Versatile, intelligent and comfortable For every problem, there is a suitable Accessory

Transcription

1 Versatile, intelligent and comfortable For every problem, there is a suitable Accessory Label Cases Bolts Label cases LA-NP-... grey Label case for NP and NP-B, self-adhesive runner for insertion of labelled strips Available in 1 m, 3 m; lengths, may be shortened if required

2 Pipe racking system by G.S ACE 47 R 14 NP-... NP-B Name panels Available in 3m lengths, as well as in the lengths listed below, may be shortened if required. Length ivory grey 100 mm NP-100-i NP-100-G 150 mm NP-150-i NP-150-G 250 mm NP-250-i NP-250-G 300 mm NP-300-i NP-300-G 1000 mm NP-1000-i NP-1000-G 3000 mm NP-3000-i NP-3000-G Name panels Available in 3m lengths, as well as in the lengths listed below, may be shortened if required. Length ivory grey 100 mm NP-B-100-i NP-B-100-G 150 mm NP-B-150-i NP-B-150-G 250 mm NP-B-250-i NP-B-250-G 300 mm NP-B-300-i NP-B-300-G 1000 mm NP-B-1000-i NP-B-1000-G 3000 mm NP-B-3000-i NP-B-3000-G NP-P-1500 GAP-20 Holder for NP-B name panel weight: 6 g quantity/box: 1200 ivory grey 20 Transparent runners for the insertion of written labels. Available in 1500 mm; can be shortened if necessary. To be attached directly to the pipe with GAP-P. Insertion height: 28 mm GAP-P NP-P-1500

3 48 Pipe racking system by G.S ACE NP-C-... LA-C LA-D NP-D-... Transparent plastic pockets are attached to the pipe with holder GAP-06. NP-E-... Transparent runners for the insertion of written labels are attached directly to the pipe without holder. Available in 3m lengths, as well as in the lengths listed below, may be shortened if required. Length Height 50 mm 33 mm 23 mm 100 mm NP-C-100 NP-D-100 NP-E mm NP-C-150 NP-D-150 NP-E mm NP-C-250 NP-D-250 NP-E mm NP-C-0 NP-D-0 NP-E mm NP-C-1000 NP-D-1000 NP-E mm NP-C-3000 NP-D-3000 NP-E-3000 Format weight quantity/box LA-C 300 x 120 mm 50 g 100 LA-CA3 430 x 300 mm 170 g 200 LA-CA4 300 x 220 mm 88 g 100 LA-D 150 x 60 mm 12 g 300 conductive version LA-CA4-E 300 x 220 mm 75 g 100 LA-CA6-E 150 x 115 mm 32 g 100 Holder for LA-C... and LA-D weight: 5 g quantity/box: 2500 GAP-06 GAP-06-E conductive version BK ivory grey

4 Space for notes Pipe racking system by G.S ACE 49

5 50 Pipe racking system by G.S ACE Special parts Wrapper with 1 window, blue CV NEW L x B: 1420 x 1630 mm NEW Fleece, protective pad, self-adhesive L x B x H: 100 m/roll x 1500 mm x 0.9 mm Available as 100 m roll or lengthened. VEL-25-W Velcro strap Strap type fleece Width: 25 mm, 20 m/roll Shorter lengths available upon request. VEL-25-M Velcro strap Strap type hook Width: 25 mm, 20 m/roll Shorter lengths available upon request. Pipe wrapper, white Wall thickness Length AC-285-3m 5 mm 3000 mm NEW

6 5 Pipe racking system by G.S ACE 51 Protection Pipe wrapper of LDPE-foam, grey Wall thickness Ø internal Length PC-LDPE-5 5 mm 31 mm 1000 mm PC-LDPE-9 9 mm 29 mm PC-LDPE mm 29 mm FG-110 Pipe wrapper of cellular rubber, black Wall thickness Ø internal Length FG mm 31 mm 500 mm FG mm 31 mm 2000 mm FG-228 NEW see also: plastic profiles (page 74) Rubber belt strap FSB-GB FSB-HK FSB-OE Rubber tension strap, mm wide, sold by the metre Hook for rubber tension strap Eyelet for rubber tension strap BSB28- NEW Brush protection for your sensitive goods. Ø Length Fibre height BSB Polyamide 6 black, smooth 40 mm 5 mm BSB Polyamide 6 blue, smooth 40 mm 5 mm BSB Polyamide 6 red, smooth 40 mm 5 mm 26,7 Ø27,5 32,5

7 52 Pipe racking system by G.S ACE Various components R-A F-A HM28YA AD-SM Strap holder, round (inclusive of straps) weight: 20 g quantity/box: 400 Strap holder, flat (2 pcs.) incl. 400 mm strap weight: 20 g quantity/box: 500 Strap clip hanger weight: 49 g quantity/box: 100 floor attachment weight: 180 g quantity/box: GS-2070C End piece mount for round, slide and flat pipes HC28A E weight: 120 g quantity/box: 100 GS-2070C GS-2070C 1,0 GS-2070C 2.0 GS-2070C ES0,7 GS-2070C ES1.2 for pipes 28 x 0.7 mm for pipes 28 x 1.0 mm for pipes 28 x 2.0 mm for SUS/ECO- pipes 28 x 0.7 mm for SUS/ECO- pipes 28 x 1.2 mm Stack shoe weight: 20 g quantity/box: I.D Foot element made of aluminium casting with base panel 100 x 100 mm, hole gap 80 x 80 mm. GS-2070D End piece mount for round, slide and flat pipes HK28WA HK28WB weight: 200 g quantity/box: 90 Pipe support weight: 94 g quantity/box: 90 Pipe holder for mounting weight: 124 g quantity/box: 70 GS-2070D GS-2070D 1,0 GS-2070D ES0,7 GS-2070D ES1.2 for pipes 28 x 0.7 mm for pipes 28 x 1.0 mm for SUS/ECO- pipes 28 x 0.7 mm for SUS/ECO- pipes 28 x 1.2 mm

8 Pipe racking system by G.S ACE 53 TH40PA TH50PA TH50YA ABH-1 B B Tool holder, plastic weight: 78 g quantity/box: 50 Tool holder, plastic weight: 74 g quantity/box: 50 Tool holder, metal weight: 128 g quantity/box: Tool/drink holder for bottles, square drink containers, tools, etc. weight: 232 g quantity/box: PC-A PC-B PC-C PHR-28 pipe clamp, single fixing weight: 63 g quantity/box: 150 pipe clamp, single fixing weight: 20 g quantity/box: 300 pipe clamp, double fixing weight: 26 g quantity/box: 200 Tool trolley weight: 45 g quantity/box: BH-A BH-B PH-A PH-B Hook Hook Suspension hook Suspension hook weight: 1 g quantity/box: 200 weight: 1 g quantity/box: 500 weight: 1 g quantity/box: 500 weight: 21 g quantity/box: 500 Ø 10 Ø

9 54 Pipe racking system by G.S ACE BL28YA-U PS-A PS-B HG-D Suspension hook Swivelling cross element Swivelling cross element Metal hinge weight: 63 g quantity/box: 150 weight: 128 g quantity/box: 96 weight: 104 g quantity/box: 96 weight: 52 g quantity/box: Ø GS-1014A GS-1014B GS-1014C GS-1250A Hook Hook End piece for mounting Spring clip end piece weight: 130 g quantity/box: 70 weight: 130 g quantity/box: 70 weight: 50 g quantity/box: 200 weight: 100 g quantity/box: I.D LK28A LK28S PC-D PC-21 Joint for coated pipe weight: 46 g quantity/box: 120 Pipe joint for SUS and Eco pipe weight: 46 g quantity/box: 120 Lock (metal) weight: 157 g quantity/box: 50 Pipe hanger (for GA 21-S, page 37) weight: 57 g quantity/box: Ø Ø Note: LK28A is suitable for pipes with max. 1 mm wall thickness

10 Pipe racking system by G.S ACE 55 Bolts, nuts, washers Hexagon head screw DIN 933 SA0645 M6 x 45 Pipe on MC SA0825 M8 x 25 Castors on MC SA0830 M8 x 30 Castor mount SA08 M8 x Fastening metal SA0840 M8 x 40 wheel kit SA0850 M8 x 50 SA0865 M8 x 65 corner piece for square pipe SA1025 M10 x 25 Castors on MC SA1225 M12 x 25 Hexagon head bolt 1/2 SA /2 x 32 Socket head cap screw DIN 912 SI0612 M6 x 12 add-ons SI1030 M10 x 30 Castors on BS SI1230 M12 x 30 Castors on BS Socket head cap bolt M06 M08 M10 M12 M6 M8 M10 M12 M1-2 1/2"-12N MS05 MS06 MS08 MS10 M5 M6 M8 M10 Hexagonal nut, DIN EN Hexagonal safety lock nut, DIN 982 Nut for T-slots TN06 M6 Metal joints Spring washer BK M0610 M6 x 10 Metal joints M0625 M6 x 25 Metal joints M0630 M6 x 30 Metal joints FS08 FS10 for M8 for M10 Countersunk screw DIN 7991 Washer, DIN 125 SSI0516 M5 x 16 for 5 mm twin-wall panels SSI0520 M5 x 20 for 10 mm twin-wall panels Self-tapping drill screw, type N. SB x 16 Fastening on pipe SB x 16 Fastening on pipe US05 US06 US08 US10 US12 for M5 for M6 for M8 for M10 for M12 SGF0412 M4 x 12 Thread-rolling bolt, DIN 7500 C Countersunk screw, type 800 USG05 USG08 USG10 for M5 for M8 for M10 Cover disc, DIN 9021 SSP x 20 for GAP-23 Pan head bolt, type 801 SSPP x 20 for panels 19 mm SSPP x 25 for panels 26 mm SSPP x 20 for panels 19 mm SSPP x 60 spacer for keyboard shelf

11 56 Pipe racking system by G.S ACE Bolt with star knob HM0620 M6 black handle Fillister-head bolt DIN 7985 SLK0320 M3 x 20 for GAP-23 Nut DIN 934 M03 M3 for GAP-23 For fastening components radially and directly on pipes by means of the G.S ACE pipe racking systems. (Tool available on request.) BNM05 M5 Blind rivet nut M5 clamping range mm Hole diameter: 7.6 mm BNM06 M6 Blind rivet nut M6 clamping range mm Hole diameter: 10 mm

12 Pipe racking system by G.S ACE 57 Pull-out units Fully extendable telescopic runners With arrester to hold in closed position. Lateral mounting. Material: steel, Other designs and sizes on request. length length of fitting of extension width x height loading capacity per pair mm 308 mm kg 2x mm 7 mm x 26.3 mm mm 406 mm mm 456 mm mm 505 mm mm 554 mm mm 320 mm kg 4x mm 375 mm x 55.8 mm 96 kg mm 440 mm 97 kg mm 495 mm 110 kg mm 550 mm 119 kg mm 600 mm 118 kg mm 650 mm 123 kg mm 750 mm 129 kg bearing retainers Partly extendable telescopic runners Lateral or overlaid mounting. Material: steel, Other designs and sizes on request. length of fitting length of extension width x height loading capacity per pair bearing retainers mm 230 mm 21.5 x 45 mm 60 kg (lateral mount) 40 kg (overlaid mount) 2x Gas pressure springs Vertical installation, piston rod downwards, max. 60 inclination. Attachment with threaded rods. Guaranteed service life: 50,000 strokes provided installation instructions are complied with. Other designs and sizes on request. extension force lift end cushioning attachment thread GF M5 50 N (±20 N) 50 mm 20 mm (±10 mm) 2x M5 GF M5 100 mm GF M6 200 N (+40/ 20 N) 100 mm 20 mm (±10 mm) 2x M6 GF M6 150 mm Lug for gas pressure springs dimensions Thread Material GF x 6 x 16 mm M5 Steel,, blue chrome-plated GF x 5 x 23 mm M6 aluminium Clevis for gas pressure springs, with bolt dimensions Thread Material GF x 12 mm M6 Steel,, blue chrome-plated

13 58 Pipe racking system by G.S ACE Feet support AD30PA Small type Foot support 1/2" with PA-plastic ring, foot made of plastic (PA) and&or metal (WA-version) / ivory AD32WA weight Quantity Foot Ø L ELF AD30PA g mm 38 mm AD32WA 53 g mm 38 mm yes For drive-in bush type A (1/2" thread) AD32... AD50... Normal type Foot support 1/2" 12N Foot Ø L ELF AD32WB 32 mm 50 mm yes AD32WC 100 mm yes AD50WA 50 mm 50 mm yes AD50WB 100 mm yes AD32... AD50... Rubber type Foot support 1/2 12N, rubber insert Standard ELF version Foot Ø L AD32RA AD32RA-E 32 mm 70 mm AD32RB AD32RB-E 100 mm AD50RAN AD50RAN-E 50 mm 73 mm AD50RBN AD50RBN-E 123 mm For drive-in bush M10 AD30... AD45... Foot support Type M10 x 1.5 thread, foot painted black (PA types) Foot Ø L ELF AD30M10-30 mm mm yes AD30M mm yes AD45M10-PA 45 mm mm AD45M10-70PA 70 mm AD47... AD60... Foot support, thread M10 x 1.5 Foot Ø L ELF AD47M mm 70 mm yes AD60M mm 70 mm yes Leg Thread M12 x 1.75 Thread length: 150 mm RF-01 grey RF-01-E Rubber foot weight: g quantity/box: RF-02 Rubber foot weight: 11 g quantity/box: 450 Ø ELF black 41 black 34

14 Pipe racking system by G.S ACE 59 Accessory Steel caps for insertion in the pipe weight: 9 g quantity/box: 600 pieces for pipe type Pipe Ø Material GAS-07A D-Coat pipe 28 x 0.7 mm Steel, GAS-10A GAS-07S GAS-12S Eco pipe, SUS pipe 28 x 1.0 mm 28 x 0.7 mm Steel, 28 x 1.2 mm Ø 28 Ø Cover caps internal, made of plastic *ELF ivory grey black for pipe type Pipe Ø Material GAP-4-C-i GAP-4-C-G GAP-4-C-B * D-Coat pipe 28 mm Plastic GAP-4-S-B * Eco pipe, SUS pipe 28 mm Plastic Ø The new, universal types GAP-4-C and GAP-4-S replace all previous types Drive-in bush, metal thread inserts, fitted inside a pipe * suitable also for aluminium pipe AL 2820 Type A thread 1/2" 12N Type B thread M12 x 1.75 Type M10 thread M10 x 1.5 for pipe type Pipe Ø Ø A Material BC2807A* BC2807B* BS2807M10* D-Coat pipe 28 x 0.7 mm 24.1 mm Steel, BC2810A BC2810B BS2810M10 28 x 1.0 mm 23.5 mm Steel, AC2814B 28 x 1.4 mm 23.0 mm aluminium BC2820A BC2820B BS2820M10 28 x 2.0 mm 21.9 mm Steel, BS07A BS07B BS07SM10 Eco pipe, 28 x 0.7 mm 26.3 mm Steel, BS12A BS12B BS12SM10 SUS pipe 28 x 1.2 mm 25.3 mm Steel, Ø A Ø Metal thread attachments for mounting on pipe with thread facing floor for mounting of support feet Type A 1/2" 12N Type B thread M12 x 1.75 for pipe type Pipe Ø Ø A Material OB28A OB28B all pipes 28 mm 27.6 mm Steel, Ø A 30 M12 16 mm Thread reduction from M12 to M8 for mounting drive-in brush coated with adhesive M8 AP-50 Floor fixing plate Weight: 52 g Quantity/box: R Length Material mm Steel,

15 60 Pipe racking system by G.S ACE Space for notes