HYDRO 9 B. Technical features
|
|
- Basil George
- 5 years ago
- Views:
Transcription
1 HYDRO HYDRAULIC POWER PACKS HYDRO 5.5-B Engine: gasoline Honda 5,5 Hp. Manual starter Max. capacity:10 lt/1. Oil tank: 4 lt. Dimensions: 760x590x650 mm. Weight: 30 kg. HYDRO 9 B HYDRO 5.5-B Variable-displacement adjuster lt. HYDRO 9 B Engine: gasoline Honda 9 HP Manual starter Max. capacity: 20 l/min. Max. pressure: 120 bar Oil tank: 4 l Dimensions: 650x590x650 mm Weight: 65 kg HYDRO 13 B Engine: gasoline Honda 13 HP Manual starter Max. capacity: 20/25/30 l/min. Max. pressure: 140 bar Oil tank: 10 l Dimensions: 720x570x680 mm Weight: 79 kg HYDRO 13 B - 13 BX HYDRO 13 BX Engine: gasoline Honda 13 Hp. Electric starter Max. capacity:20/25/30 lt/1. Max. pressure: 140 bar. Oil tank: 10 lt. Dimensions: 720x570x680 mm. Weight: 80 kg. THE BEST FOR YOUR MANUAL HYDRAULIC TOOLS! HYDRO 16 BX - 16 DX HYDRO 16 BX Engine: gasoline B&S 16 Hp. Electric starter Max. capacity:: 30 lt/1. Oil tank: 10 lt. Dimensions: 840x610x740 mm. Weight: 92 kg. HYDRO 16 DX Motore: diesel Hatz 16 Hp. Electric starter Max. capacity: 30 lt/1. Oil tank: 12 lt. Dimensions: 850x610x800 mm. Weight: 150 kg. 40
2 HYDRO 9,2 E HYDRO 9,2 E Engine: electric 380 V 12.5 HP kw Pushbutton starter Max. capacity: 30 l/min. Max. pressure: 160 bar Oil tank: 18 l Dimensions: 650x470x1090 mm Weight: 110 kg All the hydraulic power packs are supplied ready to be used, because they are already equipped with a set of 10m-long hydraulic hoses complete with fast couplings. Upon request, they can be equipped with automatic accelerator (apart from the version with electric motor). UPON REQUEST, THEY CAN BE EQUIPPED WITH SPECIAL FEATURES, PERFORMANCES AND ACCESSORIES. Model U.M. HYDRO HYDRO HYDRO HYDRO HYDRO HYDRO B 9 B 13 B - 13 BX 16 BX 16 DX 9,2 E Engine Gasoline Gasoline Gasoline Gasoline Diesel Electric 380V Power Hp/kW 5,5 9/6,5 13/9,5 16/12 16/12 12,5/9,2 Max. delivery lt/min /25/ Max. pressure. bar Supplied Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic material hoses hoses hoses hoses hoses hoses Flow limiting valve It makes it possible to connect the tools to hydraulic sources with higher delivery and pressure values than the tolerated ones. The excessive hydraulic oil is drained. Delivery and pressure limiting valve at 20 l It makes it possible to connect the tools to hydraulic sources with delivery and pressure values higher than 20 l/min or 30 lt/min.. The excessive hydraulic oil is drained. Flow dividing valve It makes it possible to use two tools at the same time, even with a single hydraulic source and a single connector. This is possible if the produced delivery and pressure are enough for both the connected tools. Delivery and pressure gauge This tool is useful to check the delivery and pressure values of any hydraulic circuit. Nitrogen charge meter It makes it possible to check the nitrogen pressure value in the accumulators of wrecking hammers. ACCESSORIES WATER 1 pump It guarantees the suffient pressure of cooling water while using diamond tools. WATER 2 pump It guarantees the suffient pressure of cooling water while using diamond tools. As it is activated by a small expolosion engine, it is completely indipendent. Set of hydraulic hoses 5 m 10 m OPTIONAL ACCESSORIES THAT CAN BE ONLY INSTALLED WHEN BUYING THE CENTRAL UNIT Flow accelerator Flow variator 20/30 l Options for the versions 13 B - 13 BX - 16 BX - 16 DX - 9,2 E - 15 E Auxiliary coupling for the 20-l water tool It allows to use two 20-l water tools at the same time by using a combined pump (i.e. BH112 hammers). Option only for the versions 16 BX - 16 DX - 15 E. 41
3 BH/DH HYDRAULIC WRECKING HAMMERS BH 112 BH 050 BH Kg 11 Light chisel and wrecking hammer Ideal for all the works of small demolition and wall and floor finishing. 2 hoses length 50 cm with couplings Side handle THE MOST RELIABLE BH Kg 5,3 Super light chisel Ideal for all the works of small demolition and wall and floor finishing. Highly versatile. Side handle BH Kg 16 Ideal for cutting in asphalt and for the maintenance of urban nets. Upon request, for models BH 163 and BH 230 we can supply anti-vibration handles to reduce vibrations on the operator arm, but maintaining a good handiness of the wrecking hammer. BH 151 BH 063 BH 161V BH 161V - Kg 17,3 ANTIVIBRATION with anti-vibration handle Ideal for cutting in asphalt and for the maintenance of urban nets. ACCESSORIES Complete tamper Conic bit Little spade Chisel Helicoidal bit for DH
4 BH Kg 23 Professional wrecking hammer Ideal for demolition works and cutting asphalt. BH Kg 28 Professional wrecking hammer Ideal for all works where high performances are requested. BH 230 DH 203 DH Kg 20 Perforator drill and wrecking hammer For drilling easily materials like stone, cement, bricks, etc. ACCESSORIES FOR DH Hexagonal connection 22 x 108 Length To be used also singularly with the crown 1 - Dry crown Ø mm Model U.M. BH 050 BH 112 BH 151 BH 161V BH 163 BH 201 BH 280 DH 203 antivibrante Weight kg 5, , Dimensions mm 442x x x x x x x x355 Frequency c/min 2000/ / / / / / /1850 Stroke energy J Delivery lt/min , Ideal pressure bar Hex. coupling mm 19x50 22x82 25x108 25x108 25x108 32x160 32x160 22x108 Max. drill. depth mm Max. drill. diam. mm
5 MD HYDRAULIC WRECKING HAMMERS FOR ARM USE Wrecking hammers developed specifically for the new generation mini excavators. Produced with a structure and a hydraulic circuit that can develop the maximum power, by safeguarding the arm of the operating machines. MD 80 SILENCED 80 kg. 700x200 mm. Ideal capacity: It/min (23). Oil pressure: 120 bar. Stroke frequency: min. Stroke energy: 17 kgm (170 J). Tool diameter: 48 mm. ROM*: from 8 to 30 q.li. SILENCED RANGE ACCESSORIES Conic bit Asphalt-cutting little spade Chisel MD 35 Super light wrecking hammer 35 kg 600x190 mm Ideal capacity: 7-15 l/min. (12) Oil pressure: min100 - max140 bar Stroke frequency: 2000 min. Stroke energy: 7 kgm (68 J) Hexagonal coupling: 25x108 ROM*: from 0,4 to1 q.li. MD kg 700x190 mm Ideal capacity: l/min. (20) Oil pressure: 120 bar Stroke frequency: min. Stroke energy: 14 kgm (140 J) Tool diameter: 40 mm MOC*: from 6 to 22 q.li. MD 120 SILENCED Heavy wrecking hammer 120 kg 830x275 mm Ideal capacity: l/min. Oil pressure: bar Stroke frequency: min. Stroke energy: 21 kgm (206 J) Tool diameter: 48 mm ROM*: from 12 to 42 q.li. MD 200 SILENCED 200 kg. 850x300 mm. Ideal capacity: It/min. Oil pressure: bar. Stroke frequency: min. Stroke energy: 50 kgm (490 J). Tool diameter: 60 mm. ROM*: from 20 to 50 q.li. Standard equipment Belts for arm fixing Bushes and pins (*) ROM = recommended operating machine 44
6 PI 350 Max. water delivery:350 lt/min. Max. head: 22 mt. Weight: 9 kg. Hose coupling: 1"1/ lt/min. Dimensions: 330x220x160 mm. PI 1200 PS 1300 Max. water delivery:1.300 lt/min. Max. head: 30 mt. Weight: 9 kg. Hose coupling: 1"1/ lt/min. Max. pressure: 120 bar. Dimensions: 200x100x400 mm. PS 1800 PI 350 PI/PS SUBMERSED HYDRAULIC PUMP PI 1200 Max. water delivery:1.200 lt/min. Max. head: 17 mt. Weight: 10 kg. Hose coupling: 2"1/ lt/min. Dimensions: 400x290x200 mm. Max. water delivery:1.800 lt/min. Max. head: 30 mt. Weight: 11 kg. Hose coupling: 1"1/ lt/min. Max. pressure: 120 bar. Dimensions: 200x150x450 mm. Standard equipment (any model) 2 50-cm long hoses with couplings Filter Model U.M. PI 350 PI 1200 PI 1300 PI 1800 PI 2300 Max. water delivery lt/min Max. head mt PS 2300 Max. water delivery:2.200 lt/min. Max. head: 30 mt. Weight: 12 kg. Hose coupling: 1"1/ lt/min. Max. pressure: 130 bar. Dimensions: 200x150x480 mm. The hydraulic drill TI 200 (for 2 operators) is suitable both for building and agricultural drilling. Max. drilling diameter: 500 mm lt/min. Max. pressure: 130 bar. Weight: 15 kg. Standard equipment 2 hoses 50 cm. of length with connections coupling Handle DRILLS AVAILABLE DRILLS Ø 100 Ø 150 Ø 200 Ø 250 Ø 300 Ø 350 Ø 400 Ø 450 Ø 500 Useful length 1 m TDRILLS FOR GEO-TECHNICAL BORING Ø 80 mm x 1 mt of depth with starting push rod Ø 80 mm x 1 mt of extension Ø 100 mm x 1 mt of depth with starting push rod Ø 100 mm x 1 mt of extension TI 200 MANUAL HYDRAULIC DRILL 45
7 TB HYDRAULIC DRILLS FOR ARM USE TB 180 Min. capacity: 30 lt/1. Max. capacity: 50 lt/1. Speed: rpm RPM: 2,4. Weight (without bit): 36 kg. ROM*: from 12 to 30 q.li. TB 280 Min. capacity: 40 lt/1. Max. capacity: 75 lt/1. Speed: rpm RPM: 1,6. Weight (without bit): 70 kg. ROM*: from 30 to 60 q.li. Standard equipment Head Double joint Hook DRILLS 2 types of drills: for soils for hard and stony soils AVAILABLE DRILL Ø 100 Ø 150 Ø 200 Ø 250 Ø 300 Ø 350 Ø 400 Ø 500 AVAILABLE EXTENSIONS Ø 100 Ø 150 Ø 200 Ø 250 Ø 300 Ø 350 Ø 400 Ø 500 Higher diameters upon request. TB 380 Min. capacity: 60 lt/1. Max. capacity: 100 lt/1. Speed: rpm RPM: 0,9. Weight (without bit): 120 kg. ROM*: from 60 to 130 q.li. TB 480 SUITABLE FOR ANY MACHINE MODEL! Head with solenoid valve For the drill rotation reversion (RH and LH). FOR HIGHER PERFORMANCE: UPON REQUEST, DRILLS FOR ARM RANGE TB 1000 The wide range of these drills is capable of solving any drilling problem in the building and agricultural sector. TB 80 Min. capacity: 80 lt/1. Max. capacity: 130 lt/1. Speed: rpm RPM: 0,9. Weight (without bit): 140 kg. ROM*: from 60 to 150 q.li. REFERENCE PERFORMANCES IN FLOODED SOILS Min. capacity: 20 lt/1. Max. capacity: 30 lt/1. Speed: rpm RPM: 4. Weight (without bit): 35 kg. ROM*: from 0 to 20 q.li. (*) ROM = recommended operating machine BIT DIAMETER TB 80 TB 280 TB 480 TB 380 TB DRILL DEPTH IN METRES 46
8 Ideal for light-medium works on every types of material, also reinforced concrete. Light, powerful and safe, this tool solves quickly all drilling requirements. IDROMANUAL MANUAL HYDRAULIC DRILLING MACHINE Delivery: lt/min. Max. pressure: 170 bar. Drilling range: mm. Connection: 1"1/4. Weight (without crown): 7,5 kg. Standard equipment Hydraulic connections Connection for water Supplementary handle Service keys The hand held drilling machine IDROMANUAL can be mounted on the COMPACT 3 and 2 columns. Gradual starting with progressive control trigger. THE MOST PROFESSIONAL Water connection for cooling. 47
Hydraulic breakers and drills. Powerful, lightweight and portable
Hydraulic breakers and drills Powerful, lightweight and portable The best power-to-weight Construction and rental companies around the world are discovering the advantages of using hydraulics. They know
More informationHydraulic cut-off saws, core drills and submersible pumps. Powerful, lightweight and portable
Hydraulic cut-off saws, core drills and submersible pumps Powerful, lightweight and portable The best power-to-weight Construction and rental companies around the world are discovering the advantages of
More informationAtlas Copco handheld hydraulic equipment Powerful, lightweight and portable
Atlas Copco handheld hydraulic equipment Powerful, lightweight and portable 2 Seeing is believing Hydraulic tools should come with a warning: once you ve tried them, you re going to want them. Why? Because
More informationHydraulic Breakers JTHB SERIES
Hydraulic Breakers JTHB SERIES WALK-AROUND Whether you re tearing out a reinforced concrete abutment, scaling a tunnel, or running a pedestal-boom at the quarry, Komatsu hydraulic breakers provide you
More informationSILENT AND VERSATILE LIKE NO OTHER. RANGE S - SX NEW RANGE GENERATING SETS
SILENT AND VERSATILE LIKE NO OTHER. RANGE S - SX 3 0 0 0 r p m EN NEW RANGE GENERATING SETS RANGE S Silenced generating set MOSA S Range generating sets are versatile with high performance built in; available
More informationG.F. Gordini srl Via E. Mattei, Bagnacavallo (RA) - Italy tel fax
ATTACHMENTS FOR OPERATING MACHINERY ATTACHMENTS FOR OPERATING MACHINERY G.F. Gordini srl Via E. Mattei, 4 48012 Bagnacavallo (RA) - Italy tel. +39 0545 62712 fax +39 0545 62140 www.gfgordini.com info@gfgordini.com
More informationbatmatic batmatic MADE IN ITALY
MADE IN ITALY www..com b MILANO BOLOGNA INDEX Forward plates pag. 4 Reversible plates pag. 10 Rammers pag. 15 Twin drum rollers pag. 16 Minidumpers pag. 18 Stonecutters pag. 24 Accessories pag. 25 Since
More informationCommitted to providing solutions for every application
Light Equipment GUIDE Committed to providing solutions for every application In 1945, Joseph Cyril Bamford launched the construction and agricultural manufacturing company that bears his initials. Over
More informationCONSTRUCTION & MINING. Version 1.00
CONSTRUCTION & MINING Version 1.00 TCA-7 Light weight and easy to handle. Automatic throttle. Few parts; easy maintenance. Forged parts: durable. TCB BREAKERS Simple structure, less maintenance, compact,
More informationEN TRA ENGINEERING AND TRADING SRL
Foundation Equipment Grabs for diaphragm wall and piling Hydraulic Casing oscillators Power Packs Casing joints Stop-end pipes Water stop elements Hydraulic extractors Piling tools and accessories MADE
More informationbatmatic batmatic MADE IN ITALY
MADE IN ITALY www..com b MILANO BOLOGNA INDEX Forward plates pag. 4 Reversible plates pag. 10 Rammers pag. 15 Twin drum rollers pag. 16 Minidumpers pag. 18 Stonecutters pag. 24 Accessories pag. 25 Since
More informationAtlas Copco Cobra petrol drill and breakers Multi-purpose tools for higher productivity
Atlas Copco Cobra petrol drill and breakers Multi-purpose tools for higher productivity Cobra a reliable team mate The Cobra machine has been building up a loyal fanclub since it was first launched in
More informationLONG-LASTING BREAKING POWER
HYDRAULIC BREAKERS LONG-LASTING BREAKING POWER XP HYDRAULIC BREAKER HEAVY RANGE MEDIUM RANGE LIGHT RANGE 4 8 10 12 SH FULLY HYDRAULIC BREAKER 17 TOOLS OPTIONS 20 21 SPECIAL APPLICATIONS CREDITS 22 26 EXTREME
More informationTampers. Concrete And Asphalt Saws TC54 TC63 TC70 CS454 M CS502 HD
1 Tampers TC54 TC63 TC70 Hand-Arm-Vibration only 6.7m/s 2 (TC63). Easy access clutch, for easy maintenance (TC63). Non-leaking fuel cap. High jump for more compaction. Fully covered engine to prevent any
More informationEXCAVATOR MOUNTED MULCHERS
Quality by Design 1 EXCAVATOR MOUNTED MULCHERS - H-SMO-B - MINI- - -L - -F - SUPER- 18-224 HP Discover the Advantages of INNOVATION > over 70 years experience, mulching equipment specialists since 1971
More informationDIAGER CONTENTS DIAGER. Masonry Drill Sets...13 Chisels...14 Chisel Selection Guide...15 Diager Technical Section
Diager products have been manufactured in France for over 55 years. Diager manufacture an extensive range of premium high end tungsten carbide, masonry cutting tools for the Construction Industry. CONTENTS
More informationExcavators. Mini/Midi
Mini/Midi Excavators Hitches 1 Buckets 2-6 Earth Drills 7 Breakers 8 Hand Held Tools 9-12 Compactors 12 Rock Wheel 13 Ripper Tooth 13 Selector Grabs 13 Mini/Midi Excavators Introduction Mini/Midi Excavators
More information- the choice of. professionals...
- the choice of professionals... ONE powersource gives multiple choice... HYDRAULIC SYSTEMS POWE RED BY HYCON HEAVY DUTY BREAKERS 2 - in high quality tools for professionals! LIGHT DUTY BREAKERS RING SAW
More informationA Product of Hard Work POWERPACKS AND BREAKERS
A Product of Hard Work POWERPACKS AND BREAKERS RELIABILITY POWERPACKS AND BREAKERS Built-in quality and reliability A growing tide of opinion says that hydraulic powerpacks make better business sense than
More informationHYDRAULIC BREAKERS HB-6000
HYDRAULIC BREAKERS HB6000 +POWER REDUCED DOWNTIME = PLUS MORE WORK, MORE PROFIT AND DEPENDABLE PERFORMANCE Features and Benefits EQUALS It s a simple equation, whether you re tearing down a bridge, scaling
More informationCat. Hammers H35E, H45E, H55E, H65E
Cat Hammers H35Es, H45Es, H55Es, H65Es H35E, H45E, H55E, H65E Features: Built for Your Convenience, Comfort Cat Hammers are designed for optimum performance and integration with your Cat compact construction
More informationHydraulic Breaker. Attachments
Hydraulic Breaker Attachments Breaking news The new HB Series Bobcat breakers are breaking news! To meet the most demanding customer requirements, we designed them completely from a blank slate. Reduced
More informationThe Right Tool for Your Tough Job
The Right Tool for Your Tough Job Applications Tool Sullair Model Class Weight cfm Horizontal and overhead applications Chipping Hammer MCH-2/3/4 15# 16-19 lbs 26-33 Industrial applications MCH-3S/4S Cutting
More informationROBBINS 34RH C. Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter.
ROBBINS 34RH C Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter. RAISING THE BAR IN VERSATILITY THE ROBBINS 34RH C IS A LOW-PROFILE, LIGHTWEIGHT RAISE DRILL RIG
More informationMini/Midi Excavator Attachments Guide ATTACHMENTS
Mini/Midi Excavator Attachments Guide ATTACHMENTS Introduction Contents Our Range JCB s range of Mini/Midi Excavator equipment is expanding and so are the attachments to complement this range. JCB attachments
More informationRobbins 34RH. Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter
Robbins 34RH Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter 1 Raising the bar in versatility The Robbins 34RH is a low profile, lightweight raise drill rig for holes of
More informationDemolition technology
Demolition technology These reasons speak for the demolition technology of. Demolition expertise to the last detail. 1. Guaranteed "breaker" expertise where quality meets variety. You will master every
More informationComplete systems for efficient diamond drilling
Complete systems for efficient diamond drilling Power and intelligence in perfect When you measure efficiency in terms of number of holes per hour or day, it s just as much about useability and ergonomics
More informationHANDHELD HYDRAULIC EQUIPMENT
HANDHELD HYDRAULIC EQUIPMENT YOUR BUSINESS IS IN GOOD HANDS Hydraulics lets you do more in less time. It allows tools to hit harder with less vibration and noise. Hydraulics is simply better. The first
More informationE08 - E10. Compact Excavators
E08 - E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition
More informationThese reasons speak for the products from Wacker Neuson.
Product Guide These reasons speak for the products from Wacker Neuson. 1. Quality from Wacker Neuson brings performance straight to the point. We know the application areas of our products precisely. That
More informationThe Right Tool for Your Tough Job
SULLAIR air tools The Right Tool for Your Tough Job Applications Tool Sullair Model Class Weight cfm Horizontal and overhead applications Chipping Hammer MCH-2/3/4 15# 16-19 lbs 26-33 Industrial applications
More informationThreaded rod cutters. Trapezoid-sheet pliers TOOLS. Field of application Very simple cutting of threaded rods on site
Threaded rod cutters Very simple cutting of threaded rods on site Cuts galvanised threaded rods in the qualities 4.6 and 5.8 No reworking of the threaded rods necessary Clean cut allows the nuts to be
More informationThere s no better choice
There s no better choice Well known as the original source of the In-Line Drive Design, Premier Auger has built the most reliable earth auger attachments for over 3 decades. With a complete and comprehensive
More informationThe Right Tool for Your Tough Job
SULLAIR air tools The Right Tool for Your Tough Job Applications Tool Sullair Model Class Weight cfm Horizontal and overhead applications Chipping Hammer MCH-2/3/4 15# 16-19 lbs 26-33 Industrial applications
More informationBreakers. Make an Impact.
Make an Impact. Breakers BREAKING TECHNOLOGY Bretec first made its mark in the hydraulic breaker OEM business back in 1994. Now after almost 20 years since Bretec s first impact, a Bretec branded breaker
More information14 Construction. Kincrome Cement Mixer. Kincrome Plate Compactors. Kincrome Level Range CONSTRUCTION
Construction 223 14 Construction A12 12 MONTH WAR RAN T A Y Kincrome Cement Mixer New to the range. This front tip mixer has 160 litre (5.65CF, 0.16m 3 ) capacity, single phase motor and 10 wheels. Stand
More informationBREAKING OF MASONRY DEMOLITION OF BUILDINGS CONCRETE CONSTRUCTIONS UNDERWATER BREAKING
Hydraulic Breakers REINFORCED CONCRETE UNDERWATER BREAKING ASPHALT AND PAVING CONCRETE CONSTRUCTIONS SECONDARY BREAKING DEMOLITION OF BUILDINGS BREAKING BUILDINGS BREAKING OF MASONRY Dehaco IBEX breakers
More informationFast Clip & Traklok Jaw Options (Quick Change Jaws)
Fast Clip & Traklok Jaw Options (Quick Change Jaws) Fastclip Clip up Jaws (standard on machine) Part No.: 1640146 28kg to 68kg/m Rail Fastclip Unclip jaw Jaws standard with Fastclip head 47-68 kg/m Rail,
More information18mm SDS Plus Rotary Hammer
18mm SDS Plus Rotary Hammer Product Objectives Designed to suit the needs of demolition crews, concreters, builders, electricians plumbers and any looking to undertake masonry drilling Develop 2 new high
More informationThese reasons speak for the products from Wacker Neuson.
Product Guide These reasons speak for the products from Wacker Neuson. 1. Quality from Wacker Neuson brings performance straight to the point. We know the application areas of our products precisely. That
More informationQuality & Reliable Products Source
Hydrualic Breaker Quality & Reliable Products Source www.all-kor.com www.all-kor.com AKB New Trend - Medium & Large The built-in valve system of AKB is applied to AKB medium and large class. The concept
More informationBRIDGE CUTTING MACHINE Model HTO- 1200
BRIDGE CUTTING MACHINE Model HTO- 1200 GENERAL DESCRIPTION The bridge cutting machine HTO -1200+ is designed to process of one or multiple superposed slabs of granite, marble, etc. It can be used in completely
More informationBeton Trowel nv INSTRUCTION MANUEL SLAB SAW BTCS500 - GEBABEBB BBRUBEBB BNP FORTIS: ING: BE BE
INSTRUCTION MANUEL SLAB SAW BTCS500 BBRUBB 1/20 Use this guide along with the parts lists attached to locate and identify components of your trowel. When ordering replacement parts, be sure to provide
More informationDemolition of refineries Cutting of Metal and steel structures Cutting steel girders/beams Cutting reinforcements
Shears ISS Series Application areas F II III Demolition & renovation Recycling Light Demolition Demolition of non-reinforced concrete structures Composite steel & concrete structure demolition Demolition
More informationAugust MEMBER. Registered ISO 9001:2008 Registered ISO 14001:2004
August. 2015 Registered ISO 9001:2008 Registered ISO 14001:2004 MEMBER Save your time with high efficiency and performance! Meet your needs from the most complete product line! Worldwide sales and after
More informationPrecision cutting performance on Concrete and Asphalt STREET PRO SAWS
Precision cutting performance on Concrete and Asphalt STREET PRO SAWS FCG1 - SLABSAVER The SLABSAVER is the ideal green concrete control joint flat saw. It is a lightweight, portable diamond saw that provides
More informationPrecision cutting performance on Concrete and Asphalt STREET PRO SAWS
Precision cutting performance on Concrete and Asphalt STREET PRO SAWS SP1G - SLABSAVER The SP1G is the ideal green concrete control joint flat saw. It is a lightweight, very compact diamond saw specifically
More informationThe CLIPPER Solutions
The CLIPPER Solutions 93 C51 6,5 Hp Ø 350mm 76kg Petrol Compact, robust and highly manoeuvrable machines designed for both wet and dry cutting of concrete and asphalt. Features Cutting depth adjustment
More informationYour Best Partner. We do our best to implement our promises, responsibilities and obligations for the satisfaction of our customers.
March. 2018 Registered ISO 9001:2008 Registered ISO 14001:2004 MEMBER Save your time with high efficiency and performance! Meet your needs from the most complete product line! Worldwide sales and after
More informationHYDRAULIC DRIVE MULCHERS
MULCHING EQUIPMENT SPECIA LISTS HYDRAULIC DRIVE MULCHERS SMWA skid steer SMO skid steer MINIFORST cl MIDIFORST dt hyd STARSOIL hyd STARFORST hyd SUPERFORST hyd HYDRAULIC DRIVE MULCHERS Mulchers are a long-term
More informationSERIES HYDRAULIC EXCAVATORS CX225SR
CX SERIES HYDRAULIC EXCAVATORS CX225SR Engine Latest generation engine meeting European standards (tier 2 regulations) low smoke emissions. CASE, since the first machines in the CX series were introduced,
More informationEXCAVATOR MOUNTED MULCHERS
Quality by Design 1 EXCAVATOR MOUNTED MULCHERS H-SML - H-SMO-B MINI - -L - -F - SUPER 18-224 HP Discover the Advantages of INNOVATION > nearly 70 years experience, over 35 in mulching > continuous research
More informationSteel Accessories for hand held demolition tools
Steel Accessories for hand held demolition tools Steel Accessories for pneumatic, hand held hydraulic, gas powered and electric demolition tools The steel accessories in this catalog are intended for use
More informationRODIA Diamond Core Drilling RODIA Diamond Drill Bits
Space Welding Cold welding process according to cutting-edge bonding technology: Due to the neutral zone the entire diamond segment is used without waste. SPACE WELDING Wet and dry drilling with new technology:
More information303.5E CR, 304E CR, 305E CR, 305.5E CR
303.5E CR, 304E CR, 305E CR, 305.5E CR Mini Hydraulic Excavators 303.5E CR 304E CR 305E CR 305.5E CR Engine Engine Model Cat C1.8 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 23.6 kw (31.6 hp) 30 kw
More informationJCB ATTACHMENTS FOR MINI AND MIDI EXCAVATORS A class-leading range of attachments suitable for mini and midi excavators.
JCB ATTACHMENTS FOR MINI AND MIDI EXCAVATORS A class-leading range of attachments suitable for mini and midi excavators. #completingthesolution www.jcb.com AREAS OF APPLICATION. QUICK HITCHES. CONTENTS
More informationCAYMAN DEMOLITION SHEAR.
DEMOLITION RECYCLING CAYMAN DEMOLITION SHEAR EN www.zatoshredder.com CAYMAN DEMOLITION SHEAR A C B TECHNICAL DATA FCE06RII FCE10RII FCE20RII FCE30RII FCE40RII FCE50RII FCE70RII FCE90RII Weight kg 650 1100
More informationDiamond Systems DIAMOND SYSTEMS
DIAMOND SYSTEMS 88 Diamond drilling tools Diamond coring tool DD 110-W Page 92 Diamond coring tool DD 150-U Page 92 Diamond coring tool DD 160 Page 93 Diamond coring tool DD 200 G02 Page 93 Diamond coring
More informationVERSAX SERIES VERSAX SELF-PRIMING 2-STAGE FIRE PUMP PORTABLE & WRAP-AROUND. Applications. Features and Benefits DATA SHEET
DATA SHEET VERSAX SERIES VERSAX PORTABLE & WRAP-AROUND SELF-PRIMING 2-STAGE FIRE PUMP The WATERAX VERSAX-6 and VERSAX-9 are versatile, rugged, and economical twin impeller self-priming pumps. These units
More informationV Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V 15 A 1 R B S - A 1 D X A 11 Customers demand Pump Series V Links Type (only V 15-18): none - Standard A - SAE A 2 bolts Ma. Displacement (cm 3 /n): 15, 18, 23, 25,
More information305C CR. Mini Hydraulic Excavator. Diesel Engine Net Power (ISO 9249) at 2400 rpm Operating Weight (without extra counterweight)
305C CR Mini Hydraulic Excavator Diesel Engine Net Power (ISO 9249) at 2400 rpm Operating Weight (without extra counterweight) With canopy With cab 35 kw/47.6 hp 5035 kg 5155 kg Caterpillar 305C CR Mini
More informationROBBINS 53RH C. Low-profile raise drill for holes ranging from 1.2 to 2.4 m (4-8 ft.) in diameter
ROBBINS 53RH C Low-profile raise drill for holes ranging from 1.2 to 2.4 m (4-8 ft.) in diameter SMART IN THE UPS AND DOWNS OF DRILLING THE ROBBINS 53RH C IS A UNIQUE MULTIPURPOSE RAISE DRILL, ABLE TO
More information301.7D CR. Mini Hydraulic Excavator
301.7D CR Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Transport Weight with Canopy 1610 kg 3,550 lb Rated Net Power @ 2,200 rpm (ISO 9249) 13.2 kw 17.7 hp Operating
More informationRobbins 91/123. Large-size raise boring machines for holes ranging from 2.4 to 6.0 m (8-20 ft.) in diameter
Robbins 91/123 Large-size raise boring machines for holes ranging from 2.4 to 6.0 m (8-20 ft.) in diameter 1 Compact and powerful The Robbins 91 and Robbins 123 rigs are powerful raise-boring rigs with
More informationwww.gtecattachments.com.au Improving productivity and profit through performance and reliability Since 2003 the team at G-TEC have been supplying high quality rock breakers and attachments of Korean manufacture
More informationProfi Silver Line Range 2005 Only direct import. Created :58 Revised :40 Page 1
Profi Silver Line Range 2005 Only direct import. Created 10.02.2005 14:58 Revised 25.05.2005 11:40 Page 1 INDEX Article Group Page Angle Grinders 3 Cordless Screwdriver 4 Laser Jig Saw 5 Laser Circular
More informationV Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V A 1 R B S - A D X A 1 Customers demand Pump Series V Links Type (only V -18): none - Standard A - SAE A bolts Ma. (cm 3 /n):, 18, 3,, 38, 4,, 7 Pump Control Type
More informationAdvanced Foundation Technology and Equipment
Advanced Foundation Technology and Equipment Tel. 0039 0421 325077-8 - Fax 0039 0421 325079 e-mail: ncb1@dacos.it URL: www.ncbinternational.net FOUNDATION EQUIPMENT Pile & Micro-Pile Hydraulic Rotary Rigs
More informationPumps. Everything flows quickly and efficiently. The pump program from Wacker Neuson.
G DI T F C S Pumps S ST S SA SC Everything flows quickly and efficiently. The pump program from Wacker Neuson. A dry jobsite is essential for a smooth work process. Everything flows. Everything is perfect.
More informationShape of Chisel Bush. WG- Round FC-1Z-2~4Z-2 WH- Hex FC-1Z-1~4Z-1. ø14 WG- ø14 WH- Shank mm WJ-8SL 200. Round FC-01SA WJB-8F 200 FC FC-01
Accessories CHISELS FOR FC-SERIES CHISELS / MODELS REFERENCE Sign Shape of Chisel Bush WJ- FC-01-4 WJB- FC-01-3 Sign Shape of Chisel Bush WG- FC-1Z-2~ WH- FC-1Z-1~ Sign P F SL Chisel End Shape Point Flat
More informationSullair Air Tools. We have the right tool for your job. Applications
Sullair Air Tools We have the right tool for your job. Applications Light chipping Overhead fine detail and restoration work Horizontal and overhead applications Industrial applications Cutting and driving
More informationSERIES HYDRAULIC EXCAVATORS CX135SR
CX SERIES HYDRAULIC EXCAVATORS CX135SR Engine A very low fuel consuming engine which conforms to European requirements for low exhaust emission Tier 2 in accordance with directive 97/68/EC. Engine rotation
More informationATTACHMENT GUIDE EUROPE.
ATTACHMENT GUIDE EUROPE www.gehl.com TABLE OF CONTENTS Index...4 articulated loader solutions on-fork handling solutions...8 Bucket range...10 CLAMP range...23 fork & grab range...24 earth drilling & digging...28
More informationBREAKERS. Make an Impact.
EN Make an Impact. BREAKERS 2 FINNISH BREAKING POWER Bretec first made its mark in the hydraulic breaker business back in 1994. All Bretec breakers come fully CE compliant, supplied by Sandvik, Lahti,
More informationAtlas Copco handheld hydraulic equipment Powerful, lightweight and portable
Atlas Copco handheld hydraulic equipment Powerful, lightweight and portable 2 Seeing is believing Hydraulic tools should come with a warning: once you ve tried them, you re going to want them. Why? Because
More informationDIAMOND HSS PRO GLASS & TILE HAMMER DRILL BITS ROTARY DRILL BITS METAL DRILL BITS WOOD DRILL BITS
110 MASONRY DRILLING A DRILL BIT FOR EVERY MATERIAL SPEEDHAMMER PLUS SPEEDHAMMER POWER SPEEDHAMMER MAX MASONRY GRANITE CORDLESS MULTI GLASS & TILE DIAMOND HSS PRO HSS COBALT HSS TIN TCT TURBOMAX STEP DRILL
More informationChicago Pneumatic Construction Tools
Chicago Pneumatic Construction Tools Chipping Hammers, Clay Diggers, Demolition Picks and Busters Built to last Hammers, Picks and Clay Diggers Key features CP 0012 handle based on the famous CP 0009 design
More informationEMS GROUP. We manufacture ESF Series Vibratory Hammers PS Series Power Packs WELCOME TO THE EMS GROUP
EMS GROUP We manufacture ESF Series Vibratory Hammers PS Series Power Packs Customer satisfaction is our main principle. Our customers will benefit from our expertise, our experience and commitment to
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 114 / 0814 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationPneumatic tools and accessories. For trades and businesses.
Competence from passion. Pneumatic tools and accessories. For trades and businesses. Pneumatic tools Lightweight, stable construction and proven durability: effective tools for maximum productivity. Impact
More informationProfessional Brochure of Machines and Diamond Tools for Construction
Professional Brochure of Machines and Diamond Tools for Construction INDEX 3 Drilling Selection chart for drilling machines P. 4 Drilling motors P. 5 / 7 Core drill stands P. 8 / 9 SDR 5 drilling stand
More informationROBBINS 73-SERIES. Mid-size raiseboring machines for holes ranging from 1.5 to 3.1 m (5-10 ft.) in diameter
ROBBINS 73-SERIES Mid-size raiseboring machines for holes ranging from 1.5 to 3.1 m (5-10 ft.) in diameter RAISEBORING SPECIALIST ROBBINS 73 RIGS ARE THE STURDIEST, MOST WIDELY SOLD RAISEBORING RIGS IN
More informationBREAKERS, TAMPERS & DRIVERS
BREAKERS, TAMPERS & DRIVERS Flush face couplers are factory installed. REL-GRD SERIES THE DOOGIE DRIVER GROUND ROD DRIVER The REL-GRD Series Ground Rod Driver from RELIABLE EQUIPMENT has been designed
More information300.9D. Mini Hydraulic Excavator
300.9D Mini Hydraulic Excavator Engine Gross Power (ISO 14396) 13.7 kw 18 hp Net Power 9.6 kw 13 hp Weight Operating weight without Safety frame 935 kg 2,061 lb Operating weight with Safety frame 985 kg
More informationConcrete Chain Saws CONCRETE CHAIN SAWS. AirFORCE F4. Cut through walls, floors and columns in a single pass. Pneumatic Hydraulic.
Concrete Chain Saws Pneumatic Hydraulic Cut through walls, floors and columns in a single pass CONCRETE CHAIN SAWS Model CS 536163-2 6.5 HP Air Motor Specifically designed for the demanding requirements
More informationAlquiler y venta de maquinaria para la construcción. products catalogue
products catalogue 1 Index 3 Air compresors and accesories Drilling equipment 11 Transport service Diverse equipment 4 5 6 Electric Hammers Lifting equipment Mixers Generators Lightning towers Water pumps
More informationOPERATING WEIGHT kg NET POWER 19 kw / 25, rpm BUCKET CAPACITY 0,045-0,105 m3 PC27MR-2 27MR-2. Mini-Excavator PC27MR-2
PC27MR-2 OPERATING WEIGHT 2.880-3.335 kg NET POWER 19 kw / 25,5 HP @ 2.600 rpm BUCKET CAPACITY 0,045-0,105 m3 PC 27MR-2 Mini-Excavator PC27MR-2 PC27MR-2 M INI-EXCAVATOR WALK-AROUND Tradition and Innovation
More informationJTHB. Series. Attachments. Hydraulic Breakers. Hydraulic breakers from 90 to kg For machine classes from 0,7 to 70 tonnes
JTHB Series Attachments Hydraulic Breakers Hydraulic breakers from 90 to 4.550 kg For machine classes from 0,7 to 70 tonnes Walk-Around Whether you re tearing out a reinforced concrete abutment, scaling
More informationSPECIAL SERIES XL E. New high-pressure water blasting units with 30 kw electric motor
SPECIAL SERIES XL E New high-pressure water blasting units with 30 kw electric motor Easy Power XL: the best answer More power for fast and effect to all your requirements ive operations POWERED BY Brand
More informationDIY (Personal Use Only)
1 DRILL ELECTRIC DRILL and IMPACT DRILL Standard Accessories KW0700026: 1pc Impact Drill 5pcs Masonry Drills 9pcs Twist Drills KW0700026 KW0701000 KW0701002 KW0701001 5pcs Grinding Stones 1pc Case KW0700026
More informationBUILT ON TRUST CASING OSCILLATOR
BUILT ON TRUST CASING OSCILLATOR BUILT ON TRUST SHAFT DRILLING FOR LARGE BORED PILING STRONG OSCILLATING TORQUE AND LIFTING FORCE BORE PILING FOR BIG STRUCTURE BUILDING 2 BUMA CE CO.,LTD. Company BUMA
More informationThe most complete line of drilling rigs...
PRODUCTS RANGE The most complete line of drilling rigs... MAIT, a world leader with more than 50 years experience in manufacturing hydraulic drilling rigs, presents its wide range of machines able to satisfy
More informationBUILT ON TRUST CASING OSCILLATOR
BUILT ON TRUST CASING OSCILLATOR BUILT ON TRUST SHAFT DRILLING FOR LARGE BORED PILING STRONG OSCILLATING TORQUE AND LIFTING FORCE BORE PILING FOR BIG STRUCTURE BUILDING 2 BUMA CE CO.,LTD. Company BUMA
More informationOPERATING WEIGHT kg NET POWER 21,7 kw / rpm BUCKET CAPACITY 0,035-0,13 m3 PC35MR-2 35MR-2. Mini-Excavator PC35MR-2
PC35MR-2 OPERATING WEIGHT 3.580-4.025 kg NET POWER 21,7 kw 29 HP @ 2.400 rpm BUCKET CAPACITY 0,035-0,13 m3 PC 35MR-2 Mini-Excavator PC35MR-2 PC35MR-2 M INI-EXCAVATOR WALK-AROUND Tradition and Innovation
More informationOPERATING WEIGHT kg NET POWER 20,6 kw / 27, rpm BUCKET CAPACITY 0,035-0,13 m3 PC30MR-2 30MR-2. Mini-Excavator PC30MR-2
PC30MR-2 OPERATING WEIGHT 2.990-3.465 kg NET POWER 20,6 kw 27,6 HP @ 2.500 rpm BUCKET CAPACITY 0,035-0,13 m3 PC 30MR-2 Mini-Excavator PC30MR-2 PC30MR-2 M INI-EXCAVATOR WALK-AROUND Tradition and Innovation
More informationSoil Stabilizing Rig
SPEC. F5-2691-E Date: May, 2000 SPECIFICATION NISSHA GEOMATE Series Soil Stabilizing Rig Model : DHJ-12 (Cement slurry + soil-in place mixing version ) Quantity: unit May, 2000 NIPPON SHARYO, LTD. Nagoya,
More informationCrusher Professional quality in technology and durability
Crusher Professional quality in technology and durability www.pthproducts.com Crushes even the hardest rocks Simple mounting principle Exceptionally sturdy design Austrian quality worldwide approved PTH
More informationCordless rotary hammer drill 18,0 V CHE 18.0-EC
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Cordless rotary hammer drill 8,0 V CHE 8.0-EC Order number 430.005 Battery voltage 8 V Battery capacity 2,5 / 5,0 Ah No load speed 0-400
More informationTPV Variable Displacement Axial Piston Pumps CONTENTS. General Information. Installation Instructions. Technical Specifications 6-7
CONTENTS General Information Installation Instructions Technical Specifications Single Pump Installation Drawing Tandem Pump Installation Drawing Mounting Flanges and Shaft Details Rear Pump Mounting Flanges
More information