WINDLASSES AND WINCHES. Chap.

Size: px

Start display at page:

Download "WINDLASSES AND WINCHES. Chap."

Kelley Sullivan
5 years ago
Views:

1 INDLASSES AND INCHES indlasses ertical On deck Horizontal Capstans atertight hand held remote control Chain counter Receivers Remote controls Solenoids unit Calibrated chain You can consult this chapter even with your mobile device. - reba@rebamarine.com 275

INDLASSES PRINCE INDLASS PRINCE DP1 Aisi 316 Stainless steel base ith and without drum Manual Free-Fall system Inspection cover atertight motor Anodized aluminium gearbox 132 (5 15/32) 181 (7 23/32)

500 12 660 200 6 25,2 6-9 7,6 RE 90702 500 24 660 220 6 25,2 6-9 7,6 RE 90703 500HS 12 600 170 6 39 6-9 7,6 RE 90704 500HS 24 600 200 6 39 6-9 7,6 RE 90705 PRINCE DP1 ITH DRUM Chain sizes Chain speed

2 INDLASSES PRINCE INDLASS PRINCE DP1 Aisi 316 Stainless steel base ith and without drum Manual Free-Fall system Inspection cover atertight motor Anodized aluminium gearbox 132 (5 15/32) 181 (7 23/32) 82 (3 7/32) 61 (2 13/32) 69 (2 23/32) 119 (4 11/16) 73 (3 7/64) 244 (9 5/8) PRINCE DP1 ITHOUT DRUM Chain sizes Chain speed eight orking load () dimensions mt , ,6 RE , ,6 RE , ,6 RE HS ,6 RE HS ,6 RE PRINCE DP1 ITH DRUM Chain sizes Chain speed eight orking load () dimensions mt , ,4 RE , ,4 RE , ,4 RE HS ,4 RE HS ,4 RE reba@rebamarine.com

INDLASSES PRINCE INDLASS PRINCE DP2 Aisi 316 Stainless steel base ith and without drum Manual Free-Fall system Inspection cover atertight motor 79 (3 7/64) 119 (4 11/16) 139 (5 15/32) 79 (3 7/64) 82

6 (5 27/32) 68 (2 47/64) 78 (3 1/16) 700 330 (13) 139 (5 15/32) 27/32) 1 (5 9/16) 8.

3 INDLASSES PRINCE INDLASS PRINCE DP2 Aisi 316 Stainless steel base ith and without drum Manual Free-Fall system Inspection cover atertight motor 79 (3 7/64) 119 (4 11/16) 139 (5 15/32) 79 (3 7/64) 82 (3 7/32) 68 (2 47/64) 78 (3 1/16) 196 (7 23/32) (9 5/8) 79 (3 7/64) 1 (5 9/16) 139 (5 15/32) 196 (7 23/32) 8.6 (5 27/32) 68 (2 47/64) 78 (3 1/16) (13) 139 (5 15/32) 27/32) 1 (5 9/16) 8.6 (5 68 (2 47/64) 78 (3 1/16) 196 (7 23/32) (13 3/8) PRINCE DP2 ITHOUT DRUM Chain sizes Chain speed eight orking load () dimensions mt , ,8 RE , ,8 RE , ,8 RE HS ,8 RE HS , ,8 RE , ,6 RE , ,6 RE , ,7 RE , ,7 RE PRINCE DP2 ITH DRUM Chain sizes Chain speed eight orking load () dimensions mt , ,7 RE , ,7 RE , ,7 RE HS ,7 RE HS , ,7 RE , ,3 RE , ,3 RE , ,4 RE , ,4 RE reba@rebamarine.com 277

4 INDLASSES PRINCE INDLASS PRINCE DP3 Aisi 316 Stainless steel base ith and without drum Manual Free-Fall system Inspection cover atertight motor 8.6 (5 27/32) 9/16) 99 (3 57/64) 1 (5 78 (3 23/32) 95 (3 47/164) 246 (9 11/16) 164 (6 11/32) (13) 164 (6 11/32) 246 (9 11/16) 164 (6 11/32) 246 (9 11/16) 162 (6 1/4) 78 (3 23/32) 95 (3 47/164) 167 (6 37/64) 99 (3 57/64) 8.6 (5 27/32) 78 (3 23/32) 95 (3 47/164) 1 (5 9/16) 99 (3 57/64) (13 3/8) ( 49/64) PRINCE DP3 ITHOUT DRUM Chain sizes Chain speed eight orking load () dimensions mt , RE , RE , ,1 RE , ,1 RE , ,4 RE , ,4 RE PRINCE DP3 ITH DRUM Chain sizes Chain speed eight orking load () dimensions mt , RE , RE , ,1 RE , ,1 RE , ,4 RE , ,4 RE reba@rebamarine.com

INDLASSES PRINCE INDLASSES DP2E Stainless steel Aisi 316 base ith and without drum Rope and chain on a single gypsy Manual

epicyclical gearbox, that provides much higher efficiency (40% compared to equivalent traditional gearboxes).

8,3 RE 90754 800 24 820 290 6-7-8 22,6 8,3 RE 90755 eight PRINCE DP2E ITH DRUM orking load () Chain sizes Chain speed 500 12

5 INDLASSES PRINCE INDLASSES DP2E Stainless steel Aisi 316 base ith and without drum Rope and chain on a single gypsy Manual Free-Fall system Supplied with pressure lever Inspection cover watertight to IP67 The DP2E windlass is equipped with an epicyclical gearbox, that provides much higher efficiency (40% compared to equivalent traditional gearboxes). PRINCE DP2E ITHOUT DRUM orking load () Chain sizes Chain speed ,9 8,3 RE ,5 8,3 RE ,6 8,3 RE eight PRINCE DP2E ITH DRUM orking load () Chain sizes Chain speed ,9 9,1 RE ,5 9,1 RE ,6 9,1 RE eight - reba@rebamarine.com 279

INDLASSES DYLAN INDLASSES DYLAN DH4 ertical windlasses. Base in anodized aluminium in hard oxide ith and without drum.

Inspection lid IP67 watertight motor (1500-1700 ).

5/8" - 3/4" 25-50 12-15 23,2 RE 90780 1700 12 170 1150 155 10-13 5/8" - 3/4" 30-70 - 16 25,1 RE 90781 1700 24 95 1200 190 10-13 5/8" - 3/4" 30-70 - 16 25,1 RE 90782 2000 24 105 1600

6 INDLASSES DYLAN INDLASSES DYLAN DH4 ertical windlasses. Base in anodized aluminium in hard oxide ith and without drum. Rope and chain on a single gypsy Integrated sensor and magnet for chain counter Manual free-fall system. Emergency manual lift system Supplied with pressure lever. Inspection lid IP67 watertight motor ( ). IP66 watertight motor (2000 ) 1500 / 1500D 1700 / 1700D A DYLAN ITHOUT DRUM orking load DYLAN ITH DRUM Rope size thickness dimesions eight 2000 / 2000D /8" - 3/4" ,2 RE /8" - 3/4" ,1 RE /8" - 3/4" ,1 RE /8" - 3/4" ,7 RE A orking load Rope size thickness dimesions /8" - 3/4" ,5 RE /8" - 3/4" ,4 RE /8" - 3/4" ,4 RE /8" - 3/4" ,0 RE eight reba@rebamarine.com

INDLASSES DYLAN INDLASSES DYLAN DR4 ertical windlasses. Stainless steel AISI 316 and anodized aluminium base in hard oxide ith and without drum.

Rope thickness dimensions m eight 2000 / 2000D 1500 12 150 1100 400 10-12 - 13 5/8" - 3/4" 25-50 12-15 25,8 RE 90420 1700 12 170 1100 470 10-12 - 13 5/8" - 3/4" 30-70 - 16 26,2 RE 90421 1700 24 95

7 INDLASSES DYLAN INDLASSES DYLAN DR4 ertical windlasses. Stainless steel AISI 316 and anodized aluminium base in hard oxide ith and without drum. Rope and chain on a single gypsy Manual free-fall system Emergency manual lift system Supplied with pressure lever Inspection lid IP67 watertight motor 1500 / 1500D 1700 / 1700D Engine A orking max Rope thickness dimensions m eight 2000 / 2000D /8" - 3/4" ,8 RE /8" - 3/4" ,2 RE /8" - 3/4" ,4 RE /8" - 3/4" ,4 RE Engine A DYLAN ITHOUT DRUM DYLAN ITH DRUM orking max Rope thickness dimensions m /8" - 3/4" ,8 RE /8" - 3/4" ,2 RE /8" - 3/4" ,8 RE /8" - 3/4" ,4 RE eight - reba@rebamarine.com 281

INDLASSES DAE INDLASS DAE - RIGHT CHAIN PIPE D5X Stainless steel Aisi 316 base ith and without drum Rope and chain on a single gypsy Manual Free-Fall system Emergency manual lift system with

3000 24 5 3100 1200 10-12/13-30 - 70 39,2 20-24 RE 90744/R 3000 230/400-2800 930 10-12/13-30 - 70 15,4 20-24 RE 90745/R A DAE ITHOUT DRUM RIGHT DAE HYDRO ITHOUT DRUM RIGHT orking max DAE ITH DRUM

8 INDLASSES DAE INDLASS DAE - RIGHT CHAIN PIPE D5X Stainless steel Aisi 316 base ith and without drum Rope and chain on a single gypsy Manual Free-Fall system Emergency manual lift system with chain-stopper (optional) Supplied with pressure lever Inspection cover watertight to IP67 (1700 ) and IP66 (2300 ) 2300 / 2300D 3000 / 3000D A orking load () thickness chain Speed () / RE 90741/R / , RE 90742/R / , RE 90759/R / , RE 90743/R / , RE 90744/R / / , RE 90745/R A DAE ITHOUT DRUM RIGHT DAE HYDRO ITHOUT DRUM RIGHT orking max DAE ITH DRUM RIGHT orking load () thickness chain Speed () / RE 90747/R / , RE 90748/R / , RE 90749/R / , RE 90750/R / / , RE 90751/R DAE ITH DRUM RIGHT thickness chain Speed () / RE 90746/R orking max thickness chain Speed () / RE 90752/R reba@rebamarine.com

INDLASSES DAE INDLASS DAE LEFT CHAIN PIPE D5Y Stainless steel Aisi 316 base.

Inspection cover watertight to IP67 (1700 ) and IP66 (2300 ) 1700 / 1700D 2000 / 2000D A orking load () thickness chain Speed () 1700 12 175 1100 470 10-12/13-30 - 70 36.

3000 24 5 3100 1200 10-12/13-30 - 70 39,2 20-24 RE 90744/L 3000 230/400-2800 390 10-12/13-30 - 70 15,4 20-24 RE 90745/L A DAE HYDRO ITHOUT DRUM LEFT orking max DAE ITH DRUM LEFT orking load ()

9 INDLASSES DAE INDLASS DAE LEFT CHAIN PIPE D5Y Stainless steel Aisi 316 base. ith and without drum Rope and chain on a single gypsy Manual Free-Fall system Emergency manual lift system with chain-stopper (optional) Supplied with pressure lever. Inspection cover watertight to IP67 (1700 ) and IP66 (2300 ) 1700 / 1700D 2000 / 2000D A orking load () thickness chain Speed () / RE 90741/L / , RE 90742/L / , RE 90759/L / , RE 90743/L / , RE 90744/L / / , RE 90745/L A DAE HYDRO ITHOUT DRUM LEFT orking max DAE ITH DRUM LEFT orking load () thickness chain Speed () / RE 90747/L / , RE 90748/L / , RE 90749/L / , RE 90750/L / / , RE 90751/L DAE ITH DRUM LEFT thickness chain Speed () / RE 90746/L DAE ITHOUT DRUM LEFT orking max thickness chain Speed () / RE 90752/L Codice - reba@rebamarine.com 283

INDLASSES DUKE DUKE INDLASS RIGHT CHAIN PIPE D6X Base, drum and gypsy cover in stainless steel AISI 316 Available with left chain pipe or with right chain pipe on request 209 (8 15/64) 174 (6 27/32)

5 (10 23/32) 409 (16 7/64) 209 (8 15/64) 137 (5 25/64) 131 (5 5/16) 590 (23 15/64) 3500 / 3500D 322 (12 43/64) 233 (6 11/64) 409 (16 7/64) 209 (8 15/64) 137 (5 25/64) 131 (5 5/16) 174 (6 27/32) 272.

10 INDLASSES DUKE DUKE INDLASS RIGHT CHAIN PIPE D6X Base, drum and gypsy cover in stainless steel AISI 316 Available with left chain pipe or with right chain pipe on request 209 (8 15/64) 174 (6 27/32) (11 23/64) 137 (5 25/64) 131 (5 5/16) 198 (7 51/64) 409 (16 7/64) 275 (10 23/32) 590 (23 15/64) 3000 / 3000D (11 23/64) 198 (7 51/64) 174 (6 27/32) (10 23/32) 409 (16 7/64) 209 (8 15/64) 137 (5 25/64) 131 (5 5/16) 590 (23 15/64) 3500 / 3500D 322 (12 43/64) 233 (6 11/64) 409 (16 7/64) 209 (8 15/64) 137 (5 25/64) 131 (5 5/16) 174 (6 27/32) (10 23/32) Engine A DUKE ITHOUT DRUM RIGHT CHAIN PIPE orking max thickness Chain Speed () 598 (23 35/64) 4000 / 4000D / RE 90453/R / RE 90454/R / / , RE 90455/R / / , RE 90456/R eight Pressione Bar Engine Portata Tiro A Carico DUKE HYDRO ITHOUT DRUM RIGHT CHAIN PIPE DUKE ITH DRUM RIGHT CHAIN PIPE orking max Spessore coperta elocità di recupero thickness Chain Speed () Dimensione imbarcazione m / RE 90461/R / RE 90457/R / RE 90458/R / / , RE 90459/R / / , RE 90460/R DUKE HYDRO ITH DRUM RIGHT CHIAN PIPE orking max thickness Chain Speed / RE 90462/R Peso eight eight reba@rebamarine.com

INDLASSES DUKE DUKE INDLASS LEFT CHAIN PIPE D6Y Base, drum and gypsy cover in stainless steel AISI 316 Available with left chain pipe or with right chain pipe on request 209 (8 15/64) 137 (5 25/64)

5 (10 23/32) 409 (16 7/64) 209 (8 15/64) 137 (5 25/64) 131 (5 5/16) 406 (15 31/32) Hydro / D Engine A DUKE ITHOUT DRUM LEFT CHAIN PIPE orking max thickness Chain Speed () DUKE HYDRO ITHOUT DRUM LEFT

11 INDLASSES DUKE DUKE INDLASS LEFT CHAIN PIPE D6Y Base, drum and gypsy cover in stainless steel AISI 316 Available with left chain pipe or with right chain pipe on request 209 (8 15/64) 137 (5 25/64) 131 (5 5/16) 322 (12 43/64) 174 (6 27/32) 233 (6 11/64) 409 (16 7/64) (10 23/32) 612 (24 3/32) 5000 / 5000D (11 23/64) 198 (7 51/64) 174 (6 27/32) (10 23/32) 409 (16 7/64) 209 (8 15/64) 137 (5 25/64) 131 (5 5/16) 406 (15 31/32) Hydro / D Engine A DUKE ITHOUT DRUM LEFT CHAIN PIPE orking max thickness Chain Speed () DUKE HYDRO ITHOUT DRUM LEFT CHAIN PIPE DUKE ITH DRUM LEFT CHAIN PIPE / RE 90453/L / RE 90454/L / / , RE 90455/L / / , RE 90456/L Engine A orking max orking max thickness thickness Chain Speed Chain Speed () / RE 90461/L / RE 90457/L / RE 90458/L / / , RE 90459/L / / , RE 90460/L DUKE HYDRO ITH DRUM LEFT CHAIN PIPE orking max thickness Chain Speed / RE 90462/L eight eight eight eight - reba@rebamarine.com 285

INDLASSES ALEPH INDLASSES ALEPH AL3 ertical windlasses Base in anodized aluminium in hard oxide ith and without drum Rope and chain on a single gypsy Manual free-fall system Emergency manual lift

IP67 watertight motor A ALEPH ITHOUT DRUM orking load ALEPH ITH DRUM 700 / 700D 1000 / 1000D 1500 / 1500D Rope size thickness dimesions 700 12 95 680 300 8-10 1/2" - 9/16" - 5/8" 25-50 7-10 16,2 RE

10-13 17,5 RE 90288 1500 12 155 1100 470 8-10 1/2" - 9/16" - 5/8" 30-50 12-15 22,2 RE 90289 1500 24 85 1100 540 8-10 1/2" - 9/16" - 5/8" 30-50 12-15 22,2 RE 90290 *Available also gypsy for rope only

12 INDLASSES ALEPH INDLASSES ALEPH AL3 ertical windlasses Base in anodized aluminium in hard oxide ith and without drum Rope and chain on a single gypsy Manual free-fall system Emergency manual lift system Supplied with pressure lever Inspection lid. IP67 watertight motor A ALEPH ITHOUT DRUM orking load ALEPH ITH DRUM 700 / 700D 1000 / 1000D 1500 / 1500D Rope size thickness dimesions /2" - 9/16" - 5/8" ,2 RE /2" - 9/16" - 5/8" ,2 RE /2" - 9/16" - 5/8" ,5 RE /2" - 9/16" - 5/8" ,5 RE /2" - 9/16" - 5/8" ,2 RE /2" - 9/16" - 5/8" ,2 RE *Available also gypsy for rope only A orking load Rope size thickness dimesions /2" - 9/16" - 5/8" ,4 RE /2" - 9/16" - 5/8" ,4 RE /2" - 9/16" - 5/8" ,7 RE /2" - 9/16" - 5/8" ,7 RE /2" - 9/16" - 5/8" ,4 RE /2" - 9/16" - 5/8" ,4 RE *Available also gypsy for rope only eight eight reba@rebamarine.com

INDLASSES RIDER RIDER INDLASSES R1 - R3 Rider range got a round base in anodized aluminium.. Manual Free-Fall system.

speed () thickness 500 12 80 660 200 6 25,2 20 30 5 9 7,40 RE 90002 500 24 40 660 220 6 25,2 20 30 5 9 7,40 RE

90009 1000 12 0 1000 370 6-8 - 10 39,6 25 50 10 13 17,10 RE 90010 1000 24 80 1000 450 6-8 - 10 40,9 25 50 10 13

15 19,40 RE 90013 Engine A RIDER ITHOUT DRUM RIDER ITH DRUM orking max Chain* sizes chain speed () thickness 500 12

10 27,4 25 50 7 10 18,00 RE 900 700 24 55 850 300 6-8 - 10 26,4 25 50 7 10 18,00 RE 90015 1000 12 0 1000 370 6-8 -

6-8 - 10 33 30 50 12 15 21,40 RE 90018 00 24 85 1100 500 6-8 - 10 29,7 30 50 12 15 21,40 RE 90019 *Measurements

13 INDLASSES RIDER RIDER INDLASSES R1 - R3 Rider range got a round base in anodized aluminium.. Manual Free-Fall system. IP67 watertight motor 500 / 500D 700 / 700D R1 R / 1000D 00 / 00D Engine A orking max Chain* sizes chain speed () thickness , ,40 RE , ,40 RE , ,00 RE , ,00 RE , ,10 RE , ,10 RE ,40 RE , ,40 RE Engine A RIDER ITHOUT DRUM RIDER ITH DRUM orking max Chain* sizes chain speed () thickness , ,50 RE , ,50 RE , ,00 RE , ,00 RE , ,10 RE , ,10 RE ,40 RE , ,40 RE *Measurements taken with a gypsy for a 8 chain ( 6 for 500 windlasses). Other gypsy available eight eight - reba@rebamarine.com 287

INDLASSES REGAL REGAL INDLASS RIGHT CHAIN PIPE RG5X Base and chain pipe in stainless steel AISI 316 Available with right (see photo) or left chain pipe Manual free-fall system Safety chain stopper

14 INDLASSES REGAL REGAL INDLASS RIGHT CHAIN PIPE RG5X Base and chain pipe in stainless steel AISI 316 Available with right (see photo) or left chain pipe Manual free-fall system Safety chain stopper integrated IP67 watertight motor 162 (6 1/4) 1 (4 31/64) 221 (8 45/64) (6 51/64) 265 (10 7/16) Ø190 (7 1/2) 133 (5 15/64) 228 (8 31/32) 170 (6 3/4) 221 (8 45/64) 1 (4 31/64) 180 (7) 265 (10 7/16) Ø190 (7 1/2) 133 (5 15/64) 228 (8 31/32) 191 (7 1/2) 1 (4 31/64) 221 (8 45/64) 185 (7 9/32) 265 (10 7/16) 133 (5 15/64) 228 (8 31/32) 375 ( 49/64) 407 (16) 1700 / D 2000 / D Ø190 (7 1/2) 480 (18 29/32) 2300 / D 228 (8 31/32) 133 (5 15/64) 228 (8 31/32) 133 (5 15/64) 178 (7) 221 (8 45/64) 205 (8 3/32) 1 (4 31/64) 265 (10 7/16) 265 (10 7/16) 170 (6 3/4) 221 (8 45/64) 180 (7) 1 (4 31/64) Ø190 (7 1/2) Ø190 (7 1/2) (12 3/16) Hydro / D 3000 / D 520 (20 15/32) REGAL ITHOUT DRUM RIGHT CHAIN PIPE orking Chain eight Engine A max thickness Speed dimensions mt / , ,7 RE 90156/R / , ,4 RE 90157/R / , ,5 RE 90275/R / , ,5 RE 90276/R / / , ,5 RE 90448/R REGAL HYRO ITHOUT DRUM RIGHT CHAIN PIPE orking max thickness Chain Speed REGAL ITH DRUM RIGHT CHAIN PIPE / RE 90450/R orking Chain eight Engine A max thickness Speed dimensions mt / , ,1 RE 90158/R / , ,8 RE 90159/R / , RE 90277/R / , ,2 RE 90278/R / / , ,8 RE 90449/R REGAL HYRO ITH DRUM RIGHT CHAIN PIPE orking max thickness Chain Speed / ,3 RE 90451/R eight eight reba@rebamarine.com

INDLASSES REGAL REGAL INDLASS LEFT CHAIN PIPE RG5Y Base and chain pipe in stainless steel AISI 316 Available with right (see photo) or left chain pipe Manual free-fall system Safety chain stopper

5 (6 51/64) 265 (10 7/16) Ø190 (7 1/2) 133 (5 15/64) 228 (8 31/32) 191 (7 1/2) 1 (4 31/64) 221 (8 45/64) 185 (7 9/32) 265 (10 7/16) Ø190 (7 1/2) 133 (5 15/64) 228 (8 31/32) 375 ( 49/64) 1700 / D 480

15 INDLASSES REGAL REGAL INDLASS LEFT CHAIN PIPE RG5Y Base and chain pipe in stainless steel AISI 316 Available with right (see photo) or left chain pipe Manual free-fall system Safety chain stopper integrated IP67 watertight motor 162 (6 1/4) 1 (4 31/64) 221 (8 45/64) (6 51/64) 265 (10 7/16) Ø190 (7 1/2) 133 (5 15/64) 228 (8 31/32) 191 (7 1/2) 1 (4 31/64) 221 (8 45/64) 185 (7 9/32) 265 (10 7/16) Ø190 (7 1/2) 133 (5 15/64) 228 (8 31/32) 375 ( 49/64) 1700 / D 480 (18 29/32) 2000 / D 1 (4 31/64) 133 (5 15/64) 228 (8 31/32) 1 (4 31/64) 133 (5 15/64) 228 (8 31/32) 1 (4 31/64) 133 (5 15/64) 228 (8 31/32) AC 180 (7) 180 (7) 244 (9 39/64) 265 (10 7/16) Ø190 (7 1/2) 265 (10 7/16) Ø190 (7 1/2) 265 (10 7/16) Ø190 (7 1/2) 170 (6 3/4) 221 (8 45/64) (12 3/16) 170 (6 3/4) 221 (8 45/64) 407 (16) 158 (6 7/32) 221 (8 45/64) Hydro / D 2300 / D 480 (18 57/64) 3000 / D Engine A REGAL ITHOUT DRUM LEFT CHAIN PIPE orking max thickness Chain Speed () REGAL HYDRO ITHOUT DRUM LEFT CHAIN PIPE REGAL ITH DRUM LEFT CHAIN PIPE / , ,7 RE 90156/L / , ,4 RE 90157/L / , ,5 RE 90275/L / , ,5 RE 90276/L / / , ,5 RE 90448/L Engine A orking max orking max thickness Chain Speed thickness Chain Speed () / RE 90450/L / , ,1 RE 90158/L / , ,8 RE 90159/L / , RE 90277/L / , ,2 RE 90278/L / / , ,8 RE 90449/L REGAL HYDRO ITH DRUM LEFT CHAIN PIPE orking max thickness Chain Speed / , RE 90451/L eight eight eight eight - reba@rebamarine.com 289

INDLASSES ROY ROY INDLASS RY6 Base, gypsy and cover gypsy in stainless steel AISI 316 Integrated sensor and magnet for chain counter Mechanical safety band brake 288.

5 (11 23/64) 198 (7 51/64) 279 (10 63/64) 209 (8 15/64) Ø 267 (10 33/64) 174 (6 27/32) 273 (10 3/4) 590 (23 15/64) 590 (23 15/64) 3000 / 3000D 3500 / 3500D ROY ITHOUT DRUM orking Chain eight Engine A

16 INDLASSES ROY ROY INDLASS RY6 Base, gypsy and cover gypsy in stainless steel AISI 316 Integrated sensor and magnet for chain counter Mechanical safety band brake (11 23/64) 198 (7 51/64) 279 (10 63/64) 209 (8 15/64) Ø 267 (10 33/64) 174 (6 27/32) 273 (10 3/4) (11 23/64) 198 (7 51/64) 279 (10 63/64) 209 (8 15/64) Ø 267 (10 33/64) 174 (6 27/32) 273 (10 3/4) 590 (23 15/64) 590 (23 15/64) 3000 / 3000D 3500 / 3500D ROY ITHOUT DRUM orking Chain eight Engine A max thickness Speed dimensions mt / RE / RE ROY ITH DRUM orking Chain eight Engine A max thickness Speed dimensions mt / RE / RE reba@rebamarine.com

17 INDLASSES ROY 174 (6 27/32) (11 23/64) 198 (7 51/64) 273 (10 3/4) ROY INDLASS RY6AC Base, drum and gypsy cover in stainless steel AISI 316 Integrated sensor and magnet for chain counter Mechanical safety band brake 279 (10 63/64) (11 23/64) 198 (7 51/64) 174 (6 27/32) 273 (10 3/4) 279 (10 63/64) 209 (8 15/64) Ø 267 (10 33/64) 209 (8 15/64) Ø 267 (10 33/64) 590 (23 15/64) 4000 / 4000D 273 (10 3/4) (11 23/64) 174 (6 27/32) 198 (7 51/64) 279 (10 63/64) 209 (8 15/64) Ø 267 (10 33/64) 612 (24 3/32) 5500 / 5500D 406 (15 31/32) Hydro / D Engine ROY ITHOUT DRUM orking max ROY HYDRO ITHOUT DRUM ROY ITH DRUM thickness ROY HYDRO ITH DRUM Chain Speed () / / , RE / / , RE Engine orking max orking max thickness thickness Chain Speed Chain Speed () / RE / / , RE / / , RE orking max thickness Chain Speed / RE eight eight eight eight - reba@rebamarine.com 291

18 INDLASSES XROY INDLASSES XROY RIGHT XR7 - XR8 Stainless steel AISI 316 base, drum and gypsy cover Safety mechanical band brake Anodized alluminium gearbox XR7 Hydro XR8 Hydro Engine orking max XROY ITHOUT DRUM Drum diameter XROY HYDRO ITHOUT DRUM XROY ITH DRUM thickness XROY HYDRO ITH DRUM Chain Speed () / , , RE 90760/R / , , RE 90761/R / , , RE 90762/R Engine orking max Drum diameter thickness Drum diameter thickness MAX Chain Speed Chain Speed () / , RE 90763/R , , RE 90764/R / , , RE 90765/R / , , RE 90766/R / , , RE 90767/R Drum diameter thickness MAX Chain Speed / , RE 90768/R , , RE 90769/R eight eight eight eight reba@rebamarine.com

INDLASSES XROY INDLASSES XROY LEFT XR7 - XR8 Stainless steel AISI 316 base, drum and gypsy cover Safety mechanical band brake Anodized alluminium

HYDRO ITH DRUM Chain Speed () 4000 230/400 4000 2000 12,5--16 250 40-80 12,5 22-32 245 RE 90760/L 5500 230/400 4500 2000 19-20,5-22 300 40-80 12,5

thickness MAX Chain Speed Chain Speed () 210 50 3000 12/13--16 250 40-80 12,5 22-35 235 RE 90763/L 210 60 5000 19-20,5-22 250 40-80 12,5 32-50 385

90766/L 7000 230/400 5000 25000 19-20,5-22 300 40-80 12,5 32-50 450 RE 90767/L Drum diameter thickness MAX Chain Speed 210 50 3000 12/13--16 250

19 INDLASSES XROY INDLASSES XROY LEFT XR7 - XR8 Stainless steel AISI 316 base, drum and gypsy cover Safety mechanical band brake Anodized alluminium gearbox XR7 Hydro XR8 Hydro Engine orking max XROY ITHOUT DRUM Drum diameter XROY HYDRO ITHOUT DRUM XROY ITH DRUM thickness XROY HYDRO ITH DRUM Chain Speed () / , , RE 90760/L / , , RE 90761/L / , , RE 90762/L Engine orking max Drum diameter thickness Drum diameter thickness MAX Chain Speed Chain Speed () / , RE 90763/L , , RE 90764/L / , , RE 90765/L / , , RE 90766/L / , , RE 90767/L Drum diameter thickness MAX Chain Speed / , RE 90768/L , , RE 90769/L eight eight eight eight - reba@rebamarine.com 293

INDLASSES EAGLE INDLASSES E1-E3 Anodized aluminium base The vertical motor makes for extreme ease and speed of installation Manual free-fall

90046 500 12 90 630 250 6 20 40 26,3 6 9 9,30 RE 90047 700 12 90 1070 300 6-8 - 10 25 50 27,4 7 10 22,60 RE 91005 700 24 60 1070 370 6-8 - 10

91008 00 12 150 50 450 6-8 - 10 35 65 37,6 12 15 23,70 RE 91045 00 24 85 50 500 6-8 - 10 35 65 40,6 12 15 23,70 RE 91001 *8 gypsy comes as

Acciaio inox AISI 316 e bronzo cromato Sistema automatico di caduta libera dell anchor-rode Provvisto di dispositivo guida cima orking load ()

5-7 RE 90497 1200 12 420 28-30 19,2 5-7 RE 90498 1200 24 420 28-30 19,2 5-7 RE 90499 (*specify when ordering specify BALDER X or BALDER Y)

90482 BO ROLLER PTR model can be bow roller for an easier use where windlasses cannot be installed Specifically designed for blocking the

20 INDLASSES EAGLE INDLASSES E1-E3 Anodized aluminium base The vertical motor makes for extreme ease and speed of installation Manual free-fall system atertight motor IP67 A EAGLE ITH DRUM orking load () Chain* sizes thickness Chain Speed () , ,30 RE , ,30 RE , ,60 RE , ,60 RE , ,70 RE ,70 RE , ,70 RE , ,70 RE *8 gypsy comes as standard, other gypsies available (see the table) SALPA ANCORA BALDER X - BALDER Y Salpa ancora solo cima Massima flessibilità di montaggio Acciaio inox AISI 316 e bronzo cromato Sistema automatico di caduta libera dell anchor-rode Provvisto di dispositivo guida cima orking load () chain Speed () eight eight RE RE ,6 5-7 RE ,6 5-7 RE ,2 5-7 RE ,2 5-7 RE (*specify when ordering specify BALDER X or BALDER Y) ON-DECK PTR INDLASS Available as windlass or as bow roller in stainless steel AISI 316 and anodized aluminium IP67 motor 294 (11 37/64) 173 (6 13/16) 220 (8 43/64) Absorp. A load Chain Speed eight , RE , ,5 RE , ,2 RE BO ROLLER PTR model can be bow roller for an easier use where windlasses cannot be installed Specifically designed for blocking the anchor in a safe way, thanks to its particular system 220 ( /64) (8 43/64) 596 (23 29/64) 308 (12 9/64) 231 (9 7/64) 8 (5 8 53/64) (5 53/64) Bow roller in black anodized aluminium RE Bow roller in stainless steel AISI316 RE reba@rebamarine.com

watertight motor orking load GENIUS ITHOUT DRUM orking load GENIUS ITH DRUM GENIUS FF Absorp.

21 HORIZONTAL ON-DECK INDLASSES INDLASSES GENIUS GP2 Horizontal on-deck windlasses. Anodized alluminium in hard oxide base hite composite material base (GP2 500) Rope and chain on a single gypsy Integrated sensor and magnet for chain counter Supplied with pressure lever IP66 watertight motor orking load GENIUS ITHOUT DRUM orking load GENIUS ITH DRUM GENIUS FF Absorp. A chain Speed () thickness eight , RE , RE , ,2 6-9 RE , , RE , , RE orking load orking load Absorp. A chain Speed () thickness eight , RE , ,5 6-9 RE , , RE , , RE orking load orking load Absorp. A chain Speed () thickness eight , ,9 6-7 RE , ,9 6-9 RE , , RE , , RE reba@rebamarine.com 295

ON DECK INDLASSES HECTOR HECTOR INDLASSES HC3 On deck windlasses with integrated solenoids unit.

17/32) 284 (11 3/16) 250 (9 27/32) DB XBD HECTOR ONLY GYPSY 700/1000/1500 Mod A orking load () Chain* sizes Rope sizes HECTOR DRUM AND GYPSY chain Speed ( ) dimensions mt HC3 700 12 90 1100 300 8-10

39,6 10 13 23,90 RE 90239 HC3 1500 12 150 1500 450 8-10 9/16-5/8 37,5 12 15 24,00 RE 90240 HC3 1500 24 85 1500 550 8-10 9/16-5/8 40,0 12 15 24,00 RE 90241 Mod A orking load () Chain* sizes Rope sizes

22 ON DECK INDLASSES HECTOR HECTOR INDLASSES HC3 On deck windlasses with integrated solenoids unit. Base in anodized aluminium and jacket in composite material or in anodized aluminium Supplied with pressure level Emergency manual lift system Manual Free fall system 213 (8 3/8) 373 ( 11/16) 318 (12 17/32) 284 (11 3/16) 250 (9 27/32) DB XBD HECTOR ONLY GYPSY 700/1000/1500 Mod A orking load () Chain* sizes Rope sizes HECTOR DRUM AND GYPSY chain Speed ( ) dimensions mt HC /16-5/8 26, ,60 RE HC /16-5/8 29, ,60 RE HC /16-5/8 37, ,90 RE HC /16-5/8 39, ,90 RE HC /16-5/8 37, ,00 RE HC /16-5/8 40, ,00 RE Mod A orking load () Chain* sizes Rope sizes chain Speed ( ) dimensions mt HC3D /16-5/8 26, RE HC3D /16-5/8 29, RE HC3D /16-5/8 37, ,3 RE HC3D /16-5/8 39, ,3 RE HC3D /16-5/8 37, ,4 RE HC3D /16-5/8 40, ,4 RE *All models come standard with the barbotin for an 8 chain, On request the barbotins can be mounted in the table. On request the bell can be provided on barbotin. eight eight reba@rebamarine.com

ON DECK INDLASSES HEROES ON DECK INDLASSES HEROES HR5 Horizontal on deck windlasses DC motor from 1700 to 3500 Painted alluminium base (RAL 9010) ith and without drum Integrated solenoids Emergency

Chain* sizes chain Speed ( ) dimensions mt 1700 12 180 1700 500 10-12/13-15.

23 ON DECK INDLASSES HEROES ON DECK INDLASSES HEROES HR5 Horizontal on deck windlasses DC motor from 1700 to 3500 Painted alluminium base (RAL 9010) ith and without drum Integrated solenoids Emergency ratchet-operated manual lift system Safety mechanical band brake IP66 protected motor 444 (17 31/64) 355 (13 25/39) 297 (11 11/16) 290 (11 27/64) 541 (21 19/64) HEROES ITHOUT DRUM A orking load () Chain* sizes chain Speed ( ) dimensions mt / RE /13-16, RE /13-23, RE /13-19, RE A HEROES ITH DRUM orking load () Chain* sizes chain Speed ( ) dimensions mt / RE /13-16, RE /13-23, RE /13-19, RE reba@rebamarine.com 297

CAPSTANS TOTEM TOTEM CAPSTANS TM3 Totem Models are realized ith base and drum

efficiency ( 30-40% compared to equivalent Traditional gearboxes) 5/16) 203

dimensions mt 500 12 40 620 200 80 20 40 8-12 8,10 RE 90218 800 12 80 820 290

TOTEM G CAPSTANS Capstans with chromed-plated bronze base and anodized

The Totem g range is equipped with an epicyclical gearbox, which provides much

orking load () Drum diameter thickness Speed ( ) 500 12 40 620 200 58 20 40

24 CAPSTANS TOTEM TOTEM CAPSTANS TM3 Totem Models are realized ith base and drum in chromed bronze Provided with epicyclical gearbox That provides much higher efficiency ( 30-40% compared to equivalent Traditional gearboxes) 5/16) 203 (8) 1 (4 1/2) Ø 105 (4 5/32) Ø 160 (6 A orking load () Drum diameter thickness dimensions mt ,10 RE ,10 RE ,10 RE eight TOTEM G CAPSTANS Capstans with chromed-plated bronze base and anodized aluminium drum. The Totem g range is equipped with an epicyclical gearbox, which provides much higher efficiency (30-40% compared to equivalent traditional gearboxes) A orking load () Drum diameter thickness Speed ( ) ,4 9,50 RE ,8 9,50 RE ,8 9,50 RE eight reba@rebamarine.com

CAPSTANS TUMBLER 103 (4 3 /64) TB2 500 TUMBLER CAPSTAN TB2-TB3 Base and drum in stainless steel 316 IP67 motor 1 (5 35 /64) 82

6 (5 55 /64) Ø 130 (5 1 /8) Drum ø 130. 330 (13) TB3 113 (4 29 /64) 8.

660 200 105 25-50 29 6-9 7,6 RE 90048 500 24 40 660 220 105 25-50 29 6-9 7,6 RE 90049 700 12 90 850 250 130 25-50 21 7-10 15,4

25 CAPSTANS TUMBLER 103 (4 3 /64) TB2 500 TUMBLER CAPSTAN TB2-TB3 Base and drum in stainless steel 316 IP67 motor 1 (5 35 /64) 82 (3 15/64) 119 (4 11/16) Ø 105 (4 9 /64) 244 (9 39 /64) Drum ø 105. TB3 113 (4 29 /64) (5 55 /64) Ø 130 (5 1 /8) Drum ø (13) TB3 113 (4 29 /64) 8.6 (5 55 /64) 1 (5 35 /64) Ø 130 (5 1 /8) 1000 A orking load () Drum diameter thickness Speed () dimensions mt eight ,6 RE ,6 RE ,4 RE ,4 RE ,8 RE ,8 RE ( 11 /64) - reba@rebamarine.com 299

CAPSTANS TUMBLER TUMBLER CAPSTAN TB4-TB5-TB6 Base and drum in stainless steel 316 IP67 motor Drum ø 170. Drum ø 2.

4 (6 5/16) 170 (6 21/64) Ø 170 (6 21/64) 180 (7 3/32) 135.3 (5 21/64) 1000 L / 1500 1700 2000 407 (16 1/64) 178 (7) Ø 200 (7 7/8) 205 (8 5/64) 160.

1000 24 80 1000 450 2 30-50 26-18 17,3 RE 90055 1500 12 155 1100 450 2 30-50 25 16-22 21,2 RE 90056 1500 24 85 1100 500 2 30-50 26 16-22 21,2 RE 90057 1700

26 CAPSTANS TUMBLER TUMBLER CAPSTAN TB4-TB5-TB6 Base and drum in stainless steel 316 IP67 motor Drum ø 170. Drum ø (6 3/8) Ø 2 (5 19/32) 167 (6 37/64) 120 (4 23 /32) 375 ( 49/64) 191 (7 33/64) Ø 200 (7 7/8) 185 (7 9/32) (6 5/16) 170 (6 21/64) Ø 170 (6 21/64) 180 (7 3/32) (5 21/64) 1000 L / (16 1/64) 178 (7) Ø 200 (7 7/8) 205 (8 5/64) (6 5/16) 480 (18 57/64) 520 (20 15/32) A orking load () Drum diameter thickness Speed () eight ,3 RE ,3 RE ,2 RE ,2 RE , RE , RE RE , ,7 RE reba@rebamarine.com

CAPSTANS TUMBLER TUMBLER CAPSTANS TB5AC-TB6AC TB7AC-TB8AC TB5HYDRO TB6HYDRO TB7HYDRO TB8HYDRO Base and drum in stainless steel 316 IP67 motor Drum ø 300 Drum ø 200 135.

4 (6 5/16) 4000 170 (6 3/4) 185 (9 9/32) Ø 200 (7 7/8) Ø 200 (7 7/8) 180 (7) 253 (9 61/64) 309.

30-60 15 30-36 83 RE 90789 4000 230/400-3000 1000 200 30-70 15 30-36 51,7 RE 90790 4000 230/400-3000 1000 250 30-60 15 32-38 100 RE 90791 5500 230/400-4500 2000 300 30-60 12,5

27 CAPSTANS TUMBLER TUMBLER CAPSTANS TB5AC-TB6AC TB7AC-TB8AC TB5HYDRO TB6HYDRO TB7HYDRO TB8HYDRO Base and drum in stainless steel 316 IP67 motor Drum ø 300 Drum ø (5 21/64) (6 7/32) 244 (9 39/64) Ø 170 (6 21/64) 480 (18 57/64) (6 5/16) Hydro (6 5/16) (6 3/4) 185 (9 9/32) Ø 200 (7 7/8) Ø 200 (7 7/8) 180 (7) 253 (9 61/64) (12 3/16) 554 (21 53/64) A orking load () TUMBLER HYDRO Drum diameter thickness Speed () / ,7 RE / RE / ,7 RE / RE / , RE / , RE Drum diameter thickness Chain Speed , RE ,2 RE , RE RE eight eight - reba@rebamarine.com 301

HORIZONTAL INDLASSES EAGLE PTG ON-DECK INDLASS This model is available in the windlass version or in a tender-recovery version In stainless steel AISI 316 And anodized aluminium IP67 watertight

750 250-21,5 8-12 10,2 RE 90493 THOR CAPSTAN TH Capstans for tender Aluminium base and drum in anodized aluminium in hard oxide.

6 (5 27/32) Ø 190 (7 1/2) 1 (5 9/16) Ø 190 (7 1/2) 330 (13) 340 (13 3/8) 385 (15 1/8) A load thickness Chain Speed eight 700 12 90 850 250 25-50 27,4,2 RE 90485 700 24 55 850 300 25-50 26,4,2 RE

28 HORIZONTAL INDLASSES EAGLE PTG ON-DECK INDLASS This model is available in the windlass version or in a tender-recovery version In stainless steel AISI 316 And anodized aluminium IP67 watertight engine 294 (11 37/64) 173 (6 13/16) 220 (8 43/64) A orking load () Drum diameter Speed ( ) dimension m eight , RE , ,5 RE , ,2 RE THOR CAPSTAN TH Capstans for tender Aluminium base and drum in anodized aluminium in hard oxide. IP67 motor 6 (4 25/32) 1 (5 9/16) (4 25/32) 1 (5 9/16) (4 25/32) 8.6 (5 27/32) Ø 190 (7 1/2) 179 (7) 8.6 (5 27/32) Ø 190 (7 1/2) 1 (5 9/16) Ø 190 (7 1/2) 330 (13) 340 (13 3/8) 385 (15 1/8) A load thickness Chain Speed eight ,4,2 RE ,4,2 RE ,6 15,5 RE ,9 15,5 RE ,5 RE ,7 18,5 RE INCHES ITH ROLLER FOR SLING THG Base and drum in anodized aluminium IP67 motor (1000/1500 ) IP66 motor (500 ) A load thickness Chain Speed eight max 50 5,5,0 RE max 50 5,8,0 RE max 50 4,2 18,9 RE max 50 4,8 18,9 RE max 50 5,5 18,9 RE max 50 6,8 18,9 RE reba@rebamarine.com

INCHES AND ANCHORS CAPSTANS ITH DRUM FOR ROPE-CHAIN STRESSFREE Capstans with drum for rope-chain AISI 316 stainless steel base and drum IP67 watertight motor Anodized Aluminium gearbox load Drum

MINI EXTRA IDE 500 FF RE 90804 00 12 250 300 22,8 6-7 SF MIDI 00 RE 90805 00 12 250 300 24,8 6-7 SF MIDI 00 FF RE 90806 00 12 275 300 34 7 + SF MAXI 00 RE 90807 00 12 275 300 35,4 7 + SF MAXI 00 FF

galvanized eight Recoended chain dimension m Dimensions A-B-C-D-E galvanized steel 4 6-7 6-8 240-540-10-430-245 RE 90820 7,5 7-8 7-10 300-645-12-485-260 RE 90821 10 8 8-11 310-700-12-510-280 RE 90822

29 INCHES AND ANCHORS CAPSTANS ITH DRUM FOR ROPE-CHAIN STRESSFREE Capstans with drum for rope-chain AISI 316 stainless steel base and drum IP67 watertight motor Anodized Aluminium gearbox load Drum diameter eight dimension m ,5 4-6 SF MINI 500 RE ,3 4-6 SF MINI 500 FF RE SF MINI EXTRA IDE 500 RE ,8 4-6 SF MINI EXTRA IDE 500 FF RE ,8 6-7 SF MIDI 00 RE ,8 6-7 SF MIDI 00 FF RE SF MAXI 00 RE ,4 7 + SF MAXI 00 FF RE SF MIGHTY 1700 RE ,3 9 + SF MIGHTY 1700 FF RE Series PLO-SHAPED ARM ANCHORS Available in AISI 316 Stainless steel or Hot dipped galvanized eight Recoended chain dimension m Dimensions A-B-C-D-E galvanized steel RE , RE RE RE RE RE RE CLA-SHAPED ARM ANCHORS AISI 316 Stainless steel eight Recoended chain dimension m Dimensions A-B-C-D-E RE RE RE reba@rebamarine.com 303

INDLASSES ACCESSORIES MULTIPURPOSE ATERTIGHT HANDHELD REMOTE CONTROL Designed to for remote operation of on-board electrically operated equipment: cranes, gangways, sea ladder etc.

support bracket for stowing after use N functions Integrated lamp Dimensions Contacts A Cable Lenght 2 NO 165x62,20x49,4 4 4,2 mt RE 90083 2 LED 165x62,20x49,4 4 4,2 mt RE 90083/LED 4

4,2 mt RE 90087 8 LED 165x62,20x49,4 4 4,2 mt RE 90087/LED LED NES integrated LED Flashlight CHAIN COUNTER FOR PANELS Thanks to the introduction of a new microprocessor, it s possible

display contrast compensation according to environmental temperature.

Up alarm function Chain speed displayed voltage displayed Equipped with clock/calendar Depth of chain lowered in shower in metres or feet 8 different display contrast levels can be set

CHAIN COUNTER FOR ANCHOR CHC 1203 is a complete and reliable instrument to manoeuvre from a distance the windlass and controlling the length of chain lowered through the LCD display

Information in 5 different languages. Chain speed. voltage. Depth of chain lowered shown in metres or feet. General features. Graphic LCD display; can be easily read from any angle.

30 INDLASSES ACCESSORIES MULTIPURPOSE ATERTIGHT HANDHELD REMOTE CONTROL Designed to for remote operation of on-board electrically operated equipment: cranes, gangways, sea ladder etc.. Constructed with rubber insert to ensure high strength, long durability, perfect watertightness and a secure grip Supplied with 4,2 extensible cable, watertight plug and Socket and a support bracket for stowing after use N functions Integrated lamp Dimensions Contacts A Cable Lenght 2 NO 165x62,20x49,4 4 4,2 mt RE LED 165x62,20x49,4 4 4,2 mt RE 90083/LED 4 NO 165x62,20x49,4 4 4,2 mt RE LED 165x62,20x49,4 4 4,2 mt RE 90084/LED 6 NO 165x62,20x49,4 4 4,2 mt RE LED 165x62,20x49,4 4 4,2 mt RE 90085/LED 8 NO 165x62,20x49,4 4 4,2 mt RE LED 165x62,20x49,4 4 4,2 mt RE 90087/LED LED NES integrated LED Flashlight CHAIN COUNTER FOR PANELS Thanks to the introduction of a new microprocessor, it s possible to program the chain counter for different use on any windlasses Graphic LCD display screen easily to read at various angles Backlight display screen with 8 brightness levels Automatic display contrast compensation according to environmental temperature. Protection degree IP67 Supplied with 4,2mt extensible cable and A neat stowage bracket Information displayed in 5 different languages Automatic lowering function. Up alarm function Chain speed displayed voltage displayed Equipped with clock/calendar Depth of chain lowered in shower in metres or feet 8 different display contrast levels can be set Backlight illuminated function keys CAN BUS device for data transmission supply Integrated lamp Dimensions Absorbtion Cable Lenght 12/24 dc LED 165x62,20x49,4 35 ma 4,2 mt RE CHAIN COUNTER FOR ANCHOR CHC 1203 is a complete and reliable instrument to manoeuvre from a distance the windlass and controlling the length of chain lowered through the LCD display graphic. Operating functions. Automatic lowering function. Up alarm function. Locked keys function. Ability to control free fall windlass feature. Displayed. Information in 5 different languages. Chain speed. voltage. Depth of chain lowered shown in metres or feet. General features. Graphic LCD display; can be easily read from any angle. Backlit display screen with 8 brightness levels. 8 different display contrast levels can be set. Automatic display contrast compensation Backlit function keys. CAN bus interface for data transfer. Model supply Dimensions Absorbtion CHC dc 102x102x33, RE Kit for inlet installation RE 90089/KIT reba@rebamarine.com

INDLASSES ACCESSORIES POCKET TRANSMITTER N channel Frequency Mhz supply eight (g) Dimension () Operative temp.

Frequency Mhz supply eight (g) Dimension () Operative temp.

135 115x60,6x35,4-15 / +70 FSK RE 90094 RECEIERS The receiver can be prograed to accept the signal of several transmitter with different s.

RECEIERS 20A - 25 TRANSMITTERS STARE N channel Frequency supply eight (g) Dimension () 2 434,420 10,5-31 15 25 RE 91050 4 434,420 10,5-31 15 25 RE 91051 6 434,420 10,5-31 15 25 RE 91052 8 434,420

77,2x77,2x30 RE 91010 INDLASSES FOOT SITCHES ith safety cover to prevent accidental push-button operation.

31 INDLASSES ACCESSORIES POCKET TRANSMITTER N channel Frequency Mhz supply eight (g) Dimension () Operative temp. C Modulation 2 434,420 Battery CR Lithium 34 61x47,5x23-15 / +70 FSK RE ,420 Battery CR Lithium 34 61x47,5x23-15 / +70 FSK RE ATERTIGHT ERGONOMIC TRANSMITTER N channel Frequency Mhz supply eight (g) Dimension () Operative temp. C Modulation 2 434,420 3 alkaline batteries AAA x60,6x35,2-15 / +70 FSK RE ,420 3 alkaline batteries AAA x60,6x35,3-15 / +70 FSK RE ,420 3 alkaline batteries AAA x60,6x35,4-15 / +70 FSK RE RECEIERS The receiver can be prograed to accept the signal of several transmitter with different s. It is also possible to operate with one transmitter and several receivers, or activate a single receiver with several transmitter, thus allowing an infinite number of combinations RADIO REMOTE RECEIERS 20A - 25 TRANSMITTERS STARE N channel Frequency supply eight (g) Dimension () 2 434,420 10, RE ,420 10, RE ,420 10, RE ,420 10, RE ,420 10, RE ,420 10, RE ANTENNAS FOR RECEIERS QUICK RE CINDLASSES CONTROL BOARD Dimensions 50x87x28 RE Dimensions 77,2x77,2x30 RE INDLASSES FOOT SITCHES ith safety cover to prevent accidental push-button operation. Dimensions 85x77x17 Black anchor lowering switch RE Black anchor lifting switch RE hite anchor lowering switch RE 90080/ hite anchor lifting switch RE 90081/ ith safety cover to prevent accidental push-button operation. Dimensions 86x77x20 Black anchor lowering switch RE Black anchor lifting switch RE hite anchor lowering switch RE 90092/ hite anchor lifting switch RE 90093/ INDLASSES FOOT SITCHES ith safety cover to prevent accidental push-button operation. Dimensions 124,4x103,5x20,5 Adjustable UP/DON Indicator hite switch Stainless steel switch RE90097 RE reba@rebamarine.com 305

SOLENOIDS HYDRAULIC MAGNETIC CIRCUIT BREAKERS Offer protection when using direct currents.

supply Poles Amperage (A) Dimension () 12/24 1 40 A 50x87x67 RE 91055 12/24 1 50 A 50x87x67 RE 91056 12/24 1 60 A 50x87x67 RE 90077 12/24 1 80 A 50x87x67 RE 90078

windlasses) Continuos rating DC Model Dimension Coil coands Stud terminal Coil Case materials 150 A 12 T6215/12 57 x 55 x 83 fast-on M8 Isolated Zinc-steel RE 90069

It is able to operate electric motors such as windlasses, gangways and capstans.

threads eight gr T6315-12 12 48 dc 2500 800 A 150 A IP 66 3 850 gr RE 90061 T6315-24 24 48 dc 3500 800 A 150 A IP 66 3 980 gr RE 90062 SOLENOID UNITS atertight units

threads eight gr T6415-12 12 48 dc 2500 800 A 150 A IP 66 2 o 4 850 gr RE 90065 T6415-24 24 48 dc 3500 800 A 150 A IP 66 2 o 4 980 gr RE 90066 UNITS FOR ALTERNATING

32 SOLENOIDS HYDRAULIC MAGNETIC CIRCUIT BREAKERS Offer protection when using direct currents. In over current situation they will trip, break the circuit and protect the equipment, they may be reset manually. supply Poles Amperage (A) Dimension () 12/ A 50x87x67 RE / A 50x87x67 RE / A 50x87x67 RE / A 50x87x67 RE / A 50x87x67 RE / A 79,2x99,2x71 RE / A 79,2x99,2x71 RE SOLENOIDS Designed to operate electric motors (such as windlasses) Continuos rating DC Model Dimension Coil coands Stud terminal Coil Case materials 150 A 12 T6215/12 57 x 55 x 83 fast-on M8 Isolated Zinc-steel RE A 24 T6215/24 57 x 55 x 97 fast-on M8 Isolated Zinc-steel RE SOLENOID UNITS atertight units with two cabled solenoid. It is able to operate electric motors such as windlasses, gangways and capstans. Coil external connection with fast-on Model Skein voltage MAX voltage MAX power engine Interruption power 5ms Intermittance current 5ms Protection grade IP Engine n threads eight gr T dc A 150 A IP gr RE T dc A 150 A IP gr RE SOLENOID UNITS atertight units with two cabled reversion solenoid. It is able to operate electric motors such as windlasses, gangways and capstans. Coil external connection with fast-on Model Skein voltage MAX voltage MAX power engine Interruption power 5ms Intermittance current 5ms Protection grade IP Engine n threads eight gr T dc A 150 A IP 66 2 o gr RE T dc A 150 A IP 66 2 o gr RE UNITS FOR ALTERNATING CURRENT (AC) ELECTRICAL CONNECTIONS Device to operate windlass and winches using remote controls. Protection: IP56 motor power voltage Dimensions x185x3 RE x185x3 RE x185x3 RE x185x3 RE x185x3 RE reba@rebamarine.com

CALIBRATED CHAIN CALIBRATED AISI 316 STAILESS STEEL CHAIN Suitable for the perfect functioning of Quick windlasses Material Chain Type Pitch ( P ) Height ( H ) Tolerance Lenght m Stainless steel Ø 6

Stainless steel Ø 13 36 44 ± 0,5 on request RE 90231 Stainless steel Ø 41 47 ± 0,6 on request RE 90232 CALIBRATED HOT DIPPED GALANISED CHAIN Suitable for the perfect functioning of Quick windlasses

galvanised Ø 8 24 26 ± 0,3 on request RE 90255 Hot dipped galvanised Ø 10 ISO 30 35 ± 0,4 on request RE 90256 Hot dipped galvanised Ø 12 ISO 36 40 ± 0,5 on request RE 90257 Hot dipped galvanised Ø 13

Type Pitch ( P ) Height ( H ) Lenght m Hot dipped galvanised 12,5 STUDLINK 50 45 on request RE 90221 Hot dipped galvanised 16 STUDLINK 64 58 on request RE 90222 Hot dipped galvanised 17,5 STUDLINK 70

33 CALIBRATED CHAIN CALIBRATED AISI 316 STAILESS STEEL CHAIN Suitable for the perfect functioning of Quick windlasses Material Chain Type Pitch ( P ) Height ( H ) Tolerance Lenght m Stainless steel Ø 6 18,5 20 ± 0,2 on request RE Stainless steel Ø ± 0,3 on request RE Stainless steel Ø 10 ISO ± 0,4 on request RE Stainless steel Ø 12 ISO ± 0,5 on request RE Stainless steel Ø ± 0,5 on request RE Stainless steel Ø ± 0,6 on request RE CALIBRATED HOT DIPPED GALANISED CHAIN Suitable for the perfect functioning of Quick windlasses Material Chain Type Pitch ( P ) Height ( H ) Tolerance Lenght m Hot dipped galvanised Ø 6 18,5 20 ± 0,2 on request RE Hot dipped galvanised Ø ± 0,3 on request RE Hot dipped galvanised Ø ± 0,3 on request RE Hot dipped galvanised Ø 10 ISO ± 0,4 on request RE Hot dipped galvanised Ø 12 ISO ± 0,5 on request RE Hot dipped galvanised Ø ± 0,5 on request RE Hot dipped galvanised Ø ± 0,6 on request RE HOT DIPPED GALANISED CHAIN ITH CROSS Suitable for the perfect functioning of Quick windlasses Material Chain Type Pitch ( P ) Height ( H ) Lenght m Hot dipped galvanised 12,5 STUDLINK on request RE Hot dipped galvanised 16 STUDLINK on request RE Hot dipped galvanised 17,5 STUDLINK on request RE Hot dipped galvanised 19 STUDLINK on request RE Hot dipped galvanised 20,5 STUDLINK on request RE Hot dipped galvanised 22 STUDLINK on request RE Hot dipped galvanised 24 STUDLINK on request RE Hot dipped galvanised 26 STUDLINK on request RE ANCHOR-RODE SLIM SPLICE An anchor rode is the connection system between anchor and the boat and its. Sturdiness during mooring is undoubtedly essential. The critical point of the rope and chain combination is the joint, In Quick s slim splice, the splice is much slier and more tapered, preventing the Jaing which often occurs on the gypsy, during changeover from rope to chain. Quick s slim splice consists of a calibrated chain and a top quality 3-strand polyester. Rope, to guarantee optimum strength and life. Model Size chain Lenght chain Type Rope inc Lenght rope Packag. Slim Splice 6 (10-40) Ø 6 10 m 12,7 ½ 40 m Bucket RE Slim Splice 6 (10-61) Ø 6 10 m 12,7 ½ 61 m Bucket RE Slim Splice 6 (20-100) Ø 6 20 m 12,7 ½ 100 m Bucket RE Slim Splice 7 (6,1-30) Ø 7 6,1 m 12,7 ½ 30 m Bucket RE Slim Splice 8 (7,6-61) Ø 8 7,6 m 15,9 5/8 61 m Bucket RE Slim Splice 8 (7,6-30) Ø 8 7,6 m,3 9/16 30 m Bucket RE Slim Splice 8 (7,6-61) Ø 8 7,6 m,3 9/16 61 m Bucket RE Slim Splice 8 (10-61) Ø 8 10 m,3 9/16 61 m Bucket RE Slim Splice 8 (20-100) Ø 8 20 m,3 9/ m Bucket RE Slim Splice 10 (10-30) Ø m ISO 15,9 5/8 30 m Bucket RE Slim Splice 10 (10-50) Ø m ISO 15,9 5/8 50 m Bucket RE Slim Splice 10 (10-61) Ø m ISO 15,9 5/8 61 m Bucket RE Slim Splice 10 (20-100) Ø m ISO 15,9 5/8 100 m Bucket RE reba@rebamarine.com 307

anchor winches mini genius

Horizontal Anchor Winch Mini Genius 250 anchor winches mini genius Quicks appropriately named Genius series of horizontal windlass are the epitome of Italian elegance and ingenuity working in perfect synergy.