TECHNICAL GUIDE LISTED

Transcription

1 P G TECHNICAL GUIDE SPLIT-SYSTEM HEAT PUMPS 10 SEER MODELS: HP018X10* THRU 060X10* (1.5 THRU 5 NOMINAL TONS) HP036X10* THRU 060X10* (3 THRU 5 NOMINAL TONS, 3 PH) LISTED ISO 9001 Certified Quality Management System CERTIFICATION APPLIES ONLY WHEN THE COMPLETE SYSTEM IS LISTED WITH ARI. Due to continuous product improvement, specifications are subject to change without notice. Visit us on the web at for the most up-to-date technical information. Additional rating information can be found at U R MA N U F A CT R E C E CE R T I F R T I UN I TA RY A R I F I I E D C A T E QU I S T A I O T O R P ME N A R S N N D A R T I AS E CT D H E AT C P U M I ON S OM P O F L Y N I Rev. A (0106) DESCRIPTION The 10 SEER Series heat pumps is the outdoor part of a versatile system of heat pumps. It is designed to be custommatched with one of UPG s complete line of evaporator sections, with each serving a specific function. Matching Air Handlers are available for upflow, downflow, or horizontal applications to provide a complete system. Electric Heaters are available, if required. Add-On coils are available for use with upflow, downflow, or horizontal furnaces and air handlers. WARRANTY 5-year limited parts warranty. 5-year limited compressor warranty. FEATURES QUALITY COILS - The coil is constructed of copper tube and aluminum fins. COIL PROTECTION - Coils are protected from damage by a polymer mesh applied between the coil face, and a PVC coated steel coil guard. PROTECTED COMPRESSOR - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of high pressure relief valve and a temperature sensor which protects the compressor if undesirable operating conditions occur. A liquid line filter-drier further protects the compressor. DURABLE FINISH - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint to steel bond, which resists corrosion and rust creep. Special primer formulas and matted-textured finish insure less fading when exposed to sunlight. LOWER INSTALLED COST - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. TOP DISCHARGE - The warm air from the top mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. LOW OPERATING SOUND LEVEL - The upward air flow carries the normal operating noise away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. LOW MAINTENANCE - Long life permanently lubricated motor-bearings need no annual servicing. EASY SERVICE ACCESS - Fully exposed refrigerant connections, a single panel covering the electrical controls, and the molex plug in the control box connecting the condenser fan make for easy servicing of the unit. SECURED SERVICE VALVES - Secured re-usable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging. U.L. and C.U.L. listed - approved for outdoor application. Certified in accordance with the Unitary Small Equipment certification program, which is based on ARI Standard 210/240. FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

2 Physical and Electrical Data - 1 Phase MODEL HP018X1021 HP024X1021 HP030X1021 HP036X1021 HP042X1021 HP048X1022 HP060X1021 Unit Supply Voltage 208/ Normal Voltage Range to 252 Minimum Circuit Ampacity Max. Overcurrent Device Amps Compressor Type 3 Recip Recip Recip Recip Recip Scroll B Scroll C Compressor Rated Load Amps Locked Rotor Crankcase Heater Yes Yes Yes Yes Yes No No Fan Motor Amps Rated Load Fan Diameter Inches Fan Motor Rated HP 1/12 1/12 1/4 1/4 1/4 1/4 1/4 Nominal RPM 1,100 1,100 1,100 1, Nominal CFM 1,850 1,850 2,750 2,750 3,150 3,350 3,350 Face Area Sq. Ft Coil Rows Deep Fin / Inches Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8 3/8 3/8 3/8 Vapor Line Set OD (Field Installed) 3/4 3/4 3/4 3/4 3/4 7/8 7/8 Unit Charge (Lbs. - Oz.) Charge Per Foot, Oz Operating Weight Lbs Physical and Electrical Data - 3 Phase MODEL HP036X1031 HP048X1032 HP060X1031 HP036X1041 HP048X1042 HP060X1041 Unit Supply Voltage 208/ Normal Voltage Range to to 504 Minimum Circuit Ampacity Max. Qvercurrent Device Amps Compressor Type 3 Inertia Scroll B Scroll C Inertia Scroll B Scroll C Compressor Rated Load Amps Locked Rotor Crankcase Heater Yes No No Yes No No Fan Motor Amps Rated Load Fan Diameter Inches Fan Motor Rated HP 1/4 1/4 1/4 1/4 1/5 1/4 Nominal RPM 1, , Nominal CFM 2,750 3,500 3,100 2,750 3,500 3,100 Coil Face Area Sq. Ft Rows Deep Fin / Inches Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8 3/8 3/8 Vapor Line Set OD (Field Installed) 3/4 7/8 7/8 3/4 7/8 7/8 Unit Charge (Lbs. - Oz.) Charge Per Foot, Oz Operating Weight Lbs Rated in accordance with ARI Standard 110, utilization range A. 2. Dual element fuses or HACR circuit breaker. 3. All scrolls listed with a superscript B are Bristol scrolls. All scrolls listed with a superscript C are Copeland scrolls. 4. The Unit Charge is correct for the outdoor unit, matched indoor coil and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add or subtract the amount of refrigerant, using the difference in length multiplied by the per foot value. 2 Unitary Products Group

3 Additional R-22 Charge / Orifice Size for Various Matched Systems - 1 Phase Outdoor Unit HP018X1021 HP024X1021 HP030X1021 HP036X1021 HP042X1021 HP048X1022 HP060X1021 Unit Orifice (s) 1 51, 53 59, 61 67, , 78, 81 81, 84, Factory R-22 Charge, lbs-oz Indoor Coil Coil Orifice 2 System Orifice - Additional Charge, Oz G2FD024S(H) G2FD030S(H) G2FD035S(H) G2FD036S(H)17/ G2FD042S(H) G2FD046S(H) G2FD048S(H)21/ G2FD060S(H) G1HD G1HD G1HD G1HD G1FA/G1UA024S14/ G1FA/G1UA030S G1FA/G1UA036S G1FA/G1UA03617/ G1FA/G1UA048S21/ G1FA/G1UA060S G1NA030S17H G1NA030S21B G1NA036S17L G1NA048S21D G1NA048S24P G1NA060S24T G1NF024SOF G1NF036SOF G1NF048SOF G1NF060SOF F2RP/F2FP F2RP/F2FP F2RP/F2FP F2RP/F2FP F2RP/F2FP F2FP F2FP FOOTNOTES: 1. These orifices are packed in the customer packet of each outdoor unit. 2. These orifices are factory mounted in the flow control device of each indoor coil. 3. TXV kit must be used with these coils to obtain system performance. (701,702,703 indicates 1TV07...series). 4. Systems matched with furnaces or air handlers not equipped with blower-off delays, may require blower Time Delay Kit #6918A50112FD PROCEDURES: 1. Unit factory charge listed on the unit nameplate includes refrigerant for the condenser, the smallest evaportor and for 15 feet of interconnecting line tubing. 2. Verify the orifice size and additional charge required for specific evaportor coil in the system using the above table. 3. Additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in the table above. 4. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + adder for evaportor + adder for line set. 5. If the orifice in the evaportor was changed, verify the evaportor nameplate has been marked with the correct orifice size. Unitary Products Group 3

4 Additional R-22 Charge / Orifice Size for Various Matched Systems - 3 Phase Outdoor Unit HP036X HP048X HP060X Unit Orifice (s) 1 71, 75 81, 84, Factory R-22 Charge, lbs-oz Indoor Coil Coil Orifice 2 System Orifice = Additional Charge, Oz G1NA036S17L G1NA048S21D G1NA048S24P G1UA048S G1UA060S G1FA048S G1FA060S G2FD042(S,H) G2FD048(S,H)21/ G2FD060(S,H) FOOTNOTES: 1. These orifices are packed in the instruction/warranty packet of each outdoor unit. 2. These orifices are factory mounted in the flow control device of each indoor coil. 3. A TXV kit must be used with these coils to obtain system performance. (701,702,703 indicates 1TV Series). PROCEDURES: 1. Unit factory charge listed on the unit nameplate includes refrigerant for the condenser, the smallest evaportor and for 15 feet of interconnecting line tubing. 2. Verify the orifice size and additional charge required for specific evaportor coil in the system using the above table. 3. Additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in the table above. 4. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + adder for evaportor + adder for line set. 5. If the orifice in the evaportor was changed, verify the evaportor nameplate has been marked with the correct orifice size. 4 Unitary Products Group

5 COOLING CAPACITY - With Air Handler Coils AIR HANDLER COOLING UNIT MODEL COIL 1 MODEL ELECTRIC 2 RATED NET MBH SEER SEER W MODEL HEAT KW CFM TOTAL SENS. W/O TXV WITH TXV 3 EER 1 PH 10 SEER HP WITH N1AH / G2FD HP018X1021 N1AHB0806 2,5,8,10 17 G2FD024(S,H) HP024X1021 N1AHB0806 2,5,8,10 17 G2FD030(S,H) HP030X1021 N1AHB1206 5,8,10,15,19 17 G2FD030(S,H) HP036X1021 N1AHB1206 5,8,10,15,19 17 G2FD036(S,H) HP042X1021 N1AHC1606 5,8,10,15,20 21 G2FD048(S,H) N1AHC1606 5,8,10,15,20 21 G2FD048(S,H) HP048X1022 N1AHD2006 8,10,15,20,25,30 24 G2FD048(S,H) N1AHD2006 8,10,15,20,25,30 24 G2FD060(S,H) HP060X1021 N1AHD2006 8,10,15,20,25,30 24 G2FD060(S,H) PH 10 SEER HP WITH N1AH / G2FD HP036X10(31,41) N1AHC ,15 21 G2FD042(S,H) N1AHC ,15 21 G2FD048(S,H) HP048X10(32,42) N1AHD ,15,29 24 G2FD048(S,H) HP060X10(31,41) N1AHD ,15,29 24 G2FD060(S,H) PH 10 SEER HP / F2RP / RC / FP / FC HP018X1021 HP024X1021 HP030X1021 HP036X1021 HP042X1021 F2RP/FP018 2,5, F2RP/FP024 5,8, F2RP/FP024 5,8, F2RP/FP030 5,8,10, F2RP/FP030 5,8,10, F2RP/FP036 5,8,10,15, F2RP/FP036 5,8,10,15, F2RP/FP042 5,8,10, F2RP/FP042 5,8,10, F2FP048 5,8,10,15,20, F2FP048 5,8,10,15,20, HP048X1022 F2FP060 5,8,10,15,20, HP060X1021 F2FP060 5,8,10,15,20, PH 10 SEER HP / F2RP / RC / FP / FC 4,5 HP036X10(31,41) F2RP/FP036 5,8,10,15, F2RP/FP042 5,8,10, F2FP048 5,8,10,15,20, HP048X10(32,42) F2FP060 5,8,10,15,20, HP060X10(31,41) F2FP060 5,8,10,15,20, Rated in accordance with DOE test procedures (Federal Register and ) and ARI Standards 210. Cooling MBH based on 80 F entering air temperature, 50% RH, and rated air flow. EER (Energy Efficiency Ratio) is the total cooling output in BTU s at a 95 F outdoor ambient divided by the total electric power in watt-hours at those conditions. SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTU s during a normal annual usage period for cooling divided by the total electric power input in watt-hours during the same period. 1. G2FD coils available with a factory installed horizontal drain pan. See price pages for specific model number. 2. Single phase units require single phase 2HK heaters. 3. TXV = Use 1TV700 Series Kit. 4. To meet R=4.2 insulation requirements, substitute F2FP for F2RP, and F2FC for F2RC. models. All ratings remain the same. 5. FG8, FG9, and FL8 furnaces and F2RP / F2RC air handlers have B.O.D. standard. - = Not applicable Unitary Products Group 5

6 COOLING CAPACITY - Upflow, Downflow, & Horizontal Furnaces and Coils FURNACE** COIL UNIT MODEL NET MBH W MODEL HP018X1021 HP024X1021 HP030X1021 HP036X1021 HP036X10(31,41) For Notes see Page 5. CFM RANGE (MIN.-MAX.) RATED CFM TOTAL SENS. COOLING SEER\\ W/O TXV SEER + TXV 1 14,17 G1FA024S14, G1FA030S G1HA024H G1HD G1NA030S17H G1NA030S21B ,17 G1UA024S14, G1UA030S ,17 G2FD024(S,H)14, G1FA030S ,21 G1FA036S17, G1HA024H G1HA036H G1HD G1NA030S17H G1NA030S21B G1UA030S ,21 G1UA036S17, ,17 G2FD024(S,H)14, G2FD030(S,H) G2FD035(S,H) G1FA036S ,21 G1FA036S17, G1HA036H G1HA036H G1HD G1NA030S17H G1NA030S21B G1UA036S ,21 G1UA036S17, G2FD030(S,H) G2FD035(S,H) G2FD036(S,H) G2FD036(S,H) ,24 G1FA048S G1HA036H G1HA036H G1HA048H G1HD G1HD G1NA036S17L G1NA048S21D ,24 G1UA048S G2FD036(S,H) G2FD036(S,H) G2FD042(S,H) G2FD046(S,H) ,24 G1FA048S G1NA036S17L G1NA048S21D ,24 G1UA048S G2FD042(S,H) EER 6 Unitary Products Group

7 COOLING CAPACITY - Upflow, Downflow, & Horizontal Furnaces and Coils (Continued) FURNACE** COOLING COIL UNIT MODEL NET MBH W MODEL EER HP042X1021 HP048X1022 HP048X10(32,42) HP060X1021 HP060X10(31,41) CFM RANGE (MIN.-MAX.) RATED CFM 21,24 G1FA048S G1HA036H * G1HA036H17T * G1HA048H G1HD G1NA048S21D ,24 G1UA048S G2FD042(S,H) G2FD046(S,H) ,24 G2FD048(S,H)21, G2FD060(S,H) ,24 G1FA048S ,24 G1FA060S21, G1HA048H G1HA060H G1HD G1HD G1NA048S21D ,24 G1UA048S ,24 G1UA060S21, ,24 G2FD048(S,H)21, G2FD060(S,H) ,24 G1FA048S G1NA048S21D ,24 G1UA048S ,24 G2FD048(S,H)21, ,24 G1FA060S21, G1HA060H24T * G1HD G1NA060S24T ,24 G1UA060S21, G2FD060(S,H) ,24 G1FA060S21, ,24 G1UA060S21, G2FD060(S,H) TXV = Use 1TV700 Series Kit. * Requires a 2FD Blower Time Delay unless a standard furnace is equipped with one. ** Refer to Quick Selection Chart for specific furnace match-up. TOTAL SENS. SEER\\ W/O TXV SEER + TXV 1 Unitary Products Group 7

8 HEATING PERFORMANCE - With Air Handler UNIT MODEL* HP018X1021 HP024X1021 HP030X1021 COIL 1 MODEL ARI HEATING 2 OUTDOOR TEMP 3 47 F 17 F HSPF -3 F 7 F 17 F 27 F 37 F 47 F 57 F MBH COP MBH COP STD MBH KW MBH KW MBH KW MBH KW MBH KW MBH KW MBH KW F2RP/F2FP F2RP/F2FP F2RP/F2FP F2RP/F2FP F2RP/F2FP F2RP/F2FP F2RP/F2FP HP036X1021 F2RP/F2FP HP036X10(31,41) F2RP/F2FP HP042X1021 F2RP/F2FP F2FP HP048X1022 F2FP F2FP HP048X10(32,42) F2FP HP060X1021 F2FP HP060X10(31,41) F2FP Rated CFM same as for cooling. 2. Heating MBH based on ARI standards of 70 DB entering indoor air, 72% RH outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation. 3. Integrated heating capacities include the effect of defrost cycles in the temperature range where they occur. COP equals MBH output divided by (total KW input x 3.412). HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period. = Not Applicable. HEATING PERFORMANCE - With Furnace Coils UNIT MODEL* HP018X1021 HP024X1021 HP030X1021 COIL 1 MODEL ARI HEATING 2 OUTDOOR TEMP 3 47 F 17 F HSPF -3 F 7 F 17 F 27 F 37 F 47 F 57 F MBH COP MBH COP STD MBH KW MBH KW MBH KW MBH KW MBH KW MBH KW MBH KW G2FD024(S,H)14, G1HD G1NA030S17H G1NA030S21B G1UA024S14, G1FA024S14, G2FD035(S,H) G2FD030(S,H) G2FD024(S,H)14, G1HD G1NA030S17H G1NA030S21B G1UA030S G1UA036S17, G1FA030S G1FA036S17, G2FD030(S,H)14, G2FD035(S,H) G2FD036(S,H) G2FD036(S,H) G1HD G1NA030S17H G1NA030S21B G1UA G1UA036S17, Unitary Products Group

9 HEATING PERFORMANCE - With Furnace Coils (Continued) UNIT MODEL* HP036X1021 HP036X10(31, 41) HP042X1021 HP048X1022 HP048X10(32, 42) G2FD036(S,H) G2FD036(S,H) G2FD042(S,H) G2FD046(S,H) G1HD G1HD G1NA036S17L G1NA048S21D G1UA048S G1FA048S G2FD042(S,H) G1NA036S17L G1NA048S21D G1UA048S G1FA048S G2FD042(S,H) G2FD046(S,H) G2FD048(S,H)21, G1HD G1NA048S21D G1NA048S24P G1UA048S G1FA048S G2FD048(S,H)21, G2FD060(S,H) G1HD G1HD G1NA048S21D G1NA048S24P G1UA048S G1UA060S21, G1FA048S G1FA060S21, G2FD048(S,H)21, G1NA048S21D G1UA048S G1FA048S For Notes see Page 7. G2FD060(S,H) G1HD HP060X1021 G1NA060S24T G1UA060S21, G1FA060S21, HP060X10(31, 41) COIL 1 MODEL ARI HEATING 2 OUTDOOR TEMP 3 47 F 17 F HSPF -3 F 7 F 17 F 27 F 37 F 47 F 57 F MBH COP MBH COP STD MBH KW MBH KW MBH KW MBH KW MBH KW MBH KW MBH KW G2FD060(S,H) G1UA060S G1FA060S Rated CFM same as for cooling. 2. Heating MBH based on ARI standards of 70 DB entering indoor air, 72% RH outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation. 3. Integrated heating capacities include the effect of defrost cycles in the temperature range where they occur. COP equals MBH output divided by (total KW input x 3.412). HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period. = Not Applicable. Unitary Products Group 9

10 ACCESSORIES Refer to Price Manual for specific model numbers. Start Assist Kit (2SA067*) Blower Time Delay - Available to increase efficiency when installed. Installs on indoor section and maintains blower for approximately one minute after cooling thermostat has been satisfied. Hard Start Kits - Provides required starting torque for use with Thermal Expansion Valve Kit. Low Temperature Cutout (2LT ) - Prevents heat pump operation below -10 F ambient temperature. Compressor Blanket - Designed to further reduce the normal operating sound. Add-on Fossil Fuel Control - Interface controls for use with gas, oil furnaces and the heat pump system are available. Thermal Expansion Valve Kit - 1TV0700 Series TXV kit used to improve system performance. Outdoor Thermostat (2TD ) - Provides additional staging of supplemental electric heat. Room Thermostats - A wide selection of matching thermostats is available to provide features required for any installation. 2H/1C, manual change-over electronic non-programmable thermostat. 3H/2C, non-programmable digital thermostat. 3H/2C, auto/manual changeover, electronic programmable, 7-day, hardwire thermostat. * For the most current accessory information, refer to the price book or consult factroy. SOUND RATINGS* UNIT MODEL SOUND RATINGS DECIBELS *Rated in accordance with ARI Standard 270. A All dimensions are in inches. They are subject to change without notice. Certified dimensions will be provided upon request DIMENSIONS - 1 PHASE Unit Model Dimensions (Inches) Refrigerant Connection Service Valve Size A 1 B C Liquid Vapor / / /8 1. Including fan guard. DIMENSIONS - 3 PHASE Unit Model Dimensions (Inches) Refrigerant Connection Service Valve Size A 1 B C Liquid Vapor / /8 7/ /8 1. Including fan guard. B C TYPICAL INSTALLATION 60 OVERHEAD CLEARANCE 10 CLEARANCE COIL AREA MINIMUM 18 SERVICE ACCESS CLEARANCE ON ONE SIDE WEATHERPROOF DISCONNECT SWITCH THERMOSTAT TO FURNACE OR AIR HANDLER TERMINAL BLOCK NEC CLASS 1 WIRING NEC CLASS 2 WIRING TO INDOOR COIL NOTE: ALL OUTDOOR WIRING MUST BE WEATHERPROOF. SEAL OPENING(S) WITH PERMAGUM OR EQUIVALENT CONTROL ACCESS PANEL 10 Unitary Products Group

11 TYPICAL FIELD WIRING - 1 PH ALL FIELD WIRING TO BE IN ACCORDANCE WITH ELECTRIC CODE (NEC) AND/OR LOCAL CODES R BorC Y O W LorX G T 2 E 2 THERMOSTAT INDOOR UNIT OUTDOOR UNIT 1 FIELD INSTALLED JUMPER 1 JUMPER TERMINALS E AND W TOHEAT ON FIRST STAGE DURING EMERGENCY HEAT. 2 TERMINAL NOT USED ON ALL THERMOSTATS. POWER WIRING 24V CONTROL WIRING (NEC CLASS 2) LOW VOLTAGE TERMINAL BLOCK 3,4 DEFROST IN AIR HANDLER WITH ELECTRIC HEAT CONTROL R RED R C BLK C Y YEL Y O ORG O W2 BRN W PUR X/L G WHT W1/66 W1 5GRY CC BK DEHUMIDIFICATION CONTROL CONNECTION (Humidistat* Jumper must be removed) GND. LUG CIRCUIT BREAKER*** CONTACTOR T2 L2 M T1 L1 POWER WIRING 208/ GND. SCREW 3 CHECK THE LOW VOLTAGE TERMINAL BLOCK ON THE INDOOR UNIT FOR THE ACTUAL ARRANGEMENT OF THE TERMINALS. 4 CONNECT POWER WIRING TO TERMINAL BLOCK 3TB ON UNITS WITHOUT ELECTRIC HEAT OR CIRCUIT BREAKER. 5 GRAY FOR USE WITH OPTIONAL OUTDOOR THERMOSTAT KITS. TYPICAL FIELD WIRING - 3 PH ( ) ALL FIELD WIRING TO BE IN ACCORDANCE WITH ELECTRIC CODE (NEC) AND/OR LOCAL CODES R BorC Y O W X G T 2 E 2 THERMOSTAT INDOOR UNIT OUTDOOR UNIT 1 FIELD INSTALLED JUMPER 1 JUMPER TERMINALS E AND W TOHEAT ON FIRST STAGE DURING EMERGENCY HEAT. 2 TERMINAL NOT USED ON ALL THERMOSTATS. 3 TERMINAL NOT USED ON ALL THERMOSTATS. POWER WIRING 24V CONTROL WIRING (NEC CLASS 2) GND. LUG 3,4 LOW VOLTAGE TERMINAL BLOCK IN AIR HANDLER WITH ELECTRIC HEAT R C Y O W X 53 G DEFROST CONTROL RED R BLK C YEL Y ORG O BRN W PUR X WHT W1/66 POWER SUPPLY 208/ CONTACTOR T2 M L2 T1 L1 POWER WIRING 208/ GND. SCREW 3 CHECK THE LOW VOLTAGE TERMINAL BLOCK ON THE INDOOR UNIT FOR THE ACTUAL ARRANGEMENT OF THE TERMINALS. 4 CONNECT POWER WIRING TO TERMINAL BLOCK 3TB ON UNITS WITHOUT ELECTRIC HEAT OR CIRCUIT BREAKER. 5 REQUIRED ON ALL ELECTRIC HEAT 5 FIELD INSTALLED JUMPER T3 L3 Unitary Products Group 11

12 COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. HP018X1021 INDOOR COIL MODEL NO. F2RP/F2FP018 CONDENSER ID CFM AIR ID DB ( F) TEMPERATURE ID WB ( F) T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW Multipliers for determining the perfomrance with other indoor sections. Air Handler Coil T.C. S.C. KW N1AHB0806 G2FD024S F2RP/F2FP G1FA024S14, G1FA030S G1HD G1NA030S17H G1NA030S21B G1UA024S14, G1UA030S G2FD024S14, Unitary Products Group

13 COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. HP024X1021 INDOOR COIL MODEL NO. F2RP/F2FP030 CONDENSER ID CFM AIR ID DB ( F) TEMPERATUR ID WB ( F) T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW Multipliers for determining the perfomrance with other indoor sections. Air Handler Coil T.C. S.C. KW N1AHB0806 G2FD030S F2RP/F2FP G1FA030S G1FA036S17, G1HD G1NA030S17H G1NA030S21B G1UA030S G1UA036S17, G2FD024S14, G2FD030S G2FD035S Unitary Products Group 13

14 COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. HP030X1021 INDOOR COIL MODEL NO. F2RP/F2FP036 CONDENSER ID CFM AIR ID DB ( F) TEMPERATURE ID WB ( F) T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW Multipliers for determining the perfomrance with other indoor sections. Air Handler Coil T.C. S.C. KW N1AHB1206 G2FD030S F2RP/F2FP G1FA036S G1FA036S17, G1HD G1NA030S17H G1NA030S21B G1UA036S G1UA036S17, G2FD030S G2FD035S G2FD036S G2FD036S Unitary Products Group

15 COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. HP036X1021, HP036X10(31,41) INDOOR COIL MODEL NO. F2RP/F2FP036 CONDENSER ID CFM AIR ID DB ( F) TEMPERATURE ID WB ( F) T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW Multipliers for determining the perfomrance with other indoor sections. 1 Phase 3 Phase Air Handler Coil T.C. S.C. KW Air Handler Coil T.C. S.C. KW N1AHB1206 G2FD036S N1AHC1646 G2FD042S F2RP/F2FP F2RP/F2FP G1FA048S G1FA048S G1HD G1NA036S17L G1HD G1NA048S21D G1NA036S17L G1UA048S G1NA048S21D G2FD042S G1UA048S G2FD036S G2FD036S G2FD042S G2FD046S Unitary Products Group 15

16 COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. HP042X1021 INDOOR COIL MODEL NO. F2RP/F2FP042 CONDENSER ID CFM AIR ID DB ( F) TEMPERATURE ID WB ( F) T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW Multipliers for determining the perfomrance with other indoor sections. Air Handler Coil T.C. S.C. KW N1AHC1606 G2FD048S F2FP G1FA048S G1HD G1NA048S21D G1UA048S G2FD042S G2FD046S G2FD048S21, G2FD060S Unitary Products Group

17 COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. HP048X1022, HP048X10(32,42) INDOOR COIL MODEL NO. F2FP048 CONDENSER ID CFM AIR ID DB ( F) TEMPERATURE ID WB ( F) T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW Multipliers for determining the perfomrance with other indoor sections. 1 Phase 3 Phase Air Handler Coil T.C. S.C. KW Air Handler Coil T.C. S.C. KW N1AHC1606 G2FD048S N1AHC1646 G2FD048S N1AHD2006 G2FD048S N1AHD2046 G2FD048S N1AHD2006 G2FD060S F2FP F2FP G1FA048S G1FA048S G1NA048S21D G1FA060S21, G1UA048S G1HD G2FD048S21, G1HD G1NA048S21D G1UA048S G1UA060S21, G2FD048S21, G2FD060S Unitary Products Group 17

18 COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. HP060X1021 INDOOR COIL MODEL NO. F2FP060 CONDENSER ID CFM AIR ID DB ( F) TEMPERATURE ID WB ( F) T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW Multipliers for determining the perfomrance with other indoor sections. Air Handler Coil T.C. S.C. KW N1AHD2006 G2FD060S G1FA060S21, G1HD G1NA060S24T G1UA060S21, G2FD060S Unitary Products Group

19 COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. HP060X10(31,41) INDOOR COIL MODEL NO. G2FD060S24 CONDENSER ID CFM AIR ID DB ( F) TEMPERATURE ID WB ( F) T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW Multipliers for determining the performance with other indoor sections. Air Handler Coil T.C. S.C. KW N1AHD2046 G2FD060S F2FP060 G1FA060S21, G1FA060S21, G1UA060S21, Unitary Products Group 19

20 HEATING PERFORMANCE DATA CONDENSING UNIT MODEL NO. EVAPORATOR COIL MODEL NO. OUTDOOR UNIT INDOOR COIL HP018X1021 F2RP/F2FP018 Multipliers for determining the performance with other indoor sections. ID CFM MBTUH K.W C.O.P. MBTUH KW C.O.P. MBTUH KW C.O.P Air Handler Coil MBH KW COP N1AHB0806 G2FD024S14, F2RP/F2FP G2FD024S14, G1HD G1NA030S17H G1NA030S21B G1UA024S14, G1FA024S14, G1UA030S G1FA030S Unitary Products Group

21 HEATING PERFORMANCE DATA CONDENSING UNIT MODEL NO. EVAPORATOR COIL MODEL NO. OUTDOOR UNIT INDOOR COIL HP024X1021 F2RP/F2FP030 Multipliers for determining the performance with other indoor sections. ID CFM MBTUH KW C.O.P. MBTUH KW C.O.P. MBTUH KW C.O.P Air Handler Coil MBH KW COP N1AHB0806 G2FD030S F2FP G2FD035S G2FD030S G2FD024S14, G1HD G1NA030S17H G1NA030S21B G1UA030S G1UA036S17, G1FA030S G1FA036S17, Unitary Products Group 21