PARTS MANUAL. Version BURNISHER. R.P.S. Corporation Phone: P.O. Box 241 Fax: Racine, Wisconsin 53401

Transcription

1 Version PARTS MANUAL 255 BURNISHER R.P.S. Corporation Phone: P.O. Box 241 Fax: Racine, Wisconsin 53401

2 Front Wheel Assembly...4 Wheels and Rollers...6 Rear Axle and Vac Motor...8 Rear Axle and Vac Motor...9 Burnisher Deck...10 Burnisher Actuator... Burnisher Actuator...14 Deck and Actuator Tower...16 Steering... Central Command...20 Steering Tower, Central Command, and Apron...22 Batteries, Seat, and Filter Box...24 Common wear parts...26 Suggested parts inventory... TABLE OF CONTENTS TOC

3 4 4 Front Wheel Assembly

4 Front Wheel Assembly 5 5

5 6 Wheels and Rollers

6 Wheels and Rollers 7 Item Part No. Part Description Qty ROLLER ROLLER BRACKET MAIN FRAME LOWER ROLLER BRACKET HORN A FAN GUARD VOLT COOLING FAN 1 8 H JNYL #10-32, -8 S/S 3 9 H-113 HB 5/8"- 11 X 4" 2 10 H HB 5/8"- 11 X 7" 2 11 H JNYL 5/8" H NYLOK 1/4"- 20 SS 9 13 H NYLOK 5/16" - SS 7 14 H FW 1/4 ID X 5/8 OD SS 3 15 H FW 5/16 ID X 3/4 OD SS 6 16 H LW 5/16" SS 6 17 H PPH #10-32 X 2" SS 4 H-744 CB 1/4"- 20 X.75" SS 9 H CB 5/16"- X 1" SS 9 20 H CB 5/16"- X 1-1/4" SS 1 7

7 8 Rear Axle and Vac Motor

8 Rear Axle and Vac Motor 9 Item Part No. Part Description Qty REAR AXLE VAC TO VAC BOX HOSE MAIN FRAME V VAC MOTOR, TANGENTAL W/SNORKEL REAR WHEEL (GRAY) (NO TREAD) /2-20 X 1-1/4 " U BOLT LUG NUT, 1/2" H /8" LOOP CLAMP 3 9 H-310 #10-16 X 1/2 DRILL TAP 1 10 H NYLOK 1/2" H HCS 3/8"-16 X 3/4" SS 2 H NYLOK 1/4"- 20 SS 9 13 H NYLOK 3/8"-16 SS 2 14 H KN 1/4-20 S/S 6 15 H FW 1/4 ID X 5/8 OD SS 9 16 H CB 1/4"- 20 X 2-1/4" SS 3 17 H CB 1/4"- 20 X 1.0" SS 3 H-9307K74 GROMMET, 1" ID X 1-3/4" OD BUNA-N 4 M-90130A029.25" NEOPRENE WASHER 9 20 T S " GOLD GROUDING CHAIN 1 9

9 10 Burnisher Deck 10

10 Burnisher Deck 11 11

11 Burnisher Actuator

12 Burnisher Actuator 13 Item Part No. Part Description Qty DOWN PRESSURE STICKER ACTUATOR PIVOT HANDLE ACTUATOR UPRIGHT ACTUATOR SPRING AJUSTMENT BRACKET " STROKE 36V ACTUATOR 1000 LB LOAD /8" ID, 1/2" OD, 1/4" LG BEARING 2 8 H-0 HCS 3/8"- 24 X 1 1/8" SS 1 9 H CLEVIS PIN 3/8" x 3.00" 1 10 H /8" X 3-1/2" CLEVIS PIN 2 11 H /2" X 3" CLEVIS PIN 1 H-707 HN 3/8"-16 SS 1 13 H HN 3/8"- 24 SS 1 14 H FW 3/8 ID X 7/8 OD SS 2 15 H CB 3/8"- 16 X 4.0" SS 1 16 H SPRING, 4-1/8" LG, 9/16 OD, (42E) 4 17 H-RUE14 3/8" RUE RING COTTER 3 H-RUE22 1/2" RUE RING COTTER 1 13

13 14 Burnisher Actuator

14 Burnisher Actuator 15 Item Part No. Part Description Qty ACTUATOR UPRIGHT ACTUATOR PIVOT SPRING AJUSTMENT BRACKET MOTOR MOUNT ACTUATOR ADJUSTMENT SHAFT " STROKE 36V ACTUATOR 1000 LB LOAD /8" ID, 1/2" OD, 1/4" LG BEARING LIMIT SWITCH EMF SUPP DIODE SIDE BROOM MOTOR 1 11 H-0 HCS 3/8"- 24 X 1 1/8" SS 1 H CLEVIS PIN 3/8" x 3.00" 1 13 H /8" X 3-1/2" CLEVIS PIN 1 14 H /2" X 3" CLEVIS PIN 1 15 H SETSCREW, KCP, 1/4"-20 X 1/4" 1 16 H SHAFT COLLAR, 3/8" ID 2 17 H JNYL, 1/2"-13, NTE 1 H HCS 1/4"-20 X 1/2 SS" 4 H HN 3/8"- 24 SS 1 20 H FW 1/4 ID X 5/8 OD SS 2 21 H FW 5/16 ID X 3/4 OD SS 4 22 H LW 1/4" SS 6 23 H-724 PPH #8-32 X 1" S/S 4 24 H /8" X 4" CLEVIS PIN 1 25 H SPRING, 4-1/8" LG, 9/16 OD, (42E) 4 26 H-M82550 HCS M6-1.0 X 20 SS 2 H-RUE14 3/8" RUE RING COTTER 3 28 H-RUE22 1/2" RUE RING COTTER 1 29 M-5909K31 NEEDLE ROLLER THRUST BEARING 1 30 M-5909K44 NEEDLE ROLLER THRUST BEARING WASHER 2 15

15 16 Deck and Actuator Tower

16 Deck and Actuator Tower 17 Item Part No. Part Description Qty. 1 TILT BURNISHER DECK 1 2 ACTUATOR TOWER CLEAN AIR INTAKE HOSE CLEAN AIR INTAKE HOSE MAIN FRAME /8" ID, 1/2" OD, 1/4" LG BEARING BRONZE THRUST BEARING,.50" ID X 1.0" OD X 1/16" TH 4 8 H CLAMP 2" - 3" 4 9 H-3NCNL HCN 5/16"- LG 4 10 H SHAFT COLLAR, 3/8" ID 2 11 H HCS 1/4"-20 X 5/8" SS 2 H HCS 3/8"- 16 X 1-1/2" SS 2 13 H HCS 3/8"- 16 X 1-3/4" SS 2 14 H-707 HN 3/8"-16 SS 2 15 H NYLOK 3/8"-16 SS 4 16 H FW 1/4 ID X 5/8 OD SS 2 17 H FW 5/16 ID X 3/4 OD SS 2 H FW 3/8 ID X 7/8 OD SS 6 H LW 1/4" SS 2 20 H LW 3/8" SS 2 21 H FHSCS 5/16"- X 1" SS 4 22 H FW 3/8" GRADE

17 Steering GRANITE GRANITE NOTE LED OPTION GRANITE

18 Steering Upright Item Part No. Part Description Qty BRONZE THRUST BEARING,.50" ID X 1.0" OD X 1/16" TH INDEX PLUNGER BUSHING METER STICKER PATENT PLATE BEARING A FLANGE, 1.75" ID V HEADLIGHT TOGGLE, ON-OFF SPST HOUR METER METER PLUG BACKUP ALARM B PUSH BUTTON SWITCH, SILVER 1 14 H FW 1/4" NYLON 6 15 H-000 PROTECTIVE BOOT, TOGGLE SWITCH, (BLACK) 1 16 H CB #10-32 X 5/8" SS 1 17 H /8" NYLON LOOP CLAMP 1 H-250HCN HCN 1/4"-20 H AB4-3A BLIND RIVET 4 20 H HN 5/16"- SS 4 21 H NYLOK #4-40 SS 4 22 H NYLOK #10-32 SS 3 23 H NYLOK 5/16" - SS 2 24 H FW #10 ID X 11/16 OD SS 2 25 H FW 5/16 ID X 3/4 OD SS 2 26 H LW 5/16" SS 4 H PPH #4-40 X 3/4" S/S 4 28 H PPH #10-32 X 5/8" SS 2 29 H FHP #10-32 X 3/8" SS 2 30 H BHSCS 1/4-20 X 3/4" SS 6 31 H BHSCS 5/16- X 1 6

19 20 Central Command

20 Central Command 21 Item Part No. Part Description Qty TO 100 AMP GAUGE ACCESS COVER CONTROL PANEL CONTROL PANEL TOP PLATE AMP BREAKER ACCESS COVER GASKET ONE TOUCH BUTTON BRACKET LOW SOLUTION (AMBER) COMPUTER CONTROL V LCD SCREEN FUSE, RESETTABLE, 50 AMP, 50V DC MAX V 200 AMP RELAY KEY SWITCH AMP RELAY EMERGENCY SHUT OFF EMERGENCY LEGEND PLATE TOGGLE, ON-OFF SPST PUSH BUTTON SWITCH HINGE, 6-7/8" S/S 1 21 H-016 PROTECTIVE BOOT, TOGGLE SWITCH, (RED) 1 22 H CB #10-32 X 1/2" SS 1 23 H CB #10-32 X 1" SS 2 24 H-250HCN HCN 1/4" H NYLOK 1/4"- 20 SS 5 26 H KN #10-32 SS 5 H KN 1/4-20 S/S 4 28 H FW #10 SS 5 29 H FW 1/4 ID X 5/8 OD SS 4 30 H PPH #10-32 X 1/2" S/S 1 31 H BHSCS X 1/2" SS 4 32 H BHSCS 1/4-20 X 3/4" SS 2 33 H CB 1/4"- 20 X.5" SS 2 34 H-744 CB 1/4"- 20 X 5/8" S/S 5 21

21 22 Steering Tower, Central Command, and Apron 22

22 Steering Tower, Central Command, and Apron 23 23

23 24 Batteries, Seat, and Filter Box

24 Batteries, Seat, and Filter Box 25 Item Part No. Part Description Qty MICRO SWITCH BATTERY BOX STICKER SHROUD HOSE MAIN FRAME FILTER BAG VAC BOX VAC BOX LID SUPPORT STRAP, (RH) SUPPRT STRAP (LH) BATTERY COMPARTMENT BATTERY COMPARTMENT LID CHARGER BRACKET SHROUD HOSE L 16 H BATTERY 6 VOLT 395 AH GREY CONNECTOR WITH 1/0 CONTACTS PUSH-ON RUBBER GASKET 78" LG " SS HINGE SEAT WITH ARM RESTS STROBE LIGHT 1 21 H-009 HCN 1/4"-20 LG 4 22 H-3NCNL HCN 5/16"- LG 2 23 H /4-20 LC ACORN NUT 5 24 H HCS 1/4"-20 X 3/4" SS 4 25 H NYLOK #10-32 SS 3 26 H NYLOK 1/4"- 20 SS 14 H NYLOK 5/16" - SS 8 28 H FW 1/4 ID X 5/8 OD SS H FW 5/16 ID X 3/4 OD SS 4 30 H LW 1/4" SS 9 31 H PPH #10-32 X 5/8" SS 3 32 H-744 CB 1/4"- 20 X 5/8" S/S H-744 CB 1/4"- 20 X.75" SS 8 34 H CB 5/16"- X 3/4" SS 4 35 H /8" VINYL LOOP CLAMP 1 36 M-9307K23 GROMMET, RUBBER 3/8 ID X 7/8 OD X 1/8 TH. 1 25

25 26 Common wear parts Common wear parts Pad Pad Function Results 20" Part Number " Part Number Image ultra high speed - beige Ultra high speed High speed buffing And burnishing. For high speed buffing and burnishing. For frequent burnishing on soft to medium finishes Luster lite - blue Ultra high speed buffing and burnishing. For burnishing soft floor finishes. May be used on a daily basis. Ideally suited for top dressing highly polished floors Combo ultra high speed Ultra high speed buffing and burnishing. Blended polyester and natural fibers. For frequent burnishing on medium finishes Porko ultra high speed Ultra high speed buffing and burnishing. Blended natural fiber pad. For frequent minimal burnishing on hard finishes Porko elite Ultra high speed buffing and burnishing. Blended natural fiber pad works on all UHS machines. For minimal burnishing on medium to hard finishes Porko plus Ultra high speed buffing and burnishing. High content of natural fibers. Ideal for minimal burnishing on hard finishes

26 Suggested parts inventory 255 Suggested Parts Inventory Quantity Part # Description Rear Wheel Pad Driver Belt LCD Screen One-Touch Button Push Button Switch Control Panel Top Plate Tomcat Sticker Filter Bag Stickers Foot Pedal 1 H-016 Red Boot