SysCoil 2. Fan Coil Units Models SVC, SVN, SHC, SHN to 8.75kW to 4.90kW. 94 to /h

Transcription

1 SysCoil Fan Coil Units Models SVC, SVN, SHC, SHN 0.79 to 8.75kW 0.49 to 4.90kW 94 to /h

2

3 SysCoil Quality, efficiency and reliability Vertical console units with cabinet, SVC type SVC vertical console units are designed for use in three different types of installation: as a wall hung console in areas where a skirting board prevents the use of a floor mounted console ; as a floor console with optional front air intake FA (most frequently located below a large window) ; as a floor console with support feet and bottom air intake. They feature a modern decorative style cabinet with matching plastic discharge grille, providing a high performance unit that is attractive and durable which will complement any room decor. The SVC models can be fitted, as optional, with electromechanical or electronic Aqu@Net control, with valve kits, etc. Support feet supplied as optional Vertical concealed units without cabinet, SVN type SVN vertical chassis only units are designed for applications that require a fully concealed or a fully recessed installation. These units include all the features of the SVC vertical console unit type except that only the chassis is supplied instead of decorative style cabinet. Like the SVC units, Aqu@Net control (except the remote control) as well as other electromechanical controls and valve kits can be fitted, as optional, on unit. Units can be fitted with optional feet (supplied loose), if floor mounting is required. Bottom air intake grille supplied as optional Ceiling exposed units with cabinet, SHC type SHC ceiling exposed units are designed for ceiling mounting in areas where it is necessary to conserve floor space. They contain all the features of the SVC unit within the decorative style cabinet with matching plastic discharge grille. Standard version is designed for rear horizontal air intake without inlet grille. Similar to the previous models, the Aqu@Net control can be supplied, as optional, on SHC units with remote control. Other optional controls and valve kits are also available. Ceiling concealed units without cabinet, SHN type SHN ceiling chassis units are designed for concealed or recessed ceiling installations. This unit consists of the SHC basic unit horizontally installed. SHN units contain all the features of the SHC ceiling exposed units except that only the chassis casing is supplied instead of the decorative style cabinet. Possibility of supplying separately an optional Aqu@Net type remote control for wall mounting. Other optional controls and valve kits are also available.

4 SysCoil New range of fan coil units SysCoil : "Innovation for an optimum comfort" Design features Easy to install, improvement in sound levels and performances, Aqu@Net electronic control, etc., are the key developments carried on our fan coil units. The SysCoil II fan coil unit range is issued from that development striving to meet customers wishes and advices. Aesthetic of the grille, associated with the casing refined finish allows a harmonious and smart integration of the fan coil units SysCoil in all types of interiors. They are the ideal solution to air condition agreeably and efficiently, flats, hotels, hospitals, offices and other premises, all year long. The SysCoil fan coil units range includes 8 sizes with air flows ranging from 94 to 930 m 3 /h, for cooling capacities of 490 to 4870 W and for heating capacities of 70 to 590 W. Cabinet All units are manufactured from heavy-gauge zinc coated sheet steel for long life and durability. Oven baked powder epoxy paint insures a good protection and an attractive finish for all outside panels (Standard colour : RAL 9003). The standard discharge grille is made of "ABS" plastic and has a different colour from the cabinet (standard colour : Pantone 47C). On the versions with optional front intake, monobloc grille, painted in RAL 9003, is mounted flush to the cabinet. Grille can be removed by releasing the two quarter turn fixing screws to get access to the filter. Casing Made of galvanized steel insulated with closed cell polyethylene foam. Casing has 3 slotted lugs on its rear side which allow the unit to be easily and quickly installed at site, in wall or ceiling mounting. Access to all internal components of the unit is facilitated by an easy dismounting of the casing. Condensate drain pan monoblock is made from galvanized sheet steel coated with closed cell polyethylene foam on external face. The drain pan is painted to ensure the anticorrosion protection. All models are equipped with an inclined condensate drain pan to ensure optimal condensate draining and to minimize water retention. The SysCoil fan coil units are equipped with optimized coils to bring the best possible performances in -pipes, 4-pipes, or -pipes/-wires versions. SysCoil range is provided with an electronic control : Aqu@Net, whose ergonomic and discrete remote command can be loose or fitted on the fan coil unit. All settings being made at factory, no needs to be done by installer. This control, especially innovating, offers as standard a master/slave function up to 5 units from one single remote control. Other features like window contact, occupied/ unoccupied, antifreeze modes are integrated without involving any price add. Coils Made of staggered copper tubes, mechanically expanded into aluminium fins, assuring maximum heat transfer efficiency. The units are equipped, in their standard -pipes configuration, with a main chilled water coil with rows (SysCoil 0), 3 rows (SysCoil 0 to 70) and 4 rows (SysCoil 90). In the 4-pipes configuration, the unit is equipped, in the same block with 3 rows (SysCoil 0), 4 rows (SysCoil 0 to 90), with chilled water coil and heated water coil row (on an independent circuit). Each coil is supplied with headers having air vent at the highest point and drain plug at the lowest point. Note : The water connection side is defined left-hand or right-hand when observer is looking at the unit from the discharge side.

5 SysCoil 3 New range of fan coil units SysCoil : "Innovation for an optimum comfort" Fan and motor assembly The units are fitted with a fan-motor assembly of which the fan is composed of double inlet forward curved centrifugal wheel(s) dynamically balanced and specially designed for an optimal air flow and a low noise level.. The SysCoil range can be supplied with types of motor : The standard AC motor of asynchrone direct drive type having 5 speeds, 3 of them are factory prewired, equipped with a built-in normally closed thermal protection of automatic reset type. The EC motor of high efficiency and low electrical consumption type for a significant energy saving. The motor is suitable for 0-0 V input, ensuring variable speed capability. It is fitted with ECospeed3 interface card (supplied as standard) for a 3-speed optimized running. Power supply : 30 V±0%/ Ph/50 Hz - 60 Hz. Filter Filter media is mounted on a metallic frame. Efficiency: G / G3 Electrical connections Units are supplied complete with internal electrical wiring terminating in a junction block protected by a cap or the cabinet. Cabinet internal space allows installation of optional control systems supplied by manufacturer or others. When the optional Aqu@Net control is fitted on the unit, the controller includes a junction block for power supply connection and incorporates, as standard, a cable clamp. Controls SysCoil units can be factory fitted with the following optional controls : Electronic communicating Aqu@Net control with RCL remote control RCL remote control Aqu@Net controller can be provided with NIU interface card to be used with µbms or eniu interface card for connection to a BMS via ModBus protocol. µbms and NIU interface card Electromechanical or electronic control for wall mounting. TAE0 Options Many different options and accessories are available for all units : see chapter "Mounting accessories". TRM-FA Electromechanical control : CMV, TBMV. TBMV CMV

6 4 SysCoil Models designation SC0. VC. SYS. P. 500W. EC. SS3S4. L. G3. CMV. 3W. FTG + FA REP. Size Version Description SC0 : SysCoil 0 SC0 : SysCoil 0 VC : Console mouting Model with casing VN : Console mouting Model without casing SC30 : SysCoil 30 SC40 : SysCoil 40 SC50 : SysCoil 50 SC60 : SysCoil 60 HC SC70 : SysCoil 70 SC90 : SysCoil 90 : Horizontal ceiling mounting Model with casing HN : Horizontal ceiling mounting Model without casing Brand SYS : SYSTEMAIR Coil P : pipes 4P : 4 pipes Blank : Without heater Electric 500W : Capacity 500W heater 000W : Capacity 000W Fan type Blank : AC fan EC : EC fan Blank : Standard wired (SS3S5) Wired S : Speed speed S : Speed Service side L : Left R : Right Air filter G : G filter G3 : G3 filter Blank : Terminal block J CMV : Manual switch TBMV : Manual thermostat + L Manual Change over + M Fan speed selector D : Aquanet pipes/without valve/ N Regulation cooling only E : Aquanet pipes/valve/cooling only P F : Aquanet pipes/without valve/ heating only Q G : Aquanet pipes/valve/heating only H : Aquanet pipes/valve/heating only/ Change over Blank : Without valve Valve W : way valve 3W : 3 way valve Air intake Option Blank : Without feet FT : feet FTG : feet + grid BACK-MO : Back air intake/ auto damper FA-REMOV : Front air intake/ removable panel FA : Front air intake FH : Fuse holder PUMP : Condensate lift pump C/O : Change over 50W : Capacity 50W 500W : Capacity 500W S3 : Speed 3 S4 : Speed 4 S5 : Speed 5 : Aquanet pipes/without valve/ heating only/change over : Aquanet 4 pipes/valve : Aquanet pipes/cooling only/ electric heater : Aquanet pipes/without valve/ reversible cycle /Change over : Aquanet pipes/valve/ reversible cycles/change over : Aquanet pipes/valve/ reversible cycle/change over/ electric heater BACK-MA : Back air intake/manual damper FLOOR-MO : Floor air intake/auto damper FLOOR-MA : Floor air intake/ manual damper RCL NIU : Remote control RCL : µbms compatible communication board NIU for Aquanet eniu : Modbus communication board eniu for Aquanet NOECO : Without Ecospeed3

7 SysCoil 5 Product Codes AC Motor Product codes pipes 4 pipes SVN SHN SVN SHN ORACLE 7OG OG OG OG M description.sc0.vn.p.l.g.+.sc0.hn.p.l.g.+.sc0.vn.4p.l.g.+.sc0.hn.4p.l.g.+ Product codes ORACLE 7OG0340 7OG OG OG03407 M description.sc30.vn.p.l.g.+.sc30.hn.p.l.g.+.sc30.vn.4p.l.g.+.sc30.hn.4p.l.g.+ Product codes ORACLE 7OG0340 7OG OG OG03407 M description.sc40.vn.p.l.g.+.sc40.hn.p.l.g.+.sc40.vn.4p.l.g.+.sc40.hn.4p.l.+ Product codes ORACLE 7OG OG OG OG M description.sc50.vn.p.l.g.+.sc50.hn.p.l.g.+.sc50.vn.4p.l.g.+.sc50.hn.4p.l.g.+ Product codes ORACLE 7OG OG OG OG M description.sc60.vn.p.l.g.+.sc60.hn.p.l.g.+.sc60.vn.4p.l.g.+.sc60.hn.4p.l.g.+ EC Motor Product codes pipes 4 pipes SVN SHN SVN SHN ORACLE 7OG OG OG OG M description.sc0.vn.p.ec.l.g.+.sc0.hn.p.ec.l.g.+.sc0.vn.4p.ec.l.g.+.sc0.hn.4p.ec.l.g.+ Product codes ORACLE 7OG0340 7OG OG OG03408 M description.sc30.vn.p.ec.l.g.+.sc30.hn.p.ec.l.g.+.sc30.vn.4p.ec.l.g.+.sc30.hn.4p.ec.l.g.+ Product codes ORACLE 7OG0340 7OG OG OG03408 M description.sc40.vn.p.ec.l.g.+.sc40.hn.p.ec.l.g.+.sc40.vn.4p.ec.l.g.+.sc40.hn.4p.ec.l.g.+ Product codes ORACLE 7OG OG OG OG M description.sc50.vn.p.ec.l.g.+.sc50.hn.p.ec.l.+.sc50.vn.4p.ec.l.g.+.sc50.hn.4p.ec.l.g.+ Product codes ORACLE 7OG OG OG OG M description.sc60.vn.p.ec.l.g.+.sc60.hn.p.ec.l.g.+.sc60.vn.4p.ec.l.g.+.sc60.hn.4p.ec.l.g.+

8 6 SysCoil Energy performance of SysCoil with new generation EC motor Electrical consumption with AC motor (in Watts) -pipes System Models Size 0 Size 0 Size 30 Size 40 Size 50 Size 60 Size 70 Size 90 V N.C N.C V N.C N.C V N.C N.C V N.C N.C V N.C N.C Without control consumption, static pressure 0 Pa. 4-pipes System Models Size 0 Size 0 Size 30 Size 40 Size 50 Size 60 Size 70 Size 90 V N.C N.C V N.C N.C V N.C N.C V N.C N.C V N.C N.C Without control consumption, static pressure 0 Pa. Electrical consumption with EC motor (in Watts) Energy savings -pipes System Models Size 0 Size 0 Size 30 Size 40 Size 50 Size 60 Size 70 Size 90 V N.C N.C V N.C N.C V N.C N.C V N.C N.C V N.C N.C Without control consumption, static pressure 0 Pa. 4-pipes System Models Size 0 Size 0 Size 30 Size 40 Size 50 Size 60 Size 70 Size 90 V N.C N.C V N.C N.C V N.C N.C V N.C N.C V N.C N.C Without control consumption, static pressure 0 Pa. 3-speed control interface for EC motor Aqu@Net Interface card EC motor 3 speeds 0 to 0 V ECoSpeed3

9 SysCoil 7 SysCoil - Mounting Accessories Wall mounting with cabinet - SysCoil SVC STD FT FTG FA BACK-MO FLOOR-MO BACK-MA FLOOR-MA standard version for wall mounting (no support feet supplied). support feet for floor mounting. air intake grille between feet. front air intake grille (no support feet supplied). air intake arrangement with motorized (non controlled) on/off damper (back or front intake). air intake arrangement with motorized (non controlled) on/off damper (floor or front intake). air intake arrangement with manual damper (back or/and front intake). air intake arrangement with manual damper (floor or/and front intake). STD FT / FTG FA FLOOR-MO */ FLOOR-MA * BACK-MO */ BACK-MA * * Can be fitted with optional intake grille between feet

10 8 SysCoil SysCoil - Mounting Accessories Wall mounting without cabinet - SysCoil SVN STD FT FA BACK-MO FLOOR-MO BACK-MA FLOOR-MA standard version for wall mounting (no support feet supplied). support feet for floor mounting. front air intake. air intake arrangement with motorized (non controlled) on/off damper (back or front intake). air intake arrangement with motorized (non controlled) on/off damper (floor or front intake). air intake arrangement with manual damper (back or/and front intake). air intake arrangement with manual damper (floor or/and front intake). STD FT FA FLOOR-MO / FLOOR-MA BACK-MO / BACK-MA

11 SysCoil 9 SysCoil - Mounting Accessories Ceiling mounting with cabinet - SysCoil SHC STD FA FLOOR-MO FLOOR-MA FT FTG standard ceiling mounted version with rear air intake (no inlet grille). bottom air intake grille. air intake arrangement with motorized (non controlled) on/off damper. air intake arrangement with manual damper. support feet. air intake grille between feet. STD FT / FTG FLOOR-MO */ FLOOR-MA * FA * Can be fitted with optional intake grille between feet

12 0 SysCoil SysCoil - Mounting Accessories Ceiling mounting without cabinet - SysCoil SHN STD FLOOR-MO FLOOR-MA FA standard ceiling mounted version with rear air intake (no inlet grille). air intake arrangement with motorized (non controlled) on/off damper. air intake arrangement with manual damper. bottom air intake. STD FLOOR-MO / FLOOR-MA FA

13 SysCoil Available Options -way control valve - -pipes system - 30 Volt thermal actuator valve, -way type - For -pipes system on cooling or heating coil WG Valve Thermal actuator 30 V - 50/60 Hz Models KV Ø T max amb T max fluid Id (A) In (A) P (VA) 0/60,6 /" 50 C 0 C 0,6 0,03 3,0 70/90,5 3/4" 50 C 0 C 0,6 0,03 3,0 -way control valve - 4-pipes system - 30 Volt thermal actuator valves. -way type - For 4-pipes system on cooling and WG heating coils Cooling Heating Moteur(s) thermique(s) 30 V - 50/60 valve valve Hz Models KV Ø KV Ø T max amb T max fluid Id (A) In (A) P (VA) 0/60,6 /",6 /" 50 C 0 C 0,6 0,03 3,0 70/90,5 3/4",6 /" 50 C 0 C 0,6 0,03 3,0 3-way control valve - -pipes system - 30 Volt thermal actuator valve. 3-way type - For -pipes system on cooling or heating coil W4G Valve Thermal actuator 30 V - 50/60 Hz Models KV Ø T max amb T max fluid Id (A) In (A) P (VA) 0/60,6 /" 50 C 0 C 0,6 0,03 3,0 70/90,5 3/4" 50 C 0 C 0,6 0,03 3,0 3-way control valve - 4-pipes system - 30 Volt thermal actuator valves. 3-way type - For 4-pipes system on cooling and W4G heating coils Cooling Heating Thermal actuator(s) valve valve 30 V - 50/60 Hz Models KV Ø KV Ø T max amb T max fluid Id (A) In (A) P (VA) 0/60,6 /",6 /" 50 C 0 C 0,6 0,03 3,0 70/90,5 3/4",6 /" 50 C 0 C 0,6 0,03 3,0

14 SysCoil Main Controls (Optional) CMV (supplied fitted) Manual fan speed selector TBMV (supplied fitted) Electromechanical control with valve(s) SVC SVC SVN SVN SHC SHC SHN SHN 4 position manual fan speed selector : OFF/LS/MS/HS. Action on valves and fan, 4-pipes, -pipes/-wires or manual changeover -pipes system. Set of thermostat + summer/winter switch + 4-position manual speed selector: OFF/LS/MS/HS. For 4-pipes or manual changeover -pipes system, possibility of mounting a low temperature cut-out sensor SD (temp. range 45 C/35 C) on hot water piping to stop fan operation TRM-FA (supplied loose) Electromechanical remote control TAE0 (supplied loose) Electronic remote thermostat SVC SVC SVN SVN SHC SHC SHN SHN Wall mounted remote thermostat to control valves and fan. Suitable for 4-pipes (with cooling and heating valves), -pipes/-wires (with cooling valve and electric heater), -pipes (with cooling or heating valve) and reversible -pipes (with manual changeover) systems. Control buttons : ON/OFF; Summer/Winter changeover; Manual fan speed selector : LS/MS/HS. Adjustable dead zone electronic thermostat with summer/winter automatic changeover. Suitable for 4-pipes (with cooling and heating valves), -pipes/-wires (with cooling valve and electric heater (TAE 0BE)), -pipes (with cooling or heating valve) or reversible -pipes (with or without extra electric heating, 4-way valve mandatory and SEH changeover sensor) system. Controls buttons : ON/OFF, manual fan speed selector : LS/MS/HS, NO (normally open) or NC (normally closed) window contact CF.

15 MODE SWING UNIT TEMP NIGHT PROG LOCAL DAY SET CLEAR Wed HOUR AUTO SysCoil 3 Main Controls (Optional) Aqu@Net communicating electronic control FCC electronic controller (supplied fitted) Aqu@Net communicating electronic control System networking UNIT C + µbms Minisupervision station Bus RS485 up to 00 units SVC SVN SHC SHN RCL wire remote control FCC controller up to 00 units Controller can be configured in -pipes heating only or cooling only, -pipes/-wires, reversible -pipes with or without extra electric heating or 4-pipe system. Other pre-programmed functionalities included : master/slaves up to 5 units controlled from one remote control only; NC window contact; automatic or manual selection of unoccupied mode; antifreeze mode. RS485 communication bus system allowing user to monitor 00 fan coil units through a supervision station (µbms), with FCC Aqu@Net controllers fitted with interface boards (NIU) and with local controls (RCL). Max. length of bus = 000 meters, shielded twisted pair cable. RCL wire remote control with digital display (supplied loose or fitted) µbms programmable supervision station (supplied loose) NIU board Wire remote control for wall mounting or for mounting on AWC units. Keyboard with locking device and buttons : ON/Standby; fan operation (auto or manual); operation mode (cooling, heating, auto or fan operation only); temperature setpoint adjustment in different modes. Functioning LED. In association with FCC controllers through a communication bus and interface board (NIU), µbms allows 5 different zones with 00 units to be managed. Other functionalities included either in global or individual control by zone : Daily and weekly programming of running times ( hour ranges), Programming and setting of temperature setpoints (cooling, heating, auto), Choice of operation mode (cooling, heating, auto or fan operation only), Choice of fan operation speed (auto or manual). OO OO OO OO

16 4 SysCoil Technical Data Electrical data without electric heating with electric heating BE heating capacity Max. absorbed BE Models Max. absorbed current current heating capacity Max. absorbed current AC motor EC motor AC motor EC motor AC motor EC motor A A W A A W A A / / / / / / () Available 0.7 in steps.88 suitable 50 for Aqu@Net control Operating range with EC motor : Voltage setpoint Minimum starting voltage Maximum voltage Models (V) (V) N.C 80 N.C Water volume (liters) Models Water volume (liters) pipes 4 pipes 000 () ( ) 500 () (50+50) 500 () (50+50) 500 () (50+50) 500 () (50+50) 500 () (50+50) Operating limits Environmental conditions Water circuit Minimum premise air temperature / new air intake / around the apparatus 5 C / 5% HR Maximale premise air temperature / new air intake / around the apparatus 3 C / 70% HR Max. operating pressure 5 bars Min. entering water temperature (without glycol) +5 C Max. entering water temperature +90 C

17 SysCoil 5 Performance Data - -pipes System AC Motor Models Speeds Humid air flow (m 3 /h) Water flow (l/h) WPD (kpa) Cooling Pt (W) Ps (W) Heating Pc (kw) V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V N.C N.C N.C N.C N.C N.C V N.C N.C N.C N.C N.C N.C V3 N.C N.C N.C N.C N.C N.C V4 N.C N.C N.C N.C N.C N.C V5 N.C N.C N.C N.C N.C N.C V N.C N.C N.C N.C N.C N.C V N.C N.C N.C N.C N.C N.C V3 N.C N.C N.C N.C N.C N.C V4 N.C N.C N.C N.C N.C N.C V5 N.C N.C N.C N.C N.C N.C Performances based on : ² ² Summer : air 7 C/9 C (wet bulb) and chilled water 7/ C. ² ² Winter : air 0 C, entering water température 50 C, water flow identical to cooling mode.. Pt : Total cooling capacity. Ps : Sensible cooling capacity. Pc : Heating capacity. WPD : Water pressure drop Standard wiring of the 3 speeds. Other speed combinations available upon request.

18 6 SysCoil Performance Data - -pipes System EC Motor Models Speeds Humid air flow (m 3 /h) Water flow (l/h) WPD (kpa) Cooling Pt (W) Ps (W) Heating Pc (kw) V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V N.C N.C N.C N.C N.C N.C V N.C N.C N.C N.C N.C N.C V3 N.C N.C N.C N.C N.C N.C V4 N.C N.C N.C N.C N.C N.C V5 N.C N.C N.C N.C N.C N.C V N.C N.C N.C N.C N.C N.C V N.C N.C N.C N.C N.C N.C V3 N.C N.C N.C N.C N.C N.C V4 N.C N.C N.C N.C N.C N.C V5 N.C N.C N.C N.C N.C N.C Performances based on : ² ² Summer : air 7 C/9 C (wet bulb) and chilled water 7/ C. ² ² Winter : air 0 C, entering water température 50 C, water flow identical to cooling mode.. Pt : Total cooling capacity. Ps : Sensible cooling capacity. Pc : Heating capacity. WPD : Water pressure drop Standard wiring of the 3 speeds. Other speed combinations available upon request.

19 SysCoil 7 Performance Data - 4-pipes System AC Motor Models Speeds Humid air flow (m 3 /h) Cooling Pt (kw) Ps (kw) Water flow (l/h) WPD (kpa) Heating Pc (kw) Water flow (l/h) WPD (kpa) V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V N.C N.C N.C N.C N.C N.C N.C N.C V N.C N.C N.C N.C N.C N.C N.C N.C V3 N.C N.C N.C N.C N.C N.C N.C N.C V4 N.C N.C N.C N.C N.C N.C N.C N.C V5 N.C N.C N.C N.C N.C N.C N.C N.C V N.C N.C N.C N.C N.C N.C N.C N.C V N.C N.C N.C N.C N.C N.C N.C N.C V3 N.C N.C N.C N.C N.C N.C N.C N.C V4 N.C N.C N.C N.C N.C N.C N.C N.C V5 N.C N.C N.C N.C N.C N.C N.C N.C Performances based on : ² ² Summer : air 7 C/9 C (wet bulb) and chilled water 7/ C. ² ² Winter : air 0 C, hot water 70/60 C Pt : Total cooling capacity. Ps : Sensible cooling capacity. Pc : Heating capacity. WPD : Water pressure drop Standard wiring of the 3 speeds. Other speed combinations available upon request

20 8 SysCoil Performance Data - 4-pipes System EC Motor Models Speeds Humid air flow (m 3 /h) Cooling Pt (kw) Ps (kw) Water flow (l/h) WPD (kpa) Heating Pc (kw) Water flow (l/h) WPD (kpa) V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V N.C N.C N.C N.C N.C N.C N.C N.C V N.C N.C N.C N.C N.C N.C N.C N.C V3 N.C N.C N.C N.C N.C N.C N.C N.C V4 N.C N.C N.C N.C N.C N.C N.C N.C V5 N.C N.C N.C N.C N.C N.C N.C N.C V N.C N.C N.C N.C N.C N.C N.C N.C V N.C N.C N.C N.C N.C N.C N.C N.C V3 N.C N.C N.C N.C N.C N.C N.C N.C V4 N.C N.C N.C N.C N.C N.C N.C N.C V5 N.C N.C N.C N.C N.C N.C N.C N.C Performances based on : ² ² Summer : air 7 C/9 C (wet bulb) and chilled water 7/ C. ² ² Winter : air 0 C, hot water 70/60 C Pt : Total cooling capacity. Ps : Sensible cooling capacity. Pc : Heating capacity. WPD : Water pressure drop Standard wiring of the 3 speeds. Other speed combinations available upon request

21 SysCoil 9 Sound Data AC Motor Models Speeds SysCoil - pipes Lw global Lp* global (dba) (dba) NR* SysCoil - 4 pipes Lw global Lp* global (dba) (dba) V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V N.C N.C N.C N.C N.C N.C V N.C N.C N.C N.C N.C N.C V3 N.C N.C N.C N.C N.C N.C V4 N.C N.C N.C N.C N.C N.C V5 N.C N.C N.C N.C N.C N.C V N.C N.C N.C N.C N.C N.C V N.C N.C N.C N.C N.C N.C V3 N.C N.C N.C N.C N.C N.C V4 N.C N.C N.C N.C N.C N.C V5 N.C N.C N.C N.C N.C N.C NR* (*) Informative data, considering a sound attenuation of the room and installation of 6 db.

22 0 SysCoil Sound Data EC Motor Models Speeds SysCoil - pipes Lw global Lp* global (dba) (dba) NR* SysCoil - 4 pipes Lw global Lp* global (dba) (dba) V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V N.C N.C N.C N.C N.C N.C V N.C N.C N.C N.C N.C N.C V3 N.C N.C N.C N.C N.C N.C V4 N.C N.C N.C N.C N.C N.C V5 N.C N.C N.C N.C N.C N.C V N.C N.C N.C N.C N.C N.C V N.C N.C N.C N.C N.C N.C V3 N.C N.C N.C N.C N.C N.C V4 N.C N.C N.C N.C N.C N.C V5 N.C N.C N.C N.C N.C N.C NR* (*) Informative data, considering a sound attenuation of the room and installation of 6 db.

23 SysCoil Dimensions SysCoil SVC Front view Rear view - SVC 0 to 60 G G 68 A - D 33 C 46 condensate drain pan 5 00 B Bottom View Top view Electrical side protection cap Ground level condensate outlet 33 Ø ext. 6mm 0 B 00 0 B 00 0 Ground level Rear view - SVC M8 fixing screws 4 x 8mm G 68 A - 33 D C condensate drain pan Ground level M8 fixing screws 4 x 8mm F E F H E Models A B C D E F G H Weight / / / / / / Dimensions are in millimeters ; weight in kilograms.

24 SysCoil Dimensions SysCoil SVN Front view Rear view - SVN 0 to 60 - G A D C 0 E M8 fixing screws 4 x 8mm F Ground level Electrical side protection cap condensate drain pan 0 0 B Ground level Bottom View Rear view - SVN G 68 A - 33 D C B 0 H E condensate drain pan F 00 Ground level M8 fixing screws 4 x 8mm Top view 33 condensate outlet Ø ext. 6mm Models A B C D E F G H Weight / / / / / / Dimensions are in millimeters ; weight in kilograms.

25 SysCoil 3 Dimensions SysCoil SHC Front view Rear view 0 condensate outlet Ø ext. 6mm 33 Electrical side protection cap D A C G B E F Top view - SHC 0 to 60 Top view - SHC A D E H F 07 M8 fixing screws 4 x 8mm condensate drain pan M8 fixing screws 4 x 8mm C condensate drain pan Bottom View Models A B C D E F G H Weight / / / / / / Dimensions are in millimeters ; weight in kilograms.

26 4 SysCoil Dimensions SysCoil SHN Front view Rear view condensate drain pan Electrical side protection cap A D 6 46 C - A G B 05 E F condensate outlet Ø ext. 6mm Top view - SHN 0 to 60 Top view - SHC A D E H F 07 M8 fixing screws 4 x 8mm condensate drain pan M8 fixing screws 4 x 8mm C condensate drain pan Bottom View Models A B C D E F G H Weight / / / / / / Dimensions are in millimeters ; weight in kilograms.

27 SysCoil 5 Dimensions - Water connections SysCoil SVN / SVC 0 Right - 4 pipes Left - 4 pipes Ground level Ground level Right - pipes Left - pipes 00 Ground level 05 Ground level 00 Inlet Outlet Inlet Outlet pipes or or 4 pipes / /

28 6 SysCoil Dimensions - Water connections SysCoil SVN / SVC 0 to 60 Right - 4 pipes Left - 4 pipes Ground level Ground level Right - pipes Left - pipes 00 Ground level 05 Ground level 00 Inlet Outlet Inlet Outlet pipes or or / / 4 pipes

29 SysCoil 7 Dimensions - Water connections SysCoil SVN / SVC Right - 4 pipes Left - 4 pipes Ground level Ground level 00 Right - pipes Left - pipes 00 Ground level 5 38 Ground level 00 Inlet Outlet Inlet Outlet pipes or or 4 pipes / /

30 8 SysCoil Dimensions - Water connections SysCoil SHN / SHC 0 Right - 4 pipes Left - 4 pipes Right - pipes Left - pipes Inlet Outlet Inlet Outlet pipes or or / / 4 pipes

31 SysCoil 9 Dimensions - Water connections SysCoil SHN / SHC 0 to 60 Right - 4 pipes Left - 4 pipes Right - pipes Left - pipes Inlet Outlet Inlet Outlet pipes or or 4 pipes / /

32 30 SysCoil Dimensions - Water connections SysCoil SHN / SHC Right - 4 pipes Left - 4 pipes Right - pipes Left - pipes Inlet Outlet Inlet Outlet pipes or or 4 pipes / /

33 Notes SysCoil 3

34 3 SysCoil Notes

35

36 Systemair AC SAS route de Verneuil, 7570 Tillières-sur- Avre Tél Fax Systemair EDM SYSCOIL -S-GB/ Supersedes : None As part of our ongoing product improvement programme, our products are subject to change without prior notice. Non contractual photos. june 05