WFX Series. Four-cornered shoulder mill for steel, stainless steel, and cast iron machining. High Performance Milling Systems. Stainless.
|
|
- Rosaline Young
- 5 years ago
- Views:
Transcription
1 High Performnce Milling ystems eries our-cornered shoulder mill for steel, stinless steel, nd cst iron mchining teel tinless teel Cst Iron
2 Grdes The type is the first series to offer the newly developed multilyer PVD coting structure on these grdes: ACP2, ACP3, nd ACK3. With excellent resistnce ginst wer, frcture, nd dhesion, the grdes chieve.5 times longer tool life thn conventionl coting. (2) Wer Resistnce Work mteril: 44 Tool: 2R (ø3.94" x flute test) Cutting Conditions v c = 656 M f z =.6 IPT e =.8" p =.969" (mm) lnk Wer pre Prts Comp A Brekge Brekge Comp B MX4R Cutting min Time (min) GP Coting Hrdness WveMill is screw-down type cutter cple of using 4-cornered inserts. Idel cutting edge design offers exceptionl squreness. Chrcteristics The insert shpe is optimized for shoulder milling; when comined with high-precision ody it leves superior mchined surfce finish. Mximum depth of cut (p) =.394" (.mm) With oil hole = ø5" or less (25 mm) 3 types of chiprekers Performnce () qureness uper ZX Cot ZX Cot TiCN TiN etures & Benefits NW uper ZX Cot TiAIN 6 8,,2 trting Temperture or Oxidiztion ( C) Totl houlder Height Work Inch mteril:49 Tool: 2R (ø3.94" x 5 flutes) (mm) 25 MX4R (3) urfce inish Work mteril: 44 Tool: 2R (ø3.94" x 5 flutes) Cutting Conditions v c =656 M f z =.4 IPT e =3.543" p =.8" CompA Devition -3 (μm) 2 (μm).5 R urfce Roughness.5 5 CompB Rμm Cutting Conditions v c = 656 M f z =.6 IPT e =.787" p =.35" x 3 times MX Comp. A Conventionl Tool Applicle Cutters Torque Wrench (insert) Wrench (set) BTX352IP 3.N * m TRDR5IP - Other types 4R BW57 BTX352IP 3.N * m TRDR5IP LH35 Coolnt Through Bolts Ctlog Numer Cutter ize BXH 3/8 x 2." BXH /2 x /4 2.5" BXH /2 x /4 3." BXH 5/8 x /4 4." BXH 3/4 x /2 5." Recommended Cutting Conditions IO P Work Mteril Generl teel oft teel Die teel M tinless teel K Cst Iron Rting G G Cutting peed v c (M/m/min) Min.-Optimum-Mx eed Rte f z (IPT/mm/t) Min.-Optimum-Mx D.O.C. (In/mm) Grdes <.394 ACP <. ACP <.394 ACP <. ACP <.236 ACP < 6. ACP <.394 ACP < <.394 ACK <. ACK3
3 ig ig 2 ig 3 Cutter Bodies - INCH Dimensions (inch) Ct. No. Pitch ig Teeth 42R R R R Corse 45R R R R R R R ine 45R R R X42R X425R uper X43R ine X44R X45R tock ig 4 ig 5 ig 6 ig 7 ig 8 PCD.6 4ø8 f f f f f 2 c ø7 2 c c c c Cutter Bodies - MTRIC (Corse Pitch) Ct. No. Weight c Lf 2 Teeth (kg) ig 25R R R R R R R R R R tock : Worldwide Wrehouse Item
4 ig 4 ig 5 ig 6 ig 7 ig 8 PCD.6 4ø8 Cutter Bodies - MTRIC (ine Pitch) Ct. No. Weight c Lf 2 Teeth (kg) ig 25R R R R R R R R R R tock : Worldwide Wrehouse Item s re not included. * Cutters ø6 mm or ove do not hve coolnt holes. Plese use JIB76 "hexgonl olt" (ø8: M2 3-35mm, ø: M6 4-45mm) for securing the ø8 or ø cutter to the ror. c s f f f f f 2 c ø7 2 c c c c f Body (hnk Type) Ct. No. c s Lf s L tock ø4 mm cutters do not hve set. Teeth Body (hnk, ine Pitched Type) Ct. No. c s Lf s L tock : Worldwide Wrehouse Item Teeth s Ct. No. ACP ACP2 Coted Cride Cride Cermet ACP3 ACK2 ACK3 OMT 248PDR-L OMT 248PDR-G OMT 248PDR-H R
5 Hedqurters Business Center Drive Mount Prospect, IL P.O. Box 545, Mt. Prospect, IL Phone: (8) Phone: (847) x: (847) Detroit Brnch 4496 heldon Rod #23 Plymouth, MI 487 Phone: (8) Phone: (734) 45-2 x: (734) Cincinnti Brnch 445 Crver Woods Drive Cincinnti, OH Phone: (8) Phone: (53) 89-4 x: (53) Huntsville Brnch 565 nderson treet NW uite J Huntsville, AL 3585 Phone: (256) x: (256) Torrnce Brnch 224 outh Western Avenue uite 2 Torrnce, CA 95 Phone: (8) x: (3) umitomo Hrdmetl Mexico (HMM) Av. Agusclientes ur #2625 rcc. Jrdines de ls uentes Agusclientes, AG Mexico C.P Phone: x:
WAX Endmill Series. High speed, high efficiency shoulder mill for non-ferrous materials. Non-ferrous Metal
HighPerformnce Performnce Turning ystems High Milling ystems WAX Endmill eries High speed, high efficiency shoulder mill for non-ferrous mterils Non-ferrous Metl Fetures & Benefits WAX WveMill cutters
More informationSumitomo Electric Carbide, Inc. DFC Milling Cutter Series
CAT.FCBROCHURE.3/18 Sumitomo Eectric Cride, Inc. FC Miing Cutter Series GS Chipreker Expnsion Improved chip contro for shouder miing High Efficiency, 90 Miing Cutter High Performnce oue-sided 6 Edge Inserts
More informationDFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts
CAT.DFCBROCHURE.12/15 Sumitomo High Efficiency, Doule-sided 90 Milling Cutter DFC Milling Cutter Superior Toughness & Excellent Tool Life High Performance Doule-sided 6 Edge Inserts DFC Mill Features &
More informationDFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts
CAT.DFCBROCHURE.12/15 Sumitomo High Efficiency, Doule-sided 90 Milling Cutter DFC Milling Cutter Superior Toughness & Excellent Tool Life High Performance Doule-sided 6 Edge Inserts DFC Mill Features &
More informationMFPN MFPN. Reduced chattering with low cutting force design. Milling with double sided 10-edge inserts
Milling with doule sided 10-edge inserts MFPN MFPN Reduced chttering with low cutting force design conomicl 10-edge insert Low cutting force due to curved cutting edge design uppresses frcturing with dul
More informationHigh Feed Finishing of. Cast Iron. High Feed Finishing of. Cast Iron. Non-Ferrous Alloy/Thin Work Pieces. QC System
(Specil Purpose) 133 to147 (Specil Purpose) IG Chnge igh Feed Finishing of Cst Iron SEC- Series... 134 GFX13000 Type / 16000 Type... 138 GFS13000 Type... 139 GSV16000 Type... 140 GRV16000 Type... 141 igh
More informationQuality HSS (EW 9 Co 10 - cobalt 10%). Ø x l mm 16 x x x x x
Engrver's points Tool holder its Cutting-Off nd Grooving Tools 1812-1816 Engrver's Points With rough-ground profile. For use on tempered nd chrome-nickel steel. For engrving lettering, profiling for contours,
More informationFree Machining Austenitic Ferritic + Martensitic Pure Titanium Titanium Alloys Stainless Steels Stainless Steels <950N/mm 2
& - Tps For Stinless Steels These top qulity Tps re mde in Switzerlnd, by DC-Swiss, one of the leding Tp Mnufcturers in Europe. All the Tps re mde of - (Powder Metl). This mteril hs proven to be the best
More informationWFXC Type. Expansion H62. General Features. Characteristics. Series. Milling. Cutters. SEC-Wave Mill
EC-Wave ill WFX Type Expansion General Features EC-Waveill WFX type for shoulder milling, is a screw-on type cutter that uses 4-cornered inserts. Ideal cutting edge design delivers good squareness. eries
More informationNEW ROUND INSERT CUTTER DE6G_/1DE6G_ DE6H_/1DE6H_ DE6K_/1DE6K_ ROUND INSERT CUTTER
NEW ROUND INSERT CUTTER DE6G /1DE6G DE6H /1DE6H DE6K /1DE6K ROUND INSERT CUTTER DE6G_/1DE6G_ DE6H_/1DE6H_ DE6K_/1DE6K_ Double sided / high economicl 8- resp. 16-fold indexble insert 2 different insert
More informationB089E New CVD Coated Grade for Steel Turning Update UE6110. New insert grade provides outstanding durability.
B089E New CVD Coted Grde for Steel Turning 2007.7.Updte New inert grde provide outtnding durbility. New CVD Coted Grde for Steel Turning y Feture Superior mchining performnce chieved uing 2 in 1 technology
More informationVFX for High Efficiency Milling of Titanium Alloys
TOOL NEW 2017.5 Update B182A For Milling VFX eries Insert Expansion VFX for High Efficiency Milling of s Outstanding metal removal rates up to 24 inch 3 /min (with ø2.5" cutter) Unparalleled Chip Ejection
More informationSummer WDX Indexable Drills. WDX Promo Details. 1. Kit Price: Includes Drill & 10 Inserts
Summer 017 Promotion Promo valid through July 31, 017 et Sumitomo help you meet your productivity goals! WDX Indexable Drills WDX Promo Details 1. Kit Price: Includes Drill & 10 Inserts WDX Offer valid
More informationFINGER STRIPS. and other EMI shielding products. Characteristics
BERYLLIUM COPPER CONTCT FINGER STRIPS nd other EMI shielding products ppliction Due to their outstnding mteril nd electricl chrcteristics, eryllium copper fingers of different shpes nd dimensions re used
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl
More informationInternal Turning, Profiling, Grooving & Face Machining of Small Diameters
Internl Turning, Proiling, Grooving & Fce Mchining o Smll Dimeters Insert Styles/ Applictions: MINT... Turning/Chmering MINP... Turning/Proiling MINC... Turning/45º Chmering MING... Grooving MINF... Deep
More informationRPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.
Solenoid - Operted Directionl Control Vlves RPEL-0 05/0 Size 0 (D 0) 50 r (600 PSI) 0 l/min (8.0 GPM) /-, /- nd /-wy directionl control vlves with solenoid control Solenoids cn e turned round their xis
More informationMilling Cutters G1 ~ G36
G illing Generl urpose SC-Wveill SC-SUI UO SC-SUI UO Shoulder illing SC-C ill SC-C ill SC-Wvedius ill SC-Wvedius ill SC-Shoulder illing Cutter luminum illing SC-C ill High Speed luminum Body Cutter Smll
More information(mω) 1. Temperature ( C) Voltage (V) ULRG1 /
Resistors Metl Strip Current Sense Resistors Surfce Mount Metl Element Current Metl Element Sense Resistor UR Series UR Current Series Sense Resistor Mke Possible Resistnce R0005 (m ) to R015 (15m ) Metl
More informationEPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
More informationGroove Milling Inserts. Grooving Inserts
Groove Milling Inserts Grooving Inserts GROOVE MILLING INSERTS VARDEX Circlip Non Stndrd Circlip DIN 471/472 O Ring DIN 3770 O Ring BS 1806, DIN 3601, DIN 3771 O Ring BS 4518 Contents Pge 250 Pge 251 Pge
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) idirectionl lek-proof shutoff, direct cting, electriclly operted Series W2N, W2 1 Description With crtridge
More informationDirectional Control Valves. General Description. Features. Specifications
echnicl Informtion Generl Description directionl control vlves re high performnce, 5-chmer, direct operted, wet rmture, solenoid controlled, 3 or 4-wy vlves. hey re ville in 2 or 3-position nd conform
More informationSolenoid Pilot Operated Directional Control Valve
efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ Solenoid Pilot Operted Directionl Control Vlve Fetures hese models relize high-pressure lrge-flow-rte
More informationSide Cutter Series. Side Cutter with Low Cutting Resistance TOOL NEWS. Vertical mount double-sided insert for VAS and VOS. Milling B242A.
TOOL NEWS 2017. Update B242A Milling Side Cutter Series New Product Side Cutter with Low Cutting Resistance Vertical mount double-sided insert for VAS and VOS. VAS0 VAS500 VOS0 ASX0 1 Unique side cutter
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, PDF ctlogs nd opertion mnuls Solenoid Pilot Operted Directionl
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl Control Vlve Fetures hese models relize
More informationu-tec UT Our change system, that makes EVERYTHING possible
u-tec UT Our chnge system, tht mkes EVERYTHING possible Terms nd conditions: You will find them on our website www.heimtec.com Home/Imprint/Terms nd Conditions This ctlogue, including ll its prts, is protected
More information4/2- and 4/3-way shut-off valve
Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure
More informationProduct range MEGAlife
Product rnge Fx enquiries: +49 89 76909-11 sles@iwis.com MEGAlife MEGAlife mintennce free roller nd conveyor chins cn be pplied in ll res where post instlltion lubriction is not t ll or only prtly possible.
More informationAluminium Floor Outlets - Trapped Outlets
Aluminium Floor Outlets - Trpped Outlets Verticl Trpped Outlet Components Drin Body Dimensions 260 Grte* Funnel Sel Trp Assemly Funnel Cup * Elevtion Throt Throt Sel DPM Clmp Ring with Weep Bung (shown
More informationIncremental encoders Solid shaft with square flange pulses per revolution
Incrementl encoders Solid shft with squre flnge EIL580 - squre flnge - OptoPulse Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Squre flnge 2.5 (63.5 mm) Connection xil, rdil or tngentil
More informationSolenoid operated spool valve with soft switching NG10 ISO
WWMF1 Solenoid operted spool vlve with soft switching Flnge construction 4/3-wy with spring centred mid position 4/2-wy with spring reset Q mx = 12 l/min p mx = 35 r DESCRIION Direct operted solenoid spool
More informationWATERTIGHT AIRTIGHT SPECIAL ACCESS DOORS & HATCHES, PART 1 GENERAL
SECTION 08316 WTERTIGHT IRTIGHT SPECIL CCESS DOORS & HTCHES, PRT 1 GENERL HIGHLIGHTED RES TO BE INSERTED BY SPECIFYING ENGINEER. 1.1 WORK OF THIS SECTION. THE WORK OF THIS SECTION INCLUDES PROVIDING LL
More informationKit Description. Adapter Kit for Johnson Controls 1 / 2 to 2 VG7xxxxx, VB-3754, VB-3974, VB-4322, and VB-4324 Two- and Three-Way Globe Valves
Selection Guide TAC 1354 Clifford Avenue P. O. Box 2940 Loves Prk, IL 61132-2940 www.tc.com AV-8xx Series Competitive Gloe Adpters AV-8xx Series Adpter Kits TAC AV-8xx Series Adpter Kits mount on the onnet
More informationp max (see performances table) Q nom (see performances table) bar Nominal flow rate l/min Ambient temperature range C -20 / +60
4 60/7 ED DS* NEUMICLLY OERED DIRECIONL CONROL VLVE SULE MOUNING DS ISO 440-0 DS5 ISO 440-05 p mx (see performnces tle) Q nom (see performnces tle) OERING RINCILE he DS * re pneumticlly operted () directionl
More informationThe original quick jaw change power chuck KNCS -NB KNCS -NBX >> ALL EXISTING TOP JAWS CAN USED.
Fst chngeover, fst pybck: The originl quick jw chnge power chuck KC - KC -X ARE TROU OE EXTRA ARE TROU OE >> A EXITI TOP JAW CA UED. Miniml set-up times Jw chnge in less thn 1 minute igh repetbility when
More informationFRONT SIDE FIX WINDOW
WINSHIEL/WINOWGLSS/MIRROR FRONT SIE FIX WINOW REPLEMENT FRONT SIE FIX WINOW The instlltion procedures re the removl procedures in reverse order. However, only instlltion procedures requiring dditionl informtion
More informationALPHA MILL P H M S K N 90 SQUARE SHOULDER MILLING WITH LOW CUTTING RESISTANCE & SMOOTH CHIP FLOW GENERAL
90 QUARE OULDER ILLIG WIT LOW CUTTIG REITACE & OOT CI FLOW teel ardened teel tainless teel RA s Cast Iron on Ferrous FEATURE - Inserts feature Alpha Curve geometry for the smoothest cutting action - Low
More informationSEC-Grooving Tool Holders. Stable Machining through Outstanding Chip Control and Chattering Resistance Performance
Product News No.492 Grooving / Cut-off Tools EC-Grooving Tool s 12-017 (GND型) -7$ (&2 352'8&7 ష෭ Ӥ أܞ ܞ Ӕ -7$ գ ଳཋ ട (GNDI型) table Machining through Outstanding Chip Control and Chattering Resistance Performance
More informationMANN+HUMMEL Oil-bath air cleaner Single-stage air cleaner without spare parts
MANN+HUMMEL Oil-th ir clener Single-stge ir clener without spre prts 57 Oil-th ir clener: Servicing without spre prts The proven oil-th ir cleners from MANN+HUMMEL re suitle for light to medium dust conditions
More informationData Sheet T /4/5/6 EN
Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 20 l/min (5.3 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, with EX-sfty sol. coil Vlve: With crtridge vlve,
More informationGrooving / Cut-Off. Threading Tools F63
/ / 1 42 Triangular hallow Inserts (or External and Internal Grooves) External ace Internal Hardened teel Expanded Expanded Expanded EC- election Guide...2 GWC Type (or hallow Grooves)... 4 GWC Type (or
More informationMFH-RAPT R High Feed Milling Cutter
MFH-RAPT R High Feed Milling Cutter -MiNi Expanded Lineup New MFH-Mini end mills now available in diameters from 0.625 to 1.250 Higher Productivity Double-sided 4-edge inserts will save money and increase
More information11 263/ Radial Piston Pump Model R4 /Series 2X Fixed Displacement. Ordering Code 1 PF 1 R4 2X R Replaces:
ize.60 to 0.00 Rdil iston ump Model R4 /eries X Fixed Displcement 0,0 I (00 br).9 in /rev (9.4 cm /rev) RA 6/0.9 RA 6/0.9 Replces: 06.89 K 6/ Rdil piston pump with 0 pistons nd prllel shft Chrcteristics:
More informationAWWA Grooved Fittings
WW Grooved Sumittl Form WW Grooved Fittings SUMITT INFORMTION PROECT NME: ENGINEER: CONTRCTOR: WW Grooved Fitting SPEC. SECTION: MEMER FETURES & DVNTGES Fittings supplied with rigid rdius grooves in ordne
More informationDC CONTACTOR. hubbell industrial controls, inc. Hubbell Industrial Controls, Inc. Type Ampere 1500 Volt DC Contactor
Huell Industril Controls, Inc. 716 1600 Ampere 1500 Volt DC Contctor Ctlog 42716 Mrch 2013, Replces Septemer 2005 42716 Highlights Non-polrized rc chute (series lowout coil) design s stndrd Optionl polrized
More informationVishay Dale Inductors
IM Inductors Military, MIL-C- ualified, Type LT and Commercial, Molded FETURES Wide inductance range in small package. Flame retardant coating. Precision performance, excellent reliability, sturdy construction.
More informationJanuary /9. New Cutter with Strong Insert
1/9 New Cutter with Strong Insert 2/9 New cutter with strong insert FEATURES Higher insert thickness, stronger screw systems for heavy or demanding applications Exceptional performance at very high feed
More informationThe widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.
FUME XTRACTION ARMS Improving your workspce Chemicl resistnt Antisttic Stndrd FX ARMS The widest rnge to provide the optimum tilor mde solutions to your fume nd gs extrction needs. Avilble in Stndrd, Antisttic
More informationInstallation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB)
Plese red these Opertionl Instructions crefully nd follow them ccordingly! Ignoring these Instructions my led to mlfunctions or to clutch filure, resulting in dmge to other prts. These Instlltion nd Opertionl
More informationS»'94**gres* 6,=4.4.0 R\OF e.. S Z * 0 10.,5251, *S .//0/1111\\\\\\ VIWINCO INC. S-SERIES IMPACT AW/FIX STACKED 04/13/12
ISIONS DTE 07/27/5 ISED INSTLLTION DETILS RL THE PRODUCT SHOWIN HEREIN IS DESIGNED ND MNUFCTURED TO COMPLY WITH REQUIREME OF THE FLORID UILDING CODE 2 WOOD FRMING ND MSONRY OPENIING TO E DESIGNED l\id
More information4/3, 4/2 and 3/2 explosion-proof solenoid directional valve
01/06 4/3, 4/2 nd 3/2 explosion-proof solenoid directionl vlve Type G...WE6...L6X 2.21 Size (NG) 6 Up to 350 br Up to 80 L/min Contents Function nd configurtion Specifictions 03 Spool symbols 03 Technicl
More informationVB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents
V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx
More informationTR4D. High Feed Radius Mill. New Product News No. H1901A
TR4D High Feed Radius Mill New Product News No. H1901A-1 2019-1 Technology Applications Roughing Copper Carbon steel Alloy steel Stainless steel Pre-hardened steel Hardened steel Hardened steel Tool steel
More information4/2 and 4/3 Solenoid Directional Valve, ISO Size 03
4/ nd 4/3 Solenoid Directionl Vlve, ISO Size 03 Q mx = 60 l/min, p mx = 315 r wo-stge design, with EX-sfty solenoid coil Vlve: High switching relilility thnks to two-stge follower spool design Slip-on
More informationSpecial Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4
Contents Version Actution Port size Pge Chrcteristics Dimensions 3/2, 5/2 nd 5/3 Wy Vlves with NAMURconnections Series S9 5/2 Wy Vlves for Two Hnd Opertion Series S9 Time Dely Vlve for 2-Hnd Sfety Strt
More informationGrinding CP9120CR CP7500D CP9120CR. < 0.8 hp (600W) Angle Wheel Grinders 2" to 4.5" FEATURES BENEFITS LIGHTWEIGHT & COMPACT CUTTING & GRINDING
Grinding < () Angle heel Grinders 2" to." CP9120CR LIGHTEIGHT & CP00D RPM 22,000 RPM EASY HANDLING COMPACT CUTTING & GRINDING - " ( ) wheel cpcity - ( ) governed motor - Adjustble protective gurd - Aluminum
More informationCast stone collection 2014 bathtubs, washbasins, shower trays
Cst stone collection 2014 bthtubs, wshbsins, shower trys Dimension: 1700 x 830 x 610 mm h = 730, 680 mm Free stnding bthtub Volume: 225 l Mteril: cst stone Colour:, grnite, Avilble: ll Bthtub with wooden
More information4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:
4/ - 4/ Directionl vlve elements L8_81 with proportionl (ED4-1) control nd with or without LS connections L8_81 (ED4-1) RE 181-1 Edition: 9.18 Replces: 7.1.17 Size Series Mximum operting pressure r (4
More informationHVB HYDRAULIC VIBRA PUMPS
1 HV HYDRULIC VIR PUMPS Dynaset HV Vibra Pump improves significantly standard bucket vibration and soil penetration. This value-added feature reduces working time and saves machinery expenses. HV350/ 9-40
More informationThe quick jaw change chuck KNCS-NB / KNCS-NBX can use all existing top jaws KNCS-NB
Fst chngeover, fst pybck: The quick jw chnge chuck KNCS-NB / cn use ll existing top jws KNCS-NB/: cn use existing jws Miniml set-up times Jw chnge in less thn 1 minute KNCS -NB High repetbility when chnging
More informationPTC Thermistors For Degaussing, Dual, Mono And Double Mono Cased
222 662 96... PTC Thermistors For Degaussing, FETURES a. Dual or double mono PTC degaussing. M6 Residual currents as low as 2 m (p-p), ideal for high-resolution displays Long decay time Stable performance
More informationElectrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL
LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic
More informationProduct Information / Order Code
Product Information / Order ode Order odes eries and Type low onitoring ystem G - 0.04 - - 1 - V - X G Version 0,002... 2 l/min / 0.0005... 0.53 U GP 0.02 0,004... 4 l/min / 0.0011... 1.06 U GP 0.04 0,01...
More informationResilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator
Worldwide ontacts www.tyco-fire.com Resilient-Seated Gate Valves with Vertical or ross Wall Post Indicator General Description TYO Resilient-Seated Gate Valves with Vertical and ross Wall Indicators are
More informationResilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator
Worldwide ontacts www.tyco-fire.com Resilient-Seated Gate Valves with Vertical or ross Wall Post Indicator General Description TYO Resilient-Seated Gate Valves with Vertical and ross Wall Indicators are
More informationBrazed heat exchanger XB
Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the
More informationWith over 100 different standard configurations... And still growing! Remember to use COPASLIP anti-seize compound on all insert screws
With over 100 different standard configurations...... And still growing! Standard Length End Mills TXD90-0500.500.625 3.00 1.09 1 TXD90-0625.625.625 3.00 1.09 2 TXD90-0750 3.50 1.47 2 TXD90-0750F 3.50
More informationVictory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B40. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
More informationNM, NMS. Close Coupled Centrifugal Pumps with flanged connections. Construction. Operating conditions. Motor
The electropump NM,, NMS erie comply ith the Europen Regultion no. 7/. Mteril omponent NM, NMS Pump cing t iron ronze Lntern rcket NM ing cover for NMS GJL EN Gu Sn EN Lntern rcket NMS t iron GJL EN Impeller
More informationHOW TO READ THE STANDARD OF GROOVING
OW TO A T STANA O GOOVING ow this section pge is orgnized zclssified ccording to externl or internl pplictions. xsub-clssified ccording to product series. (efer to the index on the next pge.) [or xternl
More informationVictory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B39. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
More informationApplication Examples of Air-piloted Valves
ir-piloted Vlves Fetures Since the unit requires ir piping only, with no need for electricl wiring, it cn e hndled y person without fer of electricl shocks or current lekge. Using no electricity mens tht
More informationR E V I S I O N REV. DRAWN BY ECO No DESCRIPTION DATE APPROVED BILL OF MATERIALS
NOTES: UNLESS OTHERWISE SPECIFIED. CORNERS DRWN SHRP TO E R.005 MXIMUM. 2. EXTERIOR SURFCE TEXTURE TO E EQUIVLENT TO MT-007. TEXTURE ON ENCLOSURE WILL VRY FROM TIME TO TIME S THE TOOL WERS ND IT ECOMES
More informationTHREADING TECHNOLOGY Ê-7 --Ê- THREADING TOOLS FOR AEROSPACE. ÓÇÎxÊ > ià>þ. /i ʳ{ ÊÎÓÊ{ ÊÈÎÊÈÎ >Ýʳ{ ÊÎÓÊ{ ÊÈ{ÊÈ{ > \Ê v J`VÃÜ Ãà V
DO-01-04-07..N THRADING TCHNOLOGY We hve mde every effort to ensure tht the informtion (drwings, prints, technicl dt) given is correct. However, we do not ssume ny responsibility for ny errors, omissions
More informationHitachi Tool Engineering Europe GmbH. No
Hitachi Tool Engineering Europe GmbH No. 324.2 Indexable illing Too S The new S/HU ini has 2 kinds of insert shapes and applications: JDT type insert for 90 cutting JDT Schneidplatte für 90 earbeitungen
More informationHSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
More informationMultiply the possibilities, go beyond the limits
Multiply the possiilities, go eyond the limits WARRANTY LIFETIME POWERED BY NITEKO Modulr high performnce LED floodlight Glleries High power plus compct nd essentil design: Multiplo ws orn for lrge res
More informationDirectional Valve Size 06 WL 4.06
Directionl Vlve Size 06 WL 4.06 Instlltion dimensions ISO 4401/DIN 24340 6 Directionl vlve size 06 instlltion dimensions ISO 4401 / DIN 24340 6 Functionl Description he directionl control vlves WL 4/06
More informationBERMAD Waterworks. 400 Series. Basic Valve. ??????? WW-400 Basic Valve
Bsic Vlve??????? WW-400 Bsic Vlve The bsic Model WW-400 diphrgm ctuted hydruliclly operted vlve is t the leding edge of control vlve design. It combines simple nd relible construction with superior performnce,
More informationCOLLECTION OF CAST STONE PRODUCTS
COLLECTION OF CAST STONE PRODUCTS Dimension: 1700 x 830 x 610 mm h = 730, 680 mm Free stnding bthtub Volume: 225 l Bthtub with wooden legs Bthtub with STILO legs Bthtub with ANTICA legs chrome gold Drin-overflow
More informationM.A.FORD Where high performance is the standard.
For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,
More informationMISCELLANEOUS INDEX PAGE DATE SERIES DESCRIPTION
MISCELLNEOUS INDEX 08/01/11 PGE DTE SERIES DESCRIPTION M-1 08/01/11 Miscellaneous Index M-2 04/16/96 M01 Tooling all M-3 04/16/96 M02 Scrap Chute Hook and Retainer racket M-4 01/03/95 M03 Scrap Chute Chain
More informationDirectional Valve Size 04 WL 4.04
Directionl Vlve Size 04 WL 4.04 Instlltion dimensions ISO 4401/ DIN 24340 4 Directionl vlve size 04 instlltion dimensions ISO 4401 / DIN 24340 4 Functionl description he directionl control vlves WL 4/04
More information41set. redhen MODUL GABION SYSTEM. 41 means:
1 MODUL GABION SYSTEM redhen 41set 41 mens: module system which llows you to build vrious forms of gbion rchitecture using just few components 4 pcs. d41x68 8 pcs. n41 "while you wit order reliztion with
More informationPress control block PSB Type approved according to DIN EN 693
Press control lock PS Type pproved ccording to DIN EN 693 Description The press control locks PS in the nominl sizes 06 nd 0 re modulr control locks with EC type pprovl for use in hydrulic presses ccording
More informationTA25DU0.4 Overload Relay a. Features. Descriptions
3804 South Street 7594-723, TX Ncogdoches Phone: 93-59-7941 Fx: 93-50-485 0.4 Overlod Rely-0.25 0.4 Thoms&Betts-Abb Ins Prod Ctlog Number Mnufcturer Description Weight per unit Product Ctegory Fetures
More informationJOB LOSSES BY STATE, State Industry US total AK AL AR AZ CA CO CT Agriculture, forestry, fisheries -15, ,
State US total AK AL AR AZ CA CO CT -15,597-35 -272-248 -232-3,163-132 -46-3,858-68 4-19 -291-303 -116-11 -3,318-9 -55-32 -73-314 -66-35 -554,750-194 -14,113-7,789-4,781-55,255-4,453-6,836-9,326-13 -190-282
More informationSchematic diagram for the 8200 vector, 230 V Schematic diagram for the 8200 vector, 400/500V 1)
Generl informtion should e used to reduce the lod on the motor windings, s well s to reduce the cpcitive lekge currents to PE tht my e cused y the use of long motor cles. A motor filter is required: if
More informationUltrasonic Flow Meter
Ultrsonic Flow Meter mesuring monitoring nlysing Mesuring rnge: up to 20 m/s Accurcy: ±0.5% of m. v. pmx PN 100, tmx 180 C Flnge DN 25...1000, DIN /ANI teel or stinless steel 1.4404 Anlogue, frequency,
More informationPREFILL AND EXHAUST VALVE PV 100 TO PV 200
PREFILL ND EHUST VLVE Ref. No. Relese 08/2006 1 Description Set type construction. llows free flow from it's port to port. Flow from port to port cn e hd y pplying pilot pressure to it's port. The decompression
More information2/2, 3/2 and 4/2 directional poppet valve with solenoid actuation
0/0 /, / nd / directionl poppet vlve with solenoid ctution.7 Type M-.SEW...LX Size Up to 0 r Up to 0 L/min Contents Function nd configurtion Symols 0 Specifiction 0 Technicl dt 0 Electricl dt 0 Chrcteristic
More informationUPDATE. Ultra-Shear High Performance Button Cutter. Insert Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN)
Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN) Face Mills: 1A7G (10mm IC insert) 1A7H (12mm &.500" IC insert) 1A7K (16mm IC insert) 1A7M (20mm &.750" IC insert) End Mills: 15B1A (10mm IC insert)
More informationKGD/KGDF KGD/KGDF. Grooving / Cut-Off. Improved Grooving Performance with Expansive Lineup of Chipbreakers and Toolholders. Grooving / Cut-Off
Grooving / Cut-Off KGD/KGDF Grooving / Cut-Off KGD/KGDF Improved Grooving Performance with Expansive ineup of Chipbreakers and s Good chip control EGACOAT coating technology for long tool life and high
More informationExcellent SHOULDERING with 3-corner insert. Multi milling tool for best results in perpendicular shouldering
Rich Mill Series Multifunctional Shouldering Milling Tool Excellent SHOULDERING with 3-corner insert Multi milling tool for best results in perpendicular shouldering High rake chipbreaker for high speed
More informationMSR SERIES MSR RACK MOUNTING ENCLOSURE FEATURE. CAD data is downloadable from our web. Available in 16 sizes. Screws are not appeared on the surface.
MSR SERIES MSR RACK MOUNTING ENCLOSURE CAD dt is downlodble from our web. Avilble rnge -30 FEATURE Avilble in 16 sizes. Screws re not ppered on the surfce. Esy to punching or hole milling on front nd rer
More information