INDEX. Pumps Hand Pumps... Page 23, 24, 25. Motors Model CMM Motors...Page 26 Model CMM Motors Performance Data...Page 27

Transcription

1

2

3 INDEX Cylinders 3000 PSI Welded Cross Tube Cylinders (1.5, 2, 2 ½, 3, 3 ½, 4 )...Page 2 & PSI Welded Clevis Cylinders (1.5, 2, 2 ½, 3, 3 ½, 4 )...Page 4 & PSI Welded Clevis Log Splitter Cylinder (4 )...Page PSI Welded Swivel Ball End Cylinder (1, 1.5, 2, 2.5, 3...Page 6 & PSI Tie-rod Cylinders & Packing Kits (2, 2 ½, 3, 3 ½ & 4 )...Page 8 & 9 Valves MB Mono-Block Directional Control Valves...Page 10 MB Mono-Block Directional Control Valve Assemblies & Parts...Page 10 MB Mono-Block Directional Control Valve Specification...Page 11 MB Mono-Block Directional Control Valve Dimensional Data...Page 11 WVS Mono-Block Directional Control Valves...Page 12 WVS Mono-Block Directional Control Valve Assemblies & Parts...Page 12 WVS Mono-Block Directional Control Valve Specifications...Page 13 WVS Mono-Block Directional Control Valve Dimensional Data...Page 13 Log Splitter Valves & Cylinder...Page 14 Adjustable Flow Control Valves...Page 15 2 Spool Loader Valves... Page 16 & 17 In-Line Flow Control Valves...Page 18 In-Line Check Valves...Page 19 In-Line Needle Valves...Page 20 Ball Valves...Page 21 Pumps Hand Pumps... Page 23, 24, 25 Motors Model CMM Motors...Page 26 Model CMM Motors Performance Data...Page 27 Sales Staff... Inside Back Cover Prince Manufacturing Corporation s Wolverine Line is our new brand of quality hydraulic components. Prince understands customers want choices, so we have introduced the Wolverine Line of products to target a different segment of the market. This line takes advantage of global sourcing of complete hydraulic components, resulting in more competitively priced products. Product testing and evaluation is done at Prince s own R & D test lab before any new product is added to the Wolverine Line. This has resulted in numerous product improvements that were implemented before the products were placed on our warehouse shelves. The goal of this effort is to ensure these products meet their stated specifications and help ensure consistent quality. NOTE ALL PRICES ARE LIST CPLWI Page 1

4 C Y L I N D E R S Standard 3000 PSI Welded Cross Tube Cylinders FEATURES: 100% tested for quality assurance Hard chrome rod plating for corrosion & wear resistance Cast steel end fittings for high strength & low cost Top port design SAE O-ring ports for reliable & leak-free connection Thread-in gland design for serviceability Grease zerks included for extended pin life High luster black paint for protection from the elements Individually bagged & boxed for secure storage & transport MODEL BORE PORTS CROSS TUBE WIDTH L1-BASE END L2-ROD END B F WWXT1500-S 1.5 SAE ¾ WWXT2000-S 2.0 SAE WWXT2500-S 2.5 SAE WWXT3000-S 3.0 SAE WWXT3500-S 3.5 SAE WWXT4000-S 4.0 SAE MODEL BORE x STROKE RETRACT ROD DIA. COLUMN LOAD RATINGS WT/LBS LIST PRICE WWXT1504-S 1.5 X FULL PSI WWXT1506-S 1.5 X FULL PSI WWXT1508-S 1.5 X FULL PSI WWXT1510-S 1.5 X FULL PSI WWXT1512-S 1.5 X FULL PSI WWXT1514-S 1.5 X FULL PSI WWXT1516-S 1.5 X FULL PSI WWXT1518-S 1.5 X (270 PSI)* WWXT2004-S 2 X FULL PSI WWXT2006-S 2 X FULL PSI WWXT2008-S 2 X FULL PSI WWXT2010-S 2 X FULL PSI WWXT2012-S 2 X FULL PSI WWXT2014-S 2 X FULL PSI WWXT2016-S 2 X FULL PSI WWXT2018-S 2 X FULL PSI WWXT2020-S 2 X FULL PSI WWXT2024-S 2 X (2330 PSI)* WWXT2030-S 2 X (1560 PSI)* WWXT2032-S 2 X (1400 PSI)* WWXT2036-S 2 X (1120 PSI)* WWXT2504-S 2.5 X FULL PSI WWXT2506-S 2.5 X FULL PSI WWXT2508-S 2.5 X FULL PSI WWXT2510-S 2.5 X FULL PSI WWXT2512-S 2.5 X FULL PSI WWXT2514-S 2.5 X FULL PSI WWXT2516-S 2.5 X FULL PSI WWXT2518-S 2.5 X FULL PSI WWXT2520-S 2.5 X FULL PSI WWXT2524-S 2.5 X FULL PSI WWXT2530-S 2.5 X (2100 PSI)* WWXT2532-S 2.5 X (1880 PSI)* WWXT2536-S 2.5 X (1510 PSI)* *THESE MODELS HAVE A COLUMN LOAD RESTRICTION THAT LIMITS THE MAXIMUM PUSH LOAD THAT THE CYLINDER CAN SAFELY BE OPERATED AT. Page 2 CPLWC

5 C Y L I N D E R S Standard 3000 PSI Welded Cross Tube Cylinders MODEL BORE x STROKE RETRACT ROD DIA. COLUMN LOAD RATINGS WT/LBS LIST PRICE WWXT3004-S 3 X FULL PSI WWXT3006-S 3 X FULL PSI WWXT3008-S 3 X FULL PSI WWXT3010-S 3 X FULL PSI WWXT3012-S 3 X FULL PSI WWXT3014-S 3 X FULL PSI WWXT3016-S 3 X FULL PSI WWXT3018-S 3 X FULL PSI WWXT3020-S 3 X (2930 PSI)* WWXT3024-S 3 X (2150 PSI)* WWXT3030-S 3 X (1460 PSI)* WWXT3032-S 3 X (1300 PSI)* WWXT3036-S 3 X (1050 PSI)* WWXT3040-S 3 X (860 PSI)* WWXT3048-S 3 X (620 PSI)* WWXT3508-S 3.5 X FULL PSI WWXT3510-S 3.5 X FULL PSI WWXT3512-S 3.5 X FULL PSI WWXT3514-S 3.5 X FULL PSI WWXT3516-S 3.5 X FULL PSI WWXT3518-S 3.5 X FULL PSI WWXT3520-S 3.5 X FULL PSI WWXT3524-S 3.5 X (2730 PSI)* WWXT3530-S 3.5 X (1870 PSI)* WWXT3532-S 3.5 X (1670 PSI)* WWXT3536-S 3.5 X (1360 PSI)* WWXT3540-S 3.5 X (1130 PSI)* WWXT3548-S 3.5 X (810 PSI)* WWXT4008-S 4 X FULL PSI WWXT4010-S 4 X FULL PSI WWXT4012-S 4 X FULL PSI WWXT4014-S 4 X FULL PSI WWXT4016-S 4 X FULL PSI WWXT4018-S 4 X FULL PSI WWXT4020-S 4 X FULL PSI WWXT4024-S 4 X (2960 PSI)* WWXT4030-S 4 X (1980 PSI)* WWXT4032-S 4 X (1780 PSI)* WWXT4036-S 4 X (1440 PSI)* WWXT4040-S 4 X (1160 PSI)* WWXT4048-S 4 X (840) PSI)* PMCK-WW1500 Packing Kit PMCK-WW2000 Packing Kit PMCK-WW2500 Packing Kit PMCK-WW3000 Packing Kit PMCK-WW3500 Packing Kit PMCK-WW4000 Packing Kit *THESE MODELS HAVE A COLUMN LOAD RESTRICTION THAT LIMITS THE MAXIMUM PUSH LOAD THAT THE CYLINDER CAN SAFELY BE OPERATED AT. CPLWC Page 3

6 C Y L I N D E R S Standard 3000 PSI Welded Clevis Cylinders FEATURES: 100% tested for quality assurance Hard chrome rod plating for corrosion & wear resistance Cast steel end fittings for high strength & low cost Top port design SAE O-ring ports for reliable & leak-free connection Thread-in gland design for serviceability High luster black paint for protection from the elements Individually bagged & boxed for secure storage & transport MODEL BORE PORTS A C F G WWCL1500-S 1.5 SAE WWCL2000-S 2.0 SAE WWCL2500-S 2.5 SAE WWCL3000-S 3.0 SAE WWCL3500-S 3.5 SAE WWCL4000-S 4.0 SAE MODEL BORE x STROKE RETRACT ROD DIA. COLUMN LOAD RATINGS WT/LBS LIST PRICE WWCL1504-S 1.5 X FULL PSI WWCL1506-S 1.5 X FULL PSI WWCL1508-S 1.5 X FULL PSI WWCL1508-ASAE 1.5 X FULL PSI WWCL1510-S 1.5 X FULL PSI WWCL1512-S 1.5 X FULL PSI WWCL1514-S 1.5 X FULL PSI WWCL1516-S 1.5 X FULL PSI WWCL1518-S 1.5 X (2720 PSI)* WWCL2004-S 2 X FULL PSI WWCL2006-S 2 X FULL PSI WWCL2008-S 2 X FULL PSI WWCL2008-ASAE 2 X FULL PSI WWCL2010-S 2 X FULL PSI WWCL2012-S 2 X FULL PSI WWCL2014-S 2 X FULL PSI WWCL2016-S 2 X FULL PSI WWCL2018-S 2 X FULL PSI WWCL2020-S 2 X (2900 PSI)* WWCL2024-S 2 X (2130 PSI)* WWCL2030-S 2 X (1470 PSI)* WWCL2036-S 2 X (1080 PSI)* Page 4 CPLWC

7 C Y L I N D E R S Standard 3000 PSI Welded Clevis Cylinders MODEL BORE x STROKE RETRACT ROD DIA. COLUMN LOAD RATINGS WT/LBS LIST PRICE WWCL2504-S 2.5 X FULL PSI WWCL2506-S 2.5 X FULL PSI WWCL2508-S 2.5 X FULL PSI WWCL2508-ASAE 2.5 X FULL PSI WWCL2510-S 2.5 X FULL PSI WWCL2512-S 2.5 X FULL PSI WWCL2514-S 2.5 X FULL PSI WWCL2516-S 2.5 X FULL PSI WWCL2518-S 2.5 X FULL PSI WWCL2520-S 2.5 X FULL PSI WWCL2524-S 2.5 X (2850 PSI)* WWCL2530-S 2.5 X (1960 PSI)* WWCL2536-S 2.5 X (1430 PSI)* WWCL2548-S 2.5 X (710 PSI)* WWCL3004-S 3 X FULL PSI WWCL3006-S 3 X FULL PSI WWCL3008-S 3 X FULL PSI WWCL3008-ASAE 3 X FULL PSI WWCL3010-S 3 X FULL PSI WWCL3012-S 3 X FULL PSI WWCL3014-S 3 X FULL PSI WWCL3016-S 3 X FULL PSI WWCL3018-S 3 X FULL PSI WWCL3020-S 3 X (2660 PSI)* WWCL3024-S 3 X (1980 PSI)* WWCL3030-S 3 X (1360 PSI)* WWCL3036-S 3 X (990 PSI)* WWCL3504-S 3.5 X FULL PSI WWCL3506-S 3.5 X FULL PSI WWCL3508-S 3.5 X FULL PSI WWCL3508-ASAE 3.5 X FULL PSI WWCL3510-S 3.5 X FULL PSI WWCL3512-S 3.5 X FULL PSI WWCL3514-S 3.5 X FULL PSI WWCL3516-S 3.5 X FULL PSI WWCL3518-S 3.5 X FULL PSI WWCL3520-S 3.5 X FULL PSI WWCL3524-S 3.5 X (2700 PSI)* WWCL3530-S 3.5 X (1860 PSI)* WWCL3536-S 3.5 X (1350 PSI)* WWCL4004-S 4 X FULL PSI WWCL4006-S 4 X FULL PSI WWCL4008-S 4 X FULL PSI WWCL4008-ASAE 4 X FULL PSI WWCL4010-S 4 X FULL PSI WWCL4012-S 4 X FULL PSI WWCL4014-S 4 X FULL PSI WWCL4016-S 4 X FULL PSI WWCL4018-S 4 X FULL PSI WWCL4020-S 4 X FULL PSI WWCL4024-S 4 X FULL PSI WWLS4024-S 4 X FULL PSI WWCL4030-S 4 X (2010 PSI)* WWCL4036-S 4 X (1450 PSI)* PMCK-WW1500 Packing Kit PMCK-WW2000 Packing Kit PMCK-WW2500 Packing Kit PMCK-WW3000 Packing Kit PMCK-WW3500 Packing Kit PMCK-WW4000 Packing Kit *THESE MODELS HAVE A COLUMN LOAD RESTRICTION THAT LIMITS THE MAXIMUM PUSH LOAD THAT THE CYLINDER CAN SAFELY BE OPERATED AT. CPLWC Page 5

8 C Y L I N D E R S Standard 3000 PSI Welded Swivel Ball End Cylinders FEATURES: 100% tested for quality assurance Hard chrome rod plating for corrosion & wear resistance Cast steel end fittings for high strength & low cost Top port design SAE O-ring ports for reliable & leak-free connection Thread-in gland design for serviceability High luster black paint for protection from the elements Individually bagged & boxed for secure storage & transport Spherical End Fittings MODEL (A) SWIVEL WIDTH (B) SWIVEL DIAMETER WWSB1000-S WWSB1500-S WWSB2000-S WWSB2500-S WWSB3000-S MODEL BORE x STROKE RETRACT ROD DIA. PORTS PIN HOLE WT/LBS LIST PRICE WWSB1004-S 1 X #6 SAE $ WWSB1006-S 1 X #6 SAE $ WWSB1008-S 1 X #6 SAE $ WWSB1010-S 1 X #6 SAE $ WWSB1012-S 1 X #6 SAE $ WWSB1504-S 1.5 X #6 SAE $ WWSB1506-S 1.5 X #6 SAE $ WWSB1508-S 1.5 X #6 SAE $ WWSB1510-S 1.5 X #6 SAE $ WWSB1512-S 1.5 X #6 SAE $ WWSB1514-S 1.5 X #6 SAE $ WWSB1516-S 1.5 X #6 SAE $ WWSB2006-S 2 X #8 SAE $ WWSB2008-S 2 X #8 SAE $ WWSB2010-S 2 X #8 SAE $ WWSB2012-S 2 X #8 SAE $ WWSB2016-S 2 X #8 SAE $ WWSB2020-S 2 X #8 SAE $ WWSB2024-S 2 X #8 SAE $ WWSB2030-S 2 X #8 SAE $ Page 6 CPLWC

9 C Y L I N D E R S Standard 3000 PSI Welded Swivel Ball End Cylinders MODEL BORE x STROKE RETRACT ROD DIA. PORTS PIN HOLE WT/LBS LIST PRICE WWSB2506-S 2.5 X #8 SAE $ WWSB2508-S 2.5 X #8 SAE $ WWSB2510-S 2.5 X #8 SAE $ WWSB2512-S 2.5 X #8 SAE $ WWSB2516-S 2.5 X #8 SAE $ WWSB2520-S 2.5 X #8 SAE $ WWSB2524-S 2.5 X #8 SAE $ WWSB3006-S 3 X #8 SAE $ WWSB3008-S 3 X #8 SAE $ WWSB3010-S 3 X #8 SAE $ WWSB3012-S 3 X #8 SAE $ WWSB3016-S 3 X #8 SAE $ WWSB3020-S 3 X #8 SAE $ WWSB3024-S 3 X #8 SAE $ PMCK-WW1500 Packing Kit PMCK-WW2000 Packing Kit PMCK-WW2500 Packing Kit PMCK-WW3000 Packing Kit PMCK-WW3500 Packing Kit PMCK-WW4000 Packing Kit CPLWC Page 7

10 C Y L I N D E R S Standard 2500 PSI Tie-rod Cylinders FEATURES: Steel rod clevis & base clevis 100% tested Clevis meets ASAE specs Individually bagged & boxed Side port configuration NPT ports available, please consult your sales manager Based on your input, we are converting out Wolverine NPT ported cylinder inventory to SAE ported inventory. The new model # s are designated with an S at the end of the existing model #. Please check, we may still have some NPT ported cylinders in stock. MODEL BORE EXT PORT SAE RET PORT SAE A B C D E F G H W S 2.0 #6 # W S 2.5 #6 # W S 3.0 #8 # W S 3.5 #8 # W S 4.0 #8 # MODEL BORE x STROKE RETRACT ROD DIAMETER COLUMN LOAD (LBS)/PSI* WT LIST PRICE W S 2 X FULL PSI W S 2 X FULL PSI W S 2 X FULL PSI V S 2 X FULL PSI W S 2 X FULL PSI W S 2 X FULL PSI W S 2 X FULL PSI W S 2 X FULL PSI V S 2 X ,750 LB / 2,470 PSI* W S 2 X ,850 LB / 2,490 PSI* W S 2 X ,500 LB / 2,390 PSI* W S 2 X ,500 LB / 1,770 PSI* W S 2 X ,800 LB / 1,220 PSI* W S 2 X ,750 LB / 875 PSI* W S 2.5 X FULL PSI W S 2.5 X FULL PSI W S 2.5 X FULL PSI V S 2.5 X FULL PSI W S 2.5 X FULL PSI W S 2.5 X FULL PSI W S 2.5 X FULL PSI W S 2.5 X ,050 LB / 2,250 PSI* W S 2.5 X FULL PSI W S 2.5 X FULL PSI W S 2.5 X ,650 LB / 1,760 PSI* W S 2.5 X ,900 LB / 1,200 PSI* W S 2.5 X ,300 LB / 875 PSI* Page 8 CPLWC

11 C Y L I N D E R S Standard 2500 PSI Tie-rod Cylinders MODEL BORE x STROKE RETRACT ROD DIAMETER COLUMN LOAD (LBS)/PSI* WT LIST PRICE W S 3 X FULL PSI W S 3 X FULL PSI W S 3 X FULL PSI V S 3 X FULL PSI W S 3 X FULL PSI W S 3 X FULL PSI W S 3 X FULL PSI W S 3 X FULL PSI V S 3 X FULL PSI W S 3 X FULL PSI W S 3 X FULL PSI W S 3 X FULL PSI W S 3 X ,150 LB / 1,720 PSI* W S 3 X ,150 LB / 1,720 PSI* V S 3.5 X FULL PSI W S 3.5 X FULL PSI W S 3.5 X FULL PSI W S 3.5 X FULL PSI W S 3.5 X ,000 LB / 1,760 PSI* V S 3.5 X FULL PSI W S 3.5 X ,000 LB / 1,450 PSI* W S 3.5 X FULL PSI W S 3.5 X ,000 LB / 1,870 PSI* W S 3.5 X ,000 LB / 1,250 PSI* W S 4.0 X FULL PSI V S 4.0 X FULL PSI W S 4.0 X FULL PSI W S 4.0 X FULL PSI W S 4.0 X FULL PSI W S 4.0 X FULL PSI V S 4.0 X FULL PSI W S 4.0 X ,000 LB / 2,380 PSI* W S 4.0 X ,000 LB / 1,990 PSI* W S 4.0 X FULL PSI W S 4.0 X FULL PSI W S 4.0 X ,000 LB / 2,150 PSI* PMCK-W Packing Kit PMCK-W Packing Kit PMCK-W Packing Kit PMCK-W Packing Kit PMCK-W Packing Kit * These models have a column load restriction that limits the maximum push load that the cylinder can safely operate at. NOTE: V models are built to ASAE retract dimensions. The B dimension shown in the chart will be 2.00 inches longer for 8.0 inch stroke V models and will be 5.25 inches longer for 16.0 inch stroke V models. Also, Model V300160, V , & V will have a 1.25 pin. CPLWC Page 9

12 V A L V E S Mono-Block Directional Control Valves FEATURES: 1-6 spool mono-block 3500 PSI rating #8 SAE O-ring in/out Ports #8 SAE O-ring work ports Interchangeable motor spool Load check Parallel cylinder spools Adjustable relief Enclosed handle design Open center field convertible to power beyond & closed center included Low spool leakage ( PSI) Hardened steel spools MB Mono-Block Directional Control Valve Assemblies VALVE NO. OF WEIGHT LIST MODEL NO. SPOOLS SPOOL TYPE, ACTION (POUNDS) PRICE MB11B5C1 1 4 WAY 3 POSITION, SPRING CENTER TO NEUTRAL, ALL SPOOLS MB11C5C1 1 4 WAY 3 POSITION MOTOR, 3 POSITION DETENT, ALL SPOOLS MB11G5C1 1 4 WAY 4 POSITION FLOAT, SPRING CENTER W/FLOAT DETENT MB21BB5C1 2 4 WAY 3 POSITION, SPRING CENTER TO NEUTRAL, ALL SPOOLS MB21GB5C1 2 4 WAY 4 POSITION FLOAT, SPRING CENTER W/FLOAT DETENT, 1 ST SPOOL 4 WAY 3 POSITION, SPRING CENTER TO NEUTRAL, 2 ND SPOOL MB31BBB5C1 3 4 WAY 3 POSITION, SPRING CENTER TO NEUTRAL, ALL SPOOLS MB41BBBB5C1 4 4 WAY 3 POSITION, SPRING CENTER TO NEUTRAL, ALL SPOOLS MB51BBBBB5C1 5 4 WAY 3 POSITION, SPRING CENTER TO NEUTRAL, ALL SPOOLS MB61BBBBBB5C1 6 4 WAY 3 POSITION, SPRING CENTER TO NEUTRAL, ALL SPOOLS MB Mono-Block Directional Control Valve Parts LIST PART NO. DESCRIPTION PRICE ALUMINUM END CAP WITH SCREWS GLASS FILLED NYLON END CAP WITH SCREWS ALUMINUM ENCLOSED HANDLE HOUSING HANDLE WITH KNOB JOYSTICK KIT (field installable) MOTOR SPOOL POWER BEYOND PLUG / CLOSED CENTER PLUG SEAL KIT THREE POSITION DETENT KIT SPRING CENTER KIT RELIEF VALVE ( ) GLASS FILLED NYLON ENCLOSED HANDLE HOUSING HANDLE KNOB WAY TANDEM SPOOL (single acting) PSI RELIEF SPRINGS PSI RELIEF SPRINGS NO RELIEF PLUG Page 10 CPLWV

13 V A L V E S Model MB Specifications and Dimensional Data MAXIMUM OPERATING PRESSURE 3500 PSI STRAIGHT HANDLE LENGTH: 5.8 INCHES MAXIMUM POWER BEYOND PRESSURE 3000 PSI FILTRATION RECOMMENDATIONS: ISO / 17 / 14 MAXIMUM TANK PRESSURE 500 PSI SPOOL SEALS IN INTERNAL O-RING GROOVES NOMINAL FLOW RATING 8 GPM HIGH PRESSURE ADJUSTABLE RELIEF ADJUSTMENT RANGE MAXIMUM OPERATING TEMPERATURE 180 F PSI (PRESET TO GPM) Performance Curves CPLWV Page 11

14 V A L V E S WVS Mono-Block Directional Control Valves FEATURES: 1-6 spool mono-block 4000 PSI rating #8 SAE O-ring in/out Ports #8 SAE O-ring work ports Interchangeable motor spool Load check Parallel cylinder spools Adjustable relief Enclosed handle design Open center field convertible to power beyond & closed center not included Low spool leakage ( PSI) Nominal Flow 14 GPM WVS Mono-Block Directional Control Valve Assemblies VALVE NO. OF WEIGHT LIST MODEL NO. SPOOLS SPOOL TYPE, ACTION (POUNDS) PRICE WVS11B5C1 1 4 WAY 3 POSITION, SPRING CENTER TO NEUTRAL, ALL SPOOLS WVS11C5C1 1 4 WAY 3 POSITION MOTOR, 3 POSITION DETENT, ALL SPOOLS WVS21BB5C1 2 4 WAY 3 POSITION, SPRING CENTER TO NEUTRAL, ALL SPOOLS WVS31BBB5C1 3 4 WAY 3 POSITION, SPRING CENTER TO NEUTRAL, ALL SPOOLS WVS41BBBB5C1 4 4 WAY 3 POSITION, SPRING CENTER TO NEUTRAL, ALL SPOOLS WVS51BBBBB5C1 5 4 WAY 3 POSITION, SPRING CENTER TO NEUTRAL, ALL SPOOLS WVS61BBBBBB5C1 6 4 WAY 3 POSITION, SPRING CENTER TO NEUTRAL, ALL SPOOLS WVS Directional Control Valve Parts LIST PART NO. DESCRIPTION PRICE DOUBLE ACTING SPOOL MOTOR SPOOL FLOAT SPOOL PLUS DETENT POSITIONER (CAN BE USED ON ANY SPOOL LOCATION) POWER BEYOND PLUG / CLOSED CENTER PLUG RELIEF VALVE ( ) (51 75) RELIEF VALVE ( ) (76 150) RELIEF VALVE ( ) ( ) RELIEF VALVE ( ) ( ) HANDLE WITH KNOB HANDLE HOUSING JOYSTICK KIT (FIELD INSTALLABLE) (HANDLE INCLUDED) JOYSTICK HANDLE WITH KNOB SEAL KIT (COMPLETE FOR UP TO 6 SECTIONS INCLUDING OR SEAL FOR MAIL RELIEF VALVE) SPRING CENTER KIT POSITION DETENT KIT (DETENT IN POSITION 1, 0, AND 2) Page 12 CPLWV

15 V A L V E S Model WVS Specifications and Dimensional Data MAXIMUM OPERATING PRESSURE 4000 PSI STRAIGHT HANDLE LENGTH: 7.1 INCHES MAXIMUM TANK PRESSURE 300 PSI FILTRATION RECOMMENDATIONS: ISO / 17 / 14 NOMINAL FLOW RATING 14 GPM SPOOL SEALS IN INTERNAL O-RING GROOVES MAXIMUM OPERATING TEMPERATURE 180 F HIGH PRESSURE ADJUSTABLE RELIEF ADJUSTMENT RANGE PSI (PRESET TO 2500 PSI) Performance Curves CPLWV Page 13

16 V A L V E S Log Splitter Valves FEATURES: Pressure release detent at end of retract stroke / detent in spool in position Relief set to 2,250 PSI Max tank port pressure 500 PSI Max operating temperature 180 F Model Log Splitter Valves PORT SIZE SHIPPING LIST MODEL No. DESCRIPTION WORK / IN-OUT MAX PSI MAX FLOW WEIGHT PRICE WLS-800 Log Splitter Valve ½ NPTF / ¾ NPTF 3,265 PSI 30 GPM Detent Kit Relief Kit (in/out ports) Handle Kit Seal Kit WWLS4024-S Log Splitter Cylinder 4x24 #8 SAE 3,000 PSI 30 GPM Handle Kit Page 14 CPLWV

17 V A L V E S Adjustable Flow Control Valves The W-1900 is a pressure compensated adjustable flow control valve. By rotating the handle, the flow out the CF or controlled flow port can be varied within the range given in the chart below. Any remaining flow is bypassed to the EF or excess flow port. This flow can be used to power another circuit or can be returned to tank. Once the controlled flow is set, it will remain nearly constant with variations in pressure on either the controlled or excess flow ports. Please note, if during operation the controlled flow port is blocked, the valve will compensate in such a way as to shut off flow to the excess port. This valve can also be used as a restrictive flow control by plugging the excess flow port. The WR-1900 has a built-in adjustable pressure relief. For this model, the excess flow port must be connected to tank. It should be noted that whenever this or any valve is used to bypass or restrict flow, heat will be generated. Steps may be required to keep oil temperature from becoming too high. Model W/WR Adjustable Flow Control Valves WEIGHT LIST MODEL No. DESCRIPTION CROSS REF. (POUNDS) PRICE W ½-NPTF PORTS (0-8 GPM CF SPOOL) FC51-½ W #8 SAE/ORB PORTS (O-8 GPM CF SPOOL) FC W ½-NPTF PORTS (O-16 GPM CF SPOOL) FC51-½ W ¾-NPTF PORTS (0-30-GPM CF SPOOL) FC51-3/ W #12 SAE/ORB PORTS (O-30 GPM CF SPOOL) FC WR ½-NPTF PORTS (O-16 GPM W/RELIEF) FCR51-½ WR ¾ NPTF PORTS (0-30 GPM W/RELIEF) FCR51-¾ WR #12 SAE/ORB PORTS (0-30 GPM W/RELIEF) FCR WR ⅜-NPTF PORTS (0-8 GPM CF SPOOL) FCR51-⅜ RELIEF PRESSURE INFORMATION: Inlet relief protection available on WR models. Relief pressure preset at 1500 PSI and is adjustable from 1250 to 3000 PSI. To adjust, remove acorn nut, turn adjusting screw clockwise to increase pressure, counterclockwise to reduce pressure. Reinstall acorn nut after adjusting. Use a pressure gauge when making adjustments. VALVE SPECIFICATIONS 30 GPM max flow 3000 PSI max 180 F max temp Filtration 17/14/19 For use with mineral based hydraulic fluid Side port configuration 100% Tested External seals on rotary spool prevent contamination from locking up spool KITS PART NO. DESCRIPTION LIST HANDLE KIT RELIEF KIT SEAL KIT CPLWV Page 15

18 2 Spool Loader Valves V A L V E S FEATURES: Nominal flow 12 gallons Maximum flow 16 gallons Maximum operation pressure 5000 PSI Maximum back pressure 725 PSI Port size #8 SAE Work port #8 Not for use with closed center systems Internal leakage 3cc Paint black Load check in each spool Power beyond available Open Center Series Circuit Model 2 Spool Loader Valves PORT SIZE WEIGHT LIST MODEL No. DESCRIPTION WORK / IN-OUT MAX PSI MAX FLOW POUNDS PRICE WLV21GB5C1 2 Spool Loader Valve SAE #8 5,000 PSI 16 GPM Power Beyond Plug GPM Series Circuit Page 16 CPLWV

19 2 Spool Loader Valves V A L V E S CPLWV Page 17

20 In-Line Flow Control Valves V A L V E S FEATURES: Carbon steel body Designed to provide precision flow control & shut off in one flow direction & provide free flow in the opposite direction Color bands allow fast return to a previous setting Set screw locks valve to any setting Operating temp range -20 F through 210 F Model In-Line Flow Control Valves SHIPPING LIST MODEL No. PORT SIZE MAX PSI MAX FLOW WEIGHT PRICE WFC-400 ¼ NPTF 5,000 PSI 5 GPM WFC-600 ⅜ NPTF 5,000 PSI 8 GPM WFC-800 ½ NPTF 5,000 PSI 15 GPM WFC-1200 ¾ NPTF 3,000 PSI 25 GPM WFC NPTF 3,000 PSI 40 GPM MODEL NO. MAX FLOW A B C D E F G H WFC GPM ¼ NPTF WFC GPM ⅜ NPTF WFC GPM ½ NPTF WFC GPM ¾ NPTF WFC GPM 1 NPTF Page 18 CPLWV

21 In-Line Check Valves V A L V E S FEATURES: Carbon steel body Designed to provide flow in one direction Operating temp range -20 F through 210 F Model In-Line Check Valves SHIPPING LIST MODEL No. PORT SIZE MAX PSI MAX FLOW WEIGHT PRICE WCV-400 ¼ NPTF 5,000 PSI 5 GPM WCV-600 ⅜ NPTF 5,000 PSI 8 GPM WCV-800 ½ NPTF 5,000 PSI 15 GPM WCV-1200 ¾ NPTF 3,000 PSI 25 GPM WCV NPTF 3,000 PSI 40 GPM MODEL NO. MAX FLOW MAX PSI A B C WCV GPM 5000 ¼ NPTF WCV GPM 5000 ⅜ NPTF WCV GPM 5000 ½ NPTF WCV GPM 3000 ¾ NPTF WCV GPM NPTF CPLWV Page 19

22 In-Line Needle Valves V A L V E S FEATURES: Carbon steel body Designed to provide precision flow control Operating temp range -20 F through 210 F Model In-Line Needle Valves SHIPPING LIST MODEL No. PORT SIZE MAX PSI MAX FLOW WEIGHT PRICE WNV-400 ¼ NPTF 5,000 PSI 5 GPM WNV-600 ⅜ NPTF 5,000 PSI 8 GPM WNV-800 ½ NPTF 5,000 PSI 16 GPM WNV-1200 ¾ NPTF 3,000 PSI 25 GPM WNV NPTF 3,000 PSI 40 GPM Page 20 CPLWV

23 Ball Valves for Hydraulic Use V A L V E S FEATURES: ¼, ⅜, ½ sizes 7,250 PSI (CWP) ¾, 1 sizes 4,500 PSI (CWP) Carbon Steel Body Zinc Plated Hard Chrome Plated Steel Ball, POM Seat 3 way valves are L Type Operating Temp -20 to 175 F Not Recommended for Steam, Gas, or Water Service 2 Way High Pressure Ball Valves SHIPPING LIST MODEL No. PORT SIZE MAX PSI WEIGHT PRICE WBV2-400 ¼ NPTF 7,250 PSI WBV2-600 ⅜ NPTF 7,250 PSI WBV2-800 ½ NPTF 7,250 PSI WBV ¾ NPTF 4,500 PSI WBV NPTF 4,500 PSI WBV2-SAE4 SAE4 7,250 PSI WBV2-SAE6 SAE6 7,250 PSI WBV2-SAE8 SAE8 7,250 PSI WBV2-SAE12 SAE12 4,500 PSI WBV2-SAE16 SAE16 4,500 PSI Way High Pressure Ball Valves (L-Bore) WBV3L-400 ¼ NPTF 7,250 PSI WBV3L-600 ⅜ NPTF 7,250 PSI WBV3L-800 ½ NPTF 7,250 PSI WBV3L-1200 ¾ NPTF 4,500 PSI WBV3L NPTF 4,500 PSI PH: URL: CPLWV Page 21

24 THIS PAGE INTENTIONALLY LEFT BLANK. Page 22 CPLW

25 PUMPS HAND PUMPS FEATURES: Up to 3500 PSI Working Pressure SA Series is Single Acting DA Series have a built in Directional Control Valve 1.5 and 2.1 Cubic Inch Per Cycle (one up and one down) Model Hand Pumps Double Acting Heads SHIPPING WEIGHT LIST MODEL No. DESCRIPTION (pounds) PRICE WHP-15-DA 1.5 CUBIC INCH DOUBLE ACTING HEAD WHP-21-DA 2.1 CUBIC INCH DOUBLE ACTING HEAD HEAD / TANK SEAL KIT ¼ DIA STEEL BALL VALVE SEAT WHP-21-DA WHP-15-DA CPLWHP Page 23

26 PUMPS HAND PUMPS FEATURES: Up to 3500 PSI Working Pressure SA Series is Single Acting DA Series have a built in Directional Control Valve 1.5 and 2.1 Cubic Inch Per Cycle (one up and one down) Model Hand Pumps Single Acting Heads SHIPPING WEIGHT LIST MODEL No. DESCRIPTION (pounds) PRICE WHP-12-SA 1.2 CUBIC INCH SINGLE ACTING HEAD - NO TANK REQUIRED WHP-15-SA 1.5 CUBIC INCH SINGLE ACTING HEAD WHP-21-SA 2.1 CUBIC INCH SINGLE ACTING HEAD ¼ DIA STEEL BALL VALVE SEAT WHP-15-SA WHP-12-SA WHP-21-SA Page 24 CPLWHP

27 PUMPS HAND PUMPS FEATURES: Steel tanks available in 0.8 and 1.3 gallon Aluminum tank available in 0.25 gallon Mounting brackets standard feature Steel tanks painted black Fill port ¼ BSPP Drain port ⅜ BSPP Model Hand Pump Tanks SHIPPING WEIGHT LIST MODEL No. DESCRIPTION (pounds) PRICE WHP-T-300 STEEL TANK, 300 CU IN. 1.3 GAL WHP-T-180 STEEL TANK, 180 CU IN. 0.8 GAL WHP-T-60 ALUMINUM TANK, 60 CU IN GAL CPLWHP Page 25

28 M O T O R S Standard Gerotor Motors Low Speed High Torque MODEL CMM MOTORS FEATURES: High-torque, low speed with gerotor Instantly reversible by reversing the flow Cross-over for many popular models in the market 2 Bolt Flange 1.0 keyed shaft 4 Bolt flange ½ NPTF ports APPLICATIONS: Use the CMM Series for light to medium duty applications such as grain augers and elevators, salt and sand spreaders, car wash and sweeper brushes, conveyors, winches, scissor lifts, and many others. To assure optimum motor life, run motor for approximately one hour at 30% of rated pressure before application of full load. MODEL DISPLACEMENT MAXIMUM MAXIMUM PRESSURE PSI SPEED RPM WT LIST NUMBER IN 3 /REV CONTINUOUS INTERMITANT CONTINUOUS INTERMITENT LBS. PRICE CMM50-2RP CMM100-2RP CMM200-2RP CMM300-2RP CMM400-2RP CMM50-4RP CMM100-4RP CMM150-4RP CMM200-4RP CMM300-4RP CMM400-4RP It is not recommended to operate at a condition requiring both maximum torque and speed. Intermittent operation is 10% of any minute. Normal operating temperature 80 F to 140 F, max temperature 185 F. Max inlet pressure 2500 psi for motors in series. Max back pressure 1000 psi. For use with mineral based hydraulic fluid operating PSI. Maximum axial thrust load on shaft 1000 lbs. Oil filtration 10 micron on fine, oil cleanliness per ISO code level 17/14. CMM L L Page 26 CPLWM

29 M O T O R S Standard Gerotor Motor Low Speed High Torque Performance Data 346 Bold number on top = TORQUE (in lbs.) GREATEST EFFICIENCY 280 Number on bottom SPEED (RPM) HIGH EFFICIENCY CMM Cu. In. REV PSI Peak CMM Cu. In. REV PSI Peak G G P P M M CMM Cu. In. REV PSI Peak CMM Cu. In. REV PSI Peak G G P P M M CMM Cu. In. REV PSI Peak CMM Cu. In. REV PSI Peak G G P P M M PSI is the actual pressure difference between the inlet and outlet ports. To calculate horsepower from chart data use formula: A SITUATION OF SIMULTANEOUS PEAK TORQUE AND MAXIMUM RPM SHOULD NOT BE ALLOWED TO OCCUR. HP (out) = RPM x TORQUE (in-lbs). Operating motors at both low RPM (10-20 depending on disp.) and low torque may result in RPM fluctuations during operation MOTOR CROSS REFERENCE 2 Bolt Flange Mounting 4 Bolt Flange Mounting SHAFT Woodruff Keyed Woodruff Keyed PORTS ½ NPT ½ NPT MOTOR BRAND Prince Charlyn H Danfoss DH Prince Charlyn H Danfoss DH DISPLACEMENT CU. IN./REV CMM100-2RP CMM200-2RP CMM300-2RP CMM400-2RP CMM50-2RP CMM50-4RP CMM100-4RP CMM200-4RP CMM300-4RP CMM400-4RP NOTE: THE CROSS REFERENCE INFORMATION IN THIS CHART IS TO BE USED ONLY AS A REFERENCE FOR GUIDLINE PURPOSES ONLY. AFTER SELECTING A MODEL FROM ABOVE, REVIEW THE MOTOR SPECIFICATIONS TO DETERMINE COMPATIBILITY WITH SPECIFIC APPLICATION. CPLWM Page 27

30 Prince Manufacturing Corporation Wolverine Warranty Prince warrants only standard and custom products of its manufacture to be free from defects in materials or workmanship under normal use for the time periods set forth below. Wolverine standard products are warranted for 15 months from the date of purchase by Prince s customer or 12 months from the date the product is first put into service, whichever is earlier. Prince s obligation is to repair or replace free of charge or give credit for any part of its product that its inspection shows to be defective, including the lowest roundtrip transportation charges from Prince s customer to Sioux City, Iowa, and return, but excluding all transportation costs from Prince s customer to its customer and all other costs such as removal and installation expenses. Prince shall not be liable for loss of time, manufacturing costs, labor, material, loss of profits, or any other consequential damages caused directly or indirectly by defective products, whether or not such claim is based on contract, tort, warranty, or other legal basis. Written permission for any warranty claim return must first be obtained from authorized Prince personnel. All returns must be accompanied with a complete written explanation of claimed defects and the circumstances of failure. PRODUCTS MANUFACTURED OR SOLD BY PRINCE ARE NOT WARRANTED EXPRESSLY OR BY IMPLICATION FOR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, NOTWITHSTANDING ANY DISCLOSURE TO PRINCE OF THE USE TO WHICH THE PRODUCT IS TO BE PUT. THIS EXPRESS WARRANTY IS THE SOLE WARRANTY OF PRINCE. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE WARRANTY EXPRESSLY SET FORTH IN THIS DOCUMENT. THE SALE OF PRODUCTS OF PRINCE UNDER ANY OTHER WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, IS NOT AUTHORIZED. (This warranty voids all previous issues.) (Effective Date: November 1, 2015)

31 SALES STAFF Sr. VP Sales & Marketing Scott Knaack (direct) Reg ional Sales Manag ers OEM Andy Hatler Tim Prince (direct) (direct) Eric Eickhoff Wes Michaelson (direct) (direct) Jim Brinkerhoff (cell) Distributor Gary Flammang (direct) Customer Service Mike Bocian, Manager (direct) Brianna Hattig Rhonda Hattig (direct) (direct) Patricia Pulford Shelly Henderson (direct) (direct) CPLWBC

32