MH6.6. Net flywheel power 129 kw hp Maximum operating weight kg Bucket capacity (SAE) m 3 PROVEN PERFORMANCE

Transcription

1 MH6.6 Net flywheel power 129 kw hp Maximum operating weight kg Bucket capacity (SAE) m 3 PROVEN PERFORMANCE

2 MH6.6WHEELED Latest technology Highest comfort Easy handling Outstanding performance HYDRAULIC SYSTEM SMART AND EFFICIENT The engine output of New Holland s mobile excavators can be utilised 100% at all times without overloading the engine. This is ensured by an intelligent electronic control and monitoring system with three hydraulic pumps. A separate swing pump gives maximum precision and productivity during work. Thanks to constant matching of stored data and actual values, the engine and pumps are always working at an optimal level. This system allows simultaneous movement of all functions. ATTACHMENTS ROBUST AND VERSATILE Reflecting the multiplicity of jobs to be tackled on a construction site, various booms and dippers are available. Max. performance is offered by the adjustable boom with advanced developed geometry. A generously dimensioned boom-adjusting cylinder delivers tremendous lifting power. What is more, the new boom boasts even greater reach and digging depth. Also, the attachment has high breakout forces. Thanks to electrohydraulic servo control, responsive and precise work movements have been optimised. A regenerative circuit permits energy-less lowering of the attachment and a higher lowering speed as well as reduced fuel consumption. DIESEL ENGINE EFFICIENT AND LONG-LASTING New Holland s mobile excavators are fitted with powerful 6-cylinder diesel engines with direct injection. Low idle speeds and a flat speed torque curve translate into low consumption and maximum reliability. An exhaust turbo charger and charge air cooler ensure improved combustion, yielding not only boosted performance, but also lower emissions levels. MAINTENANCE EASY ACCESS All components are readily accessible and can be serviced both from the platform and from the ground. Long-life lubrication of the components, e.g. of the fully encased ball bearing slewing ring, means long servicing intervals. UNDERCARRIAGE STRONG AND FLEXIBLE The new undercarriages are marked by a modular design for flexible adjustment to the customer s needs. The robust, torsion-free chassis uses standard parts and is robot-welded. The prop shaft offers good ground clearance and, in addition, is also available in a split version with intermediate bearing, which means even more off-road mobility and speeds of up to 30 km/h. Also, the PowerShift system flanged onto the rear axle ensures good ground clearance and excellent traction. 2

3 EXCAVATOR CAB COMFORTABLE AND ROOMY A spacious, noise-insulated, comfortable cab is a setting for healthy, fatigue-free work; the ergonomic seat can be height-adjusted to suit the operator, while the consoles can be moved along with the seat. Boarding and alighting are easier thanks to an adjustable steering column. All operating elements are arranged clutter-free and are easy to operate. A multi-function, menu-assisted display means quick setting of desired work modes. An efficient air-conditioning system in the cabin makes for an optimal climate even in the most inclement weather. With slide mechanisms in the upper and lower sections of the windscreen and a sliding window in the driver s door, the air supply can be adjusted individually to reflect weather conditions. MULTI-FUNCTION DISPLAY EASY TO USE The multi-function display controls and monitors all work sequences. Using simple menu assistance, 12 individually pre-set tools and output levels can be precisely defined and selected. Work areas and work sensitivity can be set, while the display diagnoses and displays any errors. Also, the hydraulic system is checked from the cab using an appropriate test device. 3

4 H6.6 Specifications ENGINE Net engine power (ISO 14396) kw/173 hp Make and model...cnh engine F4BE 0684A l Type...direct injection, turbocharged, intercooler, low emission, Tier 2 Engine speed rpm Number of cylinders...6 Bore/stroke x 120 mm Electronic setting of engine speed. Automatic speed re-setting. ELECTRICAL SYSTEM Operating voltage...24 V Capacity maintenance-free, batteries supplied standard Ah Alternateur...70 A Starter motor...4 kw HYDRAULIC SYSTEM Triple-pump hydraulics with two service pumps and separate swing pump. Single actuated pumps. Double flow. Fine-filtering of return oil, servo and swing circuit. Variable control. Hydraulic cooler with separate ventilator drive. Three variable displacement, axial piston pumps Implement/Travel - maximum delivery...2 x 200 l/min Swing - maximum delivery l/min Max pressure without Power Boost bar Max pressure with Power Boost bar Max swing pressure bar Hydraulic cylinder: - Lift cylinder...2 Bore x stroke (mono) x 1050 Bore x stroke (triple articulation) x Dipper cylinder...1 Bore x stroke x Bucket cylinder...1 Bore x stroke x Positioning cylinder (only triple articulation)...1 Bore x stroke x 745 TRANSMISSION Full PowerShift transmission with variable displacement hydraulic motor. Max. speeds 1st travel range 2nd travel range Slow km/h Medium km/h Fast km/h Max. tractive force kn SWING Position of swing pump and swing engine in closed circuit for loss-free swing-off and braking of the upperstructure. Swing drive with integrated, non-wearing disc brake. Encased ball bearing slewing ring with longlife lubrication. Effective swing torque (SAE J 1371)...60 knm Max. swing speed rpm CAB Spacious cab. Tinted safety glass. Very good view. Defroster nozzles for windscreen, variable blower, adjustable outlets for footwell and driver s seat. Raisable, split windscreen, also completely liftable. Sliding window in driver s door. Comfort seat. Consoles and seat individually adjustable. Adjustable steering. AXLES Axles with wet disc brakes acting directly on the hub. Oscillating front axles. Separate oil containers between axle shaft, drive (for rigid axle) and wheel head. BRAKE Service brake...oil bath disk brake Working brake...oil bath disk brake Parking brake...oil bath disk brake STEERING Hydraulic steering with emergency-steering properties System...ORBITROL Steering pump...gear pump TYRES 8 x M.ZR. F7.5, MITAS 8 x with baffle rings, Bridgestone 4 x 600/ Alliance Elastic solid rubber tyres with baffle rings CAPACITIES Fuel l Cooling system...29 l Engine oil...16 l Swing drive...4 l Hydraulic system l 4

5 H6.6 TWO-PIECE BOOM DIMENSIONS (mm) - OPERATING WEIGHTS B TRANSPORT DIMENSIONS DIPPERSTICK mm A Overall lenght of excavator mm B Height to top of boom mm ATTACHMENT/kg A DIPPERSTICK 2 stabilisers front or rear 4 stabilisers blade rear blade rear / 2 stabilisers 2.30 m m m H DIGGING PERFORMANCE A B C E D DIPPERSTICK mm A mm B mm H mm C mm D mm E mm F mm G mm Bucket breakout force (370 bar) dan Dipperstick breakout force (370 bar) dan G F 2440 mm E D 2,4 m F WORKING RANGES DIPPERSTICK mm A Max. reach mm B Max. reach at ground level mm C Max. depth mm D Max. height mm E Min. front swing radius mm F mm C B A 5

6 H6.6 mono BOOM DIMENSIONS (mm) - OPERATING WEIGHTS TRANSPORT DIMENSIONS B DIPPERSTICK mm A Overall lenght of excavator mm B Height to top of boom mm A ATTACHMENT/kg DIPPERSTICK 2 stabilisers front or rear 4 stabilisers blade rear blade rear / 2 stabilisers 2.30 m m m H DIGGING PERFORMANCE DIPPERSTICK mm A C B E D A mm B mm H mm C mm D mm E mm F mm G mm Bucket breakout force (370 bar) dan Dipperstick breakout force (370 bar) dan mm G F 2,4m E WORKING RANGE D F DIPPERSTICK mm A Max. reach mm B Max. reach at ground level mm C Max. depth mm D Max. height mm E Min. front swing radius mm F mm C B A 6

7 R = For tyres

8 H6.6 LiftING capacity BLADE - 2-PIECE BOOM Bucket (CECE): 0.70 m 3 VALUES ARE EXPRESSED IN TONNES REAR BLADE / UP 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.8* * * * REAR BLADE / DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.8* * * * * * * * * * * * * * * * * * * * * * * * * * * * REAR BLADE / UP REAR BLADE / DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.6* * * * * m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.6* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * REAR BLADE / UP 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* * * * * * * REAR BLADE / DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* * 2.8* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * As per ISO with excavator equipped with bucket. The indicated load is no more than 87% of hydraulic system lift capacity or 75% of static tipping load. Value marked with an asterisc are limited by the hydraulic system. 8

9 LiftING capacity TWO STABILISERS - 2-PIECE BOOM Bucket (CECE): 0.70 m 3 VALUES ARE EXPRESSED IN TONNES REAR STABILISERS / UP 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.8* * * * * REAR STABILISERS / DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.8* 3.8* * * * * * * * * * * * * * * * * * * * * * * * REAR STABILISERS / UP REAR STABILISERS / DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.6* * * * * * 8.5* m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.6* 3.6* 3.2* 3.2* * * * 6.0* 5.0* * * * * * * * * * * * * * * * * * * * * * REAR STABILISERS / UP 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* * * * * * * * * * REAR STABILISERS / DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* 3.9* 2.8* 2.8* * * * 2.5* * 5.5* 4.9* * * * 11.7* 7.2* * * * * * * * * * * * * * * * * * * As per ISO with excavator equipped with bucket. The indicated load is no more than 87% of hydraulic system lift capacity or 75% of static tipping load. Value marked with an asterisc are limited by the hydraulic system. 9

10 H6.6 LiftING capacity BLADE - TWO STABILISERS - 2-PIECE BOOM Bucket (CECE): 0.70 m 3 VALUES ARE EXPRESSED IN TONNES REAR BLADE / STABILISERS UP 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.8* * * * * REAR BLADE / STABILISERS DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.8* 3.8* * 5.1* 3.4* 3.4* * 6.5* 5.3* * * * 12.0* 8.1* * * * * 13.6* 10.1* * * * * * * * * * * * * * * * * * * * REAR BLADE / STABILISERS UP REAR BLADE / STABILISERS DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.6* * * * * * * m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.6* 3.6* 3.2* 3.2* * 4.8* 2.9* 2.9* * 6.0* 5.0* 5.0* 4.4* * 2.9* * 13.0* 7.6* 7.6* 5.9* * * * 13.7* 9.7* * * * * * * * * * * * * * * * * * * * * REAR BLADE / STABILISERS UP 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* * * * * * * * REAR BLADE / STABILISERS DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* 3.9* 2.8* 2.8* * 4.4* 3.1* 3.1* 2.5* 2.5* * 5.5* 4.9* 4.9* 4.4* * 2.5* * 11.7* 7.2* 7.2* 5.6* * * * 13.1* 9.2* * * * * 15.2* 10.7* * * * * * * * * * * * * * * * As per ISO with excavator equipped with bucket. The indicated load is no more than 87% of hydraulic system lift capacity or 75% of static tipping load. Value marked with an asterisc are limited by the hydraulic system. 10

11 LiftING capacity FOUR STABILISERS - 2-PIECE BOOM Bucket (CECE): 0.70 m 3 VALUES ARE EXPRESSED IN TONNES 4 STABILISERS UP 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.8* * * * * STABILISERS DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.8* 3.8* * 5.1* 3.4* 3.4* * 6.5* 5.3* 5.3* 4.4* * 3.2* * 12.0* 8.1* 8.1* 6.1* 6.1* 5.2* * 3.2* * 13.6* 10.1* * * * * 16.0* 11.2* * * * * 18.7* 11.4* * * * * 19.4* 11.9* * * * 16.4* 9.9* 9.9* STABILISERS UP 4 STABILISERS DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.6* * * * * * m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.6* 3.6* 3.2* 3.2* * 4.8* 2.9* 2.9* * 6.0* 5.0* 5.0* 4.4* * 2.9* * 13.0* 7.6* 7.6* 5.9* 5.9* 5.0* * 3.0* * 13.7* 9.7* * * * * 15.6* 11.1* * * * * 18.2* 11.3* * * * * 19.2* 11.6* * * * 17.9* 9.6* * STABILISERS UP 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* * * * * * * * * * STABILISERS DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* 3.9* 2.8* 2.8* * 4.4* 3.1* 3.1* 2.5* 2.5* * 5.5* 4.9* 4.9* 4.4* * 2.5* * 11.7* 7.2* 7.2* 5.6* 5.6* 4.7* * 2.6* * 13.1* 9.2* 9.2* 6.4* * * 2.8* * 15.2* 10.7* * * * * 17.6* 11.2* * * * 18.9* 11.4* * * * 19.0* 10.6* * As per ISO with excavator equipped with bucket. The indicated load is no more than 87% of hydraulic system lift capacity or 75% of static tipping load. Value marked with an asterisc are limited by the hydraulic system. 11

12 H6.6 LiftING capacity BLADE - MONO BOOM Mono boom: 5.60 m Bucket (CECE): 0.70 m 3 VALUES ARE EXPRESSED IN TONNES REAR BLADE / UP 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* * * * REAR BLADE / DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* * * * * * * * * * * * * * * * * * * * * * * REAR BLADE / UP REAR BLADE / DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* * * * * * * m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* * * * * * * * * * * * * * * * 6.1* 11.2* * * * * * * * * * REAR BLADE / UP 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 4.0* * * * * * * * REAR BLADE / DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 4.0* * * * * * * * * * * * * * * * * 6.3* 11.0* * * * * * * * * * * * As per ISO with excavator equipped with bucket. The indicated load is no more than 87% of hydraulic system lift capacity or 75% of static tipping load. Value marked with an asterisc are limited by the hydraulic system. 12

13 LiftING capacity TWO STABILISERS - MONO BOOM Mono boom: 5.60 m Bucket (CECE): 0.70 m 3 VALUES ARE EXPRESSED IN TONNES REAR STABILISERS / UP 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* * * * REAR STABILISERS / DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* 3.9* 3.6* 3.6* * * * * * * * * * * * * * * * * * REAR STABILISERS / UP REAR STABILISERS / DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* * * * * * * m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* 3.9* 3.1* 3.1* * * * * * * * * * * * * 6.1* 11.2* * * * * * * * REAR STABILISERS / UP 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 4.0* * * * * * * * REAR STABILISERS / DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 4.0* 4.0* 2.7* 2.7* * * * * * * * * * * * * * * 6.3* 11.0* * * * * * * * * * As per ISO with excavator equipped with bucket. The indicated load is no more than 87% of hydraulic system lift capacity or 75% of static tipping load. Value marked with an asterisc are limited by the hydraulic system. 13

14 H6.6 LiftING capacity BLADE - TWO STABILISERS - MONO BOOM Mono boom: 5.60 m Bucket (CECE): 0.70 m 3 VALUES ARE EXPRESSED IN TONNES REAR BLADE / STABILISERS UP 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* * * * REAR BLADE / STABILISERS DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* 3.9* 3.6* 3.6* * * 3.4* * 7.0* 5.8* * * * * * * * * * * * * * * 9.8* 10.9* * * * * 13.4* 9.6* * * * * REAR BLADE / STABILISERS UP REAR BLADE / STABILISERS DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* * * * * * * m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* 3.9* 3.1* 3.1* * 4.9* 2.9* 2.9* * 6.5* 5.5* * * * * * * * * * * * 6.1* 11.2* * * * 9.8* 11.0* * * * * * * * * 10.5* 7.5* * REAR BLADE / STABILISERS UP 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 4.0* * * * * * * * REAR BLADE / STABILISERS DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 4.0* 4.0* 2.7* 2.7* * 4.6* 3.3* 3.3* 2.5* 2.5* * * * 2.5* * 13.3* 8.0* * * * * * * * * 6.3* 11.0* * * * * 9.3* 11.0* * * * * * * * 11.5* 8.0* * * As per ISO with excavator equipped with bucket. The indicated load is no more than 87% of hydraulic system lift capacity or 75% of static tipping load. Value marked with an asterisc are limited by the hydraulic system. 14

15 LiftING capacity FOUR STABILISERS - MONO BOOM Mono boom: 5.60 m Bucket (CECE): 0.70 m 3 VALUES ARE EXPRESSED IN TONNES 4 STABILISERS UP 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* * * * STABILISERS DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* 3.9* 3.6* 3.6* * 5.3* 3.4* 3.4* * 7.0* 5.8* 5.8* 5.2* * 3.3* * 9.0* 6.7* * * * * * * * * * * 9.8* 10.9* * * * 13.4* 9.6* * * * 6.9* 5.4* 5.4* STABILISERS UP 4 STABILISERS DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* * * * * * * m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 3.9* 3.9* 3.1* 3.1* * 4.9* 2.9* 2.9* * 6.5* 5.5* 5.5* 5.0* * 2.9* * 8.5* 6.4* * * 3.1* * * * * * 6.1* 11.2* * * * 9.8* 11.0* * * * 14.2* 9.9* * * * 10.5* 7.5* 7.5* 5.6* 5.6* STABILISERS UP 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 4.0* * * * * * * * STABILISERS DOWN 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. Front Side Front Side Front Side Front Side Front Side 4.0* 4.0* 2.7* 2.7* * 4.6* 3.3* 3.3* 2.5* 2.5* * 5.2* 4.7* * 2.5* * 13.3* 8.0* 8.0* 6.1* * * 2.7* * * * * * 6.3* 11.0* * * * 9.3* 11.0* * * * 13.5* 10.1* * * * 11.5* 8.0* 8.0* 5.6* * As per ISO with excavator equipped with bucket. The indicated load is no more than 87% of hydraulic system lift capacity or 75% of static tipping load. Value marked with an asterisc are limited by the hydraulic system. 15

16 STANDARD EQUIPMENT Robust, shielded arc, welded modular chassis in box section design Patented disc brakes for jolt-free work Disc drive switchable under load Large toolbox under the step CNH diesel engine, 129 kw at 2000 rpm (ISO 14396) Direct injection with turbo charger and charge air cooling Water-cooled, low-consumption and low-exhaust pursuant to EU directive Tier 2 Automatic battery main switch (coupled to ignition lock) Electronic immobiliser Pump Management System Electrohydraulic servo control Triple-pump-hydraulic system with two service pumps and separate swing pump Engine and pump monitoring by power limit control OPTIONAL EQUIPMENT Tyres 8 x with baffle rings, Bridgestone, twin tyres 4 x XF Elastic solid rubber tyres with baffle rings Dozer blade with hydraulic parallel guidance Stabiliser for secure grip on uneven ground Transport holder for grabs Interim bearing for prop shaft Axles with self-locking differential Electric diesel filling system Central lubrication Cooling box Note: standard and optional equipment may vary by country. Consult your NEW HOLLAND dealer for specific details. SAE CAPACITY / m 3 WIDTH / mm WEIGHT / kg * Please contact your dealer for additional bucket offering BUCKETS 8 selectable power stages Automatic power increase in DRIVE stage Encased ball bearing slewing ring with long-life lubrication Swing drive with low-wearing disc brake Loss-free swing-off and braking of uppercarriage, adjustable Noise-insulated and flexibly mounted cabin in soft design Safety glazing tinted all around, insertable windscreen Sun blinds, roof window, transparent rain protection LCD with integrated error diagnosis function Steering column incline infinitely variable Ergonomic design of arm rests and foot pedals Driver seat individually adjustable in height and incline Consoles adjustable in height and length Electrical preparation 12 V Air-conditioning Auxiliary heating Front and roof guards Guard against stones on cab roof and front window, FOPS Armoured glass for front window Platforms 0.8 m and 1.3 m Dippersticks: 2.3 m and 2.9 m Safety load hook on coupler Safety system for hoist mode Hydraulic system for hammer, grab, shears 30 km/h overdrive AT YOUR OWN DEALERSHIP The information contained in this brochure is intended to be a general nature only. The NEW HOLLAND KOBELCO CONSTRUCTION MACHINERY S.p.A. company may at any time and from time to time, for technical or other necessary reasons, modify any of the details or specifications of the product described in this brochure. Illustrations do not necessarily show products in standard conditions. The dimensions, weights and capacities shown herein, as well as any conversion data used, are approximate only and are subject to variations within normal manufactoring tecniques. Published by NEW HOLLAND KOBELCO CONSTRUCTION MACHINERY S.p.A. - Printed in Italy - LEADER Firenze - Cod INB - Printed 02/05 NEW HOLLAND IS A BRAND OF CNH. CNH: THE TOTAL SOLUTIONS CHOICE FOR YOUR SPECIFIC BUSINESS NEEDS.