Olive Shakers product s details

Transcription

1 85

2 product s details SPECIFIC ENGINE OLIVATOR M SERIES REDUCTION GEAR CRANKCASE Reinforced engine housing fixed to the reduction gear (8 bolts). PATENTED BEARING SUPPORT These powerful engines have been designed specifically for the olive shakers. Every component of the engine has been studied to resist to high vibrations. The engine has high torque and high performances. ROTATION SYSTEM In case-hardening steel. ENGINE CRANKSHAFT - PISTON CLUTCH 78 mm clutch designed for the heavy duty conditions of professional use. CLUTCH DRUM Clutch drum made of special high performance material. No weldings are used; this is to guarantee a longer life of this component. 86 The two pieces crankshafts with two counterweights are made of high quality steel. The special design reduces vibrations and guarantees high performances. Ultra light pistons are used to reduce vibrations. All pistons made of special cast iron have two pistons rings to ensure a longer life of the engine. DIGITAL IGNITION The digital ignitions have been specifically developed by ACTIVE to offer better performances. The digital ignition guarantees an easier start of the engine in any condition, a cleaner engine and lower emissions. CARBURETTOR MUFFLER FUEL TANK Walbro WT (WYK for M50) diaphragm carburettors with primer are used on all engines. Diaphragms are made of a special material (Mylar) used to guarantee good and long performances even using unleaded fuel with high percentage of alcohol and/or alkylic fuels. The special muffler reduces the noise and improves the engine performances. Graphite gasket resists to high temperature (up to 900 C ). A larger cap on the gasoline tank makes easy the filling operation. All pipes are manufactured in Viton, special material resisting to unleaded fuel corrosion and high temperatures. Special device to avoid Vapor-Lock.

3 HARNESS AIR FILTER REDUCTION GEAR Reduction gear designed specifically for the use on the olive shakers. The harness is ergonomic, adjustable and is equipped with anti vibrations system. The cushion has been designed to guarantee the maximum comfort. The paper filter guarantees better performances and longer life of the engine. CHROMIUM-PLATED SHAFT PROJECT WITH 2 BUSHING PATENTED HANDLE OSCILLATING HANDLE The patented handle is freely sliding to reduce the vibrations an to offer an ideal comfort to the operator. The handle is also equipped with a control to avoid the branches to get out from the hook. The oscillating handle guarantees to the operator a better comfort. 87 TANK GUARD CARBURETTOR HEATING KIT SUPPORT An heavy duty steel guard is mounted to protect the tank and gear box from shocks. The kit to warm intake air ensures an easy start in any conditions. Ideal when temperatures are low. Thanks to a metal support, assembled to the engine, the unit can be easily layed on the ground.

4 M 50 Model Code Equipment Shaft reinforced 2 mt (ø26) Telescopic shaft extendible 2-3,20 mt (ø30 - ø26) shaft, hook and rubber hook protection Model Code Displacement cc Power Hp/Kw Ignition Fuel tank capacity lt movement mm per minute Minimum length mt Weight kg (without shaft) 88 M50 - shaft 2 mt /2.2 M50 - shaft mt / M 60 Powerful and high torque engine specifically designed for the shaker. Every component of the engine has been studied to resist to strong vibrations. Several patents pending. The Active OLIVATORS do not damage the tree roots and the young buds, vital for next harvesting. The Active OLIVATORS reduce the harvesting time and guarantee more competitiveness. Model Code Equipment Shaft reinforced 2 mt (ø30) Telescopic shaft extendible 2-3,20 mt (ø30 - ø26) shaft, hook and rubber hook protection Model Code Displacement cc Power Hp/Kw Ignition Fuel tank capacity lt movement mm per minute Minimum length mt Weight kg (without shaft) M 60 - shaft 2 mt / M 60 - shaft mt /

5 M 70 A new powerful 63cc engine is assembled to this model. The extra power of this engine guarantees higher productivity. Every component of the engine has been studied to resist to strong vibrations. Several patents pending. The Active OLIVATORS do not damage the tree roots and the young buds, vital for next harvesting. The Active OLIVATORS reduce the harvesting time and guarantee more competitiveness. Model Code Equipment Shaft reinforced 2 mt (ø30) Shaft reinforced 4 mt (ø30) shaft, hook and rubber hook protection Model Code Displacement cc Power Hp/Kw Ignition Fuel tank capacity lt movement mm per minute Minimum length mt Weight kg (without shaft) M 70 - shaft reinforced 2 mt M 70 - shaft reinforced 4 mt / / HOOK RUBBER HOOK PROTECTION 42 mm 42 mm 40 mm M70-M60 M50 M70-M60 M50 Hook designed to get the best grip on the branch Model Code Made of special rubber to guarantee the protection of the branches. Aluminium hook for 2 mt (M70/M60) and Aluminium hook for 4 mt (M70) Model Code Aluminium hook M Aluminium hook M Rubber hook for M70 and M Rubber hook for M

6 E 20 - E 20 B TRANSMISSION BATTERY CHARGE DISPLAY Green and red leds indicating good or low battery charge. ADVANTAGES: 90 Very quiet unit; 5 working speeds; No damages to tree roots and leaves; High productivity ( KG/hour); The motor positioned at the bottom of the shaft guarantees an balance when using the machine; Low battery consumption (i.e. 12V, 45 A battery = approx 8 working hours); Several safety devices: - When overheated motor, stops automatically. It will not restart till it reaches standard working temperature; - When, for any reason, the top heads are not rotating the motor stops till the moment the heads can again turn; - In the case a mistake is made in connecting the battery, the electronic circuit will not be damaged. Tension Power used Working area Speed control Max. fingers rotation Weight Length Height (including 1 mt extension) 12 v 4-10 Amp 550 mm x 275 mm 5 speed electronic control 2000 RPM 3 kg 2700 mm 4,2 mt - 5,2 mt Model Code Alimentation E * 15 mt cable for car battery use E 20 B * back pack battery *Battery not included

7 Accessories and Spare Parts for Olivator E 20 - E 20 B 91 LOOP HANDLE BACK PACK BATTERY (only for E 20 B) Model Code Loop handle mt EXTENSION Lithium-polymer battery (80% charge guaranteed up to 1600 charges) Capacity: 30 Amp h The battery has a charger indicator and a safety IP 65 connector Tension: 12,8 v Power: 600 Watt Weight: Battery only 4,2 Kg - Battery and back pack bag 5,0 Kg Model Code 1000 mm Model Code Extension Battery and back pack bag * Battery 22848* Battery charger *Battery can be charged ONLY USING ORIGINAL battery charger (p.n )

8 E 50 News Electric Motor 36V - 500/600 Watt the most powerful! 1000 mm SHAFT SECTION 92 CAR BATTERY WITH TRANSFORMER FROM 12 TO 36V BACK PACK LITHIUM BATTERY 36V - 15Ah (with dedicated cable) 2000 mm 1000 mm Brush motor 36V Frequency: 1200 vibration/min Tension: 36 volt Power: 500 Watt Recommended battery: 12Volt - 80Ah Frequency: 1350 vibration/min Tension: 36 volt Power: 600 Watt Duration: 6 hours continuously 2 possible power supplies Model Code Length per minute E Telescopic 2 mt 3 mt 1200/ Extension mt Back Pack Battery Kit 36V capacity 15 Ah 36V Battery cable connection Back pack battery 36V cable 12V Battery cable connection cable with transformer for car battery Watt Volt Weight kg

9 E 30 - E mm 1000 mm mm 2000 mm 1000 mm 1000 mm SHAFT SECTION Model Code Length per minute Watt Volt Weight kg Alimentation E Telescopic 2 mt 3 mt mt cable for car battery use E Telescopic 2 mt 3 mt mt cable for car battery use Extension mt

10 AO 35 S - A 40 SHAFT SECTION mm 1500 mm The Olivator AO 35 S and A 40 attachment can be used on all EVOLUTION, E700, VIPER and BACK PACK brushcutter models Model Code Length RPM reduction Couple limitator AO-35 S mt 6,75 : 1 NO A ,9 mt 4 : 1 SI