Regelventile Control valves Robinet à soupape
|
|
- Silvia Dawson
- 6 years ago
- Views:
Transcription
1 aureihe / Series / Séries MV 5300 / PV 6300 Motorventile für die Drosselung, Mischung und Verteilung flüssiger und gasförmiger Medien Nennweite DN , Nenndruck PN Durchgangs- und Dreiwegeform Optimale Regelcharakteristik durch angepaßte Innengarnituren bsperrkegel, Parabolkegel, Lochkegel, Kronenkegel Ventilgehäuse aus GG 25, GGG 40.3, GS-C 25, GS 17 CrMo 55, Niro Motorized control valves for throttling, mixing and distribution of liquids and gases Nominal diameter DN nominal pressure PN Two-way and three-way design Optimum control by adjusted cone assemblies On/off cone, parabolic cone, perforated cone or V-port regulating cone. body material made of GG 25, GGG 40.3, GS-C 25, GS 17 CrMo 55, stainless steel Robinets à soupapes motorisés pour le contrôle de débit, le mélange et la distribution des fluides Diamètre nominal DN Pression nominale PN À passage droit ou à trois voies Clapet d'arrêt, clapet parabolique, clapet perforé ou clapet laterne Corps en GG 25, GGG40.3, GS-C 25, GS 17 CrMo 55, acier inoxydable usschreibungstext Regelventil MV 53 / PV 63 in Durchgangsform / Dreiwegeform DN PN Gehäuse aus Spindelabdichtung Kegelform Kvs. mit elektrischem Stellantrieb ST 511_-.., nschlußspannung Schutzart IP 65 Specification Control valve MV 53 / PV 63 in two-way / three-way design DN PN body material made of Spindle packing Conetype Kvs with electric actuator ST 511_-.. powersupply protection IP 65
2 Technische Daten Nennweite: DN Nenndruck: PN Spindelabdichtung: Dachmanschetten PTFE/Kohle (bis 250 C) Presspackung Reingrafit (bis 400 C) Technical data Nominal diameter: DN Nominal pressure: PN Spindle packing chevron rings PTFE/graphite (max. 250 C) stuffing box / pure graphite (max. 400 C) Faltenbalgabdichtung mit Sicherheitsstopfbuchse (bis 350 C) bellows seal with safety stuffing box (max. 350 C) Kegelarten: Parabolkegel, bsperrkegel, Kronenkegel, Mischkegel für Dreiwegeventil (siehe Datenblatt Kegeltypen ). Cone types: On/off cone, parabolic cone, V-regulating cone, mixing cone for three-way valve (See data sheet cone types ). Kvs- Werte: siehe Datenblatt Kvs- Werte Dichtheit im bschluß: nach DIN EN 60534, Teil 4, Klasse IV Gehäusewerkstoffe: GG 25 bis PN 16 GGG40.3 bis PN 25 GS-C25 bis PN 40 GS 17 CrMo 55 ab PN bis PN 40 Max Druck / Temp.: nach DIN EN 1092 Kvs-value: see data sheet Kvs-values Seat leakage: according to DIN EN 60534, part 4, class IV body material: GG 25 PN 16 only GGG40.3 up to PN 25 GS-C25 up to PN 40 GS 17 CrMo 55 from PN up to PN 40 Max pressure / temp.: according to DIN EN 1092 Werkstoffe: siehe Ersatzteilblatt Material: see spare parts list auformen Types MV 53.. / PV Ventil in Durchgangsform mit Stopfbuchsabdichtung..14 Ventil in Durchgangsform mit Faltenbalgabdichtung und Sicherheitsstopfbuchse..21 Ventil in Dreiwegeform mit Stopfbuchsabdichtung..24 Ventil in Dreiwegeform mit Faltenbalgabdichtung und Sicherheitsstopfbuchse MV 53.. / PV two-way valve with spindle packing chevron rings..14 two-way valve with bellows seal and safety stuffing box..21 three-way valve with spindle packing chevron rings..24 three -way valve with bellows seal and safety stuffing box Optionen Flansche mit Nut nach DIN 2512 Form N Sitzpanzerung Kegel aus Ferro-Titanit (siehe Datenblatt ) Kegel mit Weichstoffdichtung Lochkegel Lochkegel gehärtet Verteilkegel für Dreiwegeventile options flanges with groove acc. to DIN 2512 shape N stellited seat cone made of ferro-titanium (see data sheet ) cone with soft seat perforated cone hardened perforated cone diverting cone for three-way valves Technische Daten Stellantrieb Siehe separates technisches Datenblatt Elektr. Stellantrieb ST Pneum. Stellantrieb ST Technical data actuator See separate technical data sheet Electric ctuator ST Pneumatic ctuator ST
3 Maßblatt / dimension sheet / cotes d'encombrement, PN 16-40, PN MV 5314 / MV 5324, ST 5113 PN PN MV 5314 MV 5324 Gewicht weight poids DN PN L H 1 SL1 2 SL2 3 SL3 4 SL4 2-W 3-W
4 Maßblatt / dimension sheet / cotes d'encombrement, PN 16-40, PN MV 5314 / MV 5324, ST 5114 PN PN MV 5314 MV 5324 Gewicht weight poids DN PN L H 1 SL1 2 SL2 3 SL3 4 SL4 2-W 3-W
5 Maßblatt / dimension sheet / cotes d'encombrement PV 6311 / PV 6321, PN PV 6311 / PV 6321, PN PV 6314 / PV 6324, ST 6122 PV 6311 / PV 6321 PN PV 6311 / PV 6321 PN PV 6314 PN 16/25 PV 6324 PN 16/25 Gewicht weight poids DN PN L H 1 SL1 2 SL2 3 SL3 4 SL4 2-W 3-W
6 Ersatzteilliste / spare parts list / liste de rechange Pos D G FR GG 25;GGG40.3;GS-C 25 VG... Gehäuse body corps FSIR... Sitzring seat ring siège GG 25;GGG40.3;GS-C 25 VD... Deckel bonnet couverde 300 VK... Kegelgruppe cone assembly clapet FKKP... Kegelkopf cone head clapet Kegelspindel cone spindle tige Kegelspindel cone spindle tige Metallbalg metal bellow soufflet 304 PTFE mit 25% Glasfaser Führungsring bush douille 400 CVSHHNE Spindelabdichtung spindle packing 401 Ms 58 Überwurfmutter cap nut écrou à chapeau 402 Rg 7 Führungsbuchse fairlead bush douille 403 Rg 7 Führungsring bush douille Distanzrohr spacer tube d'écartement 405 N 90 bstreifring scraper ring anneau racleur 406 PTFE GDID... Dachmanschetten chevron rings manchettes Scheibe washer rondelle 408 X 12 CrNi 177 Druckfeder spring ressort 409 NR O-Ring o-ring joint torique 420 CVSHONE Spindelabdichtung spindle packing 421 Rg 7 Führungsbuchse fairlead bush douille 422 DIN M10X20 Sechskantschraube bolt vis á tete 423 N 90 bstreifring scraper ring anneau racleur 424 PTFE GDID... Dachmanschetten chevron rings manchettes 425 EPDM O-Ring o-ring joint torique 426 DIN 1804; M85x2 verz. Nutmutter slotted ring nut écrou à rainures Scheibe washer rondelle 428 H II; C 22 Trägerplatte mounting plate Plaque support Druckfeder spring ressort 430 Rg 7 uchse bush douille 431 G-z 12 uchse bush douille 440 CVSHHLOE Sicherh.stopfbuchse safety stuffing box Überwurfmutter cap nut écrou à chapeau Scheibe washer rondelle 443 DIN Sechskantschraube bolt vis á tete 444 Reingraphit FDIF... Flachdichtring gasket joint plat 445 PTFE weiß bstreifring scraper ring anneau racleur 446 PTFE weiß GDID... Dachmanschetten chevron rings manchettes Scheibe washer rondelle Tellerfederpacket spring washer rondelles-ressort 449 DIN H verz. Gewindestift grub screw goujon filetée 450 Klingersil C 4400 Dichtring seal ring joint 451 DIN Sechskantschraube bolt vis á tete C 35 Y Sechskantmutter nut écrou six pans Ck 35 Yk Stiftschraube stud tige filetée Reingraphit FDIF... Flachdichtring gasket joint plat 601 GGG 40.3;GS-C 25 V... -Flansch -flange -bride 800 CVSHHN Spindelabdichtung spindle packing Distanzrohr spacer tube d'écartement 802 Rg 7 Führungsring bush douille 803 Reingraphit Presspackung packing garniture 804 Rg 7 Stopfbuchse stuffing box boite 805 Ms 58 Überwurfmutter cap nut écrou à chapeau 820 CVSHON Spindelabdichtung spindle packing 821 Rg 7 uchse bush douille 822 Reingraphit Presspackung packing garniture 823 H II; C 22 Trägerplatte mounting plate Plaque support 824 DIN 1804; M85x2 verz. Nutmutter slotted ring nut écrou à rainures Stopfbuchse stuffing box boite 826 DIN Stiftschraube stud tige filetée 827 DIN Sechskantmutter nut écrou six pans
7 Ersatzteilliste / spare parts list / liste de rechange MV 5311, PV 6311, DN 15-65, PN 40 MV 5321, PV 6321, DN 20-80, PN MV 5311, PV 6311, DN , PN 40 MV 5321, PV 6321, DN , PN MV 5314, PV 6314, DN , PN 25 MV 5324, PV 6324, DN , PN 25
Regelventile Control valves Robinet à soupape
5200-7010 aureihe / Series / Séries MV 5200 / PV 6200 Motorventile für die Drosselung, Mischung und Verteilung flüssiger und gasförmiger Medien Nennweite DN 15...100, Nenndruck PN 16...40 Durchgangs- und
More informationSTEVI 450 / way control valve in mixing and diverting design DN
STEVI 450 / 451 with electric and pneumatic actuators 3-way control valve in mixing and diverting design DN 15-150 STEVI 450 / 451 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel
More informationSTEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
More information3-way control valve in mixing and diverting design
with electric and pneumatic actuators 3-way control valve in mixing and diverting design 1/2-6 STEVI 450 / 451 Electric actuator Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices
More informationARI-STEVI 423 / 463 Pneumatic actuator ARI-DP 34-34T. Electric actuator ARI-PREMIO 5-25 kn ARI-PREMIO-Plus 2G 5-25 kn
ARI-STEVI 423 / 463 (DN200-300) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP
More informationControl valves with pneumatic actuators up to 350 C PN
300 540 1080 2 Features Suitable in building and process engineering for various mediums 0...+200 C Suitable with stuffing box extension or stem seal with stainless steel bellow to 10...+350 C and for
More informationwith electric and pneumatic actuators Control valve in 3-way-form (3-way mixing valve) DN 300 ARI-STEVI 423 Electric actuator ARI-PREMIO
with electric and pneumatic actuators Control valve in 3-way-form (3-way mixing valve) DN 300 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches Handwheel Additional devices available, e.g.
More informationARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T Reversible pneumatic actuator
More informationSTEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
More informationSeries 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244
Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244 Application Versatile control valves with globe or three-way valve
More informationARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
More informationARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T. Electric actuator ARI-PREMIO 2,2-25 kn ARI-PREMIO-Plus 2G 2,2-25 kn
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
More informationControl valve - 3-way with flanges (3-way mixing valve / 3-way diverting valve) DN 200 and 250
with electric and pneumatic actuators Control valve - 3-way with flanges (3-way mixing valve / 3-way diverting valve) DN 200 and 250 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches Handwheel
More informationwith electric and pneumatic actuators Control valve straight through with V-port plug DN ARI-STEVI 425 / 426
with electric and pneumatic actuators Control valve straight through with V-port plug DN 300-500 ARI-STEVI 425 / 426 Electric actuator AUMA SAR with LE Electric multiturn actuator capable of high closing
More informationARI-STEVI 423 / 463 (DN ) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators ARI-STEVI 423 / 463 (DN200-300) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP
More informationARI-STEVI 440 / 441 DVGW type approval
ARI-STEVI 440 / 441 DVGW type approval Control valve in straightway form for combustible gases DIN-DVGW type approval DN 15-100 ARI-STEVI 440-G / 441-G for electric and pneumatic actuators DIN-DVGW type
More informationARI-STEVI 423 / 463 Pneumatic actuator ARI-DP 34-34T. Electric actuator ARI-PREMIO 5-25 kn ARI-PREMIO-Plus 2G 5-25 kn
Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP 34-34T Reversible pneumatic actuator
More informationARI-STEVI 448 / 449 (DN15-100) Control valve in straightway form with screwed seat ring With pneumatic and electric actuators
ARI-STEVI 8 / 9 (DN5-00) Control valve in straightway form with screwed seat ring With pneumatic and electric actuators ARI-STEVI 8 / 9 Pneumatic actuator ARI-DP 30-3 Reversible pneumatic actuator Actuator
More informationPN63 - PN160. with electric and pneumatic actuators. Control valve in straightway form with flanges and butt weld ends (shoed ends) DN
with electric and pneumatic actuators Control valve in straightway form with flanges and butt weld ends (shoed ends) DN 15-100 PN63 - PN160 ARI-STEVI 472 Electric actuator ARI-PREMIO Enclosure IP 65 2
More informationMaße / Dimensions 3-teiliger Kugelhahn Serie DG1 3-pce ball valve series DG1 DN 8 - DN 50 voller Durchgang / full bore
DN 8 - DN 50 voller Durchgang / full bore Antriebsanschluss nach DIN 3337 / ISO 5211 - siehe Datenblatt Antriebsanschluss Mounting plate acc. to DIN 3337 / ISO 5211 - see data sheet mounting plate DN NPS
More informationwith electric actuators Feedwater control valve with pump spill back DN
ARI-STEVI 453 with electric actuators Feedwater control valve with pump spill back DN 25-100 ARI-STEVI 453 Electric actuator ARI-PREMIO 2,2-15 kn ARI-PREMIO-Plus 2G 2,2-15 kn Enclosure IP 65 2 torque switches
More informationwith electric and pneumatic actuators Stop valve in straightway form DN ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE
with electric and pneumatic actuators Stop valve in straightway form DN 300-500 ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE Electric multiturn actuator capable of high closing pressures Enclosure
More informationPN63 - PN160. ARI-STOBU PN Stuffing box valve. Stop valve with gland seal - metallic sealing. ARI-STOBU - Straight through with flanges
Stuffing box valve Stop valve with gland seal - metallic sealing ARI-STOBU - Straight through with flanges PN63 - PN160 Forged steel High temperature steel Fig. 006 Seite 2 ARI-STOBU - Straight through
More informationBalanced and Multi-stage Trim Options for SPIRA-TROL Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationARI-STEVI ANSI (NPS 1/2" - 2") with electric and pneumatic actuators Control valve in straightway form
with electric and pneumatic actuators Control valve in straightway form ARI-STEVI 440 - ANSI Pneumatic actuator ARI-DP 32-33 Reversible pneumatic actuator Actuator with rolling diaphragm Air supply pressure
More informationBalanced and Multi-stage Trim Options for SPIRA-TROL Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationBalanced and Multi-stage Trim Options for Spira-trol TM Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationARI-STEVI 470 / 471 (DN15-150)
With pneumatic and electric actuators ARI-STEVI 470 / 47 (DN5-50) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 47 Pneumatic actuator
More informationARI-STEVI 470 / ANSI (DN25-200)
With pneumatic and electric actuators Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 471 - ANSI Pneumatic actuator ARI-DP 32-35 Reversible
More informationSeries 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
More informationCompany Standard Mounting Instructions for Type Valves with Type AT Actuator
Mounting Instructions for Type 72 82-62 Valves with Type AT Actuator Introduction These installation instructions contain important information on the installation, functioning, maintenance and storage
More informationPressure reducing valve Pressure reducing valve in straightway form DN
Pressure reducing valve Pressure reducing valve in straightway form DN 15-150 ARI-PREDU Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Grey cast
More informationType 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
More informationARI-Strainer PN63-160
ARI-Strainer PN63-160 ARI-Strainer - Screen of stainless steel DN 10-100 ARI-Strainer - Straight through with flanges TRB 801 Annex II No. 45 Cast steel Forged steel High temp. Steel Fig. 050 Page 2 +
More informationARI-STEVI BBD 415 (DN25-50) Straight through blow down valve
With pneumatic actuator ARI-STEVI BBD 415 (DN25-50) Straight through blow down valve ARI-STEVI BBD 415 Pneumatic actuator Required air supply pressure max. 6 bar Options: - Assembly of additional devices
More informationExcess pressure regulator Excess pressure regulator, straight through DN
ARI-PREDEX Excess pressure regulator Excess pressure regulator, straight through DN 15-150 ARI-PREDEX Excess pressure regulator, straight through with diaphragm actuator UDA Actuator with rolling diaphragm
More informationARI-STEVI 470 / ANSI (DN25-200)
ARI-STEVI 470 / 471 - ANSI (DN25-200) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem With pneumatic and electric actuators ARI-STEVI 470 / 471 - ANSI
More informationSpira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationNORI 320 Globe valves PN DN Application Standard variants Operating data Materials Remarks Design
Type series booklet 7653.1/8-10 NORI 320 Globe valves with gland packing with non-turning stem flanged or butt-weld ends ZXLF ZXSF PN 250-320 DN 65-200 Application In industrial plants, power stations,
More informationEvery component precisely matched
Series 200 Every component precisely matched Powerful valve actuator 1 Most commonly used is the electric actuator series SHE as shown here. It is robust, provides a constant seating force and is cost
More informationARI-STEVI H / with electric actuators
Control valve in 3-way-/straightway form in compact-design for HVAC Applications - Fig. 491 / Fig. 492 Control valve in 3-way-/straightway form for HVAC Applications - Fig. 485/487 / Fig. 486/488 ARI-STEVI
More informationSeries 2003 / Three-way control valve. Features. Wörth am Main
Series 2003 / 2013 Three-way control valve SPECIFICATION The Series 2003 / 2013 comprises a range of skirt guided Three-way mixing (2003) and diverting valves (2013). Available in a variety of sizes, they
More informationseamless, multiple layers, made of , option: Hastelloy and other materials Heating jacket (option)
General Data Series 6H Nominal Size / NPS (15) 25 / (1/2 ) 1 Nominal Pressure PN / ANSI 63250 / Class 6000 Characteristic equal perc. or Rangeability 40:1 Plug guide stem guided, option: double guided
More informationARI-STEVI 470 / 471 (DN15-150)
With pneumatic and electric actuators ARI-STEVI 470 / 471 (DN15-150) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 471 Pneumatic
More informationHigh-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN , DN , T max : 550 C
High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN 63-160, DN 50 150, T max : 550 C Shut-off globe valve (series V30) or shut-off globe valve with control
More informationCE43 1" (DN25) to 4" (DN100) Carbon Steel Cage Design, Two Port Control Valves
Globe 13 CE43 1" (DN25) to 4" (DN) Carbon Steel Cage Design, Two Port Description The CE43 series is a range of carbon steel two port, cage trim, control valves conforming to ANSI B16.34, ASME VIII standards
More informationPneumatic Butterfly Valve Type 3335 / AT
Pneumatic Butterfly Valve Type 3335 / AT Application Tight closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN 10 and PN
More informationType 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.
Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing
More informationYour contact person Mr Tim Snyder. Technical Data
Inclusive adapter DIN M10 30 to connect to felxible shafts Inclusive rebuild set to G 16000 H Powerful machine with centrifugal governor extensions up to 1000 mm Your contact person Mr Tim Snyder 586-776-1480
More informationGeneral Stem-Guided Control Valves
Control and Shut-Off Valves Variety of Trim Designs in Different Materials Electric and Pneumatic Actuators as Standard General Stem-Guided Control Valves Sizes ½" - 12" (15mm - 300mm) ANSI Class 150-900
More informationGeneral Stem-Guided Control Valves
Control and Shut-Off Valves Variety of Trim Designs in Different Materials Electric and Pneumatic Actuators as Standard General Stem-Guided Control Valves Sizes ½" - 12" (15mm - 300mm) ANSI Class 150-900
More informationControl Valve 23 / 24 Single-seat straight-way valve with exchangeable seat ring
Change from one to two columns Data Sheet 10/138.29EN Rev. B Control Valve 23 / 24 Singleseat straightway valve with exchangeable seat ring Size DN 15... DN 100 With pneumatic actuator Verschiedene Gehäusewerkstoffe
More informationSEMPELL. All applications of stop valves up to a Nominal Diameter of 50 mm. VA 500 Serie high-pressure Stop Valves DIN
DIN SEMPELL All applications of stop valves up to a Nominal Diameter of 50 mm. Features Bonnetless die-forged body. One piece body design with packing only. Stellited seat. Stem nut drive sealed against
More informationTemperature regulator Temperature regulator DN
Temperature regulator Temperature regulator DN 15-100 Fig. 771 ARI-TEMPTROL Thermal closing valve straight through with flanges Fig. 771 Fig. 772 Page 2 Fig. 773 ARI-TEMPTROL LCG Thermal closing valve
More informationQLM and QLD Series DN125 to DN200 Three Port Control Valves
3.63.27.22 3900/1 IM-P39-1 CH Issue 1 QLM and QLD Series DN12 to DN200 Three Port Control Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation
More informationCast iron Nodular iron BR 006/306 Page 2. Cast steel BR 006/306 Page 2. Forged steel BR 006 Page 3. Stainless steel BR 006 Page 3
ARI-STOBU - Stop valve with gland seal STOBU Stop valve with gland seal ARI-STOBU Globe valve with flanges TRB 801 No.45 (without GG-25) Cast iron Nodular iron BR 006/306 Page 2 ARI-STOBU Globe valve with
More informationSeries 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size DN 15 to 300 Nominal pressure
More informationSeries 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244
Series 240 Pneumatic Control Valves Type 3244-1 and Type 3244-7 Three-way Valve Type 3244 DIN and ANSI versions Applications Mixing or flow-diverting valves for use in process engineering and industrial
More information5750 DONAHUE STREET, MONTREAL, QUEBEC. H4S 1C1 TEL.: , FAX:
5750 DONAHUE STREET, MONTREAL, QUEBEC. H4S 1C1 TEL.: 514-336-3820, 800-390-0140 FAX: 514-745-1764 www.airtekltd.com E-MAIL info@airtekltd.com KJ 45S/A 1 713291 1 Head M10 Tête M10 2 71C00281 1 Screw TCEI
More informationErsatzteilliste Spare Parts List Liste des pièces de rechange K K 355 *UL
Ersatzteilliste Spare Parts List Liste des pièces de rechange 1.786-680.0 *UL www.karcher.com 5.952-856.0 1.0 EINZELTEILE 1.0 PIECE PARTS 1.0 PIECES CONSTITUANTES A1 GRUPPE: 1.0 EINZELTEILE 1.0 PIECE PARTS
More informationSKU: DR4306. Fixed Orifice Double Regulating Valve
SKU: DR4306 VOLT Fixed Orifice Double Regulating Valve 1/2" - 2" Brass Double Regulating Valve with Test Points 1/2" - 2" Messing Doppelregelventilmit Testpunkte 1/2" - 2" Latón Doble Válvula reguladora
More informationSPIRA-TROL 1/2" to 4" ANSI Two-port LEA, LFA and LLA Control Valves
1/2" to 4" ANSI Two-port LEA, LFA and LLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
More information14 Rückschlagklappen. Swing check valves Clapet de non retour
02 01 14 Rückschlagklappen Swing check valves Clapet de non retour 99 17 16 15 14 13 12 03 04 11 10 09 08 07 06 05 Rückschlagklappen - Swing check valbe - Clapet de non-retour 14.01Rückschlagklappe F6
More informationSPIRA-TROL. DN15 to DN50. LE, LF and LL Two-port Control Valves
Page 1 of 10 Cert. No. LRQ 0963008 ISO 9001 SPIR-TROL DN15 to DN100 LE, LF and LL Two-port Control Valves TI-P303-11 CH Issue 2 Description SPIR-TROL is a range of two-port single seat globe valves with
More informationValve Series V2001 Three-way Valve Type 3323
Valve Series V2001 Three-way Valve Type 3323 Fig. 1 Type 3323 Valve with mounted rod-type yoke (partial view) Edition January 1999 Mounting and operating instructions E 8113/8114 EN 1. Design and principle
More information76.116/1. BUE: Flanged three-way valves, PN 16/10. Sauter Components
76.116/1 BUE: Flanged three-way valves, PN 16/10 How energy efficiency is improved Accurate control with high reliability. Areas of application Continuous control of cold/hot water, air and low-pressure
More informationSeries 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
More informationType 1a Globe Control Valve
PTFE-lined Type 1a Globe Control Valve Application: PTFE-lined control valve for corrosive media, particularly for severe requirements in chemical applications: Valve sizes DN 25 to 150 or NPS 1 to 6 Pressure
More informationrev 1_ MH-246.4DS
rev 1_02-10-15 MH-246.4DS 1 Shaft, Handle, Cutting Attachment 16 9 7 1 8 6 38 11 15 10 3 2 218 4 37 2 1 Shaft, Handle, Cutting Attachment 1 1 660195626 LOOP HANDLE SET POIGNÉE CPL. 1 INC. 6-9,16 1 2 326036-4
More informationFlowPak TM General Application Valve DN , PN 10 / 40
FlowPak TM General Application Valve DN 15 -, PN / SCHERR Application Control of gases, vapours and liquids. The modular concept of valve, multi spring actuator and our standard Positioner facililates
More informationType 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
More informationSelf-operated Pressure Regulators Type Universal Pressure Reducing Valve
Self-operated Pressure Regulators Type 41-23 Universal Pressure Reducing Valve ANSI version Application Pressure regulators for set points from 0.75 to 400 psi (0.05 to 28 bar) Valves in NPS ½ to 4 (DN
More informationVALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
More informationQLM and QLD Series DN15 to DN100 Three Port Control Valves
3.563.575.01 3590050/3 IM-P359-01 CH Issue 3 QLM and QLD Series DN15 to DN100 Three Port Control Valves Installation and Maintenance Instructions 1. Safety information. General product information 3. Installation
More informationDIN Aseptik Klemmverbindung DIN Aseptic Clamp Union
Datenblatt Datasheet DIN11864-3 Aseptik Klemmverbindung DIN11864 3 Aseptic Clamp Union liquitec AG Industrie Neuhof 54 CH-3422 Kirchberg T +41 55 450 83 00 F +41 55 450 83 01 info@liquitec.ch www.liquitec.ch
More informationDatenblatt Flüssigkeitsringpumpe Data sheet liquidring pump
Datenblatt Flüssigkeitsringpumpe Data sheet liquidring pump Serie Series L-BV5 L_300 Flüssigkeitsringpumpen Liquid ring pumps 3 AC; 50/60 Hz 3 AC; 50/60 Hz Vakuumbetrieb Vacuum operation Typen Types 2BV5
More informationKP-28 & KT-28 Two Way Control Valve
CRN-CANADA PASCO KP-28 & KT-28 Two Way Control Valve Fluid Control For Sustainable Future Features 1. Modulating and open/close functions with electric or pneumatic actuators and others for selection.
More informationSPIRA-TROL 1/2" to 4" ANSI Two-port KEA, KFA and KLA Control Valves
1/2" to 4" ANSI Two-port KEA, KFA and KLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
More informationARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges EN ISO
More informationARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges EN ISO
More informationSeries 14b - Type HD
High-Performance Control and Shut-off Butterfly Valve Series 14b - Type HD Application: Tight-closing, double-eccentric butterfl y valve especially for high requirements in the chemical industry, for example
More informationEvery component precisely matched
Series 8B Every component precisely matched Powerful valve actuator Most commonly used is the pneumatic multi-spring actuator series MA as shown here. It is robust, ex-proof, features low actuating times,
More informationSi 6303 / Si 6304 / Si 6305
Si 6303 / Si 6304 / Si 6305 Engineering GREAT Solutions Process and steam safety valves to PED and DIN/EN standards Si 6303 / Si 6304 / Si 6305 Si 6303 / Si 6304 / Si 6305 Features Engineered for high
More information)D]RQVNLNRPDGL]DãWLüHQLVXVDHSRNVLERMRPLOLHSRNVLSUDãNRPSODVWLILFLUDQMH Bušenje
Primjena )D]RQVNLNRPDGLXSRWUHEOMDYDMXVH]DVSDMDQMHSODVWLþQLK39&',1XFLMHYRYRGQLPVLVWHPLPD]DYRGXLQHXWUDOQH medije Radni tlak 10bara Dozvoljeni radni tlak 16 bara maks. Radna temperatrua 70ºC maks. MATERIJAL
More informationSeries 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size 15 to 300 Nominal pressure
More informationSeries W&T Pneumatic Control Valve Type RVG Globe valve and angle valve
Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve Application Control valve for feedwater and steam applications in power plant engineering and the petrochemical industry Nominal
More informationPNEUMATIC ACTUATED GLOBE VALVES TORK LV 3000 SERIES
fluid fluid under under control PNEUMATIC ACTUATED GLOBE VALVES TORK LV 3000 SERIES TORK LV 3000 SERIES SO RELIABLE YOU COULD FORGET WHERE, WHEN, HOW IT WORKS. TORK LV 3000 SERIES A NEW CONTROL VALVE
More informationType 455, 456. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 455, 456 Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 468.08-E 462.01-D 40 Cap H2 19 Lock nut 18 Adjusting screw 16 Upper spring plate 9 Bonnet 12 Spindle 54
More informationSeries 250 Pneumatic Control Valve Type and Type High Pressure Valve Type 3252
Series 250 Pneumatic Control Valve Type 3252-1 and Type 3252-7 High Pressure Valve Type 3252 Application Control valve used control small flow rates in process engineering Nominal size G 1 2 1 NPT 1 2
More informationYour contact person Mr Tim Snyder. Technical Data
Comfortable use by a safety valve embedded into the hand grip Ideally for internal grinding, deburring of hollow spaces (e.g. motor blocks, tubes, turbine blades) and for finishing welding lines Robust
More informationTriple Eccentric Control and Shut-off Butterfly Valve Series 14t
Application: Triple Eccentric Control and Shut-off Butterfly Valve Series 14t Triple eccentric butterfly valve providing excellent shut-off in all industrial applications: Nominal size DN 80 to DN 400
More informationSPIRA-TROL. ½" to 4" ASME (ANSI) Two-port KEA, KFA and KLA Control Valves
Page 1 of 11 MNGMNT SYSTMS TI-P375-1 Issue 3 SPIR-TROL ISO 91 ½" to 4" SM (NSI) Two-port K, KF and KL ontrol Valves ert. No. LRQ 9638 Description SPIR-TROL is a range of two-port single seat globe valves
More informationUNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
More informationVanne à manchon pneumatique Série VMC Air operated Pinch Valve of VMC Series
New! Vanne à manchon pneumatique Série VMC Air operated Pinch Valve of VMC Series Raccord à bride / Flange Filetage intérieur / Internal Thread Raccord clamp / Tri-Clamp Raccord à souder / Weld-on ends
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
More informationAPL 100 Spare parts list Liste des pièces de rechange
APL 100 Spare parts list Liste des pièces de rechange 71.52.995 2 / 25 71.52.995 3 / 25 71.52.995 4 / 25 71.52.995 1 Distance bolt M4x15 Entretoise M4x15 12.40.415 2 2 Mounting base self-adhesive 19x19
More informationGate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN DN
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN 10-100 DN 50-150 Admissible operating pressure [bar] at design temperature [ C] Material PN -60-10 20 100 150 200 250 300 350 400 410 420 430 440 450 460
More informationEngineering Capabilities Industry Experience Certification & Approvals Typical Applications Global Operations Markets & Applications
Fluid Handling Solutions: Automatic Control Valves Technical Documentation CLA-VAL 81-01 Engineering Capabilities Industry Experience Certification & Approvals Typical Applications Global Operations Markets
More informationMaintenance-free metallic seat shut-off globe valves
Type leaflet 7150.1/5-10 BOA R -H Maintenance-free metallic seat shut-off globe valves with bellows flanged to new European standard 1092-2 type 21 Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16
More informationMaintenance-free metal-seated globe valves. Grey cast iron PN 16 DN Nodular cast iron PN 16 DN Nodular cast iron PN 25 DN
Type Series Booklet 7150.1/9-10 BOA -H Maintenance-free metal-seated globe valves with bellows Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16 DN 15-350 Nodular cast iron PN 25 DN 15-150 Applications
More information