General Specifications. Model 92 ECCENTRIC ROTARY PLUG VALVES FEATURES. Valve Style and Specifications. Movement of the plug. 92 Style No.

Transcription

1 General Specifications Bulletin No. MCE-B B Model 9 ECCENTRIC ROTARY PLUG VALVES FEATURES Eccentric Plug does not touch to the Seat-ring until at the fully closed position Port is reducible by changing retainer only, without changing Plug and Seat Downsizing actuators good controllability with low driving torque Light weight Compactness Valve actionda or RAis convertible without changing/adding parts Easy installation and maintenance Large Cv High rangeability00 Wide operating temp.range00 00 No pit on inner surface of the body, less adhesion, suitable to Slurry and/or Fibre containing fluid control service applications. Positive shut-off performance Superior controllability Wide service applicationceramics trim type is available as option Typical Applications Steel IndustryCooling water, COG control Smoke extraction desulphurizationfor slurry contained liquid Petroleum refinery Drainage Construction of Full Port Visible Experimental Photograph Movement of the plug 9 Style No. Valve Style and Specifications A Standard Gyroll CT Ceramic Trim Gyroll CS Body Ceramics Sprayed Gyroll Options

2 . SPECIFICATIONS Actuator Valve Body Valve Characteristic and Performance Allowable Options Valve Model Valve Model No Body Type Spring return diaphragm actuator operated Eccentric plug valve 99A, PM9-A 9 Pressure Rating JIS0, 0K ASME/JPI Class 0, 00 End Connection RF, FF, RJ Body Material WCB, CF, CFM, CFM Plug Material CFM, CFM See page Bonnet Type Body Integrated type Gland Type Bolted Grand Packing Gasket Guiding Plug Action Seat Valve Characteristics Actuator Actuator size Spring Range kpakgf/cm G Supply Air Pressure kpakgf/cm G. Rotary Angle 0 Air Piping Connection Rc/ Ambient temperature Painting Color Control Mode Valve Action Available Max. Pressure Available Temperature Braided packing, Molded packing Serrated gasket Inner guide Plug Closed clockwise Metal seat, Resilient seat Positioner cam characterized Equal Percentage characeristic is available Model 900 Spring return diaphragm actuator to 0. to.0 Allowable Differential Press. See Page Rated Cv Value See Page Flow Characteristics See Page 7 Range-abilityCv Ratio Seat Leakage Rate Action Accuracy Metal Seat Resin Seat Hysteresis Error with Positioner Linearity with Positioner Actuator Accessories Others mm inch 0 0 0HP 0HP 00HP 00H 00HP BS- 0 to 0 0 to Direct 0. to.0. to.0action to 0 Reverse 0. to.action 0 0 0, 00 Notes Manufactured and mounted as options according to customers request. Double acting cylinder actuator is applicable on request. 00 Model 00 Spring type single acting cylinder operated , 90 Rc/ Rc/ , 0 00 Silver Throttling control, On-off Direct actionair-to close, Reverse actionair-to open Pressure limit shall conform to the standard of material & pressure temprature rating Metal seat 00 00,Resin seat Opening ANSI/FCI Class 0.0% of rated Cv Tight Shut OffT.S.O. 0.00% of rated Cv ANSI/FCI Class applicable for body size mm or more 90 to 0.9 to. 0 Direct Action 0 to 0. to. 0 Reverse Action 00 to 0. to. 90 ANSI/FCI Class mm bubble/min, mm bubble/min Model PM00 : Max. %F.S. Model 900/0 : Max. %F.S. Model PM00 : Max. %F.S. Model 900/0 : Max. %F.S. Air exposure bolt & nut S.S., Handwheel, Travel stopone side Pneumatic positionerpa9a, Electro-pneumatic positionerea90ac, EA9AC, EA0S, Air filter regulatormr0. Limit switch, Solenoide valve, and Others. The high pressure gas safety law certification, Jacketedfull, semi, Oring-guide, Resin-guide, Water free, Oil free, Specified painting color BS- BS- BS- BS-

3 . CONSTRUCTIONS Valve Body Model 9 is designed to control by expanding or reducing flow path area by rotating semi-spherical plug with seatring bore. No Reduced Port Part Name Body Plug Seat-ring Retainer Shaft Guide bushing Guide post Guide collar Bottom cover Spacer-ring Stopper-ring Plug pin Gland bushing Gland flange Split-ring Gasket Grand packing Grand bolt Bottom bolt Gland nut Bottom nut Port is reduced by retainer bore, Plug/Seat-ring change is not required to reduce port. Note When valve size is 0 mm or smaller, no guide post, bottom cover, gasket and bottom bolt, bottom nut used. Size mm 0mm in. in. Size mm 0mm in. in. Resin Seat Seat-ring Special filler contained PTFEResin seat Retainer Plug head Retainer for reduced port

4 . MAIN PARTS MATERIALS Typical Combination of Materials Metal Seat Body Material Process Temp. Range Plug Seat-ring Metal seat Guide Bushing Guide Collar Shaft Guide Post WCB CF CFM CMM 0 to to 0 00 to to to to 00 SCSA CoCr Alloy Seat SCSA CoCr Alloy Seat SUS SUS CoCr Alloy Seat SUS SUS CoCr Alloy Seat SUSL SUSL CoCr Alloy Seat SUS CoCr Alloy SUSL CoCr Alloy SUS SUSL Resin Seat Body Material Process Temp. Rang Plug Seat-ring Metal seat Guide Bushing Guide Collar Shaft Guide Post WCB CF CFM CFM 0 to SCSA SCSA T#900-SCCF SUS CoCr Alloy SUSL CoCr Alloy SUS SUSL Selection table of Metal seatcocr Alloy Resin seat Selection of Metal seat Hardening treatment classification of plug seat-ring to comply with fluid conditions. Class A B C Part Name Plug Seat-ring CoCr Alloy Seat N/A CoCr Alloy Seat CoCr Alloy Seat CoCr Alloy face CoCr Alloy Seat Notes Class C is for Incipient Cavitations or Flashing Service. Different type Seat will be applied to Cavitations or Slurry Service. In case of On-off or Tight Shut Off service, class B should be selected even through applicable Pressure and Temperature Range is within class A. Gas or Superheated steam Liquid or Saturated steam Selection of Resin seat Notes When, corrosion resistant trim materials are selected, Resin seat is recommended. For Oxygen service or Colouring free service, seat material T900-G0 is recommended. Such case, allowable temperature range is 0 to. SUS PTFE T900-SCCF

5 . ALLOWABLE DIFFERNTIAL PRESSURE Model 99 Unit : MPakgf/cm Actuator size Notes Regardless of port sizefull port or reduced port 0HP 0HP 00HP 00H 00HP and seat typemetal seat or resin seat, the left table mminch is applicable but allowable max. pressure of resin seat is restricted as shown in page..90 Multiply /. to the figures in the table to find allowable shut-off pressres for T.S.O.Tight Shut-off application with metal seat. Multiply /. to the figures in the table to find allowable shut-off pressure for Model 9-CT and 9-CS type Spring range for actuator size 00 HP is 0-kPaG kgf/cm Gfor direct action and -0kPaG 0.-.kgf/cm Gfor reverse action Select Model PM9 in case of 90 degree of rotary angle Model PM9 Unit : MPakgf/cm Shaft Material SUS SUS0 Actuator size mminch BS- BS- BS- BS- BS- BS- BS- BS Notes Regardless of rotary angle0 or 90 port sizefull port or reduced portand seat typemetal seat or resin seatthe above table is applicable but allowable max. pressure of resin seat is restricted as shown in page. Multiply /. to the figures in the table to find allowable shut-off pressure for T.S.O.Tight Shut-offapplication with metal seat. Multiply /. to the figures in the table to find allowable shut-off pressure for Model 9-CT and 9-CS type. SUS0 will be applied in case required shut-off pressure is more than the capacity of standard shaft material.. FLOW CHARACTERISTICS Rated Cv Value mminch Body Port size Full Port mm 0mm 0mm 00mm 0mm 00mm mm 0mm 00mm 00mm 0mm 0mm mm mm mm mm 00mm 00mm 0mm 0mm Cv Notes: Reduced port is available only for range in above table. Reduced Port 0 Port 0 Port Body Port size Cv Cv Body Port size mm 0. 9 mm 0. 0mm mm 0.. 0mm 0. 0mm 0. mm mm mm mm mm mm 0. 0 mm mm mm mm mm mm mm mm

6 Flow Characteristics Full PortRotary Angle 0 00 inch Body Sizemm / Valve Opening % PortRotary Angle 0 00 inch Body Sizemm 0 Cv Value / Valve Opening % PortRotary Angle 0 00 inch Body Sizemm 0 Cv Value / Valve Opening Cv Value Notes: Colored zones are appropriate ranges for controlmodulatingservice

7 Full PortRotary Angle inch Body Sizemm Valve Opening Cv Value 0% PortRotary Angle inch Body Sizemm Valve Opening Cv Value 0% PortRotary Angle 90 inch Body Sizemm Valve Opening Cv Value Notes: Colored zones are appropriate ranges for controlmodulatingservice.

8 . DIMENSIONS & WEIGHTS Model 99 Main dimensions and weights Table below shows for mounting orientation R-. "X" shows the dimension when Positioner has mounted. "LT" shows the dimension when Hand Wheel has mounted. The space for maintenance mminch F JIS0K, 0K ASME 0, E Actuator size 0 0HP 0 0 0HP HP 0HP 0 0 0HP 0HP HP 0HP 00HP 0HP 00HP 00HP HP 00HP 00HP HP 00HP 00HP HP 00 D L LT J C X P Notes"X" is the dimension to have mounted Motoyama EA-9AC Positioner. This dimension will be changed to have mounted other type of Positioners. Approx. Weights shows the weight of valve assembly without Hand Wheel. Mounting orientations Several combination of Valve Body and Actuator is available as follows. It is also available to mount Actuator horizontal. D- or R- is our standard shipping orientation unless otherwise specified Approx Weightskg 0K K Direct Action D- Standard D- D- D- Reverse Action R- Standard R- R- R- D-H D-H D-H D-H R-H R-H R-H R-H Legend : Flow direction

9 Model PM9 Main dimensions and weights Table below shows for mounting orientation R-. "X" shows the dimension when Positioner has mounted. "LT" shows the dimension when Hand Wheel has mounted. Flow Direction F JIS0K, 0K mminch ASME 0, E Actuator size 0 BS- 0 0 BS- BS- BS- BS- 0 BS- BS- BS- 7 0 BS- BS- 7 BS- BS BS- BS- BS- BS- BS- BS- BS- BS- BS BS- 7 BS- 9 L LT J C X W W Notes"X" is the dimension to have mounted Motoyama EA-9AC Positioner. This dimension will be changed to have mounted other type of Positioners. Approx. Weights shows the weight of valve assembly without Hand Wheel Approx Weightskg 0K 0K Mounting orientations Various orientations of valve body and actuator are available, as shown below, in order for easy installation in limited piping space. Also available to mount actuator in horizontal position. D- and R- is the standard orientation to be delivered unless otherwise specified. Direct Action Reverse Action D- D- Standard D- D- R- R- Standard R- R- Legend : Flow direction

10 7. Options Model 9-CT Ceramic Trim Gyroll Model 9-CT has been improved its anti-wear ability, in addition to the original superior controllability, by applying ceramic parts on the plug and seat-ring. 0A Typical Applications For anti-wear, slurry applications Desulphurization PlantSlurry Sewage Plant Fly ash conveying line Specifications Body Type 9-CT mm 0 0 inch Body CF, CFM, CFM Materials Plug Seat-Ring Guide Flow Direction Pressure Range Temperature Range Flow to close MPaG0kgf/cm G 00 0 Plug HeadCeramicsZirconia for mm and 0mm, Alumina for 0mm to 0mm Plug BaseSCSASUS, SCSASUSL CeramicsZirconia for mm and 0mm, Alumina for 0mm to 0mm SUS CoCr Alloy O ring, SUSL CoCr Alloy O ring 0Thermal Shock Temp. Allowable Seat Leakage ANSI/FCI Class 0.0% of rated Cv NoteAvailable port size is 0% and 0% port only. Flow Direction Flow Direction A Model 9-CS Body Ceramics Sprayed Gyroll Model 9-CS has been improved its anti-erosion ability, in addition to the ceramics trim, by applying ceramic coating thermal spray on inner wall surface of the valve body. Specifications Body Type 9-CS mm inch Body CF, CFM, CFM Inner ceramics thermal sprayedalumina Materials Plug Seat-Ring Guide Flow Direction Pressure Range Temperature Range Allowable Seat Leakage Plug HeadCeramicsZirconia for mm and 0mm, Alumina for 0mm to 0mm Plug BaseSCSASUS, SCSASUSL CeramicsZirconia for mm and 0mm, Alumina for 0mm to 0mm SUS CoCr Alloy O ring, SUSL CoCr Alloy O ring Flow to close MPaG0kgf/cm G 0Thermal Shock Temp. ANSI/FCI Class 0.0% of rated Cv Flow Direction Sprayed Ceramics NotesAvailable port size is 0% and 0% port only. Body and bonnet split type for valve size mm to 0mm

11 . Jacketed Body Jacketed Valve Body is most suitable for high viscous fluid service. Jacketed Body is available for standard Valve Body Pressure Rating specified on page. Full Jacketed Type B Type Where duplex tube is piping, Connection Flange Size is coming larger than Valve standard connection Size. In this design, Full Jacketed TypeB Typeis employed. Standard Dimensions Flange Size mm inch mm inch Unit mm F Semi Jacketed Type G Type Semi Jacketed Type is employed if Connection Flange Size is equal to Valve standard connection Size. Standard Dimensions Flange Size mm inch mm inch Unit mm F

12 Bulletin No.MCE-BB 本社工場 9-97 宮城県黒川郡大衡村大衡字亀岡 - TEL(0)-( 代表 ) / FAX(0)- info@motoyama-cp.co.jp Main Office & Factory -, Aza Kameoka, Ohira, Ohira-mura, Kurokawa-gun, Miyagi-Pref., 9-97, Japan TEL +--- / FAX info-overseas@motoyama-cp.co.jp 販売 サービスネットワーク 東京支店 神奈川県川崎市川崎区駅前本町 0- クリエ川崎 F TEL(0) -7 ( 代表 ) FAX(0) -77 大阪支店 0-00 大阪市西区北堀江一丁目 -9 クリモトビル F TEL(0) - ( 代表 ) FAX(0) - 国際営業部 神奈川県川崎市川崎区駅前本町 0- クリエ川崎 F TEL(0) -77 FAX(0) -77 札幌営業所 札幌市北区新琴似 条七丁目 -7 リバティタウン P 棟 0 号 TEL(0) 7-0 FAX(0) 7- 東北営業所 9-97 宮城県黒川郡大衡村大衡字亀岡 - TEL(0) -7 FAX(0) -7 上越営業所上越サービスセンター 関東営業所千葉サービスセンター 9-00 新潟県上越市大字東中島 9 番地 TEL(0)- FAX(0) 千葉県市原市岩崎西一丁目 -9 TEL(0) -00 FAX(0) -0 静岡営業所 - 静岡市駿河区登呂二丁目 0- ハイツ富士 F TEL(0) -7 FAX(0) -9 名古屋営業所中部サービスセンター -00 愛知県北名古屋市久地野安田 番地 TEL(0) - FAX(0) - 阪神サービスセンター 0-09 大阪府豊中市勝部二丁目 - TEL(0) -7 FAX(0) -7 徳山営業所周南サービスセンター 四国営業所新居浜サービスセンター 大分営業所大分サービスセンター 7-0 山口県周南市新地一丁目 - TEL(0) -0 FAX(0) 愛媛県新居浜市観音原町 0- TEL(097) 0-0 FAX(097) 大分市大字三佐字山ノ神 9- TEL(097) 7- FAX(097) - 海外関連会社 本山阀门 ( 大連 ) 有限公司 0 中国遼寧省大連市金州新区港興大街 9--7 TEL FAX 海外販売代理店中国 韓国 台湾 シンガポール インドネシア マレーシア サウジアラビア SALES AND SERVICE NETWORK Overseas Marketing & Sales Dept. : th Floor, Clie Kawasaki, 0-, Ekimae-honcho, Kawasaki-ku, Kawasaki City, Kanagawa Pref., JAPAN TEL: FAX : Domestic Sales Branches : Tokyo, Osaka, Sapporo, Tohoku, Joetsu, Kanto, Shizuoka, Nagoya, Hanshin, Tokuyama, Shikoku, Oita OVERSEAS AFFILIATED COMPANY MOTOYAMA VALVE (DALIAN) CO., LTD Gangxing Street 9--7, Jinzhou New District, Dalian City, 0 China TEL: FAX: OVERSEAS NETWORK China, Korea, Taiwan, Singapore, Indonesia, Malaysia, Saudi Arabia 本カタログの記載内容は 商品の改良等のため予告なく変更することがありますので予めご了承下さい MOTOYAMA is continuously improving and upgrading its product design, specifications and/or dimensions. Information included herein is subject to change without notice. 本カタログは正しい情報の提供を目的としたものであり 本製品の市場性または適合性の保証を証明するものではありません This catalog is supplied for information purpose only and should not be considered certified marketability and conformability of this product. 0 MSP