Exceeds Industry Specifications Engineered in Canada Proof Tested TITANMARINEPRODUCTS.COM. titanmarineproducts.com CANADA METAL (PACIFIC) LTD

Transcription

1 Exceeds Industry Specifications Engeered Canada Proof Tested TITANMARINEPRODUCTS.COM CANADA METAL (PACIFIC) LTD

2 01 Table of Contents Table of Contents 01 ISO High Test Wdlass Cha G43 02 DIN766 Wdlass Cha G30 03 BBB Wdlass Cha G30 04 Grade L Wdlass Cha G30 05 ISO Proof Coil Cha G30 General Purpose / Anchor Cha 06 Moorg Cha Long Lk G43 07 Premium Staless Steel Cha D Premium Staless Steel Cha Anchor Rode 10 Double Braided Anchor Rode 11 Eight Strand Plaited Anchor Rode 11 Three Strand Anchor Rode 12 Dock Le 13 Fender Le 14 Hot Dip Galvanized Shackles 15 High Strength Hot Dip Galvanized Shackles 16 Sterndrive Installation Jack & Accessories 17 Self-Rightg Anchor Swivels 18 Cha Packagg Options and Merchandisg Solutions 19 *The descriptions and guideles shown this literature should be used as a general reference only. For any further technical formation please contact our Technical Service. Contents of this Brochure/Catalog are based on the latest formation available at the time of publication. CMP / Titan assumes no responsibility for the accuracy of the formation contaed here. Product specifications are subject to change without notice.

3 02 ISO High Test Wdlass Cha G43 Please see Page 19 for Packagg Details G43 Embossed/ft TRADE WIRE DIAMETER INSIDE DIMENSIONS WIDTH WORKING LOAD LIMIT kg-force poundforce 1/ / / / / TRADE HALF DRUM FINISH: Hot Dip Galvanized PACKAGING: Full and Half Drums Exceeds NACM, RR-C-271D specifications ISO High Test Cha uses high tensile strength carbon steel that provides a greater strength-to-weight ratio than proof coil cha. ISO short pitch lks make it more flexible and ideally suited as a wdlass cha. Each lk is proof tested and calibrated. Check manufacturer s specification prior to purchase. FULL DRUM WEIGHT WEIGHT kg lb m ft kg lb m ft 1/ / / / / / Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications

4 03 DIN 766 Wdlass Cha G30 Please see Page 19 for Packagg Details D766 Embossed/ft DIN766 cha uses a low carbon steel cha specifically designed for anchorg applications. Hot dip galvanized short lk cha, calibrated to latest DIN766 standard. Each lk is calibrated to ensure proper fit for most metric wdlasses. Check manufacturer s specification prior to purchase. TRADE WIRE DIAMETER INSIDE DIMENSIONS WORKING LOAD LIMIT WIDTH kg-force pound-force P P TRADE FINISH: Hot Dip Galvanized PACKAGING: Full Drums Exceeds NACM, RR-C-271D specifications FULL DRUM kg lb / m / ft P P Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications

5 04 BBB Wdlass Cha G30 Please see Page 19 for Packagg Details BBB Embossed/ft BBB is a low carbon steel cha designed with short, compact calibrated lks suitable for wdlasses and general anchorg. Check manufacturer s specification prior to purchase. TRADE WIRE DIAMETER INSIDE DIMENSIONS WORKING LOAD LIMIT WIDTH kg-force pound-force 1/ / / TRADE WEIGHT FINISH: Hot Dip Galvanized PACKAGING: Full Drums Exceeds NACM, RR-C-271D specifications FULL DRUM kg lb m ft 1/ / / Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications

6 05 Grade L Wdlass Cha G30 Please see Page 19 for Packagg Details L Embossed/ft Grade L is a low carbon steel cha specifically manufactured to Australian Standard AS Used for anchorg and moorg applications, Grade L calibrated short-lk design ensures proper fit for most Australian wdlasses. Check manufacturer s specification prior to purchase. TRADE TRADE WIRE DIAMETER INSIDE DIMENSIONS WORKING LOAD LIMIT WIDTH FINISH: Hot Dip Galvanized PACKAGING: Full & Half Drums, Pails Exceeds NACM, RR-C-271D specifications kg-force PLASTIC PAIL HALF DRUM FULL DRUM WEIGHT WEIGHT WEIGHT kg lb m ft kg lb m ft kg lb m ft pound-force Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications

7 06 ISO Proof Coil Cha G30 General Purpose/Anchor Cha Please see Page 19 for Packagg Details G30 Embossed/ft ISO Proof Coil Cha is low carbon steel general purpose/anchor cha with an ISO short pitch lk. It is used applications where high tensile strength is not required. TRADE IN TRADE IN FINISH: Hot Dip Galvanized PACKAGING: Full&Half Drums, Pails Exceeds NACM, RR-C-271D specifications WIRE DIAMETER INSIDE DIMENSIONS WORKING LOAD LIMIT WIDTH kg-force PLASTIC PAIL HALF DRUM FULL DRUM WEIGHT WEIGHT WEIGHT kg lb m ft kg lb m ft kg lb m ft pound-force 3/ / / / / / / / / / / / / / Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications

8 07 Moorg Cha Long Lk G43 G43 Embossed/ft FINISH: Hot Dip Galvanized PACKAGING: Full Drums Exceeds NACM, RR-C-271D specifications Please see Page 19 for Packagg Details High tensile strength moorg cha with long lks that allows the use of shackles. TRADE WIRE DIAMETER INSIDE DIMENSIONS WIDTH WORKING LOAD LIMIT kg-force pound-force 3/ / / / TRADE WEIGHT FULL DRUM kg lb m ft 3/ / / / Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications

9 08 Premium Staless Steel Cha Please see Page 19 for Packagg Details D766 Embossed/ft TRADE INSIDE / WIDTH BREAKING STRENGTH kn WORKING LOAD LMT kn WEIGHT kg/lb FINISH: Polished Staless Steel PACKAGING: Full&Half Drums, Pails DIN 766 WINDLASS specification DIN 766 Wdlass Staless Steel Cha G60. AISI 316L Staless Steel Cha is designed to offer superior corrosion resistance, appearance and strength. Made Germany, each lk is precisely calibrated to meet current DIN 766 wdlass specifications, and manufactured with an extra treatment to provide exceptionally smooth and clean surfaces. Please check manufacturer s specification prior to use. PAIL HALF DRUM FULL DRUM m/ft WEIGHT kg/lb m/ft WEIGHT kg/lb / /53 35/ /77 50/ / / / /97 35/ / /137 50/ / / / / /97 35/ / /159 35/ / / /328 m/ft Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications

10 09 Premium Staless Steel Cha Please see Page 19 for Packagg Details 4565 Embossed/ft FINISH: Polished Staless Steel PACKAGING: Full&Half Drums ISO 4565 WINDLASS specification ISO 4565 Wdlass Staless Steel Cha G60 316L. AISI 316L Staless Steel Cha is designed to offer superior corrosion resistance, appearance and strength. Made Germany, each lk is precisely calibrated to meet current ISO 4565 wdlass specifications, and manufactured with an extra treatment to provide exceptionally smooth and clean surfaces. Please check manufacturer s specification prior to use. TRADE INSIDE INSIDE WIDTH BREAKING STRENGTH kn WORKING LOAD LIMIT kn HALF DRUM WEIGHT kg/lb m/ft WEIGHT kg/lb FULL DRUM m/ft / / /352 50/ /176 25/ /246 35/115 Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications

11 10 Anchor Rode What is the difference between twisted and braided anchor rope? When buyg anchor rope, you are likely to encounter two types of nylon rope: twisted and braided. All nylon rope makes an excellent choice for anchor rope and the difference between braided rope and twisted rope really comes down to stiffness and whether you need to splice the rope or not. Dependg on the size and type of your boat, your choices are an all-rope anchor rode, combation rope/cha, or all cha. Rope should be nylon, either three-strand or braided. Nylon rope is elastic, makg it a great shock absorber for sudden loads caused by wd and waves. Three-strand le should be medium lay, which has more twists per foot than soft lay. This is particularly important for use with a wdlass, as the soft lay strands can untwist and separate, foulg the equipment. Three-strand rope can become awkward to handle, especially when hardened by salt saturation. An occasional bath fabric softener will help to keep it supple. Cha, used alone or combation with rope, offers great benefits: it decreases the angle of pull on the anchor allowg it to set and hold more effectively, it s unaffected by chafe from rocks or sharp surfaces on the bottom, its weight forms a curve that absorbs shock loads heavy weather. Hi-Test cha is made from higher carbon steel that has been surface-hardened. It has a higher strength-to-weight ratio than proof coil and is favoured by the weight-conscious, as it can reduce the weight the bow by up to 30% without sacrificg strength. Twisted Braided More stiff and less flexible Fairly easy to splice Generally less expensive Has more stretch than braided Has a tendency to kk or heckle Less stiff and more flexible Difficult to splice Looks better Easier on the hands Frequently stronger than twisted rope Less stretch than twisted rope Suggested Mimum Workg Rode Sizes* (For wds up to 30 knots.) BOAT BEAM (SAIL ) BEAM (POWER) ROPE (NYLON) CHAIN (HI-TEST) 10~15' 5~7' 5~7' 150-1/2 1/4 20~25' 8' 9' 150-1/2 1/4 26~30' 9' 10' 200-1/2 1/4 31~35' 10' 11' 200-9/16 5/16 36~40' 12' 13' 250-9/16 5/16 41~45' 13' 14' 250-5/8 3/8 46~50' 14' 16' 300-5/8 3/8 51~60' 16' 19' 350-3/4 1/2

12 11 Double Braided Anchor Rode (With G4 HT Cha) ROPE CHAIN BREAKING STRENGTH SAFE WORKING LOAD DIA WIRE DIA TOTAL lb / kg / kn lb / kg / kn /2"/12 150'/45m 1/4"/6 15'/5m 165'/50m 8100/3670/ /735/ /2"/12 200'/ 60m 1/4"/6 15'/5m 215'/65m 8100/3670/ /735/ /2"/12 250'/75m 1/4"/6 15'/5m 265'/80m 8100/3670/ /735/ /2"/12 300'/90m 1/4"/6 20'/6m 320'/96m 8100/3670/ /735/ /16" /14 150'/45m 5/16"/8 15'/5m 165'/50m 10400/4700/ /940/ /16"/14 250'/75m 5/16"/8 15'/5m 265'/80m 10400/4700/ /940/ / 16"/14 300'/90m 5/ 16"/ 8 20'/6m 320'/96m 10400/4700/ /940/ / 8"/16 300'/90m 3/ 8"/10 20'/6m 320'/96m 13500/6100/ /1220/ /8"/16 150'/45m 5/16"/8 15'/5m 165'/50m 13500/6100/ /1220/ /8"/16 200'/60m 5/16"/8 15'/5m 215'/65m 13500/6100/ /1220/ /8"/16 250'/75m 5/16"/8 20'/6m 265'/80m 13500/6100/ /1220/ /8"/16 300'/90m 5/16"/8 20'/6m 320'/96m 13500/6100/ /1220/ /8"/16 150'/45m 3/8"/10 15'/5m 165'/50m 13500/6100/ /1220/ /8"/16 200'/60m 3/8"/10 15'/5m 215'/65m 13500/6100/ /1220/ /8"/16 250'/75m 3/8"/10 20'/6m 265'/80m 13500/6100/ /1220/ /8"/16 300'/90m 3/8"/10 20'/6m 320'/96m 13500/6100/ /1220/12 Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications Eight Strand Plaited Anchor Rode (With G4 HT Cha) ROPE CHAIN BREAKING STRENGTH SAFE WORKING LOAD DIA WIRE DIA TOTAL lb / kg / kn lb / kg / kn /2 / /45m 1/4 /6 15 /5m 165 /50m 5670/2522/ /504/ /2 / /60m 1/4 /6 15 /5m 215 /65m 5670/2522/ /504/ /2 / /75m 1/4 /6 15 /5m 265 /80m 5670/2522/ /504/ /2 / /90m 1/4 /6 20 /6m 320 /96m 5670/2522/ /504/ /2 / /45m 1/4 /6 25 /7.5 m 175 /53m 5670/2522/ /504/ /2 / /45m 1/4 /6 50 /15m 200 /60m 5670/2522/ /504/ /2 / /60m 1/4 /6 50 /15m 250 /75m 5670/2522/ /504/5

13 12 Eight Strand Plaited Anchor Rode (With G4 HT Cha) ROPE CHAIN BREAKING STRENGTH SAFE WORKING LOAD DIA WIRE DIA TOTAL lb / kg / kn lb / kg / kn /2 / /45m 1/4 /6 50 /15m 200 /60m 5670/2522/ / 504/ /2 / /60m 1/4 /6 50 /15m 250 /75m 5670/2522/ / 504/ /2 / /75m 1/4 /6 50 /15m 300 /90m 5670/2522/ / 504/ /8 / /45m 5/16 /8 25 /7.5 m 175 /53m 11650/5200/ /1040/ /8 / /45m 5/16 /8 50 /15m 200 /60m 11650/5200/ /1040/10 Three Strand Anchor Rode (with G4 HT Cha) /8 / /60m 5/16 /8 50 /15m 250 /75m 11650/5200/ /1040/ /8 / /75m 5/16 /8 50 /15m 300 /90m 11650/5200/ /1040/10 Three Strand Anchor Rode (With G4 HT Cha) ROPE CHAIN TOTAL BREAKING STRENGTH SAFE WORKING LOAD DIA WIRE DIA lb / kg / kn lb / kg / kn /2"/12 150'/45m 1/4" 6 15'/5m 165'/50m 7500/3400/ /680/ /2"/12 200'/60m 1/4"/6 15'/5m 215'/65m 7500/3400/ /680/ "/12 300'/90m 1/4" 6 20'/6m 320'/97m 7500/3400/ /680/ / /45m 1/4 /6 25 /7.5 m 175 /53m 7500/3400/ /680/ / /45m 1/4 /6 50 /15m 200 /60m 7500/3400/ /680/ / /60m 1/4 /6 50 /15m 250 /76m 7500/3400/ /680/ / /75m 1/4 /6 50 /15m 300 /91m 7500/3400/ /680/ /16"/14 150'/45m 5/16"/8 15'/5m 165'/50m 8800/3995/ /799/ /16"/14 200'/60m 5/16"/8 15'/5m 215'/65m 8800/3995/ /799/ /16"/14 250'/75m 5/16"/8 20'/6m 265'/80m 8800/3995/ /799/ /16"/14 300'/90m 5/16"/8 20'/6m 320'/97m 8800/3995/ /799/ /16"/ /45m 5/16"/8 25 /7.5 m 175 /53m 8800/3995/ /799/ /16"/ /45m 5/16"/8 50 /15m 200 /60m 8800/3995/ /799/ /16"/ /60m 5/16"/8 50 /15m 250 /76m 8800/3995/ /799/ /16"/ /75m 5/16"/8 50 /15m 300 /91m 8800/3995/ /799/ /8"/16 200'/60m 5/16"/8 15'/5m 215'/65m 11650/5200/ /1040/ /8 / /45m 5/16 /8 25 /7.5 m 175 /53m 11650/5200/ /1040/ /8 / /45m 5/16 /8 50 /15m 200 /60m 11650/5200/ /1040/ /8 / /60m 5/16 /8 50 /15m 250 /76m 11650/5200/ /1040/ /8 / /75m 5/16 /8 50 /15m 300 /91m 11650/5200/ /1040/ /8"/16 300'/90m 5/ 16"/8 15'/5m 320'/96m 11650/5200/ /1040/10 Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications

14 13 Dock Le Titan Nylon Dock Les have a water-resistant coatg to prevent strength loss that occurs wet conditions. Higher twistg of yarns and strands produces a denser, rounder rope with higher abrasion resistance that is less likely to snag. Controlled manufacturg ensures a le that is well balanced, torque free and won t unlay under heavy loadg. Three Strand Dock Les Maximize shock absorption Superior wet and dry abrasion resistance A good choice for permanent dock les Double Braided Dock Les Softer and easier to handle,cleat and coil Stronger than comparable 3-strand dock les Best choice for dock les to carry onboard port to port (WHT) 3/8 (10) 10'(3m) (WHT); (BLK) 3/8 (10) 15'(5m) AVG. STRENGTH dia length kg lb (WHT); (BLK) 3/8 (10) 20'(6m) Three Strand Double Braided (WHT); (BLK) 3/8 (10) 25'(8m) (WHT) 3/8 (10) 30'(9m) (WHT); (BLK) 1/2 (13) 15'(5m) (WHT); (BLK) 1/2 (13) 20'(6m) (WHT); (BLK) 1/2 (13) 25'(8m) (WHT); (BLK) 1/2 (13) 30'(9m) (WHT) 1/2 (13) 35'(11m) (WHT); (BLK) 5/8 (16) 20'(6m) (WHT); (BLK) 5/8 (16) 25'(8m) (WHT); (BLK) 5/8 (16) 30'(9m) (WHT); (BLK) 5/8 (16) 35'(11m) (WHT) 3/4 (19) 25'(8m) (WHT); (BLK) 3/4 (19) 30'(9m) (WHT); (BLK) 3/4 (19) 35'(11m) (W G); (BLK); (NAV) 3/8 (10) 10 (3m) (W/G); (BLK); (RED); (BLU); (NAV) 3/8 (10) 15'(5m) (W/G); (BLK); (RED); (BLU); (NAV) 3/8 (10) 20'(6m) (W/G); (BLK); (RED); (BLU); (NAV) 3/8 (10) 25'(8m) (BLK) 3/8 (10) 30 (9m) (BLK), (NAV), (W/G) 1/2 (13) 10 (3m) (BLK); (W/G); (NAV) 1/2 (13) 15'(5m) (BLK); (BLU); (NAV); (W/G); (RED); (TEAL) 1/2 (13) 20'(6m) (BLK); (BLU); (NAV); (W/G); (RED) 1/2 (13) 25'(8m) (BLK); (W/G) 1/2 (13) 30'(9m) Eye splice specifications: 3/8 x 10 ft: 12 (305); 1/2 x 10 ft 1/2 x 30 ft: 12 (305); 5/8 x 15 ft 5/8 x 35 ft: 15 (381); 3/4 x 20ft 3/4 x 50 ft: 18 (457 ).

15 14 Dock Le avg. strength dia length kg lb (BLK); (NAV); (W/G) 5/8 (16) 15'(5m) (BLK); (NAV); (W/G) 5/8 (16) 20'(6m) (BLK); (NAV); 106; (W/G); 5/8 (16) 25'(8m) (BLK); (NAV); (W/G); 5/8 (16) 30'(9m) Double Braided (BLK); (NAV); (W/G) 5/8 (16) 35 (11m) (BLK); (NAV); ((W/G) 3/4 (19) 20'(6m) (BLK); (NAV); (W/G) 3/4 (19) 25'(8m) (BLK); (NAV); (W/G) 3/4 (19) 30'(9m) (BLK); (NAV) (W/G) 3/4 (19) 35 (11m) (BLK); (NAV); (W/G) 3/4 (19) 50 (15m) Fender Le Titan Premium Fender Le features: Low stretch polypropylene (PP) material Will float water Hand crafted 6-ch (152 ) eye splice Easy to handle Shock absorbent Can be stored wet Variety of colors & sizes to choose from Double Braided Three Strand BREAKING LOAD COLOR DIA kg lb 6 (1.8 m) NAVY (1.8 m) WHITE/GOLD (1.8 m) BLACK 5/16 (8) (1.8 m) BLUE (1.8 m) WHITE (1.8 m) RED (1.8 m) BLACK (1.8 m) NAVY (1.8 m) BLUE 3/8 (10) (1.8 m) WHITE (1.8 m) WHITE/GOLD (1.8 m) RED /16 (8) 6 (1.8 m) WHITE /8 (10) 6 (1.8 m)

16 15 Hot Dip Galvanized Shackles FINISH: Hot Dip Galvanized PACKAGING: Individually labeled & bagged Easily identifiable copper colored p Anchor and Cha types Proof tested & load rated Workg load limit, size, logo stamped on every shackle Anchor Type BAIL PIN Exceeds RR-C-271 Type IV Grade A All of our Mare Shackles are Hot Dip Galvanized for premium corrosion resistance. Hot dip galvanized coatg on both the shackle & p. WORKING LOAD LIMIT BREAKING LOAD kn lb kg kn lb kg /4 6 5/ /16 8 3/ /8 10 7/ / / /2 13 5/ /8 16 3/ /4 19 7/ / / / / / / / / /4 6 5/ /16 8 3/ Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications /8 10 7/ / / /2 13 5/ Cha Type /8 16 3/ /4 19 7/ / / / / / / / /

17 16 High Strength Hot Dip Galvanized Shackles FINISH: Hot Dip Galvanized PACKAGING: Individually labeled & bagged Anchor Type Cha Type BAIL PIN WORKING LOAD LIMIT Exceeds RR-C-271 Type IV Grade B All of our Mare Shackles are Hot Dip Galvanized for premium corrosion resistance. Hot dip galvanized coatg on both the shackle & p. Breakg strength exceeds that of high test G4 cha >30% stronger than standard Grade A shackles Bold black colored p Anchor and Cha types Proof tested & load rated Workg load limit, size, logo stamped on every shackle BREAKING LOAD kn lb kg kn lb kg /16 8 3/ /8 10 7/ / / /2 13 5/ /8 16 3/ /4 19 7/ / / / / / / / / /16 8 3/ /8 10 7/ / / /2 13 5/ /8 16 3/ /4 19 7/ / / / / / / / / Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications

18 17 Sterndrive Installation Jack PID:CMJACKV1 Hydraulic jack for ease of use, even with one operator 4 Pneumatic wheels allow easy movement the shop/yard Allows for easy and safe removal and stallation of stern drives 3-Axis adjustment for proper alignment and configuration Heavy duty liftg capacity WEIGHT kg/lb DIMENSIONS (L X W X H) PACKAGING (CRATE) DIMENSIONS (L X W X H) WORKING LOAD LIMIT Net Gross kg lb 74/163 82/ x810x860 53x32x x825x20 48x32x Sterndrive Installation Jack Wheels PID:CMJACKFW PID:CMJACKRW

19 18 Self-Rightg Anchor Swivels Duplex Staless Steel Swivels provide self-rightg function if the anchor comes up upside-down, it will flip it over to the correct orientation. Streamled shape provides smooth retrieval over the bow roller Manufactured from high strength Duplex Staless Steel highly corrosion resistant and much stronger than 316L Attaches directly to anchor Models for anchors from 20-88lb (9-40kg) Rocna, Vulcan, and some plows Models for imperial and metric chas from 1/4 to 7/16 (7-11) PID ANCHOR SLOT WIDTH CHAIN SLOT WIDTH TS31SUK TS31SUK TS31SUK TS31SUK ANCHOR kg Vulcan 9-12, Rocna Plough 10-16, Vulcan 15 Vulcan 20, Rocna 20, Plough 20 Rocna 25-33, Vulcan 25 CHAIN BREAKING STRENGTH lb WORKING LOAD lb 1/4",5/16",7, /4",5/16",7, /16", /16", 3/8", Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications TS31SUK Vulcan 33-40, Rocna 40 5/16", 3/8",11,7/16"

20 19 Cha Packagg Options and Merchandisg Solutions PACKAGING OPTION DIAMETER HEIGHT cm cm Full Drum 16½ Half Drum 16½ Plastic Pail 12 x 9½ 30.5 x ½ 36.8 Full Drum Half Drum Plastic Pail 6-Pail Display PID: Our space-savg, cha merchandiser is built tough to hold over 660 lb (300 kg) of cha with its small footprt. Each shelf is specially designed and custom fitted to lock pails to place to ensure stability and safety. Includes heavy-duty casters. Shelves are custom fitted to lock pails to place to ensure safety and stability. 42 1/8 107 cm 15½ 39.4 cm 7 1/ cm cm 13 3/8 34 cm CMTITANBRO V2