Custom Air Handling Unit

Size: px

Start display at page:

Download "Custom Air Handling Unit"

Annabelle Nicholson
5 years ago
Views:

1 Job Information Technical Data Sheet Job Name Tomlson Date February Submitted By JGK Software Version Unit Tag AHU-1 Unit Overview Model Number cfm External Wc Static Pressure Total Wc Supply Height External Dimensions Width CAH045GDGM * 106* 208 *Not cludg base rails, coil connectors, dra connectors and control boxes. Unit Model Number: CAH045GDGM Approval: ETL Listed / ETL Listed to Canadian Safety Standards (ETL Label / ETLc Label) Outer Panel: Standard G90 Galvanized Steel (unpated) Ler: Galvanized Steel (unless noted per section) Insulation: R-13 Injected Foam Sound Baffles: Included Fan, Plenum, Access and Manual section (unless noted per section) Unit Configuration: Inle horizontal Drive (Handlg) Location: Left Base: 6" formed channel Wall Thickness: 2 Shrk Wrappg: Yes Altitude: 0 ft Parts Warranty: Standard One Year Mixg Box Component: 1 : 40 Shippg Section: 1 Portion Damper Size (length x width) Location Overall Openg Outside Air 36 x x 92 End Return Air 36 x x 92 Top Type UltraSeal Low Leak UltraSeal Low Leak Rated CFM Air Pressure Quantity cfm 0.07 swg cfm 1 Location Width Openg Drive side 30 Outward Special Options Special Text Predefed Special: Optional dampers. Rusk CD60 galv, parallel. Page 1 of 4

2 Combation Filter Component: 2 : 14 Shippg Section: 1 Access Face Velocity Face Area Side 439 ft/m 45.5 ft² cfm Portion Type Efficiency Air Pressure Number of Filters Clean Air Mean Air Dirty Air Height Width Depth Pre-Filter Pleated MERV Wc 0.60 Wc 1.00 Wc Filter Varicel II MH cartridge MERV Wc 1.04 Wc 1.50 Wc Location Width Openg Drive side 10 Outward Pre-Filter Gauge Mihelic Special Options Fal-Filter Gauge Mihelic Hot Water Coil Component: 3 : 36 Shippg Section: 1 Coil Model Total Capacity Number of Coils Number of Rows Fs per Inch Tube Diameter Tube Spacg (Face x Row) 5WS1202C Btu/hr x Air Temperature Enterg Leavg Dry Bulb Dry Bulb Coil Air Pressure Fned Height Fned Face Area Face Velocity cfm 40.0 F 85.9 F 0.33 Wc ft² 485 ft/m Enterg Fluid Leavg Flow Rate Pressure Velocity Volume Weight F F gpm 5.60 fthd 3.00 ft/s 13.0 gal lb Connection Type Quantity Size Location Material Threaded Drive side Carbon steel Material F Tube Header Case Glycol Type Propylene (50%) Alumum.0075 Copper.020 Copper Galvanized track AHRI 410 Certification Coil is NOT certified by AHRI M. F Surface Temp. M. Tube Wall Surface Temp. Foulg Factor F F Dra Pan Staless steel drip pan Location Width Openg Drive side 26 Outward Dra Side Drive side Page 2 of 4

3 Chilled Water Coil Component: 4 : 48 Shippg Section: 2 Coil Model Total Capacity Sensible Capacity Number of Coils Number of Rows Fs per Inch Tube Diameter Tube Spacg (Face x Row) 5WS1208B Btu/hr Btu/hr x Air Temperature Enterg Leavg Dry Bulb Wet Bulb Dry Bulb Wet Bulb Coil Air Pressure Fned Height Fned Face Area Face Velocity cfm 80.0 F 67.0 F 54.0 F 53.8 F 0.97 Wc ft² 469 ft/m Enterg Fluid Leavg Flow Rate Pressure Velocity Volume Weight 45.0 F 55.1 F gpm fthd 4.10 ft/s 44.0 gal lb Connection Type Quantity Size Location Material Threaded Drive side Carbon steel Material F Tube Header Case Glycol Type Propylene (30%) M. F Surface Temp. M. Tube Wall Surface Temp. Foulg Factor 45.0 F 45.0 F Dra Pan Dra Side Alumum.0075 Copper.020 Copper Galv. steel Staless steel Drive side AHRI 410 Certification Coil is NOT certified by AHRI Location Width Openg Drive side 26 Outward Supply Fan Component: 5 : 70 Shippg Section: 3 Static Pressure External Total Cabet Fan Performance Brake Horsepower Operatg Speed Maximum Outlet Velocity cfm 3.00 Wc 6.11 Wc 0.00 Wc BHP 1272 rpm 1465 rpm 0 ft/m Fan Data Fan Type Blade Type / Class Quantity of Fans Wheel Diameter Material Type Number of Blades Discharge Motor Location Centrifugal - Plenum Power Electrical Supply 30.0 HP 575/60/3 V/Hz/Phase Airfoil / Alumium 9 Top, sgle openg Motor Data Speed Efficiency Enclosure Frame Size Supplier Number of Poles Lock Rotor Current Behd Fan Full Load Current 1200 rpm Premium ODP 326 T frame Generic 6 0 A 29.1 A Fan Options Wheel Guard: Provided Seismic Restrat: With snubbers Inlet Screen: Provided Shaft Groundg Kit: Provided Isolator Type: Sprg VFD/Starter/Disconnect Data Selection Type: External J-Box Vendor: Factory Standard Voltage: 575 V Height x Width x Depth: 6.00 x 6.00 x 4.00 Mountg: Side Enclosure: NEMA 1 Location Width Openg Drive side 26 Outward Page 3 of 4

4 g Section Details n Unit Sound Power (db) Type 63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz Radiated: Unit Discharge: Unit Return: Weight Corner Weights (lb) Center of Gravity () lb P1 P2 P3 P4 XX YY ZZ nit ecial components aren't cluded the corner weights and center of gravity data. AHRI Certification Supply fan performance is certified accordance with the Central Station Air-Handlg Unit Certification Program, which is based on AHRI Standard 430. Notes Standard 1. As a standalone component, unit meets or exceeds requirements of ASHRAE The approvg authority is responsible for compliance of multi-component buildg systems. Page 4 of 4

5 STATIC PRESSURE (IN. OF WATER) Daik AHU Fan Curve rpm (55.0 Hz) 900 rpm (45.0 Hz) 700 rpm (35.0 Hz) bhp bhp2 bhp 1300 rpm (65.0 Hz) bhp 20.0 CFM (IN 1,000's) 5 bhp 1500 rpm (75.0 Hz) 7.5 bhp 10 bhp 15 bhp AF 36 DD PLENUM 9BL (100% Width) 1x1 Supply Fan at Standard Conditions Air volume cfm Fan speed 1272 rpm Total static 6.11 swg Max speed 1465 rpm Brake horsepower 28.6 bhp Efficiency 67.2 % Approx VFD Settg 63.6 Hz Motor Speed 1200 rpm 50 bhp 40 bhp 30 bhp 20 bhp 60 bhp 25 bhp Unit taggg AHU-1 Date February Job name Tomlson Time 13:02 Supply fan performance is certified accordance with the Central Station Air-Handlg Unit Certification Program, which is based on AHRI Standard 430.

Job Information Technical Data Sheet Job Name 21571221 - Tomlson Date February 06 2017 Submitted By JGK Software Version 11.

6 Job Information Technical Data Sheet Job Name Tomlson Date February Submitted By JGK Software Version Unit Tag AHU-2 Unit Overview Model Number cfm External Wc Static Pressure Total Wc Supply Height External Dimensions Width CAH040GDGM * 100* 196 *Not cludg base rails, coil connectors, dra connectors and control boxes. Unit Model Number: CAH040GDGM Approval: ETL Listed / ETL Listed to Canadian Safety Standards (ETL Label / ETLc Label) Outer Panel: Standard G90 Galvanized Steel (unpated) Ler: Galvanized Steel (unless noted per section) Insulation: R-13 Injected Foam Sound Baffles: Included Fan, Plenum, Access and Manual section (unless noted per section) Unit Configuration: Inle horizontal Drive (Handlg) Location: Right Base: 6" formed channel Wall Thickness: 2 Shrk Wrappg: Yes Altitude: 0 ft Parts Warranty: Standard One Year Mixg Box Component: 1 : 38 Shippg Section: 1 Portion Damper Size (length x width) Location Overall Openg Outside Air 34 x x 86 End Return Air 34 x x 86 Top Type UltraSeal Low Leak UltraSeal Low Leak Rated CFM Air Pressure Quantity cfm 0.07 swg cfm 1 Location Width Openg Drive side 30 Outward Special Options Special Text Predefed Special: Optional dampers. Rusk CD60 galv, parallel. Page 1 of 4

7 Combation Filter Component: 2 : 14 Shippg Section: 1 Access Face Velocity Face Area Side 560 ft/m 30.4 ft² cfm Portion Type Efficiency Air Pressure Number of Filters Clean Air Mean Air Dirty Air Height Width Depth Pre-Filter Pleated MERV Wc 0.63 Wc 1.00 Wc Filter Varicel II MH cartridge MERV Wc 1.16 Wc 1.50 Wc Location Width Openg Drive side 10 Outward Pre-Filter Gauge Mihelic Special Options Fal-Filter Gauge Mihelic Hot Water Coil Component: 3 : 36 Shippg Section: 1 Coil Model Total Capacity Number of Coils Number of Rows Fs per Inch Tube Diameter Tube Spacg (Face x Row) 5WH1102C Btu/hr x Air Temperature Enterg Leavg Dry Bulb Dry Bulb Coil Air Pressure Fned Height Fned Face Area Face Velocity cfm 40.0 F 89.2 F 0.32 Wc ft² 486 ft/m Enterg Fluid Leavg Flow Rate Pressure Velocity Volume Weight F F gpm fthd 5.60 ft/s 11.0 gal lb Connection Type Quantity Size Location Material Threaded Drive side Carbon steel Material F Tube Header Case Glycol Type Propylene (50%) Alumum.0075 Copper.020 Copper Galvanized track AHRI 410 Certification Coil is NOT certified by AHRI M. F Surface Temp. M. Tube Wall Surface Temp. Foulg Factor F F Dra Pan Staless steel drip pan Location Width Openg Drive side 26 Outward Dra Side Drive side Page 2 of 4

8 Chilled Water Coil Component: 4 : 48 Shippg Section: 2 Coil Model Total Capacity Sensible Capacity Number of Coils Number of Rows Fs per Inch Tube Diameter Tube Spacg (Face x Row) 5WM1212B Btu/hr Btu/hr x Air Temperature Enterg Leavg Dry Bulb Wet Bulb Dry Bulb Wet Bulb Coil Air Pressure Fned Height Fned Face Area Face Velocity cfm 80.0 F 67.0 F 54.4 F 54.2 F 1.45 Wc ft² 469 ft/m Enterg Fluid Leavg Flow Rate Pressure Velocity Volume Weight 45.0 F 54.9 F gpm 8.80 fthd 2.50 ft/s 56.0 gal lb Connection Type Quantity Size Location Material Threaded Drive side Carbon steel Material F Tube Header Case Glycol Type Propylene (30%) M. F Surface Temp. M. Tube Wall Surface Temp. Foulg Factor 45.0 F 45.0 F Dra Pan Dra Side Alumum.0075 Copper.020 Copper Galv. steel Staless steel Drive side AHRI 410 Certification Coil is NOT certified by AHRI Location Width Openg Drive side 20 Outward Supply Fan Component: 5 : 60 Shippg Section: 3 Static Pressure External Total Cabet Fan Performance Brake Horsepower Operatg Speed Maximum Outlet Velocity cfm 1.50 Wc 5.22 Wc 0.00 Wc BHP 1626 rpm 1783 rpm 0 ft/m Fan Data Fan Type Blade Type / Class Quantity of Fans Wheel Diameter Material Type Number of Blades Discharge Motor Location Centrifugal - Plenum Power Electrical Supply 30.0 HP 575/60/3 V/Hz/Phase Airfoil / Alumium 9 Top, sgle openg Motor Data Speed Efficiency Enclosure Frame Size Supplier Number of Poles Lock Rotor Current Behd Fan Full Load Current 1750 rpm Premium ODP 286 T frame Generic A 28 A Fan Options Wheel Guard: Provided Seismic Restrat: With snubbers Inlet Screen: Provided Shaft Groundg Kit: Provided Isolator Type: Sprg VFD/Starter/Disconnect Data Selection Type: External J-Box Vendor: Factory Standard Voltage: 575 V Height x Width x Depth: 6.00 x 6.00 x 4.00 Mountg: Side Enclosure: NEMA 1 Location Width Openg Drive side 26 Outward Page 3 of 4

9 g Section Details n Unit Sound Power (db) Type 63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz Radiated: Unit Discharge: Unit Return: Weight Corner Weights (lb) Center of Gravity () lb P1 P2 P3 P4 XX YY ZZ nit ecial components aren't cluded the corner weights and center of gravity data. AHRI Certification Supply fan performance is certified accordance with the Central Station Air-Handlg Unit Certification Program, which is based on AHRI Standard 430. Notes Standard 1. As a standalone component, unit meets or exceeds requirements of ASHRAE The approvg authority is responsible for compliance of multi-component buildg systems. Page 4 of 4

10 STATIC PRESSURE (IN. OF WATER) Daik AHU Fan Curve rpm (51.4 Hz) 1300 rpm (44.6 Hz) 1100 rpm (37.7 Hz) 900 rpm (30.9 Hz) 700 rpm (24.0 Hz) bhp bhp2 bhp 1700 rpm (58.3 Hz) 3 bhp 15.0 CFM (IN 1,000's) 5 bhp p 1900 rpm (65.1 Hz) 7.5 bhp 10 bhp 50 bhp 40 bhp 30 bhp 25 bhp 15 bhp AF 30 DD PLENUM 9BL (100% Width) 1x1 Supply Fan at Standard Conditions Air volume cfm Fan speed 1626 rpm Total static 5.22 swg Max speed 1783 rpm Brake horsepower 21.9 bhp Efficiency 63.7 % Approx VFD Settg 55.7 Hz Motor Speed 1750 rpm 20 bhp Unit taggg AHU-2 Date February Job name Tomlson Time 13:02 Supply fan performance is certified accordance with the Central Station Air-Handlg Unit Certification Program, which is based on AHRI Standard 430.

11 Job Information Technical Data Sheet Job Name Tomlson Date February Submitted By JGK Software Version Unit Tag AHU-3 Unit Overview Model Number cfm External Wc Static Pressure Total Wc Supply Height External Dimensions Width CAH049GDGM * 106* 206 *Not cludg base rails, coil connectors, dra connectors and control boxes. Unit Model Number: CAH049GDGM Approval: ETL Listed / ETL Listed to Canadian Safety Standards (ETL Label / ETLc Label) Outer Panel: Standard G90 Galvanized Steel (unpated) Ler: Galvanized Steel (unless noted per section) Insulation: R-13 Injected Foam Sound Baffles: Included Fan, Plenum, Access and Manual section (unless noted per section) Unit Configuration: Inle horizontal Drive (Handlg) Location: Right Base: 6" formed channel Wall Thickness: 2 Shrk Wrappg: Yes Altitude: 0 ft Parts Warranty: Standard One Year Mixg Box Component: 1 : 40 Shippg Section: 1 Portion Damper Size (length x width) Location Overall Openg Outside Air 36 x x 92 Top Return Air 36 x x 92 End Type UltraSeal Low Leak UltraSeal Low Leak Rated CFM Air Pressure Quantity cfm 0.10 swg cfm 1 Location Width Openg Drive side 30 Outward Special Options Special Text Predefed Special: Optional dampers. Rusk CD60 galv, parallel. Page 1 of 4

12 Combation Filter Component: 2 : 14 Shippg Section: 1 Access Face Velocity Face Area Side 516 ft/m 45.5 ft² cfm Portion Type Efficiency Air Pressure Number of Filters Clean Air Mean Air Dirty Air Height Width Depth Pre-Filter Pleated MERV Wc 0.62 Wc 1.00 Wc Filter Varicel II MH cartridge MERV Wc 1.12 Wc 1.50 Wc Location Width Openg Drive side 10 Outward Pre-Filter Gauge Mihelic Special Options Fal-Filter Gauge Mihelic Hot Water Coil Component: 3 : 36 Shippg Section: 1 Coil Model Total Capacity Number of Coils Number of Rows Fs per Inch Tube Diameter Tube Spacg (Face x Row) 5WS1202C Btu/hr x Air Temperature Enterg Leavg Dry Bulb Dry Bulb Coil Air Pressure Fned Height Fned Face Area Face Velocity cfm 40.0 F 85.5 F 0.38 Wc ft² 522 ft/m Enterg Fluid Leavg Flow Rate Pressure Velocity Volume Weight F F gpm 7.20 fthd 3.30 ft/s 14.0 gal lb Connection Type Quantity Size Location Material Threaded Drive side Carbon steel Material F Tube Header Case Glycol Type Propylene (50%) Alumum.0075 Copper.020 Copper Galvanized track AHRI 410 Certification Coil is NOT certified by AHRI M. F Surface Temp. M. Tube Wall Surface Temp. Foulg Factor F F Dra Pan Staless steel drip pan Location Width Openg Drive side 26 Outward Dra Side Drive side Page 2 of 4

13 Chilled Water Coil Component: 4 : 48 Shippg Section: 2 Coil Model Total Capacity Sensible Capacity Number of Coils Number of Rows Fs per Inch Tube Diameter Tube Spacg (Face x Row) 5WS1208B Btu/hr Btu/hr x Air Temperature Enterg Leavg Dry Bulb Wet Bulb Dry Bulb Wet Bulb Coil Air Pressure Fned Height Fned Face Area Face Velocity cfm 80.0 F 67.0 F 54.2 F 54.0 F 1.09 Wc ft² 505 ft/m Enterg Fluid Leavg Flow Rate Pressure Velocity Volume Weight 45.0 F 55.1 F gpm fthd 4.30 ft/s 48.0 gal lb Connection Type Quantity Size Location Material Threaded Drive side Carbon steel Material F Tube Header Case Glycol Type Propylene (30%) M. F Surface Temp. M. Tube Wall Surface Temp. Foulg Factor 45.0 F 45.0 F Dra Pan Dra Side Alumum.0075 Copper.020 Copper Galv. steel Staless steel Drive side AHRI 410 Certification Coil is NOT certified by AHRI Location Width Openg Drive side 26 Outward Supply Fan Component: 5 : 68 Shippg Section: 3 Static Pressure External Total Cabet Fan Performance Brake Horsepower Operatg Speed Maximum Outlet Velocity cfm 3.00 Wc 6.41 Wc 0.00 Wc BHP 1361 rpm 1465 rpm 0 ft/m Fan Data Fan Type Blade Type / Class Quantity of Fans Wheel Diameter Material Type Number of Blades Discharge Motor Location Centrifugal - Plenum Power Electrical Supply 40.0 HP 575/60/3 V/Hz/Phase Airfoil / Alumium 9 Top, sgle openg Motor Data Speed Efficiency Enclosure Frame Size Supplier Number of Poles Lock Rotor Current Behd Fan Full Load Current 1160 rpm Premium ODP 364 T frame Generic 6 0 A 41 A Fan Options Wheel Guard: Provided Seismic Restrat: With snubbers Inlet Screen: Provided Shaft Groundg Kit: Provided Isolator Type: Sprg VFD/Starter/Disconnect Data Selection Type: External J-Box Vendor: Factory Standard Voltage: 575 V Height x Width x Depth: 6.00 x 6.00 x 4.00 Mountg: Side Enclosure: NEMA 1 Location Width Openg Drive side 26 Outward Page 3 of 4

14 g Section Details n Unit Sound Power (db) Type 63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz Radiated: Unit Discharge: Unit Return: Weight Corner Weights (lb) Center of Gravity () lb P1 P2 P3 P4 XX YY ZZ nit ecial components aren't cluded the corner weights and center of gravity data. AHRI Certification Supply fan performance is certified accordance with the Central Station Air-Handlg Unit Certification Program, which is based on AHRI Standard 430. Notes Standard 1. As a standalone component, unit meets or exceeds requirements of ASHRAE The approvg authority is responsible for compliance of multi-component buildg systems. Page 4 of 4

15 STATIC PRESSURE (IN. OF WATER) Daik AHU Fan Curve rpm (56.9 Hz) 900 rpm (46.6 Hz) 700 rpm (36.2 Hz) bhp bhp2 bhp 1300 rpm (67.2 Hz) bhp 20.0 CFM (IN 1,000's) 5 bhp 1500 rpm (77.6 Hz) 7.5 bhp 10 bhp 15 bhp AF 36 DD PLENUM 9BL (100% Width) 1x1 Supply Fan at Standard Conditions Air volume cfm Fan speed 1361 rpm Total static 6.41 swg Max speed 1465 rpm Brake horsepower 35.6 bhp Efficiency 66.7 % Approx VFD Settg 70.4 Hz Motor Speed 1160 rpm 50 bhp 40 bhp 30 bhp 20 bhp 60 bhp 25 bhp Unit taggg AHU-3 Date February Job name Tomlson Time 13:02 Supply fan performance is certified accordance with the Central Station Air-Handlg Unit Certification Program, which is based on AHRI Standard 430.

SUBMITTAL DATA. for. MWSU-Popplewell Hall 1st Floor

SUBMITTAL DATA. for. MWSU-Popplewell Hall 1st Floor SUBMITTAL DATA for Prepared by Kevyn Gordon 4/27/2017 Job Name: 1 of 35 www.daikinapplied.com Table of Contents Technical Data Sheet for AHU-1st Floor... 3 Fan Curve for AHU-1st Floor... 7 Drawing for