Polycarbonate Watertight 03 Product Drawings Last Updated 6/18/2008
|
|
- Terence O’Connor’
- 5 years ago
- Views:
Transcription
1 ROSE+BOPL PHOENIX MECNO COMPNY Polycarbonate Watertight 03 Product Drawings Last Updated 6/18/2008 Rose+Bopla Enclosures 7330 Executive Way Frederick, MD For Secondary Services, Product Support, or To Order, Call
2 Rose+Bopla s Polycarbonate Watertight 03 enclosure offers exceptional design possibilities in high quality plastic at low prices. broad range of sizes covers a wide array of widths and depths. Polycarbonate Watertight 03 Ideal where high impact resistance or chemical corrosion must be addressed at a reasonable cost. Wall mounting holes are molded into each corner. These holes are outside the internal chamber to maintain the enclosures watertight integrity. The lid must be removed to utilize the wall mounting feature. This is a basic shoe box design made of injection-molded polycarbonate. Rose+Bopla s Polycarbonate Watertight 03 enclosures are designed for use in the electro-mechanical and the electronics industry. They are good for small instruments and junction boxes. Typical applications are relay module enclosures, geophysical sensoring equipment and temperature control monitors. The Polycarbonate 03 box comes with a solid color lid and base, captive stainless steel lid screws, molded-in lid screw inserts in the base and a neoprene gasket. Metric press-in brass inserts for internal mounting bosses are also available. Polycarbonate Watertight 03 Enclosures Part Number * * * * * * * * * * Length (Inches/mm) 2.05 / / / / / / / / / / / / / / / / / / / / / / 300 Width (Inches/mm) 1.97 / / / / / / / / / / / / / / / / 230 Height (Inches/mm) 1.38 / / / / / / / / / / / / / / / / / / / / / / / 110 Weight.08 lbs.11 lbs.30 lbs.38 lbs.48 lbs.49 lbs.51 lbs.61 lbs.74 lbs..52 lbs.65 lbs.77 lbs.87 lbs 1.32 lbs.87 lbs 1.03 lbs 1.04 lbs 1.15 lbs 1.43 lbs 1.75 lbs 2.17 lbs 3.41 lbs 2.01 lbs 2.54 lbs Drawing Page # Note: Dimensions are external. Metric is the primary dimension. Inch conversions and weights are for the user s convenience and are for reference only. * 30 suffix indicates US made. shown on drawing page. TECHNICL DT: Color: Light Gray similar to RL 7035, with a high-gloss finish. Material: Injection-molded Polycarbonate. See polycarbonate specification sheets in Technical Information Chapter. Protection Classifications: Nema 4X, IP66, EN60529 Gasket Temperature Range: Neoprene Gasket 40 F to +212 F Silicone Gasket 76 F to +266 F RFI Gasket 40 F to +392 F Surface Resistance: >10 15 Ohm / VDE Disruptive Strength: >30 KV / mm / VDE Toxicity: Halogen Free. pprovals: UL Listed File #E206630, UL 50, UL 508 CS pproved Flammability: UL 94 V2 Special Material: UL Listed File #E206630, UL 50, UL 508 CS pproved Flammability: UL 94 V5 Options: (Minimum order may apply) Special Colors RFI Protection Special Material: Special order. See above for approvals The ll-round Solution
3 Polycarbonate/BS Watertight ROSE+BOPL PHOENIX MECNO COMPNY / / External Dimensions: L 52 x W 50 x H 35 mm Page 1-15, 16, M4x20 Stainless steel captive combo mm Neoprene Gasket (6.69 length) Safety Lid screws llen Thumb screws Mounting Plate mm Silicone gasket mm RFI Gasket (6.69 length) / / External Dimensions: L 65 x W 50 x H 35 mm Page 1-15, 16, M4x20 Stainless steel captive combo mm Neoprene Gasket (7.48 length) Safety Lid screws llen Thumb screws Mounting Plate mm Silicone gasket mm RFI Gasket (7.48 length). For Secondary Services, Product Support, or To Order, Call
4 Polycarbonate/BS Watertight / / External Dimensions: L 82 x W 80 x H 55 mm Page 1-16, 16, mm Neoprene Gasket (11.02 length) llen Terminal rails (TS 15) Mounting Plate mm RFI Gasket (11.02 length) / / External Dimensions: L82 x W80 x H85 mm Page 1-15, 16, mm Neoprene Gasket (11.02 length) llen Terminal rails (TS 15) Mounting Plate mm RFI Gasket (11.02 length) M4.7x7.8mm Self tapping screw for The ll-round Solution
5 ROSE+BOPL PHOENIX MECNO COMPNY / / External Dimensions: L 120 x W 80 x H 55 mm Page 1-15, 16, mm Neoprene Gasket (14.56 length) llen Terminal rails (TS 15) External Hinge Mounting Plate mm RFI Gasket (14.56 length) / / External Dimensions: L 120 x W 80 x H 85 mm Page 1-15, 16, mm Neoprene Gasket (14.56 length) llen Terminal rails (TS 15) External Hinge Mounting Plate mm RFI Gasket (14.56 length). For Secondary Services, Product Support, or To Order, Call
6 Polycarbonate/BS Watertight / / External Dimensions: L160 x W80 x H55 mm Page 1-15, 16, mm Neoprene Gasket (17.71 length) llen Terminal rails (TS 15) External Hinges Mounting Plate mm RFI Gasket (17.71 length) / / External Dimensions: L160 x W80 x H85 mm Page 1-15, 16, mm Neoprene Gasket (17.72 length) llen Terminal rails (TS 15) Mounting Plate mm RFI Gasket (17.72 length) The ll-round Solution
7 ROSE+BOPL PHOENIX MECNO COMPNY / / External Dimensions: L 122 x W 120 x H 55 mm Page 1-15, 16, mm Neoprene Gasket (17.72 length) llen Terminal rails (TS 15) Mounting Plate mm RFI Gasket (17.72 length) M4.77.8mm Self tapping screw for / / External Dimensions: L 122 x W 120 x H 85 mm Page 1-15, 16, mm Neoprene Gasket (17.72 length) llen Terminal rails (TS 32) Terminal rails (TS 35) Mounting Plate mm RFI Gasket (17.72 length) M4.77.8mm Self tapping screw for For Secondary Services, Product Support, or To Order, Call
8 Polycarbonate/BS Watertight / / External Dimensions: L 122 x W 120 x H 105 mm Page 1-15, 16, M4x45 Stainless steel captive combo mm Neoprene Gasket (17.72 length) Terminal rails (TS 32) Terminal rails (TS 35) Mounting Plate mm RFI Gasket (17.72 length) / / External Dimensions: L160 x W120 x H90 mm Page 1-15, 16, M4x37 Stainless steel captive combo mm Neoprene Gasket (19.69 length) Terminal rails (TS 32) Terminal rails (TS 35) Mounting Plate mm RFI Gasket (19.69 length) The ll-round Solution
9 ROSE+BOPL PHOENIX MECNO COMPNY / / External Dimensions: L 160 x W 120 x H 140 mm Page 1-15, 16, M4x90 Stainless steel captive combo mm Neoprene Gasket (19.69 length) Terminal rails (TS 32) Terminal rails (TS 35) Mounting Plate mm RFI Gasket (19.69 length) M4.77.8mm Self tapping screw for / / External Dimensions: L 200 x W 120 x H 75 mm Page 1-15, 16, mm Neoprene Gasket (23.23 length) llen Head Lid screws Terminal rails (TS 32) Terminal rails (TS 35) Mounting Plate mm RFI Gasket (23.23 length) M4.77.8mm Self tapping screw for For Secondary Services, Product Support, or To Order, Call
10 Polycarbonate/BS Watertight / / External Dimensions: L200 x W120 x H90 mm Page 1-15, 16, M4x37 Stainless steel captive combo mm Neoprene Gasket (23.23 length) Terminal rails (TS 32) Terminal rails (TS 35) Mounting Plate mm RFI Gasket (23.23 length) / / External Dimensions: L 240 x W 120 x H 100 mm Page 1-15, 16, M4x34 Stainless steel captive combo mm Neoprene Gasket (26.77 length) Terminal rails (TS 32) Terminal rails (TS 35) Mounting Plate mm RFI Gasket (26.77 length) The ll-round Solution
11 ROSE+BOPL PHOENIX MECNO COMPNY / / External Dimensions: L200 x W150 x H75 mm Page 1-15, 16, M4x24 Stainless steel captive combo mm Neoprene Gasket (25.98 length) llen Head Lid screws Terminal rails (TS 32) Terminal rails (TS 35) Thumb screws Mounting Plate mm RFI Gasket (25.98 length) / / External Dimensions: L240 x W160 x H90 mm Page 1-15, 16, mm Neoprene Gasket (30.71 length) llen Head Lid screws Rubber Table feet Terminal rails (TS 32) Terminal rails (TS 35) Mounting Plate mm Silicone gasket mm RFI Gasket (30.71 length). For Secondary Services, Product Support, or To Order, Call
12 Polycarbonate/BS Watertight / / External Dimensions: L 240 x W 160 x H 120 mm Page 1-15, 16, M4x55 Stainless steel captive combo mm Neoprene Gasket (30.71 length) Terminal rails (TS 32) Terminal rails (TS 35) Mounting Plate mm RFI Gasket (30.71 length) M4.77.8mm Self tapping screw for / External Dimensions: L 360 x W 160 x H 100 mm Page 1-15, M4x34 Stainless steel captive combo mm Neoprene Gasket (40.94 length) Brass Mounting Inserts Terminal rails (TS 32) Terminal rails (TS 35) Mounting Plate mm RFI Gasket (40.94 length) M6.3x9.5mm Self tapping screw for The ll-round Solution
13 ROSE+BOPL PHOENIX MECNO COMPNY / / External Dimensions: L 230 x W 80 x H 85 mm Page 1-15, 16, mm Neoprene gasket (23.2" length) Brass mounting Inserts Safety lid screws llen Rubber table feet External mounting brackets External hinges mm silicone gasket mm RFI gasket (23.2" Length) External Dimensions: L 400 x W 360 x H 150 mm Page M6x45 Stainless steel captive combo mm Neoprene gasket (59.84" length) Brass mounting inserts Rubber table feet Terminal rail (TS 32) Terminal rail (TS 35) External hinges Mounting plate mm silicone gasket mm RFI gasket (59.84" Length) M6.3x9.5 Self tapping screw for For Secondary Services, Product Support, or To Order, Call
14 Polycarbonate/BS Watertight / / External Dimensions: L 360 x W 200 x H 150 mm Page 1-15, 16, M6x45 Stainless steel captive combo mm Neoprene Gasket (42.52 length) Brass Mounting Inserts Terminal rails (TS 32) Terminal rails (TS 35) Mounting Plate mm RFI Gasket (42.52 length) M6.3x9.5 Self tapping screw for / / External Dimensions: L 300 x W 230 x H 85 mm Page 1-15, 16, M4x37 Stainless steel captive combo mm Neoprene Gasket (41.73 length) Terminal rails (TS 32) Terminal rails (TS 35) Mounting Plate mm RFI Gasket (41.73 length) The ll-round Solution
15 ROSE+BOPL PHOENIX MECNO COMPNY / / External Dimensions: L 300 x W 230 x H 110 mm Page 1-15, 16, M4x62 Stainless steel captive combo mm Neoprene Gasket (41.73 length) Terminal rails (TS 32) Terminal rails (TS 35) Mounting Plate mm RFI Gasket (41.73 length). For Secondary Services, Product Support, or To Order, Call
Polymas Watertight PK Enclosures Product Drawings Last Updated 1/6/2006
PHOENIX MECNO COMPNY PK Enclosures Product Drawings Last Updated 1/6/2006 Rose+Bopla Enclosures 7330 Executive Way Frederick, MD 21704 301-696-9800 www.rose-bopla.com customerservice@rose-bopla.com For
More informationPolymas Watertight PK Enclosures Product Drawings Last Updated 6/18/2008
A PHOENIX MECANO COMPANY PK Enclosures Product Drawings Last Updated 6/18/2008 Rose+Bopla Enclosures 7330 Executive Way Frederick, MD 21704 www.rose-bopla.com rbinfo@pm-usa.com Dimensional Drawings For
More informationECO/PCI Compact Enclosures Product Drawings Last Updated 6/19/2008
ROSE+BOPLA ENCLOSURES A PHOENIX MECANO COMPANY ECO/PCI Compact Enclosures Product Drawings Last Updated 6/19/2008 Rose+Bopla Enclosures 7330 Executive Way Frederick, MD 21704 www.rose-bopla.com rbinfo@pm-usa.com
More informationMobile Control Units 2930, 2940, 2950 Handheld Enclosures Product Drawings Last Updated 6/20/2008
Mobile Control Units 2930, 2940, 2950 Handheld Enclosures Product Drawings Last Updated 6/20/2008 Rose+Bopla Enclosures 7330 Executive Way Frederick, MD 21704 301-696-9800 www.rose-bopla.com rbinfo@pm-usa.com
More informationFiberglass Watertight Modular Flange Product Drawings Last Updated 1/6/2006
ROSE+BOPLA ENCLOSURES A PHOENIX MECANO COMPANY Fiberglass Watertight Modular Flange Product Drawings Last Updated 1/6/2006 Dimensional Drawings All sizes are available with an optional clear viewing lid.
More informationPolycarbonate and ABS enclosures with quick release lid screws CT series
Polycarbonate and s with quick release lid screws CT series The CT series of BERNSTEIN plastic enclosures are made from high-quality Polycarbonate or ABS. They are especially suitable for encapsulating
More informationAluform. Standard Industrial Enclosure. For Finishing Services, Product Support, or to Order. Call
luform Standard Industrial Enclosure For Finishing Services, Product Support, or to Order all 1-301-696-9800 Rose Enclosures 7330 Executive Way Frederick, 1704 301-696-9800 www.rose-opla.com E-mail: Rinfo@pm-usa.com
More informationEuromas ABS / PC. Colour: Light grey, similar to RAL 7035; special colours on request
Euromas ABS / PC Detailed product information can be found on www.bopla.de - 36 sizes - 19 different M...V0 versions corresponding to UL 94 V0 - All M versions are listed under UL file no. 196 706 - Terminals
More informationThe TeleControl Series Technical Drawings
The TeleControl Series Technical Drawings TeleControl TeleControl Enclosures Dimensions SIZE ID NUMBER OVERALL H X W X D INSIDE A X B X C E X F J K L M N HOLE DIA. SHIPPING WEIGHT PANEL NUMBER J1407TC
More informationPolyester enclosures CP series
Polyester enclosures CP series BERNSTEIN polyester enclosures from the CP and CPS series are made of high-quality glass-fibre reinforced polyester. The reduced surface resistance (RO
More informationWelcome to BOPLA City! ENCLOSURE SERIES
Welcome to BOPLA City! ENCLOSURE SERIES Welcome to BOPLA City! By introducing INTERTEGO, Bopla is adding a medium-sized series to its range of desktop enclosures. Two of INTERTEGO s main features are its
More informationThe DiamondShield Series DS
The DS The was developed for design flexibility and pleasing aesthetics. Applications include high-end electronics, harsh corrosive environments, and industrial applications both indoors and out. Unique
More information1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
EJB Junction Boxes Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4X*,, Ex d IIB + H2 T6, IP66 Explosionproof Dust-Ignitionproof Raintight
More informationNexT Range Large sheet steel enclosures
Large sheet steel enclosures 8 Large sheet steel enclosures The NexT Range is the optimum choice for particularly harsh environments. The stainless steel design of the NexT Range can face up to the toughest
More informationIP65/IP66 ABS/Polycarbonate Screw Lid Boxes
IP65/IP66 ABS/Polycarbonate Screw Lid Boxes p Versatile, lightweight & durable p Choice of materials: polycarbonate for rugged applications or ABS as an economic alternative p IP protection for outdoor
More informationStandard Product. Wall-Mount Cabinets ULTRX Fiberglass Type 4X WiFi Cabinet and Accessories
Spec-00144 Wall-Mount Cabinets ULTRX Fiberglass Type 4X WiFi Cabinet and Accessories ULTRX WiFi, Type 4X INDUSTRY STANDARDS UL 508A Listed; Type 4, 4X, 12, 13; File No. E61997 cul Listed per CSA C22.2
More information1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4*,, Ex d IIB + H2 T, IP Explosionproof Dust-Ignitionproof Raintight Wet Locations Applications:
More informationROSE Systemtechnik GmbH
PRODUCT OVERVIEW 1 ROSE Systemtechnik GmbH The company was founded in 1969 and specializes in the development and production of high quality industrial enclosures, which are used in a variety of environmental
More informationWall-Mount Enclosures CONCEPT Wall-Mount Enclosures
Spec-00286 H763.422.2211 763.422.2600 Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures, Type 4 and 12 INDUSTRY STANDARDS Wall-mounting brackets required to maintain
More informationStandards IEC IEC 529 Rated IP66-9 EN EN Mounting frame: removable predrilled reinforced DIN-rails
Features - The range is available in seven sizes, ranging from 12" x 8" to 40" x 32". - The cabinets are made of beige (RL 7032) hot molded fiberglass reinforced polyester, dyed in mass. The enclosure
More informationpharmaceutical petrochemical industries The new Hygienic range Clean design, easy to clean
7 The new Hygienic range Clean design, easy to clean The Hygienic line is born to help prevent bacterical contamination of products being processed in the production lines where IRINOX enclosures are used,
More informationPanel Size. Conductive
Spec-00402 ULTRX, Type 4X INDUSTRY STANDARDS Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File No. E697 cul Listed per CSA C22.2
More informationNew products Ex Equipment 2015
New products Ex Equipment 2015 ROSE Systemtechnik GmbH ROSE Systemtechnik GmbH was founded in Porta Westfalica, Germany, in 199 and is today one of the world s leading and innovative providers of industrial
More informationGlass Reinforced Polyester Enclosures
42 The GRP range comprises 16 sizes of enclosure manufactured in glass reinforced polyester (GRP). This material is highly resistant to contamination from oils, fats, aliphatic and aromatic carbohydrates,
More informationEB SERIES INSTRUMENT ENCLOSURES
EB SERIES INSTRUMENT ENCLOSURES EB Series Instrument Enclosures 1 5 2 7 4 6 Multiple-fold 1 gutter type edge provides extra stability and protects against dirt and water when enclosure is opened. Grounding
More informationEuromas-Polyester, an enclosure available
Euromas-Polyester 8 Euromas-Polyester, an enclosure available in sizes made of 0% glassbead-reinforced polyester, has been designed to satisfy the highest standards. It makes it possible for the user to
More informationPolyline Polycarbonate Enclosures
TM Polyline Polycarbonate Enclosures Authorized Distributor: From Allied Moulded Products, Inc. Experts in manufacturing nonmetallic enclosures for industrial applications WESCHLER INSTRUMENTS 800-903-9870
More informationFeatures and Benefits
8X6X4 premium line ECO FRIENDLY MADE IN THE USA Premium Polycarbonate Enclosure Features and Benefits 16 Standard configurations including hinged or non-hinged lids in 2-screw, 4-screw, or stainless steel
More informationFeatures and Benefits
10x8x6 premium line ECO FRIENDLY MDE IN THE US Premium Polycarbonate Enclosure Features and enefits 16 Standard configurations including hinged or non-hinged lids in 2-screw, 4-screw, or stainless steel
More informationHP Series. Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)
Series The Series are economy junction boxes for lighter duty applications. The 70, 80 and 90 feature snap on covers, while the 100, 150 and 190 feature 4 quick release screws. Enclosures are supplied
More informationAM Series Small Junction Boxes Lift-Off Screw Cover...4
Table of Contents AM Series Small Junction Boxes Lift-Off Screw Cover...4 AM Series Pushbutton Enclosures Inline Lift-Off Screw Cover...4 Multi-Hole Lift-Off Screw Cover...5 Multi-Hole Hinged Screw Cover...5
More informationPhone: Fax: Web: -
control series The larger ontrol Series offers standard features as well as full-panel access and all usable panel space. In addition, the standard grey cover is available with or without a full-length
More informationBocube. Colour: Graphite grey, similar to RAL 7024; light grey, similar to RAL 7035; special colours on request
Bocube Detailed product information can be found on www.bopla.de - Patented, innovative, hinged quick-release catch technology without screws: open with a screwdriver, close by hand - 22 sizes, 132 standard
More informationalso in ATEX Data Sheet Enclosures Klippon POK Glass Fibre reinforced Polyester Enclosures
Data Sheet Enclosures Klippon POK Glass Fibre reinforced Polyester Enclosures also in ATEX Weidmüller s established range of Klippon POK GRP (Glass Fibre reinforced Polyester) enclosures has been updated
More informationCatalog / 2016 North American Edition
Catalog 34 2015 / 2016 North American Edition without knockouts without knockouts without knockouts without knockouts PK Polycarbonate Housing Height inches (mm) Packs of 4.3 (110) 4.3 (110) 4.3 (110)
More informationFour new flat versions round off this innovative and successful IP 65 enclosure
Euromas ll Four new flat versions round off this innovative and successful IP 65 enclosure line. Made from either high-quality polycarbonate or from lower-priced ABS, this enclosure line offers a wide
More informationOperator Enclosures. Console Type 12 - AW-14 Data Sheet
Console Data Sheet Construction Console body, panel cover and door, top assembly and writing desk are fabricated from (14) gauge steel ll continuous welded seams are finished smooth Panel cover is secured
More informationEExe and EExi terminal boxes in polyester and aluminium for Ex areas
EExe and EExi terminal boxes in polyester and aluminium for Ex areas All BERNSTEIN polyester and aluminium enclosures are available in EExe and EExi versions T II 2 G EEx e II T6 or EEx e ia IIC T6 or
More informationKlippon TBi FS Fixing Screw
Klippon Ti S - ixing Screw Klippon Ti S ixing Screw Stainless steel enclosures for use within harsh industrial environments ven under moderate environmental conditions, there is an increasing need for
More informationSetting New Standards. Widest Sealing Range Maximum Strain Relief Superior Protection Rating. 94 CONTA-CLIP, Inc. (732)
Setting New Standards Widest Sealing Range Maximum Strain Relief Superior Protection Rating 94 CONTA-CLIP, Inc. (732) 564-0705 The principle benefits gland body Materials: Nickel plated brass Stainless
More informationControl Enclosures. Type 1, 3, 3R, 4X, 12 as designated. Type 1, 3, 3R, 4X, 12 as designated WT, HWT, FHLWT
Control Enclosures Stahlin s Control Enclosures are designed to accommodate electrical, electronic, instrumentation and mechanical controls indoors and outdoors where corrosion resistant watertight enclosures
More informationProduct Description. Junction Boxes...V1-V23 Meter and Instrument Enclosures...V24-V33
SECTION V INDEX Product Description Page Number Junction Boxes......................................V-V2 Meter and Instrument Enclosures.......................V24-V Control Centers.....................................V4-V9
More informationExplosionproof enclosures XPCJ series Cast aluminum steel control/junction box
1 TECHNICAL DATA SHEET Explosionproof enclosures XPCJ series Cast aluminum steel control/junction box XPCJ series series of explosionproof aluminum enclosures are typically used in the packaging of electrical/electronic
More informationC-Box Screw Cover with Knockouts NEMA 1. Commercial Enclosures Junction Boxes
C-Box Screw Cover with Knockouts Application Designed for general purpose indoor commercial use as a junction, pull or switch box. Standards UL-50 Type 1 cul Type 1 Complies with: NEMA Type 1 IEC 60529,
More informationW Series Cast Junction Box Options Boxes Available for Raintight, Watertight, or Submersible Applications
W Series Cast Junction Box Options Boxes Available for Raintight, Watertight, or Submersible Applications This table shows the optional items available on the different types of enclosures shown in this
More informationJunction box for EKL light
M EKL light Junction box Junction box for EKL light Features Chemical-resistant Temperature-resistant Flame-retardant Absolutely corrosion-proof Seawater-proof Description Polyester enclosures have proven
More informationEnclosure Mounting Screws For mounting enclosures through corner holes. Wood Screws
Combination Kits Used to combine series specific enclosures to make larger units. Connect horizontally or vertically. Fitting Type Combination Kit Threaded with locknut seal for connecting sidewalls. Fits
More informationEmpty enclosures IEC 62208
374 www.hensel-electric.de/en in accordance with for customized solutions and individual applications for example for low-voltage switchgear and controlgear assemblies i n accordance with the IEC 61439-series
More informationIP65 SEALED DUAL-COMPARTMENT ENCLOSURE
DXXX SERIES IP SEALED DUAL-OMPARTMENT ENLOSURE PRODUT INFORMATION different sizes of wall mounting cases with separate terminal compartment for you to use in measurement & control application. These cases
More informationSpec Tech Industrial Electric Control Enclosures
Control Enclosures N Stahlin s Control Enclosures are designed to accommodate electrical, electronic, instrumentation and mechanical controls indoors and outdoors where corrosion resistant watertight enclosures
More informationWallplates & Weather Protective Covers
SECTION C Wallplates & Weather Protective Covers Our broad offering of wallplates are the final touch for any application and are available in standard size, mid-size and oversize. Choose from a variety
More informationFlame-retardant PVC offers the protection you need.
Solid wall wiring duct Flame-retardant PVC offers the protection you need. Solid wall duct PVC Engineered to restrict wire access Constructed of flame-retardant PVC Improved flush sidewall and cover style
More informationNumber of PG holes. 1 x PG 9 (Ø 15.5) 12 x PG 13.5 (Ø 21) 1 x PG 9 (Ø 15.5) /300/400/ Rittal Catalogue 32/Industrial Enclosures
us enclosures G. us enclosures Enclosure:.38 Door:.5 IP 65 to EN 60 59/09.00, complies with NEMA. Door with l/h hinge, cam lock with double-bit insert, () support rail(s) S 35/7.5 (for G 586.). Drilled
More informationAlways a little more flexible: häwa enclosures. Industrie 4.0
Always a little more flexible: häwa enclosures häwa Industrie 4.0 ready Enclosures Is there actually an efficient solution in the häwa range of enclosures that complies with our requirements? The best
More information14x12x7 Inch 48 VDC (PoE) Power-Over-Ethernet Powered, Weatherproof & Insulated with Heating System - Model: NB H0N
14x12x7 Inch 48 VDC (PoE) Power-Over-Ethernet Powered, Weatherproof & Insulated with Heating System - Model: NB141207-4H0N Applications and Features Features: Molded Fiberglass Reinforced Polyester (FRP)
More informationSealed Enclosure Cooling Vortex Coolers
763.422.2600 SPEC-01031 C763.422.2211 COOLING SEALED ENCLOSURE COOLING VORTEX COOLERS Sealed Enclosure Cooling Vortex Coolers QUIET VORTEX A/C enclosure coolers, TYPE 4/4X/12 VA09, VA15, VA25 NEMA Type
More informationWall-Mount Enclosures
Wall-Mount Enclosures Protection When Safety Matters Most When selecting an enclosure, application can be associated with market or product. For example, is your enclosure going to be used in a petrochemical
More informationSTAINLESS STEEL CONDUIT SYSTEM WITH NPT THREADS
STAINLESS STEEL CONDUIT SYSTEM WITH NPT THREADS SILICONE GASKETS (FDA APPROVED) SMOOTH - EASY TO CLEAN (316) STAINLESS STEEL LID STAINLESS STEEL (316) BODY PATENTED 1 Stainless Steel NPT Conduit System
More informationNXT Series Enclosures
AEx Class I, Zone 1, AEx e IIC, T6 Features/Applications: The NXT series of enclosures available in two types of material finish have been designed to accommodate rail mounted terminals or other electrical
More informationPOLYLINE Polycarbonate Enclosures. From Allied Moulded Products, Inc. Experts in manufacturing nonmetallic enclosures for industrial applications
POLYLINE Polycarbonate Enclosures From Allied Moulded Products, Inc. Experts in manufacturing nonmetallic enclosures for industrial applications Table of ontents lick on the information located within
More informationJunction boxes for control, monitoring and control panel Ex tb
Junction boxes for control, monitoring and control panel - Zone 21, 22 - Category 2D - Aluminium, reinforced polyester or stainless steel enclosures - Standard or custom products Inspection window Padlockable
More informationULTRX, Type 4X. Panel Size. Conductive
Spec-00402 EPH FX (763) 422-2600 422-21 Non-Metallic Fiberglass Industry Standards Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File
More informationCarlon. Enclosures. Himeline * Enclosures. HS, HP and HLA/HLS Series Features. Applications. Standards
Himeline * HS, HP and HLA/HLS Series Features High-impact strength High dielectric strength Suitable for indoor and outdoor use Fully gasketed Lightweight Applications Instrument case Junction and terminal
More informationT38 1" T Form 7 Malleable Iron Conduit Body. Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T38 1" T Form 7 Malleable Iron Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
More informationAM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles
AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles Compatible with UL 1686 C1 Pin & Sleeve Devices Safer. Easier. Better. MENNEKES Non-Metallic MSR Switched and Interlocked
More informationFM8 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
More informationIndustrial Enclosures
Industrial Enclosures Small enclosures from page 08 Polycarbonate enclosures PK... 0 Cast aluminium enclosures GA... 4 Terminal boxes KL... 6 E-ox E... 9 us enclosures G... 0 RiLAN Industrial IN... 4 Compact
More informationVERONEX Cases MATERIAL PERFORMANCE CHARACTERISTICS. MECHANICAL PROPERTIES Units Test method Result. THERMAL PROPERTIES Units Test method Result
VERONEX Cases VERONEX is a breakthrough in plastic enclosure design, combining the versatility and functionality demanded by engineers, with the modern styling appreciated by their customers. The VERONEX
More informationIt s time to get connected with
It s time to get connected with The essence of quality NEW See pag e6 PRATLEY products and P NUTS are distributed exclusively in the UK by: Cable Connectors Ltd Product Brochure Aluminium Alloy (Corrosion
More informationArrow Hart. environment devices. Watertight, severe duty and corrosion resistant devices for harsh industrial environments
Eaton's Arrow Hart Complex environment devices Complex environment devices, severe duty and corrosion resistant devices for harsh industrial environments Arrow Hart NEMA and Non-NEMA quick reference guide
More informationJunction Boxes & Enclosures JBES and ECES Series: 316L Stainless Steel Enclosures Increased Safety
JBES Series Medium Voltage 11 kv ECES Series Compliance Data: ATEX - IEC: ATEX IEC CE Ex e II Ex ia IIC; Ex ib IIC T6 to T4 Ex td A21 T80 C to T130 C Ex de IIC; Ex demb IIC Operating Temperatures: -50
More informationTechnical data. Material e-reinforced polyester in grey or black. Seal Neoprene (CR) round cord (siliconized)
BERNSTEIN Series CP and CPS polyester enclosures are produced from highgrade e-reinforced polyester. Thanks to their reduced surface resistance (Ro < 109 Ohm), the black polyester enclosures meet the requirements
More informationVOLUME 15 LEADING THE WAY IN POLYCARBONATE ENCLOSURES PRODUCT CATALOG PREMIUM LINE IMPACT LINE GENESIS LINE CUSTOM PRODUCTS
VOLUME 15 LEADING THE WAY IN POLYCARBONATE ENCLOSURES P O L Y C A R B O N A T E & N O N - M E T A L L I C E N C L O S U R E S PRODUCT CATALOG PREMIUM LINE IMPACT LINE GENESIS LINE CUSTOM PRODUCTS INTEGRA
More informationThe Pushbutton Series
The The includes two separate enclosure designs, an in-line style and a multi-hole style configuration. oth are designed from fiberglass reinforced polyester and feature a continuous polyurethane gasket
More informationLB125A 1-1/4" LB Form 5 Aluminum Conduit Body. Dimensions and Weight STUD SIZE #10; 0.97 INCH LENGTH; INSULATION SUPPORT
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LB125A 1-1/4" LB Form 5 Aluminum Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
More information1000W and 2000W versions
503 FLOODLIGHT 126 600W HPS 1000W and 2000W versions The 503 is a high powered floodlight with a wide ambient temperature range. The high upper ambient and corrosion resistant aluminium constriction, make
More informationFM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC. : Conduit Bodies Applications Serve as pulling fittings. Make bends in conduit system. Provide
More informationCONTENTS INTRODUCTION. Company Profile QUALITY CERTIFICATE EN ISO 9001: NEXT - Steel Enclosure Range. Product specification.
CONTENTS INTRODUCTION Company Profile QUALITY CERTIFICATE EN ISO 9001: 2000. NEXT - Steel Enclosure Range Product specification. Product technical parameters. General arrangement drawing. Ex-Cell - Steel
More informationTABLE OF CONTENTS. Description Page Description Page. SETI Finland. Approvals:
3 ulletin 100 IEC Contactors ulletin 100 15 Sizes, 9 600 Guarded Terminals Dual Terminal Markings DC Control Option through 180 Wide Range of ccessories Top and Side Mounting uxiliary Contacts Timers Latches
More informationPratley Ezee-Fit Box Replacement Gaskets Replacement Gasket for the Pratley Ezee-Fit Box
Pratley Ezee-Fit Box Covers Ex e/n Either standard or polycarbonate (transparent) Supplied complete with stainless steel cheese head screws and rubber gasket ready to fit Pratley Ezee-Fit Box Replacement
More informationAC METRIC (IEC) MOTORS THREE PHASE
These high efficiency motors meet North American performance standards and EPACT energy efficiency mandates, and have.5 service factors. Typically used for replacement on machine tools, textile machinery
More informationBaying systems TS 8. Height: 1200 mm/1400 mm, depth: 500 mm
Baying systems TS 8 System accessories Page 537 TS 8 corner enclosures Page 583 TS 8 stainless steel Page 194 TS 8 EMC-shielded Page 200 Material: Enclosure frame, roof, rear panel and gland plates: Sheet
More informationTS93 EMF T/PT/TDE. Surface applied door closer
TS9 EMF T/PT/TDE Surface applied door closer Installation instructions: Pull side track mount door closer (no smoke detector) (EMF T) Push side track mount closer (no smoke detector) (EMF PT) Double egress
More informationFM9 Aluminum Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections for branch runs. Permit access to conductors
More informationGeneral characteristics
Multipole Industrial Connectors General characteristics The multipole connectors for industrial purposes are used in electric and electronic machinery, robots, electric panels, control equipments and wherever
More informationTS9356 PKT 90/119. Surface applied door closer. Installation instructions: Pocket door track mount in 90 /119 pocket (Closer on wall)
TS96 PKT 90/9 Surface applied door closer Installation instructions: Pocket door track mount in 90 /9 pocket (Closer on wall) TABLE OF CONTENTS Closer overall Technical specifications Door templates Closer
More informationWeather Protective Devices
Weather Protective Devices N Industrial Specification Grade Receptacle Covers N-1, N-2 Weather Protective Devices N-3 Power-Lock Receptacles and Flanged Inlets with Weather Protective Lift Lids N-4 50
More informationSTX stainless steel boxes
STX stainless steel boxes Enclosure and door manufactured from AISI 304 stainless steel (AISI 316 on request). Mounting plate manufactured from 2.5mm sendzimir sheet steel. Hinge in stainless steel. Box
More informationThe Weidmüller Catalogue System Industry 2002
The Weidmüller Catalogue System Industry 2002 1 5 Sectional catalogue 1: Terminals 2002 W-Series Z-Series IDC-Series SAK-Series Ex Terminals - ATEX Terminals in power supply applications KLBÜ shield connection
More informationForm 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit.
For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing.
More informationHelaGuard. Non-Metallic Conduit & Fittings
HelaGuard Non-Metallic Conduit & Fittings HelaGuard Non-Metallic Conduit Systems Page HelaGuard Overview 3 Conduit Application Overview 4 Mounting & Removing HelaGuard Non-Metallic Fittings 5 HelaGuard
More informationRittal North American Industrial Buyer s Guide
Rittal North American Industrial Buyer s Guide Table of Contents Enclosures Small Enclosures...10 Compact Enclosures...31 Freestanding Enclosure Systems...49 Console Systems / PC Systems / Industrial
More informationSwitches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
More informationAbox-i Series. petrochemical plants, steel mills and railways.
Series Series (formerly the Nautic Series) junction boxes for harsh environments are supplied complete with terminal blocks. These enclosures can be used wherever extreme conditions are encountered: offshore
More informationIndustrial and Commercial Duty IEC Motors
Industrial and Commercial Duty IEC Motors A Regal Brand Five product families delivering a world of opportunity LEESON Passport Series IEC Motors. There s a world of opportunity right here at home. The
More informationReliable Protection. Simplified Wiring. CI-K enclosure system
CI-K small enclosures www.eaton.eu/ci-k Reliable Protection. Simplified Wiring. CI-K enclosure system The CI-K Enclosure System Reliable Protection. Simplified Wiring. The main job of an enclosure is to
More informationVents & Fuel Fittings. Vents & Ventilators Collector Boxes Pitot Tube Shield Deck Plates Deck Plate Keys
7 Vents & Ventilators Collector Boxes Pitot Tube Shield Deck Plates Deck Plate Keys Hose Adapter Drains Deck Fills Deck Fill Keys Gas Tank Vents Ski Tows Vents & Fuel Fittings 7 Vents & Fuel Fittings LOUVERED
More informationRittal Small Enclosures
Rittal Small Enclosures Fast and perfect, with an exceptionally diverse range of system accessories R The original is still the best! Packaging technology for the future Whether you require enclosures
More informationTechnical Data Sheet :
Technical Data Sheet : Die-cast Aluminium Enclosure Material: AI Si 12, as per DIN EN 1706 Components: Fastening threads M4 / M6 in the enclosure bottom. Ingress protection: IP66 / IP67 / IP68 as per IEC
More informationINSULGRIP Plugs and Connectors
INSULRIP Plugs and Connectors INSULRIP Plugs and Connectors Technical Information HBL5266C HBL5269C INSULRIP Plugs and Connectors Specifications Plug Part Description Typical Specification Catalog No.
More information