Bio-Pharm Fittings ASME BPE. NEUMO Ehrenberg Group. Semiconductor Bio-Pharm Hygienic

Size: px

Start display at page:

Download "Bio-Pharm Fittings ASME BPE. NEUMO Ehrenberg Group. Semiconductor Bio-Pharm Hygienic"

Leon Stone
5 years ago
Views:

1 io-pharm Fittings SME PE Semiconductor io-pharm Hygienic NEUMO Ehrenberg Group

io-pharm Fittings Maximum Purity With Guaranteed Ra Where cleanability of fittings is the issue, every step in the production process must be carefully controlled.

The cleaning procedures incorporate multi-process degreasing and washing steps provided to eliminate any residues of hydrocarbons and stains, using pure deionized water.

2 io-pharm Fittings Maximum Purity With Guaranteed Ra Where cleanability of fittings is the issue, every step in the production process must be carefully controlled. Our production methods insure that no mechanical damage or flaws occur during manufacturing. The cleaning procedures incorporate multi-process degreasing and washing steps provided to eliminate any residues of hydrocarbons and stains, using pure deionized water. Our procedures and process capabilities result in the formation of a stabilized passive layer and increased corrosion resistance. Our products proudly offer: Maximum Cleanability MaxPure fittings are cleaned using a multiple step process to assure clean surface, areas inside and out with repeatability every time. Every fitting is passivated according to SME PE and STM 967 standards. Full Traceability We provide full traceability for each of our products by supplying all necessary production process data. Starting from certifications and incoming inspection of raw materials, through in-process quality control, final inspection, marking and packaging. The process is also completely documented with a unique job number for each PE process component. Every Fitting is Quality Inspected ll around quality and meticulous inspection insures that every fitting will be of the highest quality and in total compliance with all SME-PE standards. MaxPure fittings are 00% visual inspected. NEUMO Ehrenberg Group The NEUMO Ehrenberg Group, a diversified multi-national organization headquartered in Germany, was founded by Senator Henry Ehrenberg in 947. Over the last decade, the Group has become a leading manufacturer for worldwide iopharmaceutical process fittings and components. With its three leading companies, NEUMO, VNE and EGMO, the group has developed a worldwide distribution network supporting major iopharmaceutical multinational accounts. The Neumo Ehrenberg Group s synergy and strategy toward the iopharmaceutical sectors provide customers with innovation, all around quality and efficiency. Through our Group s volunteer participation in leading standards organizations, we are actively involved in shaping the future for a cleaner, safer and more productive workplace in the iopharmaceutical Processing Industry. 2 EGMONEUMO Ehrenberg Group

Index Fittings Specifications... Page 4 Electro-Polishing... Page 6 Tube Specifications.

.. Page 9 Elbows Page 9-2 Tees Page -2 Reducers Page 22-27 Use Points Page 28 True Y

Page 9 SME PE DT Index... Page 40 io Fittings... Page 44 Manifolds (Multi Tee).

3 Index Fittings Specifications... Page 4 Electro-Polishing... Page 6 Tube Specifications... Page 8 Ordering Information... Page 8 Fittings... Page 9 Elbows Page 9-2 Tees Page -2 Reducers Page Use Points Page 28 True Y s & Laterals Page 29-0 Crosses Page -2 Ferrules Page Solid End Caps & Weld Caps Page 4 ccessories... Page 5 Gaskets Page 5 Clamps Page 6-7 dapters Page 8-9 Stub Ends & Slip On Flanges Page 9 SME PE DT Index... Page 40 io Fittings... Page 44 Manifolds (Multi Tee)... Page 46 Customized Components... Page 47 MTR - Material Test Report... Page 48 Technical Information... Page 49 Industry Terms Glossary... Page 5 SME PE - Certificate... Page 55 io-pharm Fittings

4 io-pharm Fittings Fittings Specifications Product: Stainless Steel fittings comply with SME PE standards. Gaskets are made from compounds which are FD approved and USP 87, 88 Pharmaceutical Class VI certified. Sizes: Stainless Steel fittings are available in sizes ¼ - 6 O.D. tube size. Material: Fittings are fabricated in ISI 6L Stainless Steel with sulfur content of % achieving superior repeatability for automatic orbital welding process. & Tolerances: as specified in SME PE Part DT-- Size O.D. Wall Thickness Mechanical Polish (MP) Wall Thickness Electropolish (EP) Squareness Face to Tangent, Off ngle, 0 Equivalent ngle (for O) Off Plane, P Centerline Radius (CLR), R in. in. mm in. mm in. mm in. mm in. mm deg in. mm in. mm 4 ± ± / / / / ± ± / / / / ± ± / / / / ± ± / / / / ± ± / / / / ± ± / / / / ± ± / / / / ± 0.00 ± / / / / ± 0.00 ± / / / / ± 0.05 ± / / / / ± 0.00 ± / / / / Roundness Wall Thickness O P T R C O Squareness Face to Tangent Off ngle E Off Plane Height General Notes: a. Tolerance on E end-to-end and center-to-end: in. (.27 mm) b. Tolerance for centerline radius (CLR) is ±0% of the nominal dimension E 4 EGMONEUMO Ehrenberg Group

Fittings Specifications Surface Finish: Reference: SME PE-204, Part SF, Table SF-2.4-. Surface Finish Code PE Surface Designation Ra Maximum µ-in.

5 Mechanically Polished [] Mechanically polished to 2 Ra µ-in. PD SF4 5 0.8 Mechanically Polished [] & Electropolished Light Polish PM SF4 5 0.

5 Fittings Specifications Surface Finish: Reference: SME PE-204, Part SF, Table SF Surface Finish Code PE Surface Designation Ra Maximum µ-in. µm Inside Surface Surface Condition Outside Surface Surface Condition PX SF0 No finish requirement No finish requirement PC SF Mechanically Polished [] Light Polish PL SF Mechanically Polished [] Mechanically polished to 2 Ra µ-in. PD SF Mechanically Polished [] & Electropolished Light Polish PM SF Mechanically Polished [] & Electropolished Mechanically polished to 2 Ra µ-in. PR Mechanically Polished [] & Electropolished Mechanically polished to 2 Ra µ-in. [] Or any other finishing method that meets the Ra max. MaxPure fittings guarantee the Ra in all internal surfaces, including bent areas where it is difficult to polish and difficult to measure. ll Ra readings are taken across the lay, wherever possible. No single Ra reading shall exceed the Ra max. value in this table. Other Ra readings are available if agreed upon between owner/user and supplier, not to exceed values in this table. Cleaning: multi step cleaning cycle is conducted to ensure that fittings are cleaned with a perfect passivation layer. The cleaning process involves degreasing, pickling, electro polishing (as required) and passivation. During the final stage, the fittings are double-rinsed using D.I. water. Inspection Procedures: ll fittings produced by EGMO production are 00% visually inspected for any surface finish imperfections, as mentioned in Table SF-2.2-, SF-2.2-2, SF-2.4- and SF 2.6- in the SME PE 204 specification. ll dimensional characteristics are inspected for tolerances listed in parts DT-- to DT-9.- in the SME PE 204 specification. Fitting Marking Information: Each fitting and process component is permanently laser Marked to show the following: a. Heat number/code traceable to material test report for each product contact surface component b. Material type c. Manufacturer s name, logo, & trademark d. Product contact surface designation for the appropriate PE specification e. SME PE mark Packaging & Labeling: Each fitting is capped, bagged and labeled in full compliance with the SME PE standard. Every label includes a QR Code which directs to the fitting s Material Test Report (Please refer to page 46). Documentation: Full Material Test Reports are supplied with the finished products and are available On-Line at io-pharm Fittings 5

6 io-pharm Fittings Electro-Polishing Why MaxPure EP io-pharm Fittings Lead the Industry MaxPure EP is EGMO s line of stainless steel fittings that meet - and exceed - the highly specialized surface finishing requirements of the bio-pharma industry as detailed in the SME PE (The merican Society of Mechanical Engineers - ioprocessing Equipment) guidelines. The uncompromising high quality of EGMO s MaxPure EP products is a result of years of experience and accumulated know-how in the electropolishing process during which EGMO has optimized the following four critical elements: a. The temperature of the electrolyte solution. b. The amplitude of the cathodes and their location relevant to the product. c. The level of acidity of the solution. d. The amount of the time that the part is immersed in the solution. NOTE: The SME PE guidelines are very clear, for example, that flash electropolishing, i.e., immersion of the part in the electrolyte solution for a very short period of time, is unacceptable. Schematic Set-up of EP System Voltage Control Cathode Rack Piece (node) s a result, MaxPure EP products stand out from competing products in the following ways: thicker EP layer to minimize rouging Higher Chrome concentration for better corrosion resistance Guaranteed smoothness (Ra) in all internal surfaces to reduce io film EP EP Layer thickness >20Å SME PE >5Å Reccomendation Competitor Flash EP EP Time period 6 EGMONEUMO Ehrenberg Group

7 Removal of Contaminants MaxPure EP removes the contaminants that were introduced by the various production processes. The unique MaxPure EP process achieves a level of contaminant removal that exceeds the SME PE standard. Superior Corrosion Resistance During the electropolishing process naturally occurring chrome in the product s base metal is pulled to the surface. The thicker the chrome layer that forms on the product surface, the more resistant it will be to corrosion over time. It will also decrease rouging. The highly optimized MaxPure EP process ensures a particularly thick chrome layer - one of the reasons why MaxPure EP fittings dominate the bio-pharma sector. Tube inner surface Contaminant Metal contamination removed by EP by EP Tube inner surface Cr Cr Cr Cr Cr Chrome is is pulled to the tube inner inner surface surface Unparalleled Surface Smoothness The holy grail of surface finishing smoothness is to achieve as low an Ra (Roughness average) value as possible, where Ra is the arithmetic mean of the vertical deviations of the roughness profile from a mean line. Rougher surfaces create more friction and wear quicker. Surface irregularities are potential sites not only for the formation of cracks and corrosion, but for the build-up of bacteria. Mechanical polishing and buffing, which is the first stage of surface finishing for metals, can achieve good Ra values, but inevitably leave microscopic metal particles and other contaminants on the top surface layer, as well as compounds and foreign matter trapped just below the surface layer. efore MaxPure EP fter MaxPure EP The MaxPure EP process dramatically improves the mechanically polished surface smoothness. MaxPure EP Exceeds the SME PE Quality Requirements The table below shows how MaxPure EP exceeds the SME PE quality requirements. The thickness of the electropolish layer, measured in ngstroms. The thicker the layer, the more contaminant-free and corrosion-resistant the fitting is. Cr/Fe: The ratio of chrome/iron. The higher the ratio, the higher the corrosion-resistance. ttribute SME PE Recommendation EGMO Electropolishing EP layer thickness 5Å < 20Å < CR/Fe ratio <.5 < io-pharm Fittings 7

8 io-pharm Fittings Tube Specifications Standards: STM -269 / 270-S2 SME PE Surface Finish: Surface finish specifications are the same for fittings & tubes. Please refer to table SF-2.4- page 5. Tubing Dimensional Tolerances: Tubing specifications, STM -269/270-S2 Tubing Diameter Wall Thickness OD Tolerance Length (STM Spec.) Length (STM Spec.) Wall Thickness Tolerance inch mm. inch mm. inch mm. inch mm. STM Spec / / /- 0% / / /- 0% / / /- 0% / / /- 0% / / /- 0% / / /- 0% / / /- 0% / / /- 0% / / /- 0% / / /- 0% / / /- 0% Ordering Information To specify the part completely, start with the product description and select the additional options as shown below: Description 2 Material Other materials can be supplied upon request TE2S 6L.5 PL Size 4, 8, 2, 4,, 2, 2, 2 2,, 4, 6 4 Surface Finish (SF) PX, PC, PL, PM, PD, PR 90 weld ends elbow, ½ size, PL surface finish. 8 EGMONEUMO Ehrenberg Group

9 Elbows - 45 TE2KS - 45 ELOW in. mm TE2KS6L TE2KS6L TE2KS6L TE2KS6L TE2KS6L TE2KS6L TE2KS6L TE2KS6L TE2KS6L TE2KS6L TE2KS6L PE TLE # DT TE2KC - 45 ELOW CLMP ONE END in. mm in. mm TE2KC6L TE2KC6L TE2KC6L TE2KC6L * TE2KC6L TE2KC6L TE2KC6L TE2KC6L TE2KC6L TE2KC6L TE2KC6L * Note: Clamp Ferrule can also be orderd with Type connections according to the SME PE standard. PE TLE # DT TEG2K - 45 ELOW in. mm TEG2K6L TEG2K6L TEG2K6L TEG2K6L * TEG2K6L TEG2K6L TEG2K6L TEG2K6L TEG2K6L TEG2K6L TEG2K6L * Note: Clamp Ferrule can also be orderd with Type connections according to the SME PE standard. PE TLE # DT io-pharm Fittings 9

10 io-pharm Fittings Elbows T TE2S - 88 ELOW T α=88 in. mm in. mm TE2S886L TE2S886L TE2S886L TE2S886L TE2S886L TE2S886L TE2S886L TE2S886L T TE2C - 88 ELOW T α=88 in. mm in. mm in. mm TE2C886L TE2C886L * TE2C886L TE2C886L TE2C886L TE2C886L TE2C886L TE2C886L Note: 89 & 9 elbows are available upon request. * Note: Clamp Ferrule can also be orderd with Type connections according to the SME PE standard. 88 TEG2C - 88 ELOW T α=88 in. mm in. mm TEG2C886L TEG2C886L * TEG2C886L TEG2C886L TEG2C886L TEG2C886L TEG2C886L TEG2C886L * Note: Clamp Ferrule can also be orderd with Type connections according to the SME PE standard. 0 EGMONEUMO Ehrenberg Group

11 Elbows - 90 TE2S - 90 ELOW in. mm TE2S6L TE2S6L TE2S6L TE2S6L TE2S6L TE2S6L TE2S6L TE2S6L TE2S6L TE2S6L TE2S6L PE TLE # DT-4..- TE2C - 90 ELOW CLMP ONE END Ordering Code in. mm in. mm TE2C6L TE2C6L TE2C6L TE2C6L * TE2C6L TE2C6L TE2C6L TE2C6L TE2C6L TE2C6L TE2C6L * Note: Clamp Ferrule can also be orderd with Type connections according to the SME PE standard. PE TLE # DT TEG2C - 90 ELOW in. mm TEG2C6L TEG2C6L TEG2C6L TEG2C6L * TEG2C6L TEG2C6L TEG2C6L TEG2C6L TEG2C6L TEG2C6L TEG2C6L * Note: Clamp Ferrule can also be orderd with Type connections according to the SME PE standard. PE TLE # DT-4..- io-pharm Fittings

12 io-pharm Fittings Elbows T TE2S - 92 ELOW T α=92 in. mm in. mm TE2S926L TE2S926L TE2S926L TE2S926L TE2S926L TE2S926L TE2S926L TE2S926L T TE2C - 92 ELOW T α=92 in. mm in. mm in. mm TE2C926L TE2C926L * TE2C926L TE2C926L TE2C926L TE2C926L TE2C926L TE2C926L Note: 89 & 9 elbows are available upon request. * Note: Clamp Ferrule can also be orderd with Type connections according to the SME PE standard. TEG2C - 92 ELOW 92 T α=92 in. mm in. mm TEG2C926L TEG2C926L * TEG2C926L TEG2C926L TEG2C926L TEG2C926L TEG2C926L TEG2C926L * Note: Clamp Ferrule can also be orderd with Type connections according to the SME PE standard. 2 EGMONEUMO Ehrenberg Group

13 Tees - Equal TE7WWW - TEE in. mm TE7WWW6L TE7WWW6L TE7WWW6L TE7WWW6L TE7WWW6L TE7WWW6L TE7W WW6L TE7WWW6L TE7WWW6L TE7WWW6L TE7WWW6L PE TLE # DT TE7WWC - TEE in. mm in. mm C in. C mm TE7WWC6L TE7WWC6L * TE7WWC6L TE7WWC6L TE7WWC6L TE7WWC6L TE7WWC6L TE7WWC6L TE7WWC6L * Note: Clamp Ferrule can also be orderd with Type connections according to the SME PE standard. C TEG7 - TEE Size in. in. mm TEG76L TEG76L TEG76L TEG76L * TEG76L TEG76L TEG76L TEG76L TEG76L TEG76L TEG76L * Note: Clamp Ferrule can also be orderd with Type connections according to the SME PE standard. PE TLE # DT io-pharm Fittings

14 io-pharm Fittings Tees o TE7WWW886L - RNCH TEE 88 in. mm TE7WWW886L TE7WWW886L TE7WWW886L TE7WWW886L TE7WWW886L TE7WWW886L Note: Reducing sizes and special end configurations can be supplied upon request. TEES o 88 o TE7WWW766L - 76 RUN TEE in. mm in. mm TE7WWW766L TE7WWW766L TE7WWW766L TE7WWW766L TE7WWW766L TE7WWW766L Note: Reducing sizes and special end configurations can be supplied upon request. 4 EGMONEUMO Ehrenberg Group

15 Tees - Short Outlet TE7WWCS - SHORT OUTLET TEE in. mm in. mm TE7WWCS6L TE7WWCS6L TE7WWCS6L TE7WWCS6L * TE7WWCS6L TE7WWCS6L TE7WWCS6L TE7WWCS6L TE7WWCS6L TE7WWCS6L TE7WWCS6L * Note: Clamp Ferrule can also be orderd with Type connections according to the SME PE standard. PE TLE # DT TE7WCSW - SHORT OUTLET RUN TEE in. mm in. mm C in. C mm TE7WCSW6L TE7WCSW6L TE7WCSW6L TE7WCSW6L * TE7WCSW6L TE7WCSW6L TE7WCSW6L TE7WCSW6L TE7WCSW6L TE7WCSW6L TE7WCSW6L * Note: Clamp Ferrule can also be orderd with Type connections according to the SME PE standard. PE TLE # DT C TEG7S - SHORT OUTLET TEE in. mm in. mm TEG7S6L TEG7S6L * TEG7S6L TEG7S6L TEG7S6L TEG7S6L TEG7S6L TEG7S6L TEG7S6L * Note: Clamp Ferrule can also be orderd with Type connections according to the SME PE standard. PE TLE # DT io-pharm Fittings 5

16 io-pharm Fittings Tees - Reducing PE TLE # DT TE7RWWW - REDUCING TEE in. mm in. mm 8 x TE7RWWW6L.75x x TE7RWWW6L.5x x TE7RWWW6L.5x x TE7RWWW6L.75x x TE7RWWW6L.75x x TE7RWWW6L.75x.5-.. x TE7RWWW6L.0x x TE7RWWW6L.0x x TE7RWWW6L.0x.5-.. x TE7RWWW6L.0x x TE7RWWW6L.5x x TE7RWWW6L.5x x TE7RWWW6L.5x x TE7RWWW6L2.0x x TE7RWWW6L2.0x x TE7RWWW6L2.0x x TE7RWWW6L2.0x x TE7RWWW6L2.5x x TE7RWWW6L2.5x x TE7RWWW6L2.5x x TE7RWWW6L2.5x x TE7RWWW6L2.5x x TE7RWWW6L.0x.5-.. x TE7RWWW6L.0x x TE7RWWW6L.0x.0-.. x TE7RWWW6L.0x.5-.. x TE7RWWW6L.0x x TE7RWWW6L.0x x TE7RWWW6L4.0x x TE7RWWW6L4.0x x TE7RWWW6L4.0x x TE7RWWW6L4.0x x TE7RWWW6L4.0x x TE7RWWW6L4.0x x TE7RWWW6L4.0x x TE7RWWW6L6.0x x TE7RWWW6L6.0x EGMONEUMO Ehrenberg Group

Tees - Reducing TE7RWWC - REDUCING TEE in. mm in. mm 4 x 2 2.000 50.8 2.500 6.5 TE7RWWC6L.75x.5-.. * x 2 2.25 54.0 2.625 66.7 TE7RWWC6L.0x.5-.. * x 4 2.25 54.0 2.625 66.7 TE7RWWC6L.0x.75-.. 2 x 2 2.

25 79.4.75 85.7 TE7RWWC6L2.5x.5-.. 2 2 x 2.25 79.4.75 85.7 TE7RWWC6L2.5x.5-.. 2 2 x 2.25 79.4.75 85.7 TE7RWWC6L2.5x2.0-.. x *.75 85.7.625 92. TE7RWWC6L.0x.0-.. x 2.75 85.7.625 92. TE7RWWC6L.0x.5-.. x 2.75 85.7.625 92. TE7RWWC6L.0x2.

17 Tees - Reducing TE7RWWC - REDUCING TEE in. mm in. mm 4 x TE7RWWC6L.75x.5-.. * x TE7RWWC6L.0x.5-.. * x TE7RWWC6L.0x x TE7RWWC6L.5x x TE7RWWC6L.5x x * TE7RWWC6L.5x x TE7RWWC6L2.0x x TE7RWWC6L2.0x x * TE7RWWC6L2.0x x TE7RWWC6L2.0x x TE7RWWC6L2.5x x TE7RWWC6L2.5x x TE7RWWC6L2.5x x * TE7RWWC6L.0x.0-.. x TE7RWWC6L.0x.5-.. x TE7RWWC6L.0x x TE7RWWC6L.0x x * TE7RWWC6L4.0x x TE7RWWC6L4.0x x TE7RWWC6L4.0x x TE7RWWC6L4.0x x TE7RWWC6L4.0x x TE7RWWC6L6.0x x TE7RWWC6L6.0x * Note: Clamp Ferrule can also be orderd with Type connections according to the SME PE standard. io-pharm Fittings 7

18 io-pharm Fittings Tees - Reducing PE TLE # DT TE7RWWCS-SHORT OUTLET REDUCING TEE in. mm in. mm 8 x TE7RWWCS6L.75x x TE7RWWCS6L.5x x TE7RWWCS6L.5x x TE7RWWCS6L.75x x TE7RWWCS6L.75x x TE7RWWCS6L.75x.5-.. x TE7RWWCS6L.0x.5-.. x TE7RWWCS6L.0x0.75 x TE7RWWCS6L.0x.5-.. x TE7RWWCS6L.0x x TE7RWWCS6L.5x x TE7RWWCS6L.5x x * TE7RWWCS6L.5x x TE7RWWCS6L2.0x x TE7RWWCS6L2.0x x * TE7RWWCS6L2.0x x TE7RWWCS6L2.0x x TE7RWWCS6L2.5x x TE7RWWCS6L2.5x x * TE7RWWCS6L2.5x x TE7RWWCS6L2.5x x TE7RWWCS6L2.5x x TE7RWWCS6L4.0x.5-.. x TE7RWWCS6L4.0x x * TE7RWWCS6L.0x.0-.. x TE7RWWCS6L.0x.5-.. x TE7RWWCS6L.0x x TE7RWWCS6L.0x x TE7RWWCS6L.0x x TE7RWWCS6L.0x x * TE7RWWCS6L4.0x x TE7RWWCS6L4.0x x TE7RWWCS6L4.0x x TE7RWWCS6L4.0x x TE7RWWCS6L4.0x x TE7RWWCS6L6.0x x TE7RWWCS6L6.0x x * TE7RWWCS6L6.0x x TE7RWWCS6L6.0x x TE7RWWCS6L6.0x x TE7RWWCS6L6.0x x TE7RWWCS6L6.0x x TE7RWWCS6L6.0x Note: dditional sizes are available upon request. * Note: Clamp Ferrule can also be orderd with Type connections according to the SME PE standard. 8 EGMONEUMO Ehrenberg Group

19 Tees - Reducing TEG7R - REDUCING TEE in. mm in. mm 8 x TEG7R6L.75x x TEG7R6L.5x x TEG7R6L.5x x TEG7R6L.75x x TEG7R6L.75x x TEG7R6L.75x.5-.. * x TEG7R6L.0x * x TEG7R6L.0x * x TEG7R6L.0X.5-.. * x TEG7R6L.0x x TEG7R6L.5X x TEG7R6L.5x x * TEG7R6L.5X x TEG7R6L2.0X x TEG7R6L2.0x x * TEG7R6L2.0X x TEG7R6L2.0X x TEG7R6L2.5X x TEG7R6L2.5x x * TEG7R6L2.5X x TEG7R6L2.5X x TEG7R6L2.5X x TEG7R6L.0X.5-.. x TEG7R6L.0x x * TEG7R6L.0X.0-.. x TEG7R6L.0X.5-.. x TEG7R6L.0X x TEG7R6L.0X x TEG7R6L4.0X x TEG7R6L4.0x x * TEG7R6L4.0X x TEG7R6L4.0X x TEG7R6L4.0X x TEG7R6L4.0X x TEG7R6L4.0X x TEG7R6L6.0X x TEG7R6L6.0X * Note: Clamp Ferrule can also be orderd with Type connections according to the SME PE standard. PE TLE # DT io-pharm Fittings 9

20 io-pharm Fittings Tees - Reducing PE TLE # DT TEG7RS-SHORT OUTLET REDUCING TEE in. mm in. mm 8 x TEG7RS6L.75x x TEG7RS6L.5x x TEG7RS6L.5x x TEG7RS6L.75x x TEG7RS6L.75x x TEG7RS6L.75x.5-.. * x TEG7RS6L.0x * x TEG7RS6L.0x * x TEG7RS6L.0x.5-.. * x TEG7RS6L.0x x TEG7RS6L.5x x TEG7RS6L.5x x * TEG7RS6L.5x x TEG7RS6L2.0x x TEG7RS6L2.0x x * TEG7RS6L2.0x x TEG7RS6L2.0x x TEG7RS6L2.5x x TEG7RS6L2.5x x * TEG7RS6L2.5x x TEG7RS6L2.5x x TEG7RS6L2.5x x TEG7RS6L.0x.5-.. x TEG7RS6L.0x x * TEG7RS6L.0x.0-.. x TEG7RS6L.0x.5-.. x TEG7RS6L.0x x TEG7RS6L.0x x TEG7RS6L4.0x x TEG7RS6L4.0x x * TEG7RS6L4.0x x TEG7RS6L4.0x x TEG7RS6L4.0x x TEG7RS6L4.0x x TEG7RS6L4.0x x TEG7RS6L6.0x x TEG7RS6L6.0x x * TEG7RS6L6.0x x TEG7RS6L6.0x x TEG7RS6L6.0x x TEG7RS6L6.0x x TEG7RS6L6.0x x TEG7RS6L6.0x * Note: Clamp Ferrule can also be orderd with Type connections according to the SME PE standard. 20 EGMONEUMO Ehrenberg Group

21 Tees - Instrument TE7IWWCS - INSTRUMENT TEE in. mm in. mm 2 x TE7IWWCS6L.5x x TE7IWWCS6L.75x x TE7IWWCS6L.5x x TE7IWWCS6L.75x.5-.. x TE7IWWCS6L.0x x TE7IWWCS6L.5x x TE7IWWCS6L.75x x TE7IWWCS6L.0x x TE7IWWCS6L.5x PE TLE # DT TEG7IS - INSTRUMENT TEE in. mm in. mm 2 x TEG7IS6L.5x x TEG7IS6L.75x.5-.. * x TEG7IS6L.0x x TEG7IS6L.5x x TEG7IS6L.75x * x TEG7IS6L.0x x TEG7IS6L.5x * Note: Clamp Ferrule can also be orderd with Type connections according to the SME PE standard. PE TLE # DT io-pharm Fittings 2

22 io-pharm Fittings Reducers - Concentric L4 L PE TLE # DT-4..- TESWW - SHORT CONCENTRIC REDUCER Overall Length,, in Overall Length,, mm Minimum O.D. Tangent, Small End, L, in. Minimum O.D. Tangent, Small End, L, mm Minimum O.D. Tangent, Large End, L4, in. Minimum O.D. Tangent, Large End, L4, mm. * 8 x TESWW6L.75x * 2 x TESWW6L.5x * 2 x TESWW6L.5x * 4 x TESWW6L.75x x TESWW6L.75x.5-.. x TESWW6L.0x.5-.. x TESWW6L.0x x TESWW6L.5x x TESWW6L.5x x TESWW6L2.0x x TESWW6L2.0x x TESWW6L2.5x x TESWW6L2.5x x TESWW6L.0x.5-.. x TESWW6L.0x x TESWW6L.0x x TESWW6L4.0x x TESWW6L4.0x x TESWW6L4.0x x TESWW6L6.0x x TESWW6L6.0x This product is available in PM and PL surface finishes only. * Note: vailable upon request. 22 EGMONEUMO Ehrenberg Group

23 Reducers - Concentric TESCW - SHORT CONCENTRIC REDUCER Overall Length,, in Overall Length,,mm Minimum O.D. Tangent, Small End, L, in. Minimum O.D. Tangent, Small End, L, mm * 8 x TESCW6L.75x * 2 x TESCW6L.5x * 2 x TESCW6L.5x * 4 x TESCW6L.75x x TESCW6L.75x.5-.. x TESCW6L.0x.5-.. x TESCW6L.0x x TESCW6L.5x x TESCW6L.5x x TESCW6L2.0x x TESCW6L2.0x x TESCW6L2.5x x TESCW6L2.5x x TESCW6L.0x.5-.. x TESCW6L.0x x TESCW6L.0x x TESCW6L4.0x x TESCW6L4.0x x TESCW6L4.0x x TESCW6L6.0x x TESCW6L6.0x This product is available in PM and PL surface finishes only. * Note: vailable upon request. L PE TLE # DT TEGSCC - SHORT CONCENTRIC REDUCER Overall Length,, in Overall Length,, mm * 8 x TEGSCC6I.75x.25 * 2 x TEGSCC6I.5x.25 * 2 x TEGSCC6I.5x.75 * 4 x TEGSCC6I.75x.75 4 x TEGSCC6I.75x.5 x TEGSCC6I.0x.5 x TEGSCC6I.0x.75 2 x TEGSCC6I.5x.75 2 x TEGSCC6I.5x.0 2 x TEGSCC6I2.0x.0 2 x TEGSCC6I2.0x x TEGSCC6I2.5x x TEGSCC6I2.5x2.0 x TEGSCC6I.0x.5 x TEGSCC6I.0x2.0 x TEGSCC6I.0x2.5 4 x TEGSCC6I4.0x2.0 4 x TEGSCC6I4.0x2.5 4 x TEGSCC6I4.0x.0 6 x TEGSCC6I6.0x.0 6 x TEGSCC6I6.0x4.0 This product is available in PM and PL surface finishes only. * Note: vailable upon request. PE TLE # DT-4..- io-pharm Fittings 2

24 io-pharm Fittings Reducers - Conical TEGI - CONICL INSTRUMENT RE TEGI - SHORT CONICL INSTRUMENT REDUCER C in. mm in. mm C in. C mm 4 x TEGL6L.75x x TEGL6L.0x x TEGL6L.0x x TEGL6L.5x x TEGL6L.5x x TEGL6L.5x x TEGL6L2.0x x TEGL6L2.0x x TEGL6L2.0x x TEGL6L2.0x x TEGL6L2.5x x TEGL6L2.5x x TEGL6L2.5x x TEGL6L2.5x x TEGL6L2.5x x TEGL6L.0x x TEGL6L.0x x TEGL6L.0x x TEGL6L.0x x TEGL6L.0x x TEGL6L.0x x TEGL6L4.0x x TEGL6L4.0x x TEGL6L4.0x x TEGL6L4.0x x TEGL6L4.0x x TEGL6L4.0x x TEGL6L4.0x Note: ll reducers sizes are.250 overall length. 24 EGMONEUMO Ehrenberg Group

Reducers - Eccentric TE2SWW - SHORT ECCENTRIC REDUCER Minimum O.D. Minimum O.D. Minimum O.D. Minimum O.D. Overall Length, Overall Length, Tangent, Small Tangent, Small Tangent, Large Tangent, Large, in, mm End, L, in.

. * 4 x 8 2.000 50.8 0.750 9.05.000 25.4 TE2SWW6L.75x.75-.. 4 x 2 2.25 5.975.000 25.4.000 25.4 TE2SWW6L.75x.5-.. x 2 2.500 6.5.000 25.4.000 25.4 TE2SWW6L.0x.5-.. x 4 2.25 5.975.000 25.4.000 25.4 TE2SWW6L.0x.75-.. 2 x 4.

25 Reducers - Eccentric TE2SWW - SHORT ECCENTRIC REDUCER Minimum O.D. Minimum O.D. Minimum O.D. Minimum O.D. Overall Length, Overall Length, Tangent, Small Tangent, Small Tangent, Large Tangent, Large, in, mm End, L, in. End, L, mm End, L4, in. End, L4, mm * 8 x TE2SWW6L.75x * 2 x TE2SWW6L.5x * 2 x TE2SWW6L.5x * 4 x TE2SWW6L.75x x TE2SWW6L.75x.5-.. x TE2SWW6L.0x.5-.. x TE2SWW6L.0x x TE2SWW6L.5x x TE2SWW6L.5x x TE2SWW6L2.0x x TE2SWW6L2.0x x TE2SWW6L2.5x x TE2SWW6L2.5x x TE2SWW6L.0x.5-.. x TE2SWW6L.0x x TE2SWW6L.0x x TE2SWW6L4.0x x TE2SWW6L4.0x x TE2SWW6L4.0x x TE2SWW6L6.0x x TE2SWW6L6.0x L4 L PE TLE # DT-4..- This product is available in PM and PL surface finishes only. * Note: vailable upon request. io-pharm Fittings 25

26 io-pharm Fittings Reducers - Eccentric L PE TLE # DT TE2SCW - SHORT ECCENTRIC REDUCER Overall Length,, in Overall Length,, mm Minimum O.D. Tangent, Small End, L, in. Minimum O.D. Tangent, Small End, L, mm. * 8 x TE2SCW6L.75x * 2 x TE2SCW6L.5x * 2 x TE2SCW6L.5x * 4 x TE2SCW6L.75x x TE2SCW6L.75x.5-.. x TE2SCW6L.0x.5-.. x TE2SCW6Lx x TE2SCW6L.5x x TE2SCW6L.5x x TE2SCW6L2.0x x TE2SCW6L2.0x x TE2SCW6L2.5x x TE2SCW6L2.5x x TE2SCW6L.0x.5-.. x TE2SCW6L.0x x TE2SCW6L.0x x TE2SCW6L4.0x x TE2SCW6L4.0x x TE2SCW6L4.0x x TE2SCW6L6.0x x TE2SCW6L6.0x This product is available in PM and PL surface finishes only. * Note: vailable upon request. 26 EGMONEUMO Ehrenberg Group

Reducers - Eccentric TEG2SCC - SHORT ECCENTRIC REDCER Overall Length,, in Overall Length,, mm * 8 x 4 2.625 66.675 TEG2SCC6L.75x.25-.. * 2 x 4 2.875 7.025 TEG2SCC6L.5x.25-.. * 2 x 8 2.875 7.025 TEG2SCC6L.5x.75-.

27 Reducers - Eccentric TEG2SCC - SHORT ECCENTRIC REDCER Overall Length,, in Overall Length,, mm * 8 x TEG2SCC6L.75x * 2 x TEG2SCC6L.5x * 2 x TEG2SCC6L.5x * 4 x TEG2SCC6L.75x x TEG2SCC6L.75x.5-.. x TEG2SCC6L.0x.5-.. x TEG2SCC6L.0x x TEG2SCC6L.5x x TEG2SCC6L.5x x TEG2SCC6L2.0x x TEG2SCC6L2.0x x TEG2SCC6L2.5x x TEG2SCC6L2.5x x TEG2SCC6L.0x.5-.. x TEG2SCC6L.0x x TEG2SCC6L.0x x TEG2SCC6L4.0x x TEG2SCC6L4.0x x TEG2SCC6L4.0x x TEG2SCC6L6.0x x TEG2SCC6L6.0x This product is available in PM and PL surface finishes only. * Note: vailable upon request. PE TLE # DT-4..- io-pharm Fittings 27

28 io-pharm Fittings Use Points C TE2UWWW - 80 OTTOM OUTLET WELD USE POINT in. mm in. mm C in. C mm 4 x TE2UWWW6L.75x x TE2UWWW6L.75x x TE2UWWW6L.0x x TE2UWWW6L.5x x TE2UWWW6L2.0x x TE2UWWW6L2.5x.5-.. x TE2UWWW6L.0x x TE2UWWW6L4.0x.5-.. & ccording to SME PE 204, table DT C TE2UWWC - 80 OTTOM OUTLET CLMP USE POINT in. mm in. mm C in. C mm 4 x TE2UWWC6L.75x x TE2UWWC6L.75x x TE2UWWC6L.0x x TE2UWWC6L.5x x TE2UWWC6L2.0x x TE2UWWC6L2.5x.5-.. x TE2UWWC6L.0x x TE2UWWC6L4.0x.5-.. & ccording to SME PE 204, table DT C TE2USWWC - 80 SIDE OUTLET CLMP USE POINT in. mm in. mm C in. C mm 4 x TE2USWWC6L.75x x TE2USWWC6L.75x x TE2USWWC6L.0x x TE2USWWC6L.5x x TE2USWWC6L2.0x x TE2USWWC6L2.5x.5-.. x TE2USWWC6L.0x x TE2USWWC6L4.0x.5-.. & ccording to SME PE 204, table DT EGMONEUMO Ehrenberg Group

29 True Y s & Laterals TE28W - TRUE Y in. mm Nom. Wall TE28W6L TE28W6L TE28W6L TE28W6L TE28W6L TE28W6L TE28W6L TEG28 - CLMP TRUE Y in. mm * TEG286L TEG286L TEG286L TEG286L TEG286L TEG286L TEG286L * Note: Clamp Ferrule can also be orderd with Type connections according to the SME PE standard. io-pharm Fittings 29

30 io-pharm Fittings True Y s & Laterals TE28W - 45 LTERL in. mm in. mm C in. C mm D in. D mm * TE28W6L TE28W6L TE28W6L TE28W6L TE28W6L TE28W6L TE28W6L * Note: Clamp Ferrule can also be orderd with Type connections according to the SME PE standard. C D TEG28-45 CLMP LTERL in. mm in. mm C in. C mm * TEG286L TEG286L TEG286L TEG286L TEG286L TEG286L TEG286L * Note: Clamp Ferrule can also be orderd with Type connections according to the SME PE standard. C 0 EGMONEUMO Ehrenberg Group

31 Crosses TE9WWWW - CROSS in. mm in. mm TE9WWWW6L TE9WWWW6L TE9WWWW6L TE9WWWW6L TE9WWWW6L TE9WWWW6L TE9WWWW6L TE9WWWW6L TE9WWWW6L TE9WWWW6L TE9WWWW6L PE TLE# DT TEG9 - CROSS in. mm in. mm TEG96L TEG96L TEG96L TEG96L * TEG96L TEG96L TEG96L TEG96L TEG96L TEG96L TEG96L * Note: Clamp Ferrule can also be orderd with Type connections according to the SME PE standard. PE TLE# DT io-pharm Fittings

32 io-pharm Fittings Crosses TE9RWWWW - REDUCING CROSS in. mm in. mm 8 x TE9RWWWW6L.75x x TE9RWWWW6L.5x x TE9RWWWW6L.5x x TE9RWWWW6L.75x x TE9RWWWW6L.75x x TE9RWWWW6L.75x x TE9RWWWW6L.0x.75 x TE9RWWWW6L.0x.5 x TE9RWWWW6L.5x x TE9RWWWW6L.0x x TE9RWWWW6L..5x x TE9RWWWW6L..5x x TE9RWWWW6L..5x x TE9RWWWW6L2.0x x TE9RWWWW6L2.0x x TE9RWWWW6L2.0x x TE9RWWWW6L2.0x x TE9RWWWW6L.2.5x x TE9RWWWW6L.2.5x x TE9RWWWW6L2.5x x TE9RWWWW6L2.5x x TE9RWWWW6L2.5x x TE9RWWWW6L.0x.5-.. x TE9RWWWW6L.0x x TE9RWWWW6L.0x.0-.. x TE9RWWWW6L.0x.5-.. x TE9RWWWW6L.0x x TE9RWWWW6L.0x x TE9RWWWW6L4.0x x TE9RWWWW6L4.0x x TE9RWWWW6L4.0x x TE9RWWWW6L4.0x x TE9RWWWW6L4.0x x TE9RWWWW6L4.0x x TE9RWWWW6L4.0x x TE9RWWWW6L.6.0x x TE9RWWWW6L6.0x Note: dditional sizes are available upon request. 2 EGMONEUMO Ehrenberg Group

33 Ferrules TEG4M7 - CLMP FERRULE LONG Type in. mm D in. D mm TEG4M7 6L TEG4M7 6L TEG4M7 6L TEG4M7 6L TEG4M7 6L TEG4M7 6L TEG4M7 6L TEG4M7 6L TEG4M7 6L TEG4M7 6L TEG4M7 6L TEG4M7 6L For type & technical information please refer to page 46 ød PE TLE # DT-4..4-() TEG4M7 - CLMP FERRULE MEDIUM Type in. mm D in. D mm TEG4M7 6L TEG4M7 6L TEG4M7 6L TEG4M7 6L TEG4M7 6L TEG4M7 6L TEG4M7 6L TEG4M7 6L TEG4M7 6L TEG4M7 6L TEG4M7 6L TEG4M7 6L For type & technical information please refer to page 46 ø D PE TLE # DT-4..4-() TEG2CS - CLMP FERRULE SHORT Type in. mm D in. D mm TEG2CS 6L TEG2CS 6L TEG2CS 6L TEG2CS 6L TEG2CS 6L TEG2CS 6L TEG2CS 6L TEG2CS 6L TEG2CS 6L TEG2CS 6L TEG2CS 6L TEG2CS 6L For type & technical information please refer to page 46 ø D PE TLE # DT-4..4-(C) io-pharm Fittings

io-pharm Fittings Solid End Caps & Weld Caps PE TLE # DT-4..5- TE6W - WELD CP in. mm 2.500 8. TE6W6L.5-.. 4.500 8. TE6W6L.75-...500 8. TE6W6L.0-.. 2.500 8. TE6W6L.5-.. 2.500 8. TE6W6L2.0-.. 2 2.

87 4.7 0.984 24.9 TEG66L.75-.. 2 0.87 4.7 0.984 24.9 TEG66L.75-.. 4 0.87 4.7 0.984 24.9 TEG66L.75-.. (Type ) 0.250 6.4.9 4.0 TEG66L.0-.. 0.250 6.4.984 50. TEG66L.5-.. 2 0.250 6.4.984 50. TEG66L.5-.. 2 0.250 6.4 2.56 6.

34 io-pharm Fittings Solid End Caps & Weld Caps PE TLE # DT TE6W - WELD CP in. mm TE6W6L TE6W6L TE6W6L TE6W6L TE6W6L TE6W6L TE6W6L TE6W6L TE6W6L ø D PE TLE # DT TEG6 - SOLID END CP in. mm. D in. D mm TEG66L TEG66L TEG66L TEG66L (Type ) TEG66L TEG66L TEG66L TEG66L TEG66L TEG66L TEG66L TEG66L EGMONEUMO Ehrenberg Group

35 Gaskets C W TEG40 - GSKET in. mm in. mm C in. C mm W in. W mm TEG40.5* TEG40.75* Type TEG40.0-* TEG40.0* TEG40.5* TEG402.0* TEG402.5* TEG40.0* TEG404.0* TEG406.0* * Please specify the gasket material. Note: Gaskets are type USP Class VI Pharmaceutical Grade. GSKET MTERILS: PTFE VITON Envelope type - TEFLON with EPDM Filler TEFLON with VITON Filler SILICON UN EPDM and TEF-STEEL io-pharm Fittings 5

36 io-pharm Fittings Clamps MHHMD - DOULE HINGED HEVY DUTY CLMP in. mm MHHMD MHHMD MHHMD MHHMD MHHMD4.0 MHHM - HEVY DUTY CLMP in. mm 2 & MHHM.5 Type MHHM.0- & MHHM MHHM MHHM MHHM MHHM MHHM6.0 MHHM-H HEVY DUTY CLMP (WING NUT WITH HOLE) in. mm 2 & MHHM.5-H Type MHHM.0-H- & MHHM-H MHHM2.0-H MHHM2.5-H MHHM.0-H MHHM4.0-H MHHM6.0-H 6 EGMONEUMO Ehrenberg Group

Clamps MHHS - THREE PIECE HEVY DUTY CLMP in. mm 2 2.22 5.9 MHHS.5 2 2.654 67.

0 MHP - HIGH PRESSURE CLMP in. mm 2 & 4.062 26.97 MHP.5 2 2.046 5.97 MHP.5 2 2.578 65.

37 Clamps MHHS - THREE PIECE HEVY DUTY CLMP in. mm MHHS MHHS MHHS MHHS MHHS4.0 MHP - HIGH PRESSURE CLMP in. mm 2 & MHP MHP MHP MHP MHP MHP MHP6.0 io-pharm Fittings 7

38 io-pharm Fittings Hose dapters TEG4RT - HOSE DPTER in. mm 2 x TEG4RT6L.5x x TEG4RT6L.5x x TEG4RT6L.5x x TEG4RT6L.75x x TEG4RT6L.75x x TEG4RT6L.75x TEG4RT6L * TEG4RT6L TEG4RT6L TEG4RT6L TEG4RT6L TEG4RT6L TEG4RT6L * Note: Clamp Ferrule can also be ordered with Type connections according to the SME PE 204 standard. THROUGH 4 ½ & ¾ SIZES TEG2 - CLMP DPTER X MLE NPT in. mm 2 x TEG26L.5x x TEG26L.5x x TEG26L.5x x TEG26L x TEG26L.5x x TEG26L.75x x TEG26L.75x x TEG26L.75x x TEG26L.75x x TEG26L * TEG26L TEG26L TEG26L TEG26L TEG26L TEG26L * Note: Clamp Ferrule can also be ordered with Type connections according to the SME PE 204 standard 8 EGMONEUMO Ehrenberg Group

39 dapters TEG22 - CLMP DPTER X FEMLE NPT in. mm 2 x TEG226L.5x x TEG226L.5x x TEG226L.5x x TEG226L x TEG226L.5x x TEG226L.75x x TEG226L.75x x TEG226L.75x x TEG226L.75x x TEG226L * TEG226L TEG226L TEG226L TEG226L TEG226L TEG226L * Note: Clamp Ferrule can also be ordered with Type connections according to the SME PE 202 standard. ½ & ¾ SIZES THROUGH 4 Stub Ends & Slip On Flanges TE4W - TYPE STU END WITH GROOVES in. mm in. mm T in. T mm TE4W6L TE4W6L TE4W6L TE4W6L TE4W6L TE4W6L TE4W6L TE4W6L TE4W6L T E8SL - SLIP ON FLNGE in. mm in. mm C in. C mm D in. D mm C D - io-pharm Fittings 9

40 io-pharm Fittings sme pe Dt Index Drawing Part description 2009 DT ccording to SME-PE DT ccording to SME-PE Dt ccording to SME-PE 204 TE2S - 90 Elbow DT-7 DT-4..- DT-4..- TE2C - 90 Elbow clamp one end DT-2 DT DT TEG2C-90 Elbow cc DT-6 DT-4..- DT-4..- TE2KS - 45 Elbow WW DT-8 DT DT TE2KC - 45 Elbow clamp one end DT- DT DT TEG2K-45 Elbow CC DT-7 DT DT Elbow 80 WW (TE2UWWW - 80 bottom outlet weld use point) DT-2 DT DT TE7WWW - Equal Tee WWW DT-9 DT DT TE9WWWW - Equal Cross WWWW DT-9 DT DT EGMONEUMO Ehrenberg Group

41 sme pe Dt Index Drawing Part description 2009 DT ccording to SME-PE DT ccording to SME-PE Dt ccording to SME-PE 204 TE7WWCS - Short outlet Tee DT-5 DT DT TE7WCSW6L - TE7WCSW - Short outlet run Tee DT-25 DT DT TEG7 - Equal Tee CCC DT-8 DT DT Straight Cross CCCC DT-8 DT DT TEG7S - Short outlet Tee DT-27 DT DT TE7RWW - Reducing TEE DT-0 DT DT TE7RWWCS - short outlet reducing Tee DT-4 DT DT TEG7R - Reducing TEE DT-9 DT DT TEG7RS - Short outlet reducing TEE DT-20 DT DT io-pharm Fittings 4

42 io-pharm Fittings sme pe Dt Index Drawing Part description 2009 DT ccording to SME-PE DT ccording to SME-PE Dt ccording to SME-PE 204 TE7IWWCS - Instrument TEE DT-28 DT DT TEG7S - Instrument TEE DT-29 DT DT TEWW - Long concentric reducer DT- DT-4..- (a) N/ TE2WW - Long concentric reducer DT- DT-4..- (a) N/ TESWW - Short concentric reducer N/ DT-4..- (b) DT-4..- TE2SWW - Short eccentric reducer N/ DT-4..- (b) DT-4..- TECW - Long concentric reducer DT-26 DT (a) N/ TE2CW - Long concentric reducer DT-26 DT (a) N/ TESCW - Short concentric reducer N/ DT (b) DT EGMONEUMO Ehrenberg Group

43 sme pe Dt Index Drawing Part description 2009 DT ccording to SME-PE DT ccording to SME-PE Dt ccording to SME-PE 204 TE2SCW - Short eccentric reducer N/ DT (b) DT TEGCC - Long concentric reducer DT-2 DT-4..- (a) N/ TEG2CC - Long eccentric reducer DT-2 DT-4..- (a) N/ TEGSCC - Short concentric reducer N/ DT-4..- (b) DT-4..- TEG2SCC - Short eccentric reducer N/ DT-4..- (b) DT-4..- Clamp ferrule long / Medium / Short DT-22 DT DT TE6W - Weld cap DT-0 DT DT TEG6 - Solid end cap DT- DT DT io-pharm Fittings 4

io-pharm Fittings io Fittings ioconnect - Clean tube connection Optimized recess contour (patent approved) Highest press-on power at the transitions to wetted areas prevents dirt and germs

8) pressure PN6 (D6 - DN00, ½ - 4 ) Connect S - a unique solution without elastomer gasket Optimal recess contour and design of the sealing metallic surface (patent approved) Excellent

surface No gasket - no elevator effect Protection of the sealing contour against damage xial positioning by metal-to-metal-stop Exact positioning by central guidance Material grade.

44 io-pharm Fittings io Fittings ioconnect - Clean tube connection Optimized recess contour (patent approved) Highest press-on power at the transitions to wetted areas prevents dirt and germs getting into the sealing space (see SME-PE, Ch. SD-.7.2 and.7.6) Defined expansion pockets excludes dangerous escalator effect between wetted area and elastomer seat (see SME-PE, Ch. SD-.7.2) Self-draining even after expansion of seal due to high temperature (see SME-PE, Ch. SD-.7.7) Metal-to-metal-stop avoids stress or overcompression of gaskets (O-ring) (see SME-PE, Ch. SD-.7.8) pressure PN6 (D6 - DN00, ½ - 4 ) Connect S - a unique solution without elastomer gasket Optimal recess contour and design of the sealing metallic surface (patent approved) Excellent cleanability Tested by Fraunhofer-Institut for Grenzflächen-und ioverfahrenstechnik Hermetic tightness even under repeated temperature changes Defined pre-stressing on the metallic sealing surface No gasket - no elevator effect Protection of the sealing contour against damage xial positioning by metal-to-metal-stop Exact positioning by central guidance Material grade.445/6 L; other grades on request Wetted areas with roughness Ra<0,8µm (Ra<0,5µm on demand) acc. SME-PE, DIN866, DIN 850,ISO 27 Material Test Report according EN (on request DW 2) pproval for pressure application: issued by TÜV Germany (Süddeutschland) Pressure: PN 6 (DN 6 until DN 50) PN 0 (DN 65 until DN 00) PN 00 (DN 6 until DN 40, high pressure-aseptic connection) 44 EGMONEUMO Ehrenberg Group

.., allowing cleaning and sterilizing in place.

45 io Fittings iocontrol iocontrol is a fully aseptic modular system with TÜV-approval for pressure application. iocontrol provides the user with a fully hygienic port for connecting control instruments, gauges, sight glasses, etc..., allowing cleaning and sterilizing in place. iocontrol system is supported by the following manufacturers of instruments and special equipment: Endress + Hauser WIK LOM Fisher Rosemount (EMERSON) Papenmeier Others iocontrol allows 00% Cleaning-In-Place where typical instrument tees stay with uncleaned dead pockets. Example: Inline - Housing Example: ngle - Housing io-pharm Fittings 45

io-pharm Fittings Laterals nd Manifolds EGMO offers top quality PCW, CFOS &UHP pre-fabricated laterals & manifolds for the semiconductor industry.

Reduce number of welding on-site Reduce cost per line With new state of the art pre-fabrication plant and clean room facility EGMO offer the best quality laterals & manifolds.

46 io-pharm Fittings Laterals nd Manifolds EGMO offers top quality PCW, CFOS &UHP pre-fabricated laterals & manifolds for the semiconductor industry. Using EGMO unique D internal welding technology dead leg in laterals and manifold POC s are reduced to minimum: Reduce purge time. Reduce number of welding on-site Reduce cost per line With new state of the art pre-fabrication plant and clean room facility EGMO offer the best quality laterals & manifolds. dvantagtes Reducing field installation time by pipe contractor ll MP & EP manifold are passivated Custom designed, manufactured, and 00% tested from a single source Reduced assembly & installation costs Warranted as a single part number dvanced and Unique internal welding technology Reduced dead leg in branch Minimum weld per manifold Egmo laterals application PCW & WFI water loops ulk Gases distribution systems Specialty gases distribution systems Mini Lateral for hook up PCW Laterals 04L SCH0 Diameters: - 8 Material: 04L Standard: STM 2 CFOS Laterals 6L Diameters: -4 Material: 6L Standard: STM 269/ 270 UHP - Ultra High Purity 6L EP Diameters: - 6 Parker Valves For UHP gases Manifold outlets Weld connection Gland connection Clamp ferrule all valve Diaphragm valve Compression fittings pplications Ultra high purity gases Utility gas line laterals Process Cooling Water Short manifolds for gas cabinets 46 EGMONEUMO Ehrenberg Group

Customized Components EGMO, VNE, and NEUMO are distinguished by their unique

from special fittings, connectors, electro polished vessels and tanks with

offer a one-of-a-kind business opportunity: custom stainless steel products

Our Vessels & custom products can be designed to meet any requirement,

47 Customized Components EGMO, VNE, and NEUMO are distinguished by their unique ability to provide the highest quality stainless steel products - ranging from special fittings, connectors, electro polished vessels and tanks with the most advanced technology, and other special accessories - for a cross-industry clientele. Our abilities have developed and progressed over the years, allowing us to offer a one-of-a-kind business opportunity: custom stainless steel products and systems, manufactured according to client specifications and needs. Our Vessels & custom products can be designed to meet any requirement, including vessels, abnormal sizes, special angles, sprinklers, subsystems and many more - all in compliance with industrial regulations. io-pharm Fittings 47

io-pharm Fittings Mtr - Material Test Report The MTR is the reference document for the entire history of the production processes and the raw materials used to make the MaxPure component.

48 io-pharm Fittings Mtr - Material Test Report The MTR is the reference document for the entire history of the production processes and the raw materials used to make the MaxPure component. Vendor Warehouse Production Testing Marking Customers The MTR document is easily generated on-line via MaxPure.net using only the job number as input. The job number is the product identification number which represents all processes and raw materials related to the specific item. On-Line MTR Please, enter job/certificate number: CRETE CERTIFICTE The MTR is also available for download with QR CODE The MTR format provides the following information: Part number, part description and job number Material type Heat Number per each component describing the fitting and its associated properties: Tube dimensions and standards Chemical composition Mechanical properties Visual, dimensional, corrosion, EDDY current testing, flaring and flattening, PMI Test Certificate of Compliance 48 EGMONEUMO Ehrenberg Group

49 Technical Information Pressure service ratings for sanitary stainless steel clamps Size Tube OD MHHM(-H) MHHS F / 2 F / 2 F / 2 F / 2 F / 2 F / 2 C PSI bar PSI bar PSI bar PSI bar PSI bar PSI bar 2 & & Note: The pressure information doesn t refer to the gaskets. Gasket Material Properties Property PTFE VITON SILICON EPDM -40 to 450 F -20 to 400 F -80 to 450 F -55 to 275 F Temperature Range -40 to 22 C -29 to 204 C -62 to 22 C -48 to 5 C cid Resistance Excellent Good Good Good - excellent lkali Resistance Excellent Poor - good Poor - fair Good - excellent brasion Resistance Excellent Good Good - excellent Good - excellent Compression Set Cold flows Good - excellent Good - excellent Fair Conversion Table Of Surface Finishes Mechanical Finish µ-in. µm Grit 2 Ra 0.8 Ra Ra 0.6 Ra Ra 0.5 Ra Ra 0. Ra 20 io-pharm Fittings 49

50 io-pharm Fittings Technical Information SME PE Table DT-7- Hygienic Clamp Ferrule Standard and Tolerances Type (ccording to the SME PE 204 standard) Groove Detail E G R4 R G D F R2 R H Groove Detail C Type (ccording to the SME PE 204 standard) Groove Detail E G R R R4 R2 D F G Groove Detail C 50 EGMONEUMO Ehrenberg Group

51 SME PE - Certificate io-pharm Fittings 55

NEUMO EHRENERG GROUP GLOL LOCTIONS NEUMO GmbH+Co. KG (D) Tel: +49 (0) 704 6 0 Fax: +49 (0) 704 6 79 E-Mail: info@neumo.

52 NEUMO EHRENERG GROUP GLOL LOCTIONS NEUMO GmbH+Co. KG (D) Tel: +49 (0) Fax: +49 (0) info@neumo.de GERMNY VNE Corporation Tel: Fax: stainless@vnecorp.com U.S. EGMO Ltd. Tel: +972 (0) (0) Fax: +972 (0) salese@egmo.co.il ISREL NEUMO-EGMO Spain S.L Tel: Fax: neumo-es@neumo-es.com SPIN HPT Inc. Tel: sales@hptinc.com U.S. Herrli G Tel: +4 (0) Fax: +4 (0) info@herrli.net SWITZERLND NEUMO Polska Sp. z.o.o Tel: +48 (0) Fax: +48 (0) neumo@neumo.pl POLND NEUMO Turkey Tel: +90 (22) Fax: +90 (22) info@neumo.com.tr TURKEY NEUMO udapest Kft Tel: +6 () () Fax: +6 () neumo@neumo.hu HUNGRY NEUMO GmbH + Co. KG Tel: +84 (4) Fax: +84 (4) info@neumo.com.vn VIETNM NEUMO-VRGUS (Shanghai) Trading Co., Ltd Tel: +86 (2) Fax: +86 (2) info@neumo.com.cn CHIN NEUMO UK Ltd. Tel: +44 (0) Fax: +44 (0) stainless@neumo.co.uk UNITED KINGDOM /206 Edition: 0 EGMO Ltd. Marcom Department WH rmaturenwerke (D) Hötensleben GmbH Tel: +49 (0) Fax: +49 (0) info@awh.de Damstahl GmbH (D) Tel: +49 (0) Fax: +49 (0) ds@damstahl.de Gebr. Rieger GmbH+Co. KG (D) Tel: +49 (0) Fax: +49 (0) info@rr-rieger.de GERMNY NEUMO Tel: +5 (0) Cel: +5 (0) dosullivan@neumo.de IRELND Damstahl a/s Oslo (N) Tel: Fax: dano@damstahl.com NORWY Damstahl a/s (Denmark) Tel: +45 (0) Fax: +45 (0) ds@damstahl.com DENMRK Damstahl a/b (Sweden) Tel: Fax: SWEDEN Semiconductor io-pharm Hygienic

For Aseptic Clean Area

FLOW COMPONENTS For Aseptic Clean Area Product Range TECNIK FLUID CONTROLS is an eminent part of TECNIK group of companies. Presenting our offering of fluid flow components critical for clean area manufacturing