability lexible and easy to assemble onto designated fittings Polyurethane tubing exhibits the elongation and recovery characteristics of rubber and the chemical resistance associated with plastics oiled ir Hose & pplications/markets Pneumatic controls Robotics Machine tools eneral pneumatics Vacuum equipment nalytical instrumentation Semiconductor equipment Medical and laboratory applications Tube O.. Tube I.. verage Thickness Working Pressure at 73 /23 Minimum urst at 73 /23 Reel Length Weight lbs mm inch mm inch mm inch bar psi bar psi feet kg./mtr. lbs./ft. HUM-4-XXXX , HUM-6-XXXX , HUM-8-XXXX , HUM-10-XXXX , HUM-12-XXXX , & ccessories eneral Technical -42 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

43 Order Information xample: HUM-6-LK-0100 HUM-6-LK-0100 High urometer Metric Polyurethane HUM-6-LK-0100 Tube O.. in millimeters (6mm) HUM-6-LK-0100 olor (lack) HUM-6-LK-0100 Package Quantity in feet (100') Metric Polyurethane (Series HUM) Maximum Working Pressure (bar) Parker fittings available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: low ontrol Prestolok rass Prestolok omposite tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur. Reference /itting ompatibility hart (pg. -6) Notes Suggested operating temperature range for service at rated pressures with compatible fluids is -40 to +180 (-40 to +82 ) olors Natural lack Thermoplastic oiled ir Hose & bar Temperature (deg. ) HUM (ll Sizes) & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -43 eneral Technical

44 Vinyl Series PV: lear Vinyl Thermoplastic eatures Made from a virgin clear PV (polyvinyl chloride) resin; specifically formulated for exceptional purity, clarity and flexibility 70 durometer for soft, easy handling and bending without tubing collapse ertifications compliant oiled ir Hose & pplications/markets Low-pressure chemicals Pneumatics Low-pressure sight flow indicator Order Information xample: PV108-1 PV108-1 Poly-Vinyl PV108-1 Tube O.. in sixteenths of an inch (5/8") PV108-1 Tube I.. in sixteenths of an inch (1/2") PV108-1 ormula V-1 pproved ormulation Parker fittings available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: Poly-Tite ast & Tite TrueSeal Par-arb Hose arb arden itting & ccessories eneral Technical -44 tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur. Reference /itting ompatibility hart (pg. -6) Notes ormula V-1 tubing fully meets all specifications called out by the United States ood and rug dministration () for materials in contact with food and drugs for human consumption Suggested operating temperature range for service at rated pressures with compatible fluids is -40 to +150 (-40 to +65 ) or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

45 Tube O.. Tube I.. verage Thickness Working Pressure at 73 /23 Std. oil Weight inch mm inch mm inch mm psi bar feet lbs./ft. kg./mtr. PV21-1 1/ lbs Thermoplastic PV PV42-1 1/ PV43-1 1/ PV / PV53-1 5/ PV63-1 3/ PV73-1 7/ oiled ir Hose & PV54-1 5/ PV64-1 3/ PV74-1 7/ PV84-1 1/ PV75-1 7/ PV85-1 1/ PV95-1 9/ PV86-1 1/ PV96-1 9/ PV / PV97-1 9/ PV / PV / PV / PV / PV / PV / PV / PV / & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -45 eneral Technical

46 Vinyl (cont.) Series PV: lear Vinyl Tube O.. Tube I.. verage Thickness Working Pressure at 73 /23 Std. oil Weight Thermoplastic inch mm inch mm inch mm psi bar feet lbs./ft. kg./mtr. PV / PV / lbs PV / PV / oiled ir Hose & PV PV PV / PV / PV / PV / PV / PV / PV / PV / PV / PV / PV / PV / PV / PV / PV / PV PV / & ccessories PV / eneral Technical -46 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

47 Notes Hose Thermoplastic oiled ir Hose & & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -47 eneral Technical

48 luoropolymer luoropolymer oiled ir Hose & & ccessories eneral Technical luoropolymer luoropolymer tubing features a low coefficient of friction and anti-stick properties, high temperature capabilities and the most corrosion and chemical resistance of all polymers. Within normal use temperatures, fluoropolymers are attacked by so few chemicals that it is easier to describe the exceptions rather than list the chemicals they are compatible with (see hemical Resistance Summary, pg. -50). These chemically inert tubes are non-wetting and non-leaching, making them ideal for a wide range of fluid and material handling applications. Parker fluoropolymer tubing is available in PT, P, P and PV with some materials operating at temperatures up to 500 (260 ). ach material has specific dominant characteristics, but all operate in high-temperature, corrosive environments. Parflex PT, P, P and PV tubing complies with uropean Standard RoHs and are also compliant to regulation 21 R , making these products suitable for use in food and beverage applications. Parflex PT, P and P are listed VW-1 in the burning test for Underwriters Laboratories and pass the UL-83 vertical flame test. In a flame situation, PT, P and P tubing resist combustion and do not promote flame spread. ll fluoropolymer tubing dimensions are continuosly monitored to ensure an overall quality product. Most tubing sizes are packaged in convenient 25-ft., 50-ft., 100-ft. and 1,000-ft. lengths. PT PT (Polytetrafluorethylene) is offered in beading, smoothbore tubing, heat shrinkable, spiral wrap and convoluted tubing. PT tubing features unmatched chemical resistance and a non-stick surface that facilitates flow and eliminates media buildup. P P (luorinated thylene Propylene) is available in smoothbore tubing, heat shrinkable, convoluted, corrugated and retractable coil tubing. P tubing offers the highest clarity in the fluoropolymer market and is a close second to PT in chemical resistance. P is available in long, continuous lengths (1,000 feet and longer) whereas the longest lengths for PT range from 200 to 1,000 feet depending on size and wall thickness. P P (Perfluoroalkoxy) is available in smoothbore tubing. When temperature and clarity are both factors, P is the resin of choice because it offers the hightemperature attributes of PT, long continuous lengths, and almost as much clarity as P. High purity resins available. Low permeability. -48 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

49 luoropolymer Hose Product amily PT P Type Series Suggested pplications eading Smoothbore T TH TS TT TL Smoothbore Heat Shrink onvoluted HS2T V VL HS4T TSSS/L VH Pull ord O-Ring Seals lectrical Insulation Protective over lectrical Insulation luid Transfer lectrical Insulation Protective over luid Transport Wire Harness Spacers Woven ilter ircuit oard Wire Insulation as Sampling Laboratory ircuit oard Rollers Protection/able ore Robotics Spiral Wrap TSWT able Harnessing Wiring closets Smoothbore Heat Shrink HS1.3 HS1.6 HS1.25 TSSS TSSL onvoluted V orrugated R Retractable 703 P Smoothbore H.P. P Smoothbore P H.P. P Retractable PV Smoothbore Nitrogen illing ownhole Pump Ozone Sampling Protective overing UV Light overing Product Testing luid Transport Wire Harness Vacuum pplications Wet ench N Sequencer Lab quipment as ispensing ir Sampling as Purge Wet ench low Monitoring Systems High Purity pps. I Water ispensers Lab quipment as ispensing Outdoor/xtreme onditiions pplications with long cycle life Hearing id Optical Sensors Paper Rollers Ink Rollers Protection/able ore Robotics luid Transfer Robotics Wet ench ual ontainment low Monitoring Steam Plant I Recirculators Heat xchangers Pure hemical ispensers Wet ench ual ontainment Thermal ycling Water Systems Suggested Markets hemical High-Temp ood Instrumentation Laboratory as Sampling lectrical Insulation luid Handling Industrial quipment round Support erospace utomotive UV pplications hemical Instrumentation Laboratory as ispensing as Sampling Robotics luid Handling ood & everage Semiconductor Pharmaceutical lectrical Industrial quipment Medical hemical Laboratory Semiconductor Instrumentation ood nvironmental luid Handling as Service Pharmaceutical Medical hemical ood as/nviromental luoropolymer oiled ir Hose & High Purity P H.P. P (Perfluoroalkoxy) has the highest molecular weight available. Withstands corrosive surfactants for longer periods of time than standard products. Lowest level of extractables. PV PV (Polyvinylidene luoride) is available in flexible and super flexible smoothbore tubing. PV offers a combination of properties beneficial for use in many critical applications requiring chemical resistance with low permeability. PV exhibits low extractable levels while providing high mechanical strength and abrasion resistance. & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -49 eneral Technical

50 luoropolymer luoropolymer oiled ir Hose & & ccessories luoropolymer - Quick Reference PT (Polytetrafluoroethylene) Working Temperature: 500 (260 ) olor: Opaque to translucent hemically inert Lowest coefficient of friction Superior dielectric strength xceptional heat resistance Self extinguishing Non-wetting xcellent flexlife Laser markable P (Perfluoroalkoxy) Working Temperature: 500 (260 ) olor: lear with light blue or tint High purity resins available Low permeation resins available Use when you need the temperature range of PT and the clarity of P xceptional heat resistance Self extinguishing Non-wetting ood flexlife P (luorinated thylene Propylene) Working Temperature: 400 (204 ) olor: lear xcellent chemical resistance Non-wetting Weldable Tubes can be sealed by melting Long continuous lengths Low refractive index Improved clarity over P Lower cost alternative to P PV (Polyvinylidene luoride) Working Temperature: 265 (130 ) olor: Varies Very good chemical resistance xcellent resistance to creep and fatigue UV Resistant Weldable xceptional corrosion resistance for chlorine, fluorine, or bromine environments hemical Resistance Summary Within normal use temperatures, fluoroplastics are attacked by so few chemicals that it is easier to describe the exceptions rather than list the chemicals with which Texluor is compatible. O NOT US LUOROPLSTIS WITH TH OLLOWIN: lkali metals such as elemental sodium, potassium, lithium, etc. The alkali metals remove fluorine from the polymer molecule. xtremely potent oxidizers, fluorine (2) and related compounds (e.g., chlorine trifluoride, I3). These can be handled by Texluor, but only with great care, as fluorine is absorbed into the resins, and the mixture becomes sensitive to a source of ignition such as impact. 80% NaOH (Sodium Hydroxide) or KOH (Potassium Hydroxide), metal hydrides such as orances (e.g., 2H6), luminum hloride, mmonia (NH3), certain mines (R-NH2) and imines (R=NH) and 70% Nitric cid at temperatures near the suggested service limit. WRNIN ILUR OR IMPROPR SLTION OR IMPROPR US O TH PROUTS N/OR SYSTMS SRI HRIN OR RLT ITMS N US TH, PRSONL INJURY N PROPRTY M. This document and other information from Parker Hannifin orporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. ue to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. eneral Technical -50 The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin orporation and its subsidiaries at any time without notice. or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

51 luoropolymer Hose The table below lists a generally accepted summary of properties that we believe to be reliable. Please note that many of these resins are produced in several varieties and property characteristics may vary. Therefore, determination of resin is dependent on the application and this table is only meant to serve as a general guideline. Properties* MHNIL PROPRTIS Specific ravity longation % Tensile Strength (psi) STM or Unit (psi) 3307(psi) Pressure Ranges PT P P High Purity P PV T pressures vary by material, tubing size and wall thickness. Please contact ustomer Service for specific pressures. or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd lexural Strength (psi) 790 no break no break no break no break ompressive Strength (psi) na Tensile lastic Modulus (Young's Modulus) (psi) lexural Modulus , (psi) MPa (103kgf/cm2) 71,000-85, ( ) 50,000-78,000-92, ( ) 72,500-87,000 na 94,000-99, ( ) , , ,030 90, , ,00-110,000 lex Life (MIT cycles) 2176 >1,000,000 5,000-80,000 10, , x 10 3 na na Hardness urometer Shore oefficient of riction (on steel) brasion Resistance 1000 cycles Taber na Impact Strength IZO.. 73 (23 ) notched ft/lbs/in no break no break no break 4 no break THRML PROPRTIS Melting Point Upper Service Temperature(20000h) lammability UL 94 V-0 V-0 V-0 V-0 V-0 V-0 Thermal onductivity TU-in/hr-ft 2, º na Thermal onductivity al-cm/sec-cm 2, º 6 x x x 10-6 na na 5.7 x 10-4 Linear oefficient of Thermal xpansion Min/inº º na (10-5/ ) Heat of usion TU/L na Heat of ombustion TU/L na na 8100 Low Temperature mbrittlement LTRIL PROPRTIS ielectric onstant 150/10 3 Hz /10 6 Hz ielectric Strength 149/125 MIL na 149/10 MIL >1400 >610 >1400 na 1.5 Volume Resistivity 257/ohm-cm >10 18 >10 18 >10 18 na 2 x Surface Resistivity 257/ohm-cm >10 18 >10 17 >10 17 na 5 x >10 15 NRL PROPRTIS hemical/solvent Resistance 543 xcellent xcellent xcellent xcellent Very ood xcellent Refractive Index Limiting Oxygen Index, % 2868 >95 >95 >95 na 42/ Water ontact ngle ngle to Level na 92 na Water bsorption 24h,% 570 <0.01 <0.01 <0.03 < Weatherability xcellent xcellent xcellent xcellent xcellent xcellent *eneral resin properties; properties may vary. 130, luoropolymer oiled ir Hose & & ccessories eneral Technical

52 luoropolymer luoropolymer luoropolymer Nomenclature Smoothbore ractional and Metric N T Outside iameter Thickness oiled ir Hose & Product amily 0250 =.250 inch 0700 = 7 mm Resin amily 062 =.062 inch 100 = 1 mm Tube Packaging ulk T = efault onfiguration = olor Options* Tube ut Job (followed by cut length in inches) Length 25 = 25 ft coil 50 = 50 ft coil 100 = 100 ft coil 1000 = 1000 ft coil lank = No cut xx.xxx = Length (inch) 1 = ractional 2 = Metric 7 = Retractable oil 9 = ustom 01 = PT 03 = P 04 = P 05 = P High Purity 10 = PV: lex 11 = PV: Super-lex 12 = T NONSTNR onvoluted and orrugated V 01-1/8I- N = Natural 0 = lack 1 = rown 2 = Red 3 = Orange 4 = Yellow 5 = reen 6 = lue 7 = Violet 8 = ray 9 = White onfiguration lank = No color = S = olored Solid Tube olored Stripe on Tube L = Laser Marked & ccessories eneral Technical onvolution Profile V = onvoluted VW = onvoluted w/wire R = orrugated VL = Low Profile VH = Heavy Heavy VHW = w/wire VLW = -52 Low Profile W/wire I.. or O.. Size x/x = below 1" x.xx = 1" and up Resin amily 01 = PT 03 = P 04 = P 05 = P High Purity Overall Length in inches uff Length in inches Special onfiguration lank = efault = ully onductive I = onductive I.. uff and Options lank = No cuffs XX.XXX-1 = 1 uff XX.XXX-2 = 2 uffs or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

53 luoropolymer Hose luoropolymer Nomenclature Heat Shrink, lectrical Insulation and eading HS2 ** T T 1/8 - N T *** luoropolymer Resin amily Sizes** Tube Packaging Other Options T = PT P = P P = P T = T XX for W size 0-30 X/X for ractional sizes 1/8 to 1.00 inch T = = ulk efault onfiguration Tube ut Job (followed by cut length in inches -if cut, go to Other Options) lank = Not required xx.xxx = add cut length in inches. oiled ir Hose & Special onfigurations onfigurations olor Options* onfiguration lank if Smooth ore H = Heavy N = Natural lank = No color HS2 = 2:1 Ratio PT HS4 = 4:1 Ratio PT HS1.3 = 1.3/1:1 Ratio P HS1.6 = 1.67:1 Ratio P HS1.25 = 1.25:1 Ratio P S = Standard T = Thin L = Light I = Industrial = eading 0 = lack 1 = rown 2 = Red 3 = Orange 4 = Yellow = S = olored Solid Tube olored Stripe on Tube 5 = reen 6 = lue 7 = Violet 8 = ray 9 = White *When ordering coiled tubing in colors, the color code is always followed by T; when ordering cut lengths, the color code is followed by...ie HS2TT1/8-2T..ie HS1.3P **This first configuration is only used for heat shrinkable tubing or spiral wrap. or example, electrical insulation tubing part number would read TT-1/8-NT. ***When changing to cut length, replace the T with and specify the length in inches. If this part was cut to 4 feet, part number would read TT-1/8-N & ccessories ****Sizes for heat shrink designate the size of the heat shrink tube as stated by the applicable specification. The actual O.. of the tubing does not always match the size. Review actual tables to see the true expanded dimension of the tube. or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -53 eneral Technical

54 luoropolymer PT Series ractional & Metric: 101, 201 eatures Virgin Polytetrafluoroethylene resin hemically inert Lowest coefficient of friction Superior dielectric strength xceptional heat resistance Self extinguishing Non-wetting xcellent flexlife Laser markable oiled ir Hose & & ccessories pplications/markets Order Information able Liner lectrical Insulation Oxygen Sensor Paint Transfer as Sampling Laboratory xample: T T-100 PT T-100 Tube O.. in inches (3/16") T-100 Tube Thickness in inches (.062") T-100 lack T-100 ulk T-100 Solid olor Tube T-100 Package Quantity in feet (100') available for sizes 3/32" up to 1.1" Parker available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: ompression ompress-lign TrueSeal ertifications/ompliance MS 3653 VW1, UL-83 (natural) ompliant USP lass VI ompliant Notes Working Temperature: 500 (260 ) Working pressure calculated using a esign actor of 4 ustom packaging and sizes are quoted upon request Package quantities are not continuous olors Natural, Translucent olors available as custom run, see color code table olor ode N Natural 5 reen 0 lack 6 lue 1 rown 7 Violet 2 Red 8 ray 3 Orange 9 White 4 Yellow eneral Technical -54 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

55 101 PT Industrial ractional Size Order Size O.. I.. Reference inch inch tol. mm tol. inch tol. mm tol. inch mm psi 73 Working Pressure urst Pressure Min. end Radius / ± ± ± ± bar 23 psi 73 bar 23 inch mm Vac. Rating at 73 lb. per ft. Weight kg. per m. luoropolymer / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± oiled ir Hose & / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd ontinued on next page -55 eneral Technical

56 PT Series ractional & Metric: 101, 201 (cont.) luoropolymer 101 PT Heavy ractional Size oiled ir Hose & Order Size O.. I.. Reference inch inch tol. mm tol. inch tol. mm tol. inch mm psi 73 Working Pressure urst Pressure Min. end Radius / ± ± ± ± bar 23 psi 73 bar 23 inch mm Vac. Rating at 73 lb. per ft. Weight kg. per m /4.250 ± ± ± ± /4.250 ± ± ± ± / ± ± ± ± /8.375 ± ± ± ± / ± ± ± ± /2.500 ± ± ± ± / ± ± ± ± /8.625 ± ± ± ± / ± ± ± ± /4.750 ± ± ± ± /8.875 ± ± ± ± ± ± ± ± & ccessories eneral Technical -56 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

57 luoropolymer 201 Metric PT Order Size O.. I.. Reference mm mm tol. inch tol. mm tol. inch tol. mm inch Working Pressure urst Pressure Min. end Radius Vac. Rating ± ± ± ± bar 23 psi 73 bar 23 psi 73 mm inch at 73 Weight kg. per m. lb. per ft. oiled ir Hose & ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -57 eneral Technical

58 PT Series ractional: TL, TS, TT luoropolymer eatures Virgin Polytetrafluoroethylene resin hemically inert Lowest coefficient of friction Superior dielectric strength xceptional heat resistance Self extinguishing Non-wetting xcellent flexlife Laser markable oiled ir Hose & & ccessories pplications/markets Order Information xample: TS1/2-NT lectrical Insulation Protective over able Liner Spacer TS1/2-NT PT TS1/2-NT Standard TS1/2-NT Tube O.. in inches (1/2") TS1/2-NT Natural TS1/2-NT ulk available for sizes 3/32" up to 1.1" Parker available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: TrueSeal ertifications/ompliance MS 3653 VW1, UL-83 (natural) ompliant USP lass VI ompliant Light (TL) STM 3295 lass 1, MS 3654 Thin (TT) STM 3295 lass 2, MS 3655 Standard (TS) STM 3295 lass 3, MIL-I Notes Working Temperature: 500 (260 ) Package quantities are not continuous - ractional tubing is supplied in random length coils, with a minimum coil length of 15 feet. ustom packaging, sizes and lengths are quoted upon request. olors Natural, Translucent olors available as custom run, see color code table olor ode N Natural 5 reen 0 lack 6 lue 1 rown 7 Violet 2 Red 8 ray 3 Orange 9 White 4 Yellow eneral Technical -58 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

59 TS, TT & TL PT ractional Size I.. Standard Thin Light Standard Packaging inch inch mm Natural inch mm Natural inch mm Natural inch mm luoropolymer 1/ TS1/ TT1/ TL1/ Random Length oil 3/ TS3/ TT3/ TL3/ Random Length oil 1/ TS1/ TT1/ TL1/ Random Length oil 5/ TS5/ TT5/ TL5/ Random Length oil 3/ TS3/ TT3/ TL3/ Random Length oil 7/ TS7/ TT7/ TL7/ Random Length oil oiled ir Hose & 1/ TS1/ TT1/ TL1/ Random Length oil 5/ TS5/ TT5/ Random Length oil 3/ TS3/ TT3/ Random Length oil 7/ TS7/ Random Length oil TS Random Length oil & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -59 eneral Technical

60 PT Series W: TH, TS, TT, TL luoropolymer eatures Virgin Polytetrafluoroethylene resin hemically inert Lowest coefficient of friction Superior dielectric strength xceptional heat resistance Self extinguishing Non-wetting xcellent flexlife Laser markable oiled ir Hose & & ccessories pplications/markets Order Information xample: TH13-2T lectrical Insulation Protective over ircuit oard Wire Insulation Strain Relief Introducer Stent elivery TH13-2T PT TH13-2T Heavy TH13-2T W Size TH13-2T Red TH13-2T ulk TH13-2T Solid olor Tube Notes Working Temperature: 500 (260 ) W Spaghetti tubing is supplied in random lengths with a minimum length of 25 feet ontinuous lengths and colors quoted upon request W spaghetti tubing is also available in P and P onsult factory for pricing and minimum lengths ertifications/ompliance MS 3653 VW1, UL-83 (natural) ompliant USP lass VI ompliant Light (TL) STM 3295 lass 1, MS 3654 UL V 200 Thin (TT) STM 3295 lass 2, MS 3655, UL V 200, S V Standard (TS) STM 3295 lass 3, MIL-I-22129, UL V 200, S V Heavy (TH) STM 3295, lass 4 olors Natural, Translucent olors available as custom run, see color code table olor ode N Natural 5 reen 0 lack 6 lue 1 rown 7 Violet 2 Red 8 ray 3 Orange 9 White 4 Yellow eneral Technical -60 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

61 TH PT W Heavy Order Size I.. Minimum I.. Maximum I.. W inch mm inch mm inch mm inch mm Standard Packaging luoropolymer TH ± ± ,000 ft. Spool TH ± ± ,000 ft. Spool TH ± ± ,000 ft. Spool TH ± ± ,000 ft. Spool TH ± ± ,000 ft. Spool TH ± ± ,000 ft. Spool oiled ir Hose & TH ± ± ,000 ft. Spool TH ± ± ,000 ft. Spool TH ± ± ,000 ft. Spool TH ± ± ,000 ft. Spool TH ± ± ft. Spool TH ± ± ft. Spool TH ± ± ft. Spool TH ± ± ft. Spool TH ± ± ft. Spool TH ± ± ft. Spool TH ± ± 0.13 Random Length oil TH ± ± 0.13 Random Length oil TH ± ± 0.13 Random Length oil TH ± ± 0.13 Random Length oil ertifications STM 3295 lass 4 MS 3653 ompliant USP lass VI ompliant & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -61 eneral Technical

62 luoropolymer oiled ir Hose & & ccessories eneral Technical -62 PT Series W: TH, TL, TS, TT (cont.) TS PT W Standard Order Size I.. Minimum I.. Maximum I.. W inch mm inch mm inch mm inch mm Standard Packaging TS ± ± ,000 ft. Spool TS ± ± ,000 ft. Spool TS ± ± ,000 ft. Spool TS ± ± ,000 ft. Spool TS ± ± ,000 ft. Spool TS ± ± ,000 ft. Spool TS ± ± ,000 ft. Spool TS ± ± ,000 ft. Spool TS ± ± ,000 ft. Spool TS ± ± ,000 ft. Spool TS ± ± ,000 ft. Spool TS ± ± ,000 ft. Spool TS ± ± ft. Spool TS ± ± ft. Spool TS ± ± ft. Spool TS ± ± ft. Spool TS ± ± ft. Spool TS ± ± ft. Spool TS ± ±.0.10 Random Length oil TS ± ±.0.10 Random Length oil TS ± ±.0.10 Random Length oil TS ± ±.0.10 Random Length oil TS ± ±.0.10 Random Length oil TS ± ±.0.10 Random Length oil TS ± ±.0.10 Random Length oil TS ± ±.0.10 Random Length oil TS ± ±.0.10 Random Length oil TS ± ±.0.10 Random Length oil ertifications STM 3295 lass 3 MIL-I MS 3653 UL V 200 S V ompliant or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

63 TT PT W Thin Order Size I.. Minimum I.. Maximum I.. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd W inch mm inch mm inch mm inch mm or detailed ordering information, please consult price list or contact Parflex ivision. Standard Packaging TT ± ± ,000 ft. Spool Only TT ± ± ,000 ft. Spool TT ± ± ,000 ft. Spool TT ± ± ,000 ft. Spool TT ± ± ,000 ft. Spool TT ± ± ,000 ft. Spool TT ± ± ,000 ft. Spool TT ± ± ,000 ft. Spool TT ± ± ,000 ft. Spool TT ± ± ,000 ft. Spool TT ± ± ,000 ft. Spool TT ± ± ,000 ft. Spool TT ± ± ,000 ft. Spool TT ± ± ,000 ft. Spool TT ± ± ft. Spool TT ± ± ft. Spool TT ± ± ft. Spool TT ± ± ft. Spool TT ± ± ft. Spool TT ± ± ft. Spool TT ± ± 0.08 Random Length oil TT ± ± 0.08 Random Length oil TT ± ± 0.08 Random Length oil TT ± ± 0.08 Random Length oil TT ± ± 0.08 Random Length oil TT ± ± 0.08 Random Length oil TT ± ± 0.08 Random Length oil TT ± ± 0.08 Random Length oil TT ± ± 0.08 Random Length oil ertifications STM 3295 lass 2 MS 3653 MS 3655 UL V 200 S V ompliant USP lass VI ompliant -63 luoropolymer oiled ir Hose & & ccessories eneral Technical

64 PT Series W: TH, TL, TS, TT (cont.) luoropolymer TL PT W Light Order Size I.. Minimum I.. Maximum I.. W inch mm inch mm inch mm inch mm Standard Packaging TL ± ± ,000 ft. Spool Only TL ± ± ,000 ft. Spool oiled ir Hose & & ccessories eneral Technical -64 TL ± ± ,000 ft. Spool TL ± ± ,000 ft. Spool TL ± ± ,000 ft. Spool TL ± ± ,000 ft. Spool TL ± ± ,000 ft. Spool TL ± ± ,000 ft. Spool TL ± ± ,000 ft. Spool TL ± ± ,000 ft. Spool TL ± ± ,000 ft. Spool TL ± ± ,000 ft. Spool TL ± ± ,000 ft. Spool TL ± ± ,000 ft. Spool TL ± ± ft. Spool TL ± ± ft. Spool TL ± ± ft. Spool TL ± ± ft. Spool TL ± ± ft. Spool TL ± ± ft. Spool TL ± ± 0.05 Random Length oil TL ± ± 0.05 Random Length oil TL ± ± 0.08 Random Length oil TL ± ± 0.08 Random Length oil TL ± ± 0.08 Random Length oil TL ± ± 0.08 Random Length oil TL ± ± 0.08 Random Length oil TL ± ± 0.08 Random Length oil TL ± ± 0.08 Random Length oil ertifications STM 3295 lass 1 ompliant MS 3653 USP lass VI ompliant MS 3654 UL V 200 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

65 PT eading Series ractional: T Hose eatures Virgin Polytetrafluoroethylene resin hemically inert Lowest coefficient of friction Superior dielectric strength xceptional heat resistance Self extinguishing Non-wetting xcellent flexlife Laser markable luoropolymer pplications/markets T PT eading Pull ord O-ring Seals Spacers Woven ilter iameter Tolerance Standard Packaging inch mm inch mm T ± ± ,000 ft. Spool T ± ± ,000 ft. Spool T ± ± ,000 ft. Spool T ± ± ,000 ft. Spool T ± ± ,000 ft. Spool T ± ± ,000 ft. Spool T ± ± ,000 ft. Spool T ± ± ,000 ft. Spool T ± ± ,000 ft. Spool T ± ± ,000 ft. Spool T ± ± ,000 ft. Spool T ± ± ,000 ft. Spool T ± ± ,000 ft. Spool T ± ± ,000 ft. Spool T ± ± ,000 ft. Spool T ± ± ft. Spool T ± ± ft. Spool T ± ± ft. Spool T ± ± ft. Spool T ± ± ft. Spool T ± ± ft. Spool T ± ± ft. Spool T ± ± ft. Spool T ± ± 0.10 Random Length T ± ± 0.10 Random Length T ± ± 0.10 Random Length ertifications or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd STM 1710, Type 1, rade 1, lass STM 3295 VW1, UL-83 (natural) ompliant USP lass VI ompliant Notes Working Temperature: -100 to 500 (-75 to 260 ) Package quantities are not continuous olors Natural, Translucent olors available as custom run, see color code table Order Information xample: T028-NT T028-NT PT eading T028-NT eading O.. in inches (.028") T028-NT Natural T028-NT ulk olor ode N Natural 5 reen 0 lack 6 lue 1 rown 7 Violet 2 Red 8 ray 3 Orange 9 White 4 Yellow -65 oiled ir Hose & & ccessories eneral Technical

66 luoropolymer PT Spiral ut able Wrap Series: TSWT eatures Provides harnessing for wires and cable while allowing leads at various points xceptional heat resistance Self extinguishing lexible Superior dielectric strength oiled ir Hose & pplications/markets Order Information xample: TSWT-3/8-5T TSWT-3/8-5T Spiral Wrap able harnessing Wiring closets erospace utomotive ertifications MS 3653 STM 3295 VW1, UL-83 (natural) Notes vailable in left- or right-hand cut. Please specify with proper suffix at end of part number (i.e. TSWT-18-NT-R) Working Temperature: 500 (260 ) 100 ft. is the minimum item quantity sold Stock packaging for sizes 1/8" to 1/2" is 100- and 500-ft. noncontinuous spools and, for sizes greater than 1/2", 100-ft. non-continuous spools ustom packaging, sizes and colors are available upon request Spiral cut cable wrap is also quoted in P upon request Package quantities are not continuous olors available as custom run, see color code table TSWT-3/8-5T Material (PT) & ccessories TSWT-3/8-5T O.. in inches (.375") TSWT-3/8-5T reen TSWT-3/8-5T ulk olors Natural, Translucent olors available as custom run, see color code table olor ode N Natural 5 reen 0 lack 6 lue 1 rown 7 Violet 2 Red 8 ray 3 Orange 9 White 4 Yellow eneral Technical -66 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

67 PT Spiral Wrap O.. "" tolerance O.. "" tolerance Pitch "" tolerance Pitch Max undle O.. inch mm inch mm inch mm inch mm inch mm inch mm inch mm TSWT-1/8-NT ± ± ± / TSWT-3/16-NT ± ± ± TSWT-1/4-NT ± ± ± TSWT-3/8-NT ± ± ± / TSWT-1/2-NT ± ± ± TSWT-3/4-NT ± ± ± TSWT-1.00-NT ± ± ± luoropolymer oiled ir Hose & & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -67 eneral Technical

68 luoropolymer PT Heat Shrinkable Series 2:1 ractional: HS2TS, HS2TT, HS2TL, HS2TI eatures Virgin Polytetrafluoroethylene resin 2:1 Shrink Ratio hemically inert Lowest coefficient of friction Superior dielectric strength xceptional heat resistance Self extinguishing Non-wetting oiled ir Hose & & ccessories pplications/markets Order Information xample: HS2TI7/8-NT lectrical Insulation Protective over lectronic Harness Laboratory HS2TI7/8-NT Heat Shrink HS2TI7/8-NT Shrink Ratio (2:1) HS2TI7/8-NT PT HS2TI7/8-NT Type (Industrial ) HS2TI7/8-NT Heat Shrink Size in inches (7/8") HS2TI7/8-NT Natural HS2TI7/8-NT ulk Notes Working Temperature: -100 to 500 (-75 to 260 ) Shrink Temperature: 662 (350 ) for 10 minutes per MS-TL-23053/12 *ielectric Strength: > 1,400 V/M, per STM 149 short term test of 10 MIL thickness (Volts/MIL) PT ractional Heat Shrink tubing is available in stock packaging of 4-ft. straight lengths Minimum quantities may apply ustom packaging, sizes, lengths and colors are quoted upon request ertifications STM 2902 Type I MS 3653 VW1, UL-83 (natural) ompliant USP lass VI ompliant Light (HS2TL) MS-TL-23053/12 lass 4 Thin (HS2TT) MS-TL-23053/12 lass 3, MS 3585 Standard (HS2TS) MS-TL-23053/12 lass 2, MS 3586 Heavy (HS2TH) MS-TL-23053/12 lass 1 (ustom Order only) olors Natural, Opaque to translucent olors available as custom run, see color code table When ordering coiled tubing in colors, the color code is always followed by T; when ordering cut lengths, the color code is followed by ie HS2TI7/8-2T ie HS2TI7/ olor ode N Natural 5 reen 0 lack 6 lue 1 rown 7 Violet 2 Red 8 ray 3 Orange 9 White 4 Yellow eneral Technical -68 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

69 HS2TS & HS2TT PT ractional Heat Shrink (2:1) SW & TW Order Minimum Maximum Standard Thin Size xpanded Recovered I.. I.. Mil Spec* Recovered Mil Spec* Recovered inch inch mm inch mm inch mm inch mm 1/ / HS2TS1/ ± ± / HS2TT1/ ± ± / / HS2TS1/ ± ± / HS2TT1/ ± ± / / HS2TS5/ ± ± / HS2TT5/ ± ± / / HS2TS3/ ± ± HS2T 3/ ± ± / / HS2TS7/ ± ± HS2TT7/ ± ± / / HS2TS1/ ± ± HS2TT1/ ± ± / / HS2TS5/ ± ± HS2T 5/ ± ± / / HS2TS3/ ± ± HS2TT3/ ± ± / / HS2TS7/ ± ± HS2TT7/ ± ± / HS2TS ± ± HS2TT ± ± 0.10 HS2TL PT ractional Heat Shrink (2:1) LW Order Minimum Maximum Light Size xpanded Recovered I.. I.. Mil Spec* Recovered inch inch mm inch mm inch mm 1/ / HS2TL1/ ± ± / / HS2TL1/ ± ± / / HS2TL5/ ± ± 0.08 Inside ia. Outside ia. Size xpanded I.. Recov. I.. Recov. Recov. O.. Hose luoropolymer oiled ir Hose & HS2TI PT ractional Heat Shrink (2:1), Ind. Heavy Order Size Mil Spec* Minimum xpanded I.. Maximum Recovered I.. or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd Recovered inch inch mm inch mm inch mm HS2TI1/8 1/ / ± ± 0.13 HS2TI3/16 3/ / ± ± 0.13 HS2TI1/4 1/ / ± ± 0.13 HS2TI5/16 5/ / ± ± 0.13 HS2TI3/8 3/ / ± ± 0.13 HS2TI7/16 7/ / ± ± 0.15 HS2TI1/2 1/ / ± ± 0.15 HS2TI9/16 9/ / ± ± 0.15 HS2TI5/8 5/ / ± ± 0.15 HS2TI11/16 11/ / ± ± 0.15 HS2TI3/4 3/ / ± ± 0.18 HS2TI7/8 7/ / ± ± 0.18 HS2TI / ± ± & ccessories eneral Technical

70 PT Heat Shrinkable Series 2:1 W: HS2TS, HS2TT, HS2TL luoropolymer oiled ir Hose & & ccessories pplications/markets Order Information xample: HS2TS15-4T-500 lectrical Insulation Protective over lectronic Harness Laboratory HS2TS15-4T-500 Heat Shrink HS2TS15-4T-500 Shrink Ratio (2:1) HS2TS15-4T-500 PT HS2TS15-4T-500 Type (Standard ) HS2TS15-4T-500 Heat Shrink Size in W (W15) HS2TS15-4T-500 Yellow HS2TS15-4T-500 ulk HS2TS15-4T-500 Solid olor HS2TS15-4T-500 Package Quantity in feet (500') Notes Working Temperature: -100 to 500 (-75 to 260 ) Shrink Temperature: 662 (350 ) for 10 minutes MS-TL-23053/12 *ielectric Strength: > 1,400 V/M, per STM 149 short term test of 10 MIL thickness (Volts/MIL) PT W Heat Shrink tubing is available in stock packaging of 4-ft. straight lengths Minimum quantities may apply ustom packaging, sizes, lengths and colors are quoted upon request eatures Virgin Polytetrafluoroethylene resin 2:1 Shrink Ratio hemically inert Lowest coefficient of friction Superior dielectric strength xceptional heat resistance Self extinguishing Non-wetting ertifications STM 2902 Type I MS 3653 VW1, UL-83 (natural) ompliant USP lass VI ompliant Light (HS2TL) MS-TL-23053/12 lass 4 Thin (HS2TT) MS-TL-23053/12 lass 3, MS 3585 Standard (HS2TS) MS-TL-23053/12 lass 2, MS 3586 Heavy (HS2TH) MS-TL-23053/12 lass 1 (ustom Order only) olors Natural, Opaque to translucent olors available as custom run, see color code table When ordering coiled tubing in colors, the color code is always followed by T; when ordering cut lengths, the color code is followed by ie HS2TS15-2T ie HS2TS olor ode N Natural 5 reen 0 lack 6 lue 1 rown 7 Violet 2 Red 8 ray 3 Orange 9 White 4 Yellow eneral Technical -70 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

71 HS2TS Standard (2:1) Order Size Mil Spec* Minimum xpanded I.. Maximum Recovered I.. Recovered W inch mm inch mm inch mm HS2TS / ± ± 0.05 HS2TS / ± ± 0.05 HS2TS / ± ± 0.08 HS2TS / ± ± 0.08 HS2TS / ± ± 0.08 HS2TS / ± ± 0.08 HS2TS ± ± 0.08 HS2TS / ± ± 0.08 HS2TS / ± ± 0.08 HS2TS / ± ± 0.08 HS2TS / ± ± 0.08 HS2TS / ± ± 0.08 HS2TS / ± ± 0.08 HS2TS / ± ± 0.10 HS2TS / ± ± 0.10 HS2TS / ± ± 0.10 HS2TS / ± ± 0.10 HS2TS / ± ± 0.10 HS2TS / ± ± 0.10 HS2TS / ± ± 0.10 HS2TS / ± ± 0.10 HS2TS / ± ± 0.10 HS2TS / ± ± 0.10 ertifications MS-TL-23053/12, lass 3 MS 3585 STM 2902 Type I ompliant USP lass VI ompliant luoropolymer oiled ir Hose & Inside ia. Outside ia. Size xpanded I.. Recov. I.. Recov. Recov. O.. & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -71 eneral Technical

72 PT Heat Shrinkable Series 2:1 W: HS2TS, HS2TT, HS2TL (cont.) luoropolymer oiled ir Hose & & ccessories HS2TT Thin (2:1) Order Size Mil Spec* Minimum xpanded I.. Maximum Recovered I.. Recovered W inch mm inch mm inch mm HS2TT / ± ± 0.05 HS2TT / ± ± 0.05 HS2TT / ± ± 0.08 HS2TT / ± ± 0.08 HS2TT / ± ± 0.08 HS2TT / ± ± 0.08 HS2TT / ± ± 0.08 HS2TT / ± ± 0.08 HS2TT / ± ± 0.08 HS2TT / ± ± 0.08 HS2TT / ± ± 0.08 HS2TT / ± ± 0.08 HS2TT / ± ± 0.08 HS2TT / ± ± 0.08 HS2TT / ± ± 0.08 HS2TT / ± ± 0.08 HS2TT / ± ± 0.10 HS2TT / ± ± 0.10 HS2TT / ± ± 0.10 HS2TT / ± ± 0.10 HS2TT / ± ± 0.10 HS2TT / ± ± 0.10 HS2TT / ± ± 0.10 HS2TT / ± ± 0.10 HS2TT / ± ± 0.10 HS2TT / ± ± 0.10 *ielectric Strength: > 1,400 V/M, per STM 149 short term test of 10 MIL thickness (Volts/MIL) ertifications MS-TL-23053/12, lass 3 MS 3585 STM 2902 Type I ompliant USP lass VI ompliant eneral Technical -72 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

73 HS2TL Light (2:1) Order Size Mil Spec* Minimum xpanded I.. Maximum Recovered I.. Recovered W inch mm inch mm inch mm HS2TL / ± ± 0.05 HS2TL / ± ± 0.05 HS2TL / ± ± 0.05 HS2TL / ± ± 0.05 HS2TL / ± ± 0.05 HS2TL / ± ± 0.05 HS2TL / ± ± 0.05 HS2TL / ± ± 0.05 HS2TL / ± ± 0.05 HS2TL / ± ± 0.05 HS2TL / ± ± 0.05 HS2TL / ± ± 0.05 HS2TL / ± ± 0.05 HS2TL / ± ± 0.05 HS2TL / ± ± 0.05 HS2TL / ± ± 0.05 HS2TL / ± ± 0.08 HS2TL / ± ± 0.08 HS2TL / ± ± 0.08 HS2TL / ± ± 0.08 HS2TL / ± ± 0.08 HS2TL / ± ± 0.08 HS2TL / ± ± 0.08 *ielectric Strength: > 1,400 V/M, per STM 149 short term test of 10 MIL thickness (Volts/MIL) ertifications MS-TL-23053/12, lass 4 STM 2902 Type I ompliant USP lass VI ompliant luoropolymer oiled ir Hose & & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -73 eneral Technical

74 luoropolymer PT Heat Shrinkable Series 4:1 HS4TI eatures Virgin Polytetrafluoroethylene resin 4:1 Shrink Ratio hemically inert Lowest coefficient of friction Superior dielectric strength xceptional heat resistance Self extinguishing Non-wetting oiled ir Hose & pplications/markets lectrical Insulation Protective over Rollers ulb Protection ertifications MS-TL-23053/12, lass 5 STM 2902 Type I MS 3584 VW1, UL-83 (natural) ompliant USP lass VI ompliant & ccessories Order Information xample: HS4TI5/8-NT HS4TI5/8-NT Heat Shrink HS4TI5/8-NT Shrink Ratio (4:1) HS4TI5/8-NT PT HS4TI5/8-NT Type (Industrial ) HS4TI5/8-NT Heat Shrink Size in inches (5/8") HS4TI5/8-NT Natural HS4TI5/8-NT ulk Notes Working Temperature: -500 (260 ) Shrink Temperature: 662 (350 ) for 10 minutes MS-TL-23053/12 or full recovery, expanded diameter should be 50% larger than the diameter of the object to be recovered over *ielectric Strength: > 1,400 V/M, per STM 149 short term test of 10 MIL thickness (Volts/MIL) PT ractional Heat Shrink tubing is available in stock packaging of 4-ft. straight lengths Minimum quantities may apply ustom packaging, sizes, lengths and colors are quoted upon request olors Natural, Opaque to translucent olors available as custom run, see color code table When ordering coiled tubing in colors, the color code is always followed by T; when ordering cut lengths, the color code is followed by ie HS4TI5/8-2T ie HS4TI5/ olor ode N Natural 5 reen 0 lack 6 lue 1 rown 7 Violet 2 Red 8 ray 3 Orange 9 White 4 Yellow eneral Technical -74 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

75 HS4TI PT Industrial Heat Shrink (4:1) Order Size Mil Spec* Minimum xpanded I.. Maximum Recovered I.. Recovered inch inch mm inch mm inch mm HS4TI5/64 5/ / ± ± 0.05 HS4TI1/8 1/ / ± ± 0.05 HS4TI3/16 3/ / ± ± 0.05 HS4TI1/4 1/ / ± ± 0.05 HS4TI5/16 5/ / ± ± 0.05 HS4TI3/8 3/ / ± ± 0.05 HS4TI7/16 7/ / ± ± 0.05 HS4TI1/2 1/ / ± ± 0.10 HS4TI5/8 5/ / ± ± 0.10 HS4TI3/4 3/ / ± ± 0.10 HS4TI7/8 7/ / ± ± 0.10 HS4TI / ± ± 0.10 HS4TI / / ± ± 0.10 luoropolymer oiled ir Hose & Inside ia. Outside ia. Size xpanded I.. Recov. I.. Recov. Recov. O.. & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -75 eneral Technical

76 PT onvoluted Series onvo-tex luoropolymer oiled ir Hose & pplications/markets luid Transport Wire Harness Protection/able ore Robotics eatures hemically inert Low coefficient of friction Very flexible Self extinguishing Non-wetting ertifications MS 3653 VW1, UL-83 (natural) ompliant USP lass VI ompliant & ccessories Order Information xample: V01-1/8-NT V01-1/8-NT onvoluted V01-1/8-NT PT V01-1/8-NT Size to Order (1/8") V01-1/8-NT olor (N=Natural) V01-1/8-NT "T" is bulk (for cuffed tubing, remove "T" and add length, ie. V01-1/8-N1200 = 1" onvo, natural, cut 12" long) Notes Working Temperature: -100 to 500 (-75 to 260 ) Standard cuffs for onvo-tex are sized on the Inside iameter Wire wrap reinforcement can be added for increased pressure applications or when a tighter bend radius is needed Minimum quantities may apply ustom packaging, sizes, lengths and colors are quoted upon request olors Natural, Opaque to Translucent olors available as custom run, see color code table olor ode N Natural 5 reen 0 lack 6 lue 1 rown 7 Violet 2 Red 8 ray 3 Orange 9 White 4 Yellow eneral Technical -76 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

77 PT onvo-tex onvoluted (Standard tubing is natural) Size To Order Standard uff I.. Standard uff Length Thickness "" Min. Inside iameter "" Max. Inside iameter "" Max. Outside iameter "" **Min. end Radius inch mm inch mm inch mm inch mm inch mm inch mm inch mm V01-1/8-NT ONV-2 1/ / /8 9.5 V01-1/4-NT ONV-4 1/ / / V01-5/16-NT ONV-5 5/ / V01-3/8-NT ONV-6 3/ / V01-1/2-NT ONV-8 1/ / V01-5/8-NT ONV-10 5/ / / V01-3/4-NT ONV-12 3/ / / V NT ONV / V NT ONV / / / V NT ONV / / V NT ONV / / V NT ONV / / V NT ONV / V NT ONV / ** Minimum 36" length. luoropolymer oiled ir Hose & Standard uffs for onvo-tex are sized on the I.. & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -77 eneral Technical

78 luoropolymer PT onvoluted Series Low Profile and Heavy eatures hemically inert Low coefficient of friction Very flexible Self extinguishing Non-wetting Low Profile Larger inside diameter Increased low oiled ir Hose & & ccessories pplications/markets Order Information xample: VH01-1/8-NT luid Handling Harnesses Lab quipment Robotics VH01-1/8-NT VH - Heavywall onvoluted VL Low Profile onvoluted VH01-1/8-NT PT VH01-1/8-NT Size to Order (1/8") VH01-1/8-NT olor (N=Natural) VH01-1/8-NT "T" is bulk (for cuffed tubing, remove "T" and add length, ie. VH01-1/8-N1200 = 1"Heavy onvo, natural, cut 12" long) Notes Working Temperature: 500 (260 ) Standard cuffs for onvo-tex are sized on the Inside iameter Wire wrap reinforcement can be added for increased pressure applications or when a tighter bend radius is needed Minimum quantities may apply ustom packaging, sizes, lengths, cuffs and colors are quoted upon request Heavy Reinforces the strength of the tube allowing for braiding or covering, flanging or flaring Handles higher vacuum ertifications MS 3653 VW1, UL-83 ompliant USP lass VI ompliant olors Natural, Opaque to Translucent olors available as custom run, see color code table olor ode N Natural 5 reen 0 lack 6 lue 1 rown 7 Violet 2 Red 8 ray 3 Orange 9 White 4 Yellow eneral Technical -78 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

79 PT Low Profile onvoluted (Standard tubing is natural) Size To Order Min. Inside iameter Max. Inside iameter Max. Outside iameter Thickness **Min. end Radius inch mm inch mm inch mm inch mm inch mm VL01-3/8-NT 3/ /2 13 VL01-1/2-NT 1/ /4 19 VL01-3/4-NT 3/ VL NT /4 57 VL NT 1-1/ VL NT 1-1/ /2 89 VL NT 1-3/ /4 108 VL NT /4 121 ** Minimum 36 length. Standard uffs for Low Profile and Heavy are sized on the I.. luoropolymer oiled ir Hose & PT Heavy onvoluted (Standard tubing is natural) Size To Order Min. Inside iameter Max. Inside iameter Max. Outside iameter or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd Thickness **Min. end Radius inch mm inch mm inch mm inch mm inch mm VH01-1/4-NT 1/ /4 19 VH01-3/8-NT 3/ VH01-1/2-NT 1/ /2 38 VH01-3/4-NT 3/ VH NT /2 64 VH NT 1-1/ VH NT 1-1/ /4 95 VH NT 1-3/ /2 114 VH NT /4 120 VH NT 2-1/ VH NT VH NT ** Minimum 36 length. -79 & ccessories eneral Technical

80 PT onvoluted Series S S81914/1 and S S81914/2 luoropolymer oiled ir Hose & pplications/markets luid Handling Harnesses rush Resistant over Robotics eatures hemically inert Low coefficient of friction Very flexible Self extinguishing Non-wetting ertifications MS 3653 S S81914/1 S S81914/2 ompliant & ccessories Order Information xample: 81914/ T 81914/ T S S81914 onvoluted 81914/ T PT 81914/ T Helical onvolutions 81914/ T Size (10=1.000") 81914/ T olor (0=lack) 81914/ T "T" is bulk - (for cuffed tubing, remove "T" and add length, ie / = 187" onvo, black, cut 12" long Notes Working Temperature: 500 (260 ) is provided in black without cuffs direct from inventory Stock packaging is random coils lso availabe in close convolution 81914/2 Minimum quantities may apply ustom packaging, sizes, lengths, cuffs and colors are quoted upon request olors lack olors available as custom run, see color code table When ordering convoluted tubing in colors, the "N" designation for natural should be replaced by the correct color designator; ie 81914/ T (black bulk tubing) ie 81914/ (black tubing - 12 inches long) olor ode N Natural 5 reen 0 lack 6 lue 1 rown 7 Violet 2 Red 8 ray 3 Orange 9 White 4 Yellow eneral Technical -80 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

81 PT onvoluted (S S81914/1) (Standard tubing is black) MIL Spec* Maximum Inside iameter Minimum Inside iameter Maximum Outside iameter Maximum Thickness Minimum end Radius Pitch Weight inch mm inch mm inch mm inch mm inch mm ±1 lb./100 ft. kg./100 mtr / T / / T / / T / / T / T / / T / / T / / T / T / / T / / T / / T / T / T / T luoropolymer oiled ir Hose & *PT convoluted tubing is provided in LK without cuffs direct from the factory. lack part numbers are designated with 0T and Natural part numbers are designated with "NT" after the Mil Spec number (ie 81914/ T). Standard uffs for 81914/1 are sized on the I.. Without uffs With uffs & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -81 eneral Technical

82 luoropolymer P Series ractional & Metric: 103, 203 eatures Virgin luorinated thylene Propylene resin Translucent hemically inert Long continuous lengths Low coefficient of friction Self extinguishing Non-wetting Weldable oiled ir Hose & pplications/markets Order Information xample: N N-100 ractional N-100 P N-100 Tube O.. in inches (1/4") Nitrogen Transfer Ozone Sampling Optical Sensor Laboratory own Hole Pump ood & everage atheter Repair Syringe Tips ertifications/ompliance STM STM VW-1, UL-83 (natural) ompliant Notes USP lass VI ompliant Working Temperature: -100 to 400 (-75 to 204 ) Working pressure calculated using a esign actor of 4 at 73 (23 ) ustom packaging and sizes are quoted upon request Package quantities are not continuous & ccessories eneral Technical N-100 Tube Thickness in inches (.031") N-100 Natural N-100 Package Quantity in feet (100') available for sizes 1/8" up to 1" Parker available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: ompression ompress-lign TrueSeal -82 Options Smoothbore onvoluted orrugated Retractable oils Paratubing olors Natural, Translucent olors available as custom run, see color code table olor ode N Natural 5 reen 0 lack 6 lue 1 rown 7 Violet 2 Red 8 ray 3 Orange 9 White 4 Yellow or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

83 103 P Industrial ractional Size Hose Order Size O.. I.. Reference Working Pressure urst Pressure Min. end Radius Vac. Rating Weight inch inch tol. mm tol. inch tol. mm tol. inch mm psi / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± P Heavy ractional Size Order Size O.. I.. Reference bar 23 Working Pressure psi 73 bar 23 urst Pressure inch mm Min. end Radius at 73 Vac. Rating lb. per ft. Weight kg. per m. luoropolymer oiled ir Hose & inch inch tol. mm tol. inch tol. mm tol. inch mm psi / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± ± ± ± ± bar 23 psi 73 bar 23 inch mm at 73 lb. per ft. kg. per m. 203 Metric P Order Size O.. I.. Reference Working Pressure urst Pressure Min. end Radius Vac. Rating Weight mm mm tol. inch tol. mm tol. inch tol. mm inch ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± bar 23 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd psi 73 bar 23 psi 73 mm inch at 73 kg. per m. -83 lb. per ft. & ccessories eneral Technical

84 luoropolymer P Heat Shrinkable Series 1.3:1 HS1.3P eatures asier to shrink than PT hemically inert Low coefficient of friction Superior dielectric strength ood heat resistance Self extinguishing Non-wetting oiled ir Hose & pplications/markets Protective over UV Light overing Product Testing Rollers ertifications MS-TL-23053/11, lass 1 STM 2902 Type II STM VW-1, UL-83 (natural) ompliant USP lass VI ompliant & ccessories Order Information xample: HS1.3P HS1.3P Heat Shrink HS1.3P Shrink Ratio (1.3:1) HS1.3P P HS1.3P Heat Shrink Size in W (W 24) (or inch size use inch (3/8") HS1.3P lack HS1.3P Package Quantity in feet (48") Notes Working Temperature: 400 (204 ) Shrink Temperature: 1" ia. and below : 410 (210 ) Over 1" ia. : 430 (221 ) *ielectric Strength: > 2,000 V/M, per STM 149 short term test of 10 MIL thickness (Volts/MIL) Heat Shrink tubing is available in stock packaging of 4-ft. straight lengths Minimum quantities may apply ustom packaging, sizes, lengths and colors are quoted upon request olors Natural, Translucent olors available as custom run, see color code table When ordering coiled tubing in colors, the color code is always followed by T; when ordering cut lengths, the color code is followed by ie HS1.3P24-2T ie HS1.3P olor ode N Natural 5 reen 0 lack 6 lue 1 rown 7 Violet 2 Red 8 ray 3 Orange 9 White 4 Yellow eneral Technical -84 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

85 HS1.3P W Heat Shrink (1.3:1) Outside ia. Size Order Size W Mil Spec* Minimum xpanded I.. Maximum Recovered I.. Recovered inch mm inch mm inch mm HS1.3P / ± ± 0.05 HS1.3P / ± ± 0.05 HS1.3P / ± ± 0.05 HS1.3P / ± ± 0.05 HS1.3P / ± ± 0.05 HS1.3P / ± ± 0.05 HS1.3P / ± ± 0.05 HS1.3P / ± ± 0.08 HS1.3P / ± ± 0.08 HS1.3P / ± ± 0.08 HS1.3P / ± ± 0.10 HS1.3P / ± ± 0.10 HS1.3P / ± ± 0.10 HS1.3P / ± ± 0.10 HS1.3P / ± ± 0.10 HS1.3P / ± ± 0.10 HS1.3P / ± ± 0.10 HS1.3P / ± ± 0.10 Recov. luoropolymer oiled ir Hose & Inside ia. xpanded I.. Recov. I.. Recov. O.. HS1.3P ractional Heat Shrink (1.3:1) Order Size inch Mil Spec* Minimum xpanded I.. Maximum Recovered I.. or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd Recovered inch mm inch mm inch mm HS1.3P3/8 3/ / ± ± 0.10 HS1.3P7/16 7/ / ± ± 0.10 HS1.3P1/2 1/ / ± ± 0.10 HS1.3P5/8 5/ / ± ± 0.10 HS1.3P3/4 3/ / ± ± 0.10 HS1.3P7/8 7/ / ± ± 0.10 HS1.3P / ± ± 0.10 HS1.3P / / ± ± 0.10 HS1.3P / / ± ± 0.10 HS1.3P / / ± ± 0.10 HS1.3P / / ± ± & ccessories eneral Technical

86 luoropolymer P Heat Shrinkable Series 1.67:1 HS1.6P eatures asier to shrink than PT hemically inert Low coefficient of friction Superior dielectric strength ood heat resistance Self extinguishing Non-wetting oiled ir Hose & pplications/markets Protective over UV Light overing Product Testing Rollers ertifications MS-TL-23053/11, lass 2 STM 2902 Type II STM VW-1, UL-83 (natural) ompliant USP lass VI ompliant & ccessories Order Information xample: HS1.6P3/32-N HS1.6P3/32-N Heat Shrink HS1.6P3/32-N Shrink Ratio (1.67:1) HS1.6P3/32-N P HS1.6P3/32-N Heat Shrink Size in inches (3/32") HS1.6P3/32-N Natural HS1.6P3/32-N ut HS1.6P3/32-N Package Quantity in feet (48") Notes Working Temperature: 400 (204 ) Shrink Temperature: 1" ia. and below: 410 (210 ) Over 1" ia.: 430 (221 ) *ielectric Strength: > 2,000 V/M, per STM 149 short term test of 10 MIL thickness (Volts/MIL) Heat Shrink tubing is available in stock packaging of 4-ft. straight lengths Minimum quantities may apply ustom packaging, sizes, lengths and colors are quoted upon request olors Natural, Translucent olors available as custom run, see color code table When ordering coiled tubing in colors, the color code is always followed by T; when ordering cut lengths, the color code is followed by ie HS1.6P3/32-2T ie HS1.6P3/ olor ode N Natural 5 reen 0 lack 6 lue 1 rown 7 Violet 2 Red 8 ray 3 Orange 9 White 4 Yellow eneral Technical -86 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

87 HS1.6P ractional Heat Shrink (1.67:1) Order Size inch Mil Spec* Minimum xpanded I.. Maximum Recovered I.. Recovered inch mm inch mm inch mm HS1.6P3/32 3/ / ± ± 0.08 luoropolymer HS1.6P1/8 1/ / ± ± 0.08 HS1.6P3/16 3/ / ± ± 0.08 HS1.6P1/4 1/ / ± ± 0.08 HS1.6P3/8 3/ / ± ± 0.08 HS1.6P1/2 1/ / ± ± 0.10 HS1.6P3/4 3/ / ± ± 0.10 oiled ir Hose & HS1.6P / ± ± 0.13 HS1.6P / / ± ± 0.13 HS1.6P / ± ± 0.13 Outside ia. Size Recov. Inside ia. xpanded I.. Recov. I.. Recov. O.. & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -87 eneral Technical

88 luoropolymer oiled ir Hose & P Heat Shrinkable Roll over Series 1.25:1 HS1.25P pplications/markets Protective over Rollers eatures xtends roller life liiminates roller build up and picking Low coefficient of friction lexible ood heat resistance ertifications STM 2902 Type II VW-1, UL-83 (natural) & ccessories eneral Technical Order Information xample: HS1.25P3.50-N HS1.25P3.50-N Heat Shrink HS1.25P3.50-N Shrink Ratio (1.25:1) HS1.25P3.50-N P HS1.25P3.50-N Heat Shrink xpanded Size inches (3 1/2 in) HS1.25P3.50-N Natural HS1.25P3.50-N ut HS1.25P3.50-N Package Quantity in feet (48") Notes Working Temperature: 400 (204 ) Shrink Temperature: 347 (175 ) for 10 minutes - or high temperatures 500 (260 ), P roll covers are available ielectric Strength: > 2,000 V/M, per STM 149 short term test of 10 MIL thickness (Volts/MIL) Roll over is available in stock packaging of 4-ft. straight lengths ustom packaging, sizes, lengths and colors are quoted upon request or adhesion purposes, roll covers must be etched; tching is available on the inside diameter, outside diameter or both Minimum quantities may apply olors Natural, Translucent -88 HS P Roll over Order Minimum Size xpanded I.. inch Maximum Recovered I.. Recovered inch mm inch mm inch mm HS1.25P1/2 1/ ± HS1.25P5/8 5/ ± HS1.25P3/4 3/ ± HS1.25P7/8 7/ ± HS1.25P ± HS1.25P / ± HS1.25P / ± HS1.25P ± HS1.25P / ± HS1.25P / ± HS1.25P ± HS1.25P / ± HS1.25P ± HS1.25P ± HS1.25P ± HS1.25P ± HS1.25P ± or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

89 P/PT Heat Shrinkable ouble Shrink Series TSSS and TSSL eatures ouble Shrink encapsulates your parts as the P melts during the PT shrinking process Protects cables, tubes and other objects from moisture and dirt Self extinguishing Hose luoropolymer pplications/markets Wire splices ncapsulates fittings ertifications VW-1, UL-83 (natural) oiled ir Hose & P/PT ouble Shrink Minimum xpanded I.. Maximum Recovered I.. Recovered inch mm inch mm inch mm Standard TSSS TSSS TSSS TSSS TSSS TSSS TSSS TSSS TSSS TSSS Light TSSL TSSL TSSL TSSL TSSL TSSL TSSL TSSL TSSL TSSL or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd Order Information xample: TSSL036-N TSSL036-N ouble Shrink TSSL036-N Light TSSL036-N Size in inches (0.036") TSSL036-N Natural TSSL036-N ut TSSL036-N Package Quantity in feet (48") Notes Working Temperature: 450 (231 ) Shrink Temperature: 680 (360 ) Longitudinal hange: +/- 10% Heat Shrink tubing is available in stock packaging of 4-ft. straight lengths ustom packaging, sizes, lengths and colors are quoted upon request Minimum quantities may apply olors Natural, Translucent -89 & ccessories eneral Technical

90 P onvoluted Series: V03 and onvo-lon luoropolymer eatures uffs are sized on the I.. Very flexible Long continuous lengths Translucent hemically inert ood flexlife oiled ir Hose & pplications/markets luid Transport Vascular raft Laboratory Robotics ertifications/ompliance STM VW-1, UL-83 (natural) Order Information xample: V03-1-1/2-NT V03-1-1/2-NT onvoluted V03-1-1/2-NT P V03-1-1/2-NT Tube Size in inches (1-1/2") V03-1-1/2-NT Natural Notes Working Temperature: -100 to 400 (-75 to 204 ) olors Natural, Translucent & ccessories eneral Technical -90 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

91 P onvoluted (Standard tubing is natural) Order Size inch Standard uff I.. Standard uff Length Thickness "" Min. Inside iameter "" Max. Inside iameter Max. Outside iameter "" **Min. end Radius inch mm inch mm inch mm inch mm inch mm inch mm inch mm V03-1/4-NT 1/4 1/ / V03-5/16-NT 5/16 5/ V03-3/8-NT 3/8 3/ V03-1/2-NT 1/2 1/ V03-5/8-NT 5/8 5/ / V03-3/4-NT 3/4 3/ / V NT V NT 1-1/4 1-1/ / V NT 1-1/2 1-1/ / V NT / V NT 2-1/2 2-1/ V NT luoropolymer oiled ir Hose & ** Minimum 36" length. Standard uffs for P onvo are sized on the I.. Without uffs With uffs Standard uffs for P onvo-lon are sized on the O.. Without uffs With uffs P onvo-lon onvoluted (Standard tubing is natural) ontact ustomer Service Order Size inch Standard uff O.. Standard uff Length Thickness "" Min. Inside iameter "" or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd Max. Inside iameter Max. Outside iameter "" **Min. end Radius inch mm inch mm inch mm inch mm inch mm inch mm inch mm 1/4 x 3/8 1/ / /8 x 1/2 5/ /2 x 5/8 3/ /8 x 3/ /4 x 7/8 1-1/ / x 1 1-1/ / /4 1-1/2 ** Minimum 36" length. ontact ustomer Service for actual dimensions. -91 & ccessories eneral Technical

92 luoropolymer P onvoluted Series S S81914/3 and S S81914/4 eatures Longer lengths than PT xcellent clarity hemically inert Low coefficient of friction Superior dielectric strength ood heat resistance Self extinguishing Non-wetting oiled ir Hose & pplications/markets luid Handling Harnesses Lab quipment Robotics ertifications S S81914/3 S S81914/4 STM ompliant USP lass VI ompliant VW-1, UL-83 (natural) & ccessories Order Information xample: 81914/ NT 81914/ NT S S81914 onvoluted 81914/ NT P 81914/ NT Helical onvolutions 81914/ NT Size (01=0.187") 81914/ NT olor (N=Natural) 81914/ NT "T" is bulk (for cut tubing remove "T", add length, ie / N1200 = 187" onvo, natural, cut 12" long) Notes Working Temperature: 392 (200 ) is provided in natural without cuffs direct from inventory Stock packaging is random coils lso availabe in close convolution 81914/4 Minimum quantities may apply ustom packaging, sizes, lengths,cuffs and colors are quoted upon request olors Natural, Translucent olors available as custom run, see color code table When ordering convoluted tubing in colors, the "N" designation for natural should be replaced by the correct color designator; ie 81914/ T (black bulk tubing) ie 81914/ (black tubing - 12 inches long) olor ode N Natural 5 reen 0 lack 6 lue 1 rown 7 Violet 2 Red 8 ray 3 Orange 9 White 4 Yellow eneral Technical -92 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

93 P onvoluted (S S81914/3) (Standard tubing is natural) MIL Spec Maximum Inside iameter Minimum Inside iameter Maximum Outside iameter Maximum Thickness Minimum end Radius Pitch Weight inch mm inch mm inch mm inch mm inch mm ±1 lb./100 ft. kg./100 mtr / NT / NT / NT / NT Hose luoropolymer 81914/ NT / NT / NT / NT / NT / NT oiled ir Hose & 81914/ NT / NT / NT / NT / NT P convoluted tubing is provided in NTURL without cuffs direct from the factory. Natural part numbers are designated with NT after the Mil Spec number (ie 81914/ NT). Standard uffs for 81914/3 are sized on the I.. Without uffs With uffs & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -93 eneral Technical

94 P/P orrugated xtra lexible luoropolymer, Series R03 eatures luoropolymer apable of turning sharp corners without reducing the inside diameter of the tube xtremely flexible Kink resistant Non stick surface allows for easy cleaning xcellent clarity hemically inert vailable in P, P and High Purity P oiled ir Hose & pplications/markets Vacuum pplications Robotics Instrumentation N Sequencer luid Transfer Pharmaceutical Wet ench ertifications P - STM P - STM ompliant USP lass VI ompliant VW-1, UL-83 (natural) Order Information xample: R03-3/4-NT olors Natural, Translucent & ccessories R03-3/4-NT orrugated R03-3/4-NT P R03-3/4-NT Tube I.. when cuffed in inches (3/4") R03-3/4-NT olor (N=Natural) R03-3/4-NT "T" is bulk - for cuffed tubing add length, ie. R03-3/4-N1200 = 1" orr, natural, cut 12" long Notes Working Temperature: 200 (93 0 pressure - or higher temperatures, request P orrugated 300 (148 0 pressure Vacuum Service: 29.9 IN. Hg (759M Hg) xtension-ompression Length Ratio: pproximately 2:1 is provided in natural without cuffs direct from inventory or with cuffs, as requested at time of order Stock packaging is random coils Minimum quantities may apply orrugated tubing is also available in specialty configurations where corrugated and straight tubing run intermittently along the tube ustom packaging, sizes, lengths and colors are quoted upon request eneral Technical -94 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

95 P Tex-lex orrugated Size To Order Maximum uff I.. "" Standard uff Length "" Thickness "" Ref. Outside iameter "" orrugated Length "" Minimum end Radius inch mm inch mm inch mm inch mm ±1 inch mm R03-1/4-NT 1/ / R03-3/8-NT 3/ R03-1/2-NT 1/ luoropolymer R03-5/8-NT 5/ R03-3/4-NT 3/ / R03-7/8-NT 7/ / To be specified at time of order R NT R NT 1-1/ R NT 1-1/ oiled ir Hose & R NT R NT 2-1/ / & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -95 eneral Technical

96 Retractable oiled Single or ual ontainment, Series 703, 704, 705 luoropolymer oiled ir Hose & pplications/markets luid Handling Wet ench Lab quipment as ispensing Medical eatures xtremely flexible xcellent clarity hemically inert Low coefficient of friction ertifications P - STM P - STM ompliant USP lass VI ompliant VW-1, UL-83 (natural) Self extinguishing Non-wetting vailable in P, P and High Purity P Order Information xample: xx0012 olors Natural, Translucent & ccessories xx0012 Retractable tubing xx0012 P xx0012 Tube O.. in inches (3/16") xx0012 (0.062") xx0012 ustom Options (when needed) xx0012 Length 12" available for sizes 3/16" up to 1/2" Parker available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: ompression ompress-lign TrueSeal Notes Working Temperature: 200 (93 0 pressure - or higher temperatures, request P 300 (148 0 pressure; above these temperatures, the coils dimensions are not stable and the coils will lose their shape "X" denotes resin type - Replace "X" with 3 for P, 4 for P and 5 for HP P "xx" denotes custom options - Use when needed Standard left/right tail length is 6 inches Minimum quantities may apply ustom packaging, sizes, lengths and colors are quoted upon request eneral Technical -96 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

97 Retractable Size To Order O.. x oil Inside iameter Retracted Length "" xtended Length inch mm inch mm inch mm 70X xx0003 3/16" x 1/16" X xx0006 3/16" x 1/16" X xx0012 3/16" x 1/16" X xx0018 3/16" x 1/16" X xx0003 1/4" x 1/8" X xx0006 1/4" x 1/8" Hose luoropolymer 70X xx0012 1/4" x 1/8" X xx0018 1/4" x 1/8" X xx0003 5/16" x 3/16" X xx0006 5/16" x 3/16" X xx0012 5/16" x 3/16" X xx0018 5/16" x 3/16" X xx0003 3/8" x 1/4" oiled ir Hose & 70X xx0006 3/8" x 1/4" X xx0012 3/8" x 1/4" X xx0018 3/8" x 1/4" X xx0003 7/16" x 5/16" X xx0006 7/16" x 5/16" X xx0012 7/16" x 5/16" X xx0003 1/2" x 3/8" X xx0006 1/2" x 3/8" X xx0012 1/2" x 3/8" & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -97 eneral Technical

98 luoropolymer oiled ir Hose & & ccessories eneral Technical P Series ractional & Metric: 104, 204 pplications/markets ir Sampling as Sampling luid Transfer Laboratory Wet ench low Monitoring Steam Plant Order Information xample: N N-100 ractional N-100 P N-100 Tube O.. in inches (3/16") N-100 Tube Thickness in inches (.062") N-100 Natural N-100 Package Quantity in feet (100') available for sizes 3/32" up to 1" Parker available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: ompression ompress-lign TrueSeal -98 eatures Virgin Perfluoroalkoxy Translucent High purity resins available Low permeability xceptional heat resistance hemically inert Long continuous lengths Low coefficient of friction Self extinguishing Non-wetting Non leaching ertifications/ompliance STM VW-1, UL-83 (natural) ompliant USP lass VI ompliant Notes Working Temperature: -100 to 500 (-75 to 260 ) Working pressure calculated using a esign actor of 4 at 73 (23 ) ustom packaging and sizes are quoted upon request Package quantities are not continuous Options Smoothbore onvoluted orrugated Retractable oils Heat Shrink olors Natural, Translucent olors available as custom run, see color code table olor ode N Natural 5 reen 0 lack 6 lue 1 rown 7 Violet 2 Red 8 ray 3 Orange 9 White 4 Yellow or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

99 104 P Industrial ractional Size Order Size O.. I.. Reference Working Pressure urst Pressure Min. end Radius Vac. Rating Weight Hose inch inch tol. mm tol. inch tol. mm tol. inch mm psi / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± P Heavy ractional Size Order Size O.. I.. Reference bar 23 Working Pressure psi 73 bar 23 urst Pressure inch mm Min. end Radius at 73 Vac. Rating lb. per ft. Weight kg. per m. luoropolymer oiled ir Hose & inch inch tol. mm tol. inch tol. mm tol. inch mm psi / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± ± ± ± ± bar 23 psi 73 bar 23 inch mm at 73 lb. per ft. kg. per m. 204 Metric P Order Size O.. I.. Reference Working Pressure urst Pressure Min. end Radius Vac. Rating Weight mm mm tol. inch tol. mm tol. inch tol. mm inch ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± bar 23 psi 73 bar 23 psi 73 mm inch at 73 kg. per m. lb. per ft. & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -99 eneral Technical

100 luoropolymer High Purity P Series ractional & Metric: 105, 205 eatures Withstands corrosive surfactants for longer periods of time Highest molecular weight available Lowest level of extractables Low permeability xceptional heat resistance hemically inert Long continuous lengths Low coefficient of friction Self extinguishing Non leaching oiled ir Hose & & ccessories pplications/markets Order Information xample: N N-100 ractional N-100 High Purity P N-100 Tube O.. in millimeters (3/8") N-100 Tube Thickness in millimeters (.031") N-100 Natural N-100 Package Quantity in feet (100') available for sizes 4mm up to 12mm Parker available from: luid System onnectors ivision Otsego, MI (269) (269) X low Monitoring as Transfer ood Wet ench I Water ispensers I Recirculators Heat xchangers Pure hemical ispensers High Purity pplications ertifications/ompliance STM VW-1, UL-83 (natural) Notes ompliant USP lass VI ompliant Working Temperature: -100 to 500 (-75 to 260 ) Working pressure calculated using a esign actor of 4 at 73 (23 ) ustom packaging and sizes are quoted upon request Package quantities are not continuous Options Smoothbore onvoluted orrugated Retractable oils olors Natural, Translucent eneral Technical S Product amilies: ompression ompress-lign TrueSeal -100 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd

101 105 High Purity P Industrial ractional Size Order Size O.. I.. Reference Working Pressure urst Pressure Min. end Radius Vac. Rating Weight inch inch tol. mm tol. inch tol. mm tol. inch mm psi / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± bar 23 psi 73 bar 23 inch mm at 73 lb. per ft. kg. per m. luoropolymer 105 High Purity P Heavy ractional Size Order Size O.. I.. Reference Working Pressure urst Pressure Min. end Radius Vac. Rating Weight oiled ir Hose & inch inch tol. mm tol. inch tol. mm tol. inch mm psi / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± / ± ± ± ± ± ± ± ± * bar 23 psi 73 bar 23 inch mm at 73 lb. per ft. kg. per m. 205 Metric High P Order Size O.. I.. Reference Working Pressure urst Pressure Min. end Radius Vac. Rating Weight mm mm tol. inch tol. mm tol. inch tol. mm inch ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± bar 23 psi 73 bar 23 psi 73 mm inch at 73 kg. per m. lb. per ft. & ccessories or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd -101 eneral Technical

102 PV Polyvinylidene luoride Series PV lex : 110, Series PV Super-lex : 111 luoropolymer eatures Low extractable levels High mechanical strength ood chemical resistance High abrasion resistance xceptional thermal stability Low permeability Self extinguishing Weather resistant oiled ir Hose & & ccessories pplications/markets Order Information xample: NT NT-100 PV lex NT-100 Tube O.. in inches (5/16") NT-100 Tube Thickness in inches (.062") NT-100 Natural NT-100 ulk NT-100 Package Quantity in feet (100') available for sizes 1/8" up to 1" Parker available from: luid System onnectors ivision Otsego, MI (269) (269) X S Product amilies: ompression ompress-lign TrueSeal pplications with long cycle life as ood Thermal cycling Outdoor/extreme conditions Water systems ertifications STM 3222 ompliant round water monitoring luid and handling Notes Working Temperature: -80 to 265 (-62 to 130 ) Working pressure calculated using a esign actor of 4 at 73 (23 ) ustom packaging and sizes are quoted upon request olors Off-white olor ode N Natural 5 reen 0 lack 6 lue 1 rown 7 Violet 2 Red 8 ray 3 Orange 9 White 4 Yellow eneral Technical -102 or detailed ordering information, please consult price list or contact Parflex ivision. Parker Hannifin orporation Parflex ivision Ravenna, Ohio parker.com/pfd