Centrifugal Pumps. Distributed by: 7033 Telford Way #20, Mississauga, ON L5S 1V4 Tel: Toll Free:

Transcription

1 Centrifugal Pumps Distributed by: 733 Telford Way #2, Mississauga, ON L5S 1V4 Tel: Toll Free:

2

3 Engineered For Lasting Performance Fristam is an international manufacturer of sanitary centrifugal and positive displacement pumps, mixers, and blenders, respected for unmatched product performance, reliability, and technical superiority. Fristam was founded in 199 and manufactured its first pump in Today, Fristam equipment can be found in many of the world s top beverage, brewing, bio-pharmaceutical, and food processing companies. WHY CUSTOMERS CHOOSE FRISTAM simply better pumps reliable, dependable high standards for sanitization people that help solve problems Friederich Stamp, Founder 1

4 Benchmarks of Quality Fristam centrifugal pumps run smoothly and quietly, and are the sanitary industry s leading pumps for reliability, high performance, and efficiency. LONG SEAL LIFE Fristam s unique internal seal uses the cooling and lubrication of the product to provide longer seal life. Even under extreme conditions, Fristam s seal life is often measured in years. EFFICIENT AND GENTLE Internal clearances are as tight as.5 mm, making the pumps highly efficient and very gentle on product. The optimized vane angle design of Fristam centrifugal impellers maximizes efficiency and allows for low NPSH requirements. BUILT TO LAST A Fristam centrifugal pump's housing, cover, and impeller are made from 316L stainless steel castings and forgings for more substantial mass. Due to its solid construction, a Fristam centrifugal can withstand more hydraulic shock and cavitation which can ruin a pump. 2

5 COMPLETE CIPABILITY Fristam pumps are completely CIP cleanable and meet the most stringent sanitary standards. SELF ALIGNING SHAFT A self-aligning shaft design allows for easy installation and gapping on Fristam centrifugal pumps. The concentric collar on the shaft prevents run-out, protecting the seal from damage. SIMPLE MAINTENANCE No special tools are required to perform routine maintenance on Fristam centrifugal pumps. QUIET OPERATION Close tolerances, heavy-duty construction and balanced impellers contribute to building Fristam s reputation for smooth, quiet performance....reliable, easy maintenance, very good centrifugal pump... Maintenance Planner, Pharmaceutical Facility 3

6 The Evolution of Fristam Centrifugal Pumps The FP Series is the original cast Fristam pump from 1936 that established the standards for high performance centrifugals. The success of the FP led satisfied customers to request a Fristam pump without a pedestal mount. The result was the FPX, a pump combining the same pump head with a modified mounting flange and shaft. Since its introduction in 17, the FPX has become an industry standard for most general applications. In 24, Fristam Pumps again responded to user requests for a centrifugal pump that continued the legacy of the FP and FPX, but offered a new feature to make maintenance even easier: a front-loading seal. Today, processors can choose from all three series for maximum flexibility. FP: The Original Fristam The versatile heavy-duty FP pump is the cornerstone of the Fristam line. For vacuum withdrawal from evaporators, viscous, hot or abrasive products, and many other applications, the pedestal-mounted Fristam FP Series is the benchmark for the sanitary processing industry. The FP s heavy cast iron pedestal reduces noise and vibration and helps dissipate heat. Its double mechanical seal option offers flexibility for vacuum withdrawal, aseptic processing, and abrasive products. FPX: The Industry Standard The FPX Series centrifugal pump features the same highperformance pump head as the FP. Since its introduction, the FPX has become an industry standard for most general applications. Available in single seal only, the FPX is the pump of choice for applications including product transfer; CIP supply; and pumping to fillers, separators, and heat exchangers. FP Single or Double Seal Pedestal-Mounted for Heavy Duty FPX Single Seal Only Standard Duty 4

7 FPR: Front-Loading Seal With the same great performance you've come to expect from a Fristam centrifugal, the third-generation FPR Series reduces maintenance time and effort. Designed with a front-loading seal, the FPR allows personnel to service the pump in place processors no longer need to pull pumps out of line to change seals, single or double. Simply remove the cover and impeller, and the rotating and stationary seals can be removed by hand. There is no need to disassemble the housing from the pump. LESS MAINTENANCE INVENTORY Only two seal sizes are needed to fit all FPR models (except 41, see below). For each pump model, seal size remains the same regardless of motor size. Plus, no special tools are needed for a seal change. Fristam pump shafts are designed to fit both the single and double mechanical seal arrangements. This reduces the number of shafts needed to stock for spare parts. HIGH FLOW FPR 41 For large capacity processing, the FPR 41 can achieve flow rates of up to 2 gallons/minute. Its 6-inch inlet and 14-inch impeller make it ideal for moving large amounts of non-viscous liquid. FPR Single or Double Seal All Duties Fristams are the best pumps going. Maintenance Manager, Dairy Plant 5

8 Bio-Pharmaceutical PHARMACEUTICAL OPTIONS All standard Fristam centrifugal pump stainless steel components are 316L. Special castings are available in low-ferrite stainless steel or high-performance alloys such as Hastelloy and AL-6XN. USP Class VI elastomers are standard for pharmaceutical applications, with perfluoroelastomers available. Seal materials include stainless steel, ceramic, silicon carbide, and tungsten carbide. Electropolishing and enhanced internal surface finishes to 15 Ra are available on most products. Casing drain and mounting options provide complete drainability critical for long-term system cleanliness. Pumps can be easily configured for steam-in-place sterilization, with no external cooling devices required. WATER FOR INJECTION (WFI) PUMPS Fristam is the industry leader for WFI and other high purity service. Fristam WFI centrifugal pumps are a precision adaptation of our FP, FPX, and FPR pumps. They feature an advanced seal design that protects product sterility, saves valuable product and provides for long seal life. Fristam pioneered a pressurized double seal flush system that maintains positive pressure in the critical seal area to ensure product sterility and prevent flashing. The front seal flush is a recirculation loop, which saves valuable product. The internal seal design provides extra cooling and lubrication on the front seal face to significantly extend seal life and provide for more system uptime. Numerous seal and piping configurations, including single seal piping, are available to meet your processing requirements. front seal flush flow additional double seal flush flow (optional) Option 'B' shown. Please visit for more configurations) Front Seal Flush Double Seal Flush Media Gaskets Stationary Seal Rotating Seal O-rings Springs 6

9 Centrifugal Options SEAL MATERIALS 1st Rotating 2nd Stationary 3rd Flush (Double) Seal [FP and FPR only] Single Seal FR-N Chrome oxide SS vs. carbon C-C Silicon carbide vs. silicon carbide FR-C Chrome oxide SS vs. silicon carbide Double Seal [FP and FPR only] FR-N-K Chrome oxide SS vs. carbon vs. ceramic C-C-K Silicon carbide vs. silicon carbide vs. ceramic FR-C-K Chrome oxide SS vs. silicon carbide vs. ceramic FITTING TYPE Clamp Bevel seat 15# flange 3# flange NPT Butt weld I-Line (female) Others FINISH AND MATERIAL OPTIONS 32 Ra 25 Ra 2 Ra 15 Ra Electropolish Passivation Tungsten carbide coating 316L low ferrite ELASTOMERS Viton EPDM Buna cover gasket Perfluoroelastomer USP Class VI Viton and EPDM COMPREHENSIVE DOCUMENTATION PACKAGE Fristam offers the most comprehensive documentation package, with complete traceability of all parts, including elastomers. Certified Drawings Mill Certification Material Verification Conformance Warranty Statement Certified Finish Passivation of Pump Stainless Steel Tag Paper Location Tag Certified Welding Hydrostatic Test Dynamic Seal Test Short Run Test Performance Test NPSH Test Witness Test Vibration Test Ferrite Test HARDWARE OPTIONS Stainless steel flange Aseptic Jacketed housing Casing drain Bearing block mounted Adjustable base with legs Impeller inducer 7

10 Composite Performance Curves FRISTAM CENTRIFUGAL PUMPS FP & FPX 175 RPM FP & FPX 35 RPM BAR FT. OF HEAD BAR FT. OF HEAD GPM GPM LPM LPM FP & FPX 175 RPM BAR FT. OF HEAD GPM LPM Based on tests using 7 F water and psig inlet pressure. A tolerance of ± 5% applies to all figures. Actual performance may vary by application product. Please contact Fristam for different conditions. 8

11 FRISTAM CENTRIFUGAL PUMPS FPR 175 RPM FPR 35 RPM BAR FT. OF HEAD BAR FT. OF HEAD GPM GPM LPM LPM FPR 175 RPM FPR 35 RPM BAR FT. OF HEAD BAR FT. OF HEAD GPM GPM LPM LPM Based on tests using 7 F water and psig inlet pressure. A tolerance of ± 5% applies to all figures. Actual performance may vary by application product. Please contact Fristam for different conditions. 9

12 BALDOR Dimensional Drawing: FPX Single Flange ØG ØP F K Q M PUMP MODEL FPX 71 / 72 FPX 711 / 712 FPX 721 / 731 / 722 FPX 741 / 732 / 742 FPX 3541 / 3542 FPX 3451 / 3452 FPX 3551 N 2.5" FPX 1741 / 1732 / " FPX 3521 / " FPX 3531 / " 3" 3" 3" D 2.5" 2.5" C INLET OUTLET INLET 144 (5.67") 17 (6.69") 195 (7.68") 2 19 (7.48") (7.5) 211 (8.31") 211 (8.31") 231 (9.9") OUTLET A H (3.88") () MAX. ADJ. 58 (2.28") 79 (3.11") 96 (3.78") 91 (3.58") 8 (3.15") 95 (3.74") 115 (4.53") (5.51") (5.51") 113 (4.45") 113 (4.45") 11 (3.") 14 (4.9") 118 (4.64") (4.55") 118 (4.64") (4.49") 119 (4.68") J 15 (5.9") 15 (5.9") 141 (5.55") 15.5 (5.93") 162 (6.") 162 (6.") 162 (6.") 158 (6.2) 168 (6.61") L B ØE DIMENSIONS IN MILLIMETERS (INCHES) A B C D ØE 18 (4.25") 44.5 (1.75") 18.5 (4.27") (5.77") 15 (5.9") 185 (7.28") 23 (9.6") 27 (1.63") 27 (1.63") 23 (9.6") 26 (1.24") 29 (11.4) 35 (13.78") 35 (13.78") ADJ. LEGS (OPTIONAL) il-657 MOTOR HP MOTOR 175 RPM 35 RPM FRAME 1 HP 1.5 HP 143TC 1.5 HP 145TC 2 HP 2 HP 145TC 3 HP 5 HP 7.5 HP 1 HP 15 HP 2 HP 3 HP 5 HP 7.5 HP 1 HP 15 HP 2 HP 182TC 182TC 184TC 184TC 184TC 213TC 215TC 215TC 254TC 256TC 256TC F 281 (11.6") 281 (11.6") 281 (11.6") 313 (12.31") 348 (13.69") 347 (13.68") 6 (15.18") 6 (15.18") 8 (15.27") 8 (15.27") 436 (17.15") 447 (17.59") 491 (19.34") 499 (19.66") ØG (8.5") (8.5") (8.5") (1.34") (1.34") (1.34") (1.34") (1.34") 336 (13.25") H 89 (3.5") 89 (3.5") 89 (3.5") (4.5") (4.5") (4.5") (4.5") (4.5") (5.25") (5.25") (5.25") 159 (6.25") 159 (6.25") 159 (6.25") DIMENSIONS IN MILLIMETERS (INCHES) J L M N Q 12 (5.2) (5.5") (4.7) (14.") (5.2) (5.2) 132 (5.21") 132 (5.21") 152 (5.97") 152 (5.97") 152 (5.97") 189 (7.46") 189 (7.46") 189 (7.46") 225 (8.88") 225 (8.88") 239 (9.4) K 12 (4.") 12 (4.") 12 (4.") (5.5") (5.5") (5.5") (5.5") (5.5") (5.5") (5.5") (5.5") 21 (8.25") 254 (1.") 254 (1.") (5.5") (5.5") (7.5") (7.5") (7.5") (7.5") (7.5") (8.5") (8.5") (8.5") 254 (1.") 254 (1.") 254 (1.") 7 () 7 () 7 () 89 (3.5") 89 (3.5") 89 (3.5") 89 (3.5") 89 (3.5") 18 (4.25") 18 (4.25") 18 (4.25") 121 (4.75") 121 (4.75") 121 (4.75") 12 (4.7) 12 (4.7) (5.53") (5.53") (5.53") (5.53") (5.53") (5.53") (5.53") (5.53") 169 (6.65") 169 (6.65") 169 (6.65") ØP 8.7 (11/3) 8.7 (11/3) 8.7 (11/3) 1.3 (13/3) 1.3 (13/3) 1.3 (13/3) 1.3 (13/3) 1.3 (13/3) 1.3 (13/3) 1.3 (13/3) 1.3 (13/3) (17/3) (17/3) (17/3) (14.") (14.") (14.") (14.") (14.") (14.") (14.") (14.") (14.") (14.") 46 (16.") 46 (16.") 46 (16.") Dimensional Drawing: FPX Double Flange ØJ H Q D PUMP MODEL INLET OUTLET DIMENSIONS IN MILLIMETERS (INCHES) MOTOR HP MOTOR DIMENSIONS IN MILLIMETERS (INCHES) C A L B CB D OUTLET ØE 175 RPM 35 RPM FRAME H ØJ K L M N P FPX 151 4" 4" (9.84") (6.69") (6.57") (7.97") (15.") 7.5 HP 213TC (15.27") (1.34") (5.25") (7.46") (5.5") (8.5") (4.25") FPX " INLET 4" 25 (9.84") 17 (6.69") 11.5 (4.35") 146 (5.75") 46 (15.") A 1 HP 215TC 416 (16.4") (1.34") (5.25") 189 (7.46") 178 (7.") (8.5") 18 (4.25") FPX " 4" 25 (9.84") 17 (6.69") 11.5 (4.35") 146 (5.75") 46 (15.") 15 HP 254TC 447 (17.59") 27 (1.6) 159 (6.25") 226 (8.88") 21 (8.25") 254 (1.") 121 (4.75") FPX " 4" 25 (9.84") 17 (6.69") 111 (4.37") 146 (5.75") 46 (15.") 2 HP 256TC 499 (19.66") 32 (12.6") 159 (6.25") 239 (9.4) 254 (1.") 254 (1.") 121 (4.75") FPX 1742 K ØE " 25 HP 284TC (3.58") (4.9") (6.) (1.63") (23.13") (14.44") (7.") (13.11") (9.5") (11.") (4.75") FPX " (7.5) 95 (3.74") (4.55") (6.48") 26 (1.24") 25 HP 284TSC 588 (23.13") 367 (14.44") 178 (7.") 333 (13.11") 241 (9.5") 279 (11.") 121 (4.75") ØR FPX " (4.6) " (8.31") (4.53") ADJ. LEGS 3 HP 286TC (4.64") (6.48") (11.4) (23.13") (14.44") (7.") (13.11") (11.") (11.") (4.75") 211 (OPTIONAL) M P FPX " 3 HP 286TSC 44.5 (1.75") (8.31") (5.51") N (4.49") (6.3) il-661(13.78") (23.13") (14.44") (7.") (13.11") (11.") (11.") (4.75") S MAX. ADJ FPX " 2.5" 4 HP 324TC (9.9") (5.51") (4.68") (6.71") (13.78") (25.") (16.25") (8.") (14.6) () (12.5") (5.25") HP 324TSC (25.") (16.25") (8.") (14.6) () (12.5") (5.25") HP 326TC (25.") (16.25") (8.") (14.6) (12.") (12.5") (5.25") PUMP MODEL INLET OUTLET DIMENSIONS IN MILLIMETERS (INCHES) MOTOR HP MOTOR 5 HP DIMENSIONS 326TSC IN MILLIMETERS (INCHES) A B C D ØE 175 RPM 35 RPM FRAME H ØJ K L (25.") M(16.25") N (8.") P (14.6) Q(12.") ØR(12.5") S (5.25") FPX 151 4" 4" (9.84") (6.69") (6.57") (7.97") (15.") 7.5 HP 213TC (15.27") (1.34") (5.25") (7.46") (5.5") (8.5") (4.25") (13/3) (18.5") FPX " 4" (9.84") (6.69") (4.35") (5.75") (15.") 1 HP 215TC (16.4") (1.34") (5.25") (7.46") (7.") (8.5") (4.25") (13/3) (18.5") FPX " 4" (9.84") (6.69") (4.35") (5.75") (15.") 15 HP 254TC (17.59") (1.6) (6.25") (8.88") (8.25") (1.") (4.75") (17/3) (17.5") FPX " 4" (9.84") (6.69") (4.37") (5.75") (15.") 2 HP 256TC (19.66") (12.6") (6.25") (9.4) (1.") (1.") (4.75") (17/3) (18.5") FPX " (3.58") (4.9") (6.) (1.63") 25 HP 284TC (23.13") (14.44") (7.") (13.11") (9.5") (11.") (4.75") (17/3) (17.5") FPX " (7.5) (3.74") (4.55") (6.48") (1.24") 25 HP 284TSC (23.13") (14.44") (7.") (13.11") (9.5") (11.") (4.75") (17/3) (17.5") FPX " 2.5" (8.31") (4.53") (4.64") (6.48") (11.4) 3 HP 286TC (23.13") (14.44") (7.") (13.11") (11.") (11.") (4.75") (17/3) (17.5") FPX " (8.31") (5.51") (4.49") (6.3) (13.78") 3 HP 286TSC (23.13") (14.44") (7.") (13.11") (11.") (11.") (4.75") (17/3) (17.5") FPX " 2.5" (9.9") (5.51") (4.68") (6.71") (13.78") 4 HP 324TC (25.") (16.25") (8.") (14.6) () (12.5") (5.25") (8.5") (21/3) (18.5") HP 324TSC (25.") (16.25") (8.") (14.6) () (12.5") (5.25") (8.5") (21/3) (18.5") HP 326TC (25.") (16.25") (8.") (14.6) (12.") (12.5") (5.25") (8.5") (21/3) (18.5") HP 326TSC (25.") (16.25") (8.") (14.6) (12.") (12.5") (5.25") (8.5") (21/3) (18.5") il-66 All pump dimensions are in millimeters (inches). Dimensions are based on clamp fittings. Motor dimensions may vary by manufacturer. Q (8.5") (8.5") (8.5") (8.5") ØR 1.3 (13/3) 1.3 (13/3) (17/3) (17/3) (17/3) (17/3) (17/3) (17/3) 16.7 (21/3) 16.7 (21/3) 16.7 (21/3) 16.7 (21/3) S 47 (18.5") 47 (18.5") 444 (17.5") 47 (18.5") 444 (17.5") 444 (17.5") 444 (17.5") 444 (17.5") 47 (18.5") 47 (18.5") 47 (18.5") 47 (18.5") il-66 1

13 BALDOR Dimensional Drawing: FP Single Flange ØK J 1 (7.8") (3.88") 36(1.4) X 16(.63") SLOT 18 (7.9") F (4 PLACES) () (14.") E MAX. ADJ. PUMP MODEL INLET OUTLET FP 71 / 72 FP 711 / 712 FP 721 / 731 / 722 FP 741 / 732 / 742 FP 1741 / 1732 / 1742 FP 3521 / 3522 FP 3531 / 3532 FP 3541 / " 2.5" 2.5" 3" 2.5" 2.5" FP 3451 / " A 18 (4.25") 144 (5.67") 17 (6.69") 195 (7.68") 2 19 (7.48") (7.5) 211 (8.31") 211 (8.31") 96 (3.78") 91 (3.58") 8 (3.15") 95 (3.74") 115 (4.53") (5.51") D C 11 (3.") 14 (4.9") 118 (4.64") (4.55") 118 (4.64") (4.49") A 18 (7.9") D (5.77") 15 (5.9") 15 (5.9") 141 (5.55") 15.5 (5.93") 162 (6.") 162 (6.") 162 (6.") 158 (6.2) INLET 149 (5.87") (6.24") 17 (6.69") 17 (6.69") 17 (6.69") 166 (6.54") H 21 (8.27") 23 (8.") HP 215TC (7.46") (15.27") (1.34") Dimensional Drawing: FP Double Flange 1 HP 15 HP 215TC B ØG ADJ. LEGS (OPTIONAL) (7.34") 19 (7.48") 19 (7.48") 181 (7.13") 19.5 (7.5") 22 (7.95") 22 (7.95") 22 (7.95") 1 (7.8") REV- DIMENSIONS IN MILLIMETERS (INCHES) B C E F ØG 44.5 (1.75") 58 (2.28") 79 (3.11") 18.5 (4.27") 113 (4.45") 113 (4.45") (6.8") 158 (6.2) 158 (6.2) 15 (5.9") 185 (7.28") 23 (9.6") 27 (1.63") 27 (1.63") 23 (9.6") 26 (1.24") 29 (11.4) 35 (13.78") OUTLET MOTOR HP MOTOR FRAME 175 RPM 35 RPM.75 HP 1 HP 1.5 HP 2 HP.5 HP.75 HP 1 HP 1.5 HP 2 HP 3 HP 56C 56C 56C 143TC 145TC 145TC 145TC H 115 (4.53") 115 (4.53") 115 (4.53") 115 (4.53") (5.2) (5.2) (5.2) (5.23") 152 (6.") 152 ØK (6.") 157 (6.19") 189 (7.46") 157 (6.19") 189 (7.46") 157 (6.19") 189 (7.46") 157 (6.19") (8.5") (8.5") 3 HP 182TC DIMENSIONS IN MOTOR HP MOTOR 5 HP MILLIMETERS 5 HP 184TC (INCHES) FRAME 175 RPM 35 RPM H J.5 HP 56C HP TC (4.53") (9.29").75 HP.75 HP 7.5 HP HP TC 56C (4.53") (9.29") 1 HP 56C HP TC (4.53") (9.29") 1 HP 1.5 HP 1 HP HP TC 143TC (4.53") (9.94") 1.5 HP 145TC 259 (5.2) (1.19") 2 HP 2 HP 145TC 284 (5.2) (11.19") 3 HP 145TC 284 (5.2) (11.19") 3 HP 182TC 313 (5.23") (12.31") 5 HP 5 HP 184TC (6.") (13.68") 7.5 HP 184TC (6.") (15.18") 7.5 HP 7.5 HP 213TC (7.46") (15.27") (7.46") (16.4") DIMENSIONS IN MILLIMETERS (INCHES) (8.5") (1.34") (1.34") REV- J 236 (9.29") 236 (9.29") 236 (9.29") 252 (9.94") 259 (1.19") 284 (11.19") 284 (11.19") 313 (12.31") 348 (13.68") 6 (15.18") 8 (15.27") 8 (15.27") 416 (16.4") ØK 157 (6.19") 157 (6.19") 157 (6.19") 157 (6.19") (8.5") (8.5") (8.5") (1.34") (1.34") (1.34") REV- J L D DIMENSIONS IN MILLIMETERS (INCHES) MOTOR HP MOTOR DIMENSIONS IN MILLIMETERS (INCHES) PUMP MODEL INLET OUTLET H B C A B C OUTLET D E F ØG 175 RPM 35 RPM FRAME H J ØK L M N FP 151 4" 4" (9.84") (6.69") (6.57") (7.97") (1.") (12.5") (15.") * 3 HP 182TC (5.23") (12.31") (8.5") (4.6) (1.75") FP 1151 INLET A " 4" (9.84") (6.69") (4.35") (5.75") (7.78") (1.28") (15.") *5 HP 213TC (7.46") (15.27") (1.34") (4.6) (1.75") ØK FP " 4" (9.84") (6.69") (4.35") (5.75") (7.78") (1.28") (15.") ** 7.5 HP 213TC (7.46") (15.27") (1.34") (4.6) (1.75") FP " ØE (9.84") (9.84") (6.69") (4.37") (5.75") (7.78") (1.28") (15.") ** 1 HP 215TC (7.46") (16.4") (1.34") (4.6) (1.75") FP " *** M (7.68") (3.78") (11.4) (3.") (5.65") (1.63") 15 HP 254TC **** (7.68") (1.18") (8.67") (16.33") (1.34") (3.88") () *** FP 1732 / " ADJ. BASE 2 HP 256TC **** 3 (3.58") (4.9") (6.) (8.5") (1.55") (1.63") (9.4) (19.66") (13.25") (3.88") () 19(.75") X 35(1.") SLOT (11.81") F N (OPTIONAL) (4 PLACES) 559 FP " 3 (22.") E (7.5) (3.74") (4.55") (6.48") (8.5") (11.") (1.24") 2 HP 256TC (8.88") (19.34") (1.34") (3.88") () (11.81") FP " 2.5" (8.31") (4.53") (4.64") (6.48") (8.5") (11.") (11.4) 25 HP 284TC (13.1) (23.13") (15.56") (4.6) (1.75") FP " REV (8.31") (5.51") (4.49") (6.3) (8.35") (1.85") (13.78") 25 HP 284TSC (13.1) (23.13") (15.56") (3.88") () FP 3551 / " 2.5" (9.9") (5.51") (4.68") (6.71") (8.74") (11.24") (13.78") 3 HP 286TC (13.1) (23.13") (15.56") (4.6) (1.75") HP 286TSC (13.1) (23.13") (15.56") (3.88") () DIMENSIONS IN MILLIMETERS (INCHES) MOTOR HP MOTOR DIMENSIONS IN MILLIMETERS (INCHES) PUMP MODEL INLET OUTLET A B C D E F ØG 175 RPM 35 RPM FRAME H4 HP J ØK324TSDL (13.1) M (23.13") N (15.56") (8.66") (4.6) (1.75") FP 151 4" 4" (9.84") (6.69") (6.57") (7.97") (1.") (12.5") (15.") * 3 HP 182TC (5.23") (12.31") 4 HP(8.5") 324TSD (4.6) (1.75") (13.1) (23.13") (15.56") (8.66") (4.6) (1.75") FP " 4" (9.84") (6.69") (4.35") (5.75") (7.78") (1.28") (15.") *5 HP 213TC (7.46") 5 HP(15.27") (1.34") 326TSD (4.6) (1.75") (13.1) (23.13") (15.56") (8.66") (4.6) (1.75") FP " 4" (9.84") (6.69") (4.35") (5.75") (7.78") (1.28") (15.") ** 7.5 HP 213TC (7.46") (15.27") 5 HP (1.34") 326TSD (4.6) (1.75") (13.1) (23.13") (15.56") (8.66") (4.6) (1.75") FP " 4" (9.84") (6.69") (4.37") (5.75") (7.78") (1.28") (15.") ** 1 HP 215TC (7.46") * 3551 (16.4") ONLY (1.34") (4.6) (1.75") REV- ** 3551, 151 & 1151 ONLY *** 117 (4.6) 415 FOR 151, & 1161 *** FP " (7.68") (3.78") (3.") (5.65") (1.63") 15 HP 254TC **** (7.68") (1.18") (8.67") **** 44.5 (16.33") (1.75") FOR (1.34") 151, 1151 & 1161 (3.88") () FP 1732 / " *** 2 HP 256TC **** (3.58") (4.9") (6.) (8.5") (1.55") (1.63") (9.4) (19.66") (13.25") (3.88") () FP " (7.5) (3.74") (4.55") (6.48") (8.5") (11.") (1.24") 2 HP 256TC (8.88") (19.34") (1.34") (3.88") () FP " 2.5" (8.31") (4.53") (4.64") (6.48") (8.5") (11.") (11.4) 25 HP 284TC (13.1) (23.13") (15.56") (4.6) (1.75") FP " (8.31") (5.51") (4.49") (6.3) (8.35") (1.85") (13.78") 25 HP 284TSC (13.1) (23.13") (15.56") (3.88") () FP 3551 / " 2.5" (9.9") (5.51") (4.68") (6.71") (8.74") (11.24") (13.78") 3 HP 286TC (13.1) (23.13") (15.56") (4.6) (1.75") 3 HP TSC (13.1) (23.13") (15.56") (3.88") () 4 HP TSD (13.1) (23.13") (15.56") (8.66") (4.6) (1.75") 4 HP TSD (13.1) (23.13") (15.56") (8.66") (4.6) (1.75") 11 5 HP TSD (13.1) (23.13") (15.56") (8.66") (4.6) (1.75") 5 HP TSD (13.1) (23.13") (15.56") (8.66") (4.6) (1.75")

14 8 5" 8 5" 8 5" 8 5" 8 5" 12 Dimensional Drawing: FPR Single Flange M L Ø V Q W Z S T D C Inlet Adjustable Legs (Optional) V W X Y Z PUMP MODEL INLET OUTLET A B C D E FPR 71/72.34" 2.25" 4.25" 1.75" 4.19" 5.49" 5.91" FPR 711/712.34" 2.25" 5.67" 2.28" 4.45" 5.71" 7.28" FPR 721/731/722.34" 2.25" 6.69" 3.11" 4.45" 5.71" 9.6" FPR 741/ ".41" 7.68" 3.78" 3." 5.35" 1.63" FPR 1741/ ".41" 7.87" 3.58" 4.9" 5.73" 1.63" FPR 3521/ ".41" 7.48" 3.15" 4.65" " FPR 3531/ ".41" " 4.55" " FPR 3541/3542 3" 2.5".41" 8.31" 4.53" 4.65" " 3.5" " 3.5" " 3.5" " 3.5" E P R B Rev A.53" 16" 4.25" Dimensional Drawing: FPR Double Flange " 16" 4.25" " 16" 4.25" " 17.5" 4.63" 1.75" 4.75" " 17.5" 4.63" 1.75" 4.75" " 17.5" 4.63" 1.75" 4.75" " 17.5" 4.63" 1.75" 4.75" " 18.5" 4.63" 1.75" 5.25" " 18.5" 4.63" 1.75" 5.25" " 18.5" 4.63" 1.75" 5.25" " 18.5" 4.63" 1.75" 5.25" M T V W X Y Z " " " " " ".41" 3.5" ".41" 3.5" ".41" 3.5" ".53" 16" 4.25" ".53" 16" 4.25" ".53" 16" 4.25" " 6.85".53" 17.5" 4.63" 1.75" 4.75" " 6.85".53" 17.5" 4.63" 1.75" 4.75" " 6.85".53" 17.5" 4.63" 1.75" 4.75" " 6.85".53" 17.5" 4.63" 1.75" 4.75" " 8.23".66" 18.5" 4.63" 1.75" 5.25" L Ø V Q W Z S PUMP MODEL INLET OUTLET A FPR 751/752 3" FPR 3451/3452 3" FPR 3551/3552 3" 2.5" FPR 151 4" 4" FPR " 4" T D C " " " " " Inlet Adjustable Legs (Optional) B C D E " 5.51" 5.51" " " " 4.49" " " " Ø E P " " " " " " " " R B Outlet Y Max. Leg Adjustment A N X Outlet A N X Y Max. Leg Adjustment Rev C MOTOR HP 175 RPM 35 RPM MOTOR FRAME 1 HP 1.5 HP 143TC 1.5 HP 145TC 2 HP 2 HP 145TC 3 HP 182TC 3 HP 182TC 5 HP 184TC 5 HP 184TC 7.5 HP 184TC 7.5 HP 213TC 1 HP 215TC 1 HP 215TC 15 HP 215TC 15 HP 254TC 2 HP 256TC 2 HP 256TC 25 HP 284TSC 25 HP 284TC 3 HP 286TSC 3 HP 286TC 4 HP 324TSC 4 HP 324TC 5 HP 326TSC 5 HP 326TC MOTOR HP 175 RPM 35 RPM 3 5 HP HP MOTOR FRAME 3 HP 182TC 182TC 5 HP 184TC 184TC 7.5 HP 184TC 7.5 HP 213TC 1 HP 1 HP 215TC 15 HP 215TC 15 HP 254TC 2 HP 256TC 2 HP 256TC 25 HP 284TC 25 HP 284TSC 3 HP 286TC 3 HP 286TSC 4 HP 324TC 4 HP 324TSC 5 HP 326TC 5 HP 326TSC 6 HP 364TC 6 HP 364TSC 75 HP 365TC 75 HP 365TSC L M N P Q R S T V W X Y Z PUMP " 6.89" 3.5" 5.25" 4" 5.5" 5" " 2.25" " 6.89" 3.5" 5.25" 5" 5.5" 5" " 2.25" " 6.89" 3.5" 5.25" 5" 5.5" 5" " 2.25" " 8.7" 4.5" 5.87" 4.5" 7.5" 4.25" 6.65".41" " 8.7" 4.5" 5.87" 4.5" 7.5" 4.25" 6.65".41" " 8.7" 4.5" 5.87" 5.5" 7.5" 4.25" 6.65".41" " 8.7" 4.5" 5.87" 5.5" 7.5" 4.25" 6.65".41" " 8.7" 4.5" 5.87" 5.5" 7.5" 4.25" 6.65".41" " 1.25" 5.25" 7." 5.5" 8.5" 4.25" 6.65".41" 3.5" " 1.25" 5.25" 7." 7" 8.5" 4.25" 6.65".41" 3.5" " 1.25" 5.25" 7." 7" 8.5" 4.25" 6.65".41" 3.5" " 1.25" 5.25" 7." 7" 8.5" 4.25" 6.65".41" 3.5" " 12.87" 6.25" 9.63" 8.25" 1" 4" 6.65".53" 16" 4.25" " 12.87" 6.25" 9.63" 1" 1" 4" 6.65".53" 16" 4.25" " 12.87" 6.25" 9.63" 1" 1" 4" 6.65".53" 16" 4.25" " 14.63" 7" 13.13" 9.5" 11" 4.75" 7.5".53" 17.5" 4.63" 1.75" 4.75" " 14.63" 7" 13.13" 9.5" 11" 4.75" 7.5".53" 17.5" 4.63" 1.75" 4.75" " 14.63" 7" 13.13" 11" 11" 4.75" 7.5".53" 17.5" 4.63" 1.75" 4.75" " 14.63" 7" 13.13" 11" 11" 4.75" 7.5".53" 17.5" 4.63" 1.75" 4.75" " 16.5" 8" 14.13" 12.5" 4.75" 7.5".66" 18.5" 4.63" 1.75" 5.25" " 16.5" 8" 14.13" 12.5" 4.75" 7.5".66" 18.5" 4.63" 1.75" 5.25" " 16.5" 8" 14.13" " 4.75" 7.5".66" 18.5" 4.63" 1.75" 5.25" " 16.5" 8" 14.13" " 4.75" 7.5".66" 18.5" 4.63" 1.75" 5.25" L M N P Q R S T V W " " " " " " " 4.5" 4.5" 4.5" 4.5" 4.5" " " " " " 4.5" 4.5" 5.5" 5.5" 5.5" 7.5" 7.5" 7.5" 7.5" 7.5" " " " " " " " " " " " 1.25" 5.25" 7." 5.5" 8.5" 4.25".41" 3.5" " 1.25" 5.25" 7." 7" 8.5" 4.25".41" 3.5" " 1.25" 5.25" 7." 7" 8.5" 4.25".41" 3.5" " 12.87" 6.25" 9.63" 8.25" 1" 4".53" 16" 4.25" " 12.87" 6.25" 9.63" 1" 1" 4".53" 16" 4.25" " 12.87" 6.25" 9.63" 1" 1" 4".53" 16" 4.25" " 14.63" 7" 13.13" 9.5" 11" 4.75" 6.85".53" 17.5" 4.63" 1.75" 4.75" " 14.63" 7" 13.13" 9.5" 11" 4.75" 6.85".53" 17.5" 4.63" 1.75" 4.75" " 14.63" 7" 13.13" 11" 11" 4.75" 6.85".53" 17.5" 4.63" 1.75" 4.75" " 14.63" 7" 13.13" 11" 11" 4.75" 6.85".53" 17.5" 4.63" 1.75" 4.75" " 16.5" 8" 14.13" 12.5" 4.75" 8.23".66" 18.5" 4.63" 1.75" 5.25" " 16.5" 8" 14.13" 12.5" 4.75" 8.23".66" 18.5" 4.63" 1.75" 5.25" " 16.5" 8" 14.13" " 4.75" 8.23".66" 18.5" 4.63" 1.75" 5.25" " 16.5" 8" 14.13" " 4.75" 8.23".66" 18.5" 4.63" 1.75" 5.25" " 18.5" 9" 15.6" 11.25" 3.5" 8.23".66" 5" 1.75" 5.87" " 18.5" 9" 15.6" 11.25" 3.5" 8.23".66" 5" 1.75" 5.87" " 18.5" 9" 15.6" 12.25" 3.5" 8.23".66" 5" 1.75" 5.87" " 18.5" 9" 15.6" 12.25" 3.5" 8.23".66" 5" 1.75" 5.87" X Y Z FPR FPR FPR 7 FPR FPR 1 FPR 3 FPR 3 FPR 3 PUM FPR FPR FPR FP FP

15

16 CENTRIFUGAL POSITIVE DISPLACEMENT MIXING & BLENDING Fristam Pumps USA 241 Parview Road Middleton, WI Tel Fax fristam@fristampumps.com Part # Fristam Pumps USA