4.1. No. of Models. Pipe Capacity (in.)

Transcription

1 Threading Dependable heavy duty machines for maximum up-time, superior quality threads and minimal threading time. Industry s widest selection of hand and power threading equipment. Manual hammer type chuck and auto-chuck models. Type of s Pipe Capacity (in.) Page Manual Ratchet Threaders Exposed Ratchet Threader Sets 6 ½ ¼ 4. Enclosed Ratchet Threader Sets ½ ¼ 4. Ratchet and Handle Only 4. Three-way Pipe Threaders ½ 4. Exposed Ratchet Bolt Threader 2 ¼ 4.4 Carrying Case Hand Threader Die Heads Manual Threader Pipe & Bolt Dies ¼ Manual Receding Threaders s 65R-7C & 65R-C Pipe Dies for Geared Receding Threaders 0 2½ Geared Receding Threaders Power Threading w/ Geared Threaders 4.9 s 4/6 6 2½ Accessories Threading Accessories Thread Sealant 5 4. Cutting Oil 4.2 Oiler Hand-Held Power Threaders ¼ Threading Machines 00 Power Drive Complete A Threading Machine Threading Machine Threading Machine ½ Threading Machine ¼ ½ Compact Threading Machine 822- Threading Machine Threader Stands Optional Die Heads Threading Machine 8 ¼ Die Heads for ¼ Pipe Dies for Machine Die Heads Nipple Chucks/Adapters 4. 4.

2 Threader Selection Manual Ratchet Threaders Receding Threaders Hand-Held Power Threaders Threading Machines 00R R 2R -A Series* 65R Compact 55A I 224 Page * Standard configuration but can use any 2R dies. Pipe Threads (inches) Bolt Threads NPT BSPT NPSM BSPP UNF UNC ACME ½ ½-½ ¼ ½ ½-½ ¼ ¼-2 ¼-2 ¼-2 ¼-2 ¼-2 ¼ ¼-2 ¼ ¼-2 ¼-2 ¼ ¼-2 ¼ ¼-2 ¼-2 ¼-2 ¾- 8 ¾ ¾- 8 ¾- 8 ¾ See page 4.2

3 Manual Ratchet Threaders All matched Threader/Sets include Die Heads, Ratchet Assembly, Ratchet Handle and Alloy Dies. All Threader Sets use same 2-R Dies in Die Head. Exposed Ratchet Threader Sets OO-R: Capacity 8"-" 2-R: Capacity 8"-2" Capacity NPT BSPT NPSM in. mm OO-R ½ OO-R ¼ OO-R ¾ R ½-¼ 2-2 2¾ R ½ ¾ R ½ R Enclosed Ratchet Threader Sets No R capactiy: 8" -¼" Capacity NPT BSPT NPSM BSPP in. mm R ½-¼ Ratchet & Handle Only Ratchet knob indicates forward and reverse. Die heads snap in from both sides and lock in place OO-R R R R 8540 OO-RB Desription Ratchet & Handle Only Three-Way Pipe Threaders Each model cuts three thread sizes and uses 2-R ratchet threader dies. RH Alloy RH High Speed RH High Speed for Capacity in. mm -A NPT ½, ¾, 2, 20, A BSPT 6520 ½, ¾, 2, 20, A NPSM 6560 ½, ¾, 2, 20, See page 4.2 For die heads, see page For pipe and bolt dies, see page

4 Manual Ratchet Threaders Exposed Ratchet Bolt Threader Sets OO-RB: Capacity ¼"-" All matched threader sets include button die heads, ratchet assembly (OO-R) and ratchet handle. Button dies can be reversed to thread close to bolt shoulder or head. Die Heads Complete Thread Type Capacity Range in. mm 6680 OO-RB Ratchet Bolt Threader 0 UNC ¼ OO-RB Ratchet Bolt Threader 0 UNF ¼ Carrying Cases Helps keep die sets organized. Thread Type Length x Width x Height 8605 Metal Case OOR x x 6 7½ Metal Case OO-RB 9 8 x 7 4 x 6 7½ Metal Case R x x ¾ Metal Case R 24 8 x x 9 6 7¾ Metal Case (Holds 6 Die Heads) 2R x 5 x Metal Case (Holds 9 Die Heads) 2R 24 8 x 5 x Plastic Case 2R 25 x 5 x *Cases contain no die heads. 4.4 See page 4.2

5 Die Heads Manual Threaders OO-R, 2-R, -R & OO-RB North American Standards Nominal Pipe Size (in.) OO-R (NPT) Alloy RH High-Speed RH High-Speed for Stainless Steel RH (NPSM) Alloy RH R (NPT) Alloy RH High-Speed LH High-Speed RH High-Speed for Stainless Steel RH High-Speed for PVC RH High-Speed for Plastic Coated Pipe Alloy for IMC RH (NPSM) Alloy RH R (NPT) Alloy RH High-Speed RH High-Speed for Stainless Steel RH (NPSM) Alloy RH OO-RB 4 20 TPI TPI 8 6 TPI TPI (UNC) Alloy RH Alloy LH (UNF) 28 TPI 24 TPI 24 TPI 20 TPI 20 TPI 8 TPI 8 TPI 6 TPI 4 TPI 4 TPI Alloy RH Alloy LH All Die Heads complete come with selected dies and are set at the factory. Die Heads require assembly with supplied dies. All matched Threader/Sets include Die Heads, Ratchet Assembly, Ratchet Handle and specified Dies. 2 TPI TPI 5 8 TPI 4 0 TPI TPI 8 TPI See page 4.2 For 48 Oiler, see page

6 Die Heads Ratchet Threaders 00-R, 2-R, R British & International Standards Nominal Pipe Size (in.) OO-R (BSPT) Alloy RH High-Speed RH R (BSPT) Alloy RH High-Speed LH High-Speed RH Alloy for JIS RH (BSPP) Alloy RH R (BSPT) Alloy RH High-Speed RH (BSPP) Alloy RH British & International Standards Nominal Pipe Size (in.) 6 mm 20 mm 25 mm 2 mm 40mm -R (ISO) Alloy RH All Die Heads complete come with selected dies and are set at the factory. Die Heads require assembly with supplied dies. All matched Threader/Sets include Die Heads, Ratchet Assembly, Ratchet Handle and specified Dies. 4.6 See page 4.2

7 Pipe Dies OO-R, -R, 2-R, O-R, -R Ratchet Threaders or 0A, A -Way Pipe Threaders Die Material or Type Nominal Pipe Size Threads Per Inch ½ 4-½ 2-½ 2-½ (NPT) National Pipe Taper Alloy RH High-Speed RH High-Speed LH H.S. For Stainless Steel RH H.S. For PVC RH *HS Reversible RH *Dies can be reversed in die head for close to wall threading. (NPSM) National Pipe Straight Mechanical Alloy RH (API) American Petroleum Institute High-Speed RH (BSPT) British Standard Pipe Taper* Alloy RH High-Speed RH High-Speed LH *HS Reversible RH *Requires British Die Head (BSPP) British Standard Pipe Parallel* Alloy RH *Requires British Die Head ISO International Standards Organization Nominal Conduit Size in mm Thread Pitch in mm Alloy RH Requires R ISO Die Head BEC British Electrical Conduit () Nominal Conduit Size Threads Per Inch Alloy RH Requires R BEC Die Head Bolt Threaders Button Dies OO-RB Ratchet Bolt Threaders, or B, B, 5B, 7B -Way Bolt Threaders Die Material or Type Rod Diameter Threads Per Inch (UNC) Unified National Course Alloy RH (UNF) Unified National Fine Alloy RH See page 4.2 For 48 Oiler, see page

8 Manual Receding Threaders 65R-TC Threads "-2" pipe. True centering workholder. Jam-proof. Right-hand only. Capacity Nominal Pipe Size in. mm R-TC NPT with Set High-Speed Dies R-TC BSPT with Set High-Speed Dies Metal Carrying Case for 65R Series Threaders R-C Threads "-2" pipe. Jam-proof drive pawl. Cam workholder sets instantly. Right-hand only. Capacity Nominal Pipe Size in. mm R-C NPT with Set High-Speed Dies R-C BSPT with Set High-Speed Dies Metal Carrying Case for 65R Series Threaders 8.7 Receding Threaders Pipe Dies For 65R-C & 65R-TC Ratchet Threaders Die Material or Type (NPT) National Pipe Taper (BSPT) British Std. Pipe Taper " Thru 2"- /2 TPI " Thru 2"- TPI High-Speed RH 800 *66450 H.S. For Stainless Steel RH 805 H.S. For Cast Iron RH 80 * Requires BSPT Threader () Requires NPSM Threader (2) Requires BSPP Threader Pipe Dies For 4PJ Geared Pipe Threaders Die Material or Type (NPT) National Pipe Taper (NPSM) National Pipe Straight Mechanical () Nominal Pipe Size-Threads Per Inch Nominal Pipe Size-Threads Per Inch 2 /2"-8 "-8 /2"-8 4"-8 2 /2"-8 "-8 /2"-8 4"-8 High-Speed RH H.S. For Cast Iron RH (BSPT) British Standard Pipe Taper Die Material or Type Nominal Pipe Size-Threads Per Inch 2 /2"- "- /2"- 4"- High-Speed RH *6655 *66540 * See page 4.2

9 Geared Threader Configurations Power Threading with Geared Threaders Nos. 4, 6 Close couple method of threading. 700 Power Drive 00 Front-Mount 55 Rear-Mount 700 Power Drive Application for 4 and 6 Geared Threader requires: 774 Square Drive Adapter (pg. 4.5) 460 TriStand (pg. 2.2) 48 Oiler (pg. 4.2) 00 Power Drive Front-Mount Application for 4 and 6 Geared Threader requires: 206 Stand (pg. 4.7) Pipe Support (pg. 2.4) 48 Oiler (pg. 4.2) 844 Drive Bar (pg. 4.0) 758 Loop for 4 (pg. 4.0) 46 Support Arms for 6 (pg. 4.0) 00 Power Drive Rear-Mount Application for 4 and 6 Geared Threader requires: 206 Stand (pg. 4.7) 460 TriStand (pg. 2.2) 48 Oiler (pg. 4.2) 840A Universal Drive Shaft (pg. 4.0) 55 Threading Machine Front-Mount pg Threading Machine Rear-Mount (manual chuck only) Application for 4 and 6 Geared Threader requires: 460 TriStand (pg. 2.2) 48 Oiler (pg. 4.2) 840A Universal Drive Shaft (pg. 4.0) 00 Compact Threading Machine Front-Mount Application for 4 Geared Threader requires: 844 Drive Bar (pg. 4.0) 768 Drive Link Assembly (pg. 4.0) 00 Compact Threading Machine Rear-Mount Application for 6 Geared Threader requires: 840A Universal Drive Shaft (pg. 4.0) 460 TriStand (pg. 2.2) 48 Oiler (pg. 4.2) 822 Threading Machine Front-Mount Applicaiton for 4 Geared Threader requires: 24 Carriage Mount Kit (pg. 4.26) 224 Threading Machine Rear-Mount Application for 6 Geared Threader requires: 840A Universal Drive Shaft (pg.4.0) 460 TriStand (pg. 2.2) 48 Oiler (pg. 4.2) See page

10 Receding Geared Threaders Nos. 4/6 4 threads 2½", ", ½", 4" pipe with one set of dies. 6 threads 4", 4½", 5", 6" pipe with one set of dies. Jaw clutch prevents jamming. Simple adjustment for tapered or straight threads. Cam-type workholder sets instantly. Fully enclosed gearing. Right-hand only. Capacity Nominal Pipe Size in. mm NPT with Set High-Speed Dies 2 / BSPT with Set High-Speed Dies 2 / NPT with Set High-Speed Dies D-440 Ratchet and Handle 9 / Metal Carrying Case for 4 Geared Threaders Gearhead Motor Grease 0.5 Geared Threader Accessories 46 Support Arms 840A Universal Drive Shaft A telescoping (4" to 50") drive shaft for operation of Nos. 4 and 6 geared threaders with threading machines. Geared Threader Operation The Nos. 4 and 6 geared threaders, in conjunction with these accessories, allow power drives and threading machines to thread up to 4" and 6" pipe. 46 Pipe Support 758 Loop Adjustable Pipe Support (page 2.5) A Universal Drive Shaft Loop (00) ¼ Support Arms (00) 0½ Drive Bar (00, 55M & old style) 5¾ Drive Link Assembly (55, 55M & old style) 2½ * Kit 4 on 55 Auto Chuck with High-Clearance Carriage * Kit 4 on 55 Manual Chuck with High-Clearance Carriage *Kits include all accessories necessary for threading with a 4 mounted on a 55 with a high-clearance carriage. 844 Drive Bar 4.0 See page 4.2

11 Pipe Dies 4 Geared Pipe Threaders Die Material or Type (NPT) National Pipe (BSPT) British Taper Standard Pipe Taper Beveling Dies 2 /2" Thru 4"-8 TPI 2 /2" Thru 4"- TPI 2 /2" Thru 4" High-Speed RH 820 *66625 H.S. For Stainless Steel RH *70645 H.S. For Cast Iron RH 825 H.S. For PVC RH 80 H.S. 7 2 Bevel 840 (NPSM) National Pipe Straight Mechanical Use (NPT) Dies and Rotate Threader Guide Post 80 (BSPP) British Standard Pipe Parallel Use (BSPT) Dies and Rotate Threader Guide Post 80 6 Geared Pipe Threaders (NPT) National Pipe (BSPT) British Die Material or Type Taper Standard Pipe Taper 4" Thru 6"- 8 TPI 4" Thru 6"- TPI High-Speed RH 855 *66620 H.S. For Stainless Steel RH (NPSM) National Pipe Straight Mechanical Use (NPT) Dies and Rotate Threader Guide Post 80 (BSPP) British Standard Pipe Parallel Use (BSPT) Dies and Rotate Threader Guide Post 80 RIDGID Thread Sealants RIDGID Gray and White proprietary formulas are NFS and UPC listed and approved for potable water use. The non-toxic, lead-free formulas won t harden or freeze, allowing easy disassembly of joints without compromising thread integrity. The Gray Sealant is a smooth extra-tacky paste that clings to the threads and provides a leak-proof seal. RIDGID Gray Sealant prevents thread corrosion and is approved for use in water, steam, air and natural gas, as well as in diluted acids, caustics, LPG and oil lines. RIDGID Gray should be used on metal pipes only. RIDGID White Sealant with ultra-fi ne Tefl on particles allows for tighter seal with less effort. The formula is not affected by oils, dilute acids or common solvents and can be used on PVC, CPVC, ABS, nylon, polypropylene, polybutylene, delrin, cycolac, as well as on metal pipes. RIDGID White Sealant should not be used on lines carrying oxygen, halogens or liquid sodium. Gray (no Teflon) Per Case pint can (brush-in-can) pint can (brush-in-can) quart can (brush-in-can) White (with Teflon) Per Case pint can (brush-in-can) pint can (brush-in-can) Note: Working pressure for all RIDGID sealants is 25 p.s.i. Tefl on is a registered trademark of E.I. Dupont de Nemours & Co. See page

12 Cutting Oil Thread Cutting Oil Cools threads and pipe during operation. Speeds metal removal. Improves thread quality. RIDGID thread cutting oils are free of chlorine and other halogens, PCBs and heavy metals. Complete material safety data sheet available. Dark Oil Traditional mineral oil with low odor and anti-mist formulation. Nu-Clear Oil Clear mineral oil with low odor and anti-mist formulation. Special low temperature properties maintain workable viscosity to -20 F. Extreme Peformance Oil High performance mineral oil formulated to produce superior quality threads on stainless steel and black pipe. Container Size U.S. Metric Nu-Clear Dark Containers Per Case Extreme Per Case Performance Qt.* 0.94 L Gal..78 L Gals 8.90 L Gal Drum L oz** 0.8 L *Flip-top included with every quart bottle. ** Aerosol can. Oiler 48 Oiler The new 48 hand-held oiler is sturdier than ever before. The 48's pump assembly and heavy-duty reservoir are designed to increase productivity. Pump Assembly 50% more oil per stroke than other hand-held oilers for longer die life. An ergonomic 2-fi nger trigger design that reduces user fatigue. Die cast, heavy-duty body with swivel nozzle with no exposed parts for longer life. Heavy Duty Reservoir The new 48 oiler features a patent pending fastenerless twist and lock drip pan that easily locks in place. The new material withstands abrasion, is lighter than metal and does not rust. The new reservoir will not crack or leak. New material is so strong that under normal use, no dents will form on impact or shape changes will occur over time. As a result, the drip pan will fi t squarely on the reservoir time after time. Integral molded body eliminates leaks at the hose-reservoir connection. Convenient anti-slip grip design with integral hook for easy hanging Hand operated oiler complete. Includes gallon thread cutting oil, reservoir with removeable chip tray, and 54" hose Hand operated oiler with attachment for gallon and 5 gallon containers and 54" hose #4 Hand-operated oiler only #4 Hand-operated oiler with 54" hose and hose fi ttings

13 Hand-Held Power Threaders 600 Power Drive A hand-held, powerful, portable power drive. Features a reversible 5V or 220V universal motor. Capacity 8"-¼" (mm-2mm) pipe. Designed for RIDGID R die heads. Ideal for on-site applications such as gas line pipe installation. CSA approved. Approved to UL standards (NRTLC). Technical Specifications Motor: 2 HP Universal 5V or 220V, Hz. Switch: Heavy-duty paddle-type switch with safety lock off switch. Separate FORWARD/REVERSE switch. Gear Housing: Aluminum. Body & Handle: Durable heavy-duty fiberglass reinforced plastic. Spindle Speed: 2 RPM (No load). Capacity: 8"-¼" (mm-2mm) pipe. Die Heads Included: ½, ¾,, ¼ (Type R). : 2½ lbs. (5½ kg) power Drive only. Length: 20 in. (5 cm). 60 Support Arm (Standard Equipment) V Only w/case V ½"-¼" NPT w/case and Support Arm V ½"-¼" NPT w/case, Export Accessories Oiler with gallon of Nu-Clear Thread Cutting Oil 20½ Support Arm Carrying Case Gearhead Motor Grease Square Adapter For R Die Heads, see page 4.5. For Dies, see page

14 Optional Carrying Case 690 Power Drive The 690 Power Drive is a new lightweight and powerful hand-held power drive. The 690 Power Drive is designed for threading 8" - 2" pipe with the use of -R Die Heads. It comes equipped with a full set of -R Die Heads, ½" - 2", the 69 Support Arm and a durable Carrying Case. The 690 Power Drive is the perfect lightweight and portable power drive for maintenance and repair workers, as well as service plumbers requiring 2" pipe capacity. Capacity: 8" - 2" ( - 5 mm) pipe. : 9 lbs. (8.6 kg), Power Drive Only. Length: 24 in. (6 cm). Motor: Universal 020 Watt, 20 or 5 volt, Hz. Switch: Heavy-duty paddle switch with safety lock-off device (automatically locks off when released). Separate FORWARD/RELEASE switch. Gear Head: Spur gear reduction/face gear drive. All shafts, ball and needle bearing mounted. Permanently lubricated gear housing. Gear Housing: Die cast aluminum Body & Handle: Durable, heavy-duty, fi berglass-reinforced, industrial plastic. Spindle Speed: 2 RPM. Die Heads: ½", ¾",, ½", 2" (type -R). Support Arm: 69. Die Head Adapter: Used with 8 through ¼" die heads. Carrying Case V ½"-2" NPT with Case & Support Arm V Kit Less Die Heads with Case & Support Arm V ½"-2" NPT with Support Arm, Export with Support Arm Accessories Oiler with Gallon Nu-Clear Oil Support Arm Carrying Case Die Head Adapter "-2½" Tristand Chain Vise "-6" Tristand Chain Vise "-¼" -R Die Heads (See pages ) 4.4 For Die Heads, see page 4.5. For Dies, see page 4.7. See page 4.2

15 700 Power Drive Heavy-duty hand-held power drive. Features reversible 5V or 20V universal motor. Capacity 8"-2" (mm-50mm) pipe. Designed for RIDGID 2R die heads. Other RIDGID die heads (OOR, OORB, R) using adapters, threading 2½" through 6" (62mm-50mm) with 4/6 geared threaders. CSA approved. Approved to UL standards (NRTLC). Technical Specifications Motor: Universal, ½ HP, 5V or 20V Hz. Switch: Double-throw reversible. Gear Head: All-spur gear reduction. Spring-loaded adapter pawl. Hardened steel spindle gear. Body: Cast aluminum. Spindle Speed: 2 RPM (no load). Capacity: 8"-2" Pipe (0mm-50mm) ¼"-" (6mm-25mm) Bolt (using OO-RB) : 25 lbs. ( kg) Power Drive only. Length: 28¼" (7.7 cm). Optional Carrying Case Pipe Threading Capacity Rod Threading Capacity Max. Geared Threader Capacity in. mm in. mm in. mm V Hz Only -50 ¼ V Hz Only -50 ¼ Suppport Arm Accessories Adapter for OO-R and OO-RB Adapter for O-R Adapter for -R ½ Adapter for -R Square Drive Adapter - 5 6" 5¼ Support Arm for B-7-X Metal Carrying Case for 700 and Accessories Oiler w/ Gal. Nu-Clear Thread Cutting Oil 20½ Gearhead Motor Grease 0.5 See page 4.2 Use the 700 Support Arm to help resist torques developed when threading pipe greater than " in diameter. 4.5

16 Power Threading Machines 00 Power Drive RIDGID speed chuck. Reversible ½ HP universal motor. Capacity: 8"-2" (mm-50mm) pipe, 2¼"-4" with 4, and 4"-6" with 6 Geared Threaders; ¼"-2" (6mm-50mm) rod. Recessed On/Off/Reverse switch. CSA approved. Approved to UL standards (NRTLC). Technical Specifications Motor: ½ HP, universal, reversible motor, single-phase, Hz, 5V (20V available). Switch: Heavy-duty FOR/OFF/REV and Integral Foot Switch. Chuck: RIDGID speed chuck with replaceable rocker-action jaws. Spindle Speed: 8 RPM (57 RPM available). Rear Centering Device: Cam-action turns with chuck. Support Bar: Heavy-duty (2). Spindle Speed RPM Pipe Threading Capacity Rod Threading Capacity Max. Geared Threader Capacity in. mm in. mm in. mm Complete 5V, Hz (NPT) 8-50 ¼ Complete 5V, Hz (NPT) ¼-½ Only 5V, Hz 8-50 ¼ Only 5V, Hz ¼-½ Only 20V, Hz 8-50 ¼-½ Only 20V, Hz Export 8-50 ¼ A Complete 20V, (NPT) Export 8-50 ¼ A Complete 20V, (BSPT) Export 8-50 ¼ Other voltages available upon request. Export machines equipped with special power cord sets. 00A Complete consists of 00PD, 206 Stand, A Carriage, 4 Reamer, 60 Cutter, 0 Oil Pan, 8A Die Head with 2"- 4" and "-2" Universal Dies. 4.6 See page 4.2

17 2 00 Complete Convert your 00 Power Drive into a portable threading machine. Add these accessories for enhanced fi eld performance. Die heads and dies for use with 00 Power Drive with carriage. (see page 4.27) 2 60 Cutter: Capacity: 8"-2" (mm-50mm) pipe, ¼"- 7 8" (6mm-2mm) rod with F- wheel, 5 6"-" (8mm-25mm) with E-02 cutter wheel. 4 4 Reamer: Positive-locking, 5-fl ute cone, right-hand 8"-2" (mm-50mm). Special E86 RH/LH combination reamer cone available. 4 Carriage with lever Stand or Transporter Clip-On Tool Tray. 48 Oiler. (see page 4.2) 89 Nipple Chuck. (see page 4.4) 2 Transporter. Add a 04 retrofi t kit to convert the 00 power drive to automatic oiling: Gear head assembly with oil pump Oil pan assembly Oil spout Support bar Necessary connectors One gallon of Nu-Clear thread cutting oil 2 Transporter 452 Tray Accessories Stand for 00 Power Drive Stand for 00 Power Drive Export Transporter (for Power Drives and Tristand Vises) 4¼ Carriage with 2 Lever Carriage Feed Lever Oiler with gallon of Nu-Clear Thread Cutting Oil 20½ Reamer for Carriage with Lever Cutter for Carriage 8½ A Universal Q.O. Die Head Only, Right-Hand Only 2½ A Self-Opening Die Head Only, Right-Hand Only ½ Nipple Chuck Complete, /2"-2" (2mm-50mm) 0½ Clip-On Tool Tray * Retrofi t Kit (8 rpm) 7¾ * Retrofi t Kit (57 rpm) 7¾ Jaw Inserts for Coated Pipe ½ E-86 LH/RH Reamer Cone Gearhead Motor Grease 0.5 See page 4.2 For Die Heads, see page 4.0. For Dies, see page

18 55A Automatic Threading Machine 55A with optional 200A Machine Stand Standard Equipment 55A automatic threading machine with foot switch. One () 8A universal, quick-opening die head (for models 86/87 die heads). One () 4 reamer. One () 820 cutter. One () set 2"- 4" universal high-speed dies. One () set " - 2" universal high-speed dies. One () gallon stainless steel premium oil. Two (2) hex wrenches. One () spare E-02 cutter wheel. Capacities Pipe: 8"-2" (mm-50mm) 2 2"-4" (62mm-00mm) with 4 geared threader. Bolt: 5 6"-2 (8mm-50mm). The 55A maintains the ruggedness of the industry workhorse while adding features that make the threading operation more productive. A large chip tray and oil reservoir make the 55A ideal for longer uninterrupted threading. The 55 features a high clearance carriage that makes the threading operation easier and a generous top cover area that is ideal for keeping tools and work related materials handy. The 55A is designed around maximum uptime with the upgrades that matter most to the pipe working professional. Users also benefi t from the part commonality between the 55, the 55A Automatic and other RIDGID equipment. Features Automatic chuck. -speed (6/46/58 RPM) transmission. Large.75 gallon oil reservoir. 00% greater chip tray capacity. Generous top cover area for keeping tools and fittings handy. High clearance carriage. Can be used with geared threader 4. Uses 86/87 semi-automatic, 85A self opening or 8A quick-opening die heads. Length gauge for quick, accurate cut-off. CSA approved. Approved to UL standards (NRTLC). Technical Specifications Motor: 2 HP, single-phase, 5V, 60 Hz, 20 Amp reversible induction motor. Switches: FOR/OFF/REV and Integral safety foot switch. Chuck: automatic with four reversible forged jaws. Rear Centering Device: automatic, centering only. Cutters: self-centering, full-floating. Two models available: One () Standard. 820 Wheel-Type Cutter, pipe capacity 8"-2" (mm-50mm), bolt capacity 4"-" (6mm-25mm). Two (2) Optional. 82 Blade-Type cutter, pipe capacity 2"-2" (2mm-50mm). See ordering chart. Spindle Speed: speed 6/46/58 RPM. Reamer: 5-fl ute cone, RH, 8"-2" (mm-50mm). Oil Pump: self-priming gerotor oil pump. RH/LH combination reamer available. 4.8 See page 4.2

19 55A Standard Machines Machine Stands 5V Hz 55A Machine Accessories Cutter RPM Chuck Die Head Volt A Automatic Machine only 820 6/46/58 Automatic 5V A 2"-2" NPT Automatic 820 6/46/58 Automatic 8A 5V A 2"-2" NPT Automatic 820 6/46/58 Automatic 86/87 5V 60 6 Machines listed as 2"-2" include standard equipment. Machine only includes standard equipment less all die heads and dies. Please use catalog item numbers. when ordering. 00A Reamer Wheel-Type Cutter A Universal Leg & Tray Stand A Universal Wheel & Tray Stand A Universal Wheel & Cabinet Stand Nipple Chuck Complete 2"-2" Gearhead Motor Grease Adapter Kit for 89 Nipple Chuck A 4 Mounting Kit A Left Hand Threading Kit U Die Head Rack U Die Head Rack A NPT Die Head Quick-Open R.H A NPT Die Head Self-Open R.H NPT Die Head Quick-Open L.H A BSPT Die Head Quick-Open R.H A BSPT Die Head Self-Open R.H Bolt Die Head Quick-Open R.H./L.H. 4"-" Bolt Die Head Quick-Open R.H./L.H. 8"-2" "- 4" Semi-Automatic Die Head "-2" Semi-Automatic Die Head 5.9 Note: Mono Die Heads available, 8", 4", 8", 2", 4", ", 4", 2", 2". All Die Heads are through-head oiling. Dies: All Universal Pipe and Bolt Dies; all 500B Bolt Dies, See pages A Steel Cabinet Features 7-gauge steel walls and welded construction. Two (2) internal and one external storage shelves. Oversized bi-fold door with steel clasp. Cut-outs for power cord and foot switch storage. Two (2) drain plugs for easy cleaning. 200A with Steel Cabinet See page 4.2 Use High Speed Dies when threading at 45 RPM or greater. 4.9

20 55 Threading Machine 55 Standard Equipment 55 threading machine with foot switch: One () 8A universal quick opening die head. One () 4 reamer. One () 820 cutter. One () set 2" - 4" universal alloy dies. One () set " - 2" universal alloy dies. One () gallon premium oil. Four (4) hex wrenches. One () spare E-02 cutter wheel. Capacities Pipe: 8"-2" (mm-50mm) 2 2"-4" (62mm-00mm), 4"-6" (00mm-50mm) with 4 and 6 geared threaders Bolt: 4"-2" (6mm-50mm) The 55 maintains the ruggedness of the industry workhorse while adding the features that makes the threading operation more productive. A large chip tray and oil reservoir make the 55 ideal for longer uninterrupted threading. The 55 features a high clearance carriage making the threading operation easier and a generous top cover area that is ideal for keeping tools and work related materials handy. The 55 is designed around maximum uptime with the upgrades that matter most to the pipe working professional. Users also benefi t from the part commonality between the 55, the 55A Automatic and other RIDGID equipment. Features Large.75 gallon oil tray. 00% larger chip tray. Generous top cover for keeping tools and fi ttings handy. High clearance carriage. Speed chuck with rocker-action jaws centers and grips work piece instantly. Can be used with geared threaders s 4 and 6. Uses 86/87 semiautomatic, 85A self-opening or 8A quick-opening die heads. Length gauge for quick, accurate cut-off. CSA approved. Approved to UL standards (NRTLC). Technical Specifications Motor: 2 HP, single-phase, 5V, Hz, 5 amp reversible universal motor. Switches: FOR/OFF/REV and Integral safety foot switch. Chuck: Speed Chuck with replaceable rocker-action jaw inserts (). Rear Centering Device: Cam-action, turns with chuck. Cutters: Self-centering, full-fl oating. Two models available: One () Standard. 820 Wheel-Type Cutter, pipe capacity 8"-2" (mm-50mm), bolt capacity 4"-" (6mm-25mm). Two (2) Optional. 82 Blade-Type cutter, pipe capacity 2"-2" (2mm-50mm). See ordering chart. Spindle Speed: 6 RPM standard (no load), 54 RPM model also available. Reamer: 5-fl ute cone, RH, 8"-2" (mm-50mm). Oil Pump: Self-priming gerotor oil pump. RH/LH combination reamer available Always use high quality, clean oil for the best thread results. See page 4.2

21 55 Standard Machines 5V Hz Cutter RPM Volt lb /2"-2" NPT V Machine Only V /2"-2" NPT V V Hz /2"-2" NPT V kg Machine Stands 00A 55 International Standard Machines Cutter RPM Volt 20V Hz s /2"-2" BSPT V Machines Listed as /2"-2" include Standard Equipment. Machine Only includes Standard Equipment less all Die Heads and Dies. All machines have Hz Universal /2 HP single-phase motors. Note: NPT Dies are for NPT Die Heads only. BSPT Dies are for BSPT Die Heads only. Please use Item Nos. when ordering. Use High Speed Dies for machines of 54 or more RPM. Accessories Die Heads and Dies (page ) Die Head Racks (page 4.27) Stands Three s Available Thread Cutting Oil (page 4.2) Nipple Chuck (page 4.) 55 Machine Accessories 50A Reamer Wheel-Type Cutter Blade-Type Cutter Jaw Inserts for Coated Pipe A Universal Leg & Tray Stand* A Universal Wheel & Tray Stand* A Universal Wheel & Cabinet Stand* Machine stand adapter bracket for 55 s built before 996.* MJ- 55M Left Hand Threading Kit Drive Link Assembly for Drive Link Assembly for High Clearance Carriage for Drive Bar for Nipple Chuck Complete 2"-2" "- 4" Semi-Automatic Die Head "-2" Semi-Automatic Die Head Gearhead Motor Grease 0.5 *To attach a pre to a 00A, 50A, or 200A Stand, a #58007 Adapter Kit must be used. Steel Cabinet Features 7-gauge steel walls and welded construction. Two (2) internal and one external storage shelves. Oversized bi-fold door with steel clasp. Cut-outs for power cord and foot switch storage. Two (2) drain plugs for easy cleaning. 200A with Steel Cabinet See page

22 20 Oil-less Threading Machine Capacity Pipe: 2" " (2-25mm) The RIDGID 20 Oil-less Threading Machine offers an unbeatable combination of portability and clean operation in a rugged package designed for jobsite threading. With the 20, you can thread virtually anywhere: in basements, on rooftops, even in fi nished rooms! Thread where you install and save time and effort. Features Oil-less operation provides clean, cool, virtually dry thread. Light-weight, portable design only 59 lbs. Oil-less Gold Dies produce superior quality threads. Self-contained with all the tools needed to cut, ream and thread. Compact foot switch with integral storage clip. Two carrying handles. CSA approved. Approved to UL standards (NRTLC). Technical Specifications No Oil 20 Standard Equipment 20 Oil-less Threading Machine with Foot Switch. One () 60 Quick-Open Die Head. One () 4 Reamer. One () 54 Cutter with Cutter Wheel. One () Set 2"- 4" Oil-less Gold Dies. One () Set " Oil-less Gold Dies. One () Quart Thread Cutting Coolant. Motor: 2 HP, 5V universal Hz. Motor Control: Heavy-Duty Toggle ON/OFF with integral Foot Switch. Spindle Speed: 25 RPM right hand operation. Chuck: Hammer-type with replaceable inserts; cam action rear chuck. Coolant System: Through-the-head with integral coolant reservoir; self-priming gerotor pump; 20 oz. reservoir capacity. Cutter: 54. Reamer: 4. Machines " - " NPT, 5V, Hz Die Heads " - " NPT, Quick-Opening, RH 5.0 Dies " - 4" NPT Oil-less Gold, RH " NPT Oil-less Gold, RH 0.5 Coolant Qt. Thread Cutting Coolant Stands Folding Stand Lubricant 4620 Gearhead Grease 0.5 Call for BSPT and 20V s. Please Note: The 20 is warranted for use only with RIDGID Thread Cutting Coolant and RIDGID Oil-less Gold Dies. RIDGID Thread Cutting Coolant and RIDGID Oil-less Gold Dies are not for use with any other RIDGID threading equipment. 4.22

23 25 Threading Machine Capacities Pipe: 4"- 2" (6mm-7mm). Bolt: 5 6"-" (6mm-25mm). Features Compact, lightweight design. One-piece aluminum housing. Two easy-to-use carrying handles. Integral foot switch hanger. Powerful motor and transmission. Through die head oiling. Adjustable oil fl ow control. CSA approved. Approved to UL standards (NRTLC). Technical Specifications 25 Motor: 2 HP universal motor Hz. Motor Control: ON/OFF heavy duty switch and integral foot switch. Spindle Speed: 44 RPM right hand operation. Front Chuck: Hammer type with replaceable rocker action jaw inserts. Rear Centering Device: Cam action. Cutter: 72. Reamer: 44, 4-2". Oiling: Through die head adjustable. Pump: Self-priming constant fl ow, gerotor type "- 2" NPT, 5V, 60Hz 69 0 *Call for BSPT and 20V s. Accessories: 20 Mounting Stand. 5 4"-" Bolt Die Head. 29 Nipple Chuck 2"- 2". Standard Equipment One () 8A Quick Opening Die Head. One () Set 2"- 4" Universal Alloy NPT Dies. One () Set "- 2" Universal Alloy NPT Dies. One () 44 Five Fluted Reamer 4"- 2". One () 72 Cutter with Cutter Wheel. One () Gallon Nu-Clear Oil. Machine Accessories Tripod Stand Nipple Chuck, NPT Bolt Die Head 4"-" "- 4" Semi-Automatic Die Head "-2" Semi-Automatic Die Head Gearhead Motor Grease 0.5 See page

24 00 Compact Threading Machine Capacity Pipe: 8" - 2" (mm-50mm). Bolt: 4" - 2" (6mm-50mm). Features Heavy-duty proven performance. Lightweight, portable design. Fast transport and set-up. Self-Contained Oil System with adjustable fl ow control. Versatility for threading and grooving. Quiet operation. CSA approved. Approved to UL standards (NRTLC). Technical Specifications Motor: 2 HP, 5V universal Hz. Motor Control: Heavy duty rotary FOR/OFF/REV with integral foot switch. Spindle Speed: 8 RPM (52 RPM available). Chuck: Hammer-type with replaceable, rocker-action jaw inserts. Oiling System: Through-the-head, with integral oil reservoir. Self-priming, constant-fl ow, gerotor pump. Cutter: 60, roll-type cutoff, self-centering, full-fl oating. Reamer: 44, 8"-2", fi ve flute cone, right hand only. 00 Compact shown with optional 250 Folding Wheel Stand Standard Equipment 00 Compact Threading Machine: One () 8A Quick-opening die head. One () 44 Reamer. One () 60 Cutter with E-02 Cutter Wheel. One () Set 2" - 4" Alloy Universal Dies. One () Set "- 2" Alloy Universal Dies. One () Gallon Nu-Clear Threading Cutting Oil. Machines Compact 2" - " NPT, 5V, Hz Compact Kit 2" - 2" NPT, 5V, Hz includes 250 Folding Wheel Stand Compact 52RPM 2" - 2" NPT, 5V, Hz Compact Kit 52RPM 2" - 2" NPT, 5V, Hz includes 250 Folding Wheel Stand Compact 2" - 2" BSPT, 20V, Hz (Aust. only) Compact 2" - 2" NPT, 20V, Hz (Export only) Die Heads A 8" - 2" NPT, Self-Opening, RH A 8" - 2" NPT, Quick-Opening, RH " - " Bolt, Quick-Opening, RH/LH " - 2" Bolt, Quick-Opening, RH/LH "- 4" Semi-Automatic Die Head "-2" Semi-Automatic Die Head 5.9 Accessories Groover Adapter Bracket for 00 Power Drive version of Nipple Chuck, 2" - 2" NPT Gearhead Motor Grease 0.5 Stands (see page 4.26) Folding Wheel Stand A Universal Leg & Tray Stand A Universal Wheel & Tray Stand A Universal Wheel & Cabinet Stand See page 4.2

25 822-I Threading Machine Capacities Pipe: 8"-2" (mm-50mm) 2 2"-4" (62mm-00mm) with 4 geared threader Bolt: 4"-2" (6mm-50mm) Features Heavy Duty Automatic Chucking. Threads a wide range of material including black and galvanized pipe, stainless steel, IMC, PVC and heavy-wall conduit. Induction motor (8 db) delivers constant 45 or 6 RPM as required. Constant and proper lubrication of dies and workpiece with through-head oiling. Triple fi ltration provides for longer oil pump life and clean threads. Special jaw inserts allow for quick, easy replacement. Technical Specifications 822-I Motor: 2 HP, single-phase, 60 Hz or 50 Hz, induction. Motor Control: Open/Off/Close, heavy-duty rotary type switch and integral safety foot switch. Spindle Speed: 45 and 6 RPM, right-hand, can be adapted to left-hand operation. Transmission: Two-speed (45 RPM for up to 4" pipe and " bolt, 6 RPM for low voltage and higher torque applications). Front Chuck: Automatic gripping/centering. Rear Centering Device: Automatic, centering only. Cutter: 64, 8"-2" full-fl oating, self-centering with E-02 Cutter Wheel. Reamer: 44, 8"-2" right-hand only. Clutch: Shiftable cone type. Oil Pump: Self-priming gerotor. Standard Equipment 822-I threading machine with foot switch. One () 85A universal self-opening die head. One () 44 reamer. One () 64 cutter with E-02 cutter wheel. One () set 2"- 4" universal alloy dies. One () set "- 2" universal high speed dies. One () gallon Nu-Clear oil. Machines I /2"-2" NPT 20V 60 Hz See page

26 Power Threading Machines I Die Heads A NPT Die Head Quick-Open R.H A NPT Die Head Self-Open R.H NPT 8"- 4" Semi-Automatic NPT "-2" Semi-Automatic NPT Die Head Quick-Open L.H A BSPT Die Head Quick-Open R.H A BSPT Die Head Self-Open R.H Bolt Die Head Quick-Open R.H./L.H. 4"-" Bolt Die Head Quick-Open R.H./L.H. 8"-2" 9 4. Note: Mono Die Heads available, 8", 4", 8", 2", 4", ", 4", 2", 2". All Die Heads are through-head oiling. Dies: All Universal Pipe and Bolt Dies; all 500B Bolt Dies. See pages A 822-I Accessories Nipple Chuck 2"-2" NPT Nipple Chuck 2"-2" BSPT Adapter Kit for 89 Nipple Chuck Blade Type Cutter Adapter Kit for 82 Blade Cutter " Geared Threader NPT " Geared Threader BSPT Carriage-Mount Kit for 4 Threader Oil Pan Cover Kit Fitting Breakdown Rail Set E-86 L.H./R.H. Reamer Cone Wheel Type Cutter Conversion Kit for Plastic Coated Pipe Grooving Tool E-050 Saran Tool for D47 45 Bevel, Cutoff Tool for Reamer Gear Grease (224 & 822) 0.5 Note: Pipe Supports, see page A Stands A Universal Leg & Tray Stand A Universal Wheel & Tray Stand A Universal Wheel & Cabinet Stand Folding Wheel Stand w/ 460 Oil Pan Cover Steel Cabinet Stands Four stands are available to satisfy every operational situation. The 406 Folding Wheel Stand provides increased fi eld maneuverability and productivity. 200A with steel cabinet 4.26 See page 4.2

27 85A Self-Opening Die Head 8A Quick-Opening Die Head Optional Die Heads for s 55-55A Die Head How Opened Thread Direction Oil Thru Head Dies Used Pipe Cap. Bolt Cap. Used Machine NPT Die Head A Universal Q.O. RH Yes Univ. 8"-2" 4"-2" A Universal S.O. RH Yes Univ. 8"-2" 4"-2" Universal S.A. RH Yes Univ. 8"- 4" Universal S.A. RH Yes Univ. "-2" Universal Q.O. LH Yes Univ. 8"-2" Q.O. RH Yes Dual/Bolt 8"- 4" 8.6 Machine BSPT Die Heads A British Universal Q.O. RH Yes Univ. /8-2 4"-2" A British Universal S.O. RH Yes Univ. /8-2 4"-2" British Universal S.O. LH Yes Univ. / Machine Bolt Die Heads Bolt Q.O. RH/LH Yes 500B 4"-" Bolt Q.O. RH/LH Yes 500B 8"-2" 9 4. Machine Mono Die Heads A Mono Q.O. RH Yes Mono 8" A Mono Q.O. RH Yes Mono 4" A Mono Q.O. RH Yes Mono 8" A Mono Q.O. RH Yes Mono 2" A Mono Q.O. RH Yes Mono 4" A Mono Q.O. RH Yes Mono " A Mono Q.O. RH Yes Mono 4" A Mono Q.O. RH Yes Mono 2" A Mono Q.O. RH Yes Mono Bolt Die Head Mono Die Head Die Head Racks For All Machine Die Heads U 4 Heads U 6 Heads Die Head Differences Self-Opening Manual release for user-specifi ed thread lengths. Quick-Opening Automatic release for repeatable number of threads. Bolt Specially for bolt threader. Mono Dedicated to a specifi c size of thread. Semi-Automatic Can be quickly adjusted from size to size with manual release A-822 Machines and 00 and 00-A w/carriage. Q.O. = Quick-Opening Manually fl ip throwout lever to retract dies when thread length is cut. S.A. = Semi Automatic (Dies retract automatically on depressing handle) S.O. = Self-Opening Trigger foot automatically retracts dies when thread length is cut. 8A Die Head replaces the 8 and 84 Die Heads. 85A Die Head replaces the 85 and 845 Die Heads. 500A Die Heads replace the 500 Mono Die Heads. 555 Die Head replaces 55. Note: British Die Heads use British Dies only. Note: 5 and 52 Die Heads replace 500B Die Head. Individual Machine Die Heads do not include dies. 86/87 Semi-Automatic Die Head See page

28 224 Threading Machine 224 Standard Equipment 224 threading machine with foot switch. One () 74 (94) 2 2"- 4" receding self-opening die head. One () 7 (9) 4"- 2" universal self-opening die head. One () set 2"- 4" universal alloy dies. One () set " - 2" universal alloy dies. One () set 2 2"- 4" 224 high-speed dies. One () gallon Nu-Clear oil. Three () hex keys. One () spare F-229 cutter wheel. One () 4" combination wrench. One () tool box. One () 744 reamer. One () 764 cutter. Capacities Pipe: 4"-4" (6mm-00mm) 4"-6" (00mm-50mm) with 6 Geared Threader. Bolt: 4"-2" (6mm-50mm). Features Threads 4"-2" pipe at 6 RPM and 2 2"-4" at 2 RPM. The 224 threads a wide range of pipe including black, galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 0 Rockwell C. An induction motor insures sound levels well within the limits set by the regulating authorities. A special capacitor-start / capacitor-run motor allows the 224 to thread a full range of material where voltage drop is experienced. 4"-2" Universal Die Head; 2 2"-4" receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads. Constant and proper lubrication of dies and workpiece with through-head oiling. CSA approved. Approved to UL standards (NRTLC). Technical Specifications Motor: 2 HP, single-phase, 60 Hz or 50 Hz, induction type. Motor Control: Reverse/Off/Forward, heavy-duty rotary-type and integral foot switch. Spindle Speed: 6/2 RPM. Gear Box: Two-speed gear box : ratio. Chuck: Hammer-type with replaceable rocker-action jaw inserts. Rear Centering Device: Cam action. Cutter: 764 full-fl oating, self-centering 4"-4" with F-229 cutter wheel. Reamer: 744, 4"-4" blade-type. Oiling: Through die head. Pump: Self-priming, gerotor-type, automatic-reversing, constant-flow NPT 20V 60 Hz NPT 240V 60 Hz BSPT20V 60 Hz BSPT 5V 50 Hz BSPT 240V 60 Hz BSPT 220V 50 Hz BSPT GS 220V 50 Hz NPT 220V 50 Hz Stands (see page 4.26) A Universal Leg & Tray Stand A Universal Wheel & Tray Stand A Universal Wheel & Cabinet Stand Steel Cabinet See page 4.2

29 Die Heads for 224 Capacity in. mm Universal Self-Opening R.H., NPT Universal Quick-Opening L.H., NPT Receding Self-Opening R.H., NPT Universal Self-Opening R.H., BSPT Universal Quick-Opening L.H., BSPT Receding Self-Opening R.H., BSPT Quick-Opening Bolt L.H./R.H Quick-Opening Bolt L.H./R.H Cut-Grooving Die Head "- 2" Grooving Die Set "- 2" Grooving Bit only " Grooving Die Set " Grooving Bit only Blade Type Cutter Cut-Off Tool Bit Note: Die Heads do not include dies. All Die Heads are through-head oiling. 7 9 Pipe Dies 2 2"-4" (for 4"-2" see pages ) Capacity in. mm H.S. Dies NPT H.S. Dies BSPT H.S. NPT Dies for Plastic-Coated Pipe H.S. BSPT Dies for Plastic-Coated Pipe H.S. Dies NPT for PVC H.S. Dies BSPT for PVC H.S. Dies NPT for Stainless Steel Beveling Dies Beveling Dies Bevel Guide Set Bevel Bit Only Bevel Bit Only Accessories Capacity in. mm 725 Cut Grooving Die Head "-4" Wheel-Type Cutter "-4" Blade-Type Reamer "-4" Reamer Blade Jaw Insert and Roll Set for PE-Coated Pipe Nipple Chuck (See page 52) Nipple Chuck 2 2" NPT Nipple Chuck " NPT Nipple Chuck 4" NPT Nipple Chuck 2 2" BSPT Nipple Chuck " BSPT Nipple Chuck 4" BSPT A Universal Drive Shaft Gear Grease (224 & 822)

30 Pipe Dies for Machine Die Heads Pipe Dies for use in Universal Die Heads (Nos. 504A, 7, 7, 8A, 85A, 86, 87 and 842) (NPT) Nominal Pipe Size-Threads Per Inch (NPSM) Nominal Pipe Size-Threads Per Inch Die Material or Type 8"-27 4"- 8"-8 2"- 4"-4 "-2"- 2 8"-27 4"- 8"-8 2"- 4"-4 "-2"- 2 Alloy RH High-Speed RH High-Speed LH H.S. For Stainless Steel RH H.S. For Cast Iron H.S. For PVC RH H.S. For Plastic Coated Pipe RH Requires left hand model die head. Pipe Dies for use in British Universal Die Heads (Nos. 504A, 8A, 85A, 86, 87, 856, 9 and 9) (BSPT) (BSPP) Nominal Pipe Size-Threads Per Inch Nominal Pipe Size-Threads Per Inch Die Material or Type 8"-28 4"- 8"-9 2"- 4"-4 "-2"- 8"-28 4"- 8"-9 2"- 4"-4 "-2"- Alloy RH *66655 *66660 *66665 *66670 High-Speed RH *66750 *66755 *66760 *66765 *66795 *66800 *66805 *6680 H.S. For Stainless Steel RH *66770 *66775 *66780 *66785 *6680 H.S. For PVC RH *70755 *70760 H.S. For PE-Coated RH * Requires British Die Head. Conduit Dies for Universal Die Heads (ISO) (BEC) Nominal Conduit Size- Nominal Conduit Size- Pitch in mm Threads Per Inch Die Material or Type 6-2mm mm-.5 2"- 5 8"-8 4"- 4"-6 2"-2 2"-4 Alloy RH Pipe Dies for use in 500A Mono Die Heads Nominal Pipe Size-Threads Per Inch Die Material or Type 8"-27 4"-8 8"-8 2"-4 4"-4 "- 2 4"- 2 2"- 2 2"- 2 (NPT) High-Speed RH H.S. For Stainless Steel RH (NPSM) High-Speed RH Pipe Dies for 4"- 8" Dual Die Heads ( 502) (NPT) Nominal Pipe- Threads Per Inch Die Material or Type 4"- 8"-8 TPI High-Speed RH Pipe Dies for Nos. 54 (LH), 55 (RH), 555 (RH), and 2"- 4" Dual Die Heads. (NPT) (BSPT) Nominal Pipe Size- Nominal Pipe Size- Threads Per Inch Threads Per Inch Die Material or Type 8"-27 4"- 8"-8 2"- 4"-4 4"- 8"-9 2"- 4"-4 Alloy RH High-Speed RH H.S. For Stainless Steel RH Do not mix and match dies. They are cut as a set. See page 4.2

31 Pipe Dies, Bolt Dies for Machine Die Heads Pipe Dies for 424 and 45 Die Head (NPT) (NPSM) Pipe Size-TPI Pipe Size- Die Material or Type 2 2"-4"x8 TPI 2 2"-4"x8 TPI H.S. RH Bolt Dies for Universal Die Heads (Nos. 504A, 7, 8A, 85A, 86, 87 and 9 Die Heads) (UNC) (UNF) (BSW) Rod Size- RH Rod Size- RH Rod Size-RH TPI High-Speed TPI High-Speed TPI High-Speed 4" " "-20 * " " "-8 * " " "-6 * " " "-4 2" " "-2 * " " "-2 * " " "- *6790 4" " "-0 * " " " " "-4NS 4840 "-8 * " " "-7 4" " "-7 *6795 8" " "-6 2" " "-6 * " " "-5 2" " * Requires British Die Head. If Alloy Die is not available, use High-Speed. Bolt Dies for 500B, 5and 54 Die Heads (8 UN) Rod Size- RH TPI High-Speed 8" " " " " " " (2 UN) 2" Beveling Dies For beveling pipe prior to welding. A set of beveling dies consists of three guide segments and one cutting segment. Pipe Size Used in in. mm Die Head Bevel Die Set Universal Bevel Die Set Universal Bevel Die Set Universal Bevel Die Set Universal 0.5 Grooving Dies To groove pipe for mechanical type couplings, consult chart for sizes and die head information. Pipe Size Used in in. mm Die Head 5227 Grooving Die Set Universal Grooving Die Set Universal 0.5 Note: Beveling Dies are available for the 224 threading Machine. See accessories for 224. Note: Universal Dies include 8A and 85A Die Heads. See page 4.2 Keep dies used for stainless steel separate from those used with black iron to avoid material contamination. 4.

32 Bolt Dies for 500B and 5, 52, 54 and 542 Die Heads (Continued) (UNC) (UNF) Rod Size- RH LH Rod Size- RH TPI High-Speed High-Speed TPI High-Speed 4" " " " " " " " " " " " " " " " " " " " " "-4NS " " " " " "-2 4" " " For use with 5, 54 and 500B /4"-" Die Heads For use with 52, 542 and 500B /8"- 2" Die Heads (BSW) Rod Size- RH TPI High-Speed 4" "-8 8" " " "-2 5 8" " " " " " " "-6 5 8" "-5 7 8" "-4 2 For use with 5, 54 and 500B /4"- " Die Heads For use with 52, 542 and 500B /8"-2" Die Heads Dies for Rebar, for use in 500B, 5, 52, 54 and 542 Die Heads Nos. Nos. (UNC) (UNC) RH Rebar Size- RH Rebar Size- High-Speed TPI High-Speed TPI " " " " " " "-0 Acme (S.I.) Series A Metric Series B Metric (ISO) International Standards. Org. Rod Size- TPI RH High-Speed Rod Size- Thread Pitch in. mm RH High-Speed LH High-Speed Rod Size- Thread Pitch in. mm RH High-Speed Rod Size- Thread Pitch in. mm RH High-Speed M M M M7-.0 M M M9-.25 M9-.25 M M M M M-.5 4" M M M M M4-.5 M M M M M M M M M M M M " M M M M M M26-.0 M M M M M M0-2.0 M " M M M M "-4 M M M M M M M M M For metric high-speed rebar dies, Series B, ISO, see price list. For use with 5, 54 and 500B /4"-" Die Heads For use with 52, 542 and 500B /8"-2" Die Heads 4.2 See page 4.2

33 Nipple Chucks / Adapters 89 Nipple Chuck Kit Holds short or close nipples for threading. Holds studs for threading. For use with 00 Power Drive, 00 Compact, 55 and 822 (with adapter kit) and 224 Threading Machines. Standard Nipple Chuck includes insert and 5 adapters: 2", 4", ", 4" and 2". (Nipple Chuck body serves as 2" Adapter.) NPT Nipple Chuck 2"-2" BSPT Nipple Chuck 2"-2" D-80-X Nipple Chuck Wrench Adapter Kit for 822 Machine NPT Nipple Chuck for Pipe Adapters For use with 89 Nipple Chuck to allow close nipple threading of all sizes of pipe smaller than 2 inches. Size (in.) NPT Standard BSPT Standard E E E-70-B E E-7-B E E-72-B E E-7-B E E-74-B E E-75-B E E-76-B See page