Weighs only 58 pounds Built-in carrying handle Includes: 1 / 2" 1" die head Foot switch. Front and Rear Chucks Unique One Blade Reamer
|
|
|
- Dennis Hoover
- 6 years ago
- Views:
Transcription
1 PIPE THREADING MACHINES 7991 SIDEKICK II PIPE THREADER The Wheeler-Rex Model 7991 is a full-featured threading machine for 1 / 4" to 1" pipe. Featuring front and rear chucks, an auto-open auto-oiling notch-type die head, safety auto shut off, larger carriage & cutter handles and a unique one blade reamer. Model 7991 Features: Auto open notch die head Safety auto shut off Front and rear chucks One blade reamer Auto-oiling die head 1" pipe threading time Large scrap tray 16 seconds Weighs only 58 pounds Built-in carrying handle Includes: 1 / 2" 1" die head Foot switch Two sets of dies: Spare cutter wheel. 1 / 2" 3 / 4" and 1" Specifications: Standard Capacity: 1 / 2" 1" Voltage: 115V Motor: 400W series, single phase Free Speed: 55 RPM Net Weight: 58 lbs. Dimensions: 15" x 11" x 12" Optional: 1 / 4" 3 / 8" NPT dies 1 / 4" 1" NPT Die Head 841 Stand Gross weight, packed lbs. (28kg) Net weight lbs. (26kg) 7992 Same as 7991 except comes complete with manual opening die head for 1 / 4" 1" and 1 / 2" 3 / 4" and 1" NPT dies. Gross weight, packed lbs. (31kg) Net weight, packed lbs. (29kg) 7993 Same as 7991 except comes complete with two 1 / 2" 1" quick opening die heads and one each 1 / 2" 3 / 4" and 1" NPT dies. Gross weight, packed lbs. (32kg) Net weight, packed lbs. (30kg) 7998 Same as 7991 except comes complete with 220V motor. Gross weight, packed lbs. (28kg) Net weight, packed lbs. (26kg) THREE YEAR WARRANTY, INCLUDING ELECTRIC MOTORS Front and Rear Chucks Unique One Blade Reamer Model 7991 shown on optional 841 Stand Notch-Type Auto OpenDie Head Oils thru the die head 18 Carriage and Cutter Handles are Larger
2 WHEELER-REX Professional Tool Catalog Issue Lightweight, easy to use, manual opening automatic oiling die head, compact and efficient. Completely equipped to cut, thread, and ream. Features: For 1 / 2" to 1 / 2" pipe, 110V/120V, single phase 600W series motor, average noise level: 85db, maximum amperage under load: 12.2, no load RPM: 56 Includes: 1 / 4" 1 1 / 2" die head, two sets of NPT dies: 1 / 2" 3 / 4" and 1" 1 1 / 2", spare cutter wheel, foot switch, 3 legs. Optional: 1 / 4" 3 / 8" NPT, 5 / 16" 1 1 / 2" UNC bolt, 1 / 2" 1 1 / 2" NPSM Gross weight, packed lbs. (57kg) Net weight lbs. (48kg) 8090 Features complete interchangeability with the Model 300 dies and die heads. This portable and compact, high-performance threading machine has a self-opening die head and through the die head oiling. Completely equipped to cut, thread and ream Die Head Features: Includes: For 1 / 2" to 2" pipe, 110/120 V, single phase 700W series motor, average noise level: 85db, maximum amperage under load: 15.3, no load RPM: 39 1 / 2" 2" die head, two sets of NPT dies: 1 / 2" 3 / 4" and 1" 2", spare cutter wheel, foot switch, 4 legs. Gross weight, packed lbs. (70kg) Net weight lbs. (64kg) 8096 Same as 8090 except comes with two Die Heads. Gross weight, packed lbs. (72kg) Net weight lbs. (63kg) 8097 Same as 8090 except comes with Universal Die Head for 1 / 8" 2". Gross weight, packed lbs. (72kg) Net weight lbs. (63kg) 8098 Same as 8090 except comes with 220V motor. Gross weight, packed lbs. (80kg) Net weight lbs. (74kg) 6090 Portable and compact, with self opening die head and through the die head oiling. Completely equipped to cut, thread, and ream. Features: For 1 / 2" to 2" pipe, 110/120 V, single phase 600W series motor, average noise level: 84db, maximum amperage under load: 18.5, no load RPM: 41 Includes: 1 / 2" 2" die head, two sets of NPT dies: 1 / 2" 3 / 4" and 1" 2", spare cutter wheel, foot switch, 3 legs. Optional: 1 / 4" 3 / 8" NPT, 3 / 4" 2" beveling and grooving, 5 / 16" 2" UNC bolt, 1 / 2" 2" NPSM Gross weight, packed lbs. (69kg) Net weight lbs. (59kg) 19
3 PIPE THREADING MACHINES CONTINUED 6790 The 6790 features a self-opening die head, with through die head oiling. Ultimate accuracy with quick changes between pipe sizes, producing quality threads. The 6790 offers adjustable thread length, three-stage oil filtration system, and a sturdy three flute reamer that covers the entire 1 / 2" 4" range. The 6790 is a three speed machine that is powered by a durable condenser motor, with an extremely low noise level. Completely equipped to cut, thread, and ream. Features: For 1 / 2" to 4" pipe, 110V/120V or 220V/230V, single phase 1KW condenser motor, average noise level: 72db, maximum amperage under load: 18.5 no load RPM: 15/27/48 Includes: Two die heads: 1 / 2" 2" and 2 1 / 2" 4", three sets of NPT dies: 1 / 2" 3 / 4", 1" 2" and 2 1 / 2" 4", spare cutter wheel, foot switch, 4 legs and built-in tool tray. Optional: 1 / 4" 3 / 8" NPT, 3 / 4" 4" beveling and grooving, 5 / 16" 2" UNC bolt, and 1 / 2" 4" NPSM Gross weight, packed lbs. (178kg) Net weight lbs. (148kg) QUICK ADJUSTING NOTCH-TYPE DIE HEAD 6793 Same as 6790 except with THREE (3) self-opening NOTCH-TYPE. This offers accuracy, quick changes between pipe sizes and eliminates switching dies when changing pipe sizes. Completely equipped to cut, thread, and ream. Gross weight, packed lbs. (189kg) Net weight lbs. (157kg) 6794 Same as 6790 except with a BLADE-TYPE CUTTER, which is designed for plastic lined pipe, as well as standard steel pipe. Completely equipped to cut, thread, and ream. Features: For 1 / 2" to 4" pipe, 110V/120V or 220V/230V, single phase 1KW condenser motor, average noise level: 72db, maximum amperage under load: 18.5 no load RPM: 15/27/48 Includes: Two die heads: 1 / 2" 2" and 2 1 / 2" 4", three sets of NPT dies: 1 / 2" 3 / 4", 1" 2" and 2 1 / 2" 4", spare cutter wheel, foot switch, 4 legs and built-in tool tray. Optional: 1 / 4" 3 / 8" NPT, 3 / 4" 4" beveling and grooving, 5 / 16" 2" UNC bolt, and 1 / 2" 4" NPSM Gross weight, packed lbs. (185kg) Net weight lbs. (152kg) 6590 This machine has self opening notch type die heads with through die head oiling. These die heads offer accuracy and quick changes between pipe sizes, while providing quality threads. The 6590 is totally gear driven and powered by a condenser motor, producing extremely low noise levels. Quiet operation permits use in hospitals, factories, and in other locations where noise can be a problem. Completely equipped to cut, thread, and ream. Features: For 2 1 / 2" to 6" pipe, 110/120V or 220V/230V, single phase.75kw condenser motor, average noise level: 76db, maximum amperage under load: 14.5, no load RPM: 6.1/20.2 Includes: Two die heads: 2 1 / 2" 4" and 5" 6", two sets of NPT dies: 2 1 / 2" 4", and 5" 6", foot switch, 4 legs and Blade-Type Cutter. Optional: 21/2" 6" beveling and grooving Gross weight, packed lbs. (233kg) Net weight lbs. (206kg) 20
4 WHEELER-REX Professional Tool Catalog Issue 1 THREADING ACCESSORIES & CUTTING FLUID THREADER CARTS Collapsible Cart for Wheeler-Rex 8090 Pipe Threader...51 lbs. (23kg) Collapsible Cart for Wheeler-Rex 7090 Pipe Threader...51 lbs. (23kg) Collapsible Cart for Wheeler-Rex 6090 Pipe Threader...51 lbs. (23kg) Collapsible Cart for 300 Style Pipe Threader...51 lbs. (23kg) Threader Cart w/out Toolbox for 6390/6790/6794/ lbs. (41kg) Threader Cart with Toolbox for 6390/6790/6794/ lbs. (64kg) Threader Cart w/out Toolbox for lbs. (41kg) Threader Cart with Toolbox for lbs. (64kg) NIPPLE ATTACHMENTS / 2" Nipple Chuck/Internal Pipe Wrench...5 oz. (140g) / 4" Nipple Chuck/Internal Pipe Wrench...9 oz. (252g) " Nipple Chuck/Internal Pipe Wrench...10 oz. (280g) Set of 3 Nipple Chucks (87050, & 87100)...24 oz. (672g) / 2" NPT Nipple Chuck... 3 lb. (1.4kg) / 4" NPT Nipple Chuck... 3 lb. (1.4kg) " NPT Nipple Chuck... 3 lb. (1.4kg) / 4" NPT Nipple Chuck... 4 lb. (1.8kg) / 2" NPT Nipple Chuck... 4 lb. (1.8kg) " NPT Nipple Chuck... 5 lb. (2.3kg) / 2" NPT Nipple Chuck... 7 lb. (3.2kg) " NPT Nipple Chuck... 8 lb. (3.6kg) " NPT Nipple Chuck lb. (5kg) 841 PORTABLE THREADER STAND Light weight folding stand. Designed to fit model 7991 Wheeler-Rex pipe Threading Machine...30 lbs. (14kg) WHEELER-REX PIPE THREADING OIL Wheeler-Rex Pipe Threading Oil gives you premium performance at a reasonable price. Blended to thread Stainless Steel, Galvanized as well as Carbon Steel means you only need one oil for all your needs. Low odor and transparent appearance make this fluid pleasant to use in addition to creating quality threads and long die life Gallon ThreadMaster Oil...8 lbs. (3.5kg) Quart ThreadMaster Oil...2 lbs. (.9kg) Quart ThreadMaster Oil...4 lbs. (1.8kg) Gallon Pail of ThreadMaster Oil...42 lbs. (19kg) 60655* 55 Gallon Drum of ThreadMaster Oil lbs. (197kg) * Contact factory for current market price. 21
5 THREADING ACCESSORIES CONTINUED 6990 PONY 1 / 4 " 3 / 4 " MAXIMUM PIPE RANGE / 4" 3 / 8" NPT (60131 Die Head) / 2" 3 / 4" NPT (60130 Die Head) / 2" 3 / 4" NPT/Self Opening Notch Style Cutter Wheel Chuck Jaw Insert Set Motor Brush Set Reamer Cone 6991 SIDEKICK 1 / 4 " 1" MAXIMUM PIPE RANGE / 4" 3 / 8" NPT (60131 Die Head) / 2" 3 / 4" NPT (60130 & Die Heads) " NPT (60131 Die Head) / 2" 3 / 4" NPSM (60131 Die Head) " NPSM (60131 Die Head) / 4" 1" NPT/Manual Opening Cutter Wheel Chuck Jaw Insert Set Motor Brush Set Reamer Cone 7991 SIDEKICK II 1 / 4 " 1" MAXIMUM PIPE RANGE / 4" 3 / 8" NPT Dies (60131 Die Head) / 2" 3 / 4" NPT Dies (60130, & Die Heads) " NPT Dies (60131 & Die Heads) / 4" 3 / 8" NPT Dies for S.S. (60131 Die Head) / 2" 3 / 4" NPT Dies for S.S. (60131 & Die Heads) " NPT Dies for S.S. (60131 & Die Heads) / 2" 3 / 4" NPSM Dies (60131 & Die Heads) " NPSM Dies (60131 & Die Heads) / 2" 1" NPT/Quick Opening Die Head / 4" 1" NPT/Manual Opening Die Head Cutter Wheel Chuck Jaw Insert Set Motor Brush Set Reamer Blade 22
6 WHEELER-REX Professional Tool Catalog Issue 1 Model 6890 was discontinued 11/1/06 and these parts are interchangeable with Model / 4 " 1 1 / 2 " MAXIMUM PIPE RANGE / 4" 3 / 8" NPT (60120 Die Head) / 2" 3 / 4" NPT (60120 Die Head) " 1 1 / 2" NPT (60120 Die Head) / 16" 18 UNC Bolt (60125 Die Head) / 8" 16 UNC Bolt (60125 Die Head) / 16" 14 UNC Bolt (60125 Die Head) / 2" 13 UNC Bolt (60125 Die Head) / 8" 11 UNC Bolt (60125 Die Head) / 4" 10 UNC Bolt (60125 Die Head) / 8" 9 UNC Bolt (60125 Die Head) " 8 UNC Bolt (60125 Die Head) / 8" 1 1 / 4" 7 UNC Bolt (60125 Die Head) / 2" 6 UNC Bolt (60125 Die Head) / 4" 1 1 / 2" NPT/Manual Opening / 16" 1 1 / 2" UNC Bolt/Manual Opening Cutter Wheel Chuck Jaw Insert Set 8090 Threading Machine Die Head 7090 & / 8 " 2" MAXIMUM PIPE RANGE # 1 / 2" 3 / 4" NPT (70118, & Die Heads) # 1" 2" NPT (70118, & Die Heads) / 8" NPT ( Die Head) / 4" 3 / 8" NPT ( Die Head) / 2" 3 / 4" NPT (70118, & Die Heads) " 2" NPT (70118, & Die Heads) / 8" S.S. ( Die Head) / 4" 3 / 8" S.S. ( Die Head) / 2" 3 / 4" S.S. (70118, & Die Heads) " 2" S.S. (70118, & Die Heads) / 2" 2" NPT/Automatic Opening Die Head for # 1 / 2" 2" NPT/Automatic Opening Die Head for / 8" 2" NPT/Quick Opening Die Head # Cutter Wheel Chuck Jaw Insert Set Oil Reservoir Plug Collapsible Threader Cart for lbs Collapsible Threader Cart for lbs. Included with 7090 basic machine. # Included with 8090 basic machine / 4 " 2" MAXIMUM PIPE RANGE / 4" 3 / 8" NPT (60115 Die Head) / 2" 3 / 4" NPT (60118 Die Head) " 2" NPT (60118 Die Head) / 2" 3 / 4" S.S. (60118 Die Head) " 2" S.S. (60118 Die Head) / 4" Beveling 37.5 (60117 Die Head) " 2" Beveling 37.5 (60117 Die Head) / 4" Grooving (60117 Die Head) " 2" Grooving (60117 Die Head) / 2" 3 / 4" Conduit (60116 Die Head) " 1 1 / 4" Conduit (60116 Die Head) / 2" 2" Conduit (60116 Die Head) / 16" 18 UNC Bolt (60114 Die Head) / 8" 16 UNC Bolt (60114 Die Head) / 16" 14 UNC Bolt (60114 Die Head) / 2" 13 UNC Bolt (60114 Die Head) / 8" 11 UNC Bolt (60114 Die Head) 23
7 THREADING ACCESSORIES CONTINUED 6090 CONTINUED (CONTINUED) / 4" 10 UNC Bolt (60114 Die Head) / 8" 9 UNC Bolt (60114 Die Head) " 8 UNC Bolt (60114 Die Head) / 8" & 1 1 / 4" 7 UNC Bolt (60114 Die Head) / 2" 6 UNC Bolt (60114 Die Head) " 4 1 / 2" UNC Bolt (60114 Die Head) / 4" 2" NPT/Manual Opening / 2" 2" NPT/Automatic Opening / 16" 2" UNC Bolt/Manual Opening / 4" 2" Beveling & Grooving / 2" 3 / 4" NPT/Automatic Opening,/Notch type " 2" NPT/Automatic Opening,/Notch type / 2" 2" Conduit/Manual Opening AND CART Cutter Wheel Chuck Jaw Insert Set Chuck Jaw Insert Set for Plastic Coated Pipe Collapsible Threader Cart lbs / 4 " 2" MAXIMUM PIPE RANGE / 4" 3 / 8" NPT (60115 Die Head.) / 2" 3 / 4" NPT (60112 & Die Heads) / 2" 3 / 4" S.S. (60112 & Die Heads) " 2" NPT (60113 Die Head) " 2" S.S. (60113 Die Head) / 4" Beveling 37.5 (60117 Die Head) " 2" Beveling 37.5 (60117 Die Head) / 4" Grooving (60117 Die Head) " 2" Grooving (60117 Die Head) / 2" 3 / 4" Conduit (60116 Die Head) " 1 1 / 4" Conduit (60116 Die Head) / 2" 2" Conduit (60116 Die Head) / 16" 18 UNC Bolt (60114 Die Head) / 8" 16 UNC Bolt (60114 Die Head) / 16" 14 UNC Bolt (60114 Die Head) / 2" 13 UNC Bolt (60114 Die Head) / 8" 11 UNC Bolt (60114 Die Head) / 4" 10 UNC Bolt (60114 Die Head) / 8" 9 UNC Bolt (60114 Die Head) " 8 UNC Bolt (60114 Die Head) / 8" & 1 1 / 4" 7 UNC Bolt (60114 Die Head) / 2" 6 UNC Bolt (60114 Die Head) " 4 1 / 2 UNC Bolt (60114 Die Head) / 2" 3 / 4" NPT/Automatic Opening/Notch type " 2" NPT/Automatic Opening/Notch type / 16" 2" UNC Bolt/Manual Open / 4" 2" NPT/Manual Opening / 4" 2" Beveling & Grooving / 2" 2" Conduit/Manual Opening AND CART Cutter Wheel Chuck Jaw Insert Set Threader Cart NO Toolbox...90 lbs Threader Cart with Toolbox lbs.
8 WHEELER-REX Professional Tool Catalog Issue , 6793 & / 4 " 4" MAXIMUM PIPE RANGE / 4" 3 / 8" NPT (60115 Die Head) / 2" 3 / 4" NPT (60112, & Die Heads) / 2" 3 / 4" S.S. (60112, & Die Heads) " 2" NPT (60118 & Die Heads) " 2" NPT (60113 Die Head) " 2" S.S. Dies (60113 Die Head) " 2" S.S. (60118 & Die Heads) / 2" 4" Taper or Straight Threads (60106 Die Head) / 2" 4" S.S. (60106 Die Head) / 4" Beveling 37.5 (60117 Die Head) " 2" Beveling 37.5 (60117 Die Head) / 2" 4" Beveling 37.5 (60123 Die Head) / 2" 4" S.S. Beveling 37.5 (60123 Die Head) / 4" Grooving (60117 Die Head) " 2" Grooving (60117 Die Head) / 2" 3 1 / 2" Grooving (60123 Die Head) " Grooving (60123 Die Head) / 2" 3 1 / 2" Grooving Dies for S.S. (60123 Die Head) " Grooving Dies for S.S. (60123 Die Head) / 16" 18 UNC Bolt (60114 Die Head) / 8" 16 UNC Bolt (60114 Die Head) / 16" 14 UNC Bolt (60114 Die Head) / 2" 13 UNC Bolt (60114 Die Head) / 8" 11 UNC Bolt (60114 Die Head) / 4" 10 UNC Bolt (60114 Die Head) / 8" 9 UNC Bolt (60114 Die Head) " 8 UNC Bolt (60114 Die Head) / 8" 1 1 / 4" 7 UNC Bolt (60114 Die Head) / 2" 6 UNC Bolt (60114 Die Head) " 4 1 / 2 UNC Bolt (60114 Die Head) / 2" 3 / 4" Conduit (60116 Die Head) " 1 1 / 4" Conduit (60116 Die Head) / 2" 2" Conduit (60116 Die Head) / 4" 2" NPT/Manual Opening / 2" 2" NPT/Automatic Opening / 2" 4" Taper or Straight Threads/Automatic Opening/Notch Type / 4" 2" Beveling & Grooving / 2" 4" Beveling & Grooving / 2" 3 / 4" NPT/Automatic Opening/Notch type " 2" NPT/Automatic Opening/Notch type / 16" 2" UNC Bolt/Manual Opening / 2" 2" Conduit/Manual Opening AND CART Cutter Wheel Cutter Wheel HSS Cut-Off Blade Cut-Off Blade for HSS 10 Bevel Blade Chuck Jaw Insert Set Chuck Jaw Insert Set for Plastic Coated Pipe Threader Cart NO Toolbox...90 lbs Threader Cart with Toolbox lbs Straight Profile Block Assembly for 2 1 / 2" 4" Wheel Cutoff Assembly Blade Cutoff Assembly Included with 6794 machine. Included with 6793 machine. 25
9 THREADING ACCESSORIES CONTINUED / 2 " 6" MAXIMUM PIPE RANGE / 2" 4" Tapered or Straight (60127 Die Head) / 2" 4" NPT S.S. (60127 Die Head) " 6" Tapered or Straight (60128 Die Head) " 6" NPT S.S. (60128 Die Head) / 2" 4" Beveling 37.5 (60121 Die Head) / 2" 4" S.S. Beveling 37.5 (60121 Die Head) " 6" Beveling 37.5 (60122 Die Head) " 6" S.S. Beveling 37.5 (60122 Die Head) / 2" 3 1 / 2" Grooving (60121 Die Head) " Grooving (60121 Die Head) / 2" 3 1 / 2" Grooving Dies for S.S. (60121 Die Head) " Grooving Dies for S.S. (60121 Die Head) " 6" Grooving Dies for S.S. (60122 Die Head) " 6" Grooving (60122 Die Head) / 2" 4" Beveling & Grooving " 6" Beveling & Grooving / 2" 4" NPT Notch Style Tapered or Straight Automatic Opening " 6" NPT Notch Style Tapered or Straight Automatic Opening ACCESSORIES Cut-Off Blade HSS Cut-Off Blade HSS 10 Bevel Blade Cutter Wheel Straight Profile Block Assembly Threader Cart NO Toolbox lbs Threader Cart with Toolbox lbs Chuck Jaw Insert Set Chuck Jaw Insert Set for Plastic Coated Pipe 7090 mounted on collapsible cart mounted on cart. 26
TOLL FREE WHEELERREX.COM
TOLL FREE 1.800.321.7950 WHEELERREX.COM 1PIPETOOLS2018 2 WE TAKE QUALITY PERSONALLY. TABLE OF CONTENTS Pipe Cutters Pages 4 9 Manual & Ratchet Snap Cutters Soil Pipe Coupling Torque Wrenches Hydraulic
WHEELER-REX
WHEELER-REX www.wheelerrex.com Pipe Threading Equipment Pipe Cutting Tools Hydrostatic Test Pumps Plastic Tools Drilling & Tapping Tools Tube Tools roduct excellence of p 2009 WHEELER-REX Products for
WHEELER-REX Products for 2004
WHEELER-REX Products for 2004 MUDSUCKER Page 24 MINI PIPE SLICE Page 38 SIDEKICK II Page 12 THREADING OIL Page 15 FIRE HOSE TESTER MANIFOLD Page 23 4616 BLADE Page 5 To expedite telephone orders, please
Power Threading Machines
Threading Machines Drive RIDGID speed chuck. Reversible 1 /2 HP universal motor. Recessed On/Off/Reverse switch. Convert a Drive to a portable threading machine. Ideal for use with RIDGID roll groovers.
Threading 4.1. Pipe Capacity (in.) No. of Models. Type
Threading Dependable heavy duty machines for maximum up-time, superior quality threads and minimal threading time. Industry s widest selection of hand and power threading equipment. Manual hammer type
4.1. No. of Models. Pipe Capacity (in.)
Threading Dependable heavy duty machines for maximum up-time, superior quality threads and minimal threading time. Industry s widest selection of hand and power threading equipment. Manual hammer type
Power TOOLS. Power Threading Machine / Model 535. Power Threading / Model Model 300 Compact Threading Machine
Power Threading Machine / Model Pipe: - 2 (mm - 0mm), 2 / 2-4 (62mm - 00mm). 4-6 (00mm - 0mm) with 4 and 6 Rod: - 2 (6mm - 0mm) Motor: / 2 HP, Single-phase, 20V or V, 2-60Hz, Reversible Universal motor.
TAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
300 COMPACT. Main Drive Components. Pipe & Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A.
00 COMPACT Main Drive Components 0 0 0 0 0 0 Screw - x / () 00 Lock Washer () Rear Centering Head Rear Centering Head (Europe) 00 Rear Jaw 0 Step Pin 0 Scroll 0 Back Plate Back Plate (Europe) Rear Centering
10.5 gal. Vertical Oil Lubricated Air Compressor
10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable
Plumbing Tools. General Tools MINI TUBE CUTTER - THPC125. MINI TUBE CUTTER, 3-16mm TUBE CUTTER MIDGET TUBE CUTTERS TUBE CUTTERS TUBE CUTTER
MINI TUBE CUTTER, 3-16mm MINI TUBE CUTTER - THPC125 Designed for use in tight quarters where other cutters won't fit Accurate cutting of copper, brass and aluminium tubing Compact body and sliding block
Spindle Components. Pipe Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
0 Spindle Components 0 Centering Jaw Set 0 Centering Head Centering Scroll 00 Roll Pin / x / () Retaining Ring Rear Spindle Bearing Front Spindle Bearing Drive Shaft Spacer Ring 0 0 Hand Wheel Scroll Jaw
Tube Remover and Installer. and Installer Used for servicing Ford systems produced after Screen Extractor. Ford Aerostar Expansion
gauges A/C FLUSH KIT Easy-to-use system removes refrigerant oil, moisture contaminants from system components lines during retrofitting compressor replacement. Kit includes rubber-tipped flush gun, canister
Tap and Drill Bit Selection Guide
148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard
1822-I/1822-IC. Spindle Assembly. Pipe & Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* *
-I/-IC Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support () Pivot Rod () 0 Shoulder Screw
Main Components Early Style
Pipe & Bolt Threading Machine Main Components Early Style * * 0 0 0 0 0 Service Notes: Ref. No.. Do not substitute bolt longer than / inches. Severe damage to Rear Bearing will result. Ref. No.. To assure
Spindle Components. Pipe Threading Machine Ridge Tool Company/Elyria, Ohio, U.S.A. 123
Pipe Threading Machine 0 Spindle Components 0 Centering Jaw Set 0 Centering Head Centering Scroll 00 Roll Pin /" x /" () Retaining Ring 0 Rear Spindle Bearing 0 Front Spindle Bearing Drive Shaft Spacer
Fein The Metal Industry Specialists
www.fein.com.au ENDS MAY 31 2017 Fein The Metal Industry Specialists SEE INSIDE FOR SPECIAL OFFERS MAGDRILL RANGE DUST EXTRACTION ANGLE GRINDERS COLD CUT SAW 3 8 4-5 3 FEIN: THE LEADERS IN CORE DRILLING
Main Drive Components
Pipe and Bolt Threading Machine Main Drive Components 0 0 0 0 Centering Head Centering Jaw Set Centering Scroll 00 Roll Pin () Internal Spiral Ring Spindle Bearing () Plug /" Plug /" () 0 Ball Valve Oiler
PIPE CUTTERS. Service (Std) WT Soil Pipe XH Soil Pipe No-Hub Tile / Clay Weight
PIPE CUTTERS 590 AND 591 MANUAL PIPE CUTTER Service (Std) WT Soil Pipe XH Soil Pipe No-Hub Tile / Clay Weight 590-6 1 1 / 2 " 6" (38mm 150mm) 1 1 / 2 " 5" (38mm 125mm) 1 1 / 2 " 6" (38mm 150mm) 4" 6" (100mm
Roll Grooving ROLL GROOVING. Pipe Capacity. No. of Models. Type. Page
Roll Grooving Designed to improve speed and efficiency for fire sprinkler and other industrial installations. Wide selection of mechanical and hydraulic units for applications up to 24" in diameter. Type
TABLE OF CONTENTS BENDING SAWING HOLEMAKING
TABLE OF CONTENTS BENDING Offset Benders...1-2 Mechanical Benders...3-4 Combination Mechanical Bender...5 Bending Work Station...6-7 77 Series Electric Bender with Single Shoe Groups...8-9 77 Series Electric
Tube Installation.
Tube Installation www.elliott-tool.com Tube Installation Table of Contents Page Tube Installation 2 Tube Hole Gauges 4 Tube Sheet Hole Brushes 5 Grooving (Serrating) Tools 6 Tube Auger / End Prep 7 Hand
1/2 Air Impact Wrench P/N IR 2235TiMAX-2 With 2 Anvil, Weighs Only 4.9 lbs ft.-lbs. torque. 3/4 Super Duty P/N IR 261
37 Order NLINE www.midwestwheel.com CATALOG NUMBER Ingersoll Rand Air Tools & Accessories 3/8 Air Impactool IR 2115TiMAX The best power-to-weight ratio in its class 300 ft.-lbs. torque Enhanced power settings
Table of Contents. Table of Contents. Metalworking Lubricants. Specialty Tools. Metalworking Lubricants. Edge Breakers.
Table of Contents Specialty Tools Edge Breakers Accessories 463 Basic Oil Refractometer 469 Carbide Edge Breakers Flat Belt Oil Skimmer 469 Engraving Tools Economy Mixer 470 464 Carbide Standard Point
LUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading.
hand grease guns Lever type The tough high pressure cast iron head makes Pro-Master Grease Guns unique in comparison to common pot metal or other die cast heads with a head burst pressure of 17,000 PSI
Fein The Metal Industry Specialists
www.fein.com.au ENDS MAY 31 2017 Fein The Metal Industry Specialists SEE INSIDE FOR SPECIAL OFFERS MAGDRILL RANGE DUST EXTRACTION ANGLE GRINDERS COLD CUT SAW 3 8 4-5 3 FEIN: THE LEADERS IN CORE DRILLING
SPECIAL OFFER SPRING Valid to Industrial. People. Passion. Performance. Tools
SPECIAL OFFER SPRING 2014 Valid to 20140630 Industrial Tools People. Passion. Performance. CP8252-R 2300:- 2500:- 13000:- 25000:- 38000:- 1/2 impact wrench Twin hammer clutch Composite body and aluminum
NEW PRODUCTS GUIDE EDITION Oil Filter Remover Set 21 Piece. Oil Filter Remover Set Truck 6 Piece
EDITION 1. 2015 NEW PRODUCTS GUIDE 305900 Oil Filter Remover Set 21 Piece Professional 21 piece set supplied in blow mould storage case Manufactured from premium aluminium material to provide a long service
12-Ton Crimper. High-Torque Impact Wrenches. Gear-Driven Cable Cutters. 7-Ton Combination Cable Cutter/Crimpers
K 12-Ton Crimper BAT20-12T1651 Crimper, C-Style Head (includes case, batteries & charger) BAT20-12T165 Crimper, C-style head (includes a case) MCM MCM MCM W O P S C N V A I L M D FO High-Torque Impact
Contents. 13.Ridgid Cutter Wheels
JANUARY 2013 have combined low prices with a personalised high level of service. Demonstrations of our equipment may be arranged depending upon location. will support companies who meaningfully stock our
Hand Tool. Parts Catalog. June Ridge Tool Company, 400 Clark St., Elyria, Ohio U.S.A.
Hand Tool Parts Catalog June 00 Ridge Tool Company, 00 Clark St., Elyria, Ohio 0-00 U.S.A. Model Number Index Model No. Page 00-R... 00-RB...... -A...0...,, -A...0 -P... -S...... -S...... -S..., -P......
Main Components Early Style
Main Components Early Style * * 0 0 0 0 0 Service Notes: Ref. No.. Do not substitute bolt longer than / inches. Severe damage to Rear Bearing will result. Ref. No.. To assure proper oil flow, position
Sanders, Buffers & Polishers Introduction
Sanders, Buffers & Polishers Introduction Dotco sanders, buffers and polishers are available in a variety of styles and power ratings to provide flexibility in choosing the best tool for the job. Disc
Main Drive Components
Pipe and Bolt Threading Machine Main Drive Components 0 0 0 Rear Centering Head Centering Jaw Set Spiral Pins () 00 Centering Scroll Retaining Ring 0 Rear Bearing 0 Oil Ball Valve () #0 - x /" Screw Motor
frame, spindle case dated: 01/17
frame, spindle case dated: 01/17 1 Powered by TCPDF (www.tcpdf.org) frame, spindle case dated: 01/17 Item no. Description Article no. Quantity 1 Caution sticker RO 87080 1 2 Caution plate RO 87081 1 3
PIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
PROFESSIONAL BODY SHOP DENT PULLING WELDING SYSTEMS TOOLS
PROFESSIONAL BODY SHOP DENT PULLING WELDING SYSTEMS TOOLS 2018 PRODUCT GUIDE Dent Pulling Solutions for Steel & Aluminum Dual-Spotter Solutions for Steel & Aluminum Panels UNI-9700 DELUXE Aluminum & Steel
Cutting, Drilling and Beveling
Pipe Hole Cutter JK150 The Hongli Model JK150 pipe hole cutter is designed to cut holes up to 152mm into steel pipe. The multiple hole sizes allow the use of Mechanical fittings for branching unpressurized
Pipe End Preparation Machines EP 424. Machines perfect preps from OD DN (4" - 24"). Hydraulic, Electric or Pneumatic drive options.
Machines perfect preps from OD DN 100-600 (4" - 24"). EP 424 application. Auto feed angle generator by "SpeedPrep". Hydraulic, Electric or Pneumatic drive options. Compact flange facer. 33 Pipe End Preparation
SOLURA BLUE DEF DISPENSING SOLUTIONS. SOLURAbLUE
SOLURA BLUE DEF DISPENSING SOLUTIONS SOLURAbLUE LOOK TO THE WORLD WIDE LEADER FOR ALL YOUR LUBRICATION AND FLUID HANDLING NEEDS LUBRICATION EQUIPMENT FOR Cars Trucks Buses Planes Rails Industry Mining
Tools for Steel Pipe Installation
74 Tools for Steel Pipe Installation Bending Machines Hand Ratchet Threaders Portable Power Threader Accessories for Hand Ratchet and Portable Threaders Cutting Fluid Portable Threaders Die Heads and Dies
AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER
AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL KW0800256 3/8 Chuck, Reverse Equipped with precision chucks for excellent accuracy Precision bearing provides longer tool durability KW0800258
RecoverXLT Refrigerant Recovery Machine
RecoverXLT Refrigerant Recovery Machine Liquid and Vapor Recovery Set Up Liquid recovery is the fastest method, but not all equipment can handle the process Vapor recovery is slower than liquid recovery,
Specialists in Lubrication Products since 1912
Specialists in Lubrication Products since 1912 2018 Catalog August 2018 PO Box 6627, Elgin, IL 60121 Phone (847) 931-1020 Fax (847) 931-0944 Email: sales@lubeq.com www.lubeq.com INDEX Page Number Grease
Model. Reach into areas as small as 3/8". Model. Max. Air Flow SCFM (L/Min)
The Dynafile Original The Best Tracking Abrasive Belt Tool in the World! 14000 For 24" Long Belts World-famous Dynafile replaces tedious hand filing and sanding. Grind, deburr, blend, polish, finish and
Distributor Announcement
Date: 1/12/18 USA/INT L New Battery-Operated Tools Cutters, Crimpers and Impact Wrench Klein Tools brings over 160 years of quality, durability and expertise in hand tools to battery-operated tools. This
Innovative manufacturer of machines and tools for pipe working Catalogue
www.rems.de Innovative manufacturer of machines and tools for pipe working 2014 Catalogue Contents Threading Roll Grooving 22 Sawing 54 Cutting, Chamfering, Deburring 68 Assembling, Testing, Filling,
HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
Cut Off and Deburring
Cut Off and Deburring Cut Off and Deburring Heavy Duty Pipe Cutters Heavy-Duty Pipe Cutters RIDGID Heavy-Duty Pipe Cutters for fast, burr-free cutting of steel pipes up to. Extra-long shank protects adjustment
Tools. Acid Brush. Utility Brush. Brushes For Cleaning Copper Fittings G113 01/06/18
Acid Brush G113 Manufactured with electrolyte tin plate and filled with 100% pure stiff black horse hair which is firmly crimped to eliminate bristle "fall out" Use with acid, flux and pipe dope 1/2" Acid
8 to 10 threads chamfered for easy thread starting in tough material.
TAPER 8 to 10 threads chamfered for easy thread starting in tough material. NC = National Course NF = National Fine PLUG BOTTOM 3 to 5 threads chamfered for general use when tapping to bottom of hole is
Light, Portable, and Powerful - Designed to get the job done FAST!
FF5000 FF5000 PORTABLE PORTABLE FLANGE KEY MILL FACER F E A T U R E S S E T U P & O P E R A T I O N C O M P O N E N T S & A C C E S S O R I E S T E C H N I C A L D A T A Light, Portable, and Powerful -
Special Applications Require Special Tools
Index Routers.................. 102-103 Tappers..................... 104 Clinch Nut Tools.............. 106 Rivet Shavers................ 107 Skin Clamp Runners........... 108 Saws................... 109-110
THE NEW JET METALFORMING LINE UP STAND BEHIND YOUR WORK 550+ SERVICE CENTERS NATIONWIDE INDUSTRY-LEADING WARRANTIES EXPERT TECHNICAL SERVICE
THE NEW JET METALFORMING LINE UP STAND BEHIND YOUR WORK 550+ SERVICE CENTERS NATIONWIDE INDUSTRY-LEADING WARRANTIES EXPERT TECHNICAL SERVICE SAWING NEW 14" x 60" ELECTRIC PLATE ROLLER Three-roll design
P7RF Series Two-Stage, Single Phase Packaged Air Conditioner
TECHNICAL SPECIFICATIONS P7RF Series Two-Stage, Single Phase Packaged Air Conditioner 16 SEER, 12 EER 2 thru 5 Ton Units Cooling: 24,000 to 57,500 Btuh The P7 Series single packaged air conditioners are
KRAVITCH KEYHOLE TOOLS MODULAR PIKE TOOLING SYSTEM (PATENTED)
KRAVITCH KEYHOLE TOOLS MODULAR PIKE TOOLING SYSTEM (PATENTED) O P E R A T O R S HOW THE PIKE SYSTEM P I K E WORKS A D A P T E R S COMPLETELY MODULAR TRULY QUICK- DISCONNECT MODULAR SYSTEM CAN BE ADAPTED
Hitachi Circular Saw. Models. 165 mm (6-1/2 ) C 6SS 190 mm (7-1/2 ) C 7SS. LIST No. C 6SS: E519 C 7SS: E520 Jun PRODUCT NAME MARKETING OBJECTIVE
LIST No. C 6SS: E519 C 7SS: E520 Jun. 2009 PRODUCT NAME Hitachi Circular Saw Models 165 mm (6-1/2 ) C 6SS 190 mm (7-1/2 ) C 7SS C MARKETING OBJECTIVE Although our C 6MFA/C 7MFA Circular Saws now available
PIPE NIPPLES. Welded Pipe Nipples - Black & Galvanized. q Approved q Approved as noted q Not approved. Standard Schedule 40, XH Schedule 80
Welded Nipples - Black & Galvanized Standard Schedule 40, XH Schedule 80 q FIG. 9: Standard Black Schedule 40 q FIG. 8: Extra Heavy Black Schedule 80 q FIG. 4: Standard Galv. Schedule 40 q FIG. 42: Extra
Main Drive Components
Pipe and Bolt Threading Machine Main Drive Components 0 0 0 0 0 0 0 0 0 Pump Bracket Screw () Washer (0) Screw Centering Jaw Set Centering Head Back Plate Top Cover Die Head Decal (Not Shown) 00 Screw
Lubrication Tools and Accessories
Lubrication Tools and Accessories - 321 - Oil Filter Wrenches T70301 Reversible 3-Jaw Oil Filter Wrench Easily removes spin-on type oil filters in confined spaces Serrated legs wrap around oil filter Capacity:
ROBBINS 34RH C. Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter.
ROBBINS 34RH C Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter. RAISING THE BAR IN VERSATILITY THE ROBBINS 34RH C IS A LOW-PROFILE, LIGHTWEIGHT RAISE DRILL RIG
Taps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
RAZOR. RAZOR HVLP Spray Guns
RAZOR RAZOR HVLP Spray Guns Provides generous material flow that helps you get the job done quickly Offers exceptional atomization rate Promotes a superior finish Proven effective for clear coat, base
Innovative manufacturer of machines and tools for pipe working Catalogue
Innovative manufacturer of machines and tools for pipe working 2008 Catalogue Contents Threading 22 Roll Grooving 48 Sawing 52 Cutting, Chamfering, Deburring, Assembling 66 Bending 82 Radial Press Jointing
Wheeler Mfg. Div Rex Intl USA Inc Jefferson Road Ashtabula, OH Tel: Fax:
Wheeler Mfg. Div Rex Intl USA Inc. 3744 Jefferson Road Ashtabula, OH 44004 Tel: 800-321-7950 Fax: 440-992-2925 wheeler@wheelerrex.com www.wheelerrex.com Some Operating Hints...... 2 The 68115 features
Clamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
JET FORMING. Brakes Shears Rolls Rotary and Hand Notcher Machines Presses
Brakes....................................... 111 Shears....................................... 114 Rolls........................................ 115 Rotary and Hand Notcher Machines.............. 117
NOTE: Order parts by Catalog Number only. DO NOT order by Reference Number.
Integral Roll Groover -I Base Assembly 0 0 0 0 Motor Shroud Hydraulic Hose Assembly V, 0V Hydraulic Hose Assembly 00V Hydraulic Pump Complete 000 Hex Screw, /" - 0 x /" () 0 Lock Washer /" () 00 Screws
Unit: (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI.
Trade: Fitter Unit: 1+1+1 (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI. S.NO FITTER TOOL KIT QTY Rate/Item Amount 1 Rule
VISUAL INDEX Equipment
U R Hand Tube Benders Ratchet Hand Tube Bender 1 Hand Tube Bender BAV06/12 Combined Tube Bending & Cutting Tool BV06/18, BV20/25 Tube Bending Tools Benders R4-R5 R4 R5 R6 R6 Bender Capacity Guides Exactol
Pistol Grease Guns. AC475 comes complete with 4" steel extension and 4-jaw coupler with ball check AC476 comes complete with 18" flexible
Lubricating Mini Pistol Grease Guns Deluxe Single-hand-operated pistol grip Die cast grease gun head with dual discharge ports for use with steel extension as well as flexible hose Develops 3500 PSI Capacity:
SIOUX TOOLS INDUSTRIAL CATALOG DRILLS DRILLS. Index Drills Drill Accessories... 19
SIOUX TOOLS INDUSTRIAL CATALOG DRILLS DRILLS Index Drills.... 12 18 Drill Accessories.... 19 9 10 DRILLS SIOUX TOOLS INDUSTRIAL CATALOG DRILLS Performance, Serviceability, Ergonomics and Value 1 3 Light
SLUGGER CUTTERS Airforce 35. Airforce 45
Airforce 35 A compact pneumatic drill ideally suited to space restricted and hazardous environments such as oil drilling platforms, mining industry, shipbuilding or petrochemical industry. Combining a
Pressure Instrument Testing Equipment
Pressure Instrument Testing Equipment BULLETIN TE-1 A Halliburton Company A Durable, Portable Primary Standard Model 1305D Deadweight Tester The Ashcroft 1305D Deadweight Tester is an affordable, portable
Demolition Range. Rotary cutters for Carriers from 2.5 to 50 tons CUT. Worldwide Expert in Hydraulic Equipment MPR HSS GSB RSB RPU FPU HGR
Worldwide Expert in Hydraulic Equipment Demolition Range MPR HSS GSB RSB RPU FPU HGR CUT Rotary cutters for Carriers from 2.5 to 50 tons The perfect tool when excavation systems are weak and percussion
Standard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches
8 Punching Tools, Hole Saws, Step Bits Page Punching Tools Standard Knockout Punches 10 Slug Buster Knockout Punches 10 Slug Splitter Knockout Punches 10, 12 Punch Kits for Hydraulic Drivers 11 Draw Stud
Geared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
TOOL SETS. Handsaws 1
TOOL SETS Handsaws 1 2 Concrete saw & mitre saws + boxes INDEX Combination tool sets SOCKET SETS KRT951003 KRT951000 KRT951004 KRT951005 KRT500112 KRT500113 KRT500114 KRT951006 KRT951001 KRT951002 KRT951007
Innovative manufacturer of machines and tools for pipe working Catalogue
www.rems.de Innovative manufacturer of machines and tools for pipe working 2015 Catalogue Contents Threading oll Grooving 22 Sawing 54 Cutting, Chamfering, Deburring 68 Assembling, Testing, Filling, Flushing
Aqua Flo Point-of-Use Filtration Products. 76 Ultraviolet Disinfection Systems
Aqua Flo Point-of-Use 76 Ultraviolet Disinfection Systems Aqua Flo Point-of -Use Water Filters WaterGroup offers a wide range of point-of-use filtration solutions. Aqua Flo Economy - A full line of quality
WILTON SAWING. Horizontal Bandsaw s Vertical Bandsaws Cold Saws Cold Saw Blades Accessories... 32
Horizontal Bandsaw s........................... 18 Vertical Bandsaws.............................. 24 Cold Saws.................................... 27 Cold Saw Blades............................... 31
AUTOMOTIVE TOOLS & EQUIPMENT
AUTOMOTIVE TOOLS & EQUIPMENT Distributed By: TRADE-LOGIX PO BOX 1450 WATERDOWN, ON LOR 2HO www.trade-logix.com Email: sales@trade-logix.com Tel: (905) 581-2292 TABLE OF CONTENTS CREEPERS & SEATS Page 2
3/8-Inch Torque Wrench Square Drive, Torque Range Of 30 to 250 Inch Pound (3.39 to NM)
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 57005 3/8" Torque Wrench Square Drive Klein Tools Catalog Number 57005 Manufacturer Klein Tools 3/8-Inch Torque Wrench
Hydraulic Crimp Tooling
Hydraulic Crimp Tooling Fast Facts Standard 10,000 psi [68,950 kpa] rated hydraulic pumps and heads Interchangeable TE-design U-dies for crimp force up to 14 tons [125 kn] U-die stroke options of 1 in
Fittings & Accessories
Fittings & Accessories 176 AKRON BRASS COMPANY PH. 800.228.1161 (330.264.5678) FAX 800.531.7335 (330.264.2944) www.akronbrass.com 630 Angle Elbow SWIVEL FEMALE x MALE 2 1 2" & 3" sizes in 30 (64 & 76 mm)
Air Compressor Pumps. Best Pump Warranty In The Industry. Single Stage Cast Iron Compressor. Two Stage Cast Iron. Compressor C B
106 South Lake Court, Lexington, SC 29073 Tel: 803-356-4777 Fax: 803-356-4737 Air Compressor Pumps Best Pump Warranty In The Industry The Mi-T-M Pump Exchange Program provides pump replacement for the
The MATHEY Pneumatic or Hydraulic Powered CGM-1
CGM-1 COLD CUTTING & BEVELING MACHINE in Pneumatic and Hydraulic versions Approved CGM-1 A Pneumatic Driven Part No.: 05.5500.559 CGM-1 O Hydraulic Driven Part No.: 05.5500.560 The CGM Cold Cutting and
O.D. 230V 700W Series motor 1/4-2" 230V 700W Series motor 1/4-2" 230V 700W Series motor 1/4-3" 230V 750W Condenser motor 1/4-4"
Image Series O.D. Make 2" Pg. 4 NP50AV 1/4-2" 230V 700W Series motor 46kg 39 rpm 2" Pg. 6 NR50AV 1/4-2" 230V 700W Series motor 46kg 39 rpm 3" Pg. 8 NP80AV 1/4-3" 230V 700W Series motor 67kg 33 rpm 4" Pg.
ELECTRIC POWER TOOLS SIM180
New Products ELECTRIC POWER TOOLS SIM180 7 Polisher SIM115 4 1 / 2 Angle Grinder Voltage - 230v Frequency - 50hz Rated Power - 1300w Electronic Speed Control Maintains Constant Speed Under Load Soft Start,
Dynabrade Portable Abrasive Belt Tools
Dynabrade Portable Abrasive Belt Tools Grind, Deburr, Blend, Clean, Polish and Finish Reorder No. D08.02R We offer a diverse line of products to help you get the job done. With expert knowledge, service
Robbins 34RH. Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter
Robbins 34RH Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter 1 Raising the bar in versatility The Robbins 34RH is a low profile, lightweight raise drill rig for holes of
For securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]
![For securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]](/thumbs/86/93209358.jpg "For securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]")
Page 1 of 15 Wire terminal grips u All dimensions shown as IN [MM] For securing wire terminals, cables, connectors, and other samples for pull testing. ØA B C D G1001 0-0.125 [0-3.1] G1001-1 [1000] 0.29
Geared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
AIR OPERATED OIL PUMPS AND KITS
PM 2 AIR OPERATED OIL PUMPS AND KITS PM 2 Oil pump, pressure ratio : 0 Double acting air operated pumps for transferring lubricants and other non-corrosive fluids. Pump includes bung adapter. New Model
MICHIGAN PNEUMATIC TOOL
MICHIGAN PNEUMATIC TOOL Industrial Air Tools Grinders 2016 Serving All Industries Petro Chemical Aircraft Assembly Foundry Rental 1-800-521-8104 www.michiganpneumatic.com MATERIAL REMOVAL Right Angle Grinders
- the choice of. professionals...
- the choice of professionals... ONE powersource gives multiple choice... HYDRAULIC SYSTEMS POWE RED BY HYCON HEAVY DUTY BREAKERS 2 - in high quality tools for professionals! LIGHT DUTY BREAKERS RING SAW
Industrial Products, Inc. Custom Lift Tables 2015/2016 CONDENSED CATALOG AMERICAN MADE PRODUCTS SINCE 1948 CD2007/08
CD2007/08 Industrial Products, Inc. Custom Lift Tables 2015/2016 CONDENSED CATALOG DRUM EQUIPMENT HAND TRUCKS LIFT EQUIPMENT PLATFORM TRUCKS & CARTS RELATED PRODUCTS AMERICAN MADE PRODUCTS SINCE 1948 Industrial
List Ideal for Steels, Exotics and Difficult to Machine Materials. Type 5 (Lc=1 Thread) Type 6 (Lc=3 Threads) Miniature, Helical Flute
List 41200 Miniature, Helical Flute P450 Size Threads Cutter Dia. Overall Neck Shank Dia. No. of Per Inch D L Lc L1 d 0 80 0.045 1.625 0.013 0.165 1/8 3 5 4120000115 1 72 0.055 1.625 0.016 0.198 1/8 3
2 0 1 7 D E F E Q U I P M E N T C ATA L O G 608-487-9770 www.hartlandlubes.com TD1 Features & Benefits: Great performance and quiet operation Self priming Stainless steel motor shaft Polypropylene housing