3,49 cc ,88 x 17,60 9 Ø 14,5 mm. Steel. Steel. Slide - 9mm Aluminium Double 336 g. Also available with front and rear ceramic ball bearings
|
|
- Hilary Rafe Maxwell
- 6 years ago
- Views:
Transcription
1 Displacement Max Power R.P.M. Bore x Stroke (mm.) Sleeve n. Ports Crankshaft Rear Ball Bearings Front Ball Bearings Carburettor Type Carburettor Material Carb. Adjustment Weight Slide - 9mm Aluminium Double 336 g 3,49 cc ,88 x 17,60 9 Ø 14,5 mm Also available with front and rear ceramic ball bearings 4
2 The new ball bearing reduces the inertia of the rotating masses and increases the engine s scavenging. These novelties give an increased throttle response and a higer top speed. The new three tuning needles gives a better idle and improves the ability of the engine to return to low rpm after throttling. engines LINE R EXPLODED VIEW LEGEND 9 ON NEW COOLING HEAD NOVAROSSI WORLD S.r.l. Via Europa, 20/A Monticelli Brusati (BS) - ITALIA web: info@novarossi.it Tel / Fax: / I disegni sono puramente indicativi / Drawings are just indicative. Polished pipe with ring, 3 chambers, this tuned pipe is more progessive with lower fuel consumption. EFRA Conical short EFRA Conical medium Polished pipe with ring, 3 chambers, more acceleration, higher top speed, high fuel consumption Conical long Data ultima modifica: Date of last modification: * CARBURETTOR CODE: A A A Optional Ø8.00mm Ø8.50mm Ø9.00mm 03003XL 0.20 mm / XL 0.10 mm 08001/ / C8TGT / XL 0.30 mm XL 0.30 mm * PN Pipes Recommended (EFRA 2006) (EFRA 2015) With ring, 3 chambers With ring, 3 chambers Manifolds Recommended Conical short, 2 rings Conical medium, 2 rings 5
3 Displacement Max Power R.P.M. Bore x Stroke (mm.) Sleeve n. Ports Crankshaft Rear Ball Bearings Front Ball Bearings Carburettor Type Carburettor Material Carb. Adjustment Weight Slide - 9mm Aluminium Double 336 g 3,49 cc ,88 x 17,60 7 Ø 14,5 mm Also available with front and rear ceramic ball bearings 6
4 The new ball bearing reduces the inertia of the rotating masses and increases the engine s scavenging. These novelties give an increased throttle response and a higer top speed. The new three tuning needles gives a better idle and improves the ability of the engine to return to low rpm after throttling. engines LINE R EXPLODED VIEW LEGEND 7 ON NEW COOLING HEAD NOVAROSSI WORLD S.r.l. Via Europa, 20/A Monticelli Brusati (BS) - ITALIA web: info@novarossi.it Tel / Fax: / I disegni sono puramente indicativi / Drawings are just indicative. Polished pipe with ring, 3 chambers, this tuned pipe is more progessive with lower fuel consumption. EFRA Conical short EFRA Conical medium Polished pipe with ring, 3 chambers, more acceleration, higher top speed, high fuel consumption Conical long Data ultima modifica: Date of last modification: * CARBURETTOR CODE: A A A Optional Ø8.00mm Ø8.50mm Ø9.00mm 03003XL 0.20 mm / XL 0.10 mm 08000/ / C8TGT / XL 0.30 mm XL 0.30 mm * PN Pipes Recommended (EFRA 2006) (EFRA 2015) With ring, 3 chambers With ring, 3 chambers Manifolds Recommended Conical short, 2 rings Conical medium, 2 rings With ring, 3 chambers Conical long, 2 rings
5 Displacement Max Power R.P.M. Bore x Stroke (mm.) Sleeve n. Ports Crankshaft Rear Ball Bearings Front Ball Bearings Carburettor Type Carburettor Material Carb. Adjustment Weight Slide - 6,5mm Aluminium Single 227 g 2,10 cc ,70 x 14,25 3 Ø 11,9 mm Also available with front and rear ceramic ball bearings 8
6 The new ball bearing reduces the inertia of the rotating masses and increases the engine s scavenging. These novelties give an increased throttle response and a higer top speed. NEW COOLING HEAD Polished pipe with ring, 2 chambers, conical tube, New generation tuned pipe for more efra 2652 top speed efra 2660 Polished pipe with ring, 2 chambers, conical tube, New Generation tuned pipe with improved acceleration Conical short Conical medium conical long 9
7 Displacement Max Power R.P.M. Bore x Stroke (mm.) Sleeve n. Ports Crankshaft Rear Ball Bearings Front Ball Bearings Carburettor Type Carburettor Material Carb. Adjustment Weight 2,10 cc ,70 x 14,25 3 Ø 11,9 mm Slide - 6,5mm Aluminium Single 227 g Also available with front and rear ceramic ball bearings 10
8 The new ball bearing reduces the inertia of the rotating masses and increases the engine s scavenging. These novelties give an increased throttle response and a higer top speed. NEW COOLING HEAD Polished pipe with ring, 2 chambers, conical tube, New generation tuned pipe for more efra 2652 top speed efra 2660 Polished pipe with ring, 2 chambers, conical tube, New Generation tuned pipe with improved acceleration Conical short Conical medium conical long 11
9 Displacement Max Power R.P.M. Bore x Stroke (mm.) Sleeve n. Ports Crankshaft Rear Ball Bearings Front Ball Bearings Carburettor Type Carburettor Material Carb. Adjustment Weight Slide - 9mm Plastic Single - Reverse 370 g 3,49 cc ,88 x 17,60 7 Ø 14,5 mm Also available with front and rear ceramic ball bearings 12
10 The new ball bearing reduces the inertia of the rotating masses and increases the engine s scavenging. These novelties give an increased throttle response and a higer top speed. The new three tuning needles gives a better idle and improves the ability of the engine to return to low rpm after throttling. NEW COOLING HEAD CARBURETTOR CODE: Reverse C6TGC /7 Data ultima modifica: Date of last modification: Polished pipe with ring, 3 chambers, 51006M reinforced tube. EFRA 9901 EFRA Long Polished pipe with ring, 3 chamber, super strong, more manageable engine power Short L A Optional 03001XL Ø6.0mm 0.10 mm / T * A Ø5.4mm * T A A Ø6.5mm Ø7.0mm XL 0.20 mm 03005XL 0.30 mm 03005XL mm Reverse BN 13
11 Displacement Max Power R.P.M. Bore x Stroke (mm.) Sleeve n. Ports Crankshaft Rear Ball Bearings Front Ball Bearings Carburettor Type Carburettor Material Carb. Adjustment Weight Slide - 9mm Plastic Single - Reverse 360 g 3,49 cc ,26 x 16,80 4 Ø 14 mm Also available with front and rear ceramic ball bearings 14
12 The new ball bearing reduces the inertia of the rotating masses and increases the engine s scavenging. These novelties give an increased throttle response and a higer top speed. The new three tuning needles gives a better idle and improves the ability of the engine to return to low rpm after throttling. NEW COOLING HEAD CARBURETTOR CODE: Reverse C6TGC /4 Data ultima modifica: Date of last modification: Polished pipe with ring, 3 chambers, 51006M reinforced tube. EFRA 9901 EFRA Long Polished pipe with ring, 3 chamber, super strong, more manageable engine power Short L A A A A Optional mm mm mm Ø5.4mm Ø6.0mm Ø6.5mm Ø7.0mm / mm 08002/ / * * mm 0.30 mm Reverse BN 15
13 Displacement Max Power R.P.M. Bore x Stroke (mm.) Sleeve n. Ports Crankshaft Rear Ball Bearings Front Ball Bearings Carburettor Type Carburettor Material Carb. Adjustment Weight Slide - 9mm Plastic Single - Reverse 374 g 4,04 cc ,10 x 17,60 7 Ø 14 mm Also available with front and rear ceramic ball bearings 16
14 The sleeve has 7 transfer ports and an exhaust with booster ports. The special shape and positioning of the ports, covered by a patent, improve the internal fluid-dynamics to obtain the maximum possible performance. The crankshaft is grinded to increase the mixture flow and has a special shape to reduce turbulences inside the crankcase. This a Lighter&Lower evolution 2 type of cooling head. It is drilled and milled out to reduce the mass of the coolinghead which sits high up in the car and thereby lowering the Center of Gravity of the engine/car. The rear cover presents a round shape to optimize the filling and reducing the dead spaces. the steel plate is to reduce friction and to expand the lifespan of the conrod. engines LEGEND.25 The inner shape of the gasket has a new shape, and with that more material. Together with a change in material these gaskets are more resistant to high temperatures. Data ultima modifica: Date of last modification: CARBURETTOR CODE: C6TGC Polished pipe with ring, 3 chambers, 51006M reinforced tube. EFRA 9901 EFRA 2096 Polished pipe with ring, 3 chamber, super strong, more manageable engine power mm mm Long Short L * mm mm 6.5 mm mm mm * Optional mm REVERSE / N 17
15 4,66 cc ,35 x 17,60 7 Slide - 9mm Plastic Single - Reverse 363 g Displacement Max Power R.P.M. Bore x Stroke (mm.) Sleeve n. Ports Crankshaft Rear Ball Bearings Front Ball Bearings Carburettor Type Carburettor Material Carb. Adjustment Weight Slide - 9mm Plastic Single - Reverse 363 g 4,66 cc ,35 x 17,60 7 Ø 14 mm Also available with front and rear ceramic ball bearings 18
16 The glowplug of engine is a Turbo type glowplug. Turbo glowplugs have a different shape than Standard glowplugs and therefor are not interchange able with engines that are using Standard glowplugs! The new tuned crankshaft gives the engine a better balancing. This will reduce the vibration produced by the rotating and the alternating masses. The sleeve has 7 transfer ports and an exhaust with booster ports. The special shape and positioning of the ports, covered by a patent, improve the internal fluid-dynamics to obtain the maximum possible performance. CARBURETTOR CODE: (REVERSE) C6TGC EFRA 9901 Polished pipe with ring, 3 chambers, super strong, and engine more driveable EFRA 2096 Polished pipe with ring, 3 chamber, the most popular pipe mm mm Long Short L Optional: mm mm mm mm mm mm Data ultima modifica: Date of last modification:
Prices are subject to change without notice.
Page 1 of 5 Soar 25 32139 Spenge/Germany Telefon ++49 (0)5225-859256 Fax ++49 (0)5225-859257 Email Internet www.gw-racing-parts.de suggested retail price, list valid from 01.02.2011 Cylinder bore, debure
More informationUSA SUPER SHIFTER 175cc
USA SUPER SHIFTER 175cc FEATURES Cylinder volume 174.46 cm³ (Max 176.6 cm³) Bore 63.90 mm Max. theoretical bore 64.26 mm Stroke 54.40 mm Distance between conrod centers 115 mm Cooling system Water Inlet
More informationMotorsport South Africa
Motorsport South Africa SOUTH AFRICAN KARTING COMMISSION HOMOLOGATION SCHEDULE MAXTERINO MX-60 Version 1 2017-01-25 MSA Ref. Manufacturer MAXTER S.R.L. Distributor Ed Murray Racing cc Model Maxterino Period
More informationHOMOLOGATION OF KART ENGINE PROVISIONAL
HOMOLOGATION OF KART ENGINE Category MSA Cadet Manufacturer IAME Model Parilla Gazelle 60cc U.K. Valid From 01 January 2013 Number of pages of main fiche 16 This Homologation Form reproduces descriptions,
More information100cc REEDJET USA TaG
100cc REEDJET USA TaG FEATURES Cylinder Volume 100 cm³ max Bore 48.20 mm Max. theoretical bore 48.53 mm Stroke 54.05 mm max Cooling system Air Inlet system Reed valve Number of carbs 1 Tillotson Carburettor
More information2006 MINI Cooper ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) Engine - Technical Data - Cooper (W10) & Cooper S (W11)
ENGINE, GENERAL 11 00 ENGINE IN GENERAL 2002-08 ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) ENGINE IN GENERAL Cylinder 4 Bore mm 77 (3.03) Stroke mm 85.8 (3.377) Effective displacement
More informationTECHNICAL DATA. COMPRESSION RATUI 9,5/1 WEIGHT ready to fly CONSUMPTION at 5400RPM 5,6litres/h POWER at 6200RPM
VICTOR 1 SUPER This handbook aims to bring to the attention of key technical, functional and maintenance of your motor VICTOR 1. Read carefully the following pages, will be synonymous with safety, reliability
More informationENGINE. IAME SPA IAME KA cc REEDJET AUS TaG 6 Years 28
ENGINE Manufacturer Make Model Validity of the homologation Number of pages IAME SPA IAME KA 100-100cc REEDJET AUS TaG 6 Years 28 This Homologation Form reproduces descriptions, illustrations and dimensions
More informationPARILLA LEOPARD RL 125 TECHNICAL SPECIFICATIONS
PARILLA LEOPARD RL 125 VERSION 4 / 2012 UPDATED September 6 th, 2012 DOCUMENT UPDATE SCHEDULE It is certified that the updates listed below have been approved by the Australian Karting Association and
More information334A or 334AB. Number of piston rings 1 Number of exhaust ports 2. Big end conr. Ball-bearing diam. 18X24X15 Combustion chamber shape Spherical
125cc LEOPARD FEATURES Cylinder volume 123.67 cc Bore 54 mm Max. theoretical bore 54.28mm Stroke 54mm Cooling system Water Inlet system Reed valve Number of carbs 1 Tillotson HL Carb. 334A or 334AB Cylinder/crankcase
More informationPARILLA LEOPARD X TECHNICAL SPECIFICATIONS
PARILLA LEOPARD X30 125 VERSION 7 / 2013 UPDATED JULY 16 th, 2013 DOCUMENT UPDATE SCHEDULE It is certified that the updates listed below have been approved by the Australian Karting Association and have
More informationNATIONAL HOMOLOGATION FORM KARTING ENGINE
NATIONAL HOMOLOGATION FORM KARTING ENGINE Manufacturer TORINI MOTOR CO., LTD. Make TORINI Model CLUBMAXX 210 (TC210) Validity of the homologation 6 years Number of pages 34 Homologation N This Homologation
More informationMINI ROK 2016 IDENTIFICATION SHEET
IDENTIFICATION SHEET This Identification Sheet reproduces descriptions, illustrations and dimensions of the MINI ROK engine to be used in the MINI ROK CUP recognised by Motorsport South Africa PICTURE
More informationDIMENSIONS. Oil Capacity = 14.6 oz Maximum Fluid Temperature = 140 F Inlet Thread = 1/2 F Discharge Thread = 3/8 F
Plunger Pumps XMA 1750 RPM E VERSION 1 1/8 WITH NEMA 182-184 FLANGE FEATURING MANIFOLD: High strength forged brass for long term use. DIMENSIONS BOLTS: Eight 6mm grade 12.9. PLUNGERS: A special thick solid
More informationCOMER SW80 TECHNICAL SPECIFICATIONS
UPDATED JANUARY 2012 Preamble: SW 1.01 SW 1.02 The following are the Technical Specifications for the engine, as approved by the Australian Karting Association. This engine is approved for use in the CADET
More informationNATIONAL HOMOLOGATION FORM KARTING ENGINE
NATIONAL HOMOLOGATION FORM KARTING ENGINE Manufacturer BRIGGS & STRATTON Make BRIGGS & STRATTON Model 206-124332 Validity of the homologation 6 years Number of pages 25 This Homologation Form reproduces
More informationCOMER SW80 TECHNICAL SPECIFICATIONS
COMER SW80 TECHNICAL SPECIFICATIONS Comer SW80 Toowoomba % LV Tech Spec 2017 Preamble: The following are the Technical Specifications for the COMER SW80 engine, as approved by the Australian Karting Association.
More informationINDEX TECHNICAL SPECIFICATIONS 2 SPECIAL TOOLS 3-4 PERIODIC MAINTENANCE 5 LUBRICANTS 6 TROUBLESHOOTING 7-14 TIGHTENING TORQUE TABLE 15
INDEX TECHNICAL SPECIFICATIONS 2 SPECIAL TOOLS 3-4 PERIODIC MAINTENANCE 5 LUBRICANTS 6 TROUBLESHOOTING 7-14 TIGHTENING TORQUE TABLE 15 ENGINE DISASSEMBLY 16-24 ENGINE REASSEMBLY 25-37 SPECIAL 3-SHOE CLUTCH
More informationMachinery I Spares I Consumables (Specialist suppliers to Tool Hire & Garden Machinery Dealers) LFE152F Parts List.
Machinery I Spares I Consumables (Specialist suppliers to Tool Hire & Garden Machinery Dealers) LFE152F Parts List Date: October 2014 Machinery I Spares I Consumables (Specialist suppliers to Tool Hire
More informationNATIONAL HOMOLOGATION FORM KARTING ENGINE
NATIONAL HOMOLOGATION FORM KARTING ENGINE Manufacturer TORINI MOTOR CO., LTD. Make TORINI Model TC250 (PREVIOUSLY TRE220) UPDATE Validity of the homologation 6 years Number of pages 35 This Homologation
More informationOil Module in the Inner V
Oil Module in the Inner V There are numerous oil supply passages under a cover in the V of the engine. The cover is bolted directly to the cylinder block, with a metal gasket positioned between them. Oil
More informationNATIONAL HOMOLOGATION FORM KARTING ENGINE X30 SUPER - TAG
NATIONAL HOMOLOGATION FORM KARTING ENGINE X30 SUPER - TaG Manufacturer IAME S.P.A - ZINGONIA Make IAME Model X30 SUPER - TAG Validity of the homologation 6 years Number of pages 51 This Homologation Form
More informationXMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS BOLTS: Eight 6mm grade 12.9. PLUNGERS: A special thick solid ceramic
More informationTECHNICAL DATA - ENGINE 250/300/380 SX/MXC/EXC/EGS 98 (all models out of USA)
TECHNICAL DATA - ENGINE 250/300/380 SX/MXC/EXC/EGS 98 (all models out of USA) Engine 250 SX 250 EXC, EGS 300 EXC, EGS 380 SX 380 EXC, EGS Design Liquid-cooled single-cylinder two-stroke engine with Twin
More informationCOMER SW80 TECHNICAL SPECIFICATIONS
VERSION 3 / 2013 UPDATED AUGUST 20 th, 2013 DOCUMENT UPDATE SCHEDULE It is certified that the updates listed below have been approved by the Australian Karting Association and have been incorporated into
More informationX30 CHALLENGE INTERNATIONAL TECHNICAL REGULATIONS 2017 PART 2 ENGINES
X30 CHALLENGE INTERNATIONAL TECHNICAL REGULATIONS 2017 PART 2 ENGINES X30 CHALLENGE INTERNATIONAL TECHNICAL REGULATIONS 2017 - PART 2: ENGINES ARTICLE 1 - ENGINE IAME X30 125cc RL TaG - X30 SENIOR & X30
More informationJUNIOR-ROK 2014 Specification Sheet /A Dated 01/01/2014
IDENTIFICATION SHEET This Identification Sheet reproduces descriptions, illustrations and dimensions of the JUNIOR ROK engine to be used in the JUNIOR ROK CUP CLASS in South Africa BOTH ENGINES WITH VORTEX
More informationMOUNTING GUIDE ENG XX-MXS-EBAMXSGP90 11/2014. MAXISCOOT - B.P F Forbach Cedex
MOUNTING GUIDE ENG XX-MXS-EBAMXSGP90 11/2014 CYLINDER MXS GP 90 FOR: DERBI EURO 2 Ref.: MXSGP002 DERBI EURO 3 Ref.: MXSGP003 MINARELLI AM6 Ref.: MXSGP006 MINARELLI HORIZ. LC Ref.: MXSGP008 MAXISCOOT -
More informationHIRTH 3203 Carburated - 65 hp
HIRTH 3203 Carburated - 65 hp 2706-65Hp engine shown with fan cooling HIRTH s most popular engine. The 3203 produces more horsepower and torque per pound than any other engine in its power class. Hirth
More informationNATIONAL HOMOLOGATION FORM - ENGINE
NATIONAL HOMOLOGATION FORM - ENGINE Homologation N Manufacturer VORTEX Make DVS JNR Model 125CC Validity of the homologation 10 years Number of pages 30 This Homologation Form reproduces descriptions,
More informationENGINE 108H. Manufacturer. TORINI MOTOR CO., LTD. Make. TORINI Model. TRE220 UPDATE (to TC250) Validity of the homologation 6 years Number of pages 31
ENGINE Manufacturer TORINI MOTOR CO., LTD. Make TORINI Model TRE220 UPDATE (to TC250) Validity of the homologation 6 years Number of pages 31 This Homologation Form reproduces descriptions, illustrations
More informationMANUAL INDEX. Page 1. LEOPARD 125cc ENGINE DISASSEMBLY CRANKSHAFT DISASSEMBLY/ ASSEMBLY CRANKSHAFT DISASSEMBLY 8
MANUAL INDEX Page 1. LEOPARD 125cc ENGINE DISASSEMBLY 1 2. - CRANKSHAFT DISASSEMBLY/ ASSEMBLY 8 2.1- CRANKSHAFT DISASSEMBLY 8 2.2- CRANKSHAFT ASSEMBLY 10 3. LEOPARD 125cc ASSEMBLY 13 4. - CHECK CYLINDER
More informationXTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS BOLTS: Six 6mm grade 12.9. PLUNGERS: A special thick solid ceramic for
More informationMite Mfg Co.098 Diesel X SIZE R0.217" " deep R0.111" Drill #21. Tap Drill #50. 1/4" deep on " PCD Tap 2-56 (3 places) R0.
0.100" 0.074" 0.766" Ø0.398" Ø0.188" 25 Ø0.312" Ø0.125" 0.552" Ø0.250" (ream) 0.306" 0.166" 0.535" Ø0.775" Ø0.716" Screw cut 32 TPI 0.019 " deep -1 CRANKCASE Magnesium Die Casting with cast-in bronze bush
More informationInternal Combustion Engine. Prepared by- Md Ferdous Alam Lecturer, MEE, SUST
Internal Combustion Engine Prepared by- Md Ferdous Alam Lecturer, MEE, SUST What is an Engine? -a machine designed to convert one form of energy into mechanical energy Two types of engines : 1. Internal
More informationInstructions and Information
The MOKI story MOKI ENGINES Instructions and Information MOKI was 45 years old this year. In 1957, the MOKI plant was established by the Ministry of Defense for the development of model engines for the
More informationPetrol Engine 13hp PARTS BOOKLET MODEL: LF13
Petrol Engine hp PARTS BOOKLET MODEL: LF Index Crankcase Assembly Crankcase Cover Assembly Cylinder Head & Cylinder Head Cover Assembly Crankshaft, Piston, Connecting & Balancing Shaft Combination of Camshaft
More informationHusqvarna Hedgetrimmers 325HS/ 325HE/ 325HDA. Workshop manual
Husqvarna Hedgetrimmers 325HS/ 325HE/ 325HDA Workshop manual 101 90 73-26 2 Workshop Manual Hedge trimmers Supplement for models 325HS, 325HE,325HDA Contents 1. Starter 5 2. Ignition system 7 3. Fuel system
More informationSuper 1050 Chain Saw UT Page 1 of 16 Carburetor Chamber
Super 1050 Chain Saw UT-10139 Page 1 of 16 Carburetor Chamber Super 1050 Chain Saw UT-10139 Page 2 of 16 Carburetor Chamber 1 58319A 1 RING- Retaining 2 592301 1 COVER- Air filter 3 A70326 1 NUT- Cover
More informationBREAK-IN BENCH FOR ALL 1/8 & 1/10 NITRO ENGINES INSTRUCTION MANUAL
BREAK-IN BENCH FOR ALL 1/8 & 1/10 NITRO ENGINES INSTRUCTION MANUAL CONTENTS HUDY Engine Break-In Bench INTRODUCTION...2 SAFETY FIRST...3 EXPLODED VIEW...4 EQUIPMENT REQUIRED FOR OPERATION...5 FACTORY PRE-ASSEMBLED...7
More informationWorld Formula TECH MANUAL
World Formula TECH MANUAL Section 1 General Rules 1. Only stock Briggs & Stratton World Formula Model # 124435-8101 will be used in this class except as provided in this Tech manual. All parts will be
More informationEddy current sensors eddyncdt
Eddy current sensors eddyncdt Measuring principle - A magnetic field is generated while energising the coil with alternating current - If there is a magnetically conductive material within the magnetic
More informationMinistock Rule Update
Ministock Rule Update 08-08-17 Following on from the positive feedback received under the Consultation process in late 2016, the Board have agreed to the following rule updates to be made on the Ministocks.
More informationWKA 2010 MANUFACTURER S CUP TAG SERIES REGULATIONS
WKA 2010 MANUFACTURER S CUP TAG SERIES REGULATIONS Contact information and updates can be found at www.ovka.com The following regulations are guidelines ONLY. Please refer to 2010 WKA Technical Manual
More informationNote: Registration does not imply or guarantee use in a class
1 Note: Registration does not imply or guarantee use in a class or classes. Application for use in a class or classes must be applied for after Homologation and Registration approvals ENGINE Manufacturer
More informationCounter-clockwise, view to output shaft Mixture 1:50, 2-stroke-oil, fuel min. 95 octane (RON)
HIRTH 2703 Carburated - 55 hp The 2703 V is an air cooled, piston controlled 2-cylinder-inline-2-stroke engine with one or two carburetors and Nikasil coated cylinders. It has one of the highest power
More informationNATIONAL HOMOLOGATION FORM
NATIONAL HOMOLOGATION FORM Homologation N ENGINE Manufacturer BRIGGS & STRATTON Make ANIMAL Model 124332 Validity of the homologation 6 years Number of pages 27 This Homologation Form reproduces descriptions,
More informationNATIONAL HOMOLOGATION FORM - ENGINE
NATIONAL HOMOLOGATION FORM - ENGINE Homologation N Manufacturer VORTEX Make MINI ROK Model 60CC Validity of the homologation 6 years Number of pages 32 This Homologation Form reproduces descriptions, illustrations
More informationOlive Shakers product s details
73 product s details SPECIFIC ENGINE OLIVATOR M SERIES REDUCTION GEAR CRANKCASE Reinforced engine housing fixed to the reduction gear (8 bolts). PATENTED BEARING SUPPORT These powerful engines have been
More informationSimple Carburettor Fuel System for a Piston Engine. And how it works
Simple Carburettor Fuel System for a Piston Engine And how it works Inlet Exhaust Tank PISTON ENGINE Carburettor Fuel System Filler Cap COCKPIT FUEL GAUGE E FUEL 1/2 F Filler Neck Tank Cavity FUEL LEVEL
More informationOlive Shakers product s details
85 product s details SPECIFIC ENGINE OLIVATOR M SERIES REDUCTION GEAR CRANKCASE Reinforced engine housing fixed to the reduction gear (8 bolts). PATENTED BEARING SUPPORT These powerful engines have been
More information2019 SK Modified Open Engine Rules Supplement
2019 SK Modified Open Engine Rules Supplement 20E- 5 GENERAL ENGINE REQUIREMENTS Engine must be OEM cast iron V8 production block, or the Dart SHP Block. Cylinder heads must be OEM or Dart 10024266, and
More informationPARTS BREAKDOWN
Component Item Description 511224 Air Filter To Suit 596165 Toolex Chainsaw 511220 Walbro Carburettor To Suit Toolex Chainsaw 596165 511221 Starter Assembly Complete Suit Toolex Chanisaw 596165 511223
More informationX30 ROOKIE 60cc FEATURES - CARACTERISTIQUES. Cylinder volume Volume du cylindre cm³. Bore Alésage mm
X30 ROOKIE 60cc FEATURES - CARACTERISTIQUES Cylinder volume Volume du cylindre 59.45 cm³ Bore Alésage 41.81 mm Max. theoretical bore Alésage théorique max. 42.00 mm Stroke Course 43.30 mm Cooling system
More informationChapter 15. Inertia Forces in Reciprocating Parts
Chapter 15 Inertia Forces in Reciprocating Parts 2 Approximate Analytical Method for Velocity and Acceleration of the Piston n = Ratio of length of ConRod to radius of crank = l/r 3 Approximate Analytical
More information21-21H-00 PB-2100,PB-2155,PB-2200SI 1
21-21H-00 PB-2100,,PB-2200SI 1 2 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice.
More informationEN SPECIFICATIONS GUIDE 1
SPECIFICATIONS GUIDE 1 56 14 69 25.00 38.50 Outside Dimensions Length Width Height from Centerline Operating RPM 119mm 154mm with muffler 110mm 1,400 10,000 Specifications Displacement 20cc (1.20 cu. in.)
More informationRacing Performance Catalog & Reference Guide Model/Type:
Version 4/08 Racing Performance Catalog & Reference Guide Model/Type: 124435 8105-01 Table of Contents SAFETY... 1 WORLD FORMULA General Specs...3 Special Tools...3 Torque Specs...3 Racing Specifics...3
More information1996 ACURA 3.5RL POWERTRAIN
- - - n- _n - --- OVERVIEW The 3.5 RL is powered by a 3.5-liter,all-aluminum, single-overhead camshaft, 90-degree V-6 engine which produces 210 horsepower at 5200rpm and 2241bsft of torque at a very low
More informationCounter-clockwise, view to output shaft Mixture 1:50, 2-stroke-oil, fuel min. 95 octane (RON)
HIRTH 2703 Carburated - 55 hp The 2703 V is an air cooled, piston controlled 2-cylinder-inline-2-stroke engine with one or two carburetors and Nikasil coated cylinders. It has one of the highest power
More informationPERFORMANCE ENGINEERING
PERFORMANCE ENGINEERING Every part, every component, every system on a KOHLER engine is guided by our exclusive Performance Engineering standards standards that drive us to operate on the leading edge
More information21-25F-00 PB-251, PB-255ES, ES-255ES 1
21-25F-00 PB-251,, ES-255ES 1 2 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice.
More informationReproduction. Not for. Briggsracing.com. CORPORATION Briggs & Stratton Corporation MS /08
Briggsracing.com MS-5702-4/08 BRIGGS&STRATTON CORPORATION Post office box 702 Milwaukee, WI 53201 USA 414 259 5333 2008 Briggs & Stratton Corporation Version 4/08 Racing Performance Catalog & Reference
More informationINDEX INTRODUCTION. Reference No L-01 REVISED:
12-21L-01 1 1 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications
More informationWATERSWIFT 60cc - TaG
WATERSWIFT 60cc - TaG FEATURES - CARACTERISTIQUES Cylinder volume Volume du cylindre 59.17 cm³ (60.00 cm³ max) Bore Alésage 41.81 mm Max. theoretical bore Alésage théorétique max. 42.10 mm Stroke Course
More informationBSA Goldstar Parts - Price List Feb Exhaust Lifter Cable Exhaust Lifter Cable Holder S/S 9.00
Rocker Boxes 65-1137 Exhaust Lifter Cable 15.00 65-1163 Exhaust Lifter Cable Holder S/S 9.00 2-443 Exhaust Lifter Cable Holder Nut S/S 0.50 65-401 Exhaust Lifter Spindle Felt 2.00 65-387 Exhaust Lifter
More informationKARTSPORT NEW ZEALAND MANUAL SECTION N SPECIFICATIONS RULE N10 - VORTEX KIWI MINI ROK. Issue published and effective
KARTSPORT NEW ZEALAND MANUAL SECTION N SPECIFICATIONS RULE N10 - VORTEX KIWI MINI ROK Issue 2018-1 published and effective 10-4-18 Rule N10 VORTEX KIWI MINI ROK N10.1 GENERAL SPECIFICATIONS 10.1.1 These
More informationENGINE. Manufacturer IAMEs.p.a. Category. Homologation Period. Pages 16. Model, Type SIGNATURE AND STAMP OF AKA SIGNATURE AND STAMP OF APPLICANT
1 ENGINE Manufacturer IAMEs.p.a. Category Make Model, Type PARILLA Leopard X30 125cc RL - TaG - AUS Homologation Period Pages 16 This homologation sheet reproduces description, illustrations and dimensions
More informationVALVE TIMING DIAGRAM FOR SI ENGINE VALVE TIMING DIAGRAM FOR CI ENGINE
VALVE TIMING DIAGRAM FOR SI ENGINE VALVE TIMING DIAGRAM FOR CI ENGINE Page 1 of 13 EFFECT OF VALVE TIMING DIAGRAM ON VOLUMETRIC EFFICIENCY: Qu. 1:Why Inlet valve is closed after the Bottom Dead Centre
More information1.8L & 2.2L 4-CYL Article Text 1998 Subaru Impreza
1.8L & 2.2L 4-CYL Article Text 1998 Subaru Impreza ARTICLE BEGINNING 1995-98 ENGINES Subaru - 1.8L & 2.2L 4-Cylinder 1995-97: Impreza (1.8L) 1995-98: Impreza (2.2L), Legacy (2.2L) * PLEASE READ THIS FIRST
More informationSAMICK LINEAR BUSHING
Linear Bushing SAMICK LINEAR BUSHING SAMICK Linear Bushing, LM type is the linear motion system with unlimited stroke by applying with LM shaft. Because of the point contact between Balls and LM shaft,
More informationReplacement Parts & Accessories Price List
Replacement Parts & Accessories Price List GC & F Gas Concrete Saw Effective January, 0 0 ICS, Blount International Inc. Supersedes all previous pricing. Specifications and pricing are subject to change
More informationWhat is a GLOW engine?
Micro engines What is a GLOW engine? R/C models get power from various modes. Gliders, for example, do not need a power source other than what nature provides. But they are the exception. Normally all
More informationHOMOLOGATION OF KART ENGINE
HOMOLOGATION OF KART ENGINE Category IAME X30 JUNIOR & SENIOR Manufacturer IAME Model X30 125cc RL TaG - UK Valid From 01 January 2014 Number of pages 20 This Homologation Form reproduces descriptions,
More informationHonda GX 160 Technical Regulations
Honda GX 160 Technical Regulations 1. GENERAL The scrutineer will pay special attention to ensure that the finish of all components match those of the standard unit and reserves the right to compare any
More informationReplacement Parts & Accessories Price List
Replacement Parts & Accessories Price List GC & F Gas Concrete Saw Effective July, 0 0 ICS, Blount International Inc. Supersedes all previous pricing. Specifications and pricing are subject to change without
More informationReplacement Parts & Accessories Price List
Replacement Parts & Accessories Price List GC & F Gas Concrete Saw Effective January, 0 0 ICS, Blount International Inc. Supersedes all previous pricing. Specifications and pricing are subject to change
More informationCONVENTIONAL ENGINE CONSTRUCTION
CONVENTIONAL ENGINE CONSTRUCTION CYLINDER BLOCKS, HEADS, AND CRANKCASES The cylinder, or the engine block, is the basic foundation of virtually all liquid-cooled engines. The block is a solid casting made
More informationINSIDE YOUR HOLLEY CARBURETOR FUEL INLET SYSTEM
INSIDE YOUR HOLLEY CARBURETOR The carburetor is quite simply a fuel metering device that operates under the logical and straightforward laws of physics. It has evolved over the years from a very simple
More informationSJV 3400 RPM D VERSION 3/4 WITH GAS ENGINE FLANGE DIMENSIONS
Plunger Pumps FEATURING SJV 3400 RPM D VERSION 3/4 WITH GAS ENGINE FLANGE DIMENSIONS MANIFOLD: High strength forged brass for long term use. BOLTS: Three 8mm grade 8.8. PISTONS: Ceramic coated stainless
More informationLF2WP (-CA) WATER PUMP EXPLODED VIEWS & PARTS LISTS
LFWP (-CA) WATER PUMP EXPLODED VIEWS & PARTS LISTS 0 Industrial Park Road Van Buren, AR 9 (8) - www.lifanpowerusa.com E- CRANKCASE ASSY 8 9 0 /8F /8F GB/T 80/8F 00/8F-E /8F 9/8F /8F GB/T 80/8F GB/T. /8F
More informationSERVICE DATA GT-220ES SRM-220ES TRIMMER/BRUSHCUTTER. (Serial nember : and after) (Serial nember : and after) INDEX INTRODUCTION
10-21P-02, 1 1 SERVICE DATA TRIMMER/BRUSHCUTTER INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change
More information00-36A-04 CS-350T, CS-350TES, CS-350WES 1
00-36A-04,, 1 0 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications,
More informationA member of the Interpump Group
FEATURES Nickel-plated cast manifold manufactured like heavy-duty pump line Triplex Plunger Pump, Gas New generation seal package New dust protection chamber TRIPLEX TRIPLEX Solid ceramic plungers New
More informationSERVICE DATA CHAIN SAW CS-450. (Serial number : and after) CONTENTS INTRODUCTION. Reference No B-01 REVISED: ISSUED:
01-45B-01 1 0 SERVICE DATA CHAIN SAW (Serial number : 36000001 and after) INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and
More informationBriggs & Stratton Animal TECH MANUAL Version 1.6 Section 1 General Rules cannot Section 2 Required Modifications Section 3 Allowable Modifications
Briggs & Stratton Animal TECH MANUAL Version 1.6 updated 2/ 7 / 2011 Section 1 General Rules 1. Only stock Briggs & Stratton Animal # 124332-8201and 124332-8203 - 01engine will be allowed in this class.
More informationSERVICE DATA TRIMMER/BRUSHCUTTER ECHO: SRM-236ES STAGE MODEL. (Serial number : and after) INTRODUCTION CONTENTS
10-21V-00 SRM-236ES 1 * 1 SERVICE DATA TRIMMER/BRUSHCUTTER ECHO: SRM-236ES STAGE MODEL (Serial number : 37000001 and after) INTRODUCTION We are constantly working on technical improvement of our products.
More informationIntroducing the Sea-Doo 4-TEC SUPERCHARGED
Introducing the Sea-Doo 4-TEC SUPERCHARGED 185HP & MASSIVE TORQUE iame41-1.doc 29Mar03 Page 1 of 2 Another Sea-Doo watercraft first and only. Introducing the 185hp, GTX 4-TEC SUPERCHARGED PWC. The 4-TEC
More informationENGINEERING A NEW GENERATION OF POWER
ENGINEERING A NEW GENERATION OF POWER 136cc SUMMER ENGINE 7.0 LB-FT TORQUE 4.0 HORSEPOWER Dual Exhaust Muffler For sound pressure balancing Ergonomic Fuel Cap with Tether Cord High Flow Air Filter Designed
More informationSECTION 6A1-2 - ENGINE MECHANICAL - V6 SUPERCHARGED
SECTION 6A1-2 - ENGINE MECHANICAL - V6 SUPERCHARGED CAUTION: This vehicle will be equipped with a Supplemental Restraint System (SRS). A SRS will consist of either seat belt pre-tensioners and a driver
More informationK760 2 A
A 2 3 4 5 6 7 8 6 7 8 2 9 3 4 5 2 20 9 2 22 0 23 24 25 26 27 Page A Pos. Part No. Description Quantity Notes New Part 506 28 44-0 COLLAR SCREW 2 2 506 39 36-02 BELT GUARD Incl. 3 3 506 26 66-04 BELT TENSIONER
More informationMKX 50 PRO MKX 50 BIGFOOT MKX 50 MONGOOSE
MKX 50 PRO MKX 50 BIGFOOT MKX 50 MONGOOSE CHASSIS 1 81108001 PERIMETRAL ALUMINIUM CHASSIS MKX 1 2 81108002 FIXING BRACKET SET MKX ENGINE 2 3 81108003 FIXING SCREW MKX ENGINE 2 4 81108004 RIGHT FOOTREST
More informationDPC6430. Documents DPC Tank and handle grips. 2 Hood, air filter. 3 Muffler, connecting muff. 4 Carburetor. 5 Starter assy., ignition assy.
Documents 1 Tank and handle grips 2 Hood, air filter 3 Muffler, connecting muff 4 Carburetor 5 Starter assy., ignition assy. 6 Cylinder, crankshaft, clutch 7 Cutting device, protection hood 8 Blades, tools
More informationPERFORMANCE ENGINEERING. from airborne contaminants that can easily clog traditional air filters. Since the Quad-Clean
PERFORMANCE ENGINEERING Engineered to perform in the harshest environments, Quad-Clean all-season four-stage cyclonic air filter a standard on Command PRO 7-1 hp engines protects the engine from airborne
More informationSAMPLE STUDY MATERIAL
IC Engine - ME GATE, IES, PSU 1 SAMPLE STUDY MATERIAL Mechanical Engineering ME Postal Correspondence Course Internal Combustion Engine GATE, IES & PSUs IC Engine - ME GATE, IES, PSU 2 C O N T E N T 1.
More informationMARINE.HONDA.COM.AU. BF200 (200hp Outboard)
MARINE.HONDA.COM.AU BF200 (200hp Outboard) The BF200 delivers superior torque, top-end speed and world-class performance in a narrow, balanced V6 powerplant. INTRODUCTION MAXIMUM POWER Packed with power,
More informationPARTS LIST. BRC Racing BRC 250 FE SERIAL NO: BRC Racing
BRC Racing PARTS LIST BRC 20 FE SERIAL NO: BRC Racing A Division of BRC Engineering Ltd. # - 2nd Ave NE Calgary, Alberta Canada T2E S1 Tel: 0-21-00 Fax: 0-21-0 Web: www.brceng.com RELEASE DATE: 01-200
More information2018 Junior Sprint Rules
2018 KidSprint Engine Rules Briggs World Formula 2018B All parts must be Briggs & Stratton factory production parts unless otherwise noted in these rules. No machining, polishing or alteration of any parts
More informationInternal Combustion Engines
Internal Combustion Engines The internal combustion engine is an engine in which the burning of a fuel occurs in a confined space called a combustion chamber. This exothermic reaction of a fuel with an
More informationILLUSTRATED PARTS BOOK. 196cc Rear Tine Tiller Basic, EPA MODEL#: S-RTT-196-[E] Rev A200484
ILLUSTRATED PARTS BOOK 196cc Rear Tine Tiller Basic, EPA MODEL#: S-RTT-196-[E] Rev. 2 20120711 1 A200484 Table of Contents Upper Handle Assembly 3 Base Assembly. 4-6 Parts List 7-10 Kit, Transmission Assembly
More information