E805. Net flywheel power Operating weight (max.) 340 kw hp kg Bucket capacity m 3 PROVEN PERFORMANCE

Transcription

1 E Net flywheel power Operating weight (max.) kw - hp kg Bucket capacity. -. m PROVEN PERFORMANCE

2 Specifications TIER EMISSIONED ENGINE Net flywheel power (ISO )... kw/ hp Rated rpm... Make and model...isuzu WGTC Type...-stroke, Turbocharged, direct injection and intercooler Total displacement... l Number of cylinders... Bore and stroke... x mm Engine rpm electronic control, dial type. Auto-Idling selector returns engine to minimum rpm when all controls are in neutral position. - C outside temperature start as standard equipment. Standard electronic theft control. The engine conforms to //CE STAGE Standards. ELECTRICAL SYSTEM Voltage... V Alternator... A Starter motor... kw Standard maintenance-free batteries... Capacity... Ah HYDRAULIC SYSTEM New S.H.S. (Smart Hydraulic System) for perfect controllability and complete simultaneity of all movements. New generation A.I. (Artificial Intelligence) on-board computer A.P.S. (Automatic Priority System) device. Computerized pumps delivery and main control valve actuation in relation to manipulators stroke. E.S.S.C. (Engine Speed Sensing Control) device for total installed hydraulic power exploitation. High definition E.T.U. (Easy to Use) multi-function monitor Mechatronic Work Selector (M.W.S.): - Automatic Mode - Automatic adaption to work conditions - Standard Mode (S) - Standard operating mode - Heavy Mode (H) - Maximum hydraulic power for maximum productivity - Light Mode (L) - Finishing and precision works Power Boost device with automatic insertion Ultra Clean System...oil change every hours Main pumps: Two variable delivery pumps with electronic delivery adjustment. Pumps automatically revert to zero delivery with controls in neutral. Maximum delivery... x l/min Piloting circuit gear type pump Maximum delivery... l/min Maximum operating pressure... MPa TRANSMISSION Type...hydrostatic, two-speed Travel motors...axial pistons double displacement type Brakes...oil bath disc type, automatically applied and hydraulically released Final drive...oil bath, planetary reduction Gradeability (continuous)...% ( ) Travel speeds: low...from to. km/h high...from to. km/h Automatic DownShift device: to move travel motors to maximum displacement position with selector on high speed position when greater traction is required. SWING Swing motor...axial piston type Swing brake...oil bath disc type, automatically applied...and hydraulically released Final drive...oil bath, planetary reduction Swing ring...grease bath type Swing speed... rpm CAB AND CONTROLS TOPS (Tilt Over Protection Structure) standard cab. Transparent cab roof. Standard automatic conditioning. Controls...piloted Two cross path manipulators actuate all equipment movements and upperstructure swing. Two pedals with hand levers control all track movements, counter-rotation included. A safety lever completely neutralizes the piloting circuit. UNDERCARRIAGE X-frame undercarriage design, with variable gauge Reinforced track chain with sealed bushings. E Track rollers (each side) Carrier rollers (each side) Length of track on ground (mm) Gauge (mm) - Shoes (mm) CAPACITIES Engine litres Lube oil... Coolant... Fuel tank... Hydraulic system...

3 DIMENSIONS (mm) - OPERATING WEIGHT E G B A M F K J L I H D C MONOBLOC BOOM mm - DIPPERSTICK mm A) Overall height B) Cab height C) Overall length D) Overall length (without attachment) E) Width of upperstructure (with cat walks) F) Upperstructure ground clearance G) Swing (rear end) radius H) Track overall length I) Centre/centre (idler to sprocket) J) Track gauge (in work position) (in transport position) K) Track shoes width L) Track overall width Shoes mm (in work position) (in transport position) Shoes mm (in work position) (in transport position) M) Ground clearance Operating weight Weight Ground pressure (kg) (bar). MONOBLOC BOOM mm - DIPPERSTICK mm A) Overall height B) Cab height C) Overall length D) Overall length (without attachment) E) Width of upperstructure (with cat walks) F) Upperstructure ground clearance G) Swing (rear end) radius H) Track overall length I) Centre/centre (idler to sprocket) J) Track gauge in work position) (in transport position) K) Track shoes width L) Track overall width Shoes mm (in work position) (in transport position) Shoes mm (in work position) (in transport position) M) Ground clearence Operating weight Weight Ground pressure (kg) (bar).

4 DIGGING PERFORMANCE WITH MONOBLOC BOOM mm F G E C D H B A mm DIPPERSTICK mm A) Maximum digging reach mm B) Maximum digging reach at ground level mm C) Maximum digging depth mm D) maximum digging depth - levelled bottom mm mm E) Maximum dump height mm F) Maximum digging height mm G) Minimum equipment swing radius mm - - H) Vertical straight wall dig depth mm Breackout force - Dipperstick dan Breakout force - Bucket dan

5 Lifting capacity WITH MONOBLOC BOOM mm RADIUS OF LOAD. m. m. m. m AT MAX REACH FRONT SIDE FRONT SIDE FRONT SIDE FRONT SIDE DIPPERSTICK mm - BUCKET kg HEIGHT +. m +. m +. m -. m -. m FRONT SIDE REACH m * * * *. * * * * *. * * *. * *. * * *. * * * *. RADIUS OF LOAD. m. m. m. m AT MAX REACH DIPPERSTICK mm - BUCKET kg HEIGHT +. m +. m +. m -. m -. m FRONT SIDE FRONT SIDE FRONT SIDE FRONT SIDE FRONT SIDE REACH m * *. * * *. * * * * *. * * * *. * * *. * * * *. RADIUS OF LOAD. m. m. m. m AT MAX REACH FRONT SIDE FRONT SIDE FRONT SIDE FRONT SIDE DIPPERSTICK mm - BUCKET kg HEIGHT +. m +. m +. m -. m -. m FRONT SIDE REACH m * *. * * * * *. * * * * * * *. * * * * *. * * * * * *. * * * * * * *. As per ISO with excavator equipped with bucket. The indicated load is no more than % of hydraulic system lifting capacity or % of static tipping load. Value marked with an asterisc are limited by the hydraulic system.

6 DIGGING PERFORMANCE WITH MONOBLOC BOOM mm AND DIPPERSTICK mm mm mm mm mm mm mm mm mm Digging force... dan Breackout force... dan LIFTING CAPACITY WITH MONOBLOC BOOM mm RADIUS OF LOAD. m. m. m AT MAX REACH FRONT SIDE FRONT SIDE FRONT SIDE DIPPERSTICK mm - BUCKET kg HEIGHT +. m +. m -. m FRONT SIDE REACH m * * *. * * *. * * *. * * * *. As per ISO with excavator equipped with bucket. The indicated load is no more than % of hydraulic system lifting capacity or % of static tipping load. Value marked with an asterisc are limited by the hydraulic system.

7 Dimensions - Transport weights D A F E B C A B C each mm D mm E (per ) mm F mm Protections and others LENGTH WIDTH HEIGHT WEIGHT mm mm mm kg

8 PARTS & SERVICE The New Holland dealer network is, in itself, the best guarantee of continued productivity for the machines it delivers to its customers. New Holland service technicians are fully equipped to resolve all maintenance and repair issues, with each and every service point providing the high standards they are obliged to observe under New Hollands stringent quality guidelines. The New Holland global parts network ensures fast, reliable, replacement parts for less downtime, increased productivity and, of course, profitable operation for its customers. AT YOUR OWN DEALERSHIP The information contained in this brochure is intended to be a general nature only. The NEW HOLLAND KOBELCO CONSTRUCTION MACHINERY S.p.A. company may at any time and from time to time, for technical or other necessary reasons, modify any of the details or specifications of the product described in this brochure. Illustrations do not necessarily show products in standard conditions. The dimensions, weights and capacities shown herein, as well as any conversion data used, are approximate only and are subject to variations within normal manufactoring tecniques. Published by NEW HOLLAND KOBELCO CONSTRUCTION MACHINERY S.p.A. - Printed in Italy - LEADER Firenze - Cod. - INB - Printed / NEW HOLLAND IS A BRAND OF CNH. CNH: THE TOTAL SOLUTIONS CHOICE FOR YOUR SPECIFIC BUSINESS NEEDS.