VALVES 5
|
|
|
- Irma Norris
- 6 years ago
- Views:
Transcription
1
2 GLOBE VALVES GV-16, GV-25, GV-40 GV-16 GV-25 GV-40 GG-25 Cast Iron GSC-25 Cast Steel GSC-25 Cast Steel Seat Stainless Steel AISI 304 Stainless Steel AISI 304 Stainless Steel AISI 304 Stainless Steel Stainless Steel Stainless Steel Connection -FLANGED: DN15 all sizes are available in between DN400 NON-RISING STEM, SOFT SEATED GATE VALVE GTK-16 Ductile Iron GGG 40.3 Rubber Coated Cast Iron NBR/ Connection Max. Operating Temp. 110 C Max Operating Pressure /10 bar/6 bar/2,5 bar -FLANGED: DN40 all sizes are available in between DN1200 DISMANTLING JOINT / Ductile Iron GGG 40 & GGG 50 Nominal Diameter DN100 (4 ) - DN2200 (88 ) Operating Pressure Operating Temperature -80 C/+600 C s Fixed Bolts and Nuts Stainless Steel x Cr13 WAFER TYPE DISCO CHECK VALVES CV-10 CV-10P CV-10S1 CV-10S2 Ms58 Stainless Steel AISI 304 Stainless Steel AISI 316 Material Stainless Steel AISI 316 Stainless Steel AISI 316 Stainless Steel AISI 316 Centering Hoop Stainless Steel AISI 302 Stainless Steel AISI 302 Stainless Steel AISI 302 Spring Material Stainless Steel AISI 302 Stainless Steel AISI 302 Stainless Steel AISI 302 Wafer Type Wafer Type Wafer Type 40 bar 40 bar Min. Allowable Temp. -10 C -10 C -10 C Max. Operating Temp. 250 C 300 C 300 C -DN15 all sizes are available in between DN100 WAFER TYPE DISCO CHECK VALVES CV-11 CV-11 CV-11S1 CV-11S2 Cast Iron GG25 Stainless Steel AISI 304 Stainless Steel AISI 316 Material Cast Iron GG25 Stainless Steel AISI 304 Stainless Steel AISI 316 Centering Part Stainless Steel AISI 316 Stainless Steel AISI 304 Stainless Steel AISI 316 Spring Material Stainless Steel AISI 302 Stainless Steel AISI 302 Stainless Steel AISI 302 O-ring - - Wafer Type Wafer Type Wafer Type 40 bar 40 bar Min.Allowable Temp -10 C -10 C -10 C Max. Operating Temperature 100 C 300 C 300 C -DN125 all sizes are available in between DN200 DOUBLE PLATE CHECK VALVES CV-20/25 CV-20 CV-25 Cast Iron GG25 Cast Iron GG25 Material Stainless Steel AISI 316 Ductile Iron GGG 40.3 Resilient Seat Spring Material Stainless Steel AISI 304 Stainless Steel AISI 304 Bearing Teflon Teflon Wafer Type Wafer Type 10/ 10/ Min.Allowable Temp -10 C -10 C 110 C -FLANGED: DN50 all sizes are available in between DN300 for PN16 -FLANGED: DN350 all sizes are available in between DN600 for PN10
3 WAFER TYPE SWING CHECK VALVES CV-33/35 LIFT TYPE CHECK VALVES CLV-50 CV-33 CV-35 Stainless Steel AISI 316 Ni Coated Carbon Steel Material Stainless Steel AISI 316 Ni Coated Carbon Steel Bearing Ni Coated Carbon Steel Ni Coated Carbon St eel Eye Bolt Stainless Steel AISI 316 Ni Coated Carbon Steel O-ring Min.Allowable Temp -10 C -10 C 110 C -FLANGED: DN32 all sizes are available in between DN300 GG-25 Cast Iron Cover GG-25 Cast Iron Material Stainless Steel AISI 304 Spring Material Stainless Steel AISI 304 CrNi laminated pure graphite 9,6 bar Max. Operating Temperature 100 C 300 C -FLANGED: DN15 all sizes are available in between DN300 SWING TYPE CHECK VALVES SC-200 Stainless Steel AISI 304 Stainless Steel AISI 316 Material Stainless Steel AISI 304 Stainless Steel AISI 316 Pipe Plug Stainless Steel AISI 304 Stainless Steel AISI 316 Picking Material Max. Operating Temperature 180 C 180 C -THREADED: 1/2 all sizes available in between 2 SWING TYPE CHECK VALVES SC-400 Ms58 Bonnet Ms58 Spring Stainless Steel Washer ABS/NBR -THREADED: 1/2 all sizes available in between 2 FOOT VALVE -CW617N UNI EN Seat -CW617N UNI EN Holder Hostaform Pom-DIN5735 Spring Stainless Steel-UNI Nylon+NBR Filter Filter Stainless Steel Max. Oper. Temp. 110 C -THREADED: 1/2 all sizes available in between 2 STAINLESS STEEL BALL VALVES V-2T Stainless Steel AISI 304 Stainless Steel AISI 316 Ball Material Stainless Steel AISI 304 Stainless Steel AISI 316 Ball Seat R- (15%) R- (15%) 63 bar 63 bar Max. Operating Temperature -25/+180 C -25/+180 C -THREADED: 1/2 all sizes available in between 4
4 STAINLESS STEEL BALL VALVES V-3T Stainless Steel AISI 304 Stainless Steel AISI 316 Ball Material Stainless Steel AISI 304 Stainless Steel AISI 316 Ball Seat R- (15%) R- (15%) 40 bar 40 bar Max. Operating Temperature -25/+180 C -25/+180 C -THREADED: 1/4 all sizes available in between 4 STAINLESS STEEL BALL VALVES V-3F Stainless Steel AISI 304 Stainless Steel AISI 316 Ball Material Stainless Steel AISI 304 Stainless Steel AISI 316 Ball Seat R- (15%) R- (15%) 40 bar 40 bar Max. Operating Temperature -25/+180 C -25/+180 C -FLANGED: DN15 all sizes available in between DN100 BALL VALVE WITH MOUNTING PAD V-3TP Stainless Steel AISI 304 Stainless Steel AISI 316 Ball Material Stainless Steel AISI 304 Stainless Steel AISI 316 Ball Seat R- (15%) R- (15%) 40 bar 40 bar Max. Operating Temperature -25/+180 C -25/+180 C - THREADED: 1/2 all sizes available in between 4 BALL VALVES WITH MOUNTING PAD V-3FP Stainless Steel AISI 304 Stainless Steel AISI 316 Ball Material Stainless Steel AISI 304 Stainless Steel AISI 316 Ball Seat R- (15%) R- (15%) 40 bar 40 bar Max. Operating Temperature -25/+180 C -25/+180 C -FLANGED: DN15 all sizes available in between DN100 BRASS VALVES FOR WATER SK-120 Ms58 Ball Material Ni Coated Hand Lever St 37 Nominal Pressure(PN) Max. Operating Temperature 120 C -THREADED:
5 MONOBLOCK VALVES FOR NATURAL GAS MBK-50 Carbon Steel Ball Material Stainless Steel AISI 304 Ball Seat NBR 40 bar Max. Operating Temperature -40/+60 C -FLANGED: DN15 all sizes available in between DN100 MONOBLOCK VALVES FOR WATER MBK-40 Carbon Steel Ball Material Stainless Steel AISI 304 Ball Seat 40 bar Max. Operating Temperature -40/+110 C -FLANGED: DN15 all sizes available in between DN100 MONOBLOCK VALVES FOR LIQUIDS MBK-45 Carbon Steel Ball Material Stainless Steel AISI 304 Ball Seat 40 bar Max. Operating Temperature -40/+110 C -FLANGED: DN15 all sizes available in between DN100 FULL BORE BALL VALVE TGV-10 and Cover Material Ball Material Stainless Steel Ball Seat R- (15%) Max. Operating Temperature 120 C DN15 all sizes available in between DN200 FULL BORE BALL VALVE TGV-20 and Cover Material Ball Material Stainless Steel Ball Seat R- (15%) 6/10/ Max. Operating Temperature 120 C DN40 all sizes available in between DN300
6 WAFER TYPE BUTTERFLY VALVES KV-3 Liner Material Material Stainless Steel AISI 316 (Wafer Type) 10/ DN25 all sizes available in between DN300 for PN16 DN350 all sizes available in between DN600 for PN10 (comes with worm gear) LUG TYPE BUTTERFLY VALVES KV-4 Liner Material Material Stainless Steel AISI 316 (Lug Type) 10/ DN25 all sizes available in between DN300 for PN16 DN350 all sizes available in between DN600 for PN10 (comes with worm gear) WAFER TYPE BUTTERFLY VALVES KV-7 Liner Material Material Ni Coated Ductile Iron GGG 40.3 (Wafer Type) 10/ DN25 all sizes available in between DN300 for PN16 DN350 all sizes available in between DN600 for PN10 (comes with worm gear) LUG TYPE BUTTERFLY VALVES KV-8 Liner Material Material Ni Coated Ductile Iron GGG 40.3 (Lug Type) 10/ DN25 all sizes available in between DN300 for PN16 DN350 all sizes available in between DN600 for PN10 (comes with worm gear) WAFER TYPE BUTTERFLY VALVES FOR NATURAL GAS KV-9 Ductile Iron GGG 40.3 Liner Material NBR Material Ni Coated Ductile Iron GGG 40.3 (Wafer Type) 10/ Max. Operating Temperature 80 C DN25 all sizes available in between DN300 for PN16 DN350 all sizes available in between DN600 for PN10 (comes with worm gear)
7 WAFER TYPE BUTTERFLY VALVES FOR NATURAL GAS KV-10 Ductile Iron GGG 40.3 Liner Material NBR Material Ni Coated Ductile Iron GGG 40.3 (Lug Type) 10/ Max. Operating Temperature 80 C DN25 all sizes available in between DN300 for PN16 DN350 all sizes available in between DN600 for PN10 (comes with worm gear) WAFER TYPE BUTTERFLY VALVES KV-1 Material Material Ni Coated Ductile Iron GGG 40.3 (Wafer Type) Max. Operating Temperature 180 C WAFER TYPE BUTTERFLY VALVES KV-15 Ductile Iron GGG 40.3 Material Material Aluminium Bronze (Wafer Type) LUG TYPE BUTTERFLY VALVES KV-16 Ductile Iron GGG 40.3 Material Material Aluminium Bronze (Wafer Type) STRAINERS PTY-30 Ductile Iron GGG 40 Graphite+Acanthopore Plate Strainer Stainless Steel AISI 304 Filter Stainless Steel AISI bar Max. Operating Temperature 120 C 300 C DN15 all sizes available in between DN400 YS-600 BRASS STRAINER Ms58 Cover Ms58 Klingerit Filter Stainless Steel AISI 304
8 YS-800 FOR LIQUIDS STRAINER Stainless Steel AISI 304 Stainless Steel AISI 316 Screen Stainless Steel AISI 304 Stainless Steel AISI 316 Cap Stainless Steel AISI 304 Stainless Steel AISI bar 40 bar Max. Operating Temperature -25/+180 C -25/+180 C DYNAMIC BALANCE VALVES DBV-30 Ms58 Stainless Steel Diaphragm Max. Operating Temperature 120 C ASPEN AEROGELS VALVE JACKETS Fabric Material Glass Fiber Sewing Thread Glass Fiber Flange Ropes Glass Fiber Insulation Material Pyrogel XT/XTF (0.021 W/mK) Cryogel X201 (0.015 W/mK) Insulation Thickness 5mm-10mm (Optional) Max. Operating Temp. 650 C (Pyrogel XT/XTF) Min. Operating Temp C (Cryogel X201) DN15 all sizes available in between DN150 AYVAZ STATIC BALANCE VALVES BVD-16 Cover Shaft Max. Operating Temperature Bronze 25 bar +120 C AYVAZ STATIC BALANCE VALVES BVF-16 and Cover Cover Shaft (Flanges drilled according to EN ) Max. Operating Temperature +120 C DN65 all sizes available in between DN300
9 MANOMETER VALVES MV-330 and Cover Shaft Stainless Steel Valve Stainless Steel Seat Stainless Steel /2 25 bar Max. Operating Temperature 200 C MANOMETER VALVES MV-416 and Cover Shaft Stainless Steel Valve Stainless Steel Seat Stainless Steel /2 25 bar Max. Operating Temperature 200 C MANOMETER VALVES MV-417 and Cover Shaft Stainless Steel Valve and seat Stainless Steel Sealing 1/2 25 bar Max. Operating Temperature 200 C BRASS SAFETY VALVES SV-254 Seat Adjustable Pressure 1-10 bar Max. Operating Pressure Max. Operating Temperature 130 C PRESSURE REDUCING VALVE Ni Coated Adjustable Pressure 0-6 bar Nominal Pressure Max. Operating Temperature 90 C BRASS GATE VALVE Seat Max. Operating Pressure Max. Operating Temperature 120 C
10 BRONZE VALVES BRONZE GLOBE VALVE Bonnet Stem DZR CW602N Packing Nut CW617N Packing Stem Bush DZR CW602N 20 bar Max. Operating Temperature 170 C 1/2 all sizes available in between 4 BRONZE VALVES BRONZE GATE VALVE BRONZE VALVES BRONZE BALL VALVE Bonnet Stem DZR CW602N Packing Nut CW614N Packing Clamping Ring CW614N 20 bar Max. Operating Temperature 170 C 1/2 all sizes available in between 4 Seat Retainer Ball CW617N Seat Stem DZR CW602N Packing Gland Nut CW617N 20 bar Max. Operating Temperature 170 C BRONZE VALVES BRONZE CHECK VALVE Cap Hinge CW617N Hinge Pin Stainless Steel 2Cr13 Hinge Nut CW617N 20 bar Max. Operating Temperature 170 C BRONZE VALVES BRONZE STRAINER Cap Screen Stainless Steel AISI bar Max. Operating Temperature 170 C BELLOW VALVES MK-16 A C F Grey Cast Iron EN-GJL-250 Nodular Cast Iron EN-GJS-400 Cast Steel Seat Ring X12Cr13 X12Cr13 - X12Cr13 X12Cr13 X20Cr Bellow X6CrNiMoTi X6CrNiMoTi X6CrNiTi Connection Max. Temperature 300 C 350 C 400 C Max. Pressure 25 bar 40 bar Nominal Diameter DN DN DN Tests acc. EN Flanges drilled according to EN for body material A, C Flanges drilled according to EN for body material F Face-to-face dimension according to EN series 1
11 BRONZE SAFETY VALVES L9-LB Cast Bronze Seat Forge Forge Spring Steel Sleeve Operating Pressure kgf/cm2 Operating Temperature - 45 C / 185 C STAINLESS STEEL SAFETY VALVES L9-LS Stainless Steel CF8 Seat Stainless Steel 304 or CF8 Stainless Steel 304 or CF8 Spring Stainless Steel 304 Sleeve Stainless Steel 304 Operating Pressure 0,3-2 kgf/cm2-2,1-10 kgf/cm kgf/cm2 Operating Temperature C / 290 C 1/2-3/4 Angled and straight types are available KNIFE GATE VALVE BV-16 O-Ring Sealing Stem Sealing Ring Seat Ring Knife Graphite A182 F304 GGG-40 SS304 GGG-40 DN50 all sizes available in between DN400 WORM GEAR Epoxy coated Ductile Iron GGG 40.3 Diameters DN ISO 5211 Max. Operating Temperature -20/+70 C DOUBLE ACTING PNEUMATIC ACTUATOR Epoxy Coated Aluminium Injection Pistons Aluminium Cast Shaft Material Cadmium Coated Steel Tightness Component Nitrile Rubber Valve Connection Standard ISO 5211 Max. Operating Temperature -20/+80 C ELECTRIC ACTUATORS UMA 3.5 UMC 10 Aluminium TYPE Plastic AA 66 Plastic AA 66 Aluminium Cover Plastic AA 66 Plastic AA 66 Steel Axis Chrome Steel Chrome Steel Bronze Alloy Connection Nominal Diameters DN DN DN Max. Operating Temp. -20/+70 C -20/+70 C -20/+70 C
12 HEAD OFFICE - FACTORY Atatürk Sanayi Bölgesi Hadımköy Mahallesi Mustafa İnan Caddesi No: 44 Arnavutköy - İSTANBUL Tel: (pbx) Fax: Caserta/Italy Tel: rmolaro@ayvaz.com Moscow/Russia Tel: ayvazrus@ayvaz.com Viernheim/Germany Tel: germany@ayvaz.com Kiev/Ukraine Tel: info@ayvaz.com.ua Warsaw/Poland Tel: tricorr@tricorr.eu Dubai/U.A.E Tel: mideast@ayvaz.com Xiamen/China Tel: shanghai@ayvazchina.com xiamen@ayvazchina.com Kazakhstan Tel: +7 (701) (533) celyas@ayvaz.com Isperih/Bulgaria Tel: office@ayvaz-n.eu info@ayvaz.com
LEVEL CONTROL 3
LEVEL CONTROL info@ayvaz.com www.ayvaz.com 3 LEVEL CONTROLLERS LEVEL CONTROLLERS FOR STEAM BOILERS FANTINI COSMI LEVEL REGULATORS Body Ductile Iron GGG 40.3 Stainless Steel AISI 316 Teflon Coated (Optional)
KV-3 BUTTERFLY VALVE/WAFER TYPE GENERAL FEATURES
KV-3 BUTTERFLY VALVE/WAFER TYPE GENERAL FEATURES The closing element in the butterfly valves is a rotating shaft that is placed on a vertical axis. The sealing is provided between the metal flap and the
FIRE PROTECTION PRODUCTS
FIRE PROTECTION PRODUCTS Rev.0119 6 info@ayvaz.com www.ayvaz.com 1 FIRE PROTECTION PRODUCTS ANGULAR EXPANSION JOINTS GIMBAL TYPE SEISMIC EXPANSION JOINTS Bellow Material Stainless Steel AISI 321 (Opt.
Cast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
flowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)
flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
Hattersley Newman Hender Ltd
Product Guide Quality Valves from Hattersley WHEN IT REALLY COUNTS, YOU CAN DEPEND ON HATTERSLEY Hattersley Newman Hender is one of the world s premier manufacturers of cast iron, ductile iron and copper
Concentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
WAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm
WAFER TYPE BUTTERFY VAVE SPECIFICATION FOR BS EN 1092-2 PN10 / PN16 FANGE MOUNTING FACE-TO-FACE DIMENSION TO ISO 5752 / BS 5155 / BS EN 593 EVER / WORM GEAR OPERATOR PRESSURE / TEMPERATURE RATINGS BFV-WB
WAFER STYLE KNIFE GATE VALVE
MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut
OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS
AVK FLOW CONTROL OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS InterApp World Valve Wouter Witzel TEC artec AVK 1 2 AVK FLOW CONTROL l OIL & GAS PLANTS CONTENT: AVK FLOW CONTROL 4-5 OFFSHORE PRODUCTION
Technical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²
WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
Type / Material code Body* Disc Stem Lining**
Design butterfly valve is designed with lug or flange connection. Lug connection in dimensions DN 32-300, flange connecton DN 300-1000. is available in pressure ratings PN 10 /16 according to dimension.
VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
L15 HEAVY DUTY KNIFE GATE VALVE STANDARD PARTS LIST
L15 HEAVY DUTY KNIFE GATE VALVE The L15 model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body
CLASS 400 FORGED BRASS BALL VALVE
CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:
KNIFE GATE VALVES -- MODEL A
PRODUCT DESCRIPTION Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. Several seat
BI-DIRECTIONAL KNIFE GATE VALVE
BI-DIRECTIONAL KNIFE GATE VALVE The model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging
BUTTERFLY VALVE - WAFER FAF 3500
PRODUCTION STANDARDS DN40 DN600 PN 6-10-16 CLASS 150 Design EN 593 Connection Wafer Type ISO 7005-1 EN 1092-1 Face to Face EN 558 Series 20 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
Valves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...
Valves for building Ball valves PN25/20... page 194 PN30/20... page 195 PN40/30 - Lead-free brass... page 196 Valve for gas... page 197 Stem extension valves... page 197 3 way valves... page 197 Mini valves...
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
AVK TOTAL CONTROL INSIDE BUILDINGS GENERAL VALVES FOR BUILDING
AVK TOTAL CONTROL INSIDE BUILDINGS GENERAL VALVES FOR BUILDING SERVICE MEMBER OF THE GROUP GATE VALVE RESILIENT SEATED FULLY VULCANIZED WEDGE Product series: S02, S21, S06, S15, S55 Rising stem/non rising
HELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
V A L V E S. rice List of. Controlling fluids is our expertise TERMS & CONDITIONS : An ISO:9001 Co. PRICE LIST NO. : JMW / 3 0 W.E.
V A L V E S Controlling fluids is our expertise TERMS & CONDITIONS : This cancels our all previous issues. All prices are Ex. works, Jalandhar. Excise duty will be charged extra as applicable (presently
Valves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...
Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265
XV en /5 XV Knife gate valve DN
-80-800-en-04 1/5 The Stafsjö knife gate valve is a compact bi-directional valve with full bore. The valve is specially designed with regard to good flow characteristics and simple maintenance which makes
Data sheet Knife gate valve WB PN10 DN
Page: 1(7) Introduction The Stafsjö WB knife gate valve is a bi-directional seated valve with full bore. Its main applications are different liquids at water, waste water and biogas plants. The WB is designed
Manual valves. automatic meters and valves
Manual valves automatic meters and valves Butterfly valves manual valves Advanced technical design 1. Robust and lightweight leverage system. Ergonomic design. Protection of gear mechanism.. Flange fitting
PRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3
BUTTERFLY VALVES PRZEPUSTNICE TYPE DESCRIPTION NOMINAL PRESSURE TEMPERATURE DIAMETER STANDARD PAGE B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 B-099 Centric butterfly valve
Product Catalogue November 2017
Product Catalogue November 207 Manual and Actuated Valves It s all at Albion Contents Brass 4 Ball Valves Way Valves Check Valves Gate Valves Strainers Press Valves 9 Ball Valves Check Valves Strainer
HEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The model knife gate is an uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body and
Description. Functions. Technical data. Applications. Tests. Level control float valve, enabling the control of the filling level.
Level control float valve, enabling the control of the filling level. Description For general information concerning the operation of a Hydrobloc control valve, please consult our general manual (series
Stainless Steel / Iron Valve ISO 9001
CAST IRON GATE VALVE CLASS 125 NON-RISING STEM. (N.R.S.) STEM: SS410 (BRASS / SS304) MODEL: CI-12N (CI-12N/CI-2NS) CAST IRON GATE VALVE CLASS 125 OUTSIDE SCREW AND YOKE. STEM: SS410 (BRASS / SS304) MODEL:
Pressure reducing valve Pressure reducing valve in straightway form DN
Pressure reducing valve Pressure reducing valve in straightway form DN 15-150 ARI-PREDU Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Grey cast
BI-DIRECTIONAL KNIFE GATE VALVE
Wastewater treatment plants Food and Beverage Chemical plants Sizes: Working pressure: DN 2"/ 50mm to DN 10"/ 250mm DN 12"/300mm to DN 16"/ 400mm DN 18"/450mm DN 20"/500mm to DN 24"/ 600mm DN 28"/700mm
Wafer, Semi Lug, Lug and Flanged Type
Year : Wafer, Semi Lug, Lug and Flanged Type Page 1 Year : Specification Description : GVC concentric rubber lined butterfly valves suitable for bi-directional flow and bubble tight shut-off at full rated
KNIFE GATE VALVES -- MODEL D
PRODUCT DESCRIPTION Flanged unidirectional knife gate valve for high pressure applications One piece integral cast body with seating wedges and bolted bonnet. High flow rates with low pressure drops. Several
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
UNI-DIRECTIONAL KNIFE GATE VALVE
UNI-DIRECTIONAL KNIFE GATE VALVE The MU-CYL model knife gate is a Uni-directional valve, equipped with automatic or manual driver, that by its loose elastomeric clamping ring design (tight version) ensures
Cast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
STEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
PNEUMATIC ACTUATED GLOBE VALVES TORK LV 3000 SERIES
fluid fluid under under control PNEUMATIC ACTUATED GLOBE VALVES TORK LV 3000 SERIES TORK LV 3000 SERIES SO RELIABLE YOU COULD FORGET WHERE, WHEN, HOW IT WORKS. TORK LV 3000 SERIES A NEW CONTROL VALVE
THROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice
THROUGH CONDUIT KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or
Established in 1982, Modentic Industrial Corporation is involved in the world of stainless steel valves & fittings selling.
Modentic Industrial Corp. ISO 9001 Certified. Established in 1982, Modentic Industrial Corporation is involved in the world of stainless steel valves & fittings selling. Contents A view of valve process
MADE OF STAINLESS... Certificate 3.1
MADE OF STAINLESS... Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1200 Between flanges PN6,PN10/16,Class 150,JIS10K* -10 C + 110 C ( 130 C temporarily ) Max Pressure
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-01 (Rev. 02/2016)
General Description The model FKB VGU-01 is developed in accordance with MSS-SP 81 Standard and its function is blocking the fluid sewage. They are light equipments for semi-lug body and flange installation,
UNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
Excess pressure regulator Excess pressure regulator, straight through DN
ARI-PREDEX Excess pressure regulator Excess pressure regulator, straight through DN 15-150 ARI-PREDEX Excess pressure regulator, straight through with diaphragm actuator UDA Actuator with rolling diaphragm
RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
Series 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
NON RETURN BRASS FLANGED AGA GAS APPROVED
NON RETURN BRASS FLANGED AGA GAS APPROVED ACTUATED MARINE STAINLESS STEEL 34 VALVES 36... BRASS BALL VALVES 37... AGA GAS APPROVED VALVES GATE VALVES 38... BRASS VALVES 39... RUBBER BELLOW, HOSECOCKS &
BUTTERFLY VALVE VF-7 Series
BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm
Dual Plate Check Valve
Dual Plate Check Valve Belgicast Model C Ruber-Check Dual plate check valve Wafer type 40/1200 PN 10/16/25/40 Features: Dual plate check valve with soft wafer type seat for fitting between flanges. For
STEVI 450 / way control valve in mixing and diverting design DN
STEVI 450 / 451 with electric and pneumatic actuators 3-way control valve in mixing and diverting design DN 15-150 STEVI 450 / 451 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel
Knife gate valves Index
Index General information page Introduction 144 Product information page ast Iron/SS; Uni-directional 146 ast Iron/SS; i-directional; Throught conduit 147 ast Iron/SS; i-directional 148 ast Iron/SS; Silo
WAFER BUTTERFLY VALVE
WAFER BUTTERFLY VALVE model 1123 Size: DN 32/40 to DN 1200 Ends: Between flanges PN 10/16, Class 150 up to DN 600 Min Temperature: -10 C Max temperature: +110 C (130 C temporarily) Max pressure: 16 Bars
Angle Seated Valves. ecoflo-as. Angle Seated Valves
Angle Seated Valves ecofloas Angle Seated Valves AngleSeat Valves PNEUMATIC AND ELECTRIC VALVES PN / PN / PN / ANSI 0 / ANSI 00 series pneumatic and electric valves are designed as onoff or reglation valves
CHECK VALVES. MOUNTING: - flow direction marked with arrow on body; - mounting position in conformity with the technical sheet recommendation.
CHECK VALVES RR page 1 R MAIN APPLICATIONS: Transport and distribution of : - cold and hot industrial water; - saturated vapours; - petroleum products; on condition that the compatibility regarding the
STEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
Soft sealing gate valves F4-F5 PN16. TYPE 02400/BV Soft sealing gate valve F4-F5 PN16
SLES SERVICE +8 (0)7 6 info@econosto.fi TYPE 000 DN0-0 TYPE 000 DN0-00 Soft sealing gate valves Nominal diameter options (DN) 0-00 Nominal pressure options (PN) 6 TYPE 000/BV-0-7 Soft sealing gate valve
Series 9210 High Performance Butterfly Valves for ANSI
Series 9210 High Performance Butterfly Valves for ANSI 150-300 70-16-13-05 EN REV. 3 11/15 Page 1 of 8 Specification Series 9210 High Performance Butterfly Valves for ANSI 150-300 DIN/BS 4504 PN10-PN50
CENTRIC BUTTERFLY VALVES
CENTRIC BUTTERFLY VALVES RFC page 1 F MAIN APPLICATION : Transport and distribution of: - cold and hot industrial water; - saturated vapours; - petroleum products; - fluids charged with solid particles
SQUARE PORT KNIFE GATE VALVE
SQUARE PORT KNIFE GATE VALVE The model knife gate is a square port low-pressure valve for highly solid loaded fluids or solids, mainly used in bulk handling and silo outlet applications in industries such
Non Return Valves.
Non Return Valves Table of contents Product information Type 4010 & 4010HD Type 4010, with lever and weight Type 4010 HD, with lever and weight + hydraulic damper Type 4020, slanted seat with/without damper
Maintenance-free metallic seat shut-off globe valves
Type leaflet 7150.1/5-10 BOA R -H Maintenance-free metallic seat shut-off globe valves with bellows flanged to new European standard 1092-2 type 21 Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16
RAIMONDI. High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services.
Fig. 6022-6025 RAIMONDI High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services. Features Forged body materials of highest quality, all in compliance with ASME
LATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
Motorized Butterfly Valve Actuated Wafer type butterfly valves
Motorized Butterfly Valve Actuated Wafer type butterfly valves FEATURES PRODUCT DATA Wide size range (DN 50 DN600) For On-Off or Modulating Control Manual override non-clutch design. Manual operation can
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES KGV XD-PRE SERIES FULLY LUGGED WITH RISING STEM & HANDWHEEL KGV XD-PRE SERIES FULLY LUGGED WITH D/A PNEUMATIC ACTUATOR KGV XD-PRE SERIES FULLY LUGGED WITH
BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg
B C D BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B AD AS AD C D F Kg AS C
BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH RISING STEM & HANDWHEEL KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR KGV-XD FULLY LUGGED WITH BONNET & HADNWHEEL The XD model knife gate is a Bi-directional
KNIFE GATE VALVE Product Ref. : KG02W/KG02L
General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective
BALL VALVE - 10 SERIES Electric actuator - El-O-Matic
DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25
HEAVY DUTY KNIFE GATE VALVE. ANSI B16.5 (class 150) and DIN PN 10
HEAVY DUTY KNIFE GATE VALVE The SERIES knife gate is a uni-directional lug type valve designed according to the MSS-SP-1 and TAPPI TIS 405- standard for industrial service applications. The design of the
Maintenance-free metallic seat shut-off globe valves
Type leaflet 7150.1-10 BOA-H R Maintenance-free metallic seat shut-off globe valves with bellows flanged to new European standard 1092-2 type 21 Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16 DN
ptfe seated 30 years of high quality experience
ptfe seated BUTTERFLY VALVES ed TT Series 1 technical data 1 components DN 50-300 Stainless steel disc Stainless steel + PTFE disc 3 tables components DN 350-500 dimensions 5 torque values 6 Installation
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
OPTIMAL VALVE SOLUTIONS PRODUCT PROGRAM
FLOW CONTROL OPTIMAL VALVE SOLUTIONS PRODUCT PROGRAM World Valve Wouter Witzel 1 FLOW CONTROL l PRODUCTS CONTENT: FLOW CONTROL 4-5 BUTTERFLY VALVES 6-7 BALL VALVES 8 GATE- AND GLOBE VALVES 9 KNIFE GATE
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 600 Between flanges PN10/16-15 C + 110 C ( 130 C C temporarily) Max Pressure : 16 Bars up to DN300, 10 bars over Specifications
KVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
Valves Range RVRX - Resilient Seated Gate Valve PN16 Flange
Valves Range RVRX - Resilient Seated Gate Valve PN16 Flange No Component Material 1 Body Ductile iron GGG40 2 Wedge DI Fully Vulcanised EPDM 3 Wedge Nut Brass 4 Stem SS420 5 Bolt Q235+Zinc 6 Gasket EPDM
BIDIRECTIONAL WAFER Knife Gate Valve
09/03/2016 BIDIRECTIONAL WAFER Knife Gate Valve Bidirectional wafer design knife gate valve. Monoblock one piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with
P R O D U C T R A N G E
PRODUCT RANGE OVERVIEW Range of Materials AUSTRALIAN PIPELINE VALVE BRAND Australian Pipeline Valve (APV) manufactures a complete Cast iron, Ductile iron (GGG40) range of ASME, API, BS and AS valves such
Butterfly valves. Technical features 11 Coupling 12 Elements list 12 Tables 13 torque values 13 dimensions 15
TT series valve TT Series 1 technical data 1 components DN 50-300 Stainless steel disc Stainless steel + PTFE disc 3 components DN 350-500 Tables 5 dimensions 5 torque values Installation instructions
Valve Solutions for the Bulk Material Industry
Valve Solutions for the Bulk Material Industry SUCCESS STORY Plant name & location: Tronox, llc. Hamilton, Ms Application: Ore Silo Inlet Media: Titanium Rutile Ore Tronox, llc., formerly Kerr McGee Chemical
Trunnion Ball Valve Catalogue
Trunnion Ball Valve Catalogue Introduction "Fusion" is the registered trademark of Archmetal Industries, a member of the Fortune Group. * The Fortune Group is a world class producer of a full range of
Motorized Butterfly Valve
Motorized Butterfly Valve Actuated butterfly valves PRODUCT DATA FEATURES Wide size range (DN 50 500) For On-Off Control with feedback signal Manual override Hand-Wheel design. Manual operation can be
General information. Marking ISO 5209:... General purpose industrial valves. Marking (Equivalent to EN 19)
FIVC Butterfly valves are designed by European standards. Enclosed a list of references that fulfil complete or partially depending of each case. Valve dimensions UNE-EN 593:... Industrial valves. Metallic
Butterfly valves. Introduction. Made of ductile cast iron
Made of ductile cast iron Introduction The portfolio of valves supplied by Keulahütte GmbH in Krauschwitz is rounded off by butterfly valves and check valves, which have been designed according to international
ASME Classes /2 24 ( mm) Class /2 1 1 /2 (15 40 mm)
ASME Classes 150 300 1 /2 24 (15 600 mm) Class 800 1 /2 1 1 /2 (15 40 mm) PROFILE Velan is one of the world's leading manufacturers of industrial valves, supplying forged and cast steel gate, globe, check,