Product Catalogue November 2017

Transcription

1 Product Catalogue November 207 Manual and Actuated Valves It s all at Albion

2

3 Contents Brass 4 Ball Valves Way Valves Check Valves Gate Valves Strainers Press Valves 9 Ball Valves Check Valves Strainer O Balancing Valve DRV DZR Brass 0 Ball Valves Gate Valves Bronze 2 Globe Valves Gate Valves Check Valves Ball Valves Strainers Stainless Steel 4 Ball Valves Way Valves Globe Valves Check Valves Gate Valves Strainers Cast Iron 9 Ball Valves Butterfly Valves Check Valves Gate Valves Strainers Globe Valves Hydronic Balancing & Controls 2 PICV DPCV Monolink Metering Stations Commissioning Sets port Rotary Mixing/Diverting 2/ port Zone and Control Pressure Control Valves 29 Pressure Reducing Valves Pressure Relief Valve Safety Valve Standard Discharge High Discharge Plastic 2 Ball Valves Way Valves Butterfly Valves Check Valves Diaphragm Valves Solenoid Valves 4 Pilot Operated Direct Acting High Temperature Namur Gas Solenoid Knife Gate Valves 9 Cast Iron Stainless Steel Actuated lexible Connectors 40 Screwed langed Tied Radiator Valves 42 Angle Reverse Angle Straight Pre-setting Lockshield TRV Remote Sensor Remote Adjuster Actuated Valves 45 Ball Valves Way Valves Namur Solenoid Valves Butterfly Valves Plastic Valves Switch Boxes Technical Information 54 Pressure & Temperature Options Branding Certificates

4 Brass Valves EN GAS APPROVED ART 45P 2 Piece Brass Ball Valve BSP Parallel / Ends (ISO 228/) ull Bore 40 Bar Rated ( /4" - ") 2 Bar Rated ( /4" - 2") 6 Bar Rated (2 /2" - 4") -20 C to +50 C ( /4-2") -0 C to +0 C (2 /2-4") WRAS +EN Gas Approved /8" /4" " /4" /2" 2" 2 " 4" Handle options: Tee Handle - Yellow Lever - Yellow, Red + Blue EN GAS APPROVED ART 45T 2 Piece Brass Ball Valve BSP Taper / Ends (ISO 7/) ull Bore 40 Bar Rated ( /4 - ") 2 Bar Rated ( /4-2") 25 Bar Rated (2 /2-4") -20 C to +50 C WRAS +EN Gas Approved /8" /4" " /4" /2" 2" 2 " 4" Handle options: Tee Handle - Yellow Lever - Yellow, Red + Blue ART 45 NPT 2 Piece Brass Ball Valve NPT / Ends (ANSI B.20.) ull Bore 40 Bar Rated (¼ - ") 2 Bar Rated (¼ - 2") 25 Bar Rated (2½ - 4") -20 C to +50 C /8" /4" " /4" /2" 2" 2 " 4" ART 46 2 Piece Brass Ball Valve BSP Parallel M/ Ends (ISO 228/) ull Bore 40 Bar Rated (¼ - ") 2 Bar Rated (¼ - 2") -20 C to +50 C WRAS Approved /8" /4" " /4" /2" 2" ART 47 2 Piece Brass Ball Valve BSP Parallel M/M Ends (ISO 228/) ull Bore 40 Bar Rated -20 C to +50 C WRAS Approved /8" /4" "

5 Brass Valves EN GAS APPROVED ART 40P 2 Piece Brass Ball Valve BSP Parallel / Ends (ISO 228/) ull Bore 40 Bar Rated ( /4-2") 25 Bar Rated (2 /2-4") -20 C to +0 C /8" /4" " /4" /2" 2" 2 " 4" Handle options: Tee Handle - Yellow, Red + Blue Lever - Yellow ( /4" to 4") Lever - Red + Blue ( /2" to 2") EN GAS APPROVED ART 40T 2 Piece Brass Ball Valve BSP Taper / Ends (ISO 7/) ull Bore 40 Bar Rated ( /4-2") 25 Bar Rated (2 /2-4") -20 C to +0 C /8" /4" " /4" /2" 2" 2 " 4" Handle options: Tee Handle - Yellow, Red + Blue Lever - Yellow ART 40NPT 2 Piece Brass Ball Valve NPT / Ends (ANSI B.20.) ull Bore 40 Bar Rated ( /4-2") 25 Bar Rated (2 /2-4") -20 C to +0 C /8" /4" " /4" /2" 2" 2 " 4" Handle options: Tee Handle - Yellow, Red + Blue Lever - Black/Yellow ART 54 2 Piece Brass Ball Valve BSP Parallel / Ends (ISO 228/) ull Bore 2 Bar Rated ( /4 - ") 25 Bar Rated ( /4-2") 6 Bar Rated (2 /2-4") -5 C to +0 C WRAS Approved /8" /4" " /4" /2" 2" 2 " 4" Handle options: Lever - Red + Blue EN GAS APPROVED ART 89 Brass Ball Valve Compression Ends ull Bore 25 Bar Rated -0 C to +0 C WRAS Approved EN Gas Approved 5mm 22mm 28mm 5mm 42mm 54mm Handle options: Tee Handle - Yellow, Red + Blue Lever - Yellow, Red + Blue 5

6 Brass Valves ART 60 Brass Ball Valve BSP Parallel / Ends (ISO 228/) ull Bore 40 Bar Rated ( /4 - ") 2 Bar Rated ( /4") 0 Bar Rated ( /2-2 /2") 25 Bar Rated (") ISO Direct Mount -20 C to +20 C /8" /4" " /4" /2" 2" 2 " ART 70/7 Way L & T Port Brass Ball Valve BSP Parallel emale Ends (ISO 228/) Reduced Bore 2 Bar Rated ( /4 - ") 25 Bar Rated ( /4-2") -20 C to +50 C /8" /4" " /4" /2" 2" ART 87/88 Way T & L Port Brass Ball Valve BSP Parallel emale Ends (ISO 228/) 0 Bar Rated ( /4 - /4") 20 Bar Rated ( - /4") 6 Bar Rated ( /2-2") PTE Seals ISO Direct Mount -20 C to +20 C /8" /4" " /4" /2" 2" ART 75 Brass Gate Valve BS 554 Approved BSP Taper / Ends (ISO 7/) 25 Bar Rated -0 C to +86 C Kite Marked KM 5579 /8" /4" " /4" /2" 2" 2 " 4" ART 60 Brass Gate Valve Conforms to BS 554 BSP Taper / Ends (ISO 7/) 20 Bar Rated -0 C to +80 C /4" " /4" /2" 2" 2 " 4"

7 Brass Valves ART 6 Brass Gate Valve BSP Parallel / Ends 6 Bar Rated -0 C to +0 C /4" " /4" ART 65 Brass Gate Valve Conforms to BS 554 Compression Ends 6 Bar Rated -0 C to +0 C 5mm 22mm 28mm 5mm 42mm 54mm ART 84M/84R Brass Swing Check Valve BSP Parallel / Ends (ISO 228/) 20 Bar Rated Metal Seat 0 C to +20 C 84R Rubber Seat 0 C to +00 C /4" " /4" /2" 2" 2 " 4" ART 66 Brass Spring Check Valve BSP Parallel / Ends (ISO 228/) 20 Bar Rated lat Metal Disc 0 C to +00 C /8" /4" " /4" /2" 2" 2 " 4" ART 98 Stainless Steel Mesh ilter BSP Parallel Male End 6 Bar Rated 0 C to +0 C /8" /4" " /4" /2" 2" 2 " 4"

8 Brass Valves ART 68 Brass Y Type Strainer BSP Parallel / Ends (ISO 228/) 20 Bar Rated 0 C to +50 C Stainless Steel Screen /4" " /4" /2" 2" 2 " 4" ART 60 Automatic Air Vent BSP Parallel Male End Body Brass CW67N Nickel Plated 0 Bar Rated +5 C to +0 C /8" /2" 6 6 ART 257 / ART 257C Locking Device To Suit Art 45, 40, 50, 59 & 89 Series Consult Brass Product Information Book for more details /8" /4" " /4" /2" 2" C ART 97 Thermal Extension To Suit Art 45 Series Consult Brass Product Information Book for more details /8" /4" " /4" /2" 2" 2 " 4" M M A A 2A 2A A A * * * * Refer to Sales Office ART 97C Thermal Extension To Suit Art 40, 50, Series Consult Brass Product Information Book for more details /4" " /4" /2" 2" B B 2B B B 4B 8

9 Press Valves ART 55 PRS PN6 DZR Brass Ball Valve ull Bore 6 Bar Rated -20 C to +40 C Universal M + V Press 5mm to 5mm Dedicated M + V Profiles 42mm and 54mm Thermal extension available on request 5mm 22mm 28mm 5mm 42mm 54mm ART 25 PRS DZR Brass ixed Orifice Regulating Valve (ODRV) 25 Bar Rated -0 C to +20 C M Press Ends EPDM Seat 5 Year Guarantee 5mm 22mm 28mm 5mm 42mm 54mm ART 26 PRS DZR Brass Double Regulating Valve (DRV) 20 Bar Rated -0 C to +20 C 'M' Press Ends EPDM Seat 5mm 8mm 22mm 28mm 5mm 42mm 54mm ART 94 PRS PN6 Brass Swing Check Valve 6 Bar Rated -0 C to +50 C M Press Ends EPDM Seat 5mm 22mm 28mm 5mm 42mm 54mm ART 98 PRS PN20 DZR Brass Y Type Strainer 20 Bar Rated -0 C to +50 C M Press Ends EPDM Seat 5mm 22mm 28mm 5mm 42mm 54mm

10 DZR Brass Valves ART 640HW PN20 DZR Brass Gate Valve Conforms to BS554 BSP Taper / Ends (ISO 7/) 20 Bar Rated -0 C to +80 C /4" " /4" /2" 2" ART 640LS PN20 DZR Brass Gate Valve Conforms to BS554 BSP Taper / Ends Lockshield (ISO 7/) 20 Bar Rated -0 C to +80 C /4" " /4" /2" 2" ART 50 2 Piece DZR Brass Ball Valve BSP Taper / Ends (ISO 7/) ull Bore 40 Bar Rated -20 C to +0 C WRAS Approved /8" /4" " /4" /2" 2" Handle options: Tee Handle - Yellow, Red + Blue ART 59 DZR Brass Ball Valve Compression Ends ull Bore 25 Bar Rated -0 C to +0 C WRAS Approved 5mm 22mm 28mm 5mm 42mm 54mm Handle options: Tee Handle - Yellow, Red + Blue ART 55 PRS PN6 DZR Brass Ball Valve ull Bore 6 Bar Rated -20 C to +40 C Universal M + V Press 5mm to 5mm Dedicated M + V Profiles 42mm and 54mm Thermal extension available on request 5mm 22mm 28mm 5mm 42mm 54mm

11 DZR Brass Valves Coming 208 ART 6 DZR Brass Double Check Valve BSP Parallel / Ends (ISO 228/) 6 Bar Rated -0 C to +85 C WRAS Approved Conforms with EN959 /4" " /4" /2" 2" Coming 208 ART 7 640LS DZR Brass Double Check Valve Compression Ends 6 Bar Rated -0 C to +85 C WRAS Approved Conforms with EN959 5mm 22mm 28mm

12 Bronze Valves ART 45 2 Piece Bronze Ball Valve BSP Taper / Ends (ISO 7/) ull Bore 40 Bar Rated -0 C to +40 C /4" " /4" /2" 2" ART 75HW Bronze Gate Valve Conforms to BS 554 BSP Taper / Ends Handwheel Op (ISO 7/) 20 Bar Rated -0 C to +80 C WRAS Approved /4" " /4" /2" 2" ART 75LS Bronze Gate Valve Conforms to BS 554 BSP Taper / Ends Lockshield (ISO 7/) 20 Bar Rated -0 C to +80 C WRAS Approved /4" " /4" /2" 2" ART 50 Bronze Globe Valve Conforms to BS 554 BSP Taper / Ends (ISO 7/) 2 Bar Rated -0 C to +98 C Renewable PTE Seat /4" " /4" /2" 2" ART 84 Bronze Swing Check Valve BSP Taper / Ends (ISO 7/) 20 Bar Rated -0 C to +80 C Metal Seat /4" " /4" /2" 2"

13 Bronze Valves ART 68 Bronze Y Type Strainer BSP Taper / Ends (ISO 7/) 20 Bar Rated -0 C to +80 C Stainless Steel Screen 0.75mm /4" " /4" /2" 2" ART 80 Bronze Lift Check Valve BSP Parallel / Ends (ISO 228/) 20 Bar Rated (/8-2") 6 Bar Rated (2½ - 4") -0 C to +80 C (/8-2") -0 C to 70 C (2½ - 4") PTE Seat /8" /4" " /4" /2" 2" 2 " 4" ART 5 langed Bronze Gate Valve Drilled PN6 (Undrilled on request) 6 Bar Rated (½ - 4") 0 Bar Rated (5-6") -0 C to +70 C (½ - 4") -0 C to 50 C (5-6") /4" " /4" /2" 2" 2 " 4" 5" 6" ART 90 langed Bronze Globe Valve Drilled PN6 (Undrilled on request) 6 Bar Rated -0 C to +70 C PTE Seat /4" " /4" /2" 2" 2 " 4" ART 60 langed Bronze Lift Check Valve Drilled PN6 (Undrilled on request) 6 Bar Rated -0 C to +70 C PTE Seat /4" " /4" /2" 2" 2 " 4"

14 Stainless Steel Valves ART 90L Piece Stainless Steel Ball Valve BSP Taper / Ends (ISO 7/) Reduced Bore 69 Bar Rated ( /4 - /4") 55 Bar Rated ( /2-2") -25 C to +200 C PTE Seals Locking Lever /8" /4" " /4" /2" 2" ART Piece Stainless Steel Ball Valve BSP Taper / Ends (ISO 7/) ull Bore 82 Bar Rated ( /4 - ") 69 Bar Rated ( /4 - /2") 62 Bar Rated (2 - ") -25 C to +200 C PTE Seals Locking Lever /8" /4" " /4" /2" 2" 2 " ART 902P 2 Piece Stainless Steel Ball Valve BSP Parallel / Ends (ISO 7/) ull Bore 82 Bar Rated ( /4 - ") 69 Bar Rated ( /4 - /2") 62 Bar Rated (2") -25 C to +200 C PTE Seals Locking Lever /8" /4" " /4" /2" 2" ART 902NPT 2 Piece Stainless Steel Ball Valve NPT / Ends (ANSI B.20.) ull Bore 82 Bar Rated ( /4 - ") 69 Bar Rated ( /4 - /2") 62 Bar Rated (2") -25 C to +200 C PTE Seals Locking Lever /8" /4" " /4" /2" 2" NEW ART 92P 2 Piece Stainless Steel Ball Valve BSP Parallel / Ends (ISO 7/) ull Bore 40 Bar Rated -25 C to +200 C PTE Seals Locking Device /8" /4" " /4" /2" 2"

15 Stainless Steel Valves NEW ART 92NPT 2 Piece Stainless Steel Ball Valve NPT / Ends (ANSI B.20.) ull Bore 40 Bar Rated -25 C to +200 C PTE Seals Locking Device /8" /4" " /4" /2" 2" ART 90 Piece Stainless Steel Ball Valve BSP Taper / Ends (ISO 7/) ull Bore 82 Bar Rated ( /4 - ") 69 Bar Rated ( /4 - /2") 62 Bar Rated (2 - ") -25 C to +200 C PTE Seals Locking Lever /8" /4" " /4" /2" 2" 2 " ART 90 SW Piece Stainless Steel Ball Valve Socket Weld Ends ull Bore 82 Bar Rated ( /4 - ") 69 Bar Rated ( /4 - /2") 62 Bar Rated (2 - ") -25 C to +200 C PTE Seals Locking Lever /8" /4" " /4" /2" 2" 2 " NEW ART 995T Piece Stainless Steel ire Safe Ball Valve BSP Taper / Ends (ISO 7/) ull Bore 40 Bar Rated -25 C to +200 C PTE Seals Anti Static Device ISO Direct Mount TUV Certified to API STD 607 Locking Device /4" " /4" /2" 2" 2 " 4" NEW ART 995NPT Piece Stainless Steel ire Safe Ball Valve NPT / Ends (ANSI B.20.) ull Bore 40 Bar Rated -25 C to +200 C PTE Seals Anti Static Device ISO Direct Mount TUV Certified to API STD 607 Locking Device /4" " /4" /2" 2" 2 " 4"

16 Stainless Steel Valves ART 80 Piece Carbon Steel Ball Valve BSP Taper / Ends (ISO 7/) ull Bore 82 Bar Rated ( /4 - ") 69 Bar Rated ( /4 - /2") 62 Bar Rated (2 - ") -25 C to +200 C PTE Seals Locking Lever /8" /4" " /4" /2" 2" 2 " ART 99H Piece Stainless Steel Ball Valve BSP Taper / Ends (ISO 7/) ull Bore 82 Bar Rated ( /4 - ") 69 Bar Rated ( /4 - /2") 62 Bar Rated (2-4") -25 C to +200 C PTE Seals ISO Direct Mount Locking Lever /8" /4" " /4" /2" 2" 2 " 4" ART Piece langed PN6/40 Stainless Steel Ball Valve ull Bore 40 Bar Rated ( /2-2") 6 Bar Rated (2 /2-8") ISO Direct Mount -25 C to +200 C ( /2-4") -25 C to +80 C (5-8") PTE Seats Viton Seals Locking Lever /4" " /4" /2" 2" 2 " 4" 5" 6" 8" NEW ART Piece langed PN6 Stainless Steel ire Safe Ball Valve ull Bore 40 Bar Rated ( /2-2") 6 Bar Rated (2 /2-4") -25 C to +200 C PTE Seats Anti Static Device ISO Direct Mount TUV Certified to API STD 607 Locking Device /4" " /4" /2" 2" 2 " 4" ART Piece langed ANSI CLASS 50 Stainless Steel Ball Valve ull Bore 20 Bar Rated -25 C to +200 C PTE Seats Viton Seals ISO Direct Mount Locking Lever /4" " /4" /2" 2" 2 " 4"

17 Stainless Steel Valves NEW ART Piece langed ANSI CLASS 50 Stainless Steel ire Safe Ball Valve ull Bore 20 Bar Rated -25 C to +200 C PTE Seats Anti Static Device ISO Direct Mount TUV Certified to API STD 607 Locking Device /4" " /4" /2" 2" 2 " 4" ART 987T/988L PN82 Stainless Steel T & L Port Ball Valve BSP Taper / Ends (ISO 7/) Reduced Bore 82 Bar Rated ( /4 - ") 69 Bar Rated ( /4 - /2") 62 Bar Rated (2-4") -25 C to +200 C PTE/Viton Seals ISO Direct Mount Locking Lever /8" /4" " /4" /2" 2" 2 " 4" ART 960 Stainless Steel Gate Valve BSP Parallel / Ends (ISO 7/) 6 Bar Rated -25 C to +80 C ull Bore /8" /4" " /4" /2" 2" ART 96 Stainless Steel Globe Valve BSP Parallel / Ends (ISO 7/) 6 Bar Rated -25 C to +80 C ull Bore /8" /4" " /4" /2" 2" ART 96 Stainless Steel Disc Wafer Check Valve 6 Bar Rated -25 C to +80 C O Ring Viton 2" 2 " 4" 5" 6" 8" 0" 2" To suit PN6 and ANSI 50 langes 7

18 Stainless Steel Valves ART 964 PN40 Stainless Steel Wafer Spring Check Valve 40 Bar Rated -25 C to +200 C Metal Seat /4" " /4" /2" 2" 2 " 4" To suit PN0, PN6 and ANSI 50 and 00 langes ART PN6 Stainless Steel Swing Check Valve BSP Parallel / Ends (ISO 7/) 6 Bar Rated -25 C to +80 C Metal Seat /8" /4" " /4" /2" 2" ART 966 PN82 Stainless Steel Spring Check Valve BSP Parallel / Ends (ISO 7/) 82 Bar Rated ( /4 - ") 69 Bar Rated ( /4 - /2") 62 Bar Rated (2-4") -25 C to +80 C Metal Seat /8" /4" " /4" /2" 2" 2 " 4" ART 968 Stainless Steel Y Type Strainer BSP Parallel / Ends (ISO 7/) 55 Bar Rated -25 C to +80 C Stainless Steel Screen mm /8" /4" " /4" /2" 2" 2 " 4" ART 969 Stainless Steel Y Type Strainer langed PN6 6 Bar Rated -25 C to +80 C /2-2" mm Screen 2 /2-4" 2mm Screen /4" " /4" /2" 2" 2 " 4"

19 Cast Iron Valves NEW ART 279 Ductile Iron langed Ball Valve 6 Bar Rated -0 C to +50 C ISO Direct Mount Blow out proof stem Lockable Lever Chrome Plated Brass Ball Viton O-Ring /4" " /4" /2" 2" 2 " 4" 5" 6" 8" NEW ART 280 Ductile Cast Iron Iron PN6 langed langed Ball Swing Valve Check Valve to BS55 6 Bar Rated -0 C to to +50 C +20 C ISO Bronze Direct Trim Mount Blow out proof stem Lockable Lever Stainless Steel Ball Viton O-Ring /4" " /4" /2" 2" 2 " 4" 5" 6" 8" NEW ART 28 Ductile Iron langed Ball Valve 6 Bar Rated -0 C to +70 C ISO Direct Mount Blow out proof stem Lockable Lever Chrome Plated Brass Ball Viton O-Ring DVGW Gas Approved /4" " /4" /2" 2" 2 " 4" 5" 6" 8" NEW ART 25 Ductile Iron Butterfly Valve Wafer Type 6 Bar Rated -0 C to +0 C EPDM Liner Stainless Steel Disc ISO Top 2" 2 " 4" 5" 6" 8" 0" 2" Gearbox Available (We strongly advise gearbox on all 8", 0" and 2") To suit PN0, PN6 and ANSI 50 langes NEW ART 40 Ductile Iron Butterfly Valve Lugged and Tapped Type 6 Bar Rated -0 C to +0 C EPDM Liner Stainless Steel Disc ISO Top To suit PN6 langes only 2" 2 " 4" 5" 6" 8" 0" 2" Gearbox Available (We strongly advise gearbox on all 8", 0" and 2") 9

20 Cast Iron Valves ART 0 Ductile Iron Wafer Butterfly Valve 6 Bar Rated -0 C to +0 C EPDM Liner DI Zinc Plated Disc ISO Top 2" 2 " 4" 5" 6" 8" 0" 2" Gearbox Available (We strongly advise gearbox on all 8", 0" and 2") To suit PN0, PN6 and ANSI 50 langes ART 5 Ductile Iron Wafer Butterfly Valve 6 Bar Rated -0 C to +0 C EPDM Liner Stainless Steel Disc ISO Top WRAS Approved 2" 2 " 4" 5" 6" 8" 0" 2" Gearbox Available (We strongly advise gearbox on all 8", 0" and 2") To suit PN0, PN6 and ANSI 50 langes ART 20 Ductile Iron Wafer Butterfly Valve 6 Bar Rated -0 C to +90 C NBR Liner Stainless Steel Disc ISO Top 2" 2 " 4" 5" 6" 8" 0" 2" Gearbox Available (We strongly advise gearbox on all 8", 0" and 2") To suit PN0, PN6 and ANSI 50 langes ART 5 Ductile Iron Lugged and Tapped Butterfly Valve 6 Bar Rated -0 C to +0 C EPDM Liner Stainless Steel Disc ISO Top WRAS Approved To suit PN6 langes only 2" 2 " 4" 5" 6" 8" 0" 2" Gearbox Available (We strongly advise gearbox on all 8", 0" and 2") Larger sizes available on request ART 45 Ductile Iron Lugged and Tapped Butterfly Valve 6 Bar Rated -0 C to +90 C NBR Liner DI Zinc Plated Disc ISO Top 8"-2" Gear Box Operated To suit PN6 langes only 2" 2 " 4" 5" 6" 8" 0" 2" Gearbox Available (8" - 2" Supplied c/w G/Box for dry duty) Larger sizes available on request 20

21 Cast Iron Valves ART 70 Cast Iron PN6 langed Swing Check Valve to BS EN24 (BS 55) 6 Bar Rated -0 C to +20 C Bronze Trim 2" 2 " 4" 5" 6" 8" 0" 2" Larger sizes available on request ART 2 Cast Iron Dual Plate Wafer Check Valve 6 Bar Rated -0 C to +20 C Stainless Steel Disc EPDM Seat 2" 2 " 4" 5" 6" 8" 0" 2" To suit PN0, PN6 and ASA 50 langes ART 7 Ductile Iron PN6 Ball Check Valve BSP Parallel / End (ISO 228/) 6 Bar Rated 0 C to +80 C Epoxy inish NBR Seals NBR Coated Aluminium Ball " /4" /2" 2" 2 " ART 72 Ductile Iron PN6 langed Ball Check Valve to BS EN24 (BS55) 6 Bar Rated 0 C to +80 C Epoxy inish NBR Seals NBR Coated Aluminium Ball 2" 2 " 4" 5" 6" 8" 0" 2" NEW ART 26 Cast Iron PN6 langed Double Check Valve 6 Bar Rated 0 C to +2 C WRAS Approved 2" 2 " 4" 5" 6" 8" 0"

22 Cast Iron Valves ART 85 Cast Iron PN6 langed Y Type Strainer 6 Bar Rated -0 C to +20 C Stainless Steel Screen.5mm 2" 2 " 4" 5" 6" 8" 0" 2" Larger sizes available on request ART 25 Cast Iron PN6 langed Gate Valve to BS Bar Rated -0 C to +20 C Bronze Trim Stainless Steel Stem 2" 2 " 4" 5" 6" 8" 0" 2" Larger sizes available on request ART 05 Cast Iron PN6 langed Gate Valve to BS EN7 6 Bar Rated -0 C to +20 C Brass Trim Stainless Steel Stem 2" 2 " 4" 5" 6" 8" 0" 2" ART 20 Cast Iron Table E & D langed Gate Valves to BS Bar Rated -0 C to +50 C Bronze Trim Stainless Steel Stem 2" 2 " 4" 5" 6" 8" ART 260 Cast Iron PN6 Globe Valve to BS Bar Rated -0 C to +200 C Bronze Trim Stainless Steel Stem 2" 2 " 4" 5" 6" 8" 0" 2"

23 Hydronic Balancing & Controls ART 25 DZR Brass ixed Orifice Double Regulating Valve (ODRV) 25 Bar Rated -0 C to +20 C BSP Parallel Ends (ISO 7/) EPDM Seat 5 Year Guarantee /4" " /4" /2" 2" NEW ART 22 DZR Brass ixed Orifice Double Regulating Valve (ODRV) 25 Bar Rated -0 C to +20 C BSP Parallel Ends (ISO 228/) EPDM Seat 5 Year Guarantee /4" " /4" /2" 2" ART 25 PRS DZR Brass ixed Orifice Double Regulating Valve (ODRV) 25 Bar Rated -0 C to +20 C 'M' Press Ends EPDM Seat 5 Year Guarantee 5mm 22mm 28mm 5mm 42mm 54mm ART 26 DZR Brass Double Regulating Valve (DRV) 20 Bar Rated -0 C to +20 C BSP Parallel Ends (ISO 7/) EPDM Seat 5 Year Guarantee /4" " /4" /2" 2" Note: Low low version available in /2" ART 28 DZR Brass Variable Orifice Double Regulating Valve (VODRV) 25 Bar Rated -0 C to +20 C BSP Parallel Ends (ISO 7/) 5 Year Guarantee /4" " /4" /2" 2"

24 Hydronic Balancing & Controls ART 250 Ductile Iron Double Regulating Valve (DRV) 6 Bar Rated -0 C to +20 C langed PN6 C/W Ext & Test Points for Variable Orifice Double Regulating Valve (VODRV) 2" 2 " 4" 5" 6" 8" 0" 2" ART 27 DZR Brass Orifice Plate (OP) 20 Bar Rated -0 C to +20 C BSP Parallel (½") Taper (¾ - 2") M/ Ends (ISO 7/) 5 Year Guarantee /4" " /4" /2" 2" Note: Standard, Medium, Low, Ultra Low and Ultra Ultra Low low versions available in /2" ART 270 Stainless Steel Orifice Plate (OP) 6 Bar Rated -0 C to +20 C Wafer Pattern C/W Ext & Test Points 2" 2 " 4" 5" 6" 8" 0" 2" ART 29 DZR Automatic low Balancing Valve - Constant low Regulator (CR) 25 Bar Rated -0 C to +20 C BSP Parallel Ends (ISO 7/) 5 Year Guarantee /4" " /4" /2" 2" ART 229 Ductile Iron Automatic low Balancing Valve - Constant low Regulator (CR) 6 Bar Rated -20 C to +20 C Wafer Pattern 5 Year Guarantee 2" 2 " 4" 5" 6" 8" 0" 2"

25 Hydronic Balancing & Controls ART 20C DZR Pressure Independent Control & Balancing Valve (PICV) 25 Bar Rated -0 C to +20 C BSPM Parallel (ISO 228/) P range kpa 5 Year Guarantee Union Tail Pieces & Gaskets req'd (2 per valve for BSP male connection) DN low (l/s) Available control actuator types Linear, Thermoelectric & Thermostatic. 24V/20V point control, 24V 0-0V modulating (see pg 26) DN 0-5 available in Low & High low variants ART 20 DZR Pressure Independent Control & Balancing Valve (PICV) 25 Bar Rated -0 C to +20 C BSP Parallel (ISO 228/) P range kpa 5 Year Guarantee Easy flush due to simple removal of DP control cartridge DN low (l/s) Available control actuator types Linear & Thermoelectric. 24/20V point control, 24V 0-0V modulating (see pg 26) DN 5-25 available in Low & High low variants ART C2V (L) / C22V (L) / C2E (L) Control actuator to fit PICV ART DN5-50 M0 x.5 Swivel knurled nut assembly Manual Override IP 54 rated Art C2V (L) 24VAC 50Hz -Point Control Art C22V (L) 20VAC 50Hz -Point Control Art C2E (L) 24VAC 50Hz Mod 0-0V Control ART 20C UNION TAIL PCS 2 Piece Union & gasket to suit Art 20C valves DN required per Art 20C DN0 - G /2" To pipe R /8" BSPM DN5 - G /4" To pipe R /2" BSPM DN20 - G " To pipe R /4" BSPM DN25 - G /4" To pipe R" BSPM ART 200 Cast Iron PN6 langed Pressure Independent Control & Balancing Valve (PICV or PIBCV) 6 Bar Rated -0 C to +20 C P range kpa 0-0V Modulating Actuator DN low (l/s)

26 Hydronic Balancing & Controls ART 24 DZR Differential Pressure Control Valve (DPCV) 6 Bar Rated -0 C to +20 C BSP Parallel Ends (ISO 228/) Max P 400 kpa 5 Year Guarantee DN low (l/s) P vers (kpa) 5-0, Matching Partner Valve ART 28DP, available in Low/High P variants ART 28DP DZR Differential Pressure Control Partner Balancing Valve (VODRV) 25 Bar Rated -0 C to +20 C BSP Parallel Ends (ISO 7/) C/W Imp Tube Connection & Test Points DN Partner Valve for ART 24 both in Low/High P variants ART 24ITM, 24IT2M Copper Impulse capillary tube for Differential Pressure Control Valves ART 24 ART 24IT available in or 2m length, G /8" Thread incl. 2 x ART 24V ART 24IT Kit Copper Impulse capillary tube for Differential Pressure Control Valves Art 240 & Art 24 /4" M fitting, Binder Test Point & 4mm 2m length copper tube + compression fittings MONOLINK DZR Terminal Unit connection system 25 Bar Rated -0 C to +20 C from 00mm centres DN5, 20, 25, 2 & 40 actory preassembled and tested lexible configuration 'H' piece lush & Chemical Cleaning in accordance with BSRIA/CIBSE guidance 5 Year Guarantee Contact the sales office for thread standards. 26

27 Hydronic Balancing & Controls ART 240 Cast Iron PN6 langed Differential Pressure Control Valve (DPCV) 6 Bar Rated -0 C to +20 C Max P 400 kpa DN low (l/s) P vers (kpa) Matching Partner Valve ART 250 (pg 24), Low/High P variants x capillary tube kit required code ADPC24KIT ART 24 Cast Iron PN6 langed Differential Pressure Control Valve (DPCV) 6 Bar Rated -0 C to +20 C Max P 400 kpa DN low (l/s) P vers (kpa) DPCV performs flow measuring and isolation function so no additional partner valve required. x capillary tube kit required code ADPC24KIT CRM Brass port Rotary Mixing/Diverting Control Valve 0 Bar Rated -5 C to +20 C Internal Thread Rp in accordance with EN (ISO 7/) DN5-50 fast CLIP system installation DN Kvs CRV/CRE control actuator required CRV/CRE Control actuator to fit CRM 5-50 above Max Torque 5Nm IP44 Manual Control with position indication on cover DN5-50 fast CLIP system installation CRV 20 20VAC 50Hz -Point 2 x Auxillary end switches CRV 24 24VAC 50Hz -Point 2 x Auxillary end switches CRE 24 24VAC 50Hz Mod 0-0V 0-0V feedback signal CRV/CRE Adaptor Kit AK4 Actuator mounting kit for Esbe, Danfoss, Siemens & Honeywell Valves AK2 ISO Mounting kit for ball valves /2" - 2" Adapter kits for alternative manufacturers available 27

28 Hydronic Balancing & Controls CRZ2 Brass 2 port ON-O Zone Control Valve 2 Bar Rated 2 C to +20 C Max P=6bar DN5-2 WRAS approved BSP Parallel (ISO 7/) DN Kvs CRI2 control actuator required CRI2 Control actuator to fit CRZ ON-O Control 20V/24V option Max Torque 5-5Nm IP44 Manual Control with position indication on cover Rotation Time 2s/90 CRZ2 < DN2, 2s/90 DN Auxillary End switch optional DN5-2 ast CLIP system installation CRZ Brass port ON-O Zone Control Valve 2 Bar Rated 2 C to +20 C Max P=6bar ast CLIP system installation BSP Parallel (ISO 7/) DN Kvs CRI control actuator required CRI A Control actuator to fit CRZ 20-2 ON-O Control 20V/24V option Max Torque 5Nm ast CLIP system installation Manual Control with position indication on cover Rotation Time 20s/90 IP44 Auxillary End switch optional LAGGING & ISOLATION BOXES Available for ART 25, ART 28, MONOLINK etc ART 299 Spare Test Point Set of two, one red tab, one blue tab 20 Bar Rated -0 C to +20 C ART 298 Spare Extensions Stainless Steel 20 Bar Rated -0 C to +20 C 28

29 Pressure Control Valves ART 642 Gunmetal Safety Valve BSPP emale (ISO 228/) 6 Bar Rated -50 C to +95 C EPDM Diaphragm WRAS Approved /4" " /4" /2" 2" 2 /2" NEW ART 645 Gunmetal High Discharge Safety Valve BSPP emale (ISO 228/) 6 Bar Rated -50 C to +95 C EPDM Diaphragm WRAS Approved /4" " /4" /2" 2" NEW ART 642 L Gunmetal Safety Valve DIN lange PN6 BSPP emale (ISO 228/) 6 Bar Rated -50 C to +95 C EPDM Diaphragm WRAS Approved /4 /2 2 2 / RT 642 L NEW ART 645 L Gunmetal Safety Valve DIN lange PN6 BSPP emale (ISO 228/) 6 Bar Rated -50 C to +95 C EPDM Diaphragm WRAS Approved /4 / NEW ART 80 Brass Atmospheric Discharge Safety Valve BSPP Male (ISO 228/) 50 Bar Rated -60 C to +225 C PTE Seal PED 204/68/EU /8" /2 /

30 Pressure Control Valves NEW ART 45 Stainless Steel Safety Valve BSPP emale (ISO 228/) 70 Bar Rated -60 C to +225 C PTE Seal PED 204/68/EU /4" " /4" /2" 2" NEW NEW ART 460 Stainless Steel Safety Valve BSPP Male (ISO 228/) 25 Bar Rated -60 C to +225 C PTE Seal PED 204/68/EU /8 /2 /4 " NEW ART 67 Gunmetal Pressure Relief Valve BSPP emale (ISO 228/) 20 Bar Rated -60 C to +225 C PTE Seal /8 /4" " /4" /2" 2" NEW ART 622 Brass Adjustable Pressure Relief Valve BSPP emale (ISO 228/) 0-6 Bar Rated 0 C to +50 C Screwed BSP Parallel /4" " /4" /2" 2" 2 " NEW ART 47 Stainless Steel Pressure Relief Valve BSPP emale (ISO 228/) 20 Bar Rated -60 C to +225 C PTE Seal /8 /2 /4 /4 /

31 Pressure Control Valves ART 68 M Gunmetal Pressure Reducing Valve BSP Taper M/M Ends (ISO 7/) 40 Bar Rated -0 C to +95 C Outlet Pressure to 8 Bar (Pre-set at Bar) Union Tail Pcs included Optional Pressure Gauge WRAS Approved PED 204/68/EU BS EN 567:999 approved /4" " /4" /2" 2" ART 68 Gunmetal Pressure Reducing Valve BSPP / Ends (ISO 228/) 40 Bar Rated -0 C to +95 C Outlet Pressure to 8 (Pre-set at Bar) Optional Pressure Gauge WRAS Approved PED 204/68/EU BS EN 567:999 approved /2 / NEW ART 48 M Stainless Steel Pressure Reducing Valve BSP Taper M/M Ends (ISO 7/) 40 Bar Rated -0 C to +95 C EPDM Seal Outlet Pressure to 8 /2 /4 /4 / NEW ART 48 Stainless Steel Pressure Reducing Valve BSPP / Ends (ISO 228/) 40 Bar Rated -0 C to +95 C EPDM Seal Outlet Pressure to 8 /2 /

32 Plastic Valves BVI / ABS ABS Industrial Double Union Ball Valve Solvent Weld Ends 5 Bar Rated ( /8" to 2") 9 Bar Rated (2 /2" to 4") -20 C to +80 C EPDM Seals (BVI ) PM (Viton) Seals (BVI ) /8" /4" " /4" /2" 2" 2 " 4" A ABS Industrial Double Union Ball Valve Solvent Weld Ends 5 Bar Rated ( /8" to 2") 9 Bar Rated (2 /2" to 4") -20 C to +80 C EPDM Seals /8" /4" " /4" /2" 2" 2 " 4" BVI / PVC PVC Industrial Double Union Ball Valve Solvent Weld Ends 6 Bar Rated ( /8" to 2") 0 Bar Rated (2 /2" to 4") 0 C to +60 C EPDM Seals (BVI ) PM (Viton) Seals (BVI ) /8" /4" " /4" /2" 2" 2 " 4" P PVC Double Union Ball Valves Solvent Weld Ends 6 Bar Rated ( /8" to 2") 0 Bar Rated (2 /2" to 4") 0 C to +60 C EPDM Seals /8" /4" " /4" /2" 2" 2 " 4" CVD ABS ABS Double Union Spring Check Valves Solvent Weld Ends 5 Bar Rated 0 C to +60 C EPDM Seals /4" " /4" /2" 2"

33 Plastic Valves CVD PVC PVC Double Union Spring Check Valves Solvent Weld Ends 6 Bar Rated 0 C to +60 C EPDM Seals /4" " /4" /2" 2" BVL / & BVT / PVC Way Ball Valves 0 Bar Rated 0 C to +60 C EPDM Seals BVL 'L' Port, Solvent Weld End BVL 'L' Port, BSP Parallel Ends BVT 'T' Port, Solvent Weld End BVT 'T' Port, BSP Parallel Ends /8" /4" " /4" /2" 2" CVW 50 PVC Wafer Plate Check Valves 0 Bar Rated 0 C to +60 C EPDM Seals /4" /2" 2" 2 " 4" 5" 6" 8" 0" 2" DVD / PVC Diaphragm Valve Double Union Solvent Weld Ends 0 Bar Rated 0 C to +60 C EPDM Diaphragm (DVD ) PM (Viton) Diaphragm (DVD ) /8" /4" " /4" /2" 2" BY 50/5 PVC Wafer Butterfly Valve 0 Bar Rated (2" to 5") 6 Bar Rated (6" to 0") 0 C to +60 C EPDM Seals (BY 50) PM (Viton) Seals (BY 5) 2" 2 " 4" 5" 6" 8" 0"

34 Solenoid Valves SLP N/C (EPDM) Brass Solenoid Valve Pilot Operated 2/2 way Normally Closed (ISO 228/) Body Brass EPDM Diaphragm Voltage 24V ac/dc, 0v ac, 20v ac, 2v dc 0 C to +20 C WRAS Approved /8" /4" " /4" /2 2" SLP N/O (EPDM) Brass Solenoid Valve Pilot Operated 2/2 way Normally Open (ISO 228/) Body Brass EPDM Diaphragm Voltage 24V ac/dc, 0v ac, 20v ac, 2v dc 0 C to +20 C WRAS Approved /8" /4" " /4" /2 2" SLP N/C (NBR) Brass Solenoid Valve Pilot Operated 2/2 way Normally Closed (ISO 228/) Body Brass NBR Diaphragm Voltage 24V ac/dc, 0v ac, 20v ac, 2v dc 0 C to +80 C /8" /4" " /4" /2 2" SLP N/O (NBR) Brass Solenoid Valve Pilot Operated 2/2 way Normally Open (ISO 228/) Body Brass NBR Diaphragm Voltage 24V ac/dc, 0v ac, 20v ac, 2v dc 0 C to +80 C /8" /4" " /4" /2 2" ZS N/C (EPDM) Brass Solenoid Valve Servo-activated 2/2 way Normally Closed (ISO 228/) Body Brass EPDM Diaphragm Voltage 24V ac/dc, 0v ac, 20v ac, 2v dc 0 C to +20 C /8" /4" " /4" /2 2"

35 Solenoid Valves ZS N/O (EPDM) Brass Solenoid Valve Servo-activated 2/2 way Normally Open (ISO 228/) Body Brass EPDM Diaphragm Voltage 24V ac/dc, 0v ac, 20v ac, 2v dc 0 C to +20 C /8" /4" " /4" /2 2" ZS N/C (NBR) Brass Solenoid Valve Servo-activated 2/2 way Normally Closed (ISO 228/) Body Brass NBR Diaphragm Voltage 24V ac/dc, 0v ac, 20v ac, 2v dc 0 C to +80 C /8" /4" " /4" /2 2" ZS N/O (NBR) Brass Solenoid Valve Servo-activated 2/2 way Normally Open (ISO 228/) Body Brass NBR Diaphragm Voltage 24V ac/dc, 0v ac, 20v ac, 2v dc 0 C to +80 C /8" /4" " /4" /2 2" ZS N/C (PM) Brass Solenoid Valve Servo-activated 2/2 way Normally Closed (ISO 228/) Body Brass PM Diaphragm Voltage 24V ac/dc, 0v ac, 20v ac, 2v dc 0 C to +20 C /8" /4" " /4" /2 2" ZS N/O (PM) Brass Solenoid Valve Servo-activated 2/2 way Normally Open (ISO 228/) Body Brass PM Diaphragm Voltage 24V ac/dc, 0v ac, 20v ac, 2v dc 0 C to +20 C /8" /4" " /4" /2 2"

36 Solenoid Valves ZS N/C (EPDM) Stainless Solenoid Valve Servo-activated 2/2 way Normally Closed (ISO 228/) Body Stainless EPDM Diaphragm Voltage 24V ac/dc, 0v ac, 20v ac, 2v dc 0 C to +20 C /8" /4" " /4" /2 2" ZS N/O (EPDM) Stainless Solenoid Valve Servo-activated 2/2 way Normally Open (ISO 228/) Body Stainless EPDM Diaphragm Voltage 24V ac/dc, 0v ac, 20v ac, 2v dc 0 C to +20 C /8" /4" " /4" /2 2" ZS N/C (NBR) Stainless Solenoid Valve Servo-activated 2/2 way Normally Closed (ISO 228/) Body Stainless NBR Diaphragm Voltage 24V ac/dc, 0v ac, 20v ac, 2v dc 0 C to +80 C /8" /4" " /4" /2 2" ZS N/O (NBR) Stainless Solenoid Valve Servo-activated 2/2 way Normally Open (ISO 228/) Body Stainless NBR Diaphragm Voltage 24V ac/dc, 0v ac, 20v ac, 2v dc 0 C to +80 C /8" /4" " /4" /2 2" ZS N/C (PM) Stainless Solenoid Valve Servo-activated 2/2 way Normally Closed (ISO 228/) Body Stainless PM Diaphragm Voltage 24V ac/dc, 0v ac, 20v ac, 2v dc 0 C to +20 C /8" /4" " /4" /2 2"

37 Solenoid Valves ZS N/O (PM) Stainless Solenoid Valve Servo-activated 2/2 way Normally Open (ISO 228/) Body Stainless PM Diaphragm Voltage 24V ac/dc, 0v ac, 20v ac, 2v dc 0 C to +20 C /8" /4" " /4" /2 2" THP N/C (PTE) Brass Solenoid Valve Pilot Operated 2/2 way Normally Closed (ISO 228/) Body Brass PTE Diaphragm Voltage 24V ac/dc, 0v ac, 20v ac, 2v dc 0 C to +65 C /8" /4" " /4" /2 2" Namur Universal Direct Mount Namur Solenoid Life Cycle 2,000,000 Operations 5/2 - /2 Interchangeable Voltage 0v ac, 20v ac, 24v ac/dc IP65 Manual Over-ride Control -20 C to +60 C PUT Timer Range 0.5 to 0 Seconds On, 0 Seconds to 45 Mins Off LED Light to indicate timing 78 x 4 x 7

38 Solenoid Valves NEW ART GSV N/C (NBR) ½" - " Automatic Gas Valve BSP (ISO 228/) Body Aluminium Alloy Voltage 20V (-5%+0%) 50-60Hz -20 C to +60 C EN6 Gas Approved /4" " NEW ART GSV N/C (NBR) ¼" - 2" Automatic Gas Valve BSP (ISO 228/) Body Aluminium Alloy Voltage 20V (-5%+0%) 50-60Hz -20 C to +60 C EN6 Gas Approved /4" /2" 2" NEW ART GS N/C (NBR) 2½" - 4" Automatic Gas Valve langed PN6 Body Aluminium Alloy Voltage 20V (-5%+0%) 50-60Hz -20 C to +60 C EN6 Gas Approved 2 " 4"

39 Knife Gate Valves ART 990 Cast Iron Knife Gate Valve Uni Directional (Bi Directional available on enquiry). Handwheel operated. To suit PN0 flanges (other flange requirement available on request) 0 Bar Rated 2" - 0" 6 Bar Rated 2" - 6" GG25 Cast Iron Body 04SS Blade Metal/EPDM Seat 2" 2 " 4" 5" 6" 8" 0" 2" 4" 6" (6 Bar Pressure, other body and seat materials and alternative operators available on request) ART 990 DA Cast Iron Knife Gate Valve Uni Directional (Bi Directional available on enquiry). Double acting pneumatic actuator. To suit PN0 flanges (other flange requirements available on request) 0 Bar Rated 2" - 0" 6 Bar Rated 2" - 6" GG25 Cast Iron Body 04SS Blade Metal/EPDM Seat 2" 2 " 4" 5" 6" 8" 0" 2" 4" 6" (6 Bar Pressure, other body and seat materials and alternative operators available on request) ART 99 Stainless Steel Knife Gate Valve Uni Directional (Bi Directional available on enquiry). Handwheel operated. To suit PN0 flanges (other flange requirements available on request) 0 Bar Rated 2" - 0" 6 Bar Rated 2" - 6" C8M Stainless Steel Body 6SS Blade Metal/EPDM Seat 2" 2 " 4" 5" 6" 8" 0" 2" 4" 6" (6 Bar Pressure, other body and seat materials and alternative operators available on request) ART 99 DA Stainless Steel Knife Gate Valve Uni Directional (Bi Directional available on enquiry) Double acting pneumatic actuator. To suit PN0 flanges (other flange requirements available on request) 0 Bar Rated 2" - 0" 6 Bar Rated 2" - 6" C8M Stainless Steel Body 6SS Blade Metal/EPDM Seat 2" 2 " 4" 5" 6" 8" 0" 2" 4" 6" (6 Bar Pressure, other body and seat materials and alternative operators available on request) Through Conduct and Square fabricated units are also available on enquiry. 9

40 lexible Connectors ART 400/40 PN6 Screwed lexible Connector BS2 BSP Taper (ISO 7/) Screwed BSP Taper 6 Bar Rated EPDM (ART 400) NBR (ART 40) -20 C to +00 C EPDM -20 C to +80 C NBR /4" " /4" /2" 2" 2 " ART 420/40 PN6 langed lexible Connector BS Bar Rated EPDM (ART 420) NBR (ART 40) -20 C to +00 C EPDM -20 C to +80 C NBR /4" /2" 2" 2 " 4" 5" 6" 8" 0" 2" Larger sizes available on request ART 425/45 PN0 langed lexible Connector BS Bar Rated EPDM (ART 425) NBR (ART 45) -20 C to +00 C EPDM -20 C to +80 C NBR 8" 0" 2" ART 427 PN6 langed lexible Connector 6 Bar Rated -20 C to +00 C EPDM /4" /2" 2" 2 " 4" 5" 6" 8" 0" 2" ART 450/460 PN6 Tied langed lexible Connector BS Bar Rated EPDM (ART 450) NBR (ART 460) -20 C to +00 C EPDM -20 C to +80 C NBR /4" /2" 2" 2 " 4" 5" 6" 8" 0" 2" Larger sizes available on request 40

41 lexible Connectors ART 455/465 PN0 Tied langed lexible Connector BS Bar Rated EPDM (ART 455) NBR (ART 465) -20 C to +00 C EPDM -20 C to +80 C NBR 8" 0" 2" Larger sizes available on request 4

42 Radiator Valves ART 560 Straight Thermostatic Valve with operating plastic cap Screwed BSP Parallel M/ (ISO 228/) Auto Seal Tail Piece its all sensor options Suitable for use with all radiators BSP to copper adaptor available /4" Suitable for use with all Thermostatic Head and sensor options. ART 560 PS Straight Thermostatic Valve with Pre-setting & operating plastic cap Screwed BSP Parallel M/ (ISO 228/) Auto Seal Tail Piece its all sensor options Suitable for use with all radiators BSP to copper adaptor available /4" Suitable for use with all Thermostatic Head and sensor options. ART 56 Angle Thermostatic Valve with operating plastic cap Screwed BSP Parallel M/ (ISO 228/) Auto Seal Tail Piece its all sensor options Suitable for use with all radiators BSP to copper adaptor available /4" Suitable for use with all Thermostatic Head and sensor options. ART 56 PS Angle Thermostatic Valve with Pre-setting & operating plastic cap Screwed BSP Parallel M/ (ISO 228/) Auto Seal Tail Piece its all sensor options Suitable for use with all radiators BSP to copper adaptor available /4" Suitable for use with all Thermostatic Head and sensor options. ART 564 Reverse Angle Thermostatic Valve with operating plastic cap Screwed BSP Parallel M/ (ISO 228/) Auto Seal Tail Piece its all sensor options Suitable for use with all radiators BSP to copper adaptor available /2" 5.5 Suitable for use with all Thermostatic Head and sensor options. 42

43 Radiator Valves ART 55 Angle Lockshield Radiator Valve Screwed BSP Parallel M/ (ISO 228/) Auto Seal Tail Piece Suitable for use with all radiators BSP to Copper Adaptor available on request /4" ART 55 Straight Lockshield Radiator Valve Screwed BSP Parallel M/ (ISO 228/) Auto Seal Tail Piece Suitable for use with all radiators BSP to Copper Adaptor available on request /4" ART 597 Thermostatic Head BSP Parallel (ISO 228/) Lockable Head Liquid Sensor rost Setting 6 C Conforms to EN25 M0 x.5 Standard Connection 76.5 x 5 ART 594 Manual Head Suitable for all Albion TRV valve bodies ABS RAL 900 ART 504 BSP to Copper Adaptor for radiator valves 4

44 Radiator Valves ART 598 Remote Adjuster with frost protection 2, 5 & 0m Capillary options Lockable & Tamperproof Liquid Sensor rost Setting 6 C M0 x.5 connections Head 90 x 49, Valve connector 9 x ART 599 Thermostatic Head with Remote Sensor 2m Capillary Lockable set-point Liquid Sensor rost Setting 6 C Conforms to EN 25 M0 x.5 connection Head x 49, Remote Sensor 96 x 5 ART 567 Angle Radiator Valve Pack Pack contains ART 597, ART 56, ART 57 & ART 504 x2 /2" 58.5 ART 82NC ART 82NO Thermo-electric actuator 0-20ac NC-Normally Closed NO-Normally Open 4mm stroke 2mm cable M0 x.5 Suitable for all /2" & /4" 560/56 Radiator Valves NC 52 x 42 NO 69 x 45 ART 824NC ART 824NO Thermo-electric actuator 24Vac NC-Normally Closed NO-Normally Open 4mm stroke 2mm cable M0 x.5 Suitable for all /2" & /4" 560/56 Radiator Valves NC 52 x 42 NO 69 x 45 44

45 Actuated Valves 50P-EL (BVI PVC) PVC Industrial Ball Valve Solvent Weld Ends C/W Electric Actuator 0v ac, 240v ac, 24v ac, 24v dc EPDM Seals /8" /4" " /4" /2" 2" 2 " 4" Other Voltages available on request. 50P-DA (BVI PVC) PVC Industrial Ball Valve Solvent Weld Ends C/W Double Acting Pneumatic Actuator EPDM Seals /8" /4" " /4" /2" 2" 2 " 4" P-SR (BVI PVC) PVC Industrial Ball Valve Solvent Weld Ends C/W Spring Return Pneumatic Actuator EPDM Seals /8" /4" " /4" /2" 2" 2 " 4" A-EL (BVI ABS) ABS Industrial Ball Valve Solvent Weld Ends C/W Electric Actuator 0v ac, 240v ac, 24v ac, 24v dc EPDM Seals /8" /4" " /4" /2" 2" 2 " 4" Other Voltages available on request. 50A-DA (BVI ABS) ABS Industrial Ball Valve Solvent Weld Ends C/W Double Acting Pneumatic Actuator EPDM Seals /8" /4" " /4" /2" 2" 2 " 4"

46 Actuated Valves 50A-SR (BVI ABS) ABS Industrial Ball Valve Solvent Weld Ends C/W Spring Return Pneumatic Actuator EPDM Seals /8" /4" " /4" /2" 2" 2 " 4" P-EL (BY 50) PVC Butterfly Valve Wafer Type C/W Electric Actuator 0v ac, 240v ac, 24v ac, 24v dc EPDM Seals 2" 2 " 4" 5" 6" 8" 0" Other Voltages available on request. 950P-DA (BY 50) PVC Butterfly Valve Wafer Type C/W Double Acting Pneumatic Actuator EPDM Seals 2" 2 " 4" 5" 6" 8" 0" P-SR (BY 50) PVC Butterfly Valve Wafer Type C/W Spring Return Pneumatic Actuator EPDM Seals 2" 2 " 4" 5" 6" 8" 0" /0P-EL (BVL /BVT ) PVC Way L & T Port Valves Solvent Weld Ends C/W Electric Actuator 0v ac, 240v ac, 24v ac, 24v dc EPDM Seals /8" /4" " /4" /2" 2" Other Voltages available on request. 46

47 Actuated Valves 8/0P-DA (BVL /BVT ) PVC Way L & T Port Valves Solvent Weld Ends C/W Double Acting Pneumatic Actuator EPDM Seals /8" /4" " /4" /2" 2" /0P-SR (BVL /BVT ) PVC Way L & T Port Valves Solvent Weld Ends C/W Spring Return Pneumatic Actuator EPDM Seals /8" /4" " /4" /2" 2" ART 60 EL Brass Ball Valve BSP Parallel / Ends (ISO 228/) C/W Electric Actuator 0v ac, 240v ac, 24v ac, 24v dc /8" /4" " /4" /2" 2" 2 " Other Voltages available on request. ART 60 DA Brass Ball Valve BSP Parallel / Ends (ISO 228/) C/W Double Acting Pneumatic Actuator /8" /4" " /4" /2" 2" 2 " ART 60 SR Brass Ball Valve BSP Parallel / Ends (ISO 228/) C/W Spring Return Pneumatic Actuator /8" /4" " /4" /2" 2" 2 "

48 Actuated Valves ART 99H EL Piece Stainless Steel Ball Valve BSP Taper Ends (ISO 7/) C/W Electric Actuator 0v ac, 240v ac, 24v ac, 24v dc /8" /4" " /4" /2" 2" 2 " 4" Other Voltages available on request. ART 99H DA Piece Stainless Steel Ball Valve BSP Taper Ends (ISO 7/) C/W Double Acting Pneumatic Actuator /8" /4" " /4" /2" 2" 2 " 4" ART 99H SR Piece Stainless Steel Ball Valve BSP Taper Ends (ISO 7/) C/W Spring Return Pneumatic Actuator /8" /4" " /4" /2" 2" 2 " 4" ART 88/87 EL Brass L & T Port Ball Valve BSP Parallel / Ends (ISO 228/) C/W Electric Actuator 0v ac, 240v ac, 24v ac, 24v dc /8" /4" " /4" /2" 2" Other Voltages available on request. ART 88/87 DA Brass L & T Port Ball Valve BSP Parallel / Ends (ISO 228/) C/W Double Acting Pneumatic Actuator /8" /4" " /4" /2" 2"

49 Actuated Valves ART 88/87 SR Brass L & T Port Ball Valve BSP Parallel / Ends (ISO 228/) C/W Spring Return Pneumatic Actuator /8" /4" " /4" /2" 2" ART 988/987 EL Stainless Steel L & T Port Ball Valve BSP Taper / Ends (ISO 7/) C/W Electric Actuator 0v ac, 240v ac, 24v ac, 24v dc /8" /4" " /4" /2" 2" Other Voltages available on request. ART 988/987 DA Stainless Steel L & T Port Ball Valve BSP Taper / Ends (ISO 7/) C/W Double Acting Pneumatic Actuator /8" /4" " /4" /2" 2" ART 988/987 SR Stainless Steel L & T Port BSP Taper / Ends (ISO 7/) C/W Spring Return Pneumatic Actuator /8" /4" " /4" /2" 2" ART 928 EL Stainless Steel ANSI 50 langed Ball Valve C/W Electric Actuator 0v ac, 240v ac, 24v ac, 24v dc /4" " /2" 2" 2 " 4" Other Voltages available on request. 49

50 Actuated Valves ART 928 DA Stainless Steel ANSI 50 langed Ball Valve C/W Double Acting Pneumatic Actuator /4" " /2" 2" 2 " 4" ART 928 SR Stainless Steel ANSI 50 langed Ball Valve C/W Spring Return Pneumatic Actuator /4" " /2" 2" 2 " 4" ART 926 EL Stainless Steel langed PN6 Ball Valve C/W Electric Actuator 0v ac, 240v ac, 24v ac, 24v dc /2 " /4" " /4" /2" 2" 2 " 4" Other Voltages available on request. ART 926 DA Stainless Steel langed PN6 Ball Valve C/W Double Acting Pneumatic Actuator /4" " /4" /2" 2" 2 " 4" ART 926 SR Stainless Steel langed PN6 Ball Valve C/W Spring Return Pneumatic Actuator /4" " /4" /2" 2" 2 " 4"

51 Actuated Valves NEW ART 279 EL Cast Iron PN6 langed Ball Valve C/W Electric Actuator 0v ac, 240v ac, 24v ac, 24v dc /4" " /4" /2" 2" 2 " 4" 5" 6" Other Voltages available on request. NEW ART 279 DA Cast Iron PN6 langed Ball Valve C/W Double Acting Pneumatic Actuator /4" " /4" /2" 2" 2 " 4" 5" 6" NEW ART 279 SR Cast Iron PN6 langed Ball Valve C/W Spring Return Pneumatic Actuator /4" " /4" /2" 2" 2 " 4" 5" 6" ART 5 EL Ductile Iron Wafer Butterfly Valve C/W Electric Actuator 0v ac, 240v ac, 24v ac, 24v dc Stainless Steel Disc EPDM Liner 2" 2 " 4" 5" 6" 8" 0" 2" Other Voltages available on request. ART 5 DA Ductile Iron Wafer Butterfly Valve C/W Double Acting Pneumatic Actuator Stainless Steel Disc EPDM Liner 2" 2 " 4" 5" 6" 8" 0" 2"

52 Actuated Valves ART 5 SR Ductile Iron Wafer Butterfly Valve C/W Spring Return Pneumatic Actuator Stainless Steel Disc EPDM Liner 2" 2 " 4" 5" 6" 8" 0" 2" ART 45 EL Ductile Iron Wafer Butterfly Valve C/W Electric Actuator 0v ac, 240v ac, 24v ac, 24v dc DI Zinc Plated Disc NBR Liner 2" 2 " 4" 5" 6" 8" 0" 2" Other Voltages available on request. ART 45 DA Ductile Iron Wafer Butterfly Valve C/W Double Acting Pneumatic Actuator DI Zinc Plated Disc NBR Liner 2" 2 " 4" 5" 6" 8" 0" 2" ART 45 SR Ductile Iron Wafer Butterfly Valve C/W Spring Return Pneumatic Actuator DI Zinc Plated Disc NBR Liner 2" 2 " 4" 5" 6" 8" 0" 2" ART 5 EL Ductile Iron Lugged and Tapped Butterfly Valve C/W Electric Actuator 0v ac, 240v ac, 24v ac, 24v dc Stainless Steel Disc EPDM Liner 2" 2 " 4" 5" 6" 8" 0" 2" Other Voltages available on request. 52

53 Actuated Valves ART 5 DA Ductile Iron Lugged and Tapped Butterfly Valve C/W Double Acting Pneumatic Actuator Stainless Steel Disc EPDM Liner 2" 2 " 4" 5" 6" 8" 0" 2" ART 5 SR Ductile Iron Lugged and Tapped Butterfly Valve C/W Spring Return Pneumatic Actuator Stainless Steel Disc EPDM Liner 2" 2 " 4" 5" 6" 8" 0" 2" ART SB Switch Box C/W 2 x V Micro Switches Namur Universal Direct Mount Namur Solenoid Life Cycle 2,000,000 Operations 5/2 - /2 Interchangeable Voltage 0v ac, 20v ac, 24v ac/dc IP65 Manual Over-ride Control -20 C to +60 C 5

54 Technical Information Pressure and Temperature Pressure and Temperature information shown in this Product Catalogue is for guidance only. Pressures stated are generally based on the smaller sizes of each product and may reduce significantly for the larger sizes. It is also a fundamental principle of valves and pipe work systems that if the temperature is increased then the pressure must be reduced. or exact pressure/temperature relationships we recommend that you check our product data sheets or consult our sales office. Although many of our valves are suitable for use at temperatures below freezing, it is necessary to take precautions to prevent the line fluid freezing and causing subsequent damage to the valve and pipe work system. Options Many of our valves can be supplied with alternative threads and flange drillings. We can also offer a wide range of paint options and coatings for non standard requirements and special applications. We hold stock of standard products with the handle options shown in the Product Catalogue, we can however supply valves with different colour handles, Tee handles, stem extensions, and hand wheels, etc. We are also happy to quote for supply of specials to your exact requirements. Our standard range of actuated valves can also be fitted with extra limit switches, proximity switches, positioners, non standard solenoid valves, and manual over rides. If you require an actuator from a specific manufacturer we can usually provide a competitive quotation. If you have any unusual or non standard requirement please do not hesitate to contact our sales office. Own Label Branding A very popular additional service that we offer is to brand our products with your name and logo. Our standard Brass and Stainless Steel ball valves can be supplied with the handles printed to your own unique design, or with your customers name and logo. There is a minimum order of 0 pieces and all we ask is a one off contribution towards the initial costs of the design and artwork. or further information please contact our sales office. Approvals and Certification Albion s commitment to quality is reflected by our operation of an independently assessed quality management system registered under ISO900:2008. We also operate an environmental management system that has been successfully assessed against the ISO400 standard. All applicable products conform to the Pressure Equipment Directive (PED) and where necessary are CE marked. Certain products also have specific approvals - EN approval for gas and WRAS approval for potable water. These items are indicated in the Product Catalogue. Many products also have other national approvals (ie DVGW, AGA, KIWA), please enquire if a specific approval is required. Test Certificates or Letters of Conformity are generally available for all products, please advise your requirements when placing orders. Disclaimer The information within this Product Catalogue was correct and accurate at the time of printing, this is subject to change without notice, which may impact the accuracy of the information. or the most up to date version please visit our website at 54

55 Technical Information BS 4504 lange Table PN6 PN0 PN6 PN40 DRILLING DRILLING DRILLING DRILLING DRILLING DN NB lange OD P.C.D. No. of Holes Hole Dia. lange OD P.C.D. No. of Holes Hole Dia. lange OD 0 /8" /2" /4" " /4" /2" " /2" " " " " " " " " " " " " P.C.D. No. of Holes Hole Dia. lange OD P.C.D. No. of Holes Hole Dia. lange OD P.C.D. No. of Holes Hole Dia. BS 0 lange Table D E H DRILLING DRILLING DRILLING DRILLING DN NB lange OD Thickness P.C.D. No. of Holes Hole Dia. lange OD Thickness P.C.D. No. of Holes 5 /2" /4" " /4" /2" " /2" " " " " " " " " " " " " Hole Dia. lange OD Thickness P.C.D. No. of Holes Hole Dia. lange OD Thickness P.C.D. No. of Holes Hole Dia. ASA lange Table CLASS 50 CLASS 00 CLASS 600 CLASS 900 DRILLING DRILLING DRILLING DRILLING DN NB lange OD P.C.D. No. of Holes Hole Dia. lange OD P.C.D. No. of Holes Hole Dia. 5 /2" /4" " /4" /2" " /2" " " " " " " " " " " " " lange OD P.C.D. No. of Holes Hole Dia. lange OD P.C.D. No. of Holes Hole Dia. 55

56 Technical Information Art 45 WRAS Art 45 EN Art 40P WRAS Art 40T WRAS Art 40 EN Art 89 WRAS Art 89 EN Art 50 WRAS Art 59 WRAS 56

57 October 204 October 204 Technical Information Art 75 KITE MARK Art 75 WRAS Art 5 / 5 WRAS This certifies that ALBION VALVES (UK) LIMITED has had the undermentioned product examined, tested and found, when correctly installed, to comply with the requirements of the United Kingdom Water Supply (Water ittings) Regulations and Scottish Water Byelaws. 75HW & 75LS STOP VALVES The certificate by itself is not evidence of a valid WRAS Approval. Confirmation of the current status of an approval must be obtained from the WRAS Directory ( The product so mentioned will be valid until the end of: July Certificate No. Secretary Chairman, Product Assessment Group Art 55 PRS WRAS ISO 400 ISO 900 This certifies that CAV. U. GIACOMO CIMBERIO S.P.A has had the undermentioned product examined, tested and found, when correctly installed, to comply with the requirements of the United Kingdom Water Supply (Water ittings) Regulations and Scottish Water Byelaws. CIM 220V & CIM 220M SPHERICAL VALVES The certificate by itself is not evidence of a valid WRAS Approval. Confirmation of the current status of an approval must be obtained from the WRAS Directory ( The product so mentioned will be valid until the end of: November Certificate No. Secretary Chairman, Product Assessment Group Art 54 WRAS SLP Solenoid WRAS Safety Valve WRAS 57

58 Technical Information Non-Electrical Valves ATEX ART 968 ATEX ART 969 ATEX ART 995 API607 ART 956 API607 ART 958 API607 ART 68 WRAS ART 48 WRAS Gas Solenoids EN6 58

59 Key is the dimension as illustrated on the drawings below. Example: ART 40P 2 Piece Brass Ball Valve BSP Parallel / Ends ull Bore 40 Bar Rated ( /4-2") 25 Bar Rated (2 /2-4") -20 C to +0 C /8" /4" " /4" /2" 2" 2 " 4" Handle options: Tee Handle - Yellow, Red + Blue Lever - Yellow ( /4" to 4") Lever - Red + Blue ( /2" to 2") 59

60 Distributor V2